DVRCMS.Com

LILIN Client Installation and User Guide

admin — Sun, 06 Aug 2023 18:56:54 +0000

LILIN Client Installation and User Guide, Navigator Client is a Windows based application for managing cameras of LILIN Navigator Enterprise servers, NVRs, and DVRs. Major features such as remote live monitoring, remote video playback, remote video backup, remove device status report, PTZ control, and user authentication are supported in Navigator Client.

Client Software (View Manager) – Quick Start Guide – Installation, Adding Devices, Playback & Backup,Attached below is a quick start guide showing the basic functionality of the LILIN View Manager software.This guide covers adding a device, configuring a view for a recently added device, as well as playback and backup.

LILIN Client Guide.pdf (4 MB)

Navigator Client PC Specifications

Attached below is a document showing the minimum specifications for a Navigator Client PC.

NAV Client CPU and RAID Requirement.pdf (100 KB)

How to setup LILIN P2P on an NVR for viewing on LILIN’s Client Software

Attached below is a document showing how to setup LILIN P2P on an NVR for viewing on LILIN’s Client software.

***Additional Note***

This process requires Navigator Enterprise software in order to function. For more information on Navigator enterprise contact your local LILIN representative.

How to setup LILIN P2P on an NVR for viewing on the Client software.pdf (600 KB)

No Time and Date displayed on the Client Software

When the client is launched, by default the client will display the connected channel number information in the top right hand side of each channel.

To change the information display in this area simply press the ‘F2’ key from your keyboard.

Pressing ‘F2’ will cycle through the following information:

Channel Number
Time
Resolution, Bit rate and Frame rate
Time and Date

Read Next :

How to setup The Guarding Vision

Uniview NVR Remote Access

P6SLite EasyVMS Installation Guide

Copy a LILIN Client configuration to a different PC

If you need to install and configure the LILIN Client on multiple machines, it is recommended to configure the first client machine and then copy the configuration to any other machines requiring the client.

To copy the Client configuration, browse to the folder of the installed LILIN Client. As default its location will be:

C:\Program Files\Merit LILIN\Navigator Client

In the Navigator Client folder you will see a folder called ‘users’. Copy this folder on to USB or a network shared drive, you will need to restore this folder on any future client machines.

Next, install the client on any further machines. Ensure the client software is closed and then browse to C:\Program Files\Merit LILIN\Navigator Client and replace the ‘users’ folder.

Run the client and the configuration should match the original Client configuration.

Which ports do i use when adding the Navigator software to client software (View Manager)

To add a Navigator server to the client software, please use the ports as shown below.

What is the Client Software default username and password

The default username and password for the LILIN View Manager software are:

Username: admin
Password:

This guide assumes that the LILIN Client software has already been installed on your computer and the icon is present on the desktop.

1) Click on the Client Software icon on the desktop and a login box will appear.

The details to enter the software are:

Username: admin

Password: (Leave Blank- there is no password)

Click ‘OK’ to enter the software.

2) The software will load to its main screen.

To add a device to the client, right click on ‘Private Collections’ in the left menu and a mini menu will appear, select ‘Add Group’.

A new window will appear, asking you to name the group. You can name this whatever you want.

This new group will now appear under the ‘Private Collections’ menu.

To add a device to this group, right click on the group name and select ‘Add Channel’.

A new window will appear. Here you will enter the details of the device you wish to add to the Client software. This can be an NVR, NAV server or a standalone camera.

In this new window please input the device details, select the correct device type, and add the correct username and password for this device.

Click ‘Connect’ on the left-hand side to check the connection. If all of the device details have been entered correctly, the client will now connect to the device and show a preview of the first camera just above the connect button.

