O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.

If you can’t find the QR code or can’t scan the QR code, please select Wireless camera.

3. Make sure your O-KAM Pro camera is ready to connect, the camera light is flashing or you hear the prompt “Please use the app for Wi-Fi configuration”.

Note: If the light is not blinking or there is no prompt tone, please reset the camera.

Then click ‘I heard the prompt tone or see the indicator light flashing’, go to the next step.

4. Enter your wifi password, then click Next.

Please choose 2.4G wifi, some O-KAM Pro cameras only support 2.4G wifi.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

5. Make sure your wifi is 2.4g and the wifi password is correct, then click Confirm. Give the displayed QR code to the camera to scan.

Place the QR code about 15-30 Inch in front of the camera to scan, and complete the scan after hearing the “beep” sound.

After the connection is successful, it will automatically jump to the next step.

After successful connection, you can test the wifi signal strength, or later in the test, please put the O-KAM Pro camera in the location with strong wifi signal.

The app will prompt you to subscribe, it is recommended to cancel, if you need cloud storage, make sure the O-KAM Pro camera can work properly before subscribing.

AP Mode Connecting O-KAM Pro Camera

If the QR code connection fails or the QR code cannot be scanned, you can try to connect the O-KAM Pro camera using AP mode.

1. Go to your mobile phone’s wifi list to connect to the hotspot wifi of the O-KAM Pro camera, return to the O-KAM Pro APP after the connection is successful, and then the app will auto add the camera.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

2. Go to Settings, select Device Settings, and then click Wi-Fi network.

3. Select your wifi, then enter your wifi password, click Confirm and wait for O-KAM Pro camera to connect to your wifi.

Share O-KAM Pro Camera

Once you have connected the O-KAM Pro camera, if you want your family or friends to use the camera as well, you need to share the camera with your friends via the Share function.

1. Go to the Share screen, then send the QR code to your friend.

Permission Settings:

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

2. Have the invitee download the O-KAM Pro APP and register and login, then click + scan the QR code to add a camera.

Connecting O-KAM Pro Camera without a router

If you want to use O-KAM Pro camera without internet or router, you can connect to the included hotspot wifi to use the camera.

This mode only supports close range use.

1. Go to your mobile phone’s wifi list to connect to the camera’s hotspot wifi, after connecting, return to O-KAM Pro, the app will auto add the camera, then you can start to use it.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

Function setup – Wired O-KAM Pro Cameras

The functions of different types of O-KAM Pro cameras differ slightly, so please check your camera type.

If your camcorder needs to be connected to the power supply at all times to work, then it is a wired O-KAM Pro camcorder type, please check the function setting instructions below.

Recording Setup – Wired O-KAM Pro Cameras

O-KAM Pro camera supports cloud storage and memory card recording, cloud storage requires subscription, the following memory card recording settings.

You need to insert the memory card to record, the recording will be saved in the memory card, after inserting the memory card, the camera will sound a voice prompt.

The default is to start 24 hours recording, you can change the recording mode in TF Record Settings.

O-KAM Pro camera supports the following recording modes:

If the memory card shows abnormality, please try to format the memory card and reboot the camcorder.

View Recordings – Wired O-KAM Pro Cameras

In the live video interface, click TF Card in the lower right corner to view the video saved in the memory card.

Motion Detection Setup

Activate the Motion Detection function in the Monitoring Function, O-KAM Pro cameras support Motion Detection and Human Detection.

Motion Detection

When the camera detects an object moving, it will send an alarm notification to your mobile phone.

This mode may have a high false alarm rate, if you need to detect only suspicious people, we recommend you to choose Human Detection.

Human Detection

The camera will send alarm notifications to your mobile phone only when it detects humanoid objects.

Activity Zone Setup

Setting the detection area allows the camera to detect a specific location, reducing the chance of false alarms.

Smear the area you don’t need.

Detection schedule

Customize the schedule of Motion detection, reduce false alarms. The camera automatically monitors for you during the scheduled time.

Alarm flashing light

After the alarm flashing light is turned on, the camera will automatically flash when motion detection is triggered.

Camera Siren

When Alarm sound switch is turned on, the camera will emit alarm sound when motion detection is triggered, you can choose alarm sound or record your own sound.

Enter Notification Settings, select Camera Siren and then turn on the Alarm sound switch.

Email notification

An email will be sent to you when a motion is detected.

Click Add an email , then enter the email address you want to receive alarm notification and finish the setting.

Auto Tracking

When Person tracking is activated, the camera will Auto Track people’s movements and monitor all activities. It will automatically switch to and focus on the person when they enter the camera’s field of vision.

This feature is only supported by O-KAM Pro cameras that support PTZ.

Human frame

People are automatically framed in the live video Help you filter out motions of other objects and quickly follow the person’s movement.

Night vision setup

O-KAM Pro camera defaults to black and white night vision mode, you can change the night vision mode in Device Settings, Night Vision.

Only cameras with dual light sources support this feature.

Reset O-KAM Pro Camera

Press and hold the O-KAM Pro camera reset button for 5 seconds to reset the camera.

.

O-KAM Pro Camera FAQ and Troubleshooting

You can find here how to fix O-KAM Pro camera can’t connect to wifi, offline and not working problems.

.

Why is my O-KAM Pro Camera offline?

O-KAM Pro camera is offline, it means the camera can’t connect to the network properly, please follow the steps below to fix the offline problem:

Is the router working properly?
Connect your mobile phone to the router Wi-Fi, switch off the mobile data, can you access the internet normally? If it is not normal, try to restart the router.

Whether the WiF strength is full or not
Put the mobile phone to the camera installation location, detect whether the Wi-Fi signal is full? If the signal is weak, it is recommended to adjust the distance from the router to the camera.

Whether the O-KAM Pro camera is normal
If a memory card is inserted into the O-KAM Pro camera, power off the camera and remove the memory card, then check if the camera works properly.

Replace the power supply with another one.

If none of the above solves the offline problem, try resetting the camera and reconnecting it.

Why does O-KAM Pro camera keep showing that it is connecting?

.

See also  How To Setup O-KAM Pro camera(Complete Manual)

.

You can also try:

If it’s a 4G O-KAM Pro camera, please detect if the SIM card’s is in arrears.

.

.

Why add cameras to an NVR?​

.

Before you start…​

Before anything, to be able to add your IP cameras, you need to make sure that:
.

.

How to connect an IP camera to a Hikvision NVR 5

How to add your cameras using the V5 GUI…​

Step 1:​

Open a web browser and enter the IP address of your NVR in the address bar. If you are not sure what this is, use the SADP tool to find it.​

Step 2:​

Log in to the NVR using the “admin” username and password you have set on it.​

Step 3:​

Go to: Device Access > Device Configuration > PoE Settings​

​

If you are connecting your camera via the Plug-and-Play method, then make sure that Network Camera Plug-and-Play is enabled on the POE port you will be connecting the camera to on this page.​

​

For any camera with a cable run under 100m, leave the Network Cable Distance as Short Distance.​

​

If you are connecting your camera manually by IP address, disable the Network Camera Plug-and-Play option for the channel that you plan to add the camera to.​

Step 4:​

Go to: Device Access > Device > Video Device​

​

For any Plug-and-Play camera, just make sure that it is in its inactive default state and then connect it to the port you reserved in step 3. After 20 seconds or so, the camera Status should turn to Connecting and then Online (you may need to click on Refresh to see this).​

​

For Manually added cameras, if you can see the camera in the List of Online Devices section, then just tick the box for the camera and then click + Add to Device List, which will then automatically add it to one of the channels you disabled Plug-and-Play on in the last step.​

Alternatively…​

Click on +Add at the top of the page and fill out the fields as follows:​

​

IP Address: Enter the IP address of your camera, using the ‘Test’ button to verify there is a camera at that address. ​

Device Name: This can be anything you like, as it is the name the camera will show with on your NVR. ​

Protocol: Select the camera’s manufacturer from this list, or failing that, use the ONVIF protocol (your camera will need to have ONVIF enabled for this to work). ​

Management Port: Enter the Server port set on the camera, which you can find in the SADP tool or in Network>Basic Settings>Port in the camera’s web browser interface. If you haven’t changed this, it is usually 8000 by default. ​

User Name: “admin” or the username of any other users set up on that camera. ​

Password: The password set with that user on the camera – if this is the same as the ‘Default Activation Password‘ you have set on the NVR, then you can tick this box instead. ​

Transfer Protocol: ‘Auto’ is normally best. ​

​

When these are completed, click OK.​

​

Your camera should then appear in the list of devices with an assigned channel, and an Online status, meaning it has been successfully added.​

.

.

Extra tips…​

How do I reset my Hikvision device to factory settings?

