DVRCMS.Com

Herospeed Firmware Software Download

admin — Sun, 07 Apr 2024 09:10:49 +0000

Herospeed Firmware Software Download, Herospeed Technology is a high-tech company specialized in software development, software customization and software implementation. It owns a group of long-term professionals who are engaged in software development and software customization. With strong technical development strength, Herospeed Technology fully meets customer needs.

Herospeed Firmware Software Download

NVR

The Network Video Recoder support network video access,and it has adopted a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),embedded system technology,storage technology, network technology and intelligent technologies.It can work independently as NVR,or as a powerful security networking system.

Channels	Version Info	Time	Download Url
4CH	NVR_HI3798_4CH	2019-10-15 16:38:28	.
9CH	N3009_32NR_ALH1P4_V2.0.4.230818_R2	2023-09-04 10:58:41
	N3009_32NR_ALH1P0A0_V2.0.4.230818_R1	2023-09-04 10:56:26
	N3009_32NR_BVH1P0A0_V2.0.4.230803_R2	2023-08-16 16:59:54
	N3009_32NR_BVH1P4_V2.0.4.230727_R2	2023-08-16 16:57:41
	NVR_SS621Q_9CH_4POE_PNP_BD_V5_update_V22.1.26.4	2022-10-17 19:43:14
	NVR_SS621Q_9CH_BD_V5_update_V22.1.27.5	2022-10-17 19:41:44
	HI3536E_H265_9CH_BD_V5_update_V21.1.26.5.zip	2021-07-30 15:00:45
	NVR_HI3536D_H265_9CH_8POE_PNP_BD_V5_V21.1.22.6	2021-06-19 15:02:53
	NVR_HI3536D_H265_9CH_BD_V5_V21.1.23.3	2021-06-19 14:59:40
	HI3536D_H265_9CH_4POE_PNP_BD_V5_V21.1.23.3	2021-06-19 14:28:10
	NVR_MC6830_9CH_4POE_PNP_BD_V5_update_KITS_V20.1.43.5	2021-01-14 10:17:01
	NVR_MC6830_9CH_AL_V5_update_V20.1.47.3	2021-01-06 10:12:45
	NVR_HI3536D_H265_2G_8POE_BD	2020-03-03 10:06:06
	NVR_HI3536D_H265_9CH_4POE_PNP_BD	2020-02-24 09:22:24
	NVR_HI3536D_H265_2G_9CH_BD	2020-01-17 14:36:47
	NVR_HI3798_9CH	2019-10-15 16:39:12
	NVR_HI3536D_H265_36D08.216.8POE.V8.1.19.1	2018-07-27 11:18:27
	NVR_HI3536D_H265_36D04.216.4POE.V8.1.19.1	2018-07-27 11:16:51
16CH	N3016_32NR_ALH1P8_V2.0.4.230817_R4	2023-09-04 11:14:03
	N3016_32NR_ALH1P0A0_V2.0.4.230818_R3	2023-09-04 11:04:52
	N3216_32NR_BVH2P16A4_V2.0.4.230721_R3	2023-08-16 17:29:52
	N3216_32NR_BVH2P0A4_V2.0.4.230802_R2	2023-08-16 17:22:10
	N3016_32NR_BVH1P0A0_V2.0.4.230802_R2	2023-08-16 16:54:08
	N3016_32NR_BVH1P8_V2.0.4.230727_R3	2023-08-16 14:30:32
	NVR_MC6830_16CH_16POE_PNP_HP_BD_V5_update_V22.1.24.5	2022-10-17 20:09:02
	NVR_MC6830_16CH_16POE_PNP_BD_V5_update_V22.1.24.5	2022-10-17 20:03:14
	NVR_SS621Q_16CH_8POE_PNP_BD_V5_update_V22.1.27.5	2022-10-17 19:59:39
	NVR_SS621Q_16CH_BD_V5_update_V22.1.27.5	2022-10-17 19:55:35
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_update_V21.1.21.2	2021-06-28 11:36:50
	NVR_HI3536D_H265_16CH_BD_V5_V21.1.22.6	2021-06-19 16:04:04
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_update_V21.1.20.4	2021-05-29 14:11:50
	NVR_MC6830_16CH_AL_V5_update_V20.1.47.3	2021-01-06 10:18:25
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_KITS	2020-07-14 13:40:02
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_KITS	2020-07-14 10:34:15
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_KITS	2020-07-14 10:18:00
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_KITS	2020-07-14 10:08:26
	NVR_HI3536C_H265_16CH_8POE_BD	2020-03-06 09:02:22
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD	2020-01-17 15:08:08
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD	2020-01-17 14:55:20
	NVR_HI3536D_H.265_4G_16CH_BD	2019-12-27 15:17:16
	NVR_HI3536C_H265_16CH_BD	2019-11-07 16:34:41
	NVR_HI3798_16CH	2019-10-15 16:39:52
	NVR_HI3536C_H265_16CH_8POE_PNP2_BD	2019-09-16 13:50:50
	NVR_HI3536C_H265_36C08.8POE.PNP.V8.1.26.2	2018-07-27 11:44:56
	NVR_HI3536C_H265_36C16.V8.1.15.2	2018-07-27 11:34:20
25CH	NVR_MC6830_25CH_BD_V5_update_V22.1.25.1	2022-10-17 20:12:14
	HI3536C_H265_25CH_16POE_PNP2_BD_V5_update_V22.1.24.5	2022-07-05 20:26:15
	NVR_MC6830_25CH_16POE_PNP_BD_V5_update_V22.1.2.2.zip	2022-04-18 11:42:09
	NVR_MC6830_25CH_16POE_PNP_HP_BD_V5_update_V22.1.1.2	2022-02-15 18:00:12
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD_V5_update_V21.1.21.6	2021-06-01 16:56:24
	NVR_HI3536C_H265_25CH_BD_V5_update_V21.1.21.2	2021-05-29 14:26:37
	NVR_HI3536C_H265_25CH_16POE_PNP2_BD	2020-04-20 17:06:06
	NVR_HI3536C_H265_25CH_BD	2020-01-17 15:20:17
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD	2019-12-19 19:06:55
	NVR_HI3536C_H265_36C16.16POE.PNP.V8.1.27.3	2018-07-27 13:38:36
	NVR_HI3536C_H265_36C25.V8.1.15.2	2018-07-27 13:33:58
32CH	N3332_32NR_ALH2P0A4_V2.0.4.230825_R2	2023-09-04 10:49:14
	N3332_32NR_ALH2P16A4_V2.0.4.230825_R2	2023-09-04 10:47:17
	N3332_32NR_BVH2P16A4_V2.0.4.230825_R10	2023-09-04 10:37:09
	N3332_32NR_BVH4P0A16_V2.0.4.230725_R4	2023-08-24 09:38:54
	N3332_32NR_BVH4P24A16_V2.0.4.230731_R4	2023-08-24 09:35:48
	N3332_32NR_BVH2P0A4_V2.0.4.230815_R7	2023-08-23 14:07:20
36CH	HI3536_H265_36CH_BD_V5_update_V21.1.24.6	2021-07-30 15:27:09
	NVR_HI3536_H265_36CH_X1_BD_V5_V20.1.37.6	2020-09-12 17:27:23
	NVR_HI3536_H265_36CH_BD	2020-02-21 16:45:09
	NVR_HI3536_H265_36CH_X1_BD	2019-09-16 15:30:50
	NVR_HI3536_36_V8.1.20.5	2018-07-27 13:47:16
64CH	N3664_32NR_BVH8P16A16_V2.0.4.230810_R3	2023-08-24 09:24:33
	N3664_32NR_BVH8P0A16_V2.0.4.230811_R9	2023-08-24 09:22:14
	HI3536_H265_64CH_BD_V5_update_V22.1.22.1	2022-10-17 20:15:51
	NVR_HI3536_H265_64CH_BD	2020-03-13 15:45:58
	NVR_HI3536_64_V9.1.13.5	2019-04-13 15:11:55

NOVATEK IP Camera

The NT IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom.

NOVATEK IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	KF2_1ND_BVHB_V1.0.3.230926_R1	2023-10-23 13:46:17
5MP	AI	KL5_1ND_BVHB_V2.0.11.231012_R2	2023-10-23 13:49:17
8MP	AI	KL8_1ND_BVHB_V2.0.8.230925_R1	2023-10-09 16:31:55

Rockchip IP Camera

The RK IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ,HDR, lens control, alarm input and output, buffer storage and network transmission and other functions.

Rockchip IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	RV1109_IMX307_BASE_W_23.1.41.4	2023-10-23 14:40:30
2MP	AI	RV1109_IMX307NAND_BASE_W_23.1.06.2	2023-02-21 11:42:23
5MP	AI	RV1109_IMX335NAND_BASE_W_23.1.42.2	2023-10-23 14:47:41
5MP	AI	RV1109_IMX335_BASE_W_23.1.39.1	2023-10-09 14:02:51
8MP	AI	RV1126_IMX415_BASE_W_23.1.39.3	2023-10-09 14:05:07
4MP	AI	RP4_8E_BTHB_V2.0.5.230925_R1	2023-10-09 14:10:53

Fullhan IP Camera

The Fullhan High-definition network camera has adopted embedded system and a number of advanced IT technologies,which integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

Fullhan IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	FH8852_F23_B1T0A1M0C0P1_W_21.1.26.6	2021-07-07 10:10:27
		FH8852_IMX307_B1T0A1M0C0P1_W_20.1.51.3	2021-02-06 16:46:23
		FH8852_F23_B1T0A1M0C0P2_W_20.1.27.4	2021-02-06 16:44:14
		FH8852_IMX307_B1T0A1M0C0P2_W_20.1.29.3	2020-08-07 19:19:34
		FH8830_F22_W_8.1.11.5	2020-06-04 15:43:29
	AI	FG2_16NR_BVHB_V2.0.7.231117_R1	2023-12-28 16:39:35
	WIFIIPC	HFG2_16NR_BVHB_V2.0.2.230927_R1	2023-10-23 13:56:29
3MP	FISHEYE	FH8830_AR0330_FISHEYE_W_9.1.15.4	2020-06-04 15:46:30
3MP	FISHEYE	FH8830_AR0330_FISHEYE_BD_W_9.1.2.1	2020-06-04 15:43:43
4MP	Normal	FH8856_IMX335_B1T0A1M0C0P1_W_21.1.26.4	2021-07-07 10:13:08
	Normal	FH8856_IMX335_B1T0A1M0C0P2_W_20.1.27.3	2020-08-07 16:50:26
	AI	FG4_16NR_BVHB_V2.0.3.231102_R1	2023-12-28 16:43:41
	WIFIIPC	FW4_16NR_BVHB_V2.0.2.230927_R1	2023-10-23 13:57:13
5MP	Normal	FH8856_K05_B1T0A1M0C0P1_W_21.1.26.1	2021-07-07 10:15:45
	SD	FH8856_K05_B1T1A1M0C0P1_W_21.1.26.1	2021-07-07 10:16:03
	WIFIIPC_SD	FH8856_K05_W1T1A1M0C0P1_W_21.1.51.1	2022-01-20 17:58:46
	WIFIIPC_SD	FH8856_K05_W1T1A1M0C0P2_W_20.1.28.2	2020-08-07 16:14:08

GK IP Camera

GK IP Camera uses an embedded system and a number of advanced IT technologies, such as audio and video encoding and decoding technologies (h.264, h.265, h.265+, H264+), integrated encoding and compression, supporting audio noise reduction, and response cancellation, Support humanoid detection, support full Netcom function, can realize plug-and-play access to the back-end.

GK IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	GC2_16NR_ALHB_V2.0.4.230831_R2	2023-10-23 14:01:31
2MP	AI	GC2_8NR_ALHB_V1.0.2.211028_R2	2021-11-12 17:00:50
3MP	AI	GS3_8NR_ALHB_V1.0.1.211028_R2	2021-11-12 17:01:23
4MP	AI	GC4_16NR_ALHB_V1.0.2.220926_R1	2023-02-21 17:51:22
4MP	AI	GC4_8NR_ALHB_V1.0.0.211009_R5	2021-11-12 17:03:27
5MP	AI	GL5_16NR_ALHB_V2.0.3.230714_R2	2023-08-05 17:32:48

XVR

The Embedded Hybrid Digital Video Recorder is compatible with HDTVI,AHD and other coaxial HD specification,which can be accessed to any HDTVI,CVI,AHD,analog and network signal.It can disable numbers of analog channels and convert them to IP channels,which have both functions of DVR and NVR.

XVR

Channels	Version Info	Time	Download Url
4CH	XVR_MC6630_2830_4_BD_V5_updateV22.1.23.5	2022-10-17 20:26:06
	XVR_MC6630_2830_4_BD_4G_V5_updateV22.1.24.5	2022-10-17 20:21:08
	XF5004_16FH_BVH1B4_V1.0.1.220311_R2	2022-09-29 15:41:26
	XVR_3521D_6158_4_BD_V5_updateV22.1.9.4.zip	2022-04-18 14:11:54
	SDI_DVR_3521D_334S_4_BD_updateV21.1.31.3	2021-09-10 09:40:45
	X2104_16TP_BVH1B4_V1.0.0.210901_R4	2021-09-08 10:18:15
	XVR_3520DV400_6158C_4_BD_2G_V5_updateV21.1.26.6	2021-07-30 17:13:31
	XVR_3520DV400_6158C_4_BD_4G_V5_updateV21.1.27.4	2021-07-30 17:10:26
	XVR_3520DV400_6158C_4_BD_V5_updateV21.1.26.1	2021-07-30 17:01:58
	XVR_MC6630_2830_4_AL_V5_updateV20.1.48.2	2021-01-06 16:33:09
	XVR_MC6630_2830_4_AL_4G_V5_updateV20.1.48.5	2021-01-06 16:28:16
	XVR_3531D_6158_4_BD_V	2020-05-21 14:10:48
	XVR_3520DV400_6158C_4_BD_4G_V	2020-05-07 10:10:24
	XVR_3520DV400_6158C_4_BD_V	2020-04-09 17:22:06
	XVR_3521D_6158_4CH_BD_V	2020-04-07 10:47:07
	XVR_3520DV400_6158C_4_BD_2G	2019-08-16 09:00:44
	XVR_3520DV200_6134C_4_v	2019-03-08 15:05:02
	XVR_3520DV400_6158_4_BD_V	2019-02-28 14:07:49
	XVR_3520DV200_6134C_4_BD_V	2019-01-30 16:31:38
	XVR_3521D_6158_SMARTKITS_4_BD_V	2019-01-09 14:09:24
	XVR_3520DV200_6134C_SMARTKITS_4_BD_V	2019-01-09 10:29:13
	XVR_HI3520DV200_4_V	2018-10-25 15:53:28
	XVR_3520DV200_4_v	2018-06-14 20:16:43
	XVR_3531D_6158_4_v	2018-06-14 20:06:20
	SDI_DVR_3521A_334S_4_v	2018-04-23 18:39:49
	XVR_3521D_6158_4_v	2018-04-23 18:35:38
	XVR_3520DV300_2826_4_v	2018-04-23 18:24:39
	XVR_3521A_2826_4_v	2018-04-23 18:04:09
	XVR_HI3521A_4_v	2017-10-26 16:05:50
8CH	XF5008_16FH_BVH1B8_V1.0.1.220317_R3	2022-09-29 15:13:00
	XVR_3521D_6158C_8_BD_V5_updateV22.1.9.4.zip	2022-04-18 14:34:30
	XVR_3531D_6158_8_BD_V5_updateV22.1.11.2.zip	2022-04-18 14:26:48
	XVR_MC6630_2830_8_BD_V5_updateV22.1.6.6.zip	2022-04-18 14:16:19
	SDI_DVR_3531D_334S_8_BD_updateV21.1.31.3	2021-09-10 09:33:34
	X2108_16TP_BVH1B8_V1.0.1.210827_R2	2021-09-08 10:25:22
	XVR_3520DV400_6158C_8_BD_V5_updateV21.1.26.1	2021-08-02 10:12:23
	XVR_MC6630_2830_8_AL_V5_updateV20.1.48.2	2021-01-06 16:37:17
	XVR_3520DV400_6158C_8_BD_V	2020-04-30 15:39:08
	XVR_3531D_6158_8_BD_V	2020-04-20 16:07:30
	XVR_3521D_6158C_8_BD_V	2020-04-07 10:41:55
	XVR_3521D_6158_8_BD_V	2019-03-11 14:07:43
	XVR_3520DV300_6134C_8_v	2019-03-08 15:05:49
	XVR_3520DV400_6134C_8_BD_V	2019-03-01 09:10:08
	XVR_3531DCAS_6158_16_8_BD_V	2019-01-29 15:11:55
	XVR_3531DCAS_6158_8_BD_V	2019-01-19 15:00:33
	XVR_HI3531A_8_v	2018-07-03 09:31:45
	XVR_3521D_6158_8_v	2018-06-15 08:42:00
	XVR_3520DV300_8_v	2018-06-14 19:56:18
	SDI_DVR_3531A_334S_8_v	2018-04-23 19:04:14
	XVR_3531D_6158_8_v	2018-04-23 19:02:21
	XVR_3521A_2826_8_v	2018-04-23 18:55:07
	XVR_3531A_2826_8_v	2018-04-23 18:48:12
	XVR_HI3520DV300_8_v	2018-02-09 16:14:20
16CH	XF5016_16FH_BVH2B16_V1.0.1.220424_R6	2022-09-29 15:33:45
	XF5016_16FH_BVH1B16_V1.0.1.220317_R4	2022-09-29 15:22:05
	XVR_3521D_6158C_16_BD_V5_updateV22.1.14.5.zip	2022-04-18 14:52:24
	XVR_3531D_6158C_16_2_BD_V5_updateV22.1.9.4.zip	2022-04-18 14:48:27
	XVR_3531D_6158C_16_BD_V5_updateV22.1.12.1.zip	2022-04-18 14:45:29
	XVR_3531DCAS_6158_16_BD_V5_updateV22.1.12.3.zip	2022-04-18 14:41:41
	SDI_DVR_3531DCAS_334S_16_BD_updateV21.1.31.3	2021-09-10 09:38:48
	X2116_16TP_BVH2B16_V1.0.1.210827_R2	2021-09-08 10:37:23
	X2116_16TP_BVH1B16_V1.0.1.210827_R2	2021-09-08 10:30:05
	XVR_3531DCAS_6158_16_BD_V	2020-05-21 08:51:20
	XVR_3531D_6158C_16CH_2_BD_V	2020-04-20 19:19:14
	XVR_3531D_6158C_16_BD_V	2020-04-20 19:15:57
	XVR_3521D_6158C_16_BD_V	2020-04-07 10:44:06
	XVR_3531D_6158C_16_BD_X1_V	2019-09-23 16:57:22
	XVR_3521D_6134C_16_BD_V	2019-03-15 13:39:18
	XVR_3531D_6158_16_BD_V	2019-01-19 14:57:17
	XVR_3531A_2826_16_v	2018-09-17 17:15:07
	XVR_3521D_6134C_16_v	2018-07-27 11:05:18
	XVR_3521A_16_v	2018-07-16 15:38:04
	XVR_3531D_6158_16_v	2018-06-15 08:43:36
	XVR_HI3521A_16_v	2018-06-15 08:34:06
32CH	XVR_3531DCAS_6158_32_BD_V	2019-04-24 15:10:29
	XVR_3531D_6134C_32_BD_V	2019-01-30 09:46:04
	XVR_3531A_2816_32_v	2018-04-23 19:15:13
	XVR_HI3531A_32_v	2018-02-09 16:53:32

PC Client

VMS is an application platform software that can be used with embedded network monitoring equipment.It supports monitoring equipment by Onvif network protocol, integrated preview, video, playback, backup, PTZ control, alarm management and other functions,to provide flexible and diverse deployment programs, can be widely used in finance, public security, military, transportation, education and other fields of security projects.

PC Client

Channels	Version Info	Time	Download Url
iVMS810(MAC)	iVMS810_Mac-B1130.1.0.2.zip	2023-11-06 15:25:31
iVMS810(Windows)	iVMS810_Win64-B1130.1.0.2.230925	2023-11-06 15:01:15
iVMS320(Windows)	iVMS320_Windows_V23.1.3.230831_R2	2023-09-20 09:42:00
iVMS320(Mac)	iVMS320_Mac_V22.1.5.221027_R4	2022-11-01 12:42:35
iVMS330(Windows)	iVMS330_20.2.42.5_Setup	2020-10-23 13:51:04
VMSLite (Windows)	VMSLite Setup8.2.44.2	2019-04-11 10:53:25
VMS (Windows)	VMS Setup8.2.29.6	2018-07-20 09:50:49
VMSLite (Mac)	VMSLite for Mac8.2.29.6	2018-07-19 15:31:29

Wifi kits

The wifi nvr kits developed from 100W to 400W HD quality,and adopted audio/video codec technology,embedded system technology,storage technology,network technology,etc.It matches to wireless wifi,WIFI connection supports 2.4G and 5.8G band,plug and play.It is suitable for various scenes,which can connect several cameras to realize omnidirectional non-dead angle monitoring

Wifi kits

Resolution	Type	Firmware	Time	Download Url
1MP	4CH	NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 15:59:40
	4CH	3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:59:21
	9CH	NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 15:59:03
	9CH	3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:58:34
2MP	4CH	3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:07:53
		NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 16:02:47
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:02:25
		NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:02:09
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:01:50
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:01:32
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:01:13
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:00:55
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:00:39
	9CH	FH8852V200W_JXF23_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:11:00
		3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:08:32
		NVR_SS621Q_9CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 19:43:34
		NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 16:05:18
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:04:59
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:04:41
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:04:20
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:04:05
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:03:46
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:03:32
		NVR_WIFI3536D2G_HW01_BD_9_V9.1.1.4	2020-06-04 16:03:11
4MP	4CH	NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:05:58
	4CH	3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:05:37
	9CH	NVR_HIWIFI3798_9_V7.1.38.2	2020-06-04 16:09:01
		3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:06:45
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:06:27
5MP	4CH	FH8856V500W_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:52:05
		NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-03-10 14:50:25
		NVR_WIFI3536D2G_HW01_4_V8.1.38.5	2020-06-04 16:11:58
		3516D_OS05A10_W30T0A1M0C1_W_8.1.38.3	2020-06-04 16:11:28
		NVR_WIFI3536D2G_HW01_BD_4_V9.1.1.4	2020-06-04 16:11:08
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:10:41
8MP	4CH	FH88568_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:43:37
8MP	4CH	NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 17:52:14

SigmaStar IP Camera

The SigmaStar IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control

SigmaStar IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	SSC336Q_SC200AI_W_22.1.06.2	2022-04-02 10:18:59
5MP	AI	SSC338Q_SC500AI_W_22.1.43.1	2023-02-21 17:40:43
8MP	AF	SSC338Q_SC8238_W_22.1.45.4	2023-02-21 17:33:13
8MP	WH	SSC338Q_SC500AI4K_W_23.1.28.5	2023-08-05 17:39:53

Hisilicon IP Camera

The Hisilicon High-definition network camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