554

admin

DVR/NVR-H264

v Detect

Add Channel

Please input the correct user name and passvvord then press “Connect” to check connection

( OK )(CANCEL

Connect

Name

Device Type

IP/DNS

HTTP Port (ex. 80)

HTTPS Port

Onvif Port (Optional)

Camera Video Port

Channel Location

Username

Passvvord

Main Stream

Substream

M Multide Channels Imoort

To import multiple cameras from a device (NVR, DHD, NAV) make sure the ‘Multi-Channel Import’ box is ticket at the bottom of the screen. This will open a new window asking you to select which channels you want to include on the import.

It is recommended that you tick the ‘Select All’ box.

Add Channel

Substream

Connect

a Multiole Channels ImDort

CANCEL

Please input the correct user name and password then press “Connect” to check connection

Select Channel

Channel Name

#002CAM02

#003 CAM03

#004CAM04

#OO5CAMO5

#006 CAM06

#007CAM07

#008 CAM08

#009 CAM09

»010 CAM 10

Cancel

Select Ali / Select None #001CAM01

When you are happy with your selection, click ‘OK’ and your new devices should appear in your group under the ‘Private Collections’ menu that you created in step 4.

If you do not see devices appear, try clicking on a different option on the left side menu, which will refresh the tab.

The next stage is populating the view so that the cameras are visible. To do this, either tick individual devices, or to select all of the cameras tick the group name.

Next, left click and drag the highlighted group (or camera) to the view window you would like the Client to start to add the device channels from. If you want to start from Channel 1, drag to the first box, if you would like to start from Channel 4, start from the fourth box etc.

12) Your camera views should now appear in the windows.

LILIN Client

Creating and Editing Views

Create a New View:

To create a new view, in the upper left-hand side menu right click on ‘Local Host Viewer Collections’ and select ‘Add View’ from the mini menu that appears.

A new window will appear. Enter a name for this view and select your chosen channel layout from the options that appear in the dropdown menu. These range from 1×1 (1 camera -full screen) to 12 x 12 (144 cameras).

Add View

Ali Cameras

6×6

ch 01	x 1 x2 x3 x 4 x5			ch 04	ch 05	ch 06
ch 07	x7 x8 x9 0x 1C 1×1			ch 10	ch 11	ch 12
. 12x E ch 13		¹ **	^{I J}	ch 16	ch 17	ch 18
ch 19		ch 20	ch 21	ch 22	ch 23	ch 24
ch 25		ch 26	ch 27	ch 28	ch 29	ch 30
ch 31		ch 32	ch 33	ch 34	ch 35	ch 36

( OK ) (CANCEL)

Click on ‘OK’ when you are happy with how the layout appears. This will create a new view, which will be added to the Local Host Viewer Collections.

Add View

View Name
Windows

ch 01	ch 02	ch 03	ch 04	ch 05	ch 06	ch 07	ch 08	ch 09	ch 10	ch 11	ch 12
ch 13	ch 14	ch 15	ch 16	ch 17	ch 18	ch 19	ch 20	ch 21	ch 22	ch 23	ch 24
ch 25	ch 26	ch 27	ch 28	ch 29	ch 30	ch 31	ch 32	ch 33	ch 34	ch 35	ch 36
ch 37	ch 38	ch 39	ch 40	ch 41	ch 42	ch 43	ch 44	ch 45	ch 46	ch 47	ch 48
ch 49	ch 50	ch 51	ch 52	ch 53	ch 54	ch 55	ch 56	ch 57	ch 58	ch 59	ch 60
ch 61	ch 62	ch 63	ch 64	ch 65	ch 66	ch 67	ch 68	ch 69	ch 70	ch 71	ch 72
ch 73	ch 74	ch 75	ch 76	ch 77	ch 78	ch 79	ch 80	ch 81	ch 82	ch 83	ch 84
ch 85	ch 86	ch 87	ch 88	ch 89	ch 90	ch 91	ch 92	ch 93	ch 94	ch 95	ch 96
ch 97	ch 98	ch 99	ch 100	ch 101	ch 102	ch 103	ch 104	ch 105	ch 106	ch 107	ch 108
ch 109	ch 110	ch 111	ch 112	ch 113	ch 114	ch 115	ch 116	ch 117	ch 118	ch 119	ch 120
ch 121	ch 122	ch 123	ch 124	ch 125	ch 126	ch 127	ch 128	ch 129	ch 130	ch 131	ch 132
ch 133	ch 134	ch 135	ch 136	ch 137	ch 138	ch 139	ch 140	ch 141	ch 142	ch 143	ch 144

( OK ) (CANCEL)

To populate cameras to your new view, find the device (NVR, DHD, NAV) or individual cameras under your ‘Private Collections’ menu. Tick the boxes next to the devices you want to populate.