In some cases, you’ll need to reset your Hikvision device to its inactive factory state. This could be if you’re passing the system on to somebody else; if you’ve forgotten your password; or simply if something has gone wrong during the configuration, meaning you need to start afresh.

There are a couple of ways of doing this, the method you’ll use depends on whether you have a password to log into the device.

Please see the simple steps for doing each below:

Via the device’s backend in a web browser or iVMS-4200:

If you are able to log into your device’s configuration menu in iVMS-4200 or the web browser interface, then the easiest way to reset it is on the Upgrade & Maintenance page here. The steps below show you how to find this page in both interfaces.

Step 1:

iVMS-4200:

In a web browser:

Step 2:

In both iVMS-4200 and a web browser:

Factory reset by using the device’s pushbutton:

On the majority of Hikvision’s newer camera models, there will be a pushbutton on the camera which will allow to carry out a hard reset without needing to log into it. This is most useful when you have forgotten your password, as it allows you to set a new password on the camera while avoiding much of the faff involved in doing this through the SADP tool.

Step 1:

​

Step 2:

1. Disconnect the camera’s power supply.
2. Press the reset button and keep it held down.
3. Restore the power supply while continuing to hold down the button.
4. Keep the button pressed for a further 10 seconds.
5. Release the button and wait for the camera to reboot.

.

The app’s home screen allows you to see all your cameras’ latest activity at a glance, so you can quickly identify any potential security threats. The events gallery allows you to view all your cameras’ events at once or individually, making it easy to track activity over time.

With quick access to live streaming, you can now monitor your property in real-time, giving you peace of mind when you’re away. The app also provides important information on each camera’s status, allowing you to better manage and maintain your cameras.

The VOSKER® Sense AI Tools ensures that you receive notifications that matter to you. With advanced motion detection, you can customize alerts to receive notifications on your phone only when a person or vehicle is detected. This feature also reduces false notifications, so you’re not constantly bombarded with unnecessary alerts.

VOSKER cameras use 4G-LTE cellular network and are not compatible with Wi-Fi. To activate your camera with the supplied SIM card, you’ll need a VOSKER data plan, and you’ll need one plan for every camera on your account.

Take your surveillance efforts to the next level. Download the VOSKER mobile app today and experience the ultimate in remote area monitoring.

ACCESSING YOUR ACCOUNT

Use your login credentials to access your VOSKER account from the web browser. To access your account from your mobile, you will need to download the VOSKER app from Google Play Store (Android) or Apple App Store (iOS). You can modify your personal information or add other cameras to your account from either the web browser or the mobile app. You can also add other users, however, you must share the same email address and password.

HOW CAN I BUY A PLAN?

If you are using an Android phone, you have the option to purchase a plan either from your VOSKER mobile app or from the web browser.

For iOS users, you will need to access your VOSKER account from the web browser to purchase a plan.

VOSKER MOBILE APP :
To purchase a plan from your VOSKER mobile app,

VOSKER WEBAPP :

Once you login to your account, follow the steps below to purchase a plan:

*Remember that you can save up to 10% when you select a yearly plan!

.

VOSKER APP setup and User guide

HOW DO I HAVE ACCESS TO THE FREE PLAN?

V150
V150 comes with a 7-day free trial of our Elite plan that will give you unlimited photos and 40 HD photos for those 7 days. After your trial period is over, you’ll need to purchase a plan in order to keep receiving photos in your VOSKER mobile app. Photos will still be saved to the MicroSD card of your camera.

V200 and V100
You will receive a 30-day free trial of the Elite Plan where you will be receiving unlimited photos and can request up to 40 HD photos. After the first 30 days of activation on the unlimited plan, your camera will automatically transfer to the free plan where you will receive up to 100 photos a month. You can purchase a paid plan any time after the 30-day trial period is over.

HOW CAN I DOWNLOAD HD PICTURES ON MY PHONE?

Users are now able to get HD versions of their most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.
*except for the FREE plan

On the right top corner of each of your pictures you will find an HD icon. Click and your picture will start uploading.

View of the Mobile App:

HOW TO CHOOSE THE RIGHT TRANSMISSION PLAN FOR MY SECURITY CAMERA?

Cellular security cameras are great for monitoring your property remotely. A notification pops on your phone, and you see somebody lurking around the construction site, the farm or the marina.

This system relies on the data plan you will pick and the number of photo alerts included. But how do you know how many alerts you will need? We listed points to consider when buying your data plan.

Photo count

First, consider how many alerts you expect the security camera to send in a month. Since the data plan works off of a monthly allotment, having a rough estimate based on the 7-day free Elite trial is a good place to start.

Location may come into play. The number of photo alerts may vary if you installed the camera in an empty yard or at a busy security gate. How many times will people or vehicles pass in front of it daily? Also, consider other elements moving in front of the camera, like animals, objects, and weather conditions.

Settings

On top of this first estimation, you must factor in your camera settings preferences in the VOSKER app.

How many alerts are you ready to miss?

The camera saves photos on the memory card when you reach the monthly photo alerts. You will no longer receive any alerts in the app until the photo count is reset in the next monthly cycle or unless you upgrade the plan. It all comes down to your tolerance of missing information.

Test it

A great way to evaluate your needs is to get a monthly Elite plan for your newly installed camera. Test the settings to fit your objectives and monitor the photo count. Once the setup is steady, and you get a good idea of the photo alerts, it is time to pick the best plan and frequency.

Remember: you can save 10% off the monthly fee by purchasing the data plan annually.

Flexible

You may use your security camera at different locations or for different purposes within a year, affecting the number of photo alerts you need. Remember, you can upgrade or downgrade a monthly data plan*. It is also possible to suspend its auto-renewal if you need a break.

You now have all the tools to make the best decisions for your surveillance solution.

*Annual plan can only be upgraded with extra charges.

WHAT CAN I DO TO INCREASE MY PHOTO QUALITY?

Understanding the different features and specifications of the VOSKER cameras can help you choose the right camera at different locations on your property that will give you optimal photo quality. If you intend to set up the camera in a place where the objects are moving fast, choose a camera with a faster trigger speed to ensure the camera activates and captures the photo before the object moves out of the frame. Cameras that have a larger motion detection range are a better choice when you want to set up the camera over larger areas.

Here are a few things that you can do to improve the quality of your photos:

.

WHY DOES THE RESOLUTION ON MY PHOTOS SEEM TO BE LOW?

The photos that your camera is sending have been compressed to facilitate the transfer. You will find the best photo quality directly on the SD card inside your camera. You can also get HD versions of your most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.

On the right top corner of each of your pictures, you will find an HD icon. Click and your picture will start uploading. *except for the FREE plan

WHY DO MY PICTURE COLORS LOOK WRONG?

If the color of your photos looks different than normal, E.g., Pink or Black photos, check the following:

CAN’T LOGIN TO MY VOSKER ACCOUNT.

If you are having issues logging in to your account, verify the following:

STEP 1

STEP 2

STEP 3

If following the steps above did not resolve your issue, please contact VOSKER support team for assistance.

HOW TO CHANGE MY CAMERA SETTINGS FROM THE VOSKER APP

To change your settings for your VOSKER camera, navigate to the “Settings” tab. Make sure to choose the correct camera from the dropdown option at the top. You will see 3 sections: Basic, Cellular Setup, and Advanced Options. You can change the settings under these sections according to your preference and select the “Apply Changes” button to save the settings.

Note: Our cameras communicate with our servers based on the frequency set in your settings. For example: If your Transfer Frequency is set to 2 times a day, this means that your camera will communicate with our servers 2 times a day.

VOSKER SENSE

VOSKER SENSE is a tool that uses artificial intelligence and enables you to easily differentiate between a human and a vehicle in a photo. All our plans, except the Free plan, include VOSKER® AI Tools. So, make sure you are on one of our paid plans. To use this feature,

HOW TO DELETE CAMERA FROM ACCOUNT

HOW CAN I SHARE MY PICTURES WITH SEVERAL PEOPLE?

WHAT IS THE RESOLUTION OF THE TRANSMITTED PHOTOS?

V200

V150 and V100

.

The Optiview VMS supports IP/Megapixel cameras, Analog, HD-over-Coax and IP/Network recorders. Another aspect of this powerful system is the fact that the 64-channel preview screens can be opened in up to 4 windows for live viewing up to 256 channels at the same time.

While all cameras will record on their local recorders, the VMS allows for up to 16 channels to record locally on the home or work PC. 36 channels can be chosen for playback in increments of 24 hour periods.

.