Hisilicon IP Camera

Resolution	Type	Firmware	Time	Download Url
1MP	Normal	3518EV200_OV9732_W_8.1.30.5	2020-06-04 13:48:46
1.3MP	Normal	3518EV200_IMX225_W_7.1.34.5	2020-06-04 13:49:26
1.3MP	Normal	3518EV200_S3130_W_7.1.25.1	2020-06-04 13:49:05
2MP	Normal	3516EV200_IMX307_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:09
		3516EV200_F23_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:02:03
		3516CV500_IMX307_B1T0A1M0C0P1_W_20.1.28.2	2020-08-07 19:06:19
		3516CV500_IMX462_B1T0A1M0C0P1_W_20.1.29.2	2020-08-07 15:32:07
		3518EV200_IMX323_W_7.1.25.1	2020-06-04 14:13:38
		3516CV200_OV2718_W_7.1.26.4	2020-06-04 14:13:20
		3516CV300_IMX290_W_8.1.9.3	2020-06-04 14:13:02
		3516CV200_IMX323_W_7.1.25.2	2020-06-04 14:12:39
		3516D_IMX290_W_7.1.32.3	2020-06-04 14:08:48
		3516CV300_IMX323_W_8.1.9.3	2020-06-04 14:08:20
		3516CV300_IMX323_B1T0A1M0C1_W_9.1.5.2	2020-06-04 14:01:32
		3516CV300_IMX307_B1T0A1M0C1_W_9.1.5.1	2020-06-04 14:01:04
		3516CV300_IMX327_B1T0A1M0C1_W_9.1.9.5	2020-06-04 14:00:43
		3516EV100_F23_B1T0A1M0C1_W_9.1.12.2	2020-06-04 14:00:15
		3516CV300_IMX307_B1T0A1M0C1P1_W_20.1.3.2	2020-06-04 13:59:51
		3516CV300_IMX323_B1T0A1M0C1P1_W_9.1.1.6	2020-06-04 13:56:16
		3516CV300_IMX327_B1T0A1M0C1P1_W_20.1.2.3	2020-06-04 13:55:57
		3516EV100_F23_B1T0A1M0C1P1_W_9.1.1.6	2020-06-04 13:55:39
		3516EV200_SP2309_B1T0A1M0C0P1_W_9.1.26.2	2020-06-04 13:52:12
	SD	3516CV500_IMX462_B1T1A2M1C2P1_W_20.1.32.5	2021-02-06 16:09:31
		3516EV200_IMX307_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:35
		3516CV500_IMX307_B1T1A2M1C2P1_W_20.1.33.4	2021-02-06 16:02:50
		3516EV200_F23_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:01:26
		3516CV500_IMX307_B1T1A1M0C0P1_W_20.1.28.2	2020-08-07 19:04:42
		3516CV500_IMX462_B1T1A1M0C0P1_W_20.1.29.2	2020-08-07 15:31:19
		3516CV300_IMX323_TF_W_8.1.6.6	2020-06-04 14:24:33
		3516CV300_IMX290_TF_W_8.1.6.6	2020-06-04 14:24:10
		3516CV300_IMX323_B1T1A1M0C1_W_9.1.5.2	2020-06-04 14:23:51
		3516CV300_IMX323_B2T1A1M0C1_W_9.1.5.2	2020-06-04 14:23:32
		3516CV300_IMX307_B1T1A1M0C1_W_9.1.5.1	2020-06-04 14:23:15
		3516CV300_IMX307_B2T1A1M0C1_W_9.1.5.1	2020-06-04 14:22:58
		3516CV300_IMX327_B2T1A1M0C1_W_9.1.9.5	2020-06-04 14:22:09
		3516CV300_IMX327_B1T1A1M0C1_W_9.1.9.5	2020-06-04 14:21:51
		3516CV300_IMX307_B1T1A1M0C1P1_W_20.1.3.2	2020-06-04 14:21:17
		3516CV300_IMX307_B2T1A1M0C1P1_W_20.1.3.2	2020-06-04 14:20:56
		3516CV300_IMX323_B1T1A1M0C1P1_W_9.1.1.6	2020-06-04 14:20:33
		3516CV300_IMX323_B2T1A1M0C1P1_W_9.1.1.6	2020-06-04 14:20:08
		3516CV300_IMX327_B1T1A1M0C1P1_W_20.1.2.3	2020-06-04 14:16:38
		3516CV300_IMX327_B2T1A1M0C1P1_W_20.1.2.3	2020-06-04 14:16:17
		3516EV200_SP2309_B1T1A1M0C0P1_W_9.1.26.2	2020-06-04 14:15:56
	SL	3516CV300_IMX290_W_SL_8.1.15.3	2020-06-04 14:25:12
	MINI	3516CV500_IMX307_MINI_WIFI_BD_W_20.1.28.2	2020-08-07 19:04:03
		3516CV500_IMX307_MINI_BD_W_20.1.28.2	2020-08-07 16:06:01
		3516CV300_IMX290_MINI_W_7.1.48.2	2020-06-04 14:26:25
		3516D_IMX290_W_MINI_7.1.27.3	2020-06-04 14:26:07
		3516CV300_IMX307_MINI_BD_W_20.1.16.4	2020-06-04 14:25:51
	PTZ	3516EV200_IMX307_X10T1A1M0C0P1_W_20.1.33.3	2021-02-06 16:59:48
		3516CV500_IMX462_X10T1A1M0C0P1_W_20.1.33.4	2021-02-06 16:59:02
		3516CV500_IMX307_X10T1A1M0C0P2_W_20.1.25.4	2020-08-07 19:03:37
		3516CV500_IMX307_X10T1A1M0C0P1_W_20.1.28.2	2020-08-07 19:03:13
		3516CV300_IMX290_AF_5X_W_8.1.10.1	2020-06-04 14:35:52
		3516CV300_IMX323_AF_5X_W_8.1.9.3	2020-06-04 14:35:35
		3516CV300_IMX290_AF_5X485_W_7.1.36.4	2020-06-04 14:35:12
		3516CV300_IMX323_AF_5X485_W_7.1.37.2	2020-06-04 14:33:56
		3516CV300_IMX323_X10T0A1M0C1_W_9.1.8.2	2020-06-04 14:32:57
		3516CV300_IMX323_X10T1A1M0C1_W_9.1.8.2	2020-06-04 14:32:38
		3516CV300_IMX323_X11T1A1M0C1_W_9.1.8.2	2020-06-04 14:32:21
		3516CV300_IMX307_X10T0A1M0C1_W_9.1.7.1	2020-06-04 14:32:01
		3516CV300_IMX307_X10T1A1M0C1_W_W_9.1.7.1	2020-06-04 14:31:18
		3516CV300_IMX307_X11T1A1M0C1_W_9.1.7.1	2020-06-04 14:31:00
		3516CV300_IMX327_X10T0A1M0C1_W_9.1.11.1	2020-06-04 14:30:40
		3516CV300_IMX327_X10T1A1M0C1_W_9.1.11.1	2020-06-04 14:30:20
		3516CV300_IMX327_X11T1A1M0C1_W_9.1.11.1	2020-06-04 14:30:00
		3516CV300_IMX307_X10T0A1M0C1P1_W_20.1.3.2	2020-06-04 14:29:42
3516CV300_IMX307_X10T1A1M0C1P1_W_20.1.3.2		2020-06-04 14:29:22
3516CV300_IMX307_X11T1A1M0C1P1_W_20.1.3.2		2020-06-04 14:29:04
3516CV300_IMX323_X10T0A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:44
3516CV300_IMX323_X10T1A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:25
3516CV300_IMX323_X11T1A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:05
3516CV300_IMX327_X10T0A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:43
3516CV300_IMX327_X10T1A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:28
3516CV300_IMX327_X11T1A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:13
WIFI IPC_SD	3516CV300_IMX323_W_WIFIIPC_SD_8.1.5.5	2020-06-04 14:36:43
	3516CV300_IMX323_W1T1A1M0C1_W_9.1.8.2	2020-06-04 14:36:28
	3516CV300_IMX323_W1T1A1M0C1P1_W_20.1.16.4	2020-06-04 14:36:13
GUARD	3516CV300_IMX327_GUARD_BD_W_9.1.1.6	2020-06-04 14:37:06
AI	3516CV500_IMX307_AR_EM_AF_BD_W_21.1.3.5	2021-02-06 17:05:11
	3516CV500_IMX307_AR_EM_BASE_BD_W_20.1.52.2	2021-01-20 10:56:02
	3516CV500_IMX327_AR_EM_BASE_BD_W_21.1.2.6	2021-01-20 10:54:38
	3516CV500_IMX327_AD_BASE_BD_W_9.1.27.2	2020-06-04 14:40:21
	3516CV500_IMX327_AR_BASE_BD_W_9.1.27.5	2020-06-04 14:40:05
	3516CV500_IMX327_AR_AF_BD_W_9.1.34.4	2020-06-04 14:39:46
3MP	Normal	3516D_IMX123_W_8.1.10.3	2020-06-04 14:41:10
4MP	Normal	3516D_OV4689_W_7.1.35.4	2020-06-04 14:41:42
	SD	3516D_OV4689_W_SD_8.1.32.3	2020-06-04 14:42:29
	SD	3516D_OV4689_W_SD_S_8.1.6.2	2020-06-04 14:42:10
	BOX	3516D_OV4689_W_BOX_7.1.49.3	2020-06-04 14:43:06
	PTZ	3516D_OV4689_5NEWPTZ_W_SD_8.1.24.1	2020-06-04 14:47:40
	PTZ	3516D_OV4689_5NEWPTZ485_W_SD_8.1.15.2	2020-06-04 14:47:25
	WIFIIPC_SD	3516D_OV4689_W_WIFIIPC_SD_8.1.12.3	2020-06-04 14:48:04
	FISHEYE	3516D_IMX326_FISHEYE_MAX_W	2019-04-03 09:29:20
		3516D_IMX326_FISHEYE_BD_W	2019-01-09 10:52:17
		3516D_IMX326_FISHEYE_W	2017-10-20 16:50:24
	MINI	3516DV300_IMX335_MINI_WIFI_BD_W_20.1.33.6	2021-02-06 16:53:02
5MP	Normal	3516DV200_IMX335_B1T0A1M0C0P1_W_20.1.47.6	2021-02-06 16:04:48
		3516A_IMX178_W_8.1.11.6	2020-06-04 15:17:23
		3516D_OS05A10_B1T0A1M0C1_W_9.1.12.5	2020-06-04 15:17:06
		3516D_OS05A10_B1T0A1M0C1P1_W_9.1.53.1	2020-06-04 15:16:48
		3516D_IMX335_B1T0A1M0C1P1_W_9.1.52.2	2020-06-04 15:16:29
	SD	3516DV200_IMX335_B1T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:05:08
		3516DV200_IMX335_B1T1A2M1C2P1_W_20.1.48.1	2021-02-06 16:03:56
		3516D_OS05A10_B1T1A1M0C1_W_9.1.12.5	2020-06-04 15:20:56
		3516D_OS05A10_B2T1A1M0C1_W_9.1.12.5	2020-06-04 15:19:46
		3516D_OS05A10_B1T1A1M0C1P1_W_9.1.53.1	2020-06-04 15:19:25
		3516D_OS05A10_B2T1A1M0C1P1_W_9.1.53.1	2020-06-04 15:18:44
		3516D_IMX335_B1T1A1M0C1P1_W_9.1.52.2	2020-06-04 15:17:53
	BOX	3516D_OS05A10_BOX_W_9.1.12.3	2020-06-04 15:21:40
	BOX	3516D_OS05A10_BOX_BD_W_9.1.1.6	2020-06-04 15:21:25
	PTZ	3516DV200_IMX335_X80T1A2M1C0P1_W_21.1.5.7	2021-02-22 14:30:06
		3516DV200_IMX335_X10T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:55:14
		3516D_OS05A10_X10T0A1M0C1_W_9.1.12.5	2020-06-04 14:45:44
		3516D_OS05A10_X10T1A1M0C1_W_9.1.12.5	2020-06-04 14:45:22
		3516D_OS05A10_X11T1A1M0C1_W_9.1.12.5	2020-06-04 14:44:54
		3516D_OS05A10_X10T0A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:40
		3516D_OS05A10_X10T1A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:24
		3516D_OS05A10_X11T1A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:02
		3516D_IMX335_X10T0A1M0C1P1_W_9.1.52.2	2020-06-04 14:43:45
		3516D_IMX335_X10T1A1M0C1P1_W_9.1.52.2	2020-06-04 14:43:30
	WIFIIPC_SD	3516D_OS05A10_W1T1A1M0C1_W_9.1.12.4	2020-06-04 15:23:01
		3516D_OS05A10_W2T1A1M0C1_W_9.1.12.4	2020-06-04 15:22:42
		3516D_OS05A10_W1T1A1M0C1P1_W_9.1.1.6	2020-06-04 15:22:26
		3516D_OS05A10_W2T1A1M0C1P1_W_9.1.1.6	2020-06-04 15:22:08
	AI	3516DV300_IMX335_AR_EM_BASE_BD_W_21.1.13.5	2021-04-12 11:04:03
		3516DV300_IMX335_AR_EM_AF_BD_W_21.1.11.2	2021-04-12 11:03:32
		3516DV300_IMX335_AR_BASE_BD_W_9.1.27.5	2020-06-04 15:15:17
		3516DV300_IMX335_AR_AF_BD_W_9.1.35.2	2020-06-04 15:15:03
6MP	SD	3516aV200_IMX326_W_8.1.2.2	2020-06-04 15:24:02
6MP	PTZ	3516AV200_IMX326_AF4X_AUDIO_TF_W_8.1.13.1	2020-06-04 15:25:34
8MP	Normal	3516AV300_IMX415_B1T0A1M0C0P1_W_20.1.35.3	2021-02-06 15:54:48
	Normal	3516AV300_IMX415_B1T0A1M0C0P2_W_20.1.26.2	2020-08-07 18:55:00
	SD	3516AV200_OS08A10_B1T1A1M0C0P1_W_20.1.33.5	2021-02-06 15:56:08
		3516AV300_IMX415_B1T1A2M1C0P1_W_20.1.35.3	2021-02-06 15:55:20
		3516AV300_IMX415_B1T1A2M1C0P2_W_20.1.26.2	2020-08-07 18:55:52
		3519V100_IMX274_W_7.1.39.3	2020-06-04 15:26:35
		3516AV200_IMX274_W_9.1.16.3	2020-06-04 15:26:21
		3516AV200_IMX274_B1T1A1M0C0P1_W_20.1.13.3	2020-06-04 15:25:51
	PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
		3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
		3516AV200_IMX274_AF4X_AUDIO_TF_W_8.1.15.2	2020-06-04 15:27:21
	WIFIIPC_SD	3516AV200_OS08A10_W2T1A1M0C1P1_W_9.1.1.5	2020-06-04 15:27:44
	AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46
12MP	SD	3519V101_IMX226_B1T1A1M0C0P1_W_20.1.13.2	2020-06-04 15:28:08
	BOX	3519V101_IMX226_BOX_BD_W_9.1.1.6	2020-06-04 15:28:22
	PTZ	3519V101_IMX226_X70T1A2M1C1P1_W_20.1.13.2	2020-06-04 15:28:37
	FISHEYE	3519V101_IMX226_FISHEYE_W_9.1.16.1	2020-06-04 15:36:22
	FISHEYE	3519V101_IMX226_FISHEYE_BD_W_9.1.46.3	2020-06-04 15:30:04

Ambarella IP Camera

The AmbarellaHigh-definition network camera has adopted embedded system and a number of advanced IT technologies,which integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

Ambarella IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	s2l33m_imx322_W_7.1.25.1	2020-06-04 15:39:53
3MP	Normal	s2l55m_imx123_W_7.1.25.2	2020-06-04 15:40:25
4MP	Normal	S2L55M_OV4689_W_7.1.18.3	2020-06-04 15:42:54
6MP	FISHEYE	S2E66_IMX178_W_7.1.3.4	2020-06-04 15:43:12

Tools

The Search Tool is a tool for searching online devices.The software can search the local area network with all the online devices,and can display the device relevant information.The Search Tool can also be used to modify the device’s network parameters individually or in batch,upgrade device individually,and modify the device password in batch.

Tools

Tool name	Version Info	Time	Download Url
Search Tool(Windows)	SearchTool for WIN_V1.5.3.231115_R1	2023-12-13 14:22:03
Search Tool(Mac)	SearchTool for MacOS_1.3.0.220121_R2	2022-01-24 14:54:13
TestTool(Windows)	TestTool_v2.0.3.6906	2020-07-08 15:01:38
IPWizardIII(Windows)	IPWizardIII_2.2.5	2018-11-07 16:38:30

Manual

The manual provides documents such as the Quick Start Guide for electronic files, User Manuals, and Installation Guide for each product, making it easy to understand each product in a simple or comprehensive way!

Manual

Class	Title	Language	Type	Time	Download Url
IPC	IP PTZ web6.0 User Manual	English	pdf	2022-11-24 19:03:12
	IP Camera Quick Start Guide Web6.0	English	pdf	2022-10-20 11:35:14
	IP Camera Web6.0 User Manual	English	pdf	2022-06-27 19:12:28
	Wi-Fi IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:52
	Smart IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:17
	IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:27:47
	Wi-Fi IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:11:09
	Smart IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:39
	IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:01
	Dual Smart IP Camera Quick Start Guide BD	English	pdf	2020-07-13 11:00:58
	Camera Quick Installation Guide（Split Type）	English	pdf	2019-09-30 15:37:20
	IP Camera Quick Start Guide CK	English	pdf	2019-08-15 13:35:42
	Wi-Fi IP Camera Quick Start Guide BD	English	pdf	2019-07-12 10:18:00
	Smart IP Camera Quick Start Guide BD	English	pdf	2019-05-14 16:48:50
	IP Camera Quick Start Guide BD	English	pdf	2018-09-21 08:33:56
	Camera Quick Installation Guide	English	pdf	2018-06-19 16:11:51
	WiFi IP Camera Quick Start Guide	English	pdf	2018-06-19 16:11:38
	IP Camera User Manual	English	pdf	2018-06-19 16:11:19
	IP Camera Quick Start Guide	English	pdf	2018-06-19 09:25:31
NVR	NVR Quick Start Guide_6.0.pdf	English	pdf	2023-08-04 14:16:26
	NVR User Manual_6.0	English	pdf	2022-10-20 10:18:03
	NVR Quick Start Guide BD 6.0	English	pdf	2022-10-20 10:17:26
	NVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:20:12
	NVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:19:40
	NVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:18:41
	NVR User Manual_5.0	English	pdf	2020-05-28 13:34:56
	NVR Quick Start Guide BD_5.0	English	pdf	2020-04-09 16:26:42
	Wi-Fi NVR Quick Start Guide BD	English	pdf	2019-10-18 14:04:24
	Smart NVR Quick Start Guide BD	English	pdf	2019-07-09 17:00:34
	NVR Quick Start Guide BD	English	pdf	2018-09-03 09:02:14
	NVR User Manual	English	pdf	2018-06-19 16:12:58
	NVR Quick Start Guide	English	pdf	2018-06-19 09:32:18
XVR	XVR User Manual_5.0	English	pdf	2020-11-11 17:47:54
	XVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:32:42
	XVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:31:59
	XVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:31:34
	XVR Quick Start Guide BD_5.0	English	pdf	2020-06-09 17:16:09
	Smart XVR Quick Start Guide	English	pdf	2019-09-03 08:39:55
	XVR Quick Start Guide BD	English	pdf	2018-09-04 16:11:40
	XVR Quick Start Guide	English	pdf	2018-06-19 16:26:52
	XVR User Manual	English	pdf	2018-06-19 16:26:30
EX-SDI&HD-SDI DVR	EX-SDI&HD-SDI DVR User Manual	English	pdf	2018-12-21 08:28:55
	EX-SDI&HD-SDI DVR Quick Start Guide BD	English	pdf	2018-09-03 09:07:57
	EX-SDI&HD-SDI DVR Quick Start Guide	English	pdf	2018-07-11 10:15:48
PLC Kits	PLC Kits Quick Start Guide	English	pdf	2018-06-19 16:30:26
PoE Kits	PoE Camera Security System Quick Start Guide	English	pdf	2023-09-27 14:20:55
	PoE Kits Quick Start Guide BD	English	pdf	2020-07-17 16:47:43
	PoE Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:29:19
WiFi Kits	Wi-Fi Camera Security System Quick Start Guide.pdf	English	pdf	2023-08-04 14:26:10
	Wi-Fi Kits Quick Start Guide BD PGE	English	pdf	2022-02-14 16:18:53
	Wi-Fi Kits Quick Start Guide BD 5.0	English	pdf	2021-03-30 10:25:27
	Wi-Fi Kits Quick Start Guide BD	English	pdf	2021-03-17 14:29:38
	Non-economical Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:28:04
	Economy Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:26:58
	Smart Wi-Fi Kits Quick Start Guide	English	pdf	2018-09-03 08:40:56
	Smart Wi-Fi Kits Quick Start Guide BD	English	pdf	2018-08-24 09:40:43
	Economy WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:37:07
	Non-economical WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:36:55
XVR Kits	XVR Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:27:25
	XVR Kits Quick Start Guide BD	English	pdf	2019-01-07 17:10:53
	Smart XVR Kits Quick Start Guide BD	English	pdf	2018-08-24 09:41:18
	XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:16
	Smart XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:02
Consumer WiFi Camera	LCY4B LongPlus Quick Start Guide	English	pdf	2022-06-23 16:09:43
	LCY4A LongPlus Quick Start Guide	English	pdf	2022-06-23 16:08:49
	LTP4F LongPlus Quick Start Guide	English	pdf	2022-03-28 18:06:34
	LongPlus Quick Start Guide	English	pdf	2021-03-17 14:26:03
	Consumer Fisheye Camera P3 Quick Start Guide	English	pdf	2018-06-19 16:40:37
PoE Switch	RT2418 Managed Optical Fiber PoE Switch User Manual	English	pdf	2021-07-15 13:51:11
	HT812(100M&1000M) HT811 HT412 HT1612 Series PoE Switch Quick Start Guide	English	pdf	2019-04-03 08:53:12
	RT2418 Managed Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-11-06 14:23:13
	24+2+2 Unmanaged Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:41:30
	24+2 Managed PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:40:56
Search Tool	Search Tool User Manual for Win&Mac	English	pdf	2018-06-19 17:03:49
App	iVMS380 App User Manual	English	pdf	2020-11-09 14:52:33
	Aliluya App User Manual	English	pdf	2020-08-03 15:24:55
	iVMS350 App User Manual	English	pdf	2020-08-03 15:24:20
	ACESEE App User Manual	English	pdf	2019-09-02 10:10:19
	iVMS320 App User Manual	English	pdf	2019-01-16 09:59:10
	BitVision App User Manual	English	pdf	2018-12-20 17:21:30
	FreeIP App User Manual	English	pdf	2018-06-19 16:42:20
	VR Panorama App User Manual	English	pdf	2018-06-19 16:42:05
VMS	iVMS330 Plateform User Manual for windows	English	pdf	2020-11-09 15:06:16
	iVMS320 User Manual for Mac	English	pdf	2019-04-15 15:28:59
	iVMS320 Plateform User Manual for win	English	pdf	2019-04-15 15:28:02
	VMS User Manual for Mac	English	pdf	2018-06-19 16:48:21
	VMS User Manual for Win	English	pdf	2018-06-19 16:48:06
	VMS Lite User Manual for Mac	English	pdf	2018-06-19 16:45:35
	VMS Lite User Manual for Win	English	pdf	2018-06-19 16:45:24
Coaxial	Camera Quick Installation Guide(Split Type)	English	pdf	2019-11-01 15:35:23
Smart Device	AI Face Recognition Device Quick Start Guide 08GRW-EU QR	English	pdf	2021-10-09 09:23:13
	Intelligent Terminal Health code quick start guide 02	English	pdf	2021-09-28 09:33:20
	AI Face Recognition Device Quick Start Guide 08GRW	English	pdf	2021-08-03 10:13:44
	AI Face Recognition Device Quick Start Guide 08GR	English	pdf	2021-08-03 10:12:25
	AI Face Recognition Device User Manual	English	pdf	2021-07-16 10:50:34
	Smart Device 2000 Quick Start Guide 02GYWT	English	pdf	2021-04-20 14:51:30
	Smart Device 2000 Quick Start Guide 02GYT	English	pdf	2021-04-20 14:50:55
	Thermal Smart IP Camera Quick Start Guide BMMH256	English	pdf	2021-04-07 19:10:11
	Dual Smart IP Camera Quick Start Guide BD BMMH32	English	pdf	2021-04-07 19:08:54
	AI BOX Quick Start Guide 5.0	English	pdf	2021-03-30 10:35:09
	Thermal Smart IP Camera Quick Start Guide	English	pdf	2021-03-09 14:58:56
	AI Face Recognition Device Quick Start Guide 05GRW	English	pdf	2020-12-14 09:24:26
	AI Face Recognition Device Quick Start Guide 05GR	English	pdf	2020-12-12 14:45:36
	Thermal Smart IP Camera Quick Start Guide OWL256	English	pdf	2020-11-24 10:20:05
	Dual Smart IP Camera Quick Start Guide BD OWL32	English	pdf	2020-11-24 10:19:21
	Thermal Smart IP Camera User Manual	English	pdf	2020-11-04 09:13:13
	Thermal Smart IP Camera Quick Start Guide CMLDISS500T-256	English	pdf	2020-11-04 09:12:37
	Temperature Measuring Metal Detector Security Gate BD CMLDISS500T	English	pdf	2020-11-04 09:11:47
	Smart Device 2000 Quick Start Guide 03AY	English	pdf	2020-11-04 09:09:55
	Smart Device 2000 Quick Start Guide 03AYW	English	pdf	2020-08-03 15:13:17
	Smart Device 2000 Quick Start Guide 02GY	English	pdf	2020-08-03 15:11:47
	Smart Device 2000 Quick Start Guide 02GYW	English	pdf	2020-08-03 15:10:26
	Smart Device 2000 Quick Start Guide 02GYH	English	pdf	2020-08-03 15:08:36
Consumer Camera with Battery	IP Camera Quick Start Guide X86V1R4BR4A	English	pdf	2022-02-22 14:52:34
	IP Camera Quick Start Guide normal	English	pdf	2022-02-22 14:52:17
	Y2A(RX07)	English	pdf	2021-12-06 17:28:06
	R4B(X86)	English	pdf	2021-12-06 17:27:50
	R4A(V1)	English	pdf	2021-12-06 17:27:25
	R2B(V3)	English	pdf	2021-12-06 17:27:04
	R2A(X82)	English	pdf	2021-12-06 17:26:51
	Q2A(X85)	English	pdf	2021-12-06 17:26:28
	P4A(X87)	English	pdf	2021-12-06 17:26:11
	P2A(X81)	English	pdf	2021-12-06 17:25:40

BitVision

The BitVision client is an easy to use P2P network camera video monitoring professional mobile phone client software, connected by a sequence number, the only global P2P network and network cameras installed in the home or office, view real-time video images, and image capture, video. The scene situation users can learn in the shortest possible time home or office. P2P network camera of the software production and the company in the network of cooperation to normal use.

BitVision

Channels	Version Info	Time	Download Url
BitVision	BitVision_Android_V21.1.11	2021-10-12 14:45:19
	BitVision_Android_V21.1.9	2021-09-02 10:00:37
	BitVision_Android_V21.1.7	2021-07-16 08:54:29
	BitVision_Android_V20.1.46.1	2020-11-13 09:38:58

ACESEE

ACESEE is an application platform software that can be used with Smart wi-fi device, it is a service APP launched for families and businesses. Through ACESEE, you can easily check real-time and play-back videos of apartments, villas, shops, factories, offices and other places; through ACESEE ‘s alarm service, you can take safety protection at the first time once you receive abnormal information about the places you are concerned about. No matter where you are, your home and business are nearby always.

ACESEE

Channels	Version Info	Time	Download Url
ACESEE	ACESEE_Android_V1.0.41	2021-11-22 19:43:46
ACESEE	ACESEE_PC(Windows)_V1.0.0.10	2021-05-07 17:33:41

iVMS350

iVMS350 is an application platform software that can be used with Smart device。 Main function: 1:Remote-monitoring: View video via APP remotely, know what is going on anywhere and anytime; 2: Two way audio function: audio in and audio out; 3:Device sharing: Share the device with your family numbers, view together, 4:Motion detection Alarm: Alarm and picture capturing about abnormal situation, guard the security.

iVMS350

Channels	Version Info	Time	Download Url
iVMS350	IOT_iVMS350_Android_V21.1.05.3	2021-01-28 13:32:52
	IOT_iVMS350_Android_V20.1.41.4	2021-01-14 08:28:39
	IOT_iVMS350_Android_V20.1.39.1	2020-09-29 09:37:17
	IOT_iVMS350_Android_V20.1.36.4	2020-09-15 16:59:00

LongPlus

LongPlus is an application platform software that can be used with cloud device. Main function: 1:Remote-monitoring: View video via APP remotely, know what is going on anywhere and anytime; 2: Two way audio function: audio in and audio out; 3:Device sharing: Share the device with your family numbers, view together; 4:Cloud storage of timing video and alarm video.

LongPlus

Channels	Version Info	Time	Download Url
LongPlus	LongPlus_Android_V21.1.35	2021-10-14 20:36:07

IVS365

IVS365 is an application platform software that can beused with device module. Main function: 1:Remote-monitoring:View video with APP remotely,know what is going on any where and anytime; 2:Two way audio function:audio in and audio out; 3:Device sharing:Share the device with your family numbers,view together; 4:Motion detection Alarm:Alarm and picture capturing about abnormal situation,guard the security.

IVS365

Channels	Version Info	Time	Download Url
IVS365	IVS365_Android_1.0.0.211101_R6	2021-11-16 14:22:38
IVS365	IVS365_Android_1.0.0.210619_R3	2021-06-19 11:46:08

SDP2000

SDP2000 is an application platform software that can be used with smart terminal devices. It supports management devices through network protocols, integrates multiple functions such as device management, personnel management, access management, and report management. It provides flexible and diverse deployment solutions. The server can be connected to multiple intelligent terminal devices, manage multiple entrances and exits, and can be widely used in airports, entry and exit gates, train stations , government agencies, schools, scenic spots, large factories and other places that need to be identified to help customers achieve Efficient, safe and intelligent entrance and exit management

SDP2000

Channels	Version Info	Time	Download Url
SDP2000（Windows）	SDP2000_EN_x64_V2.6.3.220209_R2	2022-02-14 17:44:52

Tiandy Easy7 Smart Client Express User Manual

admin — Mon, 19 Jun 2023 14:39:06 +0000

Tiandy Easy7 Smart Client Express User Manual, This user manual is prepared based on Easy7 video monitoring system. In order to provide brief function instruction of the system and help users to systematically understand operation process, this user manual is prepared for reference.

Preface
1. Preparation purpose

This user manual is prepared based on Easy7 video monitoring system. In order to provide brief function instruction of the system and help users to systematically understand operation process, this user manual is prepared for reference.

[Note] Product real-time update will not be further notified.

1. Terms and abbreviations

N/A

Tiandy Easy7 Smart Client Express User Manual

Read More :

How to Add Device to Hik-ProConnect

DSS Express V8 User Manual

Hikvision Password Reset Do It Yourself

3. Usage Attentions
Current monthly largest quantity of human face pictures received from single channel is 1 million. The current upper limit of quantity of human face pictures received from all channels is 5 million. If the quantity exceeds the upper limit, result of intelligent retrieval cannot be acquired.
Standalone version can support 500 point locations at most at present.
Present screen supporting 3,840*2,160 (4K) resolution at most.
This platform is not compatible with cameras in sky-eye series cameras at present.
MAC AIO only supports external microphones.
As for the equipment added in P2P account number way, audio sampling frequency shall be set to be 8kHz. Other sampling frequency may cause program failure on standalone version, so please use it cautiously.
As for the same NVR and IPC, video playback and video download exist at the same time. 5 channels at most are supported at present. Otherwise, download failure or equipment overload will be reminder in download process and video playback will fail.
MAC system authorizes standalone version, such as microphone authority. Restart the standalone version.
As for MAC version, the real-time preview in full screen cannot quit from full screen by pressing ESC (unless equipment list is closed).
Firewall of computer may influence some normal functions of standalone version. Please add white list or close firewall.
Software overview
1. Software usage

Easy7 Smart Client Express is an application based on MacOS and Windows operation system, which is specially used for managing, previewing and operating network monitoring equipment, suitable for all series of Tiandy NVR, IPC and other devices. The software can realize grouping management of watch points according to different scenarios and customize the group name. It can carry out real-time video browsing, audio preview, voice intercom and other operations based on the device.

It can control the equipment PTZ, set preset position and call. It can switch video playback between user-defined groups, support front-end and local video playback, control playback through time axis, and download video files to the client-side. The rich video monitoring business functions of the software are really suitable for the application of various video monitoring scenarios.

1. Software operation

Easy7 Smart Client Express Win64 V8.5.exe can install and operate individually and support Tiandy full series of hard disk video equipment and network video equipment.

3. System configuration

CPU: Intel(R) Core(TM) i5, the 8^th generation is recommended

Memory: 8G recommended

System: Support Windows 7 64-bit and Windows10 64-bit system

Software installation and

uninstallation

Software installation

Take the installation of “Easy7 Smart Client Express Win64 V8.5.exe” in Windows 10 64-bit system as an example, the installation of other versions is the same.

Find the installation file “Easy7 Smart Client Express Win64 V8.4.exe” in installation disk, as shown in the figure below:

P] Easy? Smart Client Express Win64 V8,5.exe

Figure 3.1.1

Double click and enter installation program, as shown in the figure below:

Figure 3.1.2

Select installation language, we take English as an example here,

select “English”, click “Next”. It will be installed on Disk C as shown in the

figure below:

Figure 3.1.3

If it’s necessary to change installation directory, click “Browse” to

select customized installation directory, as shown in the figure below:

Figure 3.1.4

5) Set installation directory, click “Install” to start installation program,

as shown in the figure below:

Figure 3.1.5

After installation, click “Finish” to complete installation, as shown

in the figure below:

Figure 3.1.6

Upgrade package installation

Temporarily not available.

Software uninstallation

Take the uninstallation of “Easy7 Smart Client Express Win64 V8.5.exe” in Windows 10 64-bit system as an example, the uninstallation of other versions is the same.

1) Select “Start”->”All program”->”Tiandy”->”Easy7 Smart Client

Express”->”Uninstall”, as shown in below figure:

V	Tiandy	jjjjj.pny
O	Easy? Smart Client Express
■	TortoiseSVN	Pin to Start
V		More	>
■	Video LAN	Uninstall

Figure 3.2.1

Click “Uninstall”, enter control panel, select “Program and feature” -> “Uninstall or change program”, then select “Easy7 Smart Client Express”, right key to select “Uninstall” or double click, there will display a pop-up for deletion, as shown in below figure:

Easy? Smart Client Express Uninstall

Are you sure you want to completely remove Easy? Smart Client Express and all of its components?

Yes

Figure 3.2.2

Click “Yes”, to uninstall the program will terminate all operating

Easy7 related programs and continue uninstallation progress, as shown in the figure below:

Figure 3.2.3

After uninstallation, there will display a pop-up for uninstallation

completion, click “Confirm” and the program is completely removed, as shown in the figure below:

Figure 3.2.4

Software login and framework setting
1. Software login

Double click the application icon

on the desktop to enter system

Initial password setting X

Tiandy

£ admin

Û Please enter password

Û Please enter the password again

Figure 4.1.1

Note: the password shall be a combination of digits and letters. (Password can be 6-32 characters)

After the initial password is set, enter the password protection setting page, as shown in following figure:

Figure 4.1.2

After the password protection question is set, you will enter the login page, as shown in following figure:

	Tiandy		X
	• a	admin
	Û	Please enter password
		□ Auto 1… □ Save p… Forgot th..
		Login
English	▼		Server settings

Figure 4.1.3

The information of related parameters in log-in interface is as follows:

Parameter	Description
Auto login	Tick and enable the check box. If the user name and

		password is correct, there’s no need to input user name and password anymore the next time, you may enter automatically. Cancel automatic login: System configuration -> Common Settings->Login Settings->Automatic Login Software.
Save password		Tick and enable the check box. If the user name and password is correct, the current password will be saved and it will automatically fill in the password for the next time.
Login		Click and enable it. If the user name and password is correct, you may log in the program.
Forget the password		Click enable and click to enter the password verification page. After the password security question is successfully verified, you can re-enter the initial password setting page to set the password.
	English ▼ English pyccKHÜ Im Ei Tieng viet Le français lingua italiana	Support shifting between multiple languages.
x		Click and enable it. Click to close Easy7 login interface.
Server settings		Stand-alone enabling. Enter database service port No.

interface through single click. Range of port No.: 1 -65531.