Left click and drag the highlighted/ticked devices and to your new view window. If you want to start from Channel 1, drag to the first box, if you would like to start from Channel 4, start from the fourth box etc.

6) Your camera views should now appear in the windows.

Editing a View:

To edit an existing view, right click on the view and select ‘Modify’ from the mini menu that appears.

View #ı¹

J Delete

Channel Highlight _ J Device Information

CAM01

■ /y Vievver Manager

H Local Hoşt Vievver Collections

■ Lpjj İP Scan Collectio ı| Navigator Station

■ Private Collection:

■ /P URL Collections

A new window will appear. Select the number of channels you would like the view to display from the dropdown list.

3) You can also rename the view if required.

4) Click ‘OK’ and this will save your changes. Your view should have changed; if it has not, try clicking on a different view and then back in to your edited view, to trigger a reload.

LILIN Client

Playback & Backup

1) To access playback through Client, simply click the icon below, which can be found on the top menu bar. This will load the multi-channel playback feature.

2) The Playback window will now be displayed.

On the right-hand side of the screen is a calendar and time search function.

Dates coloured in red on the calendar have recorded footage.

Click on the required date on the calendar and all available data for that date will populate the section below in 1-minute sections. You can refine these results by filtering for a specific time range.

You can see in the image to the right we have refined our search to a 5 minute period.

To play a video file, simply click on the minute you want to view and the video from all cameras at that time will play automatically. If you want to view one camera in full screen, simply double click on that channel.

To backup video, ensure that you have filtered your search down to the correct date and times required, then click the ‘backup’ icon from the menu at the bottom of the screen.

The backup menu will now open. This menu should load with your filtered date and times from the last step, but if these are incorrect you can adjust them here in the middle menu.

Select the cameras you want to include in your backup and click ‘Start Convert’ as shown above. This will create a .AVI file of the selected data.

Zosi Smart App AVSS Guide

admin — Wed, 26 Jul 2023 07:28:16 +0000

Zosi Smart App AVSS Guide,The zosi app allows you to remotely manage your camera anytime, anywhere. And check your property and personal safety, you can also turn on notifications to get every alarm push from the camera.

AVSS brings the Zosi Smart App to your desktop offering similar functionality and accessibility. This article will teach you how to log in to AVSS, as well as teach you how to view your cameras.

1. Once you have installed AVSS (download AVSS PC Client / AVSS Mac Client ) to the directory of your choice, open the application by double clicking on the icon on your desktop.

2. When AVSS opens, enter your Zosi account name and password. These will be the same credentials you use to access the Zosi Smart App for iOS and Android.

If you don’t have a Zosi Account, select the register option and complete the fields.

Win Client_AVSS V 1.7.5

This Windows client works for the following Zosi DVR / NVR / IP Camera models whose Device ID

is a 20-digit string of numbers and letters, which ends with “111A“.