SOFTWARE DOWNLOADS

Right-click and select “Save Link As”

OTHER DOWNLOADS

VMX SERIES SUPPORT

Downloads / Files / Support

Welcome to the comprehensive support page for the Optiview VMX video monitoring platform. This platform, offering both VMX and VMX+ versions, is a potent, integrated solution for single and multi-site surveillance and access control systems. Whether you’re a first-time user or seasoned expert, we’re committed to ensuring that your experience with the Optiview VMX platform is seamless. This page is your hub for downloading all the necessary software and related materials for the Optiview VMX system. As always, if you need more in depth support, call our US based text support line at 904.855.1121.

.

OPTIVIEW VMX

INTEGRATED MULTI-SITE MANAGEMENT SYSTEM

for Single and Multi-Site Surveillance and Access Control Systems

OVERVIEW

The Optiview VMX and VMX+ remote viewing platforms are both powerful, all-in-one professional, project level video surveillance management software. The Optiview VMX Client can be downloaded for free, and will support up to 64 network cameras and intercoms, and supports 1 user account. View up to 512 cameras and 256 Video Intercom devices, integrate multiple access control units, and access advanced analytics by upgrading to the Optiview VMX+.

The Optiview VMX/+ provides user rights management, device management, alarm management, video wall output, and two-way audio. In addition to these VMS features, Optiview VMX/+ offers advanced features, including support for real-time face recognition and robust event management controls.

FEATURES

SOFTWARE DOWNLOADS

OTHER DOWNLOADS

To view the product pages for Optiview VMX Free and VMX Plus click the link below:

Optiview VMX Free

Optiview VMX+

COMPATIBILITY

Optiview VMX is compatible with all Optiview IP-enabled devices: network cameras, NVRs, DVRs, video intercom devices, and access control devices. The server is also compatible with the ONVIF protocol, so it can connect to ONVIF-enabled third-party devices, such as some of Optiview’s third party manufacturers. Call your account managers to talk about our compatability matching.

PLAYBACK

The Optiview VMX platform allows for quick and easy playback of surveillance footage from both the Live footage interface, and the Playback interface. Users can search by time, date, or event type. Users can also zoom in on the timeline, and drag through the timeline with video scrubbing. Download multiple video files at a time, take single frame snapshots, or a ‘burst’ of snapshots.

SMART SEARCH

Search through your surveillance footage quickly and efficiently by using Smart Search, and targeting the area of the screen where motion would have occurred.

INSTANT PLAYBACK

Thought you saw something? Click “Instant Playback” for an immediate jump back in time to 30 seconds in the past to re-review your surveillance footage.

MULTI-MONITOR SUPPORT

Take advantage of complete multi-monitors support.

ADVANCED REPORTING

The Optiview VMX supports heat map, people counting, ANPR license plate capture, attendance and access control reporting.

FLEXIBLE & SCALABLE

Optiview VMX+ supports up to 512 video channels, which includes up to thirty two (32) face recognition cameras. Easily add multiple recorders, cameras, and access control devices from a single-site or from multiple locations around the world.

FISHEYE CAMERA SUPPORT

The software features full support for Optiview Fisheye cameras. The software supports options for the Fisheye camera installation and supports dewarping Optiview’s 360° panoramic fisheye cameras in both live view, and in playback. Because dewarp happens at the software level, the video is always recorded in full fisheye, even if the live view is being dewarped. This allows viewers to see the entire video, and dewarp sections of the video at any given time.

Fisheye

Fisheye Dewarp X4

Fisheye Dewarp X8

REAL-TIME FACE RECOGNITION

The Optiview VMX/+ performs real-time facial recognition on up to two (2) / thirty two (32) channels simultaneously. The software captures and analyzes facial features to determine gender, age, expression, glasses, mustache, and mask, and then can record the faces and store the associated structured data. The server also filters incoming video to display faces that match target features. Facial recognition requires a camera that supports this feature.

ACCESS CONTROL & VIDEO INTERCOM

Optiview VMX offers full support and integration for access control and video intercom products to support a complete security and surveillance system. The server monitors door status and events, manages access rights, and support advanced rules management. In addition to access controls, the server supports two-way communication between intercom and control center.

MANAGEMENT OPERATIONS

The software manages the devices and the user accounts for an entire organization. Operators can assign different camera ranges, active use periods, and business roles for each user. The server also supports different schemes for various events, including IVS, to record and view all event history information.

VISITORS

Quickly register and customize access for visitors.

LPR

Capture license plates in a searchable database.

EMAP

Easily select cameras to view on map.

USERS

Create up to 100 Users per VMX Server.

EVENTS

Track entrance / exit, alarms, access, and more.

.

FREQUENTLY ASKED QUESTIONS

WHAT ARE THE MAJOR DIFFERENCES BETWEEN THE VMS AND THE VMX?

The Optiview VMS and the Optiview VMX are both multi-site remote monitoring software that can be used to view cameras and devices from a centralized location. The VMS is ideal for residential and commercial use, where basic camera surveillance is the primary need. The VMX, however, has an advanced access control module, and can support advanced surveillance such as facial recognition, traffic density, ANPR license plate database capture, and more. See which software is right for you here!

WHY DO I HAVE TO START USING THE VMX?

The free Optiview Video Management Software (VMS) is our legacy remote viewing software, and will no longer be supported going forward. Instead, download our all new Optiview VMX, our powerful new remote viewing software; The user is able to choose between a free VMX, and a more advanced VMX+ with additional features. The new VMX and VMX+ provide a more stable management and viewing platform for CCTV and Access Control, as well as providing many new features. Not sure which solution is right for you? Contact an Optiview Account Manager or compare the Optiview VMX and VMX+ here.

Features Gained:

Optiview’s VMX will support Optiview legacy equipment as well as the latest in megapixel, analytic, and edge recording technology.

WHAT IS THE DIFFERENCE BETWEEN THE FREE VMX AND PAID VMX+ VERSION?

The free version of the Optiview VMX supports 64 video channels, 2 ANPR channels, 2 facial recognition channels, 64 access control channels, 2 POS channels, 4 attendance devices, 2 alarms, and supports only 1 online user at a time.

The paid version allows the user up to a maximum of 512 video channels, 200 access control devices, 1024 doors, 32 video intercom devices, 32 facial recognition cameras, 100 alarms, 32 license plate capture cameras, and supports up to 100 online users.

See which software is right for you here!

WHEN WILL THE VMS STOP BEING SUPPORTED AND AVAILABLE?

The Optiview VMS 2018 will continue to be available to download for a limited amount of time, but will no longer be supported going forward.

WHAT IS THE MAXIMUM NUMBER OF DEVICES THAT CAN BE PUT ON THE FREE VMX OR THE PAID VMX+?

The free version of the Optiview VMX will suport up to 64 cameras. If the user wants to view more than 64 cameras, they will have to purchase the Base License, and then an additional license for each channel, up to 512. See which software is right for you here!

HOW DO I UPGRADE FROM THE VMS TO THE VMX?

The VMX software is completely different from the Optiview VMS and a user can use both. The VMX Server and Client software can be downloaded here.

WHAT IS THE DIFFERENCE BETWEEN THE VMX SERVER AND THE VMX CLIENT?

The server runs all the services and acts as a connection point for several clients that will handle the management of configurations, devices and integrations of one or more IP devices supported by the Optiview VMX software.

IF I HAVE THE SERVER DOWNLOADED, HOW DO I DOWNLOAD THE CLIENT?

The client can be downloaded using the link from the server user interface labeled as “Download Client”. I also made a link for the Client software within our technical support page which Georgia can use, to make a download link within the product resource page.

CAN I DESIGNATE THE NUMBER OF CAMERA CHANNELS BEING SEEN BY THE VMX PER DVR OR NVR?

Yes. The number of cameras “actually” in use by a device (for example a 32-ch NVR) can be designated within the VMX so that it can only sees the actual number of channels. For example, If a user is using multiple 32 channel recorders but not all channels, the VMX can be set to not count every single channel and maximize the usage.

CAN I DESIGNATE THE NUMBER OF ACCESS CONTROL DOORS BEING SEEN BY THE VMX?

No. Whatever the maximum number of doors that an access control panel can handle is, that is what the VMX will see. For example, a CAS-4MC (4 door master control panel) is expandable up to 64 doors, so this will max out the VMX. No additional master control panels can be added unless the user upgrades to the paid version of the Optiview VMX.

CAN I SEE THE HUMAN TEMPERATURE DETECTION & NOTIFICATION SOLUTION ON THE VMX?

The human temperature text overlay can be seen at LIVE mode and Playback mode at the VMX.

HOW MANY USERS CAN ACCESS THE VMX AT ONE TIME?

For the FREE version, only 1 user can access the VMX at any given time, regardless of how many clients are downloaded. With the paid version, up to 100 active users are able to access the VMX Server at any given time via multiple clients. See which software is right for you here!