It will take effect after restarting the platform.

Table 4.1.1

1. Framework setting

Input correct user name and password, click “Login” to enter the main program interface of Easy7 Smart Client Express. The default grouping is

shown in below figure:

Figure 4.2.1

After entering the interface, click V/’ on the right upper corner of the interface to display version information and date, as shown in below figure:

About

Figure 4.2.2

The mouse slides over “®” on the right upper corner of the interface to display the current CPU occupancy and memory usage, as shown in below figure:

CPU 25.49% | RAM 5381.OOM

Figure 4.2.3

When connecting video, if CPU utilized rate exceeds 75%, it cannot connect to real-time video. As shown in following figure:

Figure 4.2.4

Click “Ö on the right corner of the interface to lock the interface. When correct delock password (i.e. login password) is input, the screen will be delocked, as shown in below figure:

Figure 4.2.5

Only accounts with “system lock-in authority” and “system unlocking authority” are able to carry out delock operation.

Click O’ cancellation button at the right upper angle of interface and a cancellation prompt box will pop out, as shown in the figure below. Click “OK” to exit from the present platform and return to login interface. Click “Cancel” or

^x at the right upper angle of prompt box to exit the current prompt box.

Figure 4.2.6

Click “^_” on the right corner of the interface to minimize the program; click “0/0″ on the right corner of interface to restore/maximize the program; click ” ^x” on the right corner of interface to quit the program.

In order ensure that users may not close the program by mistake in using process, when “^x” is clicked to quick the program, a notice will pop up to confirm whether to quit the program, as shown in below figure:

Figure 4.2.7

If “^x is clicked by mistake, click “Cancel” to return to previous operation interface; if you are sure to quit the system, click “OK” to quit.

The right upper corner of the interface will display current system time ” to facilitate user to check time at any time.

13:54:38

The navigation menu bar on the top of the interface can be separated from the main interface by dragging the menu, or the position can be exchanged by dragging.

Interface function items are divided into: common functions and basic functions. The module icons in basic and common function area can be dragged separately, and the user can choose the common function for convenience, as shown in below figure:

Tiandy Home page

Common functions

Basic functions

Playback

Search and play the recording file at the nonttonng point

TV Wai

TV wall configuratloo. preview, offline

User management

Device management

Add, modify and delete groups

„ Inlet and outlet management

Jr .’ Face management, human gate real-

Face recognition

, System configuration

Typca operation on client configuration

ElectronicMap

Management and operaton function

eTiandy Co.,Ltd Al Rights Reserved

Figure 4.2.8

Real-time preview: View the live images at the monitoring point.

Video playback: Search and play the recording file at the monitoring point.

Equipment management: General management of monitoring devices to facilitate addition.

System configuration: Typical operation on client configuration.

Alarm management: Real-time indication of unit alarm message to facilitate access to unit exception.

TV Wall: TV Wall configuration, preview, offline switch settings.

Inlet and outlet management: Face management, human gate realtime preview and information query.

ElectronicMap: Management and operation function of electronic map.

Face recognition: Management and distribution of face database.

User management: User password change allowed.

Operation logs: Check the system operations logs to understand the system operation.

Intelligent search: Intelligent analysis information from search, such as face retrieval, indoor electric vehicle testing and so on.

Data statistics: Total amount.

Alarm configuration:Coordinated configuration of various alarms.

[Note] After each login, the module icon will return to the default position, and the navigation menu bar position will be saved as the position when you quit last time.

Click ” ” on the left lower corner of the interface to display real-time

alarm information, as shown in below figure:

Figure 4.2.9

“Real-time alarm” records time, source, type, status, grade and other information of the alarm. When alarm information occurs, click “Play” to check alarm video playback, as shown in below figure:

Figure 4.2.10

Click “ ” to enter defense deployment/withdrawal management interface”, where all hosts can be controlled. The defense deployment/withdrawal status of channel and alarm is shown in the figure below:

Figure 4.2.11

Function operation instruction
1. Equipment management

Click the equipment management icon l j on home page to enter the equipment management interface.

- 1. Encode device management

Click “Device” to enter the device management interface. The device interface displays name, device type, IP address, port, video channel, connection status and other basic information of all added device, in which if the connection status is green, it means the device is on-line, and if it is red, it

means the device is offline; addition, modification, deletion and other operation

of the device can be conducted. As shown in below figure:

Figure 5.1.1.1

The information of related parameters in the interface is as follows:

Description

Parameter

Auto Search	Automatically search for devices under the same network segment, batch addition supported.
Add	Manually add encode device, support IP method, Standard domain name method, EasyDDNS method , P2P direct connection method, P2P account number method to add device.
Modify	Modify information of already added device.
Delete	Delete already added device, batch deletion of device supported.
Output	Select the device, and output the device information in three forms of Equipment List, Organization Chart, and Organization Relationship Table.
Import	Click the device, and input the information in Equipment List, Organization Chart, and Organization Relationship Table, which are contained in the file.
Invert Selection	Select all device that are not selected at that moment.
Refresh	Update the status of device at current interface.
Name	Display the name of all already added device.
Device Type	Display the device type of all already added device, TD series (Tiandy series) supported.
IP Address	Display the IP address of all already added device.

Port	Display the port of all already added device.
Video Channel	Display the maximum number of video channels allowed to play of all already added device.
Connection Status	Display the current connection status of all already added device. The reason will be displayed, if equipment login fails.
Operation	Click and enable it to open the web user-side interface of the device.

Table 5.1.1.1

- - 1. Auto search of encode device

Click ”

Q. Auto Search

to enter automatic search interface, as shown in below

figure:

Add Device					X
1	4-Add	C Refresh
□	Device Type	IP address	Port	Channel No.	Product number
□	IPC/PTZ	192.168.30.28	3000	1
□	IPC/PTZ	192.168.30.30	3000	1	EV-IP-2B20G1-M-28
□	IPC/PTZ	192.168.30.32	3000	1
[□	IPC/PTZ	192.168.30.37	3000	1
□	IPC/PTZ	192.168.30.41	3000	1
□	IPC/PTZ	192.168.30.42	3000	1
□	IPC/PTZ	192.168.30.43	3000	1
[□	IPC/PTZ	192.168.30.44	3000	1
□	IPC/PTZ	192.168.30.45	3000	1
□	NVR	192.168.30.49	3000	11

Figure 5.1.1.2

Tick and select one or more device in device column, click and a pop-up to add device will display, input the device’s user name and password (it’s recommended to set unified user name and password for severaldevice, if user name or password is wrong, the batch addition of partial device

will fail). If you select to import it into a group, the device will be automatically imported into the group, otherwise you need to manually add to a group, as shown in below figure:

OK Cancel

Figure 5.1.1.3

After addition, it will display the number of device successfully and

unsuccessfully added, as shown in below figure:

Click ”

O Refresh

Figure 5.1.1.4

to refresh the information of on-line device.

2. Encode device addition

Click

” to enter device addition interface, as shown in below

figure:

Add Device

Add Mode Standard domain name

Device Name

Device Type

DNS

Port

User Name

Password

Video Chan..

Alarm Input

Alarm Output

Add Cancel

0 Off-line Ad<

| Please enter device name

TD series ▼

I Please enter DNS

3000

admin

••••

I» 1

0 Import to Group

Add Device X

Add Mode EasyDDNS ▼

Device Name

Device Type

DNS

Port

DNS usern…

DNS passw…

User Name

Password

Video Chan…

Alarm Input

Alarm Output

Add Cancel

0 Off-line Ad<

Please enter device name

TD series

Please enter DNS

3000

Please enter DNS username

Please enter DNS password admin

I”

0 Import to Group

Add Device X

Add Cancel

Figure 5.1.1.5

Select device addition type and fill in corresponding device name, device ID, port, user name, password and video channel, and tick to select whether it’s offline device addition and whether needs to import a group according to requirement, the description of related parameter information is as follows:

Parameter	Description
Add Mode	Select different add type: IP type, Standard domain name type, EasyDDNS type , P2P direct connection

	type, P2P account number.type.
Off-line Add	Tick, then both on-line and offline device can be added. Not to tick, then only on-line device can be added.
Device Name	Add device name. ( There’s illegal character limit when adding device name, following characters are not allowed to be input ~!#$%^A()=[]{},”:;'<>?*’+/\& )
Device Type	Optional device type: TD series (Tiandy series).
Device IP	Add device IP.
DNS	Add device DNS.
Device ID	This information needs to be typed in when enabling the P2P direct connection adding model. Find [Device ID] via Device IE->Config.->System Config.->System Maintenance->System Upgrading->Version Info , or Device IE->Config.->Advanced Option->System Settings, then type in the digital characters.
DNS User name	It’s necessary to input this information when EasyDDNS type is selected.
DNS Password	It’s necessary to input this information when EasyDDNS type is selected.

Port	Add the communication port of device.
User Name	Add the login user name of device.
Password	Add the login password of device.
Video Channel	Add the total number of video channels the device has.
Import to Group	Tick, then the system will automatically add the device to Customized list and create a group (the same as device name).
Alarm Input	Number of alarm input ports of the device
Alarm Output	Number of alarm output ports of the device

Table 5.1.1.2

Upon correct information is input, the device will be connected, as shown in below figure:

Notice X

1 device has been added successfully!

Figure 5.1.1.6

3. Encode device modification

Tick and select the device to be modified, click

& Modify

to enter device

information modification interface, as shown in below figure:

Figure 5.1.1.7

Modification of add type, device name, device type, device IP, port, user name and password, video channel and other related information supported.

Click “Modify” to complete modification, as shown in below figure:

Figure 5.1.1.8

4. Encode device deletion

Select one or more devices to be deleted, click

□ Delete

to enter device

deletion interface, as shown in below figure:

Notice

Sure to want to delete the selected host?

OK Cancel

5. Encode device invert selection

, select

Select one or more devices not to be operated, click

all devices not selected at that moment, and conduct on selected devices.

6. Encode device refresh

Click ”

to refresh the information of all devices on current page.

Deciding device management

The operation is the same as 5.1.1 encode device management.

Gate equipment management

The operation is the same as 5.1.1 encode device management.

Note:

The device serial number is the factory number of the gate equipment, such asID060218100922201900889.
When connecting the Tiandy equipment, it should be noted that the port number is 80.
If the device is configured as Tiandy PAD, you need to enter PAD backend – > communication settings to configure the server address (this address is the IP address of the platform).

5.1.4. Grouping

Click “Group” to enter group management interface. Information of all devices and customized groups in current system will be displayed, as shown

in below figure:

Figure 5.1.2.1

The description of related parameters in this interface is as follows:

Parameter

Description

Set the channel name on the local device tree

0 Sync to device

synchronously to the front-end channel.

Get the front-end channel name of on-line channel in

O Get Device Name

Device list.

O Get alarm port

0 Modify Group

Obtain the alarm input and output information of IPC and NVR equipment.

Select a group in Customized list, click to modify the group name.

+ Add Group

Select the list needs to create sub-group in

Customized list, click to add a group.

Tick and select a Customized list group, click to delete the group and delete the sub-groups and channels in the group at the same time.

□ Delete Group

/I Import

t? Export

Tick and select the channel in left Device list, select a group in right Customized list, click to import the device to the customized device list.

Tick and select the channel in Customized list group, click to export that channel.

Quick search of channel name, input key information

and the channel name including that key information

	will be displayed in Device list and Customized list.
	Sync to device, move the mouse to Device list channel node, click synchronize the channel name to the frontend channel, as shown in below figure:
		□ C ■ My device □ ffi 192.168.15.191 Channel 1 0 C
o	Get the name, move the mouse to Device list channel node, click to get the front-end channel name of single channel, as shown in below figure:

( in Device list)

(in alarm list )

Modify channel name, move the mouse to Device list

channel node, click to modify the channel name, as

shown in below figure:

El H My device

□ H 192.168.15.191

Channel 1

Upon acquiring the alarming port information of the present equipment list channel, click to modify the name, No. and descriptions of alarming port, as shown

in the figure below:

□ ■ My device

□ S 192.168.30.72
■ “ 192.168.30.215

0 <•> 192.168.30.215-Channel 1

âb 192 168.30.215-Alarmln 1 £

192.168.30.215 192.168.30.215-AJan âb 192.168.30.215-AlarmO…

Add group, move the mouse to Customized list group, click to add the sub-group of the group, as shown in below figure:

	Modify watch point group, move the mouse to
	Customized list group, click to modify the name of the
( in Customized	watch point group, as shown in below figure:
list)	Delete group, move the mouse to Customized list group, click to delete the group, and delete the sub-
	groups and channels in the group at the same time,
n	as shown in below figure:

Table 5.1.2

The information in left Device list is the information of all added encode devices and their channels automatically generated by the system. The right Customized list is the group information customized by users themselves. To facilitate user’s management, users may add the encode device on the left to the Customized list on the right as necessary. For example, to add all channels of device 10.30.10.12 in Device list to the “Group Test” in customized group of Customized list, the operation steps are:

1) Tick and select all channels of 10.30.20.12 in Device list

10.30.10.12

1) Select the customized group to be added in Customized list

(highlighted when selected)

■ Group Test

Click ”

to add channels.

Similarly, select corresponding device channel in Customized list, click ”

t? Export

to delete the device channel from Customized list.

( Note:

Modules other than equipment management all load Customized list, users need to add used devices into Customized list. )

If the name of Channel 1 in device 10.30.10.21 in Device list needs to be modified, click ” —” and a pop-up for modifying device name will display (if the video has been encrypted, it can be decrypted here), as shown in below figure:

Figure 5.1.2.2

Relevant interface parameters are described as below:

Parameter	Description
Name	Modify the name of present channel.
Type	Support the selection of both channel and bayonet.
Connection mode	Support three connection modes of TCP, MCAST

	(RTSP) and MCAST (SRTP). In other words, the platform supports video playing in the form of MCAST (RTSP) and MCAST (SRTP) on the real-time preview interface.
Set password or not	An encrypted video password can be set after enabling. Decrypt video that has been encrypted here.

Table 5.1.3

If the alarm port 2 in device192.168.30.215 in Device list needs to be modified, click ” —” and a pop-up for modifying device name will display, as shown in below figure:

Figure 5.1.2.3

Relevant interface parameters are described as below:

Type of alarming port	Obtain the information about the present alarming port and support two types of ports, i.e., alarm input and alarm output.
Name of alarming port	Name of alarming port can be self-defined.
No. of alarming port	The No. of alarming port can be self-defined (ensure port No. cannot be repeated).
Host name	Obtain name of the present host automatically. Modify host name by Equipment-> Coding device -> Modify.
Host IP	Obtain the IP of the present host automatically
Descriptions of alarming port	Add information about the descriptions of alarming port based as required.

Parameters

Descriptions

Table 5.1.4

Similarly, select list group in Customized list, click ” —” and a pop-up for modifying watch point name will display, as shown in below figure:

Figure 5.1.2.4

Real-time preview

Click the real-time preview icon on the home page to enter real-time

preview interface. The main interface consists of Device list, video preview

window, View, PTZ control ,Senior and Target Information, as shown in below

figure:

Figure 5.2

Click “

to unfold or hide the view boxes at the left and right sides.

to unfold or hide the view boxes below.

Position the channel node quickly by clicking video window.

The equipment supports video preview and broadcasting by dragging it from group list to window.

5.2.1. Device list

Click “Device list” on the left to display all customized group list and input key information in search blank, double click to check device watch point, as

Figure 5.2.1

Right key menu of encode device customized group list

Click right key on the customized group list and the right key menu of customized group list will pop up, as shown in below figure:

Figure 5.2.1.1

The description of related parameters is as follows:

Parameter	Description
Turn off all videos	Turn off all videos connected at that moment.
Main code stream	All the videos in current list are added and played in

	main code stream mode (as for the channel being played, the playing code stream will not be changed)
Subcode stream	All the videos in current list are added and played in subcode stream mode (as for the channel being played, the playing code stream will not be changed)
Time calibration	Conduct time calibration on on-line devices in all group lists.
Manual alarm	Cancel the current alarm in the channel in video manually.

Table 5.2.1.1

2. Right key menu of encode device group list

Select a group in Device list and click right key, the right key menu of device group list will pop up, as shown in below figure:

Figure 5.2.1.2

The description of related parameters is as follows:

Parameter	Description
Turn off all videos	Turn off all videos connected at that moment.
Turn off this video	Turn off all videos connected in current group.
Added to the list of switch groups	Add selected encode device to automatic switch group list.
Main code stream	All the videos in current list are added and played in main code stream mode (as for the channel being played, the playing code stream will not be changed)
Subcode stream	All the videos in current list are added and played in subcode stream mode (as for the channel being played, the playing code stream will not be changed)
Time calibration	Conduct time calibration on on-line devices in selected group lists.
Manual alarm	Cancel the current alarm in the channel in video manually.

Table 5.2.1.2

3. Right key menu of encode device list

Select a channel watch point of a device in device list group, click right key, the right menu of device list will pop up, as shown in below figure:

Figure 5.2.1.3

The description of related parameters is as follows:

Parameter	Description
Login to the affiliated host computer	Right click the encode device channel to restore the connection between the device host computer of the channel and Easy7 platform. For example, select Channel 1 in [Device List] in above figure (the affiliated host computer is 192.168.15.191), right click “Login to the affiliated host computer”, the connection status of the host computer 192.168.15.191 is on-line, as shown in below figure:

Right click the encode device channel to disconnect the connection between the device host computer of the channel and Easy7 platform. For example, select Channel 1 in [New Group] in above figure (the affiliated host computer is 192.168.15.149), right click “Log off the

affiliated host computer”, the connection status of the host

Log off the
affiliated host
computer

computer 192.168.15.149 is offline, as shown in below

figure:

	Name	Device Type	IP address	Port	Video Channel	Connection status		EJ ■ ■ Device List
	192.168.15.191	TD series	192.168.15.191	3000	1	Off line	J	□ ■ 192.168.15.191 n z i
□	192.168.15.213	TD series	192.168.15.213	3000	1	On-line		Channel 1
	192.168.15.149	TD series	192.168.15.149	3000	1	On-line		□ ■ 192.168.15.213 EJ[ ■ 192.168.15.149
	192.168.15.144	TD series	192.168.15.144	3000	1	On-line		E 9 Channel 1
	192.168.15.148	TD series	192.168.15.148	3000	1	On-line		E fc 192.168.15.144
□	192.168.15.139	TD series	192.168.15.139	3000	2	On-line		□ ■ 192.168.15.148 g
	192.168.15.184	TD series	192.168.15.184	3000	20	On-line		□ ■ 192.168.15.139 1
	192.168.15.52	TD series	192.168.15.52	3000	2	On-line		■ 192.168.15.184 ■ 192.168.15.52
	192.168.15.188	TD series	192.168.15.188	3000	2	On-line		□ ■ 192.168.15.188
□	192.168.15.197	TD series	192.168.15.197	3000	1	On-line		□ ■ 192.168.15.197

Turn off all

Turn off all videos connected at that moment.

videos

Main code	In the channel of login encode device, click this button to
stream	connect the main code stream video of the channel.

Subcode stream	In the channel of login encode device, click this button to connect the subcode stream video of the channel.
Video interruption	In the channel connected to video, click this button to disconnect the video of the channel.
Start intercom	In the channel of login encode device, click this button to talk to the video source of the channel. Click this button in the channel of DVR/NVR device, the intercom box “Talking to XXXX” will pop up to start talking with DVR/NVR; click this button in the channel of IPC device, the intercom box “Talking to XXX” will pop up to start talking with IPC device.
Stop intercom	In the channel of login encode device, click this button to stop the intercom with video source of the channel.
Time calibration	To conduct time calibration on this on-line device.
Change channel name	Change the name of currently selected channel.
Manual alarm	Cancel the current alarm in the channel in video manually.

Table 5.2.1.3

Choose one alarming input port in group in the equipment list, click the right key and the right key menu of equipment list will pop out, as shown in the figure below:

Ş 192.168.30.2′

192.168.““ “

Clear alarm

192.168.^.^
192.168.30.2′

Figure 5.2.1.4

Relevant parameters are described as below:

Parameter	Description
Manual alarm	If the equipment alarm inputs alarm, click “Manual
cancellation	alarm cancellation” to clear the alarm in process.

Table 5.2.1.4

Choose one alarming output port in group in the equipment list, click the right key and the right key menu of equipment list will pop out, as shown in the figure below:

Figure 5.2.1.5

Relevant parameters are described as below:

Parameter	Description
Open/close alarm	Control the on/off status of alarm output port.

output

Table 5.2.1.5

Video preview window

In video preview window, the video will be displayed in the middle, capture menu, video menu and sound menu are in the left lower part, menus can realize its function respectively. Double click video window to maximize it and double click it again to restore, as shown in below figure:

Figure 5.2.2.1

During the video preview, the split screen window will self-adapt to the video according to the number of linked videos, and it supports the real-time video playing of devices added in various ways.

The target bar in the below will display human face information, age, sex, whether or not wearing a mask, whether or not wearing glasses and physical temperature, etc.

The target bar in the right will display the comparison similarity result with the human face database, and the strangers’ face will not be displayed.

When previewing video, the target bar on the right side can display the real-time detected face information.

When previewing video, the status bar at bottom left (in dark color) may display current channel is connecting respectively, audio preview, capture function, instant playback and channel video recording are supported. The channel name will be displayed at bottom right, when the alert is turned on, the right upper corner of the video window will display the alert icon and not to

display it when the alert is turned off, as shown in below figure:

Figure 5.2.2.2

Toolbar in video preview interface

The description of icons in toolbar in video preview interface is as follows:

Icon
	Capture all, to capture windows of all connected

	videos at current screen.
ilil	Start all recording, record windows of all connected videos at current screen.
fc	Intercom list, display current intercom status.
	Save view, users click to save current view information.
S	Rotating display plan, allow users to set their own switch mode, so that Easy7 can automatically switch video channels on [Real-time preview] interface for users’ convenient browse.
El	Start rotating display, automatically switch video channels to preview according to rotating display plan.
	Group switching list, click this button to display group switching list. There will have devices in the list only when right click the device group in customized device list of device list on the left to select and add devices to [Add to group switching list].
\|jF\|j	Last group, which supports the manual switch group to switch the last screen of group.
[5~j]	Start/Stop group switching, open video window, click this button to conduct group switching; click again to

	stop group switching.
	Next group, which supports the manual switch group to switch the next screen of group.
o	Set number of video views, click and the setting menu of displayer will pop up.
m	Full screen, click to display video window at full screen. Click ESC button or right click the video to cancel full-screen display to escape from full-screen model.
Gb	Indicate that the video connecting status is direct connection
e	Turn off the video, i.e. disconnect the connection of present video.
*»/♦	Turn on audio / Turn off audio
	Screen capture, capture the picture of the present video_o
!&	Turn on tape recording / turn off tape recording
	Instant replay, which supports timely view of present playback based on demands. The time of instant replay can be modified according to System settings -> Video-related -> Time of instant playback.

Return to preview to exit the page of instant playback.

Table 5.1.2.1

2. Right key menu of video preview window

Right click video preview window and the right key menu of video preview window will pop up, as shown in below figure:

Turn off the video

Audio pre-view

Snap shot

Adjust the video’s aspect ratio

control

Switching of main code and subcode streams

16:9

Video parameter

16:10

9:16

Time calibration

Change channel name

Full screen

Clear alarm

✓ Defence

Figure 5.2.2.3

The description of related parameters is as follows:

Parameter	Description
Turn off the video	Click on the single video window of connected video to turn off the video in the window.
Audio pre-view	Click on the single video window of connected video to listen to the audio of video channel in the window.

Snap shot	Click on the single video window of connected video to take snap shot of the window.
Adjust the video’s aspect ratio	Adjust the video’s aspect ratio, filled, 4:3, 16:9, 16:10 and 9: 16 supported.
Control	Electronic amplification and fast ball 3D control are available.
Electronic amplification	After enabling the electronic amplification function, press and hold left button of mouse and move the mouse in video & image area to choose the area you want to amplify (roll the pulley of mouse to amplify the image in the area chosen).
Fast ball 3D control	By clicking mouse, the scenes monitored are adjusted to video center. In detail: Click the left button on the point of monitored video and the point will move to center of the video. Press and hold the left button and move the mouse downward and rightward to choose a rectangular area. The center of the rectangular

		area chosen will move to the center of the video and amplify. 3. Press and hold the left button and move the mouse upward and leftward to choose a rectangular area. The center of the rectangular area chosen will move to the center of the video and shrinks.
Switching of main code and subcode streams		Auto switch between main code and subcode streams. Support simultaneous switch among native video.
Video parameter		Set the display parameter of currently selected video: brightness, contrast, saturation and Hue.
	Video parameter X ⁵⁰ * Brightness • 50 □ Contrast * 50 Q Saturation ® 50 • Hue • /♦Restore Default	Modify video parameters of selected video, restore default supported.
Time calibration		Conduct time calibration on the on-line device.
Change channel name		Change the name of currently selected channel.
Full screen		Display video view window at full screen.
Manual alarm		Cancel the current alarm in the channel in video manually.
Defense		Support one-key defense

deployment/withdrawal function.

Table 5.2.2.2

3. Rotating display plan

The main function of rotating display plan is to allow users to set their own switch mode, so that Easy7 can automatically switch video channels on [Live

View] interface for users’ convenient browse. Notice: A Liveview window supports up to 64 Cameras previews.

Add view:

After configuring the split screen scheme and the video played, click

” in preview interface toolbar to save view, as shown in below figure:

Figure 5.2.2.4

Add rotating display plan:

Click view bar on the left and select the view to be added, right click “Add to the regular rotating switch program”, as shown in below figure:

Device List

View

test-face

Name change

Added to the regular rotating switch program

Delete

Figure 5.2.2.5

Set rotating display plan: in preview interface toolbar in bottom right to enter to List of

Click

view rotating display plan interface, as shown in below figure:

Figure 5.2.2.6

(1) Change the rotating display intervals: tick and select the view to

be modified, click ”

0 Modify

too change the rotating display interval (the

range of interval value is 30~3600s), as shown in below figure:

Figure 5.2.2.7

(2) Delete: tick and select the view to be deleted, click

n Delete

delete the view, as shown in below figure:

Figure 5.2.2.8

(3) Move upwards/Move down: tick and select the view to be moved,

click ”

/I Move upward

t/ Move down

” to adjust the view play order.

Turn on/Turn off rotating display plan:

Click ” ^{3 k}” in preview interface toolbar on bottom right to turn on rotating display plan, click again to turn off rotating display plan.

4. Group switching setting
Add group switching:

Right click a group in “Device list” on the left, click “Add to group switching list” to add group switching, the pop-up notice box is shown as follows:

Notice X

Succeeded to add to view cruise plan.

Figure 5.2.2.9

Set group switching:

Click

in preview interface toolbar on bottom right to set interval and

group split screen number of group switching, as shown in below figure:

Figure 5.2.2.10

(1) Set group switching interval: set group switching interval in upper part of the interface, the range of interval value is 30~3600s.

(2) Set split screen number, -x- screen (not to change split

screen number and keep original split screen number), 1×1 screen and 2×2 screen supported. Two methods can be adopted

to change split screen number, explained as follows:

©Click ”

0 Modify

to enter Set Split Screen Number

interface;

©Double click the split screen number in Group Split

Screen to set enter Set Split Screen Number interface, as shown in below figure:

Figure 5.2.2.11

Turn on/Turn off group switching:

Click “^^” on preview interface toolbar on bottom right to turn on group switching, click again to turn off group switching.

5.2.2. 5. Target Information

Under and in the right of real-time preview interface, display information of identified persons and the comparison human face database, as is shown in below figure:

Real-Time

Youth

Male

No mask

Wearing glasses

192.16 8.16.22.1-Channel 1

2020-11 -23 10:24:29

Figure5.2.2.12

The target information can identify the person’s age, sex, whether or not wearing a mask, whether or not wearing glasses, detected physical temperature and detection time in real time. At the same time, it can also identify whether the person matches in the human face database. If yes, it can be compared with the pictures uploaded in the database, and the similarity, the name of the person and the detection time will be displayed, otherwise stranger alarm will be on.

If previous record needs to be checked, shift to “History” to check history information.

5.2.3. View

View list shows currently saved view tag, double click to preview the information of this view. Right click this list view node and a menu will pop up, as shown in below figure:

Name change

Added to the regular rotating switch program

Delete

Figure 5.2.3

The description of related parameters is as follows:

Parameter	Description
Name change	Click to change view name.
Add to the regular	Click to add the view to the regular rotating switch plan
rotating switch plan	list.
Delete	Click to delete this view information node from view list.

Table 5.2.3

5.2.4. PTZ control

PTZ control may control PTZ speed, preset, etc., as shown in below figure:

Figure 5.2.4

The description of icons on PTZ control interface is as follows:

Description

Icon

	8-direction key, press corresponding direction key to control PTZ to rotate in the direction accordingly; the center button is scan shortcut key.
	Zoom control button, press “Q” to control the device to perform zoom-out operation, the field of view angle becomes larger and the scene becomes smaller; press “^,ja” control device to perform zoom-in operation, the field of view angle becomes smaller and the scene becomes larger.
•/	Focus control button, press “^ ” to control the device to perform focusing-in operation, the near scene is clear and the far scene is fuzzy; press ” “ ” to control the device to perform focusing-out operation, the far scene is clear and the near scene is fuzzy.
	Aperture control button, press ‘©” to control the device to perform aperture reduction operation, press “A^:” to control device to perform aperture enlargement operation.
	The slider can adjust the rotation speed of the
■Speed ♦ 1

	device.
	Set the preset number for calling.
	Call the preset. Select saved preset, click to call and the screen will jump to the preset part.
EJ	Set the preset. Select the preset number to be saved, adjust the screen to the preset to be saved, click Set to save this position.

