DVRCMS.Com

Blue Iris Quick Start Guides 2024

admin — Sun, 28 Apr 2024 07:07:25 +0000

Blue Iris Quick Start Guides 2024, Video Management Software Use up to 64 cameras (webcams, network IP cams, analog cards, or your Windows PC desktop). Capture JPEG snapshots or movies in standard MP4, AVI, advanced DVR, or Windows Media file formats.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option ( ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

• Pentium dual-core or equivalent 2GHz processor or better

• 2GB or more system RAM

• Microsoft Windows 7 or newer OS (equivalent server OS as well)

• One or more USB or Network IP cameras, or an analog capture card with DirectShow drivers

Recommendations When Using Many and/or HD Cameras

• Intel core i7 with QuickSync for hardware decoding

• 8GB or more RAM

• Microsoft Windows 10 64 bit

• nVIDIA graphics adaptor for efficient screen display

• 7200+ RPM drives and/or SSD drive

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu ( )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu ( ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

• Pentium dual-core or equivalent 2GHz processor or better

• 2GB or more system RAM

• Microsoft Windows 7 or newer OS (equivalent server OS as well)

• One or more USB or Network IP cameras, or an analog capture card with DirectShow drivers

Recommendations When Using Many and/or HD Cameras

• Intel core i7 with QuickSync for hardware decoding

• 8GB or more RAM

• Microsoft Windows 10 64 bit

• nVIDIA graphics adaptor for efficient screen display

• 7200+ RPM drives and/or SSD drive

Compatible with the Following Brands:

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note: Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu. Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

Amcrest Orion review and installation guide 2024

admin — Sun, 28 Apr 2024 06:53:16 +0000

Amcrest Orion review and installation guide 2024, This software the most stable and recommended method of accessing your devices from your computer. It is free software provided by Amcrest that can provide a means of accessing all your devices in one central location without the use of a plugin or web browser.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file. Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed. Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings ( )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon ( ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon ( ) for the device. Select Video Channel and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit ( ) icon and name the tour. Click the checkmark ( ) when finished.

Note: Click the Go icon ( ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the icon and select the Edit ( )icon.

Step 4: Enter a name for the tour and click the add ( ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play ( ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop ( ) icon in the Tour ( )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon ( )

How to setup The Guarding Vision

admin — Wed, 02 Aug 2023 06:17:55 +0000

How to setup The Guarding Vision , The Guarding Vision app is designed to work with DVRs, NVRs and IP cameras which support Cloud P2P function. It allows you to live view your cameras remotely. All you need to do is creating an account and adding device into the account, then you can enjoy the real-time video from cameras on a global scale. It also allows you to play back recorded video to search every milestone of your life. When motion detection alarm of your device triggered, you can get an instant message notification from Guarding Vision app.

How to setup The Guarding Vision Application with your Arcdyn Surveillance System

One of the first things you’ll want to do when setting up your Arcdyn Camera System is to be able to view it on your mobile device or tablet.

Below is a comprehensive guide to walk you through the process of configuring the connection to Guarding Vision on your recorder, setting up your Guarding VIsion Account, logging into your Guarding Vision account in the app, and adding your system so you can view your cameras remotely.

HOW TO ENABLE PLATFORM ACCESS VIA YOUR HDMI DISPLAY

Make Sure that Platform Access is enabled and the status is Online. This video guide will walk you through how to accomplish this at the NVR/DVR with a monitor and mouse attached.

If the status is offline, double check your DNS Server settings. You can set this to the gateway IP of the device or use 8.8.8.8 (Primary) and 8.8.4.4 (Secondary) which are provided for free by google.

STEP 1: ENABLE PLATFORM ACCESS ON YOUR RECORDER

You have two options. Access your NVR with your web browser or use a screen and mouse connected directly to your NVR.

Via Web Browser

Via HDMI Display

STEP 2: CREATE A GUARDING VISION ACCOUNT

There are two options to create your new Guarding Vision account. You can do this either in a web browser by going to guardingvision.com or inside the Guarding Vision App

On Guardingvision.com

Via The Guarding Vision Mobile Application

STEP 3: ADD YOUR DEVICE TO YOUR GUARDING VISION ACCOUNT AND VIEW YOUR CAMERAS

Guarding Vision Phone App

HOW TO ENABLE PLATFORM ACCESS VIA WEB BROWSER

For your device to be able to connect to the cloud viewing platform, you must enable Platform Access

This guide will walk you through the steps to accomplish this using your computer and a webbrowser

**NOTE** This guide requires that your recorder be connected to your network, configured with an IP address, and have access to the internet.

Step One

Using Internet Explorer (on PC) or Safari (on Mac) got to the IP Address you’ve assigned to your recorder and Login. If you have not changed the password, the default login info is Username: admin & password: admin12345. We strongly suggest that you change the admin password to something other than the default as default passwords are very insecure.

Step Two

Once logged in, click on the configuration menu in the top black bar.

Step Three

In the left menu, click on Network > Basic Settings. At the bottom of this page, check the Perferred DNS Server & Alternate DNS Server fields. If both are blank, enter in the devices gateway IP address OR Google’s free DNS servers (8.8.8.8 and 8.8.4.4). Then Click Save.

Step Four

Next, in the left menu click on Network > Advanced Settings > Platform Access. Click the Checkbox marked ‘Enable’ to enable platform access. Click Save.

Step Five

Wait for your recorder to reboot then log back in.

Step Six

Navigate back to Configuration > Network > Advanced Settings > Platform Access and confirm that the Register Status now says ‘Online’

That’s it! You are now ready to move to the next step of adding your recorder to your cloud account.