4-Channel DVRs/NVRs：

ZR04CJ; ZR04CM; ZR04CN; ZR04CN; ZR04CS; ZR04DR; ZR04DS; ZR04EM; ZR04EN; ZR04JM; ZR04JB; ZR04JS; ZR04JT; ZR04MM; ZR04MN; ZR04PB; ZR04TN; ZR04TS; ZR04UN; ZR04VM; ZR04VN; ZR04WM; ZR04ZN; ZR04JS00; ZR04MS00; ZR04MS10; ZR04US00;

8-Channel DVRs/NVRs：

ZR08AR; ZR08AU; ZR08BL; ZR08BM; ZR08BN; ZR08BU; ZR08CJ; ZR08CM; ZR08CN; ZR08CS; ZR08DN; ZR08DM; ZR08DP; ZR08DQ; ZR08DS; ZR08EM; ZR08EN; ZR08GS; ZR08GP; ZR08HS; ZR08JM; ZR08JN; ZR08JP; ZR08JR; ZR08KS; ZR08LL; ZR08MM; ZR08MN; ZR08PM; ZR08PR; ZR08PU; ZR08QB; ZR08RP; ZR08TN; ZR08VN; ZR08VU; ZR08WM; ZR08WN; ZR08KS00; ZR08KS10; ZR08MN00; ZR08MS00; ZR08MS10

16-Channel DVRs/NVRs：

ZR16BK; ZR16CK; ZR16DB; ZR16DK; ZR16TB; ZR16WK;

Wireless IP Cameras:

ZG1992F; ZG2622M;

ZNC1883Y; ZNC1902Y; ZNC1903Y; ZNC1905S; ZNC1992Y; ZNC2873Y; ZNC2892Y; ZNC2893Y; ZNC3082Y; ZNC3083Y; ZNC5122M; ZNC5133Y; ZNC5134Y; ZNC6112M; ZNC6113Y; ZNC6122M

ZND5122M; ZND5133Y; ZND5134Y

(You can find the model number and ID on the label of the DVR/NVR.)

Version Updates:

1. Added the image zoom function, which can be achieved by sliding the mouse;

2. Fixed the problem of particularly slow response when using the playback function and optimized the viewing experience.

↓↓You can download the AVSS client from the below link↓↓:

https://ansjerfilemanager.s3.amazonaws.com/AVSS.1.7.5.3.exe

Zosi Smart App AVSS Guide Mac Client_AVSS

This Mac client works for the following Zosi DVR / NVR / IP Camera models whose ID has 20 characters:

4-Channel DVRs/NVRs：

ZR04ZN; ZR04ZM; ZR04FN; ZR04FM; ZR04DS; ZR04JS; ZR04JM; ZR04JS; ZR04CS; ZR04CN; ZR04CM; ZR04TS; ZR04TN; ZR04SN; ZR04EN; ZR04EM; ZR04DP; ZR04UN

8-Channel DVRs/NVRs：8-Channel DVRs/NVRs：

ZR08ZN; ZR08ZM; ZR08FN; ZR08FM; ZR08DS; ZR08KS; ZR08DP; ZR08CS; ZR08CN; ZR08CM; ZR08SN; ZR08EN; ZR08EM; ZR08TN; ZR08JM; ZR08UN; ZR08BN; ZR08BM

8-Channel DVRs/NVRs：

ZR16ZK; ZR16JK;

Wireless IP Cameras:

ZG2622MW; ZND5122M; ZNC6122M

(You can find the model number and ID on the label of the DVR/NVR.)

You can download the AVSS client from the below link:

https://ansjerfilemanager.s3.amazonaws.com/AVSS1.7.3.496.fs.dmg

P6SLite EasyVMS Installation Guide

admin — Wed, 19 Jul 2023 07:13:08 +0000

P6SLite EasyVMS Installation Guide, Support cloud device addition and management,Provide streaming media storage and playback functions, monitor the playback connection status, and provide relevant status notifications,The system is more streamlined, more convenient to operate, green and ad-free

P6SLite For Pc software name is EasyVMS, you can download the software here, support Windows PC.