Table 5.2.4

5.2.5. Senior

Senior may set the light, power and wiper, as shown in below figure:

Advanced Function

Figure 5.1.5

The description of related parameters is as follows:

Parameter

Description

Light

Open

Close j

Open/close light.

Power

Open

j Close j

Open/close power.

Open wiper.

Table 5.2.5

5. 3. Video playback

Click the video playback icon

on home page to enter video playback

interface, query of video recording and time-based video downloading are

supported, as shown in below figure:

Figure 5.3

5.3.1. Video query

In video playback interface, click Watch point on the left, set range of time

for query, if more precise query is required, click

▼ More

to set storage type,

stream type and other screening conditions for query, then click

a More

again

to hide detailed screening condition, as shown in below figure:

Monitoring point

Figure 5.3.1.2

El ■ fa Device List

El !■ fa 10.30.10.80

El \Z fa 10.30.10.5

El I fa 192.168.15.184

El □ fa 192.168.1.31

El 0 fa 192.168.16.221

□ fa 192.168.16.222

El I fa 192.168.1.80

Query

Time Range

2020-11-28 00:00:00

2020-11-28 23:59:59

▼ More

Storage location

Remote storage

Stream type

Mainstream

El Query

(5 Time-based download

Query results j

Figure 5.3.1.1

Select range of time, select the start time on the start calendar of the time range and the end time on the calendar for the end time.

When front-end storage is selected in storage type, following stream types can be selected, both main code stream and subcode stream supported.

When conditions are selected, click Query to display query result notice box, as shown in below figure:

Click

Query results

below to check current query results, the

expanded interface is shown in below figure:

Figure 5.3.1.3

At this time, the query results will be displayed on the progress bar, and users can playback by clicking the time point on the progress bar

Note: The front-end storage video supports synchronous playback (four- channel synchronous playback supports at most).

Video playback

Play mode 1: for queried videos, double click one video file to realize playback of the file.

Play mode 2: select a playback window, click ► of playback control to realize video playback on time axis related to selected window.

Play mode 3: select a playback window, directly click the time point in time axis to play back from that time point.

5.3.2.I. Playback control

The playback control menu is shown as follows:

Figure 5.3.2.1

The description of icons on playback control interface is as follows:

Icon	Description
	On/off synchronous playback; asynchronous playback is set by default. Click to enter synchronous playback mode and click again to exit it. Note: Synchronous playback not supported for local video.
	Slow forward button, click to make the video file play slowly. Note: as for the equipment added by P2P direct connection, click the “slow play” button to slow from 4x to 2x and from 2x to 1x. 1x speed is the slowest. 1/2 speed is not supported.
	Fast forward button, click to make the video file play quickly. Note: the equipment added by P2P direct connection supports 4X speed playing at most.

► / II	Play/Pause button, click to control the start/pause of video file.
N	Step forward button, click to make the video file play frame by frame.
	Stop button, click to stop the playback of current video file.
Ut*)	Capturing button. Click it to capture the video file that is selected and being played.
&	Video clip button: click it to start video clip and click it again to finish that. The time axis of clipped section will become red and the target section will be saved. The format of video saved can be modified by setting “system settings -> video -> download video format”; three formats sdv ,mp4, and avi are available.
o	Set screen number button, click to pop up the menu of playback window split screen.
	1×1 screen playback supported, click and the video playback window will display in single screen.
	1×2 screen playback supported, click and the video playback window will display in two split screens.
	1×3 screen playback supported, click and the video

		playback window will display in three split screens.
		2×2 screen playback supported, click and the video playback window will display in four split screens.
		3×3 screen playback supported, click and the video playback window will display in nine split screens.
■■■■ ■■■■		4×4 screen playback supported, click and the video playback window will display in sixteen split screens.
M		Full screen display button, click to display the playback window in full screen. Click ESC or right click to cancel full screen display to turn off full screen display.
		Volume adjustment bar, drag to adjust the sound of video playback. Click on the horn to turn sound on/off.
□/□		Used to adjust the accuracy of time axis.
	Window 1	Display the current control window number.
		Video type filter button, click to filter the video time axis type, and the time axis of unselected video type will not be displayed. The filter of all types, alarm recording, timing recording and manual recording is supported.

Table 5.3.2.1

2. Right key menu of playback window

In video playback window, right click, and the right key menu of playback window will pop up, as shown in below figure:

Stop playback

Snap shot

Change channel name

Full screen

Electronic zoom

Figure 5.3.2.2

The description of related parameter is as follows:

Parameter	Description
Stop playback	Click to stop the playback of current video.
Snap shot	Click to snap shot of selected playback window.
Change channel name	Click to change channel name of selected playback window.
Full screen	Click to display the playback window at full screen. Click again to turn off full screen display.
Electronic zoom	Click the left button of mouse to choose and zoom in the area.

Table 5.3.2.2

Video downloading

The downloading is divided into two modes: by file and by time segment.

5.3.3.I. Download by file

Batch downloading:

In video playback interface, click query result to check query result interface, tick and select several video files and right click, click “^J” to conduct

batch downloading, as shown in below figure:

Figure 5.3.3.1

Click ” ” to enter export progress list interface to check the progress of

file downloading, as shown in below figure:

Figure 5.3.3.2

Stop export:

In export progress list, select the file needs to stop export, right click this

file, select

Stop Export

to stop downloading the file, as shown in below figure:

Figure 5.3.3.3

ReExport:

In export progress list, select the file needs to re-export, right click this file,

select ”

ReExport

to export this file again to download.

Clean record:

In export progress list, right click a file, select

Clean Record

to delete all

downloaded records.

Clean all: downloaded records in the list.

In export progress list, right click a file, select

Clean All

to delete all

( Note: When downloading front-end storage video files, only one record file can be downloaded at the same time. )

5.3.3. 2. By time segment

The video on the front-end storage supports downloading by time segment.

Select the channel you want to download (either through the drop-down menu or by clicking the channel in the tree list), select the time segment youwant to download, and then click ”

Recent browsing

Q Time-based download

Record the latest video and click to preview it , as shown in below figure:

Recent browsing

192.168.16.221-Channel 1 2020-11-28 00:00:00

Figure 5.3.4

5.4. System Configuration

Click the system configuration icon I J on home page to enter system settings interface.

Common settings

@ © I e (!) – □ x 16:12:10

Figure 5.4.1.1

admin

The description of related parameters in the interface is as follows:

Parameter		Description
Login Settings	Automatic Login Software	Tick and select, after fill in correct [User name] and [Password] by users, Easy7 will realize automatic software login function when the operation system starts.
Path Setting	Save path of capture photo	The save path of capture, preview and playback photo.
Path Setting	Video Download Save Path	The save path of video download.
System	Language	Set the language of software system, effective after restart.
System	Skin	Set the skin of software system, effective after restart.
Data backup	Data backup path	Back up, recover, clean up and reindex software database backup files.
Data backup	Configuration	Import/export relevant configuration information with one key, such as equipment list, user authority and

		electronic map.
Log Settings	Period of keeping operation log	Set the save time of each operation log.
Log Settings	Period of keeping alarm log	Set the save time of each alarm log.
Restore Default		Restore the configuration of current page to the configuration information when initially installed.

Table 5.4.1

Video Settings

Tiandy	Home page	configuration
ijt Common Settings
Qi Video Settings	■\| □ Automatically restore the stat.
A Alarm grade
	Switch between Main and Su…	(•) Automatic O Manual
ft Storage management
4b Intelligent application	Automatic Switching Screen…
4b Intelligent application		▼
i3i P2P setting	Manual Default Connection	Substream		1
	Play property setting	Good fluency		\| * Take effect after replaying video
	Decoding mode setting	Software decode		\| ‘Take effect after reboot
	Video download format	SDV format	—	1
	Preview frame rate	tilde	—	* Take effect after replaying video

Figure 5.4.2

The description of related parameters in the interface is as follows:

Description

Parameter

Automatically restore the state last time you exit from the system	The video connected to video preview, when turns on the software again, the video before turn-off will restore connection.
Switch between Main and Sub Streams, Automatic Switching Screen Number	Set switching screen number, when the number of windows displayed in the client-side video browsing interface is greater than the number of split screens, the connected channel video will default to the subcode stream.
Manual Default Connection	Set the code stream type of default play.
Play property setting	Available to set Good fluency/Minimum delay. Take effect after replaying video.
Decoding mode setting	Software decode and hardware decoding are supported, effective after restart. Take effect after reboot.
Video download format	The download recording may set SDV (private format) ,MP4 (general format) and AVI format.
Preview frame rate	Show or conceal frame rate on preview screen. Take effect after accessing video again.

Table 5.4.2

5.4.3. Alarm grade

Figure 5.4.3

Drag the alarm type label to other grades to set the type to a new grade.

Alarm grade is used for alarm record filter.

Storage management

Tiandy	Home page Device management		System configuration		a û	– □ X 16:14:01
Common Settings
	Continuous record!…	30
Q Video Settings
A Alarm grade	Record format	sdv
fl Storage management
	Type of recor. ..	Mainstream	71
Intelligent application			I
ÖI P2P setting	Min. disk space	® By percentag	… O By space
		10	%
	Disk Tull	® Delete data^	Stop storing data
	storage local…	Location	Total size (G) railable space f¹;	Available space (G)
	Store face snapshots and I…	*□ C’J*	150 46.5	70
		DJ	261 38.5	100
		□ E7	260 7.8	20
			260 80.5	209
			Restore Default	Save
A		©Tiandy Co.,Ltd All Rights Reserved				admin

Figure 5.4.4

The description of related parameters in the interface is as follows:

Parameter	Description
Continuous recording time (min)	Set the time of continuous recording (recording packaging), the time range is 5~120 min.
Record format	SDV format , mp4 format and AVI format are supported for recording storage.
Type of record streaming	Main code stream and minor stream supported.
Min. disk space	Supported to set by percentage (%) or by space (G), fill in corresponding parameter in the text box below.
Disk full	Supported to select and delete the earliest local recording or stop recording.
Storage location	Set the storage location of files.

Table 5.4.3

Intelligence application

Figure 5.4.5

After ticking “enable intelligent applications”, pictures of human face and man lock can be received. The picture snapshot reserve time can be defined for actual need.

After checking deletion strategy, the strategy can be executed after the upper limit of the stored guest flow duration (6-24 months be supported to choose from) is reached.

5.4.6. P2P setting

Tiandy

Home page

System configuration

Common Settings

Q Video Settings

A Alarm grade

a Storage management

ft Intelligent application

©P2P setting

Figure 5.4.6

Parameter	Description
Region	The place of P2P equipment configuration
User name	Enter the user name of P2P mobile phone client side
Password	Enter the password of P2P mobile phone client side
Log in	Enter correct user name and password to log in successfully.
Save	Click “save” to save the current configuration. That

The description of related parameters in the interface is as follows:

takes effect after restarting the program.

Table 5.4.6

5. 5. Alarm management

Click the alarm management icon

on home page to enter alarm

management interface.

Real-time alarm

Real-time alarm list displays the alarm received after this login. The list will be refreshed automatically, time of alarm, source of alarm, type of alarm, alarm grade and other alarm information will be displayed, as shown in below figure:

® a l a – □ Tiandy Homepage Alarm management Real-time alarm History alarm
	*cnee C)>) Finer level** j Select all £ Grade 1 • 0 Grade 2 • £ Grade 3*0 Grade 4 • Grade 5 •

	Time of alarm Source of alarm Alarm Type Alarm status Preview Alarm grade
A	2021-11-2511:17:35 192.168.23.53-Channei 1 Video motion alarm Alarm Play 5Grade • 2021-11-25 11:17:33 192 168 23 53-cnannet 1 Video motion alarm Alarm removal 5Grade • 2021-11-2511:17:22 192 168 23 53-Channei 1 Video motion alarm Alarm Play 5Grade • 2021-11-2511:17:04 192.168.23.53-Channet 1 Video motion alarm Alarm removal 5Grade • 2021-11-2511:16:36 192.168.23.53-criannet 1 Video motion alarm Alarm Play SGrade • 2021-11-25 11:16:33 192 168 23 53-cnanriet 1 Video motion alarm Alarm removal 5Grade ■ 2021-11-2511:16:13 192 168 23 53-Ctiannet 1 Video motion alarm Alarm Play 5Graae • 2021-11-2511:16:11 192.168.23.53-Channei 1 Video motion alarm Alarm removal 5Grade • 2021-11-2511:16:00 192168 23 53-cnannei 1 video motion alarm Alarm Play 5Grade • 2021-11-2511:15:29 192168.23 53-Channei 1 Video motion alarm Alarm removal 5Grade • 2021-11-2511:15:19 192168 23 53 Channel 1 Video motion alarm Alarm Play 5Grade • 2021-11-2511:15:09 192168 23 53-Channet 1 Video motion alarm Alarm removal SGrade • 2021-11-2511:12:52 192.168-23.53-Ctiannet 1 Video motion alarm Alarm Play 5Graae • 2021-11-2511:12:47 192168 23 53-Channet 1 Video motion alarm Alarm removal 5Grade ■ HI 0-33 1Ü5 1Î ‘1 (“hanrö 1 Vvtan mntirm alarm Ham mrwu ■ CTianoy Co .Ud Ail Rights Reserved ³

Figure 5.5.1

The description of related parameters in the interface is as follow:

Parameter	Description
Check	Tick and select alarm records need to be checked, click to fill in handling suggestion, the checked alarm

	records will be removed from real-time alarm, the handing suggestion and checking status will update to the history alarm record of corresponding alarm record.
Audio	Click to turn on/off alarm audio.
Play	Click to play the video 10s before and after the time of alarm, if there’s no video, real-time preview will be displayed.
Filter level	Tick and select filter level, the selected level will be displayed in the list, nothing will be displayed if on level selected.

Table 5.5.1

5.5.2. History alarm

History alarm list displays all alarms, including checked and unchecked alarms, as shown in below figure:

Tiandy

Home page

Alarm management

8 | 0 – O X 11:17:56

Real-time alarm

i History alarm

Starling time

2021-11-25 00 00 00

Endtime 2021-11-2523 50 59 E

Source ol alarm

Alarm Type

• status check *•

> User check .

«II

’ 1

Query

Reset

Check

Output

Fitter level g

Select all

v Gradel

•/ Grade 2 • -■ Grade 3

• g Grade 4 • s Grade 5 •

Tame of alarm

Source of alarm

Alarm Type

Alarm status

Preview

Alarm grade

Status check

User check

Time chec

2021-11-25 1117:35

192 1662353-Chanoel 1

Video motion alarm

Alarm

Play

5Grade

Moi confirmed

2021-11-2511:17:33

192.166.23.53-Ctiarwiel 1

Video motion alarm

Alarm removal

5Grade

Not confirmed

2021-11-25 11:17:22

192.168.23.53-Cnantiel 1

video motion alarm

Alarm

Play

5Grade

Hot confirmed

2021-11-25 11 17:04

192 168 23.53-Ctiannel 1

Video motion alarm

Alarm removal

5Grade

Not confirmed

2021-11-2511 16:36

192.168.23.53-criarmei 1

Video motion alarm

Alarm

Play

5Crade

Not confirmed

2021-11-2511:16:33

192 1662353-Cnanoel 1

Video motion alarm

Alarm removal

5Grade

Not confirmed

2021-11-2511:16:13

192.166.23.53-CtiarMiel 1

Video motion alarm

Alarm

Play

&Grade

Not confirmed

2021-11-25 11 16:11

1921682353-cnanoeı i

Video motion alarm

Alarm removal

5Grade

Not confirmed

2021-11-251116:00

192 1662353-Ctiarwel 1

Video motion alarm

Alarm

Play

SGrade

Not confirmed

TotaH 40Piece ToialSPage »ıtemsıpage ▼ < 1

> To 1

Page

C Tiandy Co .Ltd Ail Rights Reserved

admin

Figure 5.5.2

The description of related parameters in the interface is as follows:

Parameter	Description
Starting time	Available to set the starting time of history alarm query.
End time	Available to set the end time of history alarm query.
Source of alarm	Available to set the source of alarm of history alarm query, search by key word supported.
Status check	Available to set the checking status of history alarm query, including all, unchecked and checked.
User check	Available to set the checking user of history alarm query
Query	Click to search history alarm information conforms to search condition.
Reset	Click to restore to default query condition.
Check	Tick and select alarm records need to be checked, click to fill in handling suggestion. Update verification status, verify users, verify real-time, and process comments after verification.
Output	Click to output query results to local device.
Filter level	Tick and select filter level, the selected level will be displayed in the list, nothing will be displayed if on

	level selected.
Play	Click to play the video 10s before and after the time of alarm, if there’s no video, real-time preview will be displayed.

Table 5.5.2

5.6. TV Wall

Click the TV wall icon

on homepage to enter TV wall configuration

interface. There are functions of TV wall configuration, TV wall management

and off-line switch settings as shown below.

Figure 5.6

TV wall

TV wall interface is mainly used for configuring TV wall video display.

TV Wall Video Configuration

Choose TV wall name on TV wall page to show the current TV wall layout.

Choose a screen that needs video equipment. Choose the video equipment to be added in the left equipment list. One equipment can be added for only one

time.

Figure 5.6.1.1

The relevant icons and parameters on the interface are described below:

Parameter	Description
Local preview	After starting preview, videos can be previewed on current TV wall interface.
(M)	Set the quantity of screens. 1 screen, 4 screens, 6

	screens, 8 screens, 9 screens, 16 screens, 25 screens and 36 screens can be supported for every decoding output channel. Choose decoding output channel and click screen quantity to set the upper limit of screens of the decoding output channel.
\| tg]]	Click the button to show switch group list. Click the right button to define the equipment group in equipment list on the left, choose [Add to switch group list] to add equipment in the list.
	Last group, which supports the manual switch group to switch the last screen of group.
[oil	Start / stop group switch: open video window, click the button to switch group; click it again to stop the group switch.
fr]j	Next group, which supports the manual switch group to switch the next screen of group.
B	Save the view: click to save the current view information.
@1	View browse plan: users can set suitable switch way and Easy7 can switch video channel automatically on page [Real-time preview], which is convenient for users’ browse.

	Start view browse and switch video channel automatically for preview according to the view browse plan.
	Start all off-line switch, click to enable and start to watch decoding video of all output channels on decoder.
fi fp	Stop all off-line switch, click to enable and start to stop all decoded videos.

Table 5.6.1.1

If splicing function of equipment is started, click the splicing screen with the right button as shown below.

Picture setting of splicing unit

Create display area

Create all display areas

Close all display areas

All windows zoom to a single screen

Save screen scheme

Application screen scheme

Restart the host

Figure 5.6.1.2

The relevant icons and parameters on the interface are described below:

Parameter	Description
Picture setting of	The quantity of screens set by splicing unit can be

spicing unit	defined by user.
			User-defined X Number of rows Number of columns OK

Create display area	Choose the screen in splicing unit, click the right button to create display area.
Create all display areas	Click the right button to display the screen areas in all splicing units.
Close all display areas	Click the right button to close the screen areas in all splicing units.
All windows zoom to a single screen	Click the right button to shrink the maximized screen to the original.
Save screen scheme	Click the right button to save the display plan of screens in current all splicing units.
		Save screen scheme X Project name Save

Application screen scheme	Click the right button to apply existing screen plan to current splicing unit.

Restart the host Restart the current decoder.

Table 5.6.1.2

The display area created by clicking the right button is shown below.

Figure 5.6.1.3

The relevant icons and parameters on the interface are described below:

Parameter	Description
Turn off the video	Close the video preview on current splicing screen.
Audio pre-view	Preview the audio effect of current splicing screen.

Decoder audio preview	Display audio on decoder.
Decoder offline switch	It is permitted to set video switching of current splicing screen window.
		X ÇL Offline swtcri setup nitiate offline switch Slop offline «.wile E . Device Lisi Switch para… H Bt 182.1S8.2154 Id . h 102.168.23.55 Stream type Mainstream ’ Switching fl_ 30 Set Display mode ’ Move upward Move down Channel Name Length ol stay (seconds) Stream type 192 168 23 541 30 Mainstream 192 168 23 53 1 30 Mainstream

Switching of main code and subcode streams	Video preview effect can be switched between main code stream and subcode stream
Video parameter	The brightness, contrast ratio, saturability and chroma of video can be modified.
		Video parameter X -A’- _ ” Brightnesi O Contrast Ö Saturatior ⁼ Hue /^Restore Default
Close the display area	Close current display area of splicing screen
All windows shrink to a single screen	Shrink all screens to single splicing screens

Set to top / bottom	Choose the screens in splicing unit, click them to set to top layer / bottom layer.
Other operations of splicing screens	As for every splicing screen, create / close display area, shrink to the screen, maximize all screens etc.; screen scheme can be saved and applied.
Create all display areas	Click the right button to display the screen area in all splicing units
Close all display areas	Click the right button to close the screen area in all splicing units
Zoom to a single screen	Choose the screens in splicing unit, click to shrink them to a screen.
Zoom to occupied screen	Choose the screens in splicing unit, click to spread them on the screen fully.
Maximize to all screens	Choose the screens in splicing unit, click to spread them on all splicing units.
Save screen scheme	Click the right button to save display scheme of screen areas in all current splicing units.
		Save screen scheme X Project name Save

Application screen	Click the right button to apply existing screen scheme

Table 5.6.1.3

5.6.1. 2. Device list

Same as Real-time preview.

5.6.1.3. View

Same as Real-time preview.

5.6.1. 4. PTZ Control

Same as Real-time preview.

5.6.1. 5. Advanced Function

Same as Real-time preview.

TV wall configuration

Wall layout can be configured on the TV wall configuration page. Click the button© to enter the name of TV wall layout and then click “OK”. In this way, the name of TV wall layout can be added as shown below:

Figure 5.6.2.1

The current name of TV wall layout can be modified by clicking the button

Ö. After clicking “OK”, the name of TV wall layout can be modified as shown below:

Figure 5.6.2.2

To delete a TV wall layout, choose a layout name and click the button O.

The layout data cannot be recovered after the layout is deleted. Therefore, there is a prompt box for your confirmation. Click “Yes” button to delete the current TV wall layout; click “Cancel” to retain the TV wall layout, as shown below:

Figure 5.6.2.3

After setting the name of TV wall, click the lower configuration list to configure TV wall layout. It supports 1 screen, 4 screens, 9 screens, 16 screens and user-defined screen settings. At the same time, every screen can be adjusted, such as left justifying and right justifying. The parameters and description are shown below:

Parameter	Description
	Binding: tick “Decoding output channel” in equipment
	list, tick TV wall screen on the right and click it to bind
	the current decoding output channel with the screen.
	Unbinding: choose TV wall screen on the right and
	click it to unbind the current decoding output channel
	with the screen.
	Add 1 screen
	Add 4 screens
	Add 9 screens
	Add 16 screens
X	Define the rows of screens
■ X	Click to choose the screen to be deleted
w	Clear screens: delete all the screens on current TV wall.
	Left justifying: choose two screens at least and click

	to justify to the left side of the first screen chosen.
	Right justifying: choose two screens at least and click to justify to the right side of the first screen chosen.
Ft	Top justifying: choose two screens at least and click to justify to the top side of the first screen chosen.
in	Bottom justifying: choose two screens at least and click to justify to the bottom side of the first screen chosen.
:Q	Equalize size: choose two screens at least and click to equalize size with that of the first screen chosen.
Ell	Splicing: choose two screens at least and bind decoding output channel. The splicing shapes shall be regular (such as rectangle). Click to splice successfully.
El!	Cancel splicing: choose the spliced screens and click to cancel the splicing.
	Save: Click the button after setting TV wall. In this way, the TV wall screen layout can be saved.

Table 5.6.2.1

Wall resolution can be configured on TV wall configuration page as shown below. There are three resolutions: 1920×1080 50HZ, 1920×1080 60HZ and 4K 30HZ. If 4K 30HZ is set, decoding can be output from only one route.

Figure 5.6.2.4

Offline switch setup

Offline switch configuration is used for TV wall screen switch setting on decoder, as shown below. Code stream type, switch time and display mode of

every decoding output channel can be set.

Tiandy

Home page

Device management

TV Wall

@ © | e (!) – □ x 16:27:49

TV wall

nitiate offline switch

Stop offline switchini

■ Device List

E ■ 192.168.30.215

Decoding on…	192.168.30.72Decode output 3
Stream type	Mainstream	w
Switching ti…	30	▲ ▼	Set
Display mode	Single video		Move upward	Move down

Decode out…

Channel Name Length of stay (seconds)

Stream type

TV wall configur. Offline switch se…

admin

Figure 5.6.3.1

Choose decoding output channel and set display mode (such as sixteenscreens) as shown below.

Channel Name	5-nçjtTı of stay (set and’	Stream type	Channel Name	sngih of stay (second:	Stream type	Channel Name	2ngth or stay (second:	Stream type	Channel Name	angın or slay (second:	Stream type
Channel Name	angth of stay (second:	Stream type	Channel Name	engin of stay (second:	Stream type	Channel Name	angtn of stay (second:	Stream type	Channel Name	sngtn of stay (second:	Stream type
Channel Name	?ngtti of stay (second’	Stream type	Channel Name	scigth of stay (second:	Stream type	Channel Name	;ngth or stay (second:	Stream type	Channel Name	;ngth or slay (second:	Stream type
Channel Name	sngth of slay (sec emit	Stream type	Channel Name	jrigiti of stay (second:	Stream type	Channel Name	angth of stay (second!	Stream type	Channel Name	ength of slay (second:	Stream type

Figure 5.6.3.2

Choose the equipment from the left equipment list for offline switch and

drag the equipment to the channel. In this way, equipment can be added to the

screen. As shown below, click

Initiate offline switcfj

” at top right corner to start offline

switching, or click the right button on screen list to start offline switching. One channel cannot be added to any screen repeatedly.

Channel Name sngth of stay (second: Stream type

192.168.23.53:1

‘ Delete

Delete all

Offline switch

Figure 5.6.3.3

Choose the channels on screen, modify code stream type, switch time and sequence of channels on screen in above decoding output setting.

Relevant parameters on the interface are described below:

Parameter	Description
Initiate offline switch	Click to enable and start it to watch decoding video of the output channel on decoder.
Stop offline	Click to enable and start it to stop playing the

switching	decoding video.
Decoding output channels	The equipment supports several decoding output channels. Video effect of every decoding output channel can be set for actual need.
Stream type	Set code stream type of channels added to each screen. Choose the channels whose code stream type shall be changed from the following screen list, then choose code stream type from the drop-down box of code stream types. In this way, code stream can be switched. Note: Before changing code stream type, it is necessary to stop offline switching firstly.
Switching time	Set the interval of screen switching (unit: second) in range 10 seconds ~ 1000 seconds. The interval shall be integer. Choose the channel whose switching time needs to change. After changing switching time, click
	the button “^^^\|” to update duration of screen
	stay. Note: Before changing switching time, it is necessary to stop offline switching firstly.
Display mode	Set the screen display mode of decoding output

channel, such as single screen, screen in screen,

four screens, 1-5, 1-7, nine screens and sixteen

screens. 1-5 screen means 1 large screen and 5 small screens; 1-7 screen means 1 large screen and 7 small screens. The sequence of channel screens is in accordance with the sequence of addition. To change the sequence, choose channel firstly and

adjust screen sequence by pressing “

Move upward

Move down

Note: Before changing channel display

mode, stop offline switching firstly.

Table 5.6.3.1

5. 7. Face recognition

Click the face recognition icon

, on homepage to enter the interface

of face recognition for face database management, face database download and face configuration as shown below:

Figure 5.7

Face database management
Personnel Query

Personnel can be inquired based on name, serial number and gender.

2. Face Database Addition / Modification / Delete
Face database addition

Click the right button on left “Face database list”, choose “

Add

”to create

a new face database as shown below:

Figure 5.7.1.1

Enter name of face database and click “OK” button to create a new face

database. The name of face database is exclusive.

Face database modification

Click the right button on the name of face database to be modified, choose

enter a new name and click “OK” button to complete the modification.

Modify

Face database delete

Click the right button on the name of face database to be deleted, choose and click “OK” button to delete the face database.

Delete

5.7.1. 3. Face Image Addition

Choose the face database that needs face image addition, click “

to add face image as shown below:

Figure 5.7.1.2

Click “local upload” to upload face image (required item). Image format shall be JPG and the dimensions shall be 300*300~800*800; the size shall not be larger than 1 MB. The image shall be clear enough for easy face recognition.

Enter name of the image (required item).

Enter corresponding serial number of the person (required item). The serial number can be 0~ 999999999.

Other items are not required and can be filled in for actual demand.

Click “

” to save information of the current person and create a new

page of person information.

Click “

” to maintain current personnel information and close the

page.

Click “

Cancel

” to close the current page of personnel information.

4. Add Existing Face Image

Choose a face database, click “

” and choose the personnel to be

added as shown below; click

” to complete the addition. The page

current personnel can be closed by clicking

Cancel

Figure 5.7.1.3

5. Delete (All) Face Image(s)

Choose the face image to be deleted, click “

” to delete the chosen

image; to delete all face images, click “

Delete all

6. Face Image Import / Export / Export All

1) Import

Click “ I”

to enter the import page as shown below. Click “download

import template” to download template of personnel information.