HOW TO CREATE A GUARDING VISION ACCOUNT ON GUARDINGVISION.COM

Step One

Go to guardingvision.com and click “Register”

Step Two

Fill out your desired username, password, and select your country. If you’re in The United States, select ‘America’ across the top, then scroll down to find USA

Step Three

Select ‘OK’ to confirm your country.

Step Four

Type in your email address (it is not recogmended to register via your phone # as it can make resetting your password difficult. Then, type in the captcha verification code and hit next.

Step Five

You will receive an email with a time sensitive, 4 digit email verification code. Retreive this code from your email return to your web browser.

Step Six

Enter the code into the prompt on guardingvision.com

Step Seven

You will be forwarded to your account info page. Great Job! You are now registered with an account on guardingvision.com, you can now move on the adding your device to your Guarding Vision App.

HOW TO CREATE AN ACCOUNT VIA THE GUARDING VISION APP

Step One

Download Guarding Vision for your Apple or Android device.

Step Two

Tap Guarding Vision icon on the bottom bar.

Step Three

Tap the login button

Step Four

Tap the Register link

Step Five

Tap register by e-mail

Step Six

Select the region

Step Seven

In the top right hand corner tap finish

Step Eight

Enter your e-mail

Step Nine

Enter the code you recieved in your e-mail

Step Ten

Create your username and password

Step Eleven

Tap the plus symbol

Step Twelve

Scan the QR code on the NVR. If you are not sure how to find the QR code on your NVR/DVR watch the video at the top of the page.

Step Thirteen

Tap the Add Button

Step Fourteen

Tap the checkmark

Step Fifteen

Tap a camera to start live view

APP SETUP DDNS WITH GUARDING VISION

For the DDNS to work properly you will need to have the NVR/DVR or camera correctly Port Forwarded.

Step One

Tap the Device icon on the bottom bar.

Step Two

Tap the plus icon in the top right, and then tap manual adding

Step Three

In the Alias Field enter a name for your system such as Business NVR.

Step Four

Tap the register mode and select Guarding Vision Domain

Step Five

Tap the Device Domain and the select the recorder in the list.

Step Six

Enter the Username and Password for the NVR/DVR

Step Seven

Tap start live view and you should see your cameras.

Step Eight

If you have any problems please feel free to call in for support.

GANZ DMS Lite User Manual

admin — Sun, 30 Jul 2023 11:28:14 +0000

GANZ DMS Lite User Manual, Client Software Included with PixelMaster Embedded NVRs, Digimaster H.264 DVRs and PixelPro Cameras Compatible with Windows 7, XP, and Vista

DMS Lite

DESCRIPTION

Provides remote live and playback views of PixelMaster NVRs Digimaster DVRs & PixelPro cameras
Compatible with Windows 7, XP, and Vista
Views and records up to 64 PixelPro cameras
Handles up to 16 DVR’s with a max of 64 channel view per page
The user-friendly and intuitive GUI has the ability to handle alarms and audio
Built-in device discovery tool
Screen layouts can be configured in either 4:3 or 16:9 formats
Multi-monitor support with an additional single channel float view

RESOURCES

DMS Lite Specifications

DMS Lite User Manual

DMS Lite Software Download

DMS Lite Training Videos

DMS Lite Release Note

DMS Lite Watermark Checker

Warranty

GANZ DMS Lite User Manual

Introduction

The SW must be installed locally on your computer.

Tabs

Live Playback Setup

The SW has three main areas.

The Live tab for viewing live video
The Playback tab for viewing recorded video
The Setup tab for configuring views.

Panes

Panes give you access to the majority of the SW. Exactly which panes you will see depends on your task, for example on whether you are viewing live video on the Live tab or recorded video on the Playback tab.

Panes can be minimized to icons. This helps save space, and enables a better overview of the panes you use. You minimize a pane by clicking the ‘▲’ in the pane’s title bar. When you need to use a pane which you have previously minimized, simply click the corresponding icon in the top left corner of the SW.

Pane icons from the live TAB.

View

The way in which video from your surveillance system’s cameras is displayed in the DMS Lite SW is called a view. A single view may contain video from up to 64 cameras. Your SW can handle an unlimited number of views, allowing you to switch between video from various collections of cameras. Each view’s layout can be customized to fit its contents.

Views can be private or shared with other users.

The SW also supports multiple windows and screens, allowing you to watch multiple views at a time on multi monitors

Application buttons

Let you select basic SW actions.

from the left to right the buttons are :

Virtual keyboard

Options : configure language, Local path for backup/image, position of panes

Log out

What can you Do with DMS Lite?

With the SW, you are able to:

View live videos from cameras on the surveillance system.
Play back recordings from cameras on the surveillance system with a selection of advanced navigation tools, including a highly intuitive timeline browser
Create and switch between an unlimited number of views, each able to display images from up to 64 cameras from multiple devices at a time Views can be placed in private groups (only accessible by the user who created them) or in groups shared with other users.
Create special views for widescreen monitors.
Use multiple screens as well as floating windows for displaying different views simultaneously.
Quickly substitute one or more of a view’s cameras with other cameras.
View images from several cameras, one after the other, in a single camera position ( a so- called carousel).
Control PTZ (Pan/Tilt/Zoom) cameras.
Use digital zoom on live as well as recorded images.
Manually activate triggered events.
Manually activate external outputs (e.g. sirens or light)
Use sound notifications for attracting attention to detected events.
Skip gaps during playback of recordings.
Print images.
Export recordings (e.g. for use as evidence) in AVI (movie clip), JPEG/BMP/PNG (still image). The AVI file can include audio.
Select between a numbers of language versions.
Get a physical overview of the entire systems under surveillance.

How Can User Rights Affect Your Use of DMS Lite

SW?

The rights of an individual user will determine the user’s ability to use the DMS Lite SW features.