P6SLite For Pc Function

Support cloud device addition and management
Support APP account login and registration
The system is more streamlined, more convenient to operate, green and ad-free
Realize centralized user management, fault management, system maintenance and TOPO navigation
Provide streaming media to distribution function
Provide streaming media storage and playback functions, monitor the playback connection status, and provide relevant status notifications
Maximum performance of the software
Maximum number of device logins: 64pcs real-time preview channels: 36 channels
Maximum number of access channels 256 channels Number of remote playback channels 1 channel
Maximum number of search devices: 256pcs Remote recording query channels: 1 channel
Maximum number of local users 16 Number of local playback channels 1 channel
Maximum number of cloud accounts 1 Number of local recording query channels 1 channel

System operating environment

Operating system: Microsoft Windows 7, 8.1, 10 compatible with some XP systems

CPU: Intel AMD 32-bit or 64-bit

Memory: 2G or higher

Note: Due to the different operating systems and hardware of the PC platform, the smoothness and functionality of the software are affected to varying degrees

P6SLite EasyVMS Installation Guide

Install and login to P6SLite For Pc

Find the file in the software directory, double-click the EasyVMS installation file to install the client software, and the login dialog box will pop up, as shown below. The current page will be adapted according to the full Chinese and English systems.

Then click Run EasyVMS software and choose the language that suits you to log in to the system;

Local login user name default: admin, password default: empty; After logging in, select the software in the upper right corner to log out of the software;

Cloud account login, please enter APP P6SLite account, currently supports scanning code login and manual account input (manual input requires attention to the choice of server)

Interface Introduction

The main navigation buttons at the top of the interface are real-time preview, remote playback, electronic album, device management, system log, alarm information, plan recording, system settings, click the navigation button to enter the corresponding configuration interface. On the left side of the interface is the device navigation, on the right is the display area, and in the upper right corner are the help, logout, minimize, maximize, and close buttons. Start with device management and add devices.

Device Management

Click the Device Management button to enter the Device Management page, as shown in the following figure; On the device management page, you can perform manual adding, modifying, batch deleting, batch upgrading, APP cloud account management, region adding, as well as batch adding, batch modifying IP, and successfully added devices, right-click remote settings, time synchronization, clear alarms, display QR codes and other functions.

Zone configuration

For easy zone device management (the default zone is preferred when added by camera), you can right-click the default zone to customize the new zone, or click Add Zone below.

ADD P6SLite Camera

Click the refresh button in the lower right corner to search for the P6SLite camera

Select the IP address of the camera, then click “Batch Change IP” to modify the IP address of the camera.

If you don’t know how to modify the IP address, please check the “Refer to the computer network card to set the IP” software will automatically modify the IP address according to your network environment, of course, you can also manually modify the IP address.

The default user name of the device: admin, password: empty, click Confirm, save the modified IP address, and then click the refresh button again, search for the new IP address again, and then select the IP address and click Add in bulk.

Then click the real-time preview button to enter the preview interface

Double-click the IP address of the camera on the right, and the video will be automatically displayed in the surveillance screen on the right.

If you add multiple devices, you can select the Default Region context menu and select Turn on automatically, Open by region, Close preview by region.

Delete Camera

Select one or more devices to be deleted in the device list, click the Delete button, the system will prompt whether to confirm the deletion of the device, click the [OK] button, the device on the default zone list will be deleted.

Upgrade Camera

Local upgrade: Select the device you want to upgrade in the list of added devices, and then select Bulk upgrade. Be sure to restore the factory settings after the upgrade is successful.

Cloud Upgrade: Select the device to be upgraded in the list of added devices, and then select Cloud Upgrade (whether the device supports cloud upgrade), otherwise the Cloud Upgrade page will not be prompted

Remote playback

Video retrieval

Enter the remote playback interface, select the channel that needs to be played back on the left device tree (Note: currently only supports one playback all the way), select the date on the calendar, click the “Search” button, the system starts to search for the recording in the hard disk recorder (or local hard disk), and display the search results in the search results panel. As shown in the following figure:

Playback control

Control Buttons

Play button, tap when the recording stops to resume playback.
Pause the playback button, tap the playback pause while the recording is playing, and tap again to resume playback.
Stop playing button, tap while playing to stop the screen.
Audio control button, tap to turn on/off audio playback during playback.
Choose hasten Slow down Fast/slow rate control is possible.
Click Playback capture button, you can take a screenshot of the playback screen.