Figure 5.7.1.4

Fill personnel information in the template as shown below:

AttentiorUse the 1

Province City Address Company ID type ID numbeiImage patFace library name

Tianjin Tianjin Xiqing Di**** Co., ID card ^r12011120CC:/FacePiFace database

Personnel Serial ntCard numtGender (nphone nmrEirthday Country

Zhang Sa/123 ^r6666 Female ‘12345678^2000-01-lChina

Figure 5.7.1.5

Tick “personnel information sheet” or “personnel information image (name

# job number)”, click “

Select files

” to import file, click “OK” to upload the file; click

cancel” to close the page.

Face database download

Choose the channel of face database download from left “equipment list”

(the channel shall support face recognition).

Tiandy

Home page

Face recognition

Facedataba… Facedataba… Face configu…

q I Add Remove Copy to

□ ■ Device List Q Face database nchronous stat

E M 192.168.23.54

E M 192168.23.53

Operation

admin

Figure 5.7.2.1

Click “

” to choose a face database to be synchronized, then click

“OK” as shown below.

Figure 5.7.2.2

Status and result of synchronization can be seen on current page. If the

synchronization fails, click “operation result” on “operation” page to find information of synchronization failure as shown below. If you want to try

synchronization again, choose the content to be synchronized and click

Click “

Figure 5.7.2.3

” to delete the current face database in current channel.

Remove

” to copy it to other channel.

Face configuration

On the page of face configuration, face database can be started for current channel; face similarity can be set as shown below.

Device management

Facedataba…	Facedataba…	Face configu.
	Q	Similarity so	% (1-100)	Set

Homepage

Face recognition

□ ■ Device List Face database

Enabled

E M 192.168.23.54 label

E M 192168.23.53

E M 192.168.16.221

□ M 192.168.18.103

Ş 192.168.18.103-Chani

admin

Figure 5.7.3.1

5.8. Inlet and outlet management

Click the exit I entrance management icon

on homepage to enter

exit I entrance management page. Human gate and vehicle gate can be managed as shown below.

Figure 5.8

Gate management

Same as face recognition.

Face database management

Same as face recognition.

2. Face database download

Same as face recognition.

Live view

The monitored areas can be previewed on the page of preview as shown below. Equipment gate opening and lifting linkage is supported.

X Gate management

A Lw view

A History of the gate

R Checkpoint preview

A History of checkpoint

PAD

Open pate

Oîlamly Co..Lid AH Rights Reserved

Figure 5.8.2.1

Click the right “ ” to unfold equipment list, set real-time equipment preview

sequence and the equipment shown. As shown below, choose the equipment

to be moved, click “

Move upward

Move down

” to change the sequence.

	Device PAD	>
	■İlli

Move upward	Move down

Figure 5.8.2.2

History of the gate

On the page of human gate history, access areas, user name and access

time can be searched as shown below.

Figure 5.8.3.1

Click “

View

” to find access information of the user as shown below.

Figure 5.8.3.2

Checkpoint preview

Real-time captured image at checkpoint in current monitored area can beseen on the page of checkpoint preview as shown below. Information of vehicle

can be found.

Tiandy

Home page

System configuration

TV Wall

Device management

ft Gate management

S. Lnewew

A History of the gate

A Checkpoint preview

A History of checkpoint

License plate number

Vehicle color

Vehicle brand

Channel number

Vehicle type

Transit time

Driving direction

OTiandy Co Ltd A* Rights Reserved

admin

Figure 5.8.4.1

Click the right “ ” to unfold equipment list, set real-time equipment preview

sequence and the equipment shown. As shown below, choose the equipment

to be moved, click

Move upward

Move down

” to change the sequence.

Figure 5.8.4.2

History of checkpoint

Access area, license plate number and access time can be searched on the page of checkpoint history as shown below.

X Gate management

A Lm view

A History of the gate

Access area aii t Number of license plate

Serial number Access area

Access tme 2021-11 -24 00 00 00 0 TO 2021-11-24 23:59 59 m

Number of license plate

Transit time

Operation

A Checkpoint preview

A History of checkpoint

Totall Page 20ltems/page ▼ < 1 > To

OTtandy Co. .Ltd AH Rights Reserved

Figure 5.8.5.1

Click

View

to find access information of the vehicle as shown below.

Figure 5.8.5.2

1. ElectronicMap

Click the electronic map icon

on homepage to enter the page of

electronic map management and operation as shown below.

Figure 5.9

Drag the image manually or operate mouse wheel to change position of the image or zoom it in.

- 1. Electronic Map Configuration

Click

“to configure the electronic map as shown below:

Figure 5.9.1

5.9.1. 1. Add Map

Click “

, as shown below, enter map name and choose route of

map, click “OK” to save the current map; or click “cancel” to close the current

page.

Figure 5.9.1.1

2. Delete Map

Choose an electronic map from right list of maps, click “

” and there

will be a prompt dialog box as shown below. Click “Yes” to delete the electronic map; or click “cancel” to close the prompt dialog box and the map will not be

deleted.

Figure 5.9.1.2

3. Modify Map

If you want to modify map name or the base map, you can click “ as shown below, click “OK” to save the current map; or click “cancel” to close the current page.

Modify map		X
Map name	Nacy
Image path	J6e35317d777a5bf06cb6c a.jpg		Browse
	Confirm	Cancel

Figure 5.9.1.3

4. Add / Delete Equipment

In the self-defined equipment list on the right of edit interface, choose the equipment to be added to the electronic map, drag it to the area that needs the equipment. In this way, data collection channel can be added. Drag channel

equipment icon “ ” to change addition position.

Add alarm two nodes, including alarm input

and alarm output

electronic map and the input node will lash upon receiving the alarm of alarm input;

cancel alarm

Clear alarm

’via the right key menu. Alarm output can be used for

controlling two status

Open alarm output

Close the alarm output

” of alarm output on and off via right key

menu.

If the equipment was added, “added already” will be prompted as shown

below.

Channel 6 Added

To delete equipment, choose the equipment and click the right button on

; or choose the equipment in the left list of electronic maps, click

” to delete the equipment on the current electronic map.

5.9.1. 5. Configure Hot Zone

Click

” to link other electronic maps on the current electronic map

as shown below. Tick the left electronic map and click “

” to add the

” to move back

E-map Related hot zone

Figure 5.9.1.4

electronic map to the right linked area; or click electronic map from right linked area to area of electronic map. Click “OK” to show the hot zone icon “-•” on current electronic map. Drag it to set position of hot zone anew. Or click “cancel” to close the current page.

Configure hot zone X

To delete the hot zone, choose it and click right button on this way, the hot zone can be deleted from current electronic map.

. In

Electronic Map Preview

Click “

to preview current electronic map as shown below.

Figure 5.9.2.1

On the page of electronic map preview, the image can be dragged

manually to change its position; or operate mouse wheel to zoom in.

Click “

” to preview the image on the whole screen.

Click “

” to return to the last step.

1. User management

Click the user management icon on home page to enter user

management interface. The interface will display the basic information of all added users at that moment, as shown in below figure:

Tiandy

Home page

Uier management

Real-time preview

adminO!

tKlmiri

Figure 5.10

[ Note ] Only admin-super administrator account has the authority to enable this function.

- 1. Add user

Click

Add

to enter Add user interface, as shown in below figure:

Figure 5.10.1

The description of related parameters in the interface is as follows:

Parameter	Description
User level	Set administrator or operator for current system.
User name	Users to fill in any name. [Note] There’s illegal character limit when adding user name, following characters are not allowed to be input ~!#$%^A()=[]{},”:;'<>?*’+/\&.
Password	To set password for newly added user.

Confirm password	Needs to be the same as input “Password”.
Validity	Set the expire date of the authority for users.
Description	Supplement and describe user information.
User authority	Set the user authority of administrator or operator, such as the authority of video browsing, audio preview authority ,PTZ control, video playback, video download, system lock, system delock, intercom, alarm check, etc.
Permissions	Set devices permit user authority to apply.

Table 5.10.1

Note: Audio preview authority is mainly used for controlling the playing of all audios in the control platform.

( 1 ) Audio preview authority, cloud platform control authority, video playback authority and video downloading authority are based on view preview authority. In other words, if any one of video preview authority, cloud platform control authority, video playback authority and video downloading authority of one channel needs starting, start video preview authority first;

( 2 ) Talkback authority is based on audio authority. Talkback authority of the host can be enabled, when audio authority of at least one channel under such host has been enabled;

5.10.2. Edit user

to enter Change

Select the user needs to be edited, click

users interface, as shown in below figure:

Figure 5.10.2

In the editing interface, the related information of the user can be changed, including user level, user name, validity, password, description, user authority and permissions. Admin-super administrator can only change password.

5.10.3. Delete user

Select the user needs to be deleted, click

and a notice box

will pop up, as shown in below figure:

Figure 5.10.3

Click “OK” to delete the selected user; click “Cancel” to cancel deletion.

[Note] Several users can be deleted at the same time.

1. Intelligent search

Click the intelligence retrieval icon

on home page to enter the

intelligence retrieval interface.

5.11.1. Face retrieval

Tiandy	Homs page	Intelligent search

• f. J, _	Device LISI
		*Startime 2021-11-2300 00 00 S Endtime 2021-11-25 23 59 59 (Ş) Gender «U ’ Age group » ’**
		*Wearing mas m » Wearing glasses « • Body temperature measurement AM » Retrieve**
	□ • a Deoust
	y’ 192168 2354	Output Export all Select al twit Selection
	*El 1» IM 2353**
		üst Figure
	El k 19216816221	—

	b IM	*2021-11-2515 55 41 ‘charmeM Male Youlh glasses Nomas Invalid twaas Plartrack**
	□ k 192 168 23 S4
		2021-11-25 15 55 41 ’^L’⁸⁸’⁸, Male Youth Nomas* invalid Dois Pia>M<* Channel 1 glasses
		*2021-11-25 15 55 41 ¹^?’⁸⁸’⁸, Male Youth Homas invalid OOls PiaıMr»**
		Channel 1 glasses *2021-11-25 15 54 05 ’’JL’⁸⁸’⁸, Mie Youth Homas invalid OOls Piaitadr Channel 1 glasses**
		2021-11-2515 54 05 ^,^„¹⁸⁸ J,⁸, Male Youth ^M^,^2″⁹ Homas* Invalid OOls Piartwr* Channel 1 glasses
		2021-112515 54 05 ¹?„!??, J,⁸, Male Youth Notwearng _Moma5k «valid OOls Pl art»» Channel 1 glasses
		2021-1125 15 53 38 ‘onarmeM ^Ma(e Youth Unknown Nomas* Invalid Mali Piartar*
		2021-11-2515:53:37 ¹ CharmeM Male JunKx Unknown No mas* invalid OOls Piartar*
		2021-11-2515:53:37 ‘^cnarmeM ^{Mae Voultl} Unknown Nomas* invalid OOls Piartwr*
		*2021-11-2515 52 46 J,⁸, Male Youth Unknown Nomas invalid OOls Piartoa Channel 1**
		*2021-11-2515:51:10 ¹5?-.¹⁶ll⁸. Male Junior Unknown Nomas invalid nois piartaa Channel i**
		*2021-11-25 15 50 19 ’“’“J,⁸, Mae Youth Nomas invalid non piartoa Channel i glasses**
		*2021-11-25 15 50 19 ‘■’« Youth Homas* nvaiid non PUrtwa Channel 1 glasses**
		*2021-11-25 15 50 18 ’“’“J,⁸, Male Youth Nomas nvand not. Piartwa Channel 1 glasses ■**
		… .
		Toori47Piece TowiOPage < i 2 3 > lb Page
		©Tiandy CO ltd Al Rights Reserved ad™

Figure 5.11.1

Retrieve by starting and end time, by gender, by age group, by whether wearing mask, by whether wearing glasses and by body temperature measurement are supported.

Users may select any channel among watch points on the left, set query condition and click “Retrieve” to retrieve the detailed information recorded by this watch point in the time period, both list and figure display form are supported.

Click “List” and the retrieval result will be displayed in list, including capture time, channel name, gender, age group, whether wear mask, whether wear glasses and body temperature measurement; click “Details” to check the detailed information of captured picture, as shown in below figure, click “Playback” to check playback video.

Figure 5.11.2

Click “Figure” and the retrieval result will be displayed in figure, the detailed information of captured picture and playback information will be checked, as shown in below figure:

Figure 5.11.3

Select any data in the retrieval result and click

” to download this

data result to local device, the exported result is shown as in below figure:

Snapshot 2020-11-2	Channel rGender 192.168. liale	Age groupWearing		gWearing jt		Body tempBig pictLSmall picture path 0 E: /T e s t / e E: /T e s t / e a s y 7 /F a c eP i <	:/20
Snapshot 2020-11-2	Channel rGender 192.168. liale	Youth	Wearing	gNo	mask		:/20
2020-11-3	192. 168. IFemale	Youth	Wearing	gNo	mask	0 E:/Test/eE:/Test/e as y7/Fa c eP i<	:/20
2020-11-3	192.168. liale	Junior	Wearing	g Wearing jt		0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Not weariNo		mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Not weariNo		mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-2	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. liale	Youth	Wearing	gNo	mask	0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-3	192.168. Hale	Middle	agNot weariNo		mask	0 E:/Test/e E:/Test/eas y7/Fa c eP i <	:/20
2020-11-3	192.168. liale	Youth	Not weariWearing n			0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20
2020-11-2	192.168. liale	Youth	Not weariWearing n			0 E: /T e s t / e E: /T e s t / e a s y7 /F a c eP i <	:/20

Figure 5.11.4

Click

” Exoc t c

to export all retrieved results.

Indoor electric vehicle testing

Figure5.11.2.1

Search can be based on beginning and ending time.

Users can choose equipment that supports the algorithm from left

monitoring points, set query conditions and click

Retrieve

” to find all recorded

detailed information of the monitoring point during the time. The information can

be presented in list format or graph format.

Search result can be presented in list format by clicking

including capture time, channel name, alarm type etc. The detailed information

of captured image can be seen by clicking “

Details

” as shown below. Click

Replay

” to watch playback.

Search result can be presented in graph format by clicking

Figure5.11.2.2

Detailed information of captured image and playback information can be seen as shown below.

Choose any datum from search result and click “

” to download the

data; or click

Export all

” to export all search results.

Details		X
2021/11/25 15:56:33		Channel 1
	B
Channel 1
Indoor electric vehicle testing
► ◄< 1/15 !►		2021-11-2515:56:34

Figure5.11.2.3

1. Data statistics

Click the data statistics icon

on home page to enter the data statistics

interface.

5.12.1. Face statistics

Face statistics supports to carry out statistics by age group, by gender, by the number of people, by whether wear glasses, by whether wear mask and by body temperature measurement.

Statistics by age group

According to age group, the face statistics can be divided into junior, youth, middle age and old age to display. The platform supports list and graphic

display, as shown in below figure.

Figure 5.12.1.1

Figure 5.12.1.2

Statistics by gender

According to gender, the face statistics can be divided into male, female and unknown to display. The platform supports list and graphic display, as shown in below figure.

[Note] :When the device detects people shape but does not detect face, it will display “unknown”.

Figure 5.12.1.3

Figure 5.12.1.4

Statistics by the number of people

The statistics of the number of people every hour in face statistics. The

platform supports list and graphic display, as shown in below figure.

Figure 5.12.1.5

In graphic interface, click

to switch to line chart display, click

” to switch to bar graph display.

Figure 5.12.1.6

Figure 5.12.1.7

Statistics by whether wearing glasses

The statistics of whether wearing glasses in face statistics, can be divided into not wearing glasses and wearing glasses to display. The platform supports list and graphic display, as shown in below figure.

Figure 5.12.1.8

Figure 5.12.1.9

Statistics by whether wearing mask

The statistics of whether wearing mask in face statistics, can be divided into no mask and wearing mask to display. The platform supports list and graphic display, as shown in below figure.

Figure 5.12.1.10

Figure 5.12.1.11

Statistics by body temperature measurement

The face statistics will conduct statistics of the number of people with abnormal body temperature every hour by time. The platform supports list and graphic display, as shown in below figure.

Tiandy

Intelligent search

Home page

Real-time preview

All rights reservea. lianoy technologies co. Ltd

Figure 5.12.1.12

Tiandy	Home page	Intelligent search	Data statistics Real-time preview			IS SI-21
	■					Ldi
		*vr lypcoi wailSTICS rooy icr-tccrecur. • 1 ypc CT topun. ‘ncpon • vale CT statistics: af£V* 1 di**		Statistics	Output	Ldi
					—
H Visitor flow ctaTotrc	* ■■ Device list	Lisi	Graphics

	□ -r fc 192.168.16221		Statistical Time 00000059 01P0-0159 0200 0259
	✓ ♦ i9ai«a.r«22io □ 192.roa.1J2 0 I b l92.lfia.25AS				0 0
	Fl k 192168.16222		!İîİSİİi!8!îSİ§İİiİSS		0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0
A			All rights reserved. Handy technologies Co, ltd			admin

Figure 5.12.1.13

Visitor flow statistics

Guest flow statistics supports two methods namely real-time statistics and report statistics. Real-time statistics can monitor the real-time guest flow according to the established area, and give an alarm when the number of person hikes too much; the report statistics can count the number of people entering, leaving and passing by in the established area, and display them with a list or a graph, as is shown in below figure:

Figure5.12.2.1

Real-timeStatistics Device List

Enter the device list bar, type in the key information in the search box, and double-click to locate the guest flow equipment, as is shown in below figure:

Figure5.12.2.2

Select the device in the guest flow device list and right-click to pop up the right-click menu of guest flow device list, as is shown in below figure:

Analysis configuration

Log off the affiliated host computer

Turn off all videos

Main code stream

Subcode stream

Video interruption

Time calibration

Manual alarm

Figure5.12.2.3

Select “ Analyse Config.” to enter configuration tool page to view the

configuration of each present channel, as is shown in below figure:

Figure 5.12.2.4

Relative parameters explanation of the interface is as below:

Parameters	Explanation
Analysis channel name	Switch channels and analyse the configuration of each channel.
Mode	Read the algorithm supported by the front-end device and draw it in the right video frame or directly in the video frame.
Sample	Display the effect sketch shown in the video box.

Max. Size of the target	Display the maximum size of the target, and the range can be set from 6% to 30%
Min. Size of the	Display the minimum size of the target, and the range can
target	be set from 5% to 20%
Sensitivity	Set the detection sensitivity. The higher the sensitivity, the more sensitive it is. The range can be set from 0 to 100.
Video frame	Display the video and its algorithm under the channel.
Hide prompt	Hide the prompts in the configuration information on the left.
o	Redraw the statistical area in the video graph.
	Redraw the statistical lines in the video graph.
	Eliminate the lines.

Table 5.12.2.1

Other right-click menu button 5.2.1 device listo

Click

©Add Device

in device list to enter guest flow camera configuration

page, as is shown in below figure:

Figure 5.12.2.5

Parameters

Explanation

In the left device list, select the device or device channel.

In the right guest flow camera list, select a group, and click to add the device or device channel to the guest flow camera group.

In the right guest flow camera list, select a group or device channel, and click to delete the group and its device channel or device channel from the guest flow camera list.

Relative parameters explanation of the interface is as below:

t/ Export

+ Add Group

In the right guest flow camera list, select the node and click to add the guest flow group.

In the right guest flow camera list, select a group and click to delete the guest flow group.

O Delete Group

In the right guest flow camera list, select the node and click to modify the guest flow group name.

0 Modify Group

Table 5.12.2.2

Real-time Statistics Area List

Enter the area list to shift area scene, as is shown in below figure:

Zone list

O Add area

Old school

Figure5.12.2.6

In the area list, click “i to delete established area, click “Ej” to update the

configuration information of present area

, click “

©Add area

to enter the area

configuration page to set information of area detection time, capacity, number of people surge, whether or not to enable alarm, detection device channel, etc, as is shown in below figure:

Figure 5.12.2.7

Relative parameters explanation of the interface is as below:

Parameters	Explanation
Area name	Set the name of the detection area to facilitate the rapid positioning of the area.
Start time/End time	Set the time of starting and finishing of statistics.
People capacity	Set the upper limit of the capacity. This is required.

	Set the upper limit of the increase of the number of people
Rapidly increased	in the unit time (10 minutes, 30 minutes, 1 hour, 2 hours).
number of people	This is a required field. Set alarm interval, supporting 10, 20, 30, 40, 50, 60
Alarm interval	minutes.
Number of people	Set the current number of existing people.
staying	Set the detected channel video to be detected. Multiple channel videos adding is possible. Select the channel video to be deleted. Multiple channel videos deletion is possible.

Table 5.12.2.3

Add

Delete

5.12.2.3. Real-time Data of Real-time Statistics

Select the area to be viewed in the area list, and the configuration information of the area can be viewed at the bottom of the interface, as is shown

in below figure:

Figure 5.12.2.8

Relative parameters explanation of the interface is as below:

Parameters	Explanation
Recount	Click to eliminate the recorded number of people.
Peak	Record the maximum number of people in current area.
Current number of people	Record the number of people at current time. If the number exceeds the one that can be accommodated, it will turn into a red box; otherwise, it will be a green box.
Enter/Leave/Passing	Record the number of people in three status namely entering / leaving / passing by. At the same time, the color of each case is distinguished. Red colour represents entering, green leaving, and blue passing by.
Real-time Line Chart	The number of people is displayed in real time according to minutes. Red represents entering, green represents leaving, and blue represents passing.
B	Capture, capture picture save path can be changed from [system settings] > [common settings] > [path settings].
K	Start all videos. The video download and save path can be changed from system Settings > Common Settings > Path Settings.
ini	Set the number of pictures, supporting picture display amount 1,4, 9, 36, 49, 64.

l”j	Full screen, full screen display of video page and realtime data page. Click again to cancel the full screen.

Table 5.12.2.4

5.12.2.4. Video Page of Real-time Statistics

View the video effect of real-time preview in video page, as is shown in below figure:

Figure 5.12.2.9

Refer to 5.2.2 Video Preview Window for page-related parameters. :

5.12.2.5. Report statistics

On the report statistics page, count the number of people in a selected area. It supports the statistics of the number of people entering, leaving and passing by according to the detailed time, as is shown in below figure:

Tiandy

Home page

System configuration

Real-time preview

Date statistics

Eouipment management

Face statistics

Type or report. Oaih Recon Statistics Output E) < * Ota school B * Outcbor List Graphics

staosiKai me
00 004»»
01 004)1 »
02 004)2»
03 004»»
04:00-04»
05 004»»
06 00 06»
07 00-07»
06:00-08»
09:004»:»
10:00-10»
11:00-11:59
12:00-12»
13:00-13:»
14:00-14:»
15:00-15:»

Number or people entering

M nghts reserved Tiandy Technologies Co. Ltd

Figure 5.12.2.10

Select the report type and statistical time. If statistics need to be made according to the detailed time, enable the “detailed time” check box, and the statistics of the number of people in the detailed period will be displayed during the statistics. Click “export” to export the statistical data to the machine, as is

shown in below figure.

Tiandy

Home page

System configuration

Real-time preview

Data statistics

Equipment management

X Face statistics Real time stati Report statistics

•?. Visitor flow statistics Q

Type or report Daily Repon

□ • * Zoneliol

Statistics Output

□ m Old school

E m Outdoor List Graphics

▼ Date al stall 2020-11 -23

3 E7| Detail lime 09 ▼ 00 »

Number ot people leaving

Number ol people passing

Figure 5.12.2.11

The data can be displayed in the two forms namely list or graph. The

graphic form supports line chart and bar chart, as shown in below figure:

Figure 5.12.2.12

I lunay Homepage System configuration Real-time preview Data statistics tquipmerfl management

I Face statistics Real time stati Report statistics

•5 Visitor flow statistics Q

Type ol report Dmlv Report • Dateotslati 2020-11-23 H Detailtime

LJ ■ k Zonilist Statistics Output

S -r k Oto school ’

□ k outdoor List Graphics

v Humber of s Number or Number or l.li \S Histogram

Figure 5.12.2.13

Alarm configuration

Click the alarm configuration icon on home page to enter the alarm

configuration interface. To conduct alarm configuration on watch point and device respectively is supported.

Alarm configuration of watch point

Figure 5.13.1.1

Select the channel needs alarm configuration in the watch point on the left,

, click “set”

tick and select required alarm type, set whether to enable

o|set coordinated action

to set the operation of coordinated alarm or coordinated

recording in corresponding alarm type, as shown in below figure:

Figure 5.13.1.2

Note: Set linkage under defense deployment status by ticking “link or not”.

Linkage will take effect under defense withdrawal status by ticking “link or not” and “defense withdrawal enabled” at the same time.

Set coordinated alarm

Tick and select the check box ahead of “Audible alarm”, select alarm audio effect in the drop-down list, customized alarm audio supported (supported audio format is .wav), alarm audio audition supported.

Set coordinated recording

Click Add and set “Coordinated monitoring point”, as shown in below figure:

Figure 5.13.1.3

Select the channel needs to set recording, click

to add the

target channel of coordinated recording, click

Cancel

to restore to last

parameter setting. Click the number below or

Advanced

to continue to set

“Pre-recording” and “Delayed recording” time, as shown in below figure:

Figure 5.13.1.4

Pre-recording and delayed recording interval supports the time setting of

0s, 5s, 10s, 15s, 25s and 30s, click

to save time setting, click ”

Cancel

Figure 5.13.1.5

to restore to last parameter setting.

Copy to other channel

Click and select the type of alarm, click

to copy the parameter of

Enabled status, Coordinated client action and Coordinated monitoring point of

the selected copy to other channel, as shown in below figure:

Click ”

channel.

All enabled/All disabled

All enabled

«disabled

to enable/disable all types of alarm in

the

5.13.1.5. Email setup

Click

Email setup

“button, and the E-mail can be configured. After

the

configuration is successful, the email alarm can be linked. As shown in the

figure below:

Figure5.13.1.6

Relative parameters explanation of the interface is as below:

Parameters	Explanation
SMTP service	Configure the E-mail server address.
User name	Configure sender E-mail name.
Thorization code	Configure sender E-mail authorization code.
Receiver	Configure the recipient E-mail address.
Connection testing	Verify that this method can connect successfully.

Table 5.13.1

Alarm configuration of the device

Figure 5.13.2.1

The specific operation is the same as the alarm configuration of monitoring point.

Alarm configuration of people counting area

Tiandy

Home page

Data statistics

Equipment management

Alarm configuration

Monitoring point

Device

People counting area

•i westdoor

Alarm Type	Alarm grade	Enabled	Operation	Coordinated client action	Coordinated mot
Capacity eweeded	iGrade •		Set	NO	No
Alarm for surge	IGrade •	•	Set	No	No

Set the linkage action Copy to All enabled All disabled Advanced

Figure 5.13.3.1

The specific operation is the same as the alarm configuration of monitoring point.

Operation logs

on home page to enter the operation

Click the operation log icon I

log interface. Login log, operation log and configuration log query supported, as

shown in below figure:

Figure 5.14

The description of related parameter in the interface is as follows:

Parameter	Description
Starting time	Available to set the starting time of log query.
Ending time	Available to set the ending time of log query.
User name	Available to query the operation record of one user. Admin-super administrator user may check the operation record of all users.

Log Type	Available to query logs by type, including all, login, operation and configuration.
Detail Type	Available to conduct detailed classified query of all, login, operation and configuration by type.
Log description	Search key word to query log information.
Export Logs	Click Export Logs, available to output and save logs.
Query	Click Query, available to query logs according to query conditions.
Reset	Click Reset, to restore query conditions to default status.
Total X Pages	Display how many pages does the query result has.
To X Page	Select a page to jump to the log record on that page.

Table 5.14

DSS Pro Install and Configure Instructions

admin — Wed, 24 May 2023 12:47:28 +0000

DSS Pro is a comprehensive and expandable Dahua VMS for flexible, scalable, reliable and powerful central management. With client-server architecture, DSS Pro provides central management, information sharing, convenient connections, and multi-service cooperation. The software provides basic functions such as user permission management, device management, alarm management, and central storage, but also delivers advanced features of video wall and map configuration, access control features, video intercom, attendance, and analytic functions such as face detection and object detection. It also integrates add-ons such as business intelligence and traffic surveillance.

DSS Server Installation

This guide will show how to download and install DSS Pro.

Read Next :

DSS Express V8 User Manual

SmartPSS Installation and User guide

Step by Step Instructions

Install Server Software

1.Download and run the Install package for DSS Pro

Check the box to agree to the Software agreement.

Click Next

2. Select Main Server when you first install

If you are installing the server in a distributed network, select Sub Server

Click Next

3. Select the installation path

– Make sure there is enough space on the disk for the server software – It is suggested to install in a non-system disk

Click Install

The process may take 4-8 minutes.

Once fully installed click Run to start DSS Pro server

DSS Pro Server configuration

The DSS Professional Server software will display the Config Wizard on first startup

All network cards for the server will be displayed.

Select the network card and click Next Step

Please note the license key can only be bound to one network card, if you change the network card the license key will be void.

Disable or enable TLS1.0

It is recommended to disable TLS1.0 due to serious security vulnerability in the TLS1.0 protocol

Click Finish

DSS Server software is now installed.

DSS Sub Server Installation

This guide will show how to install and setup a DSS Pro Sub Server.