.

I’ve wanted to make this list for a while, and hopefully it will help answer some simple questions or guide newcomers on their IP video quest. Feel free to add, change, or refine this!

 .

Most Popular Camera Manufactures (on this forum):

ACTi (http://www.acti.com) – Midrange camera – good price – free software.

Avtech (http://www.avtech.com.tw) – Has good ‘push’ support for events to mobile devices.

Avigilon (http://www.avigilon.com) – Similar to Axis cost – must buy through dealer – good software/support.

Axis (http://www.axis.com) – Popular choice – higher end cameras get expensive – easy to find online for sale – free + paid software options.

Dahua (http://www.dahuasecurity.com‎) – Re-branded as Q-See – low price – difficult to find updates/support.

Geovision (http://www.geovision.com.tw‎) – Midrange – have some LPR cameras.

Grandstream (http://www.grandstream.com) – Low cost – have some unique features.

Hikvision (http://www.hikvision.com‎) – Becoming more popular – re-branded as Lorex/Swann systems from Costco.

IQinVision (http://www.iqeye.com) Midrange pricing.

Mobotix (http://www.mobotix.com) – Cameras made in Germany – reliable but expensive – no moving parts to fail in their cameras.

Vivotek (http://www.vivotek.com) – Midrange pricing.

 .

Other Camera Manufactures:

Arecont (http://www.arecontvision.com/‎)

Brickcom (http://www.brickcom.com/)

Bosch (http://www.boschsecurity.us/en-us/ProductInformation/Cameras/NetworkCameras/)

Canon (http://www.usa.canon.com/cusa/professional/products/security_video_solutions/network_cameras)

GE (Unknown Website Address)

Honeywell (http://www.honeywellvideo.com/products/cameras/ip/index.html)

JVC (http://pro.jvc.com/prof/attributes/category.jsp?productId=PRO5.2)

Panasonic (http://www.panasonic.com/business/psna/products-surveillance-monitoring/index.aspx)

Pelco (http://www.pelco.com/sites/global/en/home.page)

Samsung (https://www.samsung-security.com/)

Sony (http://pro.sony.com/bbsc/ssr/mkt-security/)

Toshiba (http://www.toshibasecurity.com/)

 .

IR Illuminators:

Raytec (http://www.rayteccctv.com/)

Axton (http://www.axtontech.com/)

Iluminar (http://www.iluminarinc.com/)

+Other Generic Brands

 .

Accessories:

PoE Switch (Unmanaged, or Managed which allows remote powering on/off of specific ports) (TRENDnet, Netgear, D-Link, Cisco, Axis, etc.)

Ethernet Cable (Regular/Burial Grade)

Lenses (C/CS/S/D Mounts)

IR Illuminators (Discussed Above)

Enclosures (Pelco, Videolarm, Axis, Generic Brand, etc.)

PIR Sensor (Optex, Bosch, etc)

UPS Battery Backup System

 .

Popular Places To Buy:

[Redacted – do a search on the forum for general ideas ]

 .

Video Recording Software:

ACTi VMS (Free) – Only supports ACTi Cameras.

Avigilon (Per channel: Core ~$100, Standard ~$200, Enterprise ~$350) – Purchase through authorized dealers.

Axis Camera Companion (Free) – Only supports certain (newer) Axis Cameras. 16 cameras max.

Axis Camera Station (~$90/license)

Axxon Next (Free for 16 channels) (http://www.axxonsoft.com/products/axxon_next/)

BlueIris ($29.95 – $49.95) (http://blueirissoftware.com/) – Supports a large variety of network cameras.

exacqVision ($50 – $150/license + $25 yearly for optional updates)

Genetec (Expensive)

Geovision (Free)

Luxriot ($99 – $1000+)

Milestone XProtect (Free – $1000+)

Mobotix Control Center (Free) – Supports other cameras for viewing. May be able to record with MXServer.

OnSSI (Unknown)

Vitamin D (Free/$49/$199) (http://www.vitamindinc.com/index.php) – PC + Mac Compatible

Zoneminder (Free) – Open source Linux software.

…Etc, Most Manufactures Provide Their Own Software.

 .

Network Video Recorders (NVR’s)/NAS Stations:

Synology (1 License Included – ~$50 /per additional license)

Dahua

QNAP

Luxriot

NUUO

Hikvision

 .

iPhone Viewing Apps:

Netcam Viewer (Free/$5.99) (http://bit.ly/18UfXMs)

Live Cams Pro ($1.99) (http://bit.ly/19RAleQ)

QCamPro ($7.99) (http://bit.ly/14iCWxR)

Official Mobotix (Free) (http://bit.ly/15XNtmo)

IP Cam Viewer Pro ($3.99) (http://bit.ly/10QAwYn)

Dahua iDMSS Lite (Free) (http://bit.ly/110ZjmV)

Dahua iDMSS Plus ($4.99) (http://bit.ly/12FyWpw)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

 .

Android Viewing Apps:

IP Cam Viewer Pro ($3.99) (http://bit.ly/TG6OyB)

Dahua gDMSS Lite (Free) (http://bit.ly/12zjvAs)

Dahua gDMSS Plus ($5.00) (http://bit.ly/12FzfAA)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

The Ultimate IP Camera Guide v3.

Review Sites/Sample Videos:

Network Camera Critic (http://www.networkcameracritic.com/)

Mateusz CCTVnerd (http://www.youtube.com/user/mateuszfen)

Megapixel Cameras – Images and Demos (viewtopic.php?f=19&t=11322)

Plazor (http://www.plazor.com)

Axis YouTube Channel (http://www.youtube.com/user/AxisCommunications)

Avigilon YouTube Channel (http://www.youtube.com/user/Avigilon)

MXInstaller (http://www.mxinstaller.com/)

 .

Companies That Rebrand/Resell:

Swann (Rebrands Hikvision Equipment)

Lorex (Rebrands Hikvision Equipment)

Q-See (Rebrands Dahua Equipment)

Toshiba (Appears To Rebrand Vivotek)

Cisco (Sometimes Rebrands Pelco)

 .

Other Helpful Links:

CCTV Lens Calculator (http://www.jvsg.com/online/#)

Identification And Recognition Guide (http://www.axis.com/academy/identification/index.htm) – Make sure you have the correct resolution for your application.

Security Today – IP Cameras (http://security-today.com/directory/list/ip-video.aspx)

CCTV Frame Rates Comparison (

) – Recordings don’t necessarily have to be 30fps for desired results.

IP Video 101 Training (http://ipvm.com/report/ip_video_training_course_101)

 .

Live Demo Cameras:

Mobotix Cameras (http://www.mobotix.ro/live-ro-p-3.html) or (http://comsurv.com/live-video-cameras/)

Axis Cameras (http://www.axis.com/camerademo/) or (http://ipcameralive.com/)

Mixture (http://camelive.info)

 .

Terminology:

CBR: “Constant bit rate [encoding] means that the rate at which a codec’s output data should be consumed is constant.” (i.e. the amount of data flowing from camera to user/nvr is always constant – even during movement or lack thereof. [See also VBR])

DSD: (http://www.dsdcctv.com/)

DVR: “a consumer electronics device or application software that records video in a digital format to a disk drive, USB flash drive, SD memory card or other local or networked mass storage device.”

Edge Recording: “The concept of taking audio/video from a camera, and storing it at the edge of the Ethernet network instead of transporting it across the network to a centralized recording facility such as a Network Video Recorder.” (Most cameras have this ability now.)

IR/IR Illuminator: LED’s (often a separate device) which provide illumination for cameras in near to total darkness. The light produced cannot be seen by the human eye. The camera must be sensitive to IR for this to be useful (some cameras have ‘fixed’ IR cut filters). ‘White light’ illuminators are also available. These produce light visible to the human eye and to a camera with or without an IR cut filter.

LPR/ANPR/AVI/CPR/LAPI: “A mass surveillance method that uses optical character recognition on images to read vehicle registration plates.”

NAS: Basically a box filled with hard drives for storage of data. Some cameras have the ability to record directly to these networked boxes without the need for an always on or dedicated computer.

NVR: “A software program that records video in a digital format to a disk drive, USB flash drive, SD memory card or other mass storage device.”

ONVIF: “Open Network Video Interface Forum (ONVIF) is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products.”

PIR: Passive Infrared “is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.”

PoE: “A system to safely pass electrical power, along with data, on Ethernet cabling.”

UPS: “uninterruptible power supply…is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.”

VBR: “Variable bit rate files vary the amount of output data per time segment.” (i.e. Less data during still scenes, more data during high movement periods.)

