So… let’s see. There are 3G hotspots that have ethernet ports on them. You can contact the company that provides you with your 3G modem, and tell you that you need a 3G modem with both WiFi and Ethernet. In fact… they have a sales department trained just for this. You tell them how you want to set up your home… and they will provide you with the proper equipment. Cool, right?

Otherwise… you’d have to use a computer as a middleman. The computer would need to have both wireless and ethernet…. like many laptops. You’d connect the laptop to the modem via Wireless, and you’d connect the DVR to the laptop via the ethernet, and then you’d enable Internet Connection Sharing in Windows, and designate the Wireless as the Source. Then, while you have the laptop on, your DVR would connect to the internet.

You could also purchase a WiFi extender, as most have ethernet ports. Then, you follow the instructions to set up the WiFi extender to the 3G modem, and you connect the DVR to the ethernet port on the WiFi extender.

You could do some research on what WiFi routers can also be used as range extenders when you replace the firmware with DD-WRT… the list isn’t all that long, but it means it is *possible* to take an old Wireless Router and turn it into a range extender. If you just happened to have one of those models, I guess that would save you from spending money.

But…. you definitely need some intermediate device between the internet connection and the DVR.

.

To connect a DVR for CCTV to your PC sharing network, you can follow these general steps:

Keep in mind that the specific steps may vary depending on the make and model of your DVR and the software it uses. It’s always a good idea to refer to the DVR’s user manual or contact the manufacturer for detailed instructions.

.

Connecting a DVR for CCTV to your PC sharing network involves several steps. Here’s a general guide:

Remember to consult the user manual of your DVR and the software for specific instructions, as steps may vary based on the brand and model. If you encounter difficulties, seeking assistance from a knowledgeable CCTV Camera Dealer in Chandigarh can provide guidance and support for network setup.

.

.

How do I connect a CCTV DVR with a laptop using an HDMI cable?

.

To connect a CCTV DVR with a laptop using an HDMI cable, follow these steps:

Overall, connecting a CCTV DVR to a laptop using an HDMI cable is a straightforward process, but it’s important to ensure that both devices have the necessary ports and settings to enable the connection. If you have any issues or questions, consult the user manual for your CCTV DVR or laptop, or seek assistance from a technical expert.

.

.

How do I connect my Hikvision DVR to a laptop and share my WiFi network to it?

.

I think you want to connect your DVR from Hikvision’s free DDNS hostinf service.

You can make your user ID on hikonline Resources and Information. After that you have to go to network settings menu and follow this video

.

How Can I watch CCTV footage with my PC? I’m using Hikvision 8 channel DVR and had connected it with internet.

.

Yes you can, Download and Install ivms-4200 software on your PC if it’s not at the same location as the cameras, or just type in the DVR ip address to your browser address bar if you are on the same network as the DVR.

.

.

How do I connect a CCTV DVR with a laptop using an HDMI cable?

.

A CCTV DVR is an analogue device so it uses baseband composite video. 9PAL or NTSC) at standard definition. You will need to find a video to HDMI converter if you really want to just view CCTV images on your laptop. You will still need to control the DVR locally via its remote control.

I abandoned DVRs some years ago.

A better approach is to replace the unit with a Network Video Recorder (NVR) that can be connected to your home network and can accept legacy SD video inputs from your cameras. Or you can go the whole way and upgrade your cameras to IP and connect them to your network directly via WiFi or Ethernet cabling.

Then you can access the NVR via Ethernet or via your WiFi to check recordings etc. It is also useful to add a “cloud key” that will allow secure access remotely from any external location via the Internet.

I have my CCTV surveillance integrated with my high speed home network using equipment provided by Ubiquiti. I can remotely access cameras at two properties using a Firefox or Chrome browser on my laptop and on my smartphone via the Ubiquity iOS video app.

.

.

Can I connect CCTV cameras directly to a TV?

.

CCTV cameras (usually) do not have HDMI but they may have coaxial out. See below:

The coaxial-out can be connected directly to the TV via the TV antenna input.

But this will work for one camera only.

You have options such as:

.

Is it possible to connect the CCTV DVR, and watch on your laptop?

.

There are lot of ways you can achieve this but let me talk on the simplest one.