Prerequisites

DSS Pro V8 installed as a Main Server on another computer on the same network:

DSS Pro Main Server Installation

DSS Pro V8 Client installed:

DSS Pro Client Installation

DSS Pro V8 installer downloaded:

Build Date: 12-10-2022

Patch Build Date: 03-17-2023

A computer that meets DSS Pro Requirements:

DSS Pro system Requirements

Step by Step Instructions

1. Download and run the installer package for DSS Pro.
Check the box to agree to the Software License Agreement and then click on Next

2. Select the option for Sub under “Select server type”.
Then click on Next

3. Choose the installation path or leave it as default.
Then click on Install

4. Wait as the software is installed

5. When the installation is complete, click on Run

6. After the DSS Pro software starts up, check on the box next to the network card you want to use for the Sub Server to communicate with the Main Server and the rest of the network.
Then click on Next Step

7. Enter the local IP address of the DSS Pro Main Server that is already running in the Center IP field.
Then enter the HTTPS port of the DSS Pro Main Server in the HTTPS Visiting Port field.
And click on Finish

8. Wait for all the Sub Server’s services to start up.
It will says “Running” at the top right when they have all started

9. Log into the Client of the DSS Pro Main Server and click on the Setting icon on the left

10. Select System Deployment at the bottom

11. You should see the Sub Server’s IP address listed with “Sub Server” under “Type”.
Enable the slider next to it under “Operation”

12. The DSS Pro Sub Server’s services will all restart.
Once all the services are running again, you should see “Running” under Server Status

13. Click on the Gear icon to the right of the Sub Server

14. Click on the drop-down below “Server Type” and either choose Sub Server to keep it as a standard Sub Server that only helps distribute the load from connected devices, or select Standby Server so that the Standby Server takes over if another Sub Server goes down. (Which requires another Sub Server to be setup in addition to the Standby Server.)
Then click on OK

15. Click on Allocate Resources at the top

16. Drag an added device from the list on the left to either the Main Server or Sub Server to choose which server manages that device’s resources.
Repeat this process for all devices in the list.
Alternatively you can select Auto Allocation and the system will automatically choose which server manages each device’s resources.
When you are done, click OK

DSS Server Configuration

This guide will show how to configure DSS Pro server settings, such as external IP mapping, port mapping , and the ability to start and restart the server and server services.

Prerequisites

DSS Express V8 Pro server installed – How To Install DSS Pro Server

Step by Step Instructions

Click DSS Professional Server icon to open the Server software for configuration

DSS Professional Server

Server status is displayed on the top right corner of the window

Server Starting Running Server Offline Exception

Use the buttons on the top left of the window to control the server services – Restart All, Stop All and Refresh all services are available

Use the buttons on the top right of the window for different DSS server functions:

	Function
1	User Manual – Open User Manual for DSS
2	Language – Select English or Chinese
3	Security – Disable or enable TLS1.0
4	Setting – Map the IP of DSS Pro server to an external IP address
5	About – Click to Display Version information of DSS Server

Click the to modify the service port number. Server will automatically restart after modification.

DSS Server Parameters

This guide will show how to configure System parameters for DSS Pro server such as

Message Retention Period
Time Sync
HTTPS setup
Login Mode
Remote Log

Prerequisites

DSS Pro V8 installed

Step by Step Instructions

1.Login to DSS Pro Client and then go to System Parameters menu.

Message Retention Period

Set the retention period for different types of message/records from the server.

Click in the Retention Period field to adjust the Retention Period for the Message Type

Records beyond the defined retention period will be automatically deleted.

Click Save

Time Sync

Set the time for devices to sync time with DSS

1. Schedule Time Sync – enter a start time in time sync for each day and the interval

2. Sync Time When Device Comes Online – syncs device time when the devices goes online

3. NTP Time Sync – If there is an NPT server in the system you can enable this function to let DSS sync time with the NTP server

Backup and Restore

This guide will show how to backup and restore settings for DSS Pro.

Prerequisites

DSS Pro V8 Server and Client

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Backup and Restore

3. Under Manual Backup

1. Backup Path – Select a location to save the backup file to

2. Click Backup Now

3. Enter the Login and Encryption (if enabled) Password for the server

Click OK

The Backup file will process

A prompt will confirm a successful backup

License Activation

Description

This guide will show how to activate the DSS Pro license.

Four ways to activate license:

Normal offline activation
Normal online activation
Upgrade from Express through offline activation
Upgrade from Express through online activation

Prerequisites

DSS Express V8 Pro installed
License Key that you received from your Sales Rep

Example:

Step by Step Instructions

Normal Offline Activation

1.Login to DSS Pro Client and then go to License menu.

Copy the License Key from the key file obtained and then click Activate Now

The software will confirm the license and restart

Normal Online Activation

The procedure for applying for an activation code is similar to offline activation, if your server is connected to the Internet, you can click Activate Now button and wait for activation.

Normal Offline Activation

Coming Soon

Upgrade from Express

Coming Soon

DSS Client Installation

Description

This guide will show how to download and install DSS Pro Client software.

Prerequisites

DSS Express Pro server installed
Windows computer

Step by Step Instructions

Download and Install DSS Client

1. You can Download the Install package for DSS Pro PC Client, from the DSS Pro server itself.

There are two methods:

open DSS Server click Open Administrator Client

Input the address of DSS Server in browser

Both will direct you to the server page, here you can

Select which client you need to download PC or Mobile Click Download

2. Run the DSS Pro Client installer

Check the box to agree to the Software agreement.

Click Next

3. Select the installation path

Click Install

The installation process will begin

Once fully installed click Run to start DSS Pro Client

First Time DSS Pro Client Configuration

The DSS Client needs to be configured to connect to the desired DSS Pro server

Auto Search will display any DSS servers discovered on the local network

Click Fill in server information to Manually Add the DSS Pro Server by IP

Enter the IP of the server Enter the Login port, default 443

Click OK

Create a Password for the system user for DSS Pro

Enter a password twice to confirm

Click Next Step

Set up security questions for password recovery

Click OK

Add Device

This guide will show how to add a Dahua device to DSS Pro.

Prerequisites

DSS Pro V8 Server and Client
Dahua Device connected to the network

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Device.

4. Click on Add.

5. Select the adding mode and then enter device information. In this example, we are using IP address mode. For P2P and Auto-register, it must be setup first from recorder or IP Camera. Click Add.

6. Enter Device Name, select Device Type, and use the dropdown box to select the Time Zone. Click OK.

The device is now added to DSS.

> Return to DSS Pro instructions

Troubleshooting Tips

In the event that your device added but can’t see any cameras added to the software, please follow this following steps.

1. Click on the Edit button on your device.

2. Go to Video Channels. And then click on Get Info.

You can also use the dropdown box under Features to manually select the device features

3. The software will refresh the connection to the device and retrieve the camera channels that added to recorder. Once populated, click OK.

Import Device

This guide will show how to multiple Dahua devices at once to DSS Pro using the Import feature.

Prerequisites

DSS Pro V8 Server and Client
Dahua Devices connected to the network

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Device.

3. Click Import

4. Click Template Download to download an example import template file that can be used.

Open the template file in Excel and modify as required.

Template requirements/example:

Click to Select File – Click this to upload the completed template file with all device information.

Channel Features Selection

This guide will show how to configure advanced features for channels, important such as for devices with features such as Intelligent Alarms such as Face Detection or ANPR cameras.

Prerequisites

DSS Pro V8 Server and Client
Device(s) connected to the network, added to DSS Pro

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Device.

3. Click the next to the device/channel to modify the features for

4. Select Video Channel

Click the dropdown box under Features then click to select the features to enable for this channel, for example Intelligent Alarm

Click OK to save

Device Configuration

This guide will show how to configure device settings, such as for devices added to DSS Pro.

Prerequisites

DSS Pro V8 Server and Client
Device(s) connected to the network, added to DSS Pro

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Device.

3. Click Device Configuration

Devices that are added to DSS Pro will appear in the Device Tree in the center

4. Expand the device tree and select the channel to configure (for example, the video channel)

5. Configure Device settings as desired:

Feature	Description
① Configuration	Configure Smart Plan / Intelligent Analysis settings for the device*
② Event Information
③ Recording Information	Add or remove record plans for devices. Click here for how-to setup Recording Schedules.
④ Record Retrieval	Configure backup so videos on the device can be automatically uploaded to DSS for redundancy. Click here for instructions.
⑤ Recording Storage Config	Configure the video retention period for the device’s recorded video. Click here for instructions.
⑥ Channel Bind	Bind a video channel with an alarm input channel, ANPR channel, access control, or another video channel to view associated video when an event occurs. Click here for instructions.

* For supported devices

Add Retrieval Plan

Toggle to enable/disable

Use the dropdown box for Recording Retrieval Length to select 1, 2, 3, Days

Configure the schedule to select

Click OK

Note: Up to 3 days of recordings can be backed up to DSS Server

Recording Storage Config

For videos stored on the DSS server you can configure video retention period. When the storage space runs out, new recorded videos will overwrite the oldest videos automatically.

Toggle to enable/disable

Enter a Retention Period (in Days)

Click OK

Note: Retention Period is 0-180 Days

Add Device LPR

This guide will cover how to add LPR camera to DSS Pro V8.

Prerequisites

DSS Pro V8 Server
DSS Pro V8 Client
Dahua License Plate Recognition Camera

Step by Step Instructions

1. Open the DSS Pro V8 Client.
From the Home page select the Wrench icon on the left

2. Under “Basic Config” select Device

3. Select Add Device on the left.
Then select the Add option at the top

4. Under “Add Mode” click on the drop-down and select the appropriate option for how the DSS will connect to the License Plate Recognition Camera

5. Under “Device Category” click on the drop-down and select ANPR

6. Enter the information for connecting to the camera.
(In this case IP Address was selected as the Add Mode.)
Then select Add at the bottom

7. Enter a name for the camera under “Device Name”.
Then click on the drop-down below “Device Type” and select Access ANPR Camera

8. Click on the drop-down below “Device Series” and select Dahua ITC
Make sure the number of channels and the Timezone are correct.
When you are done, select OK at the bottom

9. You should see the camera listed in your device list at the top.
If it does not show an Online Status of “Online” immediately, select the Refresh option at the top until it does

Liveview Playback

This guide will show the options that available for Playback in DSS Pro V8 Client.

Prerequisites

DSS Pro V8 Server and Client
Dahua Device connected to the network
Dahua Device added to DSS Pro V8 – Click here for how-to add device instruction.

Step by Step Instructions

1.Login to DSS Pro Client and click on Monitoring Center.

2. Click on Playback and select the camera channel under Resources.

Below is the operation menu that available under Playback.

SMD Search

If you would like to download video footage, please click here for instructions.

Download

DSS Pro V8 – Download Center

Description

This guide will show how to download recorded video using DSS Pro V8 Client.

Prerequisites

DSS Pro V8 Server and Client
Dahua Device connected to the network
Dahua Device added to DSS Pro V8 – Click here for how-to add device instruction.

Step by Step Instructions

1. Go to Home, and then click on Download Center.

2. Select the Camera channel, choose the Date and Time for video footage you wish to review, and click Search.

 NOTE: under Position option, you need to select where the recording is saved. Store on Device is searching playback file from the recorder and Store on Server is searching playback file from DSS Storage.

3. Select the time period from the timeline. It will prompt user to enter the device password.

4. Enter the date and time you world like to download, and you can also choose the video format by clicking on the Transcode. By default the format will be .dav.

5. Your download will begin.

6. You can modify the storage path through the local settings.

User Management

This guide will show how to add Users and Roles for DSS Pro.

Prerequisites

DSS Pro V8 Server and Client installed

Step by Step Instructions

Create Role

1.Login to DSS Pro Client

From Home Click User

2. To add a Role

Select Role

Click Add

3. Enter the role name (if required copy the permissions from another role)

Select the corresponding permissions

Device Permissions – Select which devices are visible to the role Control Permissions – Select which device control options for the role Menu Permissions – Select which menu permissions for the role

Click OK to save all changes.

Create User

1. To add a User

Select User

Click Add

2. Enter the basic user information, such as username and password

You can also select which other options you want for the user, such as Password Changing/Expiration policy

3. Click the +

Local Disk Configuration

This guide will show how to setup and configure local disks for DSS Pro.

Prerequisites

DSS Pro V8 Server and Client
HDD installed to DSS Pro

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Storage

3. Click on “Server Disk”. and then choose your drive and click on the Initialize button.

NOTE: This will format your HDD, all files inside that drive will be removed.

4. Once the drive is initialized, click on Settings button to assign disk type. There are 3 types for storage, they are Video, Picture (Snapshot), and ANPR Picture (for LPR camera).

5. Once completed, your storage is now ready.

Please click here on how to schedule a recording to DSS Storage.

Net Disk Configuration

This guide will show how to setup and configure a Net Disk for DSS Pro.

Prerequisites

DSS Pro V8 Server and Client
Net disk – in this guide the EVS will be used

It is recommended to setup/configure EVS first before adding as a Net Disk to DSS

Click here for instructions on how to setup the EVS as a Net Disk

Use Ethernet cable to connect DSS (Port 3/4) and EVS (Port 1)
If you need to configure RAID, you should configure it on EVS first
The IP address of the EVS device network port and the IP of the DSS device network port should be in the same network segment (for example 192.168.1.x for Both Devices)

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Storage

3. Click Add NetDisk

4. Enter the information of the Net DIsk

Click Add

5. Initialize/Config/Format the disk using the Operation functions

Disk Group Operation

Description

This guide will show how to setup and configure a Disk group for DSS Pro.

Disks that are added to DSS Pro can be grouped together to create a Disk Group.

You can then configure devices added to DSS Pro to record to specific Disk Groups.

Prerequisites

DSS Pro V8 Server and Client
Devices added to DSS Pro

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configurations > Device menu.

From Home Select the Configuration menu

2. Click on Storage

3. Click Add

4. Enter a disk group name

Select the disks to add to the group

5. Select the channels to record to this disk group

Click OK to save

Local Recording Schedule

This guide will show how to setup local recording in DSS Express V8.

Prerequisites

DSS Pro V8 Server and Client
DSS Local Storage has been setup. – Click here for how-to setup local storage instruction.

Step by Step Instructions

1.Login to DSS Pro Client and then go to Configuration menu.

2. Click on Device.

3. Click on Device Configuration menu.

4. Select your Camera Channel from device root. You will see option for Recording Information. Click on Add Record Plan.

5. Under Record Plan, make sure you Enable it, and then select the Stream type and create your recording schedule. By default, it is set to 24/7 recording. To modify the Time Template, click under Time Template Selection, and click on Create Time Template.

Once everything set, click OK.

6. Your device will now record to DSS Local Storage.

Please click here on how to review recorded video from DSS Local Storage.

DSS Agile 8 Setup

Description

This article will cover how to setup DSS Agile 8 with DSS Pro V8

Prerequisites

DSS Pro V8 Server Setup and Running
DSS Agile V8 Downloaded and Installed on an Android or iOS device
All Default DSS Pro V8 Ports forwarded on the network: List of Ports to Forward

Step by Step Instructions

1. Open the DSS Agile 8 app on your mobile device.
Select Agree to accept the Software License Agreement and Privacy Policy

2. Swipe the screen from right to left to flip through the introduction images.
Then select Get Started

3. Enter the following information:
– Username
– Password
– Server Address
– Port (The HTTPS Client Login Port)

Then select Login

4. If your mobile device was able to connect and login to your DSS Pro V8 server you will see the following page.
Draw the login pattern so you can quickly login to the server in the future.
(If you don’t want an unlock pattern select “Skip” at the top left and skip to Step 6.)

5. Confirm the same pattern from Step 4

6. You are now connected to your DSS Pro V8 Server

Milesight VMS Enterprise Setup Guide

admin — Sat, 20 May 2023 18:30:37 +0000

Milesight VMS Enterprise Setup Guide, Milesight VMS Enterprise is a professional video management software. For using full functions, users need to get license and activate it. About the operation process, please check the details below.

How to activate VMS Enterprise

Milesight VMS Enterprise is a professional video management software. For using full functions, users need to get license and activate it. About the operation process, please check the details below.

1. Activate VMS Enterprise

1.1 How to activate in the Wizard interface

After logging into the system, the VMS system client interface will show as below. If you create Owner user and first login into the VMS system, there is a wizard window displayed in the client interface.The wizard will help you to quickly configure and use the VMS system, including some basic configuration page: Security, License, Devices and Storage. If you create a new system, then there is a pop-up wizard as shown below at system’s very first login and once only.

Here you can choose directly to skip wizard or click button to star wizard, and in the second step of the wizard, we can activate the license.

Read More :

Milesight CMS VMS installation user guide

Hikvision Password Reset Do It Yourself

License

The License wizard will guide user how to activate license.

There are two options, including: “Enter License Key and I Want Free Trail”.

Note: Now Mliesight VMS only supports camera access license.

①: Free Trial Activation

Step1: Click button. If this is the first time you use the VMS software, then a window will pop up as shown below:

Step2: Select server which a license is registered to and click button, then a Free Trail information card will show in the License wizard interface as shown below:

Note: The Free Trial with 4 camera access is a time-limited experience license that expires

in 6 month after activation. You can contact our sales to purchase our license to access more channels.

②: Online Activation

Step1: Click button and wait for several seconds, a window will pop up as shown below:

Step2: Select server and input activation code, then click the button;

Note: The format of the activation code is 16-digit hexadecimal, and the letters in it are all lowercase letters.

Step3: After you verify the activation code successfully, the license information card will show in the License wizard interface.

③: Offline Activation

Step1: Click button. If neither target server nor client computer is not connected to the Internet, then licenses can be activated offline.

Step2: Select server and Input Activation Code, then click button. Here you can operate according to current step tips.

1.2 How to activate in the Settings interface

Except activate license in the wizard, you also can activate license in the Settings interface, the steps are basically the same as in the “Wizard”. It could be found in the:

“Settings -> System&Servers -> System Settings -> License Activation”:

Click the button, then the window will pop up as shown below, in this interface, you also can choose “Free Trial” , “Online Activation” or “Manual Activation”.

①: Free Trial

Step1: Click button. If this is the first time you use the VMS software, then a window will pop up as shown below:

Step2: Select server which a license is registered to and click button, then a Free Trail information card will show in the License wizard interface and as shown below:

Note: The Free Trial with 4 camera access is a time-limited experience license that expires

in 6 month after activation.

After trying the free trial, you can choose to contact our sales to purchase the license to obtain the activation code, and add the license in the following steps to directly expand your layouts to 64 channels.

②: Online Activation

Step1: Select server and Input Activation Code, then click the button;

Step2: After you verify the activation code successfully, the license information will show in the interface, and you can continue to add more license by clicking button.

③: Manual Activation

Step1: Click button. If neither target server nor client computer is not connected to the Internet, then licenses can be activated offline.

Step2: Here you can operate according to “current step” tips as shown below:

1) Click button to export the “LicenseRequest.bin” file and save to your local storage path or flash memory, then click button. The window will change as step tip2;

2) Copy the address to another online server URL search box and the Milesight License Activation website will show as below. You can upload the previous exported “LicenseRequest_xxxx-xxxx-xxxx-xxxx.bin” here;

3) If the activation code is correct and valid, then the website will show as below. You can click button to download the response file;

4) Import the downloaded license response file from activation website, and click button to activate the license. If you want to import the response file later, you can click button.

Finally the license has been activated successfully.

Note：

①: How to deactivate in the Settings interface

You can also choose to deactivate your license in the Settings interface and activate it on another computer. For example, when replacing a server: if you want to use this license on another computer, you could deactivate it from this server, and then activate it on another server.

After the operation is successful, a prompt interface will pop up, you can choose to “Reactivate” on this computer, or click “OK” to deactivate the license from your computer.

②: Multiple Activations

If you want more channels, you can contact the sales to buy the license again, and then activate it directly, the total number of channels will be superimposed on the previous number.

2. Status

After you activate the license successfully, the license will be added to the License Activation list and the working status will be displayed.

There are some other operations as below:

①: Click button to import the response file to activate the license.

②: Click button to deactivate the license. After deactivation, this activation code can be reactivated or activated and used on other servers. The free trial license does not have this option.

③: Click button to delete the license. This option is only for the license whose status is not Working.

④: Click button to check each license details.

⑤: Click button to export the license list in the system.

⑥: Click button to overview usage condition of activated licenses.

Note: Each License can only be registered to one server because license is bound with hardware information (Including: CPU serial number, motherboard serial number, BIOS serial number and the MAC address of the first physical network card) of computer on which server resides. If there is an exceptional occurrence of server, all licenses of the computer on which server resides will become invalid. And once the server starts to run, the licenses will automatically become valid and restore working status.

How to Set VMS Enterprise User

Chapter I Introduction

Milesight VMS Enterprise supports User Management and Role Management, which can be used to manage the user’s permission. User management and role management enable authorized users to use authorized functions normally and legally, but exclude unauthorized users, which greatly protects account security.

l User Management

Users can be added, modified and deleted from the User Management page in “Milesight VMS Enterprise Client”. Several properties of a user including User Name, Password, Confirm password, Role, Email Address and Remark can be configured.

l Role Management

Role Management supports configuring the same functions and operation permissions for multiple users under a role. The resource access of role includes Function, Operation, Camera and Layout. There are four types of role which can’t be deleted by default, including Owner, Administrator, Operator and Viewer. Also, you can add or delete customized roles. Different roles have different resource access:

Owner: There can only be one user who is Owner, which is the user added when the system is created, and the priority of role is highest.

Administrator: Own full access to function and operation permissions, resource access including Camera and Layout.

Operator: Own part access to function and operation permissions, resource access including Camera and Layout.

Viewer: Own part access to function and operation permissions, resource access including Camera and Layout.

Customized roles: You can customize the role permissions.

You can configure cameras for the customized roles. The administrator and owner can share their configured layout with the users under the role, so that users under the customized role can access to the devices in the layouts.

l The application of User&Role

User&Role can be used in E-map and Event Rule Settings. You can configure the user’s permissions on the E-map. And you can configure show notification to the specified users.

Chapter II User Settings

2.1 User Management

1. How to add a user

Step1: Click the button in the Settings -> System & Servers -> User Settings -> User Management interface.

Step2: Set the User Name, Password, Confirm password, Email Address and Remark as you want. And select a Role for the user, which include Owner, Administrator, Operator, Viewer and other custom roles.

Note:

1. There can only be one user who is Owner, which is the user added when the system is created, and the priority of role is highest.

2. The password must contain at least 8 characters and cannot consist of only digits or letters.

Step3: Configure user expiry date. When the user date expired, the user can’t login into the VMS system.

Note:

The user whose role is Owner never expire by default.

Step4: Configure three security questions for users, and each user can modify only his or her own security questions. Users need to answer these security questions before resetting the password, which greatly improves security.

Step5: Configure to change the password periodically, which are supported for better security protection. Change the password every 10 days, 30 days, 60days, 90 days or customize days are optional, and the system will prompt you to change the password periodically.

Step6: Configure to change password when first login. The system will automatically prompts you to set a new password at first login. This option is supported for better security protection, too.

Step7: Click the button to save the basic information for user. And the user will be created to the user list.

Step8: Click the icon toggle to enable or disable this user.

Note:

1. The created users are enabled by default. When logging in to the VMS Client system, the user cannot disable itself.

2. If user is disabled, then the VMS Client system which the user login to will logout compulsively and pop up a reminder window “User has been disabled or deleted, please contact administrator”.

1. How to modify a user

Step1: Click a user which you want to modify.

Step2: Modify the information you want to change.

Note:

1. The Role attribute of user whose role is Owner cannot be modified.

2. The user name must be unique.

Step3: Click the button to save the modified information. And a successful configured message will pop up in the lower right corner.

Note:

When you click other buttons outside the control panel before save the modified information, a window will pop up to inform you “Configuration is not saved, discard changes?”.

2. How to delete a user

Step1: Click a user which you want to delete.

Step2: Click the button , and a reminder window “This user will be deleted” will pop up. Click the button to delete the user.

Note:

If you check the checkbox to keep user history data and even if click “OK” button to delete the user, then tag or locked recording video files added by user can still be kept.

2.2 Role Management

1. How to manage roles

There are four types of role which can’t be deleted by default, including Owner, Administrator, Operator and Viewer. Also, you can add or delete customized roles. You can create multiple users under a role, then all users under the role will be listed in the User List.

Note:

You can click the button to delete the user under the role.

(1) How to add customized role

Step1: Click the button in the Settings -> System & Servers -> User Settings -> Role Management interface.

Step2: Set the Role Name and Remark you want.

Step3: Click the button to save the Basic Information for role. And the role will be created to the role list.

Note:

The role name must be unique.

(2) How to modify a role

Step1: Click a role which you want to modify.

Step2: Modify the information you want to change.

Step3: Click the button to save the modified information. And a successful configured message will pop up in the lower right corner.

(3) How to delete a role

Step1: Click a user which you want to delete.

Step2: Click the button and a reminder window “This role will be deleted” will pop up. Click the button to delete the user.

2. How to configure role’s permissions

Different roles have different functions and operation permissions, resource access including Camera and Layout.

(1) Administrator

Own full access to function and operation permissions, resource access including Camera and Layout. Even if Camera and Layout pages are not displayed, Administrator has full access to camera and layout of VMS system by default.

(2) Operator

Own part access to function and operation permissions, resource access including Camera and Layout. Even if Camera page is not displayed, Operator has full access to camera of VMS system by default.

Note:

1. The Operator has more access than the Viewer, like the Operator can operate the devices and access the Video Wall and Event logs.

2. The Layouts will be introduced in next part. About Layouts

(3) Viewer

Own part access to function and operation permissions, resource access including Camera and Layout. Even if Camera page is not displayed, Viewer has full access to camera of VMS system by default.

(4) Customized role

You can customize the role permissions.

Step1: Click a customized role which you want to configure the role’s permissions. And click the button.

Step2: Select permissions for customized role as needed.

Step3: Click the button to save the permissions. And then a successful configured message will pop-up in the lower right corner.

3. How to configure cameras for the customized roles

You can configure cameras for the customized roles as needed.

Step1: Select cameras for customized role as needed.

Step2: Click the button to save the cameras.

Note:

When the customized role has Device Management Permission, the camera cannot be disabled.

4. About Layouts

Here the users of Administrator or Owner role can select the Operator, the Viewer and the customized role to share the layout, so that users under the Operator, the Viewer and the customized role can use the layouts and have access to the devices in the layouts.

(1) How to configure customized layouts

Step 1: First, determine the channels and their locations you’re interested in, then right-click the camera live view window in the Live View interface to pop up a menu. And select option to save the layout.

Step 2: You can name the new layout, and clickbutton to save it. Then the layout will be displayed under the Layouts module in the left Resource Panel.

Step 3: Right-click the corresponding layout and selectoption to preview the camera in the layout. You can also directly double-click the corresponding layout for quick viewing.

Note:

The operation of setting layout in the Playback interface is the same as that in the Live View interface.

(2) How to share layouts

Step 1: In the Settings -> System & Servers -> User Settings -> Role Management interface, users of Administrator or Owner role can select the corresponding role to share the layout.

Step 2: Choose the layout you want to share on the Layouts page, and click button, the layout icon will change to . In this way, all users under the corresponding role can use this layout and have access to the cameras in the layout.

Step 3: Click button to check cameras in the layout. Hover your mouse over the channel to see the thumbnail and related information.

2.3 The application of User&Role

1. How to use User&Role in E-map

Step1: Click the button in the E-map -> User Permission interface.

Step2: Configure the user’s permissions of this Map. Manage and View Only are optional.

Note:

The user under the customized role can see the assigned resources only.

Step3: Click the button to save configuration.

2. How to use in Event Rule Settings

Step1: Click the button in the Settings -> System & Servers -> Event Rule Settings interface.

Step2: Configure to show notification to the specified users.

Step3: Click the button to save configuration.

How to set up Failover on VMS Enterprise

1. Introduction

In order to improve users data protection and data security, we have added the Failover function in VMS Enterprise. In the same system, when a server fails, other servers with Failover function enabled will take over the camera and keep recording the video of failed server.

Note:

1. To use this function, need at least two servers.

2. When the failed server is restored, the camera’s video during the failure will remain on the replaced server and will not be sent back to the original server.

3. When multiple servers are ready for taking over the camera, the system dynamically allocates the camera based on the load of each server.

2. How to Set Failover

2.1 Add multiple servers to the same system

If the server is not added to any system, it is an Undefined server. You can select and add them to any system.

Note:

1. If the current server has been added to another system, the server can be detached from the system. Please follow the steps below to set it up.

2. To add into a system, need to enter the account and password of the system owner.

Step 1: Login to the VMS Enterprise, Select“Settings”-> Click“Server Settings”-> Choose a “server”-> Click“Detach Server”

Step 2: Choose“Remove or Keep cameras of this server from system” —> Wait for 5 seconds and click button to detach the selected server from this VMS system, then the server will become an undefined server.

(1) Only the Owner user has permission to perform the Detach Server operation and check the detach result.

(2) When there is an exceptional occurrence of server to make it offline, if you directly click button, the deleted server is not actually detached from system. Once server restores normal status, the server still can display in the interface and start working.

(3) After the last server is detached, all clients connected to the system will be forced to logout, and pop up a window to inform you“All servers in this system have been removed, please set up system or contact administrator”.

2.2 Set Failover

Step 1: Connect to the system, Select“Settings”-> Click“Server Settings”-> Choose a server -> Click“Failover”

Note: The“Max cameras allowed on this server”is depend on the VMS activation code.

(1) Check to enable the Failover function.

(2) Checkand all cameras in the system and their priorities will be displayed on the list below.indicates that continuous recording is enabled.indicates that continuous recording is disabled.

(3) You can select the cameras and set the priority including High, Medium, Low and Never. Then click button.

(4) Finish the setting and click button.

Note:

There must be unoccupied channels on the server whose Failover function is enabled. Only when the number of channels on the server is less than 128, the server whose Failover function is enabled can take over the channels of other servers.

VMS Enterprise ANPR Solution

I. What is ANPR

ANPR(Automatic Number Plate Recognition) is a technology that uses optical character recognition on images to read vehicle registration plates. For Milesight, the ANPR algorithm is embedded in cameras, which allows the cameras to recognize, capture and upload license plate images all alone and intelligently.