Basically, the administrator is able to restrict a user’s rights to the following:

Access to each of the DMS Lite tabs: Live, Playback, and Setup
Ability to use features on the DMS Lite tabs
Ability to create views (views determine the way in which images from one or more

cameras are displayed)

Ability to view images from specific cameras

The ability to use various features of the DMS Lite SW may therefore vary considerably from user to user.

Minimum System Requirements

Operating System	Microsoft® Windows® XP Professional (32 bit or 64 bit), Windows Server 2003 (32 bit or 64 bit), Windows Server 2008 R1/R2 (32 bit or 64 bit), Windows Vista® Business (32 bit or 64 bit), Windows Vista Enterprise (32 bit or 64 bit), Windows Vista Ultimate (32 bit or 64 bit), Windows 7 Professional (32 bit or 64 bit), Windows 7 Enterprise (32 bit or 64 bit) or Windows 7 Ultimate (32 bit or 64 bit). Running as a 32 bit application.
CPU	Intel® Core2™ Duo, minimum 2.4 GHz or higher (more powerful CPU recommended for DMS Lite SW running high number of cameras and multiple views and displays).
RAM	Minimum 1 GB (higher RAM recommended for SW running high number of cameras and multiple views and displays).
Network	Ethernet, 100 Mbit or higher recommended.
Graphics Adapter	AGP or PCI-Express, minimum 1024×768 (1280×1024 recommended), 16 bit colors.
Hard Disk Space	Minimum 100 MB free.
Software	Microsoft .NET 3.5 Framework with Service Pack 1 or newer, DirectX 9.0 or newer.

Tip: To check which DirectX version is installed on a computer, click Start, select Run…, and type dxdiag. When you click OK, the DirectX Diagnostic Tool window will open; version information is displayed near the bottom of its System tab. If your computer requires a DirectX update, the latest versions of DirectX are available from http://www.microsoft.com/downloads/

Installing the DMS Lite SW

The SW must be installed on your computer before you are able to use it.

Typically, you copy the executive file from the CD that is carried with device, and then install the file on your computer.

Installation from CD

To install the DMS Lite SW from a CD, do the following:

Verify that your computer meets the DMS Lite SW system requirements.
Insert the surveillance system software CD, wait for a short while, then click the DMS Lite installation icon.

DM S_0,5.1.110630 01.exe

Tip: Depending on your security settings, you may receive one or more security warnings when clicking the link (Do you want to run or save this file? Do you want to run this software? or similar; exact wording depends on your browser version). When this is the case, accept the security warnings (by clicking the Run button or similar; exact button names depend on your browser version).

When the installation wizard starts, click ‘Next’ to continue the installation and follow the

steps in the installation wizard.

The wizard will suggest an installation path. Normally, you can simply go ahead and use

the suggested installation path

Click ‘Next’ buttons and waiting progress of installation.
Complete.

Logging In to the DMS Lite SW

To log in to the SW, do the following:

Double-click DMS Lite shortcut on your desktop. If no DMS Lite desktop shortcut is available, select the DMS Lite from Windows’ Start menu (exactly how you do this is determined by where and how you have installed the DMS Lite on your computer, but you would typically select Start > All Programs > DMS Lite > DMS Lite).
A splash screen is displayed while the DMS Lite loads; this typically takes a few seconds only.

The SW login window appears:

After a short wait, the DMS Lite window will open. The DMS Lite window has three tabs:

Live, Playback and Setup.

The Live tab is used for viewing live video, the Playback tab is used for browsing recorded video on PC or each device remotely, and the Setup tab is used for configuring the DMS Lite SW. Depending on your user rights, you may not be able to access all three tabs.

Selecting Language

In the DMS Lite SW, you are often able to select between different language versions.

Click the Options button in the right side of the DMS Lite top bar.

In the Options dialog, select Language, then the required language.
The DMS Lite SW must be restarted in order for the change to take effect: Close your

SW, then log in again to use the new language version.

Views Explained

The way in which video from one or more cameras are displayed in the DMS Lite SW is called a view.

A view may contain video from up to 64 cameras, depending on the surveillance system to which you connect. The DMS Lite SW can handle an unlimited number of views, allowing you to switch between video from various collections of cameras.

The illustration to the right provides an example of a DMS Lite displaying a view, in this case with video from 10 different cameras (view is highlighted in red frame).

In order to help you maintain an easy overview when you navigate between various views in your DMS Lite SW, all views are placed in folders called groups. A group can contain any number of views and, if required, subgroups.

Difference between Private and Shared Views

Views can be private or shared:

Private views can only be accessed by the user who created them.
Shared views allow many users to share the same views.

Setup of Views

You create and manage views on the DMS Lite Setup tab.

• Private and shared

Creating Private Views

Views are created on the DMS Lite Setup tab.

To create your first private view, you first create a group under the Setup tab’s Private top-level folder, then create the required view within the group.

Creating a Group

To create a group under the Private top-level folder, do the following on the Setup tab:

In the Setup tab’s Views pane, select the Private top-level folder.

Click the Create New Group button:

A new group is created. The new group is simply named New Group.

Overwrite the default name New Group with a group name of your choice.

You are now able to create a view within the group.

Creating a View within the Group

To create a view in a group, do the following:

In the Setup tab’s Views pane, make sure the group in which you want to create the view is selected.
Click the Create View button:

Select the required layout for your new view. You are able to select layouts for displaying up to 64 (8×8) cameras in a single view.
A new view is created under the group you selected. The new view carries the default name New View.

Overwrite the default name with a view name of your choice.

You are now able to add cameras to the view.

Tip: A group can contain an unlimited number of views. You may also create any number of subgroups if required.

Creating Shared Views

Views are created on the DMS Lite setup tab.