By connecting the Ethernet port of your CCTV DVR to a switch and and hook up your PC to the same switch using RJ45 patch cable. Then go to the DVR network setup and set a static IP address if it is already enabled to use DHCP (dynamic Host Cofiguration Protocol). Set up something like this:

Save this and and restart your DVR for it to take effect.

Now head over to your PC Ethernet network configuration through control panel, go to your IPv4 and select “Use the following IP address”

Now enter something like this:

With this setting, the PC can successfully establish a link with the DVR through the gateway address.

Second Step:

Navigate to your internet explorer and type the DVR IP 192.168.001.010

you will be prompted to download an Active X, then follow the prompt and go to internet option on your internet explorer and enable the necessary Active X control, without doing this, you are not going to have your DVR web interface displayed properly.

watch this to learn how to enable Active X control

Once you are done with it, you should be able to see the number of channels, use exact user account on the DVR to login on your PC if prompted.

You will see Main Stream and Sub Stream, click on your desire channel and select Main Stream since you are not on the internet.

How do I connect DVR for CCTV on my PC sharing network?

.

How do I connect a CCTV camera to a laptop?

.

Connecting a CCTV (Closed-Circuit Television) camera to a laptop can be accomplished through several methods. Please note that the exact steps might slightly vary depending on the brand and model of your camera.

Here’s a general guide on how to connect a CCTV camera to a laptop:

Using a USB Adapter:

Using an External Video Capture Card:

Via Network (IP cameras):

In all cases, you’ll want to consult the user manual or contact the manufacturer’s customer support for the most accurate and specific instructions for your particular camera and laptop setup. Remember, it’s important to secure your camera feed to prevent unauthorized access.

.

.

How can I transfer CCTV footage from a DVR to a PC or mobile device?

.

To transfer CCTV footage from a DVR (Digital Video Recorder) to a PC or mobile device, you can follow these general steps:

1. Determine the DVR output: Check the available output options on your DVR. Most DVRs offer different types of outputs, such as HDMI, VGA, or BNC. Identify the appropriate output that matches the input options on your PC or mobile device.

2. Connect the DVR to the PC or mobile device:

– For PC: Use the corresponding cable (HDMI, VGA, etc.) to connect the DVR output to the PC input port. If the PC does not have the required input port, you may need to use an adapter or a video capture card.

– For mobile device: Some DVR systems provide apps that allow remote access and viewing of CCTV footage on mobile devices. Check if your DVR offers such an app and install it on your mobile device. Follow the instructions provided by the app to connect to your DVR remotely.

3. Software or app setup: If you are using a PC, you may need to install software provided by the DVR manufacturer to facilitate the transfer of footage. This software often allows you to access, view, and export footage from the DVR. Follow the installation instructions and set up the software as needed. If you are using a mobile device, make sure you have the DVR app installed and configured properly.

4. Access and export footage: Once the connection is established between the DVR and your PC or mobile device, use the software or app to access the CCTV footage. You should be able to view the recorded footage and select specific clips or timeframes for export. The export options may vary depending on the software or app, but commonly, you can save the footage as video files on your PC or mobile device.

It’s important to note that the specific steps and options may differ depending on the brand and model of your DVR system. Therefore, it’s recommended to consult the user manual or documentation provided by the DVR manufacturer for detailed instructions tailored to your device.

.

.

How do I connect my security cameras to my TV without a DVR?

.

Digital video recorders are a popular option for this connection. If you don’t want to hook up your security camera to a DVR, you can bypass the component and connect directly to a TV or monitor for viewing the signal from the camera.

You can now monitor any area under camera surveillance without recording

For home application, I recommend use cloud storage instead, easy install and operate.

.

.

What is the DVR used in CCTV?

.

In CCTV systems, a DVR stands for Digital Video Recorder. It’s a central component that acts like a storage device for the video footage captured by your security cameras. Here are some of its functionality:

Function: DVRs take the analog video signal from CCTV cameras, convert it into a digital format, and store it on a hard drive. This allows you to review past recordings for security purposes or to monitor activity remotely.

Appearance: DVRs are typically standalone devices that look like small computers. They have ports for connecting CCTV cameras, a monitor output for viewing footage, and a network connection for remote access (depending on the model).