II. Why Milesight ANPR Solution

Ø Quick Capture & Accurate Recognition

l Accurate License Plate Identification Under all kinds of conditions

l High-reliability License Plate Recognition with more than 95% high performance accuracy

1. Up to 4 Detection Regions

2. Reliable Confidence Level

3. Vehicle Direction Recognition

4. Detection Regions of PTZ

5. DACH Region Recognition

Ø Intelligent Analysis & Efficient Management

White and Black List Management
A Stand-alone ANPR Solution
Fully Integrated with Milesight NVR/CMS/VMS Enterprise
3rd Integration: CGI

Ø Adaptable to Most Operation Requirements

Max recognition speed 120 km/h
Over 70 countries and regions
Various options

LPR 12X H.265⁺ AF Motorized Pro Bullet Network Camera

LPR 12X H.265⁺ Mini PTZ Bullet Network Camera

LPR H.265⁺ ABF Pro Box Network Camera

LPR H.265⁺ Mini Bullet Network Camera

LPR H.265⁺ Vandal-proof Motorized Mini Bullet Network Camera

LPR H.265⁺ Motorized Pro Bullet Network Camera

III. Countries/Regions that support ANPR

Currently, we have three kinds of LPR, including LPR1, LPR2 and LPR3. LPR1 is used in Asian region, LPR2 is for European region, and LPR3 is for Korea. It covers over 70 countries and regions.

LPR1:

LPR2:

CIS (former Soviet Union)

IV. How to set ANPR with Milesight Network Cameras

1. Settings

Step1: Go to“LPR”->“Settings”，after log in the web.

Check the checkbox “Enable License Plate Recognition”, and you can draw the screen to select the areas interested. There will be shown in the blue box as below.

[License]: A license will be automatically assigned to each device.

[License Status]: This column is used to display the status of the license, “Valid”or “Invalid”.

[Processing Resolution]: Default resolution selected is 1280*720. You can choose different resolution according to the network environment.

[Set LPR Detection Region]: You can set up to 4 ROI areas by drawing the screen. If you choose Normal Mode, it supports configuring the LPR detection regions for the current area. If you choose Advanced Mode

(Only for PTZ series), it supports configuring different LPR detection regions for different PTZ presets(Only support Preset 1~4 so far).

[LPR Night Mode]:

Achieve the best effect of LPR night recognition by adjusting different parameter levels. You can also schedule the Start Time and End Time, and adjusting the level according to the environment.

Step2: Schedule Settings. You can draw the schedule by clicking“Edit”button. And then click “Save” or “Reset” after finishing the setting.

Step3: Detection Settings and LPR Message Post Settings.

[Detection Trigger]: If you choose “Always”, camera will always detect the license plate. If you choose “Alarm input”, camera will only detect the license plates when Alarm Input is being triggered.

[Confidence Level]: You can set the confidence level from 1 to 10. When the confidence level of the license plate is higher than the set confidence level, it will push the license plate image to the logs interface.

[Repeat Plate Checktime]: Set the time interval for repeatedly reading license plates to effectively avoid duplicate identification of parking vehicles.

[License Plate Serial Format]: Formulate identification rules and automatically filter wrong license plate information to achieve more intelligent and accurate license plate recognition.

[Feature Identification]: Check Region, Direction, ROI_ID or All to enable Features Identification, it will display the corresponding information on the logs interface.

Note: Region detection only supports DACH region.

[LPR Message Post Settings]: Check the checkbox to enable LPR Message Post. It will push information to some third-party devices or software that are compatible with ours. Information can be pushed by RTSP, TCP or HTTP.

More information about LPR Message Post, please refer to Milesight-Troubleshooting-Integration between LPR Camera and NVR(VMS).

Step4: Don’t forget to click “Save” after finishing all settings.

2. List Management

Add the license plates to this interface as Black or White type (Black/White List), and then you can set the alarm action for these license plates in the corresponding Black list mode or White list mode interface. When these license plates are detected, the camera will respond to your settings accordingly.

[Add License Plate]: Select the license plate type as black or white, enter the license plate number, click the “Add” button, the license plate number will be added successfully.

[Batch Upload]: You can add a csv file of the license plates you want to add, click the “Browse”button to import the form to this interface, click the“Upload”button, the license plates will be added successfully.

[List Search]: Select Plate Type or directly enter the license plate number, click the “Search”button, the corresponding license plate will be displayed in the list as below.

[Export List]: Click the“Export List”button to export the license plates in the current list as a csv file locally.

[Delete List]: Click the“Delete List”button to delete all the license plates

in the current list.

3. Black /White/Visitor List Mode

Step1: Check the checkbox to enable Black List Mode.

Step2: Schedule Settings. You can draw the schedule by clicking“Edit”button.

Step3: Set Alarm Action.

Table 1 Description of the buttons

Step4: Set Alarm Settings.

Table 2 Description of the buttons

After that, when a license plate marked as“Black”,“White”,“Visitor”is detected, the camera will respond accordingly to your settings.

4. Professional LPR Liveview Interface

Milesight LPR camera supports professional LPR Live View interface. You can see the real-time license plate recognition results.

Note:

①　Upgrade your device to corresponded firmware version.

Camera: V4X.7.0.74 or above.

Firmware download link: http://www.milesight.com/support/download#firmware

②　If there is no SD card or NAS as the storage space, the snapshots of license plate will be temporarily stored locally on the PC, cleared after logging out, and do not support Smart Search which will be introduced in the next part.

5. Smart Search

Step1: Select Plate Type or directly enter the license plate number.

Step2: Select Start Time and End Time, click the “Search” button to achieve fuzzy search, then the corresponding license plates or license plates containing search keywords will be shown on the logs while the complete video and license plate information will be shown on the left of the interface.

There are two methods to backup LPR logs.

①　Backup license plates you want.

Step1: Tick license plates you want to backup and click “Backup” button ;

Step2: Select the export file type, video stream type and video file format, then click “Export” button.

②　Backup all.

Step1: Click “Export All” button;

Step2: Select the export file type, video stream type and video file format, then click “Export” button.

You can also click the “Auto Export” button to automatically export the logs to FTP, SMTP or Storage.

Note:

①　Insert available SD card or add NAS to camera as storage. Otherwise, you can’t check the LPR recording and snapshots.

②　Upgrade your device to corresponded firmware version.

Camera: V4X.7.0.74 or above.

Firmware download link: http://www.milesight.com/support/download#firmware

V. How to set ANPR with Milesight NVRs

1. Preparation

Here are some notes you should notice before using ANPR function.

①　Insert available HDD or add NAS to NVR as storage. (Otherwise, you can’t check the recording and logs.)

②　Upgrade your device to corresponded firmware version.

Camera: V4X.7.0.72-r16 or above.

NVR: V7X.9.0.7-r7 or above.

Firmware download link: http://www.milesight.com/support/download#firmware

③　Ensure your device support LPR/ANPR function.

Model of NVR:

MS-N1009-UT / MS-N1009-UNT
MS-N5008-UT / MS-N5016-UT
MS-N7016-UH / MS-N7032-UH(16 ANPR Channels)
MS-N8032-UH / MS-N8064-UH(16 ANPR Channels)
MS-N1009-UPT
MS-N5008-UPT / MS-N5016-UPT
MS-N7016-UPH / MS-N7032-UPH(16 ANPR Channels)

Name of LPR Camera:

④　Ensure that NVR can get license plate information. Please set TCP as Post Type which is the default mode. It can be set in Camera web page -> Advanced Settings -> ANPR -> Settings interface.

2. Settings

Step1: Go to“Event”->“ANPR”, select a channel and enable ANPR function.

[License]: A license will be automatically assigned to each device.

[License Status]: This column is used to display the status of the license, “Valid”or “Invalid”.

[Processing Resolution]: Default selected resolution is 1280*720. Users can choose different resolution according to the network environment.

Step2: Set ANPR function effective time. You can draw the schedule by clicking“Edit”button. Draw the schedule and then click “OK” or “Apply” after finishing setting.

Step3: Set detection parameters including Detection Trigger, Repeat Plate Checktime and Features identification.

[Detection Trigger]: Always and Alarm Input are available. It will only detect when alarm input is triggered if you select Alarm Input.

[Repeat Plate Checktime]: The same license plate information won’t be received on NVR within the time you set.

[Feature Identification]: Check Region, Direction, ROI_ID or All to enable Features Identification, it will display the corresponding information on the logs interface.

Note: Region detection only supports DACH region.

Step4:

Set the detected ROI region which can be up to 4 regions. License plate will only be detected in the ROI regions.

3. List Management

Make a license plate list for your own NVR ANPR system.

Upload license plates and set them with different license type here. 10000 License plates can be added at most.

Kindly note that the list is exclusive for NVR, working with all LPR cameras you add. It won’t synchronize with the list on camera side.

There are two methods to add license plates:

①　Add one by one.

Step1: Click Add button .

Step2: Input the license plate and select license type.

Step3: Click OK and then the license plate will be added into the list.

②　Batch upload by importing template.

Step1: Click Download Template button , select USB device folder and click OK to download Template.

Step2: Input all license type and license plate number as Template shows.

Step3: Click Import button , select the file and click OK to add all license plates into list.

4. Black/White/Visitor List Mode

We provide you three modes for better event management.

Black List Mode: Manage event for license plates in black list.

White List Mode: Manage event for license plates in white list

Visitor Mode: Manage event for those license plates do not have license type.

Steps for settings:

Step1: Enable Black List Mode/White List Mode/Visitor Mode as your demand.

Step2: Set effective time for the mode to work.

Step3: Set actions you need including Audible Warning, Email Linkage, Event Popup, PTZ Action, Alarm Output and Trigger Channels Record.

Note:

Do not forget to enable these modes, set effective time and record action for corresponded mode, so that you can get real-time video when license plate is detected (Effective time and record action is enabled by default.). You can refer to How to check ANPR record part for detailed record settings.

5. Professional LPR Liveview Interface

At the beginning, you need to switch the preview mode to ANPR mode.

There are two methods to enter live view ANPR Mode:

①　Right click the mouse and select ANPR Mode as preview mode.

②　Select ANPR Mode on live view bottom tool bar.

After entering ANPR mode, the real-time license plate information will be shown on the left of the interface once it get detected.

License plate information includes Plate Snapshot, Channel Name, License Plate Number, Detected Time and Plate Type.

Two License types:

—- License plate from Black List

—- License plate form White List

No License plates type will be shown if the license plate does not exist in Black/White list.

However, you can right click the license plate information to quick add it to Black/White list or delete it from Black/White list.

Besides, you can click the license plate information to check the latest X seconds (10s~20s) video.

Note:

1. X = 10 + Pre Record Time

You can set Pre Record Time in Storage -> Video Record -> Record Settings interface.

2. Make sure that HDD is available on NVR and correct record settings is made, so that you can check the record on live view. Please refer to How to check ANPR record part for detailed record settings.

3. Make sure that NVR can get the license plate information. Please set TCP as Post Type which is the default mode. It can be set in Camera web page -> Advanced Settings -> ANPR -> Settings interface.

6. Set/Check ANPR Record

Before checking recording files, please make sure that you have proceed correct settings to make record action work.

①　Set Recording

Step1: Set Smart Analysis as Record Type in Storage -> Video Record -> Record Schedule interface.

Step2: Enable Black List Mode / White List Mode / Visitor Mode as your demand.

Step3: Set Effective time and Trigger Channels Record action of your selected mode (Full effective time and trigger channel record are set by default).

Then NVR will record when license plate is detected .

Note:

Generally, record action is triggered by event. If you just enable ANPR function without enabling Black List/White List/Visitor modes nor setting record action, it means you just enable the function while record action is not set. Then no record will be triggered. So it is necessary to do all above three steps if you want to trigger record action.

②　Check recording

1. In Playback

Step1: Entering Playback -> Event Playback -> Smart Analysis interface.

Step2: Input corresponded information and click search button to search.

Step3: Click record to play the video searched out .

2.In Live View

Click the license plate information to check the latest X seconds (10s~20s) video.

Note:

1. X = 10 + Pre Record Time

You can set Pre Record Time in Storage -> Video Record -> Record Settings interface.

2. Make sure that HDD is available on NVR on NVR and correct record settings is made so that you can check the record on live view interface. Please refer to How to check ANPR record part to check if record action is correctly set.

7. Check/Backup ANPR Logs

①　Check ANPR logs

Step1: Search on Smart Analysis interface.

Step2: Input corresponded information and click search button to search.

Then you will get a whole ANPR logs list.

License plate snapshot will be shown on the logs list while the complete image video and license plate information will be shown on the left of the interface.

Step3: Click to play the video.

②　Backup ANPR logs

Two methods are available after searching ANPR logs out .

1. Backup license plates you want.

Step1: Tick license plates you want to backup and click backup button .

Step2: Select the export file type, video stream type and video file format, then click export button.

2. Backup all.

Step1: Click backup all button.

Step2: Select the export file type, video stream type and video file format, then click export button.

Then you will get corresponded file as selected export file type.

VI. How to set ANPR with Milesight CMS

1. Preparation

①　Refer to the NVR section

②　Upgrade your CMS to corresponded version.

CMS: V2.4.0.7 or above

Download link: http://www.milesight.com/support/download#software

2. Settings

Step1: Add NVR to CMS.

Step2: Go to“Device Config”, select a NVR and the channel, then enable ANPR function.

[License]: A license will be automatically assigned to each device.

[License Status]: This column is used to display the status of the license, “Va

[Set LPR Detection Region]: You can set up to 4 ROI areas by drawing the screen. License plate will only be detected in the ROI regions.

[Processing Resolution]: Default selected resolution is 1280*720. Users can choose different resolution according to the network environment.

Step2: Set ANPR function effective time. You can draw the schedule by clicking“Edit”button. Draw the schedule and then click “OK” or “Apply” after finishing setting.

Step3: Set detection parameters including detection trigger, repeat plate checktime and features identification.

[Detection Trigger]: Always and Alarm Input are available. It will only detect when alarm input is triggered if you select Alarm Input.

[Repeat Plate Checktime]: The same license plate information won’t be received on NVR within the time you set.

[Feature Identification]: Check Region, Direction, ROI_ID or All to enable Feature Identification, it will display the corresponding information on the logs interface.

Note: Region detection only supports DACH region.

3. List Management

Make a license plate list for your own NVR ANPR system.

Upload license plates and set them with different license type here. 10000 plates can be added at most.

Kindly note that the list is exclusive for NVR, working with all LPR cameras you added. It won’t synchronize with the list on camera side.

There are two methods to add license plates:

①　Add one by one.

Step1: Click Add button .

Step2: Input the license plate and select license type.

Step3: Click OK and then the license plate will be added into the list.

②　Batch adding by importing template.

Step1: Click Download Template, select folder and click OK to download Template.

Step2: Input all license type and license plate number as Template shows.

Step3: Click Import button , select the file and click OK to add all license plates into list.

4. Black/White/Visitor List Mode

We provide you three modes for better event management, which is based on two license types.

Black List Mode: Manage event for license plates in black list.

White List Mode: Manage event for license plates in white list

Visitor Mode: Manage event for those license plates do not have license type.

Steps for settings:

Step1: Enable Black List Mode/White List Mode/Visitor Mode as your demand.

Step2: Set effective time which means Mode works during that.

Step3: Set action including Audible Warning, Email Linkage, PTZ Action, Alarm Output.

5. Set ANPR Record

Step1: Set Smart Analysis as Record Type in Device -> Select NVR -> Record Schedule interface.

Step2: Enable Black List Mode / White List Mode / Visitor Mode as your demand.

Step3: Set Effective time and Trigger Channels Record action of your selected mode(Full effective time and trigger channel record are set by default).

Then NVR will record when license plate is detected .

Note:

Generally, record action is triggered by event. If you just enable ANPR function without enabling Black List/White List/Visitor modes nor setting record action, that means you just enable the function while record action is not set. Then no record will be triggered. So it is necessary to do all above three steps if you want to trigger record action.

6. Check/Backup ANPR Logs

①　Check ANPR logs

Step1: Search on Smart Analysis interface.

Step2: Input corresponded information and click search button to search.

Then you will get a whole ANPR logs list.

License plate snapshot will be shown on the logs list while the complete image video and license plate information will be shown on the left of the interface.

Step3: Click to play the video.

②　Backup ANPR logs

Two methods are available after searching ANPR logs out .

1. Backup license plates you want.

Step1: Tick license plates you want to backup and click backup button .

Step2: Select the Export File Path, File Type, Video stream type and Video file format, then click export button.

2. Backup all.

Step1: Click backup all button.

Step2: Select the export file type, video stream type and video file format, then click export button.

Then you will get corresponded file as selected export file type.

VII.How to set ANPR with Milesight VMS Enterprise

1.Preparation

① Refer to the NVR section

② Upgrade your VMS Enterprise to corresponded version.

VMS Enterprise: V1.3.0.0 or above

③ Only the LPR cameras added by MSSP protocol support ANPR function for VMS Enterprise.

④ Make sure that VMS Enterprise can get the license plate information. Please set TCP as Post Type which is the default mode. It can be set in the Smart Analysis -> ANPR Settings -> Detection Settings interface.

2.Detection Setting

Here the configuration of the camera web side will be automatically obtained. If the camera web side is not configured, you can configure it in the interface of VMS. After the configuration is completed, it will be synchronized to the camera web side.

Step1: Select a camera in the devices list tree, then click button to enable Detection.

[License]: Only LPR2 and LPR3 need to enter the license to activate the LPR function.

[License Status]: Show present license status, including Valid and Invalid. When the license status changes to be valid, the camera can start detecting the license plates.

[Process Resolution]: Resolution of the stream for LPR analysis, including 1920*1280, 1280*720.

Step2: You can click button to enable LPR Night Mode. The LPR Night Mode supports the optimal LPR night recognition effect by adjusting different parameter levels. You can choose Auto Mode which can automatically switch to night mode according to illumination intensity, or choose Customize Mode to set effective time manually.

Auto Mode Customize Mode

Step3: You can set up to 4 ROI areas by drawing the screen. If you choose Normal Mode, it supports configuring the LPR detection regions for the current area. If you choose Advanced Mode(Only for PTZ series), it supports configuring different LPR detection regions for different PTZ presets(Only support Preset 1~4 so far).

Normal Mode Advanced Mode (For PTZ camera)

Step4: Schedule Settings. You can draw the schedule by clicking button, and then click button after finishing the settings.

Step5: Set Detection Settings and LPR Message Post Settings.

Detection Settings LPR Message Post Settings

[Detection Trigger]: If you choose “Always”, camera will always detect the license plates. If you choose “Alarm Input”, camera will only detect the license plates during Alarm Input is being triggered.

[Repeat Plate Checktime]: Set the time interval for repeatedly reading the license plates to effectively avoid duplicate identification of parking vehicles.

[License Plate Serial Format]: Formulate identification rules and automatically filter wrong license plates information to achieve more intelligent and accurate license plate recognition.

[Features Identification]: Check All, Direction, Direction Region or Region(Only for LPR2) to enable Features Identification, and the corresponding information will be displayed in the ANPR Search interface.

[Enable LPR Message Post]: Click button to enable LPR Message Post. It will push information to some third-party devices or software that are compatible with ours.

[Post Type]: Information can be pushed by RTSP, TCP or HTTP.

[HTTP Method]: There are two HTTP push methods: Post and Get.

[Snapshot Type]: Three kinds of snapshot can be chosen: All, License Plate and Full Snapshot. When you choose All, License Plate Snapshot and Full Snapshot will be pushed.

Note: This option is available just for Post HTTP Method.

[HTTP Notification URL]: The camera can use the API URL to send LPR information to other devices when the license plate is recognized. The API URL format is defined by the HTTP Server.

[User Name]: User name for HTTP Server.

[Password]: Password for HTTP Server.

[Camera LPR Port]: This option is available for TCP Post type.

Step6: Click button to apply all settings.

3.ANPR Preview

After enabling Detection in the ANPR Settings -> Detection Setting interface, you can click button in the right Function Panel, and the real-time license plate information will be shown on the right of the interface once it is detected.

The license plate information includes Plate Snapshot, Device Name, IP, License Plate Number, Detected Time and Plate Type.

Two License types:

—- License plate from Black List

—- License plate from White List

No License plate type will be shown if the license plate does not exist in Black/White list.

You can right click on the ANPR notification push window to pop up a menu, and choose to add the license plate to White or Black List in the VMS system. If the license plate has already existed in the White or Black List of VMS system, then you can choose to change its type or delete the license plate from White or Black List.

Besides, you can click the license plate information to check the 20s video. (20s = the pre 10s + the post 10s of the license plate event)

Note:

Make sure that correct record schedule settings is made or the ANPR event rules are set to trigger recording, so that you can check the record in the ANPR Preview Panel. You can refer to 7(1) for operation steps.

4.List Management

Add the license plates as Black/White List as needed in the interface, and the license plates without the set types are the visitors. After enabling license plate recognition, VMS Enterprise will automatically receive the recognition result sent by the Milesight cameras and compare it with the black and white list added in VMS Enterprise.

1) Add license plates

You can choose either of the below two ways to add the license plates.

a. Add license plates one by one

Step1: Click button to pop up a Add Plate window, then input the license plate and select the license plate type as black or white list, and click button.

Step2: Repeat the Step1 to add other license plates manually.

b. Batch import license plates

Step1: Click button to pop up a Import Plates window. The imported file must be filled in according to the specified format. You can click button to download the template.

Step2: After filling in, click button to import the plates file, then click button.

After successful import, you can click button to modify the corresponding license plate and plate type.

Note:

l The format of the imported license plates file must be csv.
l The CSV must be saved in UTF-8 encoding format.
l A license plate can’t be repeatedly added to the plate list.
l Maximum quantity of license plates added in the list is 10000.

2) Search license plates

You can select the plate types including All, Black List and White List, or directly enter the license plate number, and click the “Search” button, then the corresponding license plates will be displayed in the list below.

Note: The text searched is a case-insensitive contiguous string.

In addition, you can click button to refresh the license plate list. And click button to cancel the filter for the license plate list.

3) Export license plates

You can click button to export the license plates in the current list to a csv form locally. If you filter the license plate list, only the filtered list will be exported.

4) Delete license plates

Click button to delete all the license plates in the current list. If you filter the license plate list, only the filtered list will be deleted. You can also click button to delete the corresponding license plate.

5.Black List/White List/Visitor Detection

Here you can set effective detection schedules for different detection modes, including Black List Detection, White List Detection and Visitor Detection. Only when the detection is enabled and the corresponding schedule is set, the corresponding detection results will be saved and can be viewed in the ANPR Search interface.

Step1: Click button to enable the function, and then click button to edit the schedule.

Step2: Click button to apply the settings.

Step3: If you want to set related actions for ANPR trigger, you can refer to Method2 of 7(1) for operation steps. Then the set actions will be triggered once the corresponding license plate type is detected.

Step4: Once the ANPR event rules which you set take effect, you can check the ANPR event information in the Logs -> Event Logs interface. The event logs contain the event information about Date/Time, Event, Source, Action, Target and Details.

You can set filter condition as you need. In addition, if there is a recording video information about event, then you can click button to check the event video.

6.ANPR Search

When the Black List/White List/Visitor Detection is enabled and the corresponding schedule is set, and the storage disk is enabled, you can view the corresponding detection results in the ANPR Search interface.

Step1: Check the cameras in the devices list tree, and select the plate type or directly enter the license plate number.

Step2: Select Start Time and End Time, and click button. Then the related license plate information will be displayed as below.

Click button to show Thumbnail Mode.

Click button to switch to List Mode.

Step3: Click on the thumbnail photo in Thumbnail Mode or license plate row in List Mode under the searched results, then the license plate details will be shown as below. If there is a recording video about the license plate recognition, then you can click button to play the video or click button to play the video in the playback interface.

Note:

Make sure that correct record schedule settings is made or the ANPR event rules are set to trigger recording, so that you can check the record in the ANPR Search interface. You can refer to 7(1) for operation steps.

Step4: You can click button to backup the ANPR files you want to a local folder.

Step5: After setting the backup file destination, type and format, click button to start the file backup. You can click button to check task backup situation as below.

Note:

The backup file of Plate List is csv format.

7.Set/Check ANPR Record

Before checking recording files, please make sure that you have proceed correct settings to make record action work.

Note:

In the Settings -> System & Servers -> Server Settings -> Storage Management interface, make sure you enable the storage disk you are interested in to store recordings and images of VMS system.

(1) Set Recording

There are two methods to set the ANPR record.

Method1: The record schedule settings.

Step1: Select a camera in the devices list tree in the Settings -> Devices -> Camera Record Schedule -> Schedule interface, then click button to enable Continuous Recording.

Step2: Set the Schedule, and then click button to apply the settings.

Method2: Set the ANPR event rules to trigger recording.

Step1: Click button to add the ANPR event rules in the Settings -> System & Servers -> Event Rule Settings interface.

Step2: Then select the trigger type as ANPR, set the source of trigger, and select the detection mode as your demand. And set the schedule and the Do Recording action. After setting the event rules, click button.

Step3: Then the event rules will be added to the event rule list. Click button to apply the event rules. The recording is triggered when the corresponding license plate type is detected.

Note:

Make sure the corresponding detection mode is enabled and the detection schedule is set. You can refer to 5 for operation steps.

(2) Check Recording

a. Playback

Step1: Select the camera in the Playback interface, click button to select the time.

Step2: You can check Show Event Mask to select the ANPR event, then the ANPR event videos will be displayed in the corresponding color.

Step3: Select the continuous recording or ANPR event recordings searched out on the time bar to play.

b. ANPR Preview

Click the license plate information to check the 20s video. (20s = the pre 10s + the post 10s of the license plate event)

c. ANPR Search

Click button to check the latest 20 seconds video or click button to play the video in the playback interface. (20s = the pre 10s + the post 10s of the license plate event)

How to Set VMS Enterprise Paging & Layouts & Tour Plans & Instant Playback

Chapter I Introduction

Live View is mainly used for viewing real-time video. The interface is mainly made up of left Resource Panel, center Viewing Panel and right Function Panel.

The left Resource Panel displays all servers and cameras in the VMS system. The center Viewing Panel supports up to 64 individual live camera streams on a single page. The right Function Panel has four tabs, including Notifications, ANPR Preview, PTZ Control and Tour List.

Here we focus on the Paging, Layouts, Tour Plans and Instant Playback function in the Live View interface.

1.1 Paging

Live View supports paging function. A single page can play up to 64 channels. Users can select the number of channels to play on a single page according to their needs.

1.2 Layouts

Both Live View and Playback support layouts. Layouts can be customized, so you can save the currently playing channels and their locations, which helps you watch and manage Live View and Playback more efficiently. In addition, users of Administrator or Owner role can share all layouts within the system with Operator or Viewer or the customized roles, so that users in Operator or Viewer or the customized roles can use the layouts and access the devices in the layouts.

1.3 Tour Plans

Live View supports Tour Plans, including Camera Tour Plans and Layout Tour Plans. All channels currently playing or the layouts will automatically switch Live View window by using the function, which makes it easy for users to view the live view by auto-switching.

1.4 Instant Playback

Live View supports Instant Playback function for the channel with video recording. Users can quickly view the video file in the last 5 minutes. In addition, when Instant Playback is enabled, it supports integrated window functions, including Digital Zoom, Fisheye Setting, Snapshot, Recording and so on.

Chapter II Operations

2.1 Paging

2.1.1 How to Set Paging?

Step 1: Enable “Paging in Live View” in the Settings -> Client Settings -> Local Settings -> Performance interface, and then click [Apply] button.

Step 2: Then the icon will be displayed in the upper left corner of the center Viewing Panel, and click it to pop up the page controller.

Step 3: In the page controller you can set the number of channels to play on a single page, and you can click to jump to the first page/last page/previous page/next page.

2.2 Layouts

2.2.1 How to Set Customized Layout?

Step 1: First, determine the channels and their locations you’re interested in, then right-click the camera live view window in the Live View interface to pop up a menu. And select [Save As Layout] option to save the layout.

Step 2: You can name the new layout, and click [Save] button to save it. Then the layout will be displayed under the Layouts module in the left Resource Panel.

Step 3: Right-click the corresponding layout and select [Play] option to preview the camera in the layout. You can also directly double-click the corresponding layout for quick viewing.

Note:

The operation of setting layout in the Playback interface is the same as that in the Live View interface.

2.2.2 How to Share Customized Layout?

Step 1: In the Settings -> System & Servers -> User Settings -> Role Management interface, users of Administrator or Owner role can select the corresponding role to share the layout.

Step 2: Then check the layout you want to share on the Layouts page, and then click [Apply] button, the layout icon will change to. In this way, all users under the corresponding role can use the layout and have access to the devices in the layout.

Step 3: You can click [Show Details] button to check devices in the layout. Hover your mouse over the channel to see the thumbnail and related information.

2.3 Tour Plans

The operations of Camera Tour and Layout Tour are similar. Here we take the operations of Camera Tour as an example.

2.3.1 How to Start and Configure Tour?

Step 1: There are three ways to start Camera Tour.

Method 1: Determine the channels you’re interested in, and right-click the camera live view window in the Live View interface to pop up a menu. And select [Start Tour] option to configure tour.

Method 2: Multiple cameras in the list can be selected by holding down [Ctrl] key on the keyboard, then right-click on the list to pop up a menu. And select [Start Tour] option to configure tour.

Method 3: If you already have a saved tour plan, you can right-click the corresponding tour under the Tour Plans module in the left Resource Panel, and select [Play] option to start tour. You can also directly double-click the corresponding tour to start tour quickly.

Step 2: After starting tour, you will enter the Tour Config interface. Then you can edit the name, the number of channels per play and tour interval. And click [Play] or [Save and Play] button to enter the real-time Tour interface. The saved tour will be displayed under the Tour Plans module in the left Resource Panel.