Timeline operations

(1) The scale on the timeline is 0-24 points.

(2) Mouse over the timeline to scroll to zoom in and out of the timeline.

(3) Double-click the timeline to play it directly.

Device control

The device management interface can also control the device, including: time synchronization, camera restart, clear alarm, etc.

Time synchronization

In the Device Management > the Added Device interface, select the device and click the [Time Sync] button to synchronize the device time with the PC time.

System settings

Click System Settings to enter the local settings of the software.

You can set the EasyVMS software to automatically open at startup, check the button , and save. After saving, EasyVMS will automatically run after the next boot.
You can set the automatic calibration interval time of the device, check the button , and enter the interval time (such as: 120). After saving, each device will automatically calibrate every 120 minutes. It is recommended to calibrate every 30 minutes
You can set the local recording duration, select the recording duration input box, and enter the recording duration (for example: 30). Once saved, each recording is saved with an interval of 30 minutes. You can also set the recording format and select the recording format (e.g. PRV/AVI). After saving, the local recording format is . PRV. A dedicated PRV player can be downloaded on the official website
You can set the log retention period and directly select the recording duration (e.g. six months). Once saved, logs are retained for six months.
You can set the capture and video saving path, click to select the path, such as (G: EasyVMSImage/ G: EasyVMSVideo). After saving, the capture path is set to G: EasyVMSImage, the recording path is set to G: EasyVMSVideo.

Account management: Enter the system settings interface to manage local account login, including creating operator users, creating guest users, modifying user passwords, and deleting devices.

Click the “System Settings” button, click the “Account Management” button, click [Create], enter the new user name, password and user group (such as operator) to save, the user group will have one more new user “user1”.

Click the [Account Management] button, select the operator user user1, and click [Delete]. After deletion, the new user disappears.

Currently, there are three levels of user permissions:

Administrator: Administrator privileges, which can perform device management, user management, video monitoring, video playback, log query, switch users, and log out of the client.
Operator: Video monitoring, video playback, log viewing, user switching, password modification.
Guest: Video monitoring, switching users, password modification.

Real-time preview

Double-click the device name in the left device to open a preview of all channels of the device on the right preview interface, as shown below:

To turn off single-way preview, you can right-click “Close Preview” on the list that pops up the video channel to turn off the channel preview.

Right-click the default region in the device bar on the left and select “Turn off preview by region”

Preview controls

On the Preview Actions tab, the following figure is shown.

The icon is to turn off the full channel preview button, clicking it will close all preview screens.
The icon is the capture button, click to capture the current channel image to the local computer.
The icon is the on/off full-channel recording button, clicking it will enable/disable full-channel recording.
The icon is the on/off audio button, clicking it will turn channel audio on/off.
The icon is the screen split button, click to set the number of screen split paths, currently supports single screen, four screen, nine screen, sixteen screen, twenty-five screen, thirty-six screen road preview.
The icon is a preview of the next video screen, which can be used in single screen, four screen, nine screen, sixteen screen, twenty-five screen, thirty-six screen, etc.
The icon is a full-screen toggle button, click to switch to full-screen preview. In full screen, you can right-click “exit full screen” or press the keyboard ESC key to exit.
The icon is a group tour, and you can group the picture in the case of many cameras or NVR images. Then make a grouped preview

Right-click menu control

Select the real-time preview channel on the preview interface and right-click to bring up the right-click control menu, as shown below:

Click the [Close Preview] button, and the preview of the current channel screen will be closed.
Click the [Turn on sound] button to open the audio preview for the current channel.
Click the [Capture] button, the capture of the current channel is turned on, and the image is saved locally.
Click the [Start Recording] button to enable single-channel recording on the current channel, and save the recording to the local computer.
Click the [Screen Scale] button to set the current preview screen scale to the original scale or fill scale.
Click the [Full screen] button to switch the preview screen to full screen. Consistent with the Full Screen feature in the toolbar below the preview action page.
Click the [Clarity] button to set the channel quality as the main stream/substream (valid only for P2P (added by ID number) settings).
Click the [Voice Intercom] button to shout to the front-end camera.
Click the [Electronic Magnification] button to perform electronic amplification operation on the channel.
Click the [Remote Configuration] button to set the camera parameters

Set up P6SLite camera

OSD settings

you can add the name of the current camera and the placement of the moving time; Click the red font to move

Image settings

Night vision mode; Set the night market mode on a dual-light device to achieve a full-color image at night.