WDR: “‘Wide dynamic range’ describes an attribute of an imaging system which can capture greater scene details from shadows to highlights than normal.”

 .

Commonly Asked Questions:

Q: “Which brand or manufacturer should I buy?”

A: Each brand has its strengths and weakness, whether it be price, size, low light capabilities, resolution, frame rate, support, software, compatibility, etc. There really isn’t one magical brand or camera. Each security scenario is different and requires a unique solution.

 .

Q: “Where can I buy an IP HD PTZ Outdoor Camera for $200?”

A: Probably not going to happen. PTZ cameras are expensive because of all the motors, belts, gears, and such. Perhaps instead consider using several fixed multi-megapixel HD cameras instead for coverage.

 .

Q: “How do I embed/add video from a camera to a website?”

A: See: http://www.networkcameracritic.com/?p=1290 or http://bit.ly/10rC8WV

 .

Q: “How do I view my cameras on my TV/Monitor?

A: Consider using an Android powered HDMI dongle. These mini computers are powerful and compact enough to be attached to a TV or monitor for camera viewing using an Android app. Also see: http://www.networkcameracritic.com/?p=1049

 .

Q: “Should I buy a Foscam?”

A: These cameras are not typically discussed here because of their poor reliability and feature set. They are often cloned and copied making firmware updates and support hard to come by. So in short, probably not. However if you are just starting with IP cameras, many members have since upgraded from these over time to bigger and better.

 .

Q: “How do I view my camera(s) from the internet?”

A: You need to setup your router for port forwarding. Here are several guides to assist you. See: http://www.networkcameracritic.com/?p=124 or http://bit.ly/184DTvf

 .

Q: “What shutter speed should I use during low light/night?”

A: “Typically 1/30 of a second is as low as you would want to have it set. Any longer and moving objects will be blurry making the footage less then useful.

 .

Q: “Should I use a wireless camera for my application?”

A: Wifi signals, especially at long distances, can drop or become unreliable. They also become targets of hacking “resulting in free access to your personal cameras (EXTREMLY DANGEROUS) or blocked cameras, ones that will not record anything.” It is best to use a hardwired connection via cable for installations. PoE installation can supply signal and power over one cable for easy installation. If a cable is not an option consider using a dedicated wifi access point, like the type made by Ubiquiti Networks.

Technical Guide to IP Cameras– Overview, Types, Applications

.

An IP camera (Internet Protocol Camera) is a type of security camera that receives video data and sends video footage via an IP network. It is also known as network camera or IP security camera, often used as remote monitoring and management tools in many sectors and environments to protect the property or monitor home, business, or public security. Connected with other devices such as network video recorders and displays via a network, IP cameras allow you to monitor specific areas from any remote location, bringing much convenience to our daily lives.

How Does An IP Camera Work?

IP cameras work the same way as digital cameras to capture high-quality images. What sets them apart is the capability of IP cameras to compress those files and automatically transmit them to a network video recorder (NVR) via a network. Usually, IP cameras are connected to the network via ethernet cable with a broadband modem or router, or wirelessly via a Wi-Fi router.

In a building that has already been equipped with a network, all you have to do is to connect the IP surveillance cameras and other devices into your network system, just the same way that you would do when you connect your laptop or cell phone to your Wi-Fi.

After everything is well connected, the cameras can start working, capturing and sending video footage to the network video recorder.

Four Common Types of IP Camera

There are various video surveillance solutions, in which many different types of security cameras are adopted. Among those surveillance cameras, there are four most commonly used ones, dome cameras, bullet cameras, and turret cameras. Knowing more about the differences among dome vs bullet vs turret vs fisheye cameras will help you find out the one that fits you most.

Four Important Specifications of IP Cameras

When looking for a security camera, not only should you decide on the type of it, but also you need to notice that the specifications can make a huge difference. There are four of the most essential specifications.

Resolution

The resolution of IP cameras is the total number of pixels that make up an image, which is usually measured by the width and height of the image. The most common resolutions of security cameras are 720p, 1080p, 5MP, 4K and 8MP. Usually, higher resolutions mean that there are more pixels per inch (PPI), resulting in a high-quality, crisp image.

Field of View

The lens of an IP camera allows you to frame an area that you want to spot. Different lens systems come with different fields of view, which determines how wide an area you can see. A wider field of view will allow the camera to spot a larger area. Typically, for a large parking lot and a small room, you will need lenses with different viewing angles.

Focal Length

The focal length of a lens, which is measured in “mm”, determines the angle of view and how far the camera can see. There are two types of lens, fixed lens and varifocal lens. The most common fixed focal length is 3.6mm, which leads to a 90° view angle and a distance of 20 feet. There is also 8mm lens with a 40° view angle and identification distance of 40 feet. For varifocal lenses, the most common ones are 2.8-12mm lenses.

At 2.8mm you get around 100° view angle, with only around 10-feet identification distance. At 12mm you will achieve around a 30° angle of view and identification at around 50 feet. The wider the focal length, the further away it can focus and the narrower the field of view.

Low Light Sensitivity

Low-light sensitivity, usually measured in Lux(lx), refers to the ability of a camera to provide high-quality images even in low-light conditions by presenting details and reducing noise in the output images. There are few factors contributing to the low light performance of a camera, including pixel size, signal-to-noise ratio, lens aperture, etc. A lower Lux has the ability to present high-quality images in darker areas. For example, cameras with 100-1,000lx are applied to record under work-space light, while cameras with 0.0001lx are usually adopted for moonless nights or overcast nights.

Most Popular IP Camera Applications

Home Use

For those looking for tools to get close with their families, monitor family security or protect family property, IP cameras are always a go-for item. Many homeowners equip their families with a video surveillance system to make themselves and their families feel safer.

The IP cameras installed in home security systems have been used to serve a number of purposes. For example, they can be installed near the front door to capture the image of each one who steps into or sneaks around the house, or installed in the backyard to catch a view of their families’ happy moments, or installed inside the room, to make sure their baby is being well taken care of, etc.

Business Use

Commercial security cameras are often used in business buildings, supermarkets, shops, restaurants, etc. For business owners, security cameras can not only protect their property to ensure normal operations and prevent criminal acts with real-time monitoring, but also can keep them connected with daily operations and employee safety.

Outdoor perimeter security can also be maintained with video surveillance solutions to monitor the surroundings. Compared to traditional systems, commercial IP video surveillance systems offer greater reliability and security with built-in encryption, data compression, network connection, and cybersecurity measures.

Public Safety

Surveillance cameras play an important role in managing public rules, protecting public safety and property. It’s not difficult to find that there are plenty of monitoring cameras along the traffic roads, parking lots and around the governments or hospitals. Moreover, there are lots of public areas deployed with security cameras, including schools, parks, communities, neighborhoods, etc.

Conclusion

IP cameras have become a dispensable part of home, business or public surveillance systems. With the proper video management software, the video recorded by IP cameras can be viewed from anywhere worldwide via the network, whether using a laptop or a mobile phone. In many cases, IP cameras can also be controlled remotely, adding much convenience to our lives.

There are various types of security cameras that are designed for specific applications, and that’s why you need to take several factors into consideration when purchasing IP cameras for your security system. Before the next step, it would be better to figure out your budget and your requirements first.

Guide to Understanding IP Cameras

Welcome to a venture into the captivating digital world of Internet Protocol (IP) cameras. Whether you’re considering investing in this game-changing technology or you’re simply eager to boost your tech acumen, we’ve got your covered. Untangling complex technical jargon and translating it into simple language, this blog post will chart your course through the depths of understanding IP cameras.

What is an IP Camera?

An IP camera , also known as a network camera, is a digital video tool that sends and receives data via the internet. Unlike its analogue predecessor, the CCTV (Closed Circuit TV), it offers the functionality to view live or recorded footage from anywhere, anytime using a web-based platform or mobile application. Think of IP camera as the digital evolution.

Advantages of the IP Camera

.

Understanding IP Camera Operation

Let’s dive deeper into how these fantastic little devices work.

Capturing Images

The essence of an IP security camera is in its lens, sensor, and processor. The lens focuses on the light emanating from the surroundings, which then hits a digital sensor. This sensor transforms the received light into an electronic signal that the processor can turn into a digital video stream.

Sending Images

The key difference between an IP camera and previous systems lies in its ingenious use of the Internet Protocol. Instead of sending unprocessed data to a recorder, IP cameras encode and process the signal on the device before transmitting it to be stored or viewed over the network. This reduces the workload for the recorder, enhancing the system’s efficiency.

.

Most Popular Types of IP Cameras

Not all IP cameras are created equal, of course. Different styles suit different needs. Here’s a quick classification of the most commonly used types:

Bullet Cameras

These are named for their cylindrical shape, resembling a bullet. Bullet cameras are great for monitoring both wide focused areas such as entrances or small rooms.