Here are some additional points to consider about DVRs in CCTV systems

Compatibility: DVRs are designed to work with analog CCTV cameras. If you have IP cameras (digital cameras that transmit video over a network), you’ll need a Network Video Recorder (NVR) instead.

Storage Capacity: DVRs come with varying storage capacities. The amount of storage you need depends on the number of cameras you have, the recording resolution, and how long you want to keep footage.

Features: Modern DVRs offer various features such as motion detection recording, scheduled recording, and remote access through a mobile app.

.

.

How do I connect a CCTV DVR with the Internet using a 3G/4G data SIM?

.

If your DVR support 3G connection then you are good to go.

Unfortunately I won’t be able to provide you with pictures as DVR systems vary and I do not know your DVR brand.

First and foremost, I suggest you use Huwaei E303 dongle because it is one of the best dongle out there.

Make sure your sim card had already been provisioned for Data service by your ISP and don’t forget to obtain the APN details for your internet service.

Ensure cloud is enabled on your DVR by going through the setting icon.

Then head over to Network and look for the wireless service or 3G depending on the brand of your DVR.

Insert the 3G dongle to the back of your DVR and wait for the dongle to start blinking.

Select 3G and fill up the necessary information such as the APN details you got from the ISP.

After the settings, click save and restart, whenever the DVR is ready, you should see the dongle with a solid blue or green LED light showing that it is connected.

You should now be able to view your DVR online after the necessary remote view app installation and right configuration.

.

Introducing the Windows security camera software (Windows App) for Viewtron DVRs, NVRs, and network IP cameras. This software is sometimes referred to as NVMS (network video management software) or CMS camera software (central monitoring software). The software is called Viewtron VMS (video management system) and it allows users to view their security cameras live, playback recorded video surveillance footage, control cameras, configure DVRs / NVRs, and perform many other functions over an IP network.

The Windows VMS (Video Management Software) is able to connect to many DVRs, NVRs, and IP cameras at the same time. The software can display live video streams from analog CCTV cameras, HD security cameras (AHD, HD-TVI, HD-CVI), and network IP cameras. Users can access their security cameras on the local network where the DVR is located and also remotely over the Internet from anywhere in the world. Remote audio surveillance is also supported.

Viewtron also includes an iPhone app, Android app, and MAC DVR viewer software. All of the apps and software are included for free with all Viewtron IP cameras and DVRs, and there are no monthly monitoring fees. You can watch video demos here.

Viewtron Security Camera Mobile Apps & Software

Read More : How to setup The Guarding Vision.

Windows Software Live View Controls

The above screenshot shows a live security camera view of the Viewtron video surveillance software for Windows PCs. The various menus are noted in the orange, red, blue, and green rectangles.

.

Recorded Video Surveillance Playback

When the Storage Playback screen is accessed, the VMS software displays a calendar and timeline so that users can search through surveillance video recorded on their DVR’s hard drive. Time search can be done on the local network where the DVR is located and also remotely over the Internet. The main controls are below.

.

IP Camera Support

The Windows VMS software supports network IP cameras up to 4K resolution. The above image shows a home security camera system that uses a IP-D8 to monitor the front door. The camera is connected to a Viewtron hybrid DVR / NVR. The video management software can connect directly to IP cameras and also to NVRs / DVRs.

.

BNC Security Camera / CCTV Support

The Mac software also supports security cameras that are wired using coax cable and BNC connectors. This includes the analog CCTV cameras and the latest HD-over-Coax security cameras, including CVBS, AHD, HD-TVI, and HD-CVI video formats. The above image shows a 4K-B9 security camera that is connected to a Viewtron DVR.

.

Video Demos

Please watch these video demos to see the Viewtron CMS / NVMS software in action.

View Security Cameras at Multiple Locations

Watch this video to see the how the Viewtron NVMS (network video management software) can be used to centrally view security cameras from multiple locations. The Viewtron software for Mac and Windows PCs is able to connect remotely to multiple IP camera NVRs, hybrid BNC security camera DVRs, and even directly to Viewtron network IP cameras. Custom views can be configured that consists of cameras from different locations.

.