IR-CUT sensitivity (the higher the modified value, the higher the sensitivity): The earlier the black and white image is switched at night.

IR-CUT switching time (the larger the modification value, the longer the switching time): Extend the time to switch black and white images.

The image is flipped, and the image can be selected to be corrected by software when the camera is hoisted.

Network configuration

Network Setting

modify the IP address required by the camera in the network

WiFi settings

Select SSID (wifi name), click search, enter wifi password.

After filling in the wifi name and password, select Check wireless settings, it will pop up to check the validity of wifi configuration (display failure, please check wifi password or refresh the page) If the wifi configuration is successful, then unplug the wire, the real-time preview screen will be black or stuck after about 30 seconds to return to normal (the camera is switching network card)

Normal wifi and wifi hotspot mode switching: a When the camera is powered on, the camera will automatically switch to wifi hotspot direct connection without plugging in the network cable;

When the camera is powered on first in the network cable or plugged in the network cable first, the camera will switch to normal wifi mode. C Manually force switch between normal wifi and wifi hotspot camera will restart

Port setting

HTTP/signaling/data port modification in the corresponding access software, need to manually add to modify the port number, otherwise it can not be effectively accessed (non-professionals do not recommend modification, so as not to add device failure)

Mail settings

enable and configuration methods

FTP settings

Encoding settings

encoding parameters

Modify the format and appropriate parameters of the video picture to achieve the best effect.

audio settings

input volume refers to the size of the camera microphone recording, the larger the value, the louder the playback sound of the monitoring device; The output volume refers to the sound played by the camera horn, the higher the number, the louder the sound played by the camera.

Alarm settings

Motion detection

Refers to the way to enable or disable motion detection, and the way to trigger the motion detection alarm is to trigger the email (capture a picture when the alarm is sent to the specified mailbox by email, and the mailbox must be set up first);

Trigger FTP (capture a picture when alarming, and send the picture to the FTP terminal through the set FTP server); Linkage push (refers to whether to receive camera alarm reminders, the subscription function on the home page needs to enable linkage push);

Trigger capture (a picture will be captured when a moving signal is detected, and the captured picture can be viewed in the message function on the home page); trigger recording (recording in different colors after detecting a moving signal);

Select the area (refers to the selected area on the screen with a movement signal will alarm, the selected area is subject to the green box)

Client logs

Enter the system log interface, select the client log, select the user, start time, end time and other conditions to filter, click the [Query] button, you can query all the operation log information according to the conditions, each log information includes the operation user name, machine IP, time, description and other information.

Click the Export button to save the operation information as a .csv format file, as shown in the following figure. ：

Electronic photo album

The electronic album is mainly used for the management of local channel capture and post-recording files, and users can search for viewing and deleting a series of operations according to different filter types.

Search by device, select any device, and search for local pictures and videos under that device.
Search by date, select a date (e.g. June 5) to search for local images and videos under that date.
Search by media type, select the image/video type (e.g. Video) to search all local video files.
In addition, you can delete and jump the playback operation of the picture/video, and directly select the file and right-click to execute.

Alarm information

The alarm information interface records all types of alarm information of the software, including motion detection, video loss, alarm input, heartbeat loss, etc., and users can view, export and backup operations on various alarm information.

View alarm information

Select the alarm information type (for example, only check Video Loss and Alarm Input) to view all categories of alarm information: click the [Export] button, select the save path, and export the alarm information to the local computer.