Step 3: Click the Tour List icon , and all channels added to the tour will be displayed in the right panel. The icon indicates that the channel is currently playing.

Step 4: After clicking the icon to pause the tour, you can modify the tour name, the number of channels per play, tour interval. You can also drag the camera from the left Resource Panel to the Tour List to add it. And click the icon to delete it by moving the mouse over the corresponding channel in the list. After the operation is completed, then click the icon to save the current configuration. You can click the icon to stop the tour.

2.4 Instant Playback

2.4.1 How to Enable Instant Playback?

Step 1: For the channel with video recording in the last 5 minutes, you can click the Instant Playback icon on the top toolbar of video window to view the video.

(Instant Playback is supported for multiple channels at the same time.)

Step 2: When Instant Playback is enabled, it supports the following integrated window functions. And you can use the corresponding function as needed.

① The top toolbar functions of video window:

Turn on Speaker, Start Talking, Enable Digital Zoom, Snapshot, Start Recording, Fisheye Setting, Close.

② The right – click menu function of video window:

Stream Type, Display Info, Add Tag for Selected Cameras or All Cameras in Layout, Full Screen Current View or Current Layout, Start Tour, and so on.

③ The bottom toolbar functions of video window:

Play, Pause, Play in Playback, Control playback progress through timeline.

Note:

Only when the continuous recording schedule is set, Instant Playback can support adding tag.

How to Enable VMS Enterprise Multi-Monitor

Chapter I Introduction

“Milesight VMS Client” supports multiple monitors display setting, which supports up to 4 monitors. Multi-Monitor function meets the needs of users for more application scenarios. Each monitor has 4 modes to choose from, including [None], [Live Screen], [Alarm Screen] and [Full Screen]. Both Live Screen and Alarm Screen support up to 64 channels in single screen. The Full Screen only supports displaying 1 channel. In addition, Multi-Monitor function also supports identifying monitors of corresponding screens.

Different screen modes support different functions.

l None:

No settings are made for other monitors.

l Live Screen:

For this mode, you can add any camera you want to display on the specified monitor so that you can view the real-time video. In addition, the Live Screen mode supports up to 4 monitors and 64 live view channels per monitor.

l Alarm Screen:

For this mode, you need to set the event rules and select the action of [Show on Alarm Screen] for the camera, then the real-time video will be played on the specified monitor when the corresponding event is triggered. This is helpful for users to track camera event in time and view the real-time video.

l Full Screen:

For this mode, you can directly set [Show on Full Screen] for the selected camera in the Live View interface, then the real-time video will be showed on the specified monitor as full screen mode. Of course, you can also set the event rules and select the action of [Show on Full Screen] for the camera, then the real-time video will be played on the specified monitor when the corresponding event is triggered. It solves the inconvenience of not being able to operate other interfaces after the Live View interface channel goes full screen.

l E-Map:

Users can use the E-map function in this mode.

l Playback:

For this mode, users can search and play back the recorded files of selected cameras.

Note: You can only set one Alarm Screen and one full screen, and there is no limit to the number of Live Screen, E-Map Screen and Playback Screen.

Chapter II Operations

2.1 How to Enable Multi-Monitor?

First, click the Enable icon to enable Multi-Monitor and then click [Apply] button to apply Multi-Monitor in the Settings -> Client Settings -> Multi-Monitor interface.

Note:

l This page can only display configuration items of four monitors, even if you have more than four monitors.

l There is no configuration quantity limit for Live Screen, but Alarm Screen and Full Screen can only set one separately.

In addition, you can click [Identify] button to see the corresponding number of each available monitor.

2.1.1 How to Set [None] Mode?

If you don’t want to make any settings with the specified monitor, you can select [None] option and then click [Apply] button to apply [None] Mode.

2.1.2 How to Set [Live Screen] Mode?

Step 1: Select [Live Screen] option for the specified monitor and then click [Apply] button to apply [Live Screen] Mode.

Step 2: Drag the camera which you want to show on the specified monitor from the list on the left and move it into the Live View window, then you can view the real-time video on the specified monitor.

Step 3: If you want to close Live Screen, you can move the mouse to the top of the screen to display the top bar, then you can click the icon and select [Close] button to close it. After the screen is turned off, the monitor will automatically change to [None] Mode. If you want to use Live Screen again, you need to reset [Live Screen] Mode.

2.1.3 How to Set [Alarm Screen] Mode?

Step 1: Select [Alarm Screen] option for the specified monitor and then click [Apply] button to apply [Alarm Screen] Mode.

Step 2: Click [Add] button to add the event rule in the Settings -> System & Servers -> Event Rule Settings interface, then set the trigger type, the source of trigger and schedule you want, and set the action of [Show on Alarm Screen]. After setting the event rule, click [Save] button.

Note:

The following trigger types support the action of [Show on Alarm Screen]:

Front-end Motion Detection, Front-end Audio Alarm, Front-end External Input Alarm, Front-end VCA, ANPR, Record Failure, RTP Packet Loss and Client Trigger.

Step 3: Then the event rule will be added to the event rule list. Click [Apply] button to apply the customized event rule.

Step 4: When the camera is triggered, the real-time video will be played on the specified monitor.

(Note: The picture on the left is Monitor1 and the picture on the right is Monitor2.)

Step 5: If you want to close Alarm Screen, you can refer to Step 3 of 2.1.2 for operation steps.

2.1.4 How to Set [Full Screen] Mode?

Step 1: Select [Full Screen] option for the specified monitor and then click [Apply] button to apply [Full Screen] Mode.

Step 2: Right-click the Live View window for the selected camera, and set Multi-Monitor as [Show on Full Screen] option. Then the Live View window of the camera will be displayed on the specified monitor as Full Screen.

(Note: The picture on the left is Monitor1 and the picture on the right is Monitor2.)

In addition, you can also set the event rule and select the action of [Show on Full Screen] to trigger [Full Screen] Mode. Please refer to Step 2 and Step 3 of 2.1.3 for operation steps.

Step 3: If you want to close Full Screen, you can refer to Step 3 of 2.1.2 for operation steps.

2.1.5 How to Set [E-Map] Mode?

Step 1: Select [E-Map] option for the specified monitor and then click [Apply] button to apply [E-Map] Mode.

Step 2: The E-Map interface will display on the selected screen. Click ”Create” button

to create a new map.

Step 3: You can drag the camera onto the map and make some further settings.

2.1.6 How to Set [Playback] Mode?

Step 1: Select [Playback] option for the specified monitor and then click [Apply] button to apply [Playback] Mode.

Step 2: The Playback interface will display on the selected screen. You can search and play back the recorded files of selected cameras.

Step 3: If you want to close Playback Screen, you can move the mouse to the top of the screen to display the top bar, then you can click the icon and select [Close] button to close it. After the screen is turned off, the monitor will automatically change to [None] Mode. If you want to use Playback Screen again, you need to reset [Playback] Mode.

How to Set VMS Enterprise Event Rules

Introduction

Event rules are used to associate events and actions. Milesight VMS Enterprise supports rich events, multiple actions and alarm modes, which you can combine freely and configure as your need. Every event can be set to trigger many kinds of actions at the same time. Also, every event can be set to trigger different actions in different time periods. After configuring the event rules, when an event is detected, it can promptly remind or automatically trigger actions according to your settings. In this case, focusing on events becomes easier and you won’t miss the events you care about.

By default, some rules have been automatically created for you in the system. These rules are used to notify the abnormalities that may occur in the system. If an event is detected, you will receive a notification in the Notifications panel. It is strongly recommended to keep them. You can also adjust them as needed.

Ⅱ. How to set an event rule

If you’re not an owner or administration, make sure you have permission for event rule settings.

2.1 Add an event rule

Step 1: Click “Settings” -> “System & Servers” -> “ Event Rule Settings”.

Step 2: Click “Add”, set trigger, schedule and action, then click “Save”.

There are many kinds of events and actions. Different events or actions have corresponding settings. Here you can check the below table to know more about them.

Trigger

Action

Note:

When an event is detected, if you want the corresponding camera in live view interface to be prompted with a flashing box, only need to check “Show Flashing Border” in “Settings” -> “Client Settings” -> “Local Settings” -> “Alarm”.

Each event can trigger different actions. If the checkbox of action is disabled, the event doesn’t support triggering this action.

Step 3: After adding event rules, you can see them in the list.

Optional: You can also edit or delete the event rules as needed.

Step 4:

After completing all operations, click “Apply”.“*” means the rules haven’t been saved, don’t forget to click “Apply”.

Ⅲ. Example

Setting

Set the following event rules in the system.

①． From 1 p.m to 4 p.m, when a motion event is detected in “ipc demo”, call “ptz demo” preset and show a notification.

②． From 4 p.m to 6 p.m, when a motion event is detected in “ipc demo”, do recording, show notification and email to user “Test”.

③． When any camera in the system has video loss, show a notification.

④． When any camera in the system fails to record, show a notification.

⑤． When any user login the system, show a notification.

⑥． Add an icon to each camera. After clicking the icon, show text in live view of the camera and push the live view of the camera to display on full screen.

Result

①． From 1 p.m to 4 p.m, when a motion event is detected in “ipc demo”, call “ptz demo” preset and a notification will be shown in Notifications panel.

②． From 4 p.m to 6 p.m, when a motion event is detected in “ipc demo”, a notification will be shown in Notifications panel. User “Test” will receive an email. And you can view the recording in Playback interface.

③． When a camera in the system has video loss, a notification will be shown in Notifications panel.

④． When a camera in the system fails to record, a notification will be shown in Notifications panel.

⑤． When a user login the system, a notification will be shown in Notifications panel.

⑥． After clicking the icon, text will be shown in the live view of the camera.

All events will be recorded, you can view them in Logs interface.

How to Use Record and Playback in VMS Enterprise

Introduction

For a VMS software, Live View, Record and Playback must be the three most important functions. Milesight VMS Enterprise has powerful video recording and playback, which are the critical parts of the forensic process. This document will introduce how to configure and use these two functions in order to solve some doubts and problems in use.

2. Disk Settings

Ensure that one or more of the server’s disks are enabled and have space left before configuring record. In addition to local disks, NAS external storage is also supported.

Select Settings→System&Servers→Server Settings→Storage Management and enable one or more disks to save record. It is recommended that the hard disk is used for storing recordings only. Move the mouse to the capacity bar to display more capacity information of the disk.

3. Continuous Recording

3.1 Enable Continuous Record

Step1 Select Settings→Devices→Camera Record Schedule→Schedule;

Step2 Click Server List or Group List to show devices from different servers or groups. Click one camera to configure this channel’s record.

Step3 By default, the time bars in the schedule have been all selected. Click Select All or Clear All to quickly choose or clear all times. When the time bar is blank, you can select a time period by crossing over it. Click one time period and then you can modify its specific time. Click to copy one day’s schedule to others’.

Step4 Enable Continuous Recording and do not forget to Click Apply to save.

3.2 Continuous Record Settings

Step1 Select Settings→Devices→Camera Record Schedule→Record Settings;

Step2 Click Server List or Group List to show devices from different servers or groups. Click one camera to configure this channel’s record.

Step3 Configure specific settings of the camera after continuous recording is enabled.

Table1 Description of the settings

Parameters	Function Introduction
Record Stream	Set record stream as primary, secondary or both of them
Record Contain	Select whether the record includes audio or not
Pre Record Duration	Set the duration of pre-recording from 1s to 10s
Post Record Duration	Set the duration of post-recording from 10s to 60s
Archive Minimum Retention Time	Set minimum time for recording to expire: Auto(delete the oldest recordings based on the disk capacity); Preset times; Custom time from 1 to 365 days
Archive Maximum Retention Time	Set maximum time for the recording to expire: Auto(delete the oldest recordings based on the disk capacity); Preset times; Custom time from 1 to 365 days
ANR	Set whether to enable ANR which needs a SD card inserted in Milesight camera added via MSSP

3.3 Copy Record Schedule and Settings

Both Schedule and Record Settings support copy one channel’s to others’. We take Record Settings as an example.

Step1 Click Copy to and then check the cameras you want to copy the configuration to.

Step2 You can also see all cameras from different Servers or Groups by selecting Server List or Group List.

Step3 Click Save and you will find the checked cameras’ configuration is the same as the first one.

4. Event Record

Event Record of VMS Enterprise is based on Event Rules. So you need to set it in Event Rule Settings interface.

Step1 Select Settings→System&Servers→Event Rule Settings and click Add to set a new rule;

Step2 Select the event which you want to trigger the recording. We take Region Entrance in Front-end VCA as an example. Then click and all cameras will show up in Server List or Group List. Check one or more cameras as the source and click save.

Step3 Click to bring up the window of schedule. The way to configure it is just the same as it in Continuous Recording. Don’t forget to click Save.

Step4 Check Do Recording or Primary Emergency Recording in Action List. Primary Emergency Recording is based on recording schedule, which should be configured first at Camera Recording Schedule. Trigger primary stream recording when event occurs.

Table2 Description of the settings

Parameters	Function Introduction	Do Recording	Primary Emergency Recording
Target	Set which camera to record: Source Camera(One-to-one means that event from a particular camera triggers recordings of not all source cameras but only this camera when there are more than one source cameras); Custom selected cameras	√	√
Action Interval	Set time interval between two Actions: Instant; 5s; 10s; Custom time from 1 to 3600s	√	√
Pre Record	Set the duration of pre-recording from 0s to 10s	√	×
Duration	Set the duration of whole action: While Trigger Happening; Custom time from 1 to 3600s	√	√
Post Record	Set the duration of post-recording from 0s to 120s	√	×
Record Stream	Set record stream as primary or secondary stream	√	×
Description of Rule	A brief description as needed for easily finding this rule	√	√

Step5 Configure the event record rule as needed and click Save.

Step6 Click Apply to save the rule changes.

Take the following figure as an example, when Panoramic Dome Camera detects Region Entrance, it will trigger recording its video. Don’t forget to click Apply in Event Rule Settings interface.

Note: All front-end triggers should be enabled on Milesight camera side first. You can configure it in Device Events module.

5. Basic Playback

Click Playback on the top. And then the playback interface will show up. Choose and double click a channel from Server List or Group List to replay your recordings. The icon means this channel has recordings to play.

(1) Toolbar on the top

Move your mouse to the video, and then the toolbar will show on the top.

Click to turn on Speaker, and you can adjust the volume of the speaker from 1~100. This item is available only for cameras which support built-in mic or Audio I/O.

Click to enable digital zoom. A thumbnail of the enlarged position is displayed in the lower right corner. Mouse dragging and wheel scrolling to move and zoom in/out.

Click to take a snapshot. The blue text will lead you to the snapshot storage path.

Click to open the Fisheye toolbox. Here are a list for each icon of Fisheye toolbox.

Click to close this channel’s playback.

(2) Right-Click Menu

Right click the video and the menu will show up.

The meanings of the items on the right-click menu can be referred to the table below:

Item	Description
Stream Type	Auto, Primary and Secondary supported. Auto means the playback video will automatically switch stream according to computer performance.
Display Info	Choose to display stream information at Left or Right, or customize the position of info. You can also hide the stream information.
Split Playback	Divide the video files into several channels during specified time period. Users can watch playback videos of different time periods simultaneously.
Add Tag for	Add tag for the selected cameras or all cameras in the playback panel.
Remove	Choose Selected Views or All Views in Layout to remove the camera playback.
Save As Layout	Click it to save the current layout to Layouts list.
Cell Spacing	Set the cell spacing size among the live view windows in the layout. There are four options available, including None, Small, Normal and Large.
Aspect Ratio	Choose 1:1, 4:3, 16:9, 3:4 and 9:16 to show the window aspect ratio.
Pause/Resume all	Pause/Resume all playback in the current layout.
Turn on/Mute All Speakers	Enable or disable the speakers of all cameras in the current layout.
Stream Type for All	Set stream type for all cameras in the current layout.
Display Info for All	Set to display stream information of all channels in the current layout.
Full Screen	You can choose Layout to display all cameras in the layout to full screen. Click again the Exit Full Screen to restore the normal window.

Right click on a position in the layout where there is no video and the menu will change into:

There are two more items:

Add Tag for All	Add tag for all cameras in the playback panel.
Remove All Views	Remove all cameras’ playback from this layout.

(3) Playback Toolbar

Select a certain channel in the current layout and click to show the calendar. The blue date and time both indicate availability of recordings. Click the date and time you want to locate to.

Clickto lock recording file, and you can set locked time duration and notes.

Click to add tags for selected channels, and you can set tag name, note and time duration.

Click to show Archive Management which can be used to check and retrieve tag and lock files.

Click to switch to Asynchronous Playing or Synchronous Playing.

Asynchronous Playing: The timeline only represents the recording of selected channel.

Synchronous Playing: Playback all channels in the current layout synchronously. The thick timeline bar represents recordings of currently selected camera, while the thin bar represents recordings of all channels in the current layout.

Click /to play previous or next event video.

Click/to play previous or next frame of the recording.

Click/to adjust the playback speed to 1/32, 1/16, 1/8, 1/4, 1/2, 1X, 2X, 4X, 8X, 16X or 32X.

Click//to rewind, play or pause the video.

Clickto move the current playback time to the center of timeline bar. The short white vertical line which represents the position of the current playback moment will move to the centre of the time bar.

Dragto zoom in/out timeline bar. Or you can just scroll the mouse wheel on timeline bar to do so.

(4) Right-Click Timeline Bar

Right-Click the timeline bar and hold down to drag to move the time bar sideways.

Right-Click the timeline bar, the menu will show up as follows. If there has been a part of video selected and it contains locked video and tags, right-click menu will have more items.

The meanings of the items on the right-click menu can be referred to the table below:

Item	Description
Start Selection/End Selection	Select start/end time of period on the timeline.
Clear Selection	Clear selection on the timeline.
Zoom to Selection	Extend the selected period to whole timeline.
Add Tag	Add tag for the selected period.
Lock File	Lock the selected period.
Split Playback	More Details in 6.2 Split Playback
Export Video	Export the selected period.
Unlock File	Unlock the locked video file.
Edit Tag	Edit tag which you set.
Export Tag	Export tag which you set.
Play Tag Video	Play videos with tag you set.
Delete Tag	Delete tag which you set.
Show Thumbnails	Show thumbnail of the corresponding time. Users can also resize the thumbnail timeline as needed.
Show Tags	After setting the tags, you can choose the option to show the tag on the timeline
Show Locks	After setting the lock files, you can choose the option to show the lock file on the timeline

(5) Tags for Playback

Click the Hide/Show bottom to pop-up right side menu and click the tag icon to show Tags for Playback.

Select which channels to search tags from.

Select which types of tags to search.

Select the time duration for searching tags

Search keyword of tags’ names and notes. Refresh the tag list and chose how to sort the tag list (Tag Start Time, Tag Name, Camera Name and Create Time).

Double click the tag you want, and the video of the corresponding channel then jumps to the time of the tag and flashes the window.

6. Event and Split Playback

(1) Event Playback

If the channel is configured with rule-triggered recording, the timeline bar of Playback will have different colors representing different events.

Click Show Event Mask to check event type to be shown on the timeline, the timeline will show different colors according to selected event type as below:

Click the button to enter Event Mask Colors Setting interface, it supports customizing different colors for different events according to the user’s requirement.

Click Event Only to exclude continuous recording.

(2) Split Playback

Split Playback allows you to divide a period time of recording into several parts when watching playback, so that users can watch videos of different time simultaneously.

Split Playback setting steps are as below:

Step1: Right click the playback window of a channel and click Split Playback, or right-click the selected time period on the timeline and choose Split Playback, and a window will pop up.

Time Period setting

Specific Number setting

Step2: Check a type to split the video file. If you choose the Time Period, and set Time Interval and Start/End Time, then the channels will be split automatically by VMS system as above. If you choose the Specific Number, and set channel number and Start/End Time, then Time Interval will be calculated and split automatically by VMS system as above.

Step3: After setting, click, and the selected video will be split to new channels to replay asynchronously on the playback layout as shown below:

How to Use VMS Enterprise Video Wall

“Milesight VMS Enterprise” supports Video Wall function, which is a necessary advanced function for professional VMS. The Video Wall function supports custom screen combinations and split. It can divide a single monitor into multiple screens, which can be divided into up to 4 screens, or combine multiple monitors into one screen. It controls the maximum number of screens that can be run with a license. If the number of screens connected to the client computer is large enough, more screens can be generated. Moreover, the screens generated by the Video Wall are independent of each other. In particular, the Video Wall function can push the computer desktop to the wall.

Here are some professional terms related to Video Wall, so that you can better understand the function.

Monitor

Refers to the monitors actually connected to the client computer.

Screen

Refers to the areas created based on monitor for displaying video.

Video Wall

It’s made up of screens.

Matrix

It is composed of the contents and layout displayed on the Video Wall screen.

Chapter II Operations

2.1 How to Set Video Wall?

Note：

① Make sure that there is a license for Video Wall in the system, and the license quantity is sufficient.

② Make sure the Video Walll Server is installed and running on the Client you want to connect to.

Step1: First, click the button [Creat Video Wall] to create the Video Wall in the Settings -> System & Servers -> Video Wall Settings interface.

Then you can click to rename the Video Wall.

Step2: Click the button to pop up the Add Screens window, and all Clients in the LAN will be displayed in the list. You can refresh the list and search the Client.

Step3: Then select the Client whose screen does not exist in the current Video Wall in the LAN from the list, and click the button. You can also add multiple Online Clients as needed. Then these added Clients will be displayed in the Screen Setting list. And all monitors actually connected to these Clients will be displayed on the Clients.

You can refresh the Screen Setting list and search for the added Clients. If you want to delete the Client, you can click the button.

Step4: Click on a blank area of a monitor on the Client to create a new screen, then you can click and drag the screen to adjust the position. And the screen selected box has 8 small squares that you can drag to adjust the screen size. Each monitor can be divided into up to 4 screens.

In addition, you can click the screen and then click the screen name to rename it, and delete the screen by clicking the icon in the upper right corner of the screen.

Step5: Click the screen you want, and then click the button to add the screen to the Video Wall. You can add multiple screens as needed.

You can click and drag any screen on the Video Wall to adjust the position, and drag the small squares of the selected box to adjust the screen size. Click the icon to delete the screen on the Wall. And you can also adjust the layout of the Video Wall by clicking the icons or sliding the mouse wheel.

Step6: Click the button to apply the settings.

Step7: Then click the button to run the Video Wall. And then you can use Video Wall function in the Live View interface.

When the Video Wall is running, you can still click and drag any screen on the Video Wall to adjust the screen position and size, which is convenient to match the actual physical position composition of each screen.

In addition, click the button to identify the corresponding screens. And you can click the button to stop running the Video Wall. Or click the button to delete the Video Wall.

2.2 How to Use Video Wall?

The Video Wall list created in the Video Wall Settings is displayed in the left Resource panel of the Live View. And you can use all screens in the local area network.

Note:

The icon indicates that the screen is not available, you need to check if the Video Wall Server is running normally.

2.2.1 How to Run Video Wall?

Step1: Right-click the Video Wall and a menu window will pop up as below:

[Control Video Wall]: Pop up the Video Wall control window to use the Video Wall.

[Start Wall]: Run the Video Wall.

[Rename]: Rename the Video Wall.

[Video Wall Settings]: Jump to the Video Wall Settings page.

Step2: Select [Control Video Wall] option, and then the following window pops up:

Step3: Click the button to run the Video Wall. Then you can drag and drop the cameras, layouts and tour plans to the screens.

After running the Video Wall, you can also do the following:

l Click the button to identify all running screens in the Video Wall.
l Click the button to clear the content on all screens in the Video Wall.
l Click the button to stop running the Video Wall.

In addition, you can double-click the screen to enter the specific screen. And you can also right-click the screen to do something. For more details, please refer to How to Run Screen?.

Step4: When the Video Wall is running, you can right-click the Video Wall and a menu window will pop up as below:

[Control Video Wall]: Pop up the Video Wall control window to use the Video Wall.

[Stop Wall]: Stop running the Video Wall.

[Clear Wall]: Clear the content on all screens in the Video Wall.

[Rename]: Rename the Video Wall.

[Save Matrix]: Save the content currently playing on each screen of the Video Wall. For more details, please refer to How to Save and Load Matrix?.

[Identify Screens]: Identify all running screens in the Video Wall.

[Video Wall Settings]: Jump to the Video Wall Settings page.

2.2.2 How to Run Screen?

Step1: Right-click the screen and a menu window will pop up as below:

[Control Screen]: Pop up the screen control window to use the screen.

[Start Screen]: Run the screen.

[Rename]: Rename the screen.

Step2: Select [Control Screen] option, and then the following window pops up:

Step3: Click the button to run the screen. Then you can drag and drop the camera, layout and tour plan to the screen.

After running the screen, you can also do the following:

l Click the button to refresh the screen.
l Click the button to identify the corresponding screen.
l Click the button to clear the content on the screen.
l Click the button to stop running the screen.

Step4: When the screen is running, you can right-click the screen and a menu window will pop up as below:

[Control Screen]: Pop up the screen control window to use the screen.

[Stop Screen]: Stop running the screen.

[Rename]: Rename the screen.

[Clear Screen]: Clear the content on the screen.

[Identify]: Identify the corresponding screen.

[Push My Desktop]: Push the desktop to the screen for display. If there are multiple desktops, select any one to push as needed.

2.2.3 How to Save and Load Matrix?

Step1: Right-click the Video Wall and select [Save Matrix] option to save the content currently playing on each screen of the Video Wall. The Save Matrix window will pop up, you can edit the matrix name, and then click the button .

Note:

Make sure the Video Wall is running.

Step2: Then right-click the matrix and a menu window will pop up as below:

[Load to Video Wall]: Each screen will play the content according to the matrix.

[Save]: Save the content currently playing on each screen of the Video Wall to the matrix.

[Rename]: Rename the matrix.

[Set As Default]: Set the matrix as default. Every time you run the Video Wall, each screen will play the content according to the matrix. There is at most one default matrix.

[Delete]: Delete the matrix.

Step3: Select [Load to Video Wall] option, and then the following window pops up:

Click the button , and then each screen will play the content according to the matrix.

VMS Enterprise Architecture

Chapter I Introduction

The Milesight VMS Enterprise is featured with Client/Server architecture. The user accesses a system by logging into any server of the system on the client side.

l Server

Server refers to Milesight VMS Enterprise Server which are installed on the computer. The initial state of a server is an undefined server. Available on Windows.

A server is responsible for:

Communicate with clients and other servers (Only master server)
Camera management
Get video stream from cameras and forward to client
Record video from cameras to local or NAS storage
Get event signals and trigger different actions
Smart analysis – Store license plate recognition results and black/white list comparison

Recommend: The maximum number of cameras per server is 128.

l System

Icon

A system is made up of one or more servers. Any undefined server needs to be created as a new system or added to an existing system for use.

Multiple servers can form a system which can manage lots of network cameras in different locations. Every server in the same system shares all information about all cameras, users and settings except for recording files.

Recommend:

The maximum number of cameras per system is 2000. The maximum number of servers per system is 25.

l Client

Client refers to Milesight VMS Enterprise Client which are installed on the computer. Available on Windows.

A client is responsible for:

Connect to any server, but only to one at a time
Camera management, configuration and control
View Live videos, up to 4 monitors and 64 channels per monitor
Video playback, up to 64 channels synchronously or asynchronously
Smart analysis – Black/white list management, ANPR settings and smart search
View event notification
System and server settings
View event logs and audit trail

Note: D3D is required

l User

Every system has a list of user accounts that can have different rights. Only authorized user can access the system. Users are authorized by roles, and there are different types of roles.

Owner: There is only one ‘Owner’ user in the system. It is created when the system is created. It has the highest privileges

Administrator: It owns full access to function and operation permissions, resource access including Camera and Layout

Operator: It can see all cameras and own part access to function and operation permissions in the system

Viewer: It can see all cameras and have view permissions for only partial functions in the system

Custom role: Customize access permission to function, operation and resource including Camera and Layout

Recommend: The maximum number of users per system is 100.

l Login Interface

Interface Description:

Chapter II Operations

2.1 How to add an undefined server into a system

1. Add an undefined server into a new system

Step 1: Click an undefined server in the login interface. (Undefined servers are shown at the bottom of the list.)

Step 2:Select “New System”to create current server as a new system. (“New System” is shown at the bottom of the selections.)

Step 3:Set the system name, server name and an “Owner” user of the new system, then click “Save”.

You can check “Connect After Save”, then it will log in the system automatically after clicking “Save”.

2. Add an undefined server into an existing system

Step 1:Click an undefined server in the login interface.

Step 2: Select an existing system.

Step 3: Configure server name and enter the owner’s authentication credentials of the system, then click “Save”.

You can check “Connect After Save”, then it will login the system automatically after clicking “Save”.

Note: If the password is entered incorrectly more than 6, the system will be locked for 30 minutes.

2.2 How to detach a server from a system

Step 1:Click “Settings” in the top menu bar. And Click “System & Servers” -> “Server Settings” in the left menu bar. Select the sever in the server list, click “Detach Server”.

Step 2: Click “I Agree”.

If there are multiple servers in the system, you can choose to remove or keep the cameras added to this server.

l Remove cameras of this server from system: after detaching the server from the system, the cameras added to this server will be deleted at the same time.

l Keep cameras of this server in system: after detaching the server from the system, the cameras added to this server will be allocated to other servers of the same system automatically for load balancing.

After detaching the server from the system, then it becomes an undefined server.

Note:

1．Only the Owner user has permission to perform the “Detach Server” operation.

2．When a server is offline, if you click “Delete Server”, the server isn’t really detached from the system. It just doesn’t be shown in the server list. Once the server restores online, it still can be displayed in the server list and start working.

If a server has been added into a system, it needs to be detached from the system as an undefined server, then add the undefined server into other system.