Remote PTZ Camera Control

The Mac software for Viewtron supports remote control of PTZ cameras (pan, tilt, zoom). Here is a snapshot of the Viewtron IP-PTZ-425 auto-tracking PTZ camera being remotely accessed and controlled. You can see the PTZ controls in the lower left.

.

Search, Playback AI Detection & Motion Detection Events

Watch this video to see the how search it is to search for AI object detection events and motion detection events using the Viewtron CMS camera software (NVMS). The video events are displayed in a list where you can playback the recorded video and also download and export an AVI file to your PC.

learn more about Viewtron Security Camera DVRs / NVRs

.

.

Learn more about the latest Viewtron HD Security Camera DVRs and NVRs.

.

Works with Analog CCTV, Network IP, and HD BNC Security Cameras

Users can mix and match different camera technologies. This is perfect for customers that have existing CCTV cameras and want to upgrade to high definition over time. Hybrid iDVR-PROs work with the following security camera types and resolutions. 4K security cameras

Viewtron Security Camera Mobile Apps & Software

Learn more about the remote viewing capability of the mobile apps and video management software that is included with all Viewtron CCTV DVRs, IP camera NVRs, and network IP cameras. All of these platforms support viewing multiple devices and locations. Live camera view, recorded video playback, and push notification alerts are also supported on the mobile apps. You can also watch this video see an overview of user interface of Viewtron recorders, learn how-to setup remote security camera viewing, and see a video demo of the remote web browser access.

.

View Your Security Camera System Remotely from iPhone, Android, Mac & Windows

Remote Camera View from iPhone App

This video demonstrates the iPhone app that is included for use with all Viewtron DVRs, NVRs, and IP cameras. The demo shows how the app is used to remotely access Mike’s home security camera system. Mike’s system consists of multiple 4K BNC security cameras, this Viewtron 4K IP camera, and a 16ch hybrid DVR / NVR. Live security camera viewing, ad well as recorded video surveillance search & playback is demonstrated in the video. You can learn more about the Viewtron security camera viewer app here.

.

View Security Cameras at Multiple Locations

The iPhone app for Viewtron supports the ability to view security cameras that are installed at multiple locations. The above video demonstrates remotely viewing two IP cameras at different locations. The app can also be setup to view multiple DVRs and NVRs at various locations.

.

Remote Security Camera View from Android App

The Viewtron security camera app for Android is identical to the iPhone app in look and functionality. Watch this video demo to see Mike access his home security camera system using the Android app. Live camera monitoring and recorded video surveillance search & playback is included in the demo. You can learn more about the Viewtron security camera app for Android here.

.

Mac Surveillance System Software

Watch this video to see the Mac security camera software connect to a Mike’s home security system DVR and an Viewtron IP camera installed at CCTV Camera Pros business location.

The Mac software that is included with all Viewtron products allows users to view their security cameras, create custom video layouts of multiple cameras at multiple locations, receive alarm alerts, and playback recorded video. Please take a look at our Mac security camera software for Viewtron overview page for more information.

.

Windows Surveillance System Software

The Windows software included with all Viewtron products allows users to view their security cameras, create custom video layouts of multiple cameras at multiple locations, receive alarm alerts, and playback recorded video. We will be creating a video demo soon. Please take a look at our Windows security camera software for Viewtron overview page for more information.

Remote Web Browser Access

Viewtron security camera DVRs & IP camera NVRs support remote access and management via web browser. Chrome, Firefox, Safari, Edge, and Internet Explorer browsers are supported.

DVR / NVR User Interface Intro

If you are considering a Viewtron hybrid security camera DVR or one of our NVRs for IP camera systems, this is a great first video to watch as you start your research. Mike demonstrates how easy it is to watch live video and playback recorded video surveillance footage directly on a Viewtron DVR using the USB mouse that is included.

.

Connect IP Cameras to BNC DVRs

Viewtron BNC DVRs also support network IP cameras. Watch this video to see how-to connect an IP camera to a DVR.

.

Free Consultations & Quotes

Did you know? CCTV Camera Pros can provide a complete surveillance system quote that includes any Viewtron DVR or NVR model? We can include security cameras, cables, connectors, power supplies, and monitors. We can even mix and match IP cameras and HD BNC security cameras because Viewtron DVRs are hybrid. This means that they work with just about any type of security camera.

.