Dome Cameras

Identified by their dome shape, these cameras provide a wider viewing angle ideal for bigger spaces like living rooms or stores.  Some come with adjustable lenses to hone in on important areas.

PTZ Cameras

PTZ stands for Pan-Tilt-Zoom. A PTZ IP camera provides the functionality to remotely control the movement and zoom of the camera, making it perfect for large, open spaces.

.

IP Camera Installation: Tips and Tricks

Installing an IP camera isn’t rocket science. Here are some friendly tips to ensure you obtain the best surveillance results:

.

Securing Your IP Camera

In an increasingly digital world, security is paramount. Here are a few guidelines to secure your IP camera system:

Change the Default Password

On purchase, devices often come with generic login credentials. It’s essential to change these immediately to a unique and complex password.

Regular Firmware Updates

Stay up-to-date with the latest firmware version provided by the manufacturer. This ensures your device is protected from any known loopholes.

Effective Network Security

Ensure your home or business network security is robust. Use established security measures such as firewalls and secure Wi-Fi protocols.

The captivating world of IP cameras offers the potential for superior surveillance solutions. The charm of hands-on control combined with the convenience of remote access can revolutionize how we approach security. Yet, it is crucial to remember that with great power comes great responsibility. In this digital age, securing our devices should always be a priority. Embrace the technology but don’t forget to keep it secure. Welcome to the future of surveillance.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option (  ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu (  )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu (  ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note:  Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu.  Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file.  Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed.  Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the  icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings  icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the  icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings (  )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the  option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon (  ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon (  ) for the device. Select Video Channel  and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit (  ) icon and name the tour. Click the checkmark (  ) when finished.

Note: Click the Go icon (  ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the  icon and select the Edit (  )icon.

Step 4: Enter a name for the tour and click the add (  ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play (  ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop (  ) icon in the Tour (  )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon (  )

.

About this Document

Safety Instruction

.

●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the device and shall be easily accessible.

●For the device with the sign  indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.

●Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Do not ingest battery. Chemical Burn Hazard!

●This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

●Use only power supplies same with the original model, or LPS power supplies with the same voltage and electric current.

Preventive and Cautionary Tips

.

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.

●The device shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

●No naked flame sources, such as lighted candles, should be placed on the device.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains. The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.

● identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

● + identifies the positive terminal(s) of the device which is used with, or generates direct current, and – identifies the negative terminal(s) of the device which is used with, or generates direct current.

●If the device has been powered off or placed for a long time, its coin/button cell battery may run out power.

●When the coin/button cell battery runs out power, the system time would be incorrect, please contact the after-sales service to replace the battery.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Do not touch the sharp edges or corners.

●When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to make the HDD temperature in S.M.A.R.T. below the stated value.

●Provide a surge suppressor at the inlet opening of the device under special conditions such as the mountain top, iron tower, and forest.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.

●The serial port of the device is used for debugging only.

●If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure.

●If a power adapter is provided in the device package, use the provided adapter only.

●For the device with sticker or , pay attention to the following cautions: CAUTION: Hot parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching off before handling the parts.

●If the device needs to be installed on the wall or ceiling,

1.Install the device according to the instructions in this manual.

2.To prevent injury, this device must be securely attached to the installation surface in accordance with the installation instructions.

●Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power adapters may decrease.

●Make sure that the power has been disconnected before you wire, install, or disassemble the device.

●If the device needs to be wired by yourself, select the corresponding wire to supply power according to the electric parameters labeled on the device. Strip off wire with a standard wire stripper at corresponding position. To avoid serious consequences, the length of stripped wire shall be appropriate, and conductors shall not be exposed.

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Hikvision New GUI 5 User Guide

Content Convention

.

In order to simplify description, please read the following conventions.

.

.

.

Reason

Solution

.

Note

If your video recorder notifies not support this function, you can log in to the camera, and adjust video parameters via web browser.

.

Reason

The camera password is too weak.

Solution

Change the camera password.

.

.

Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

.

.

.

Reason

The camera encoding format mismatches with the video recorder.

If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/ MJPEG, change the camera encoding format to the same as video recorder.

.

.

Solution

Check if the encoding type at live view toolbar is H.265.

.

.

Reason

The video recorder uses the same IP address as other devices.

Change the IP address of video recorder. Ensure it is not the same as other devices.

.

Intelligent Operation – Smooth UI experience

Intuitive live view

• Check the real-time channel status clearly

• With customized views, live views can be more intuitive on one view layout and enable automatic switching to meet the needs of multi-screen timed switching

The conventional video searching methods usually are time-consuming. Right now, the Smart Search and the AcuSearch functions could help accelerate searching efficiency in minutes, even in seconds.

Smart Video Searching

The NVR 5.0 with converged functions provides support for video, audio, alarm, access control, and other application access. Creating intelligent applications for different scenarios and needs.

.

EZCLOUD REGISTRATION

Uniview provides a web portal to sign up and register an account with EZCloud. http://en.ezcloud.uniview.com It is recommended that Internet Explorer 8 or higher be used to view the web portal.

.

There are a few aspects to note about the web portal:

.

.

An account can also be registered through the EZView smart phone application. See Adding A Device -> EZView

.

ACCOUNT SIGN UP

.

Signing up an account is very similar to most other online account registration as seen from the image above. Enter in the proper information requested such as the Username, Password and a valid Email

address. Click the Acquire button to receive a registration email which provides a Verification Code. Please note that the email may take several minutes to arrive.

.

Enter the Verification Code into the box provided and click the Sign-up button to register the new EZCloud account.

.

PRO TIP: Integrators and Installers can setup an account and then share device access to customer accounts for managing multiple devices and providing support later.

.

.

ACCOUNT LOGIN

.

.

Login either with the Username or registered Email address created previously for account management. If the password has been forgotten, there is a link provide for password retrieval.

.

EZCLOUD MANAGEMENT

Once the register code is located, there are three different ways to add and manage devices on an existing EZCloud account; through the EZCloud web portal, through the EZView smart phone application and through the EZStation CMS.

EZCloud Quick Install Guide v2

.

REGISTER CODE

The Register Code is a unique 26 digit & character string that is used to connect a device to the EZCloud service. This code also comes in a QR format for quick scanning. There are a few places you can find the Register Code:

.

Note the QR Code on the sticker for quick adding the device to an EZCloud account via the EZView smart phone application (more on the EZView app later in this guide).

.

The myCloud feature is toggled on by default. Please note that a new myCloud account cannot be registered from the recorder interface.

.

NOTE: On some device firmware versions Uniview uses the title myCloud rather than EZCloud. The URL containing myCloud will redirect to the proper EZCloud URL accordingly.

.

.

.

NOTE: Currently (as of December 2015), the web interface of Uniview devices will only work properly on Internet Explorer version 8 or higher.

.

EZCLOUD WEB

.

.

.

Once logged into the EZCloud web portal (as described in the EZCloud Registration guide section above), the backend will appear as the image shown above. To add a device, click the + Add Device button and a new webpage will display with entry boxes for both the Register Code and Device Name. The Register Code is the 26 digit and character string detailed in the section above. The Device Name is a title that represents the device being registered (e.g. Office B, 123 Elm St, ABC Company, etc.)

.

.

After clicking the Add button, the Device List will appear again with the newly registered device listed under My Cloud Devices. If the P2P service plug-in was not previously installed, the follow message will appear on the upper most portion of the web page:

Click the Download link and install the plug-in (the computer may have to be restarted to complete the install) After rebooting the Windows PC and accessing the EZCloud backend again, there may be a similar message on the lower portion of the web page as follows:

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

On the management page, there are three different sections: My Cloud Devices, Shared Cloud Devices and Sharing Records.

.

.

MY CLOUD DEVICES

The My Cloud Devices section of the EZCloud management page lists all added devices to the registered account. The devices can be navigated using a simple interface utilizing arrows to browse through the results (see toolbar at the bottom of each section).

.

As with the following sections, there are multiple columns that denote information that pertains to the recorder(s) registered to the account.

.

• Device Name – the name given to the device when it was first registered.

• Device Type – the model # of the registered device

• Device IP – the external IP address of the registered device

• Latest Online Time – the time the device was last detected to be online

• Status – indicates whether the device is Online, Offline or having a network error

• Share Device – a link that provides a menu to share the registered device:

NOTE: The ‘Share To’ input box receives the email or username of the account being shared to. A date and time can be set indicating how long the device will be shared. A specific user group can be selected defining the rights given to the shared device. Finally, a description can be entered to let the user know details that represent the device.