To create your first shared view, you first create a group under the required shared top-level folder, then create the required view within the group. If you have created shared views before, you may create the new view in an existing group, or you may create a new group for the view.

Creating a Group

To create a group under a shared top-level folder, do the following on the Setup tab:

In the Setup tab’s Views pane, select the Shared top-level folder (in this example, the

required folder is simply called Shared).

Click the Create Group button:

A new group is created. The new group is simply named New Group.

Overwrite the default name New Group with a group name of your choice.

You are now able to create a view within the group.

Creating a View within the Group

To create a view in a group, do the following:

In the Setup tab’s Views pane, make sure the group in which you want to create the view is selected.

Click the Create New View button:

1 Division (1×1) 16:9 ► |H 4 Division (2 x 2)
6 Division (1 + 5) ■ 8 Division (1 + 7) ITT 9 Division (3 x 3)

IB 10 Division (2 + 8) İÜ 13 Division (1 + 12) |şş 16 Division (4 x 4) E 25 Division (5 x 5) İEİ 36 Division (6 x 6)

E 49 Division (7 x 7)

R 64 Division (8 x 8)

Select the required layout for your new view. You are able to select layouts for

displaying up to 64 (8×8) cameras in a single view

A new view is created under the group you selected. The new view carries the default

name New View:

Overwrite the default name with a view name of your choice. You are now able to add cameras to the view.

Tip: A group can contain an unlimited number of views. You may also create any number of subgroups if required.

Renaming Views or Groups

To rename a view or group, do the following on the Setup tab:

Select the required view or group in the Views pane.
Click the Rename button:

Overwrite the existing group name with a new name of your choice.

Deleting Views or Groups

IMPORTANT: Deleting a group will delete all views and any subgroups within the group as well.

To delete a view or group, do the following on the Setup tab:

Select the required view or group in the Views pane.
Click the Delete button:

You will be asked to confirm that you want to delete the selected view or group.

How to Add Content to Views

Once you have created views, you are able to add content to the views. Content can be video from individual cameras or devices, carousels for viewing images from alternating cameras in a single view position.

Adding Individual Cameras

To add a camera to a view, do the following:

In the Setup tab’s Views pane, select the required view. When you select a view, the layout of the selected view is outlined in the main section of the DMS Lite window.

Layout of selected view is outlined in main section

(Indicated in red frame in this example)

In the Setup tab’s System Overview pane, click the plus sign(+) next to Cameras, then the

plus sign next to the required server to view a list of available cameras.

Select the required camera from the list, and drag the camera to the required position in the view. When you have dragged a camera to a position in the view, an image from the camera will—provided a connection can be established—appear in the selected position. If a connection cannot be established, for example if the surveillance system’s is not on recording mode, the name of the camera will be displayed in the selected position.
Repeat for each camera required in the view.

Tip: If you want to use all of the cameras under a server, you may simply drag the required server link to the view; this will automatically place all of the server’s cameras in the view from the selected position onwards. Make sure a sufficient number of positions are available in the view.

Tip: You can easily change which cameras are included in your view: clear an individual camera position by right clicking the remove button, then drag another camera to the cleared position, or simply overwrite a position by dragging a different camera to the position.

Adjusting View Properties

In the Setup tab’s view Properties pane, you are able to adjust osd and camera view.

Maintain Image Aspect Ratio

If the check box is selected, images will not be stretched to fit the size of the camera position. Rather, images will be displayed with the aspect ratio (height/width relationship) with which they have been recorded.

When viewing images with their original aspect ratio, you may see horizontal or vertical black bars appearing around the images from some cameras.

If the check box is cleared, images will be stretched to fit the position in the view; this may lead to slightly distorted images, but you will avoid any black bars appearing around the images.

Example: The same image viewed with Maintain Image,

Aspect Ratio selected (left) and cleared (right)

OSD settings (All views)

Show title bar: Displays a title bar located in the top of each camera position. The title bar helps users quickly identify camera name, Recording Status and live indicator.

Show indicator: Displays a blinking green indicator in the title bar when displayed on the Live tab. The indicator changes state every time a new image is received from the camera, an effect which makes it easy to see that video is live. Often, it is evident from the video itself that it is live, but the live indicator can be advantageous at times when not much is happening in the camera’s area of view.

Show icon: Displays a camera icon in the top of each camera.

Show name: Displays a camera name in the top of each camera.

Show resolution: Displays the current image resolution at the bottom of each camera.

Show date and time: Displays the current date and time at the bottom of each camera.

Adding Carousels

A carousel is used for displaying images from several cameras, one after the other, in a single view position. You are able to specify which cameras to include in the carousel as well as the interval between camera changes.

On the setup tab, drag the System Overview pane’s Carousel to the required position in the view. When you release the mouse button over the required position, the Carousel Setup window opens.
In the Carousel Setup window, specify which cameras to include in the carousel by selecting required cameras in the left part of the window, then clicking the Add button to add the selected cameras to the list in the right part of the window.

If required, move cameras up and down in the list to determine the sequence in which

cameras will appear in the carousel.

Define the amount of time for which each camera should be displayed in the carousel;

either with a common default, or individually for each camera.

Click OK to close the Carousel Setup window.

Carousel indicator will be positioned at right bottoms at the selected channel.

Adding Static Images

Static images can be used in views for a variety of purposes: for company logos, for including floor plans or maps in the view, for including photos of wanted persons, etc.

On the setup tab, drag the System Overview pane’s Image item to the required position

in the view.

Release the mouse button over the required position. When you release the mouse button, you are able to select the required static image file.

Further Configuration

The Options Dialog

The Options dialog lets you control the language selection, position of navigator, timeline for playback and the path for snapshot & Backup.