• Change Name – a link that allows the user to change the name of the device

• Retrieve Password – allows the user to generate an overriding password in the case of a forgotten password:

.

NOTE: All information will be entered automatically into the above form as it pulls it from the registered device. By clicking the Acquire button, the form will send an email with the verification code. Enter the verification code into the input box and click Retrieve to receive a password. The generated password will only work for the valid date and only if the device is properly set to the valid date. If the date is set incorrectly on the device, adjust accordingly on the Retrieve Password web page.

.

SHARED CLOUD DEVICES

The Shared Cloud Devices section displays a list of devices that were shared to the registered account. The columns of information in this section are very similar to My Cloud Devices, however there are some unique information displayed for shared devices.

.

.

All other columns such as Status, Change Name, Access Device and so forth, function exactly the same as in the My Cloud Devices section.

.

SHARING RECORDS

The Sharing Records section displays a list of devices that have been shared by the registered account. As with the previous sections, there are some columns of note.

.

EZVIEW

.

EZView is Uniview’s smart phone application for monitoring, configuring and managing multiple camera systems. Typically, a device will be added to an EZCloud account using the EZView app due to the ability to forgo using a computer for set up.

.

REGISTER (EZVIEW)

On the main screen, there is an icon in the upper left-hand corner that appears to be like three lines stacked. This is the main menu button. Click the main menu button and then click the P2P Account link at the top of the menu. This will bring up a Login screen that also has a few notable links. The first is the Sign-Up link that will allow for a new account to be registered through the app (similar to the web portal method detailed earlier in this guide). The second link, Forgot Password, gives a similar menu to allow for an email verification and password change.

.

Once logged in to the registered EZCloud account, the P2P Account menu will appear (referenced above). On the P2P Account menu there are a few minor options which include the ability to change the account’s username and password. The My Sharing Records menu lists all instances of when devices have been shared from the current account and sharing can be canceled on any of these instances.

.

My Devices links to the Devices menu which displays all devices added to EZView (includes MyCloud Devices). See the third image above; there are different icons that indicate what kind of device is being listed. The light blue recorder with a cloud symbol indicates a device added via EZCloud and the teal recorder with the share icon indicates devices that have been shared via EZCloud.

.

ADD A DEVICE (EZVIEW)

To add a new device to EZCloud, click the small + icon in the upper right-hand corner of the Devices menu. Below is an image of the Add Device menu.

.

The Add Device menu contains the following options:

.

.

The Save button in the upper right (looks like a floppy disk) will add the device to the logged in registered account. The Start Live Preview button will not only add the device, but it will also launch all cameras in Live View.

NOTE: A registered EZCloud account must be logged in before adding a new device via P2P.

.

EZSTATION

.

EZStation is Uniview’s CMS software that allows for monitoring, configuring and managing multiple camera systems on a Windows PC. NOTE: Currently (as of December 2015) there is no CMS software developed for Apple Mac computers.

.

REGISTER (EZSTATION)

Registration of a new EZCloud account is straight forward; on the Home Screen (shown above) click the Device Management tile and then click the Cloud Device on the left toolbar under the Device tab. By clicking the Register button, the EZStation software will launch an Internet Explorer browser window to register an account online. The process of registering on the EZCloud web portal is located in the EZCloud Registration section of this guide.

.

Once registered (or if already registered) click the Login button to enter in the login credentials for the EZCloud account of choice. Other options include Auto Login, applying for an account from the login menu and account password recovery.

.

DEVICE MANAGEMENT (EZSTATION)

.

There are two main sections of interest here: the My Cloud Device list and the Shared Cloud Device list. Above those two lists are a header with the currently logged in EZCloud account, a Refresh link to refresh the current lists, a Switch Account link which launches a new login menu for account switching and a Logout link.

.

MY CLOUD DEVICE (EZSTATION)

The My Cloud Device list is dedicated to managing devices that have been added to the registered EZCloud account. The toolbar has the following features:

.

.

SHARED CLOUD DEVICE (EZSTATION)

The Shared Cloud Device list displays the devices that have been shared to the currently logged in account. If the integrator opts to share cloud devices with the end user, then the end user will be utilizing this list to see the status and have access to those devices. The toolbar has the following features:

.

Viewing and configuring the cloud devices listed in the Cloud Device menu is the same as any of the other device types on the Device Management page. Please see Uniview’s help file by clicking the User Manual button the topmost toolbar in the upper right of the EZStation software, to learn about how to group devices to prepare them for live viewing.

.

ADDITIONAL INFORMATION

Cloud Update (firmware) will not function unless the device is registered to an EZCloud account.

.

EZView has a speed test function that allows the user to find the upload speed for a device registered to the currently logged in EZCloud account.

.

A device can only be registered to one EZCloud account. All other accounts need the device to be shared to them by the EZCloud account that the device was originally registered to unless the device is deleted from the original account’s device list.

.

EZCloud may be referred to as MyCloud on older firmware versions.

.

P2P refers to Peer-To-Peer. A “Cloud” device refers to, in the case of EZCloud, a device that has been registered to EZCloud for remote connection (not a remote storage medium). The way P2P works is that the device connects to the EZCloud server and then to the end user. The EZCloud acts as a go between, rather than having to open up ports (pinholes, virtual servers, etc.) to allow remote access to offsite clients. This is the preferred method of remote connection since open ports can pose a security risk and can be difficult to setup on complex networks (especially when a firewall is implemented).

Also, many satellite internet service providers and mobile hotspots will not allow ports to be opened unless a static IP is purchased (usually at a premium).

Importance of Firmware Upgrades

Another reason for updating firmware is to enable new features which are added to the camera software. One example is the 5MP Active Deterrence PTZ, which gained the ability to perform auto-tracking after a new firmware was released in 2021. Leo Xu from Uniview said this about firmware upgrades: “We do a major update every quarter and a minor update every month. Every product has some differences.”

How to Perform a Firmware Upgrade – Via EZTools 2.0

Now that you understand the importance of a firmware upgrades, you’ll want to know how it’s done. The easiest way to upgrade your camera’s firmware is via EZTools 2.0; Uniview’s robust camera configuration tool. You can download that from the support section of our website – 

After installing EZTools 2.0, open the software and follow the steps below to update your Uniview cameras’ firmware:

If you selected an NVR during steps 1 and 5, you will be able to upgrade all cameras added to the NVR during step 6. So, this method makes it very quick and easy to perform a firmware upgrade.

.

How to Perform a Firmware Upgrade – Via Web Interface

Another way to perform a firmware upgrade is via the web interface of the camera. To access the web interface of the camera, use EZTools 2.0 to find the local IP of the camera and enter it in your web browser. Or, you can click the “Remote Web” icon to automatically open the camera in your default browser.

Login to your camera via the web interface; you may have to change the default password first. Once logged into the camera, navigate to Setup -> System -> Maintenance. You’ll see two options under Software Upgrade: “Local Upgrade” and “Cloud Upgrade”. If you already have the latest firmware package on your computer, choose “Local Upgrade” otherwise use the cloud upgrade function by clicking “Detect”. If a new firmware is available, the button will change to “Cloud Upgrade”; click it again to update the camera to the latest version.

How to Perform a Firmware Upgrade – Via NVR (using local monitor)

The previous two methods of upgrading your firmware require a laptop or desktop computer to complete. If you don’t have access to a computer, you can also upgrade the camera’s firmware through the NVR’s local interface. Of course, the NVR must be connected to a monitor via VGA or HDMI so you can see what’s happening.

Using a USB mouse connected to the NVR, right-click to open the menu and select “Main Menu”. Navigate to Maintenance -> Upgrade -> IPC Upgrade for a list of all cameras added to the NVR. Click “Check for Update” at the bottom for the NVR to search Uniview’s servers for the latest firmware version for your cameras. Next, select the cameras you’d like to upgrade by checking the box on the left side. Finally, click “Upgrade by Cloud” and hit “OK” to upgrade the selected cameras firmware.

Conclusion

It’s important to regularly keep the firmware on your Uniview cameras updated to the latest version for security and performance reasons. The instructions in this guide also apply to Uniview NVRs, which also need to be upgraded for the same reasons. If you aren’t able to find the latest firmware via cloud upgrade, you can try emailing Uniview support: globalsupport@uniview.com. Occasionally they have access to newer, stable firmware which has not been released on the cloud yet. In addition, we plan on adding firmware downloads to our site in the near future.

.

Support – EZView Firmware

Please update at your own risk
We are not responsible for any device failure

DVR Firmware

.

IP Camera Firmware

.

Update by EZCloud

Updating from the recorder

Note: NVR must be online in order for this to work and make sure System > Network > EZCloud is enabled.

.