You access the Options dialog by clicking the Options button in the top right corner of the Smart

Client window.

Language Options

In the DMS Lite SW, you are often able to select between different language versions.

In the Application Options dialog, select the Language tab, then the required language.
The SW must be restarted in order for the change to take effect: Close your SW, then log in again to use the new language version.

Application Options

The Options dialog’s Application tab lets you customize the general behavior and look of your

SW.

Information: display the version of DMS Lite SW.

Application minimization: If you select Minimized button the SW will be positioned on window task bar as icon.

Application maximization: Select how the SW should react when you click the Maximize button in the top right corner. If you select Maximize to full screen, the SW will cover any Windows task bar on your screen when maximized.

Quit: stop to run the DMS Lite SW.

Viewing Live Video

You view live video on the DMS Lite Live tab. When you select the DMS Lite Live tab, the SW will connect to the surveillance system server, and display live images from the cameras in the selected view.

Tip: The SW supports use of multiple windows. This is especially useful if your computer has more than one physical display attached.

Live Video Is Not Necessarily Recorded

Even though you can see live video from a given camera, the video stream from the camera is not necessarily being recorded.

This is actually one of the benefits of an IP-based digital surveillance system: Unlike old-style analog surveillance systems, where everything was usually recorded on a tape regardless whether it was relevant or not, an IP-based digital surveillance system allows much more targeted recording.

Targeted recording frees security personnel, investigators, etc. from having to go through seemingly endless amounts of recordings in order to find a particular incident. Instead, the reduced amount of recordings.

Basically, live video streams from cameras pass through the surveillance system server. When required, the video stream is saved (recorded) on the server; when not required, the video stream is simply discarded. Video streams are typically saved on the server (recorded) either

• According to a schedule (example: every morning from 10.00 to 11.30)

– and/or –

• Whenever the surveillance system detects special events (examples: motion generated by a person entering a room; a sensor registering that a window is being opened; input from users).

The surveillance system server’s recording settings are determined by your surveillance system administrator. However, as a DMS Lite SW user, you can also start recording while viewing live video.

Tip: When viewing live video on the DMS Lite Live tab, you can quickly verify whether the video stream from a camera is being recorded: Look at the yellow bar immediately above the camera’s images. If the video stream from the camera is being recorded, the bar will display Rec. Note that you may occasionally see the Recording letters for short periods only. This is because cameras may have been configured to record only when there is motion, when a door is open, or similar, which can lead to many short periods of recordings.

Views and their Content

Selecting a view

You are basically able to select a view for display on the Live tab as below.

Selecting the required view in the Live tab’s Views pane:

You can (provided you have the necessary user rights) start recording while viewing live video. See page 61 for more information.

Camera Names and Colored Indicators

The display item can be selected on ‘View Properties’ of Setup Pane.

The bar displays the name of the camera as well as the name of the device to which the camera

is connected.

Each bar will display Live when live images are displayed, Rec if video from the camera in question is being recorded.

green ): Changes state every time a new image is received from the

Live indicator (flashing

camera

yellow): display when the device is under recording mode.

Recording indicator (solid

Carousel Positions

A carousel is used for displaying images from several cameras, one after the other, in a single view position.

If a position in one of your views contains a carousel, you will be able to recognize it by the following characteristics:

It displays images from different cameras, one after the other
It is marked as Carousel at position

You can enlarge a carousel by double-clicking the carousel position.

Enlarging Camera Positions

To enlarge images from a particular camera in a view, double-click the camera position. To return to normal view, simply double-click the blue image bar again.

Recording for IP camera

You can record the data from the IP camera which is connected to DMS Lite SW.

Create the storage folder for recording.

To create folder for recording Storage.

Go to recording item on configuration pane of setup tab.
Select ‘Storage’ item.

Click ‘Browse’ button.

Select a folder or create new folder by explore.

Set volume size of the folder.

*Maximum volume size will be determined by free space of physical HDD drive.

Click ‘Add’ button
A folder will be listed on Left top window.
Select the recording mode

Once: stop recording when the space is not enough for recording.

Overwrite: overwrite the data from oldest recording data when the space is full.

Select time sync mode.

Wait: wait for recording on HDD when the time is differ from PC and surveillance system. Delete: delete overlapped data when the time is different from PC and surveillance system during recording.

Click ‘Apply’ button to complete create storage folder.

Create Schedule profile

You can set recording parameter as Profile for recording.

Set Continuous recording profile.

To create profile for continuous recording

Click ‘Schedule’ item on Configuration pane.
Select Add Profile
Input profile name and select a color for profile. The color must be identified.
Click ‘Continuous’ item.
Select a camera from each device that is

needed to recording.

Click ‘OK’ button.
Right click or dragging of mouse at the area of time table that are needed to apply the

profile.

Click ‘Apply’ button to complete the recording setup.
Go to live view and check whether REC icon is displayed on view.

Set motion recording profile.

To create profile for motion recording

Click ‘Schedule’ item on Configuration pane. Select Add Profile Input profile name and select a color for profile. The color must be identified.

Click ‘motion’ item.

Select a camera from each device that is needed to recording.

Select areas by right click or dragging of mouse.

Select proper Sensitivity of motion.(10: lowest ~100: highest) Set Pre/Post recording duration.

9. Click ‘ OK’ button

12. Go to live view and check whether REC

icon is displayed on view.

profile.

Set Alarm in recording profile.

To create profile for Alarm in recording

Click ‘Schedule’ item on Configuration pane. Select Add Profile Input profile name and select a color for profile. The color must be identified.

Click ‘Alarm In’ item.

Select an Alarm device from device list.
Select a camera that need to be recording
Set Pre/Post recording duration
Click ‘Ok’ button.
Right click or dragging of mouse at the area of time table that are needed to apply the

icon is displayed on view.

Click ‘Apply’ button to complete the recording setup.
Go to live view and check whether REC

Set Recording quality for recording.

You can set alternation recording quality for each profile. If you don’t’ select this. DMS Lite SW will record the data same as network stream.

If you set recording quality of profile, the SW will re code the network stream as configured quality.

To set recording quality.

Click ‘Schedule’ item on Configuration pane

Recording Schedule

Profile

Sunday

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Select one of profile on list
Select ‘Edit Profile’
Click ‘Recording Quality’

item.

Select a camera from each

device that is needed to

recording.

Configure items(Codec, Resolution, Frame Rate…etc)
Click ‘Ok’ button.
Press ‘Apply’ button to apply configuration.

Set Audio recording.

You can record Audio data with image from IP camera.

To set Audio recording.

Click ‘Schedule’ item on

Configuration pane

Select one of profile on list
Select ‘Edit Profile’
Click ‘Audio’ item.
Select an Audio items from device list that need to be recording.
Click ‘ Ok’ button.
Press ‘Apply’ button to apply configuration.

Handling Sound Notifications

Your SW may have been configured to notify you with a sound notification when:

Events related to one or more specific cameras occur

Audio (Microphones)

The SW supports incoming audio: From the SW you can listen to live recordings from microphones attached to cameras.

You handle audio in the Live tab’s Audio pane.

Listening

To listen to live audio, select the required microphone from the Audio In list.

Audio when Camera is in Playback Mode

If the selected camera is in playback mode, you will hear any recorded audio from that camera’s default microphone and, if supported, speaker. The Live tab’s Audio pane will in that case have no function.

Digital Zoom

The right clicks of mouse lets you use digital zoom on images from any camera displayed in the view. Your use of digital zoom will not affect any recording of the images; any recording will still take place in the camera’s regular format. If you later wish to browse the recordings, you can use digital zoom with same action (mouse right click).

IS.Remove r;Flemove Ali

£Snapshüt iSPrint

ûDigital Zoom

p-Full Screen

HjMulti Monitor ► T Float View

Digital Zoom Features

When digital zoom is enabled, you will see a Zoom ratio in the top right corner of each of the view’s camera positions. Once you zoom in on an area of an image, you can move the other area by simply dragging of mouse.

Zoom with Mouse Wheel

you are able to zoom in and out using the scroll wheel on your mouse, provided your mouse is equipped with a scroll wheel.

Using PTZ

Change the zoom ratio up to 10x by mouse wheel scroll.

If your views contain PTZ (Pan/Tilt/Zoom) cameras, you can control the PTZ cameras with the Live tab’s PTZ Control pane.

PTZ Navigation Buttons

Use the navigation buttons in the PTZ Control pane to move the selected PTZ camera.

The Arrow buttons let you move the position of camera view.

The item of ‘ZOOM’, ‘FOCUS’ and ‘Iris’ let user can control the item manually.

POSITION STEP is a distance during Pan/ Tilt works.

PTZ Preset Positions

You can set the preset of PTZ camera from PTZ control panel.

If preset positions have been defined for the selected PTZ camera already, you are able to select such positions.

To set preset.

Move the PTZ view point by navigator arrow.
Select any number for preset numbering.
Press [SET] button to save the position.

To run preset.

Select one of preset number on the list.
Press [Goto] button, PTZ camera view will move to predefined position.

Manually Activating Output

If external outputs have been defined on your surveillance system, for example for switching on lights or sounding a siren, such output can be activated from the DMS Lite Live tab.

Select the required output in the Alarm Out pane. Then click the Active button

Or user can deactivate the alarm out from the active state of Alarm out by [Inactive] button.

Viewing Recorded Video

You view recorded video on the DMS Lite Playback tab.

When you select the Playback tab, the SW will display recording time table and Playback control panel.

You can follow below steps to start playback.

Select a device from the recording time table.
Select a time for starting at Play control panel or select a start point from recording

table.

*The time line can be expanded up to 5 minute term when left click of mouse on time label. Right click of the mouse will compress the time line.

4. Then press the Play icon button.

Views of playback

Selecting a View

You are able to change a view during playback as select a view icon.

Video Playback Features

Timeline Browser

The timeline browser displays an overview of periods with recordings from each devices displayed in your current view.

The number of timelines displayed in the timeline browser reflects the number of cameras of device. Cameras with an audio device attached are represented by a double timeline: a timeline displaying periods with video recordings and a timeline displaying periods with audio recordings. Up to 16 cameras can be displayed with audio timelines. If 16 cameras with associated audio are included in the view

To browse recordings using the timeline browser, click inside the timeline browser, and move your mouse right or left without releasing the mouse button or just click it

Orange : Recording period with continuous

Purple : Recording period with Alarm detection.

Blue : Recording period with motion

Green : Recording period with pre buffered recording period.

Gray : Recording period with Audio.

Tip: You can quickly change the timeline browser’s time span by pressing the left click of mouse.

. Position of the Timeline Browser

the default position of timeline for recording data is bottom of view.

But you can change the position as vertical view at option menu.

Time Navigation

The Playback tab’s Time Navigation pane provides you with controls for browsing and playing back recorded image from each device.

The area in the upper part of the Time Navigation pane shows the time and date of the recordings viewed.

Browse Buttons.

The Time Navigation pane’s brows buttons lets you manually navigate through recordings from the devices (DVR/ IP camera data on PC server).

From the left to right on browse buttons.

First image : move to the first image in the data base for selected device

Previous image: move to the image just before the one currently viewed.

Play Reverse: Playback recordings backwards in time.

Stop: stop / pause to playback the image.

Forward: playback recording forward in time.

Next image: move to the image just next the one currently viewed.

Last image: move to the last image in the data base for selected device.

Speed controller of playback

You can slide the indicator to control the speed of playback during play the image.

From 1/64X(slowest)~ 64X(fastest).

Digital Zoom

Just like on the live view, the right clicks of mouse lets you use digital zoom on images from any camera displayed during playback.

Your use of digital zoom will not affect any recording of the images; any recording will still take place in the camera’s regular format.

liRemove

17 ;Flemove Ali

iSnapshot iSPrint

fiDigital Zoom

p-Full Screen

HjMulti Monitor ► H Float View

What is the difference between optical and digital zoom?

With optical zoom, a camera’s lens elements physically move to provide the required angle of view. You cannot use optical zoom when viewing recorded video, simply because you cannot move the camera’s lens retroactively. With digital zoom, the required portion of an image is enlarged by cropping the image and then resizing it back to the pixel size of the original image—a process called interpolation. Digital zoom thus simulates optical zoom, but the digitally zoomed portion will have a lower quality than the original image. Digital zoom works equally well on live and recorded video.

Exporting Single Images

You are able to export single still images from selected cameras. Exported images can then be saved (as bitmap/Jpg/Png images) into PC, You can only export a single image from a single camera at a time.

To export:

Select the required view.
Right-click inside the required camera position; you now get access to the menu.
In the menu, select ‘snapshot’. You can now export the file as image.

Printing Evidence

In playback screen, you are able to print recorded images.

Select the required camera in the view.

Right-click inside the required camera position.

In the menu, select ‘Print’, you can print the image on local or network print

Exporting in AVI and Still

image

Select the DMS Lite Playback tab.

In the Playback tab’s Backup pane, specify when the period to be covered by the export should start. You do this by typing the required date in the first Start Time field and the time in the second field.

In the End Time fields, specify end date and time for the backup

Select the required camera from the camera list. You must select an individual camera from the list

Click the Backup button. This will open a separate Backup dialog; the dialog will list the specified start time, end time, and camera.

Only relevant if you are going to backup in AVI format: If the selected camera has a microphone attached—and the surveillance system supports audio—audio from speakers attached to the selected camera is included in the export as well. If you do not want to backup audio, select Video only option.

In the dialog’s backup setting pane, select the required backup format: AVI or still image.

Selected required Codec and quality for AVI format.

Select format of still image when you want to backup as still image.

Select OSD option for AVI and Still image, when you select this option the backup file includes this OSD text data also.

Specify export destination in the backup dialog’s Destination section.

Desktop: If you select Desktop, your backup file will be saved in an automatically Created Backup folder on the desktop of your PC.

Local Path: If you select local Path, you are able to specify a path yourself.

The backup file will be saved in the path you specify.

You can also select the path on network shared folder in company.

Media: If you select media, you are able to back up the file on DVD of PC.

The Erase button allow to rewrite on rewritable media

Click the Start backup button to begin the backup procedure. The status bar in the upper part of the backup dialog will display the status of the backup:

Frequently Asked Questions about Exporting

FAQ: Can I export audio too? When backup in the AVI. you are—when the surveillance system supports audio—able to include audio recorded by microphones in the backup.. When backup in the JPEG format, you cannot include audio.

Full Screen Viewing

To view your DMS Lite in full screen mode, click the Full Screen button near the middle of the

DMS lite top bar.

In full screen mode, the SW is displayed without the top bar, without any of the panes normally located in the left side of the DMS Lite, and without any Windows taskbar.

Full screen mode is available when using the Live and Playback tabs, but not when using the Setup tab.

To leave full screen mode and return to normal mode, press ESC or select restore screen after right click of mouse..

Using Multiple Windows

The DMS Lite supports use of multiple windows. This is especially useful if your computer has more than one physical display attached.

You can send live views to separate displays from the DMS Lite’s View pane in Live tab.

Sending a View to Secondary Display

Sending a view to a Secondary Display will show the view in a full-screen window on another physical display (if available).

The other physical display will only show the selected view, none of the Live or Playback tab’s other features, and it can only show one view at a time.

To send a view to a Secondary Display, do the following:

In the Live or Playback tab’s Views pane, right- click the required view. This will bring up a menu.

Or select the multi monitor icon on Top bar.

In the menu, select

Multi Monitor >

Display2. If more than one secondary display is available, they will be numbered.

Sending a channel to a Floating Window

Sending a channel to a Floating Window will show the camera in a small separate window on your main display.

The illustration to the right provides an example of a channel sent to a floating window. Note that the main DMS Lite window is immediately available behind the floating window.

The floating window will only show theselected camera. You can use any number of floating windows.

You are able to change the size of a floating window to suit your needs.

To send a channel to a Floating Window, do the following:

In the Views pane, right-click the required channel. This will bring Remove

Ex Remove AH up a menu.

löj Snapshot

Prînt

(+} Digital Zoom

In the menu, select Float View. ^FullScreen

“ğ Multi Monitor ►

Cg Float View

Closing Separate Windows

To close a separate view window,

When it is shown on the Primary Display, as a floating window simply click the Close button in the right corner of the windows.

Or on a secondary display, select the Close button after right click of mouse on separate window.

Logging Out

To log out of the DMS Lite SW, simply click the Log Out button in the

DMS Lite top bar.

Removing the DMS Lite SW from PC.

To remove the Smart Client, do the following:

In Windows’ start menu, select All SW, and select Uninstall in DMS LITE folder. This will open the uninstall Programs window.
In the uninstall Programs window, select uninstall button.

Amcrest Surveillance Pro Full Guide

admin — Sat, 29 Jul 2023 08:51:01 +0000

Amcrest Surveillance Pro Full Guide,Amcrest Surveillance Pro is an abbreviation for Professional Surveillance System. This software the most stable and recommended method of accessing your devices from your computer. It is free software provided by Amcrest that can provide a means of accessing all your devices in one central location without the use of a plugin or web browser.

Amcrest Surveillance Pro

Amcrest Surveillance Pro is an abbreviation for Professional Surveillance System. This software the most stable and recommended method of accessing your devices from your computer. It is free software provided by Amcrest that can provide a means of accessing all your devices in one central location without the use of a plugin or web browser.

Compatibility: Requires Windows 7 or later.

To download the latest version of Amcrest Surveillance Pro, click on the link provided below.

Amcrest Surveillance Pro Download for Windows PC

For more information on how to properly install this software, click here.

Please note, if you are experiencing issues with installing this software, such as an MSCVR.dll error, click here.

How To Install Amcrest Surveillance Pro on Windows

Amcrest Surveillance Pro is the most stable and recommended method of accessing your devices from your computer. It is free software provided by Amcrest that can provide a means of accessing all your devices in one central location without the use of a plugin or web browser. For more information on how to install Amcrest Surveillance Pro using Windows, please refer to the information provided below.

Note: This is a 64-bit version. If you are using Mac to install the Amcrest Surveillance Pro software, click here.

How To Install Using Windows

To install the Amcrest Surveillance Pro software on your computer, click here.

To begin installing the software, double click the provided .exe file. to begin the installation. Please note, if you have Windows Defender SmartScreen or certain versions of Norton running on your machine, please allow the software to be downloaded on your device. If Windows Defender is blocking the software, click on More Info then click on Run Anyway to begin installing.

Please note, this is a trusted software and will not harm or have any negative impact on your machine.

On the initial setup screen, select your language from the Select Language dropdown menu. Click on the I have read and agree checkbox and agree to the End-User License Agreement (“EULA”) agreement. To read the agreement, click on the agreement link provided. Once complete, click Next to continue.

Select the functions that you want to install with the software. You can choose to bundle the PC-NVR function with the software. PC-NVR turns your computer into an NVR and will utilize your hard drive (HDD) on your PC to store and access recorded video. To proceed with the installation, click Next.

Select an installation path for the software. To choose a folder, click on the Browse button and select the folder. Once a folder has been selected, click the Install button to begin installing the software on your computer.

Please note, if there is an older version of Amcrest Surveillance Pro detected on your machine, the new software will overwrite the old software. However, the device list information will still be reserved. Click Install to install the new software.

To generate a shortcut icon for the software on your desktop, click the Generate shortcuts checkbox.

Once the software has finished installing you will see a few options available. You will have the option to view the release note and run the Amcrest Surveillance Pro software. To begin running the software directly after pressing finish, select the Run Amcrest Surveillance Pro checkbox and click Finish to proceed.

Setting a Password

After the installation of the Amcrest Surveillance Pro software, you will need to set an administrator password. This password will be the admin password for the software. When a valid password has been entered, confirm the password in the Confirm Password field and click Next to continue.

This software provides password protection questions which can be answered in the event that you lose or forgot your password for the software. Select an applicable question from the Question dropdown menus and fill in the answer for those questions in the Answer field. Click Finish.

The software has now been properly installed on your machine. The password for the software will be saved by default on the login screen. If you would like to have your computer remember this password whenever you open the software, click Remember Password. If you would like the software to automatically log you in whenever your machine is reset, click Auto Login. Click Login to open the software.

How To Install Amcrest Surveillance Pro on Mac

Amcrest Surveillance Pro is the most stable and recommended method of accessing your devices from your computer. It is a free software provided by Amcrest that can provide a means of accessing all your devices in one central location without the use of a plugin or web browser. For more information on how to install Amcrest Surveillance Pro using Windows, please refer to the information provided below.

Note: If you are using Windows to install the Amcrest Surveillance Pro software, click here.

How To Install Using Mac

To begin installing the Amcrest Surveillance Pro software on your computer, click here.

The download will be a Google Drive link, however, please be assured this is a trusted software and will not harm or have any negative impact on your machine. Download and open the .pkg file.

Note: Your machine may recognize this as a coming from an unidentified developer and cannot be opened. Do not worry, it doesn’t mean that there is anything wrong with the software. You can easily override your settings and open the product by following these official steps recommended by Apple.

1) In the Finder, click on the Downloads tab and locate the Amcrest Surveillance Pro pkg.

2) Click on the Apple icon in the upper left corner and select System Preferences.

4) In the System Preferences menu, click on Security & Privacy.

5) In the General tab, click on Open Anyway to begin opening the Amcrest Surveillance Pro software.

6) Click on Open.

7) In the Installer prompt, click on Continue to be guided to the steps necessary to install this software.

8) Select a Destination for the software and click Continue.

9) Click Install (enter any security passwords needed for your machine and click Install Software).

10) The .pkg has now been installed on your machine. Click Close to exit. The Installer can be kept on your system or moved to the trash if you would like.

11) Click on Finder and open the Applications tab to locate the Amcrest Surveillance Pro software. Double click on the application to open the software.

Setting a Password

After the installation of the Amcrest Surveillance Pro software you will need to set an administrator password. This password will be the admin password for the software. When a valid password has been entered, confirm the password in the Confirm Password field and click Next to continue.

How to Customize Video Settings Using Amcrest Surveillance Pro

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Surveillance Pro to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Add your device to the Surveillance Pro software. For more information on how to add the device to the software, click here.

Step 2: On the main menu, click on the Device CFG option located in the configuration menu.

Step 3: Select your device from the Group menu and click on Camera.

Step 4: Use the video settings options provided in this menu to customize the video settings. Click Save.