How to Update Uniview Cameras Firmware (2024 Instructions)

If you own a security camera system, it’s very important to keep the firmware updated for all the components such as the cameras, recorders, and even the apps/software used for monitoring. Occasionally, vulnerabilities are discovered which can be exploited and have the system hacked or misused.

Recently, Uniview announced a security notice regarding their firmware and equipment that required an update to close bugs that allowed users to target the cameras.

Another reason to update the firmware of the cameras is to enable new features or other technical improvements.

Sometimes cameras may underperform and the update may fix issues such as a bad image, erroneous behaviors, unresponsiveness, etc.

Usually, Uniview releases a major update every quarter, and a minor update every month. Basically, you need to pay attention to your equipment and ensure that the units are using the latest firmware at all times.

In this guide, we will show how to update Uniview cameras, what software to use, and how to find the right firmware.

How to update firmware on Unview cameras

There are three ways how you can update the firmware:

Upgrading the firmware via EZTools

The easiest way to update Uniview’s camera firmware is by using the EZTools software. This tool can be downloaded here (or from Uniview’s website) and it’s basically a configuration tool.

It allows the user to scan the local network. Simply locate Uniview cameras and then by following the prompts you can update the firmware.

Once the EZTools is installed, run the tool. The software will scan the local network and list all the found devices (as shown in the picture below).

Check the box beside the camera (or NVR) that needs firmware update. Then click Login (the status should show “Not Logged In”). In this window, you need to type the camera’s username and password and then hit OK.

Next, click the Upgrade tab on the left hand. Choose Local Upgrade if you have previously downloaded the firmware in a .zip or .bin format (on your computer). Otherwise, select Cloud Upgrade.

Tick the box beside the device that needs to be updated and then hit Upgrade to start the process. The tool will show if there’s a new firmware update; if so, hit OK and the upgrade procedure will start right away.

Usually, it takes 2-5 minutes to complete. During this time, don’t disconnect the camera or perform any other action. If interrupted, the camera may be bricked.

If you did select to update an NVR, you will be able to update the cameras hooked up to the NVR during the last step. This method makes it easier to update all the devices at once. And as we said, keep all your equipment up-to-date.

Upgrading the Firmware via web interface (for UNV devices)

Another method to update the firmware is by accessing the device via the web browser and going through the on-screen prompts.

First, you need to find the IP address of the unit; install EZTools software in your laptop/computer and find out what’s the local IP address of the camera.

Once you have that information, go to the web browser and type the IP address in the URL bar. Additionally, you may click the Remote Web icon in the EZTool and the software will automatically open up the web interface.

Once you log into the camera using your username and password, navigate to Setup > System > Maintenance. In this section, you should see two options under Software Upgrade: Local Upgrade and Cloud Upgrade.

If you have the firmware downloaded to your laptop, choose Local Upgrade, locate the file, and start the upgrade process. Otherwise, select the Cloud Upgrade option by hitting Detect.

The camera will check online if there’s any update package available; if so, the button will change to Cloud Upgrade. Click update and wait until the unit is updated.

Once the update is done, the unit will automatically reboot. Wait until it comes back online.

Upgrading the firmware via the Uniview NVR

The two previous methods shown above require a laptop or a desktop computer to update the firmware.

If you don’t have access to a computer, you can easily update the camera’s firmware directly to the NVR’s interface. The NVR needs to be connected to a monitor (or TV) and you can use a mouse to navigate.

Right-click with your mouse and select the Main Menu option. Then navigate to Maintenance > Upgrade > IPC Upgrade where you should see all the cameras added to the NVR.

Hit the “Check for Update” button and the NVR will start searching Uniview’s servers for any available firmware.

Then, select the cameras that you want to upgrade by ticking the box. Click “Upgrade by Cloud” and wait until the firmware is updated. In some cases, the NVR may reboot.

Conclusion

It’s crucial to keep your security devices updated to the latest firmware at all times. This not just improves the performance, but ensures that your system is secure.

In this guide, we showed detailed instructions on how to update the firmware of Unview cameras by going through the web browser, using EZTools, or via the NVR’s update interface.

You can either download the firmware from Uniview, or you can use the Cloud feature to let the system find and automatically install the correct firmware.

Additionally, you may contact Uniview’s support team to get firmware files that the NVR cannot find via the Cloud. Make sure to send them the correct model and serial number as shown on the sticker.

Uniview camera Uplink firmware

Method 1. Updating From The NVR

1.Log into the Main Menu of the recorder.

2.Navigate to Camera > Camera > Advanced

3.Click on the By Cloud button for each camera that needs to be upgraded. Each camera can also be selected by clicking on its check box and then clicking the By Cloud icon to the right.

Method 2. Updating From The NVR Web Interface

1. Load the recorders IP address in Internet Explorer. Login to the recorder once the login page is
loaded.

2.Navigate to the Settings menu and then to Camera in the left hand menu and then to IP Camera in the sub menu.

3.Navigate to the Advanced settings tab

4.In the list of cameras find the cameras that need to be upgraded and click the Upgrade By Cloud Button

5.The cameras status list will then display downloading followed by uploading % and then finished off with upgrading. After it is done upgrading the camera will reboot.

Method 3. Upgrading From Camera Web Interface

1.Find the local IP address of the camera and navigate to the IP address in Internet Explorer

2.Login to the camera and navigate to Setup > Maintenance > Maintenance

3.Locate the Cloud Upgrade Detect button and click it

4.The camera will feed back A New Version Detected for Upgrade

5.Then click the Cloud Upgrade button again

6.The camera web interface will then show a camera is updating overlay.

Method 4. Updating From EZTools

1.Open the EZTools Program

◦ You can Download That here

2.Select the Upgrade Tab on the Left side

3.Click on the Online Upgrade Tab

4.Checkmark the Device you would like to upgrade

5.Click on the Upgrade button on the bottom right corner

6.Once online upgrade is clicked the EZTools will search automatically for newer firmware for the
selected devices. The EZTools will then give you a popup showing the current device firmware
and the newest available device firmware. Check off each device that you want to upgrade on
the left hand side and click the OK button at the bottom.

7.The status of the device in the main list of devices will then read updating

8.After the update is done the device status will say Upgrade Succeeded, the device will then
restart and be up to date

Method 5. Updating From EZView App

1.Open the EZView app and navigate to the main menu in the upper left hand corner of the app.

2.Select the Devices tab. The device that has a red circle next to it shows that an update is available for the recorder or the cameras.

3.Assuming that the device has already been added to the app (if not add the device) click on the
device and select the P2P Upgrade button.

4.In the next menu select all of the devices that have the red circles next to them indicating that
they need to be firmware updated

5.Click on the Start Upgrade button at the bottom of the screen. The update will take about 5-10 min depending on how many devices and internet speed.

6.After giving the recorder enough time check back to the app to see if all of the red circles are gone. If they are this will let you know that all selected devices upgraded correctly.

all Uniview firmware download

.

.

.

By downloading the firmware from this web page you are agreeing to Hikvision’s Software User License Agreement. Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from an online source or unauthorized distributor, they may not be compatible with the North American region’s firmware and are considered to be “gray market” product. If your camera has “CH” in the serial number, you are most likely using a “gray market” product. 

Updating the firmware from this site can lead to several complications in those cameras, up to and including camera failure.  Restoring a “gray market” product to its original condition is a factory process and will result in a Chinese interface. As Hikvision warranty is void in this case, you must rely on the dealer for any service, support, and warranty of the “gray market” product. If you have any questions or concerns about the official status of your Hikvision distributor, please contact Hikvision USA Customer Service at cust.usa@hikvision.com.

.

Upgrade Device Firmware

For a device added via IP/Domain, its new version can be detected by the Mobile Client. Once detected, you can upgrade the device to its latest version.

1.Enter the Device Information page.

• On the device list page, if the page is in the list mode, swipe the device name to the left and tap .

• On the device list page, If the page is in thumbnail mode, tap the device name or tap .

• On the Live View page. Tap  and then tap Settings.

Note:

For details about how to enter the Live View page, see Start and Stop Live View.

2.Tap  > Device Version to enter the Device Version page.

3.Tap Upgrade and then tap UPGRADE on the pop-up window.

The Mobile Client will download the upgrade file first and then start upgrading the device.

Note:

You can also enable the Mobile Client to automatically download the upgrade file in Wi-Fi networks once a new device version is detected. For details, see Auto-Download Upgrade File.

.

UPDATING FIRMWARE

Hikvision regularly updates the firmware in our products to resolve potential issues and keep your system running smoothly. Below, you can find guidance on how to update your system accordingly.

Updating Hikvision IP Camera Firmware

To upgrade the firmware of a Hikvision IP camera, please follow the steps below: