The tool allows adding and monitoring a large number of cameras simultaneously. The cameras in your network can be automatically found and installed. The program supports IP and P2P connection modes as well as UMSP, HZXM, and HZZN protocols. It could also be necessary to provide the camera’s password to access it. After this step, the devices can be organized by grouping them into different folders. For monitoring purposes, it is possible to divide the workspace into up to 64 regions. Moreover, on the left, there is a panel, from which you can control the selected camera.

In addition to allowing the users to view live video streams, the program also lets you schedule recording sessions and play them later. Likewise, it can take snapshots of specific video frames. Moreover, you can implement alarms to send notifications to a given SMS number.

All in all, QmEye is an excellent solution in terms of the number of cameras and connection protocols allowed. Unfortunately, the tool is not as easy to use as other similar tools and its graphical user interface probably needs a redesign.

This manual has mainly instructions on the installation and usage in Android, iPhone mobile phone.

1.Android

This cloud service platform is the best mobile phone video during the internet era. It consists of front-end acquisition devices, platform servers, and remote view of three parts.

Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application.

Icon description：

Notice: Please click “LoginFree”, directly into the system, without verifying user name and password. And you can get help information without login.
1.1 User register
User register

Click the button “register” on the login menu, then will jump to the register interface.

Enter the register information, click “register” then will be registered.
Note:1 please enter the valid E-mail address in order to retrieve your password when you lost it.

2 No account login version, no such function! 

retrieve the password

On the register clicking the button “login” and jump to “retrieve password” interface.

Input the username, click button “retrieve password”.

If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.

QMeye User Manual 2024

1.2 Real-time preview

In the main menu, clicking “real-time preview
Click “Favorites” button, go to “collection management” interface

Click on the icon, favorites list change into editing state, click icon, you can delete your favorites.
Select one of the devices on “Live list” enters the video preview interface.

Button instruction：

1.3 device management

Click the button” device management” on the main menu and enter “device management” interface.

Icon instruction：

Modify the connection parameter

Click on the icon, select “modify connect parameter”, then into “modify device” dialog box：

A）Click on the icon, return to the device management lists.
B）Click on the icon, save the current configuration.

Modify the name

Click on the icon, select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box.

A）Click “OK” button to save the current configuration.
B）Click “cancel” button to cancel the modifying.
Delete

Click on icon, select “delete’ button to delete the current device directly
Add the catalogue

Click on icon, select “add the catalogue” option, then pops up “add the catalogue” dialog box

A）Click “OK” button, it will be saved the current configuration. Then will be showed in the device management list.
B）Click button “Cancel” to cancel to add the catalogue.
Add the device

Click on the icon to select “add the device” option.

Icon instruction

Add the shot

Please see the operation introduction of “add devices”.

Search the local device

Click on the icon to enter “search” dialog box. If there are some devices in local place, you would search out the corresponding device.

Icon instruction

Click on the icon, then pop up the menu as follows:

A）Add a device: add DVR (multi- channel)
B）Add a shot: add a single camera (single channel)
C）Modify the name: modify the name of the device or shot
D）Modify IP: Modify the IP address, subnet mask, gateway information
E）Modify the device password

1.4 Playback

Click button “playback” option in the main menu, and then select to playback the video.

After select an event type, start time and end time, clicking on the icon will list out the remote video lists, and then click on the item will be selected to play or download videos.

1.5 Alarm management

Click the option of “alarm management” in the main menu

Icon instruction：

Guard

Click on the icon to select “guard” option, pop up the dialog box as follows:

Select the option those need to alarm and click the button “setup” to save the current settings; Click the button “cancel” to cancel the current settings.

Unguard

Click on the icon to select the button “unguard”, cancel the current camera setting.

Note

Click on the icon to select “note” option, and then pop up the dialog as follows:

A）SMS notification: set the cell phone number of alarm notification
B）News push: open/ close the news push setting
In the notification interface, and then into “SMS notification” interface

Icon instruction

Record

Click on the icon to select “record” option, and then pop up the dialog of “alarm record”

The icons instruction

1.6 Local playback

Click on “local playback” option in the main menu, and then into the interface as follows

Click on the icon, the local playback video list change to editing states.

Select the video options that you want to delete, and then click the icon; you can delete the selected local video.

1.7 Image view

Click on “images browsing” option

Click on the icon, the local playback video list change to editing states.

Select the image options that you want to delete, and then click on the icon to delete the selected local images.

1.8 Modify password

Click on” modify password” option in the main menu, and then into the interface as follows:

Click on the icon to save the current modified password.

1.9 Local configuration

Click on “local configuration” option in the main menu, and then into the interface as follows

Function instruction：

Click on the icon to save the current configuration.

.

.

.

.

.

.

.

.

.

.

.

.

2、iphone

.

Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application.

Icon description：

Notice: Please click “LoginFree”, directly into the system, without verifying user name and password. And you can get help information without login.

.

2.1 User register

User register

Click the button “register” on the login menu, then will jump to the register interface.

Enter the register information, click “register” then will be registered.
Note: 1 please enter the valid E-mail address in order to retrieve your password when you lost it.

2 No account login version, no such function! 
retrieve the password

On the register clicking the button “login” and jump to “Retrieve password” interface.

Input the username, click button “retrieve password”.
If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.
.

2.2 Real-time preview

In the main menu, clicking “real-time preview
Click “Favorites” button, go to “collection management” interface

Select one of the devices on “Live list” enters the video preview interface.

  

Button instruction：

2.3 device management

Click the button” device management” on the main menu and enter “device management” interface.

Icon instruction：

Modify the connection parameter

Click on the icon, select “modify connect parameter”, then into “modify device” dialog box：

A）Click on the icon, return to the device management lists.
B）Click on the icon, save the current configuration.
Modify the name

Click on the icon, select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box.

A）Click “OK” button to save the current configuration.
B）Click “cancel” button to cancel the modifying.

Delete

Click on icon, select “delete’ button to delete the current device directly

Add the catalogue

Click on icon, select “add the catalogue” option, then pops up “add the catalogue” dialog box

A）Click “OK” button, it will be saved the current configuration. Then will be showed in the device management list.
B）Click button “Cancel” to cancel to add the catalogue.

Add the device

Click on the icon to select “add the device” option.

Icon instruction

Add the shot

Please see the operation introduction of “add devices”.

Search the local device

Click on the icon to enter “Device search” dialog box. If there are some devices in local place, you would search out the corresponding device.

Icon instruction

Click on the icon, then pop up the menu as follows:

A）Add a device: add DVR (multi- channel)
B）Add a shot: add a single camera (single channel)
C）Modify the name: modify the name of the device or shot
D）Modify IP: Modify the IP address, subnet mask, gateway information
E）Modify the device password
.

2.4 Playback

Click button “playback” option in the main menu, and then select to playback the video.

After select an event type, start time and end time, click the button OK will list out the remote video lists, and then click on the item will be selected to play or download videos.

2.5 Alarm management

Click the option of “alarm management” in the main menu

Icon instruction：

Guard

Click on the icon to select “guard” option, pop up the dialog box as follows:

Select the option those need to alarm and click the button “OK” to save the current settings; Click the button “Cancel” to cancel the current settings.

Unguard

Click on the icon to select the button “unguard”, cancel the current camera setting.

Note

Click on the icon to select “note” option, and then pop up the dialog as follows:

A）SMS notification: set the cell phone number of alarm notification
B）Message push: open/ close the news push setting

In the notification interface, and then into “SMS notification” interface

Icon instruction

.

Record

Click on the icon to select “record” option, and then pop up the dialog of “alarm record”

The icons instruction

.

2.6 Local playback

Click on “local playback” option in the main menu, and then into the interface as follows

Click on the icon, the local playback video list change to editing states.

Select the video options that you want to delete, and then click the button “delete”; you can delete the selected local video.

2.7 Image view

Click on “images browsing” option

Click on the icon, the local playback video list change to editing states.

Select the image options that you want to delete, and then click on the button delete to delete the selected local images.

2.8 Modify password

Click on” modify password” option in the main menu, and then into the interface as follows:

Click on the icon to save the current modified password.

2.9 Local configuration

Click on “local configuration” option in the main menu, and then into the interface as follows

Function instruction：

Click on the icon to save the current configuration.

.

.

QmEye_PC_Client_

1、Install

Double-click to open QmEye installation file, pop up following the installation wizard(The version number may be different, but not influence use)

.

Click “next” until the following interface, click the “install”

.

After the installation of software, pop-up window as follows:

.

Click “finish”

.

.

.

.

2.1 Login

Start the application, the program into the landing interface, as shown in P2-1

.

P2-1 Login

  Enter account and password to log in. If the user does not have the account , you can apply for to register.  And local login is permitted.

2.2 Register

Clicks the “register” on the login interface, enter the registration screen, as shown in P2-2.

.

P2-2 Register

With * is required, fill in and then click the “register”.

2.3 Password lost

If users have account, but forget the login password.You can through the e-mail to retrieve password. Click “Password lost”, Enter the following interface

.

图2-3 Password lost

  Mail QueryL: Check the reserved E-mail information when registering.

  Retrieve Password: System will send an email to the email, according to the prompt to reset the login password

2.4 Main Interface

  After the success of the user login, enter the main interface, as shown in P2-4.

.

P2-4 main interface

  Main interface is divided into four parts, including at the top of the navigation bar(P2-5), he left menu bar – device list and function(P2-6), in the middle of the play rect(P2-7), And at the bottom of the play controls(P2-8)

.

P2-5 Navigation bar

.

P2-6 Device list and function

.

P2-7 The play rect

.

P2-8 Play controls

  The description of each icon function as the following:

2.5 Control panel

.

Picture 2-9 control panel

  .

Screen locking: Lock the screen, in the lock case is not able to do any operation in current interface apart from unlocking.(PS: It is not permitted, on local login mode.)

Log off: logout the client

Playback: to playback the remote video and local video

Photos: view local images save by capture

Password Correcting: modify the user logon password(PS: It is not permitted, on local login mode.)

Alarm Settings: set the front-end device booted and alarm monitoring types(PS: It is not permitted, on local login mode.)

Device Searching: search all device which in LAN

DeviceAdministration: for operation such as rename, add, delete a device.

2.6 Add the Device

2.6.1 Quick Add

     “Control Panel” ->” Device Searching”, then pop up the device searching interface, as shown in P2-10

.

P2-10 search the device

  .

     Select out a device is searched, and then click “add to the list” filling device login ID and password, as showed in P2-11

.

P2-11 add a device to lists

.

Parent directory: add the camera to specific catalogue

Scene name: add to the display name of the user to the device lists.

Username: login username of the device

Password: the login password of the device

Channel NO: view what channel number, start from 1. Completed IPC as 1

Streaming: request to a front- end device stream format while live preview, default is sub stream. Fulfill the above information: after finished, click “add” button

.

.

图2-12

2.6.2Add the device manually

  .

“Control the panel” ->”Device management”, then pop up the device management interface, as shown in figure 2-13

.

.

Picture 2-13 device management

Firstly, select a directory from the device list box, then click “add the cameras” enter the added interface like the following figure:

.

Picture 2-14 add cameras

  .

     Device name: the display name that you add to the user device list, more convenient to people identify (such as living room)

    Device type: lens (the channel of the IPC, DVR\NVR), device (such as DVR\NVR)

    Connection modes: (IP address and port access mode), P2P (cloud- penetration mode)

    Protocol: select the front-end device protocol

Cloud ID: front-end device ID to identify the device, P2P mode exclusive.

Username: the login username of device

Password: device login password

    Channel NO: view what channel number, start from 1. Completed IPC as 1 (if it is the device type, it is the channel number mean: complete 8 if is 8Channel DVR)

    Stream: request to a front- end device stream format while live preview, 0 is main stream,1 is sub stream, default is sub stream.

.

2.7 Alarm setting

“Control the panel” ->”alarm configuration”, then pop up the alarm setting interface, as shown in figure 2-15

.

.

Picture 2-15 alarm setting

     Guard: start 4 alarm types monitoring which you tick

      Unguard: cancel all alarm types monitoring

PC Push: after booting and the related equipment alarm is triggered, the server will push the information to the PC client and prompt the user

Add number: add SMS notice number

Delete number: delete SMS notice number

Turn off the alarm: turn off the alarm, which the PC client is no longer to prompt the push information of device trigger alarm

Open the alarm: turn on the alarm, which the Pc client will prompt the push information of device trigger alarm.

View the alarm information: after starting current PC to view all alarms push messages.

    .

2.8Video playback

2.8.1 Remote video playback

  .

“Control the panel” ->”video playback”, then pop up the video select operation interface, (as shown in figure 2-16), select “remote video” then into remote video playback interface, as shoun in figure 2-17

.

.

Picture 2-16 video types select

.

.

Picture 2-17 remote video playback

      Select a device and set up the query time then click it to acquire the relevant video information. as shown in figure 2-18

.

Picture 2-18 remote video lists

.

  Double click a video to play in the video lists (as follows), double click the playing interface can be full screen.

.

Picture 2-19 remote video playback

2.8.2 Local video

“Control the panel” ->”video playback” -> “local video”, then pop up the local video interface, (as following:

.

.

    Select the local video date that need to view. Query the related video and double click to play.

.

IP Camera

IE Browser User Manual

Preface

Thank you for using our IP camera products. This series of products are all-in-one IP cameras designed for network video surveillance, including box IP camera, infrared box IP camera, dome IP camera, speed dome IP camera, etc. The products adopt high performance and powerful single SOC chip media processor to integrate audio and video capture, compression and transmission. Standard H.264 Baseline and Main Profile coding algorithm ensures clearer and smoother video transmission effect. Built-in Web Server allows users to easily perform real-time monitoring and remote control over front-end cameras via IE browser.

This series of IP cameras is suitable for small and medium-sized enterprises, families, and other environments that require remote network video transmission and monitoring. It is easy to install and operate.

.

.

.

Statement:

.

.

.

.

Readership:

  This manual is suitable for engineers as follow:

.

Notes:

Viewing Station Network Settings

Learn about the required network settings for Verkada viewing stations

This article outlines the required settings that your Verkada viewing stations need to communicate with Verkada Command and to operate properly.

Requirement: Verkada devices are incompatible with LANs that require the use of proxy servers or that require Secure Socket Layer (SSL)/Transport Layer Security (TLS) inspection. If either are in use, a bypass for all Verkada devices must be implemented for Verkada devices to communicate with Command.

IP address

Viewing stations need an IPv4 address to communicate to Command through the internet. Viewing stations use Dynamic Host Configuration Protocol (DHCP), User Datagram Protocol (UDP) ports 67 and 68, to obtain their IP addresses and network configurations—on a wired or wireless internet connection.

If you want to have a specific IP address on your viewing station, set a DHCP reservation using the device’s Media Access Control (MAC) address (found on the device’s label).

Domain Name System

Viewing stations use the Domain Name System (DNS) server to resolve Verkada’s fully qualified domain names (FQDN) to IP addresses to communicate with them. Your DHCP server tells the viewing station where the DNS server is on the network and the viewing station communicates using UDP port 53.

Note: DNS over HTTPS (DoH) is currently not supported.

Firewall settings

Verkada devices require access to many endpoints to have the full-featured experience. Many customers may want to restrict devices to only communicate with the specific required endpoints.

These are the general domains to allow, applicable for all organization-regions:

Region: United States

Note: Your region is selected when you create an organization in Command.

Region: Europe

Note: Your region is selected when you create an organization in Command.

.

Set Up Smart Tiles on the VX52

Learn how to set up smart tiles on the Verkada VX52 Viewing Stations

The Verkada Smart Tiles feature provides a way to display the most notable options from access events, sensor events, and notable camera data and data sets. Admins can remotely manage the Verkada VX52 Viewing Station, select video feeds and Smart Tiles to display, and customize layouts.

Verkada Viewing Station setup and user guide

Read Also : How to Configure the Light Settings on Hikvision Cameras

Find the smart tiles for your VX52

Once you set up your VX52, you can configure the tiles on the VX52 and add smart tiles.

Choose the type of smart tiles to add

There are 3 different types of Smart Tiles you can add to your VX52:

Active Area

Displays the camera with the most motion. To change which camera(s) display on the active area tile, select the tile to see the information panel where you can select from the following options:

Access Control

Displays all most recent door events, including any door event that you would see indoor history, such as:

Sensor Readings

Displays the air quality readings of your choice. From the Customize Data tab, you can select a sensor reading when you select the sensor tile. See Air Quality Sensor Readings.

Set Up Your Viewing Station

Learn how to set up your Verkada Viewing Station for live viewing

The Verkada Viewing Station provides a plug-and-play solution to stream multiple camera feeds simultaneously on a display with no local configuration needed.

Step 1: Connect your viewing station

When you open your box, you should find an HDMI cable, a power cord, and a viewing station remote. You only need to provide an Ethernet cable. See Viewing Station Network Settings.

Once you take the viewing station out of the box, follow these setup steps:

Step 2: Claim your viewing station

Note: You must be an Org Admin to ensure you have access to all devices on your viewing station and to claim the viewing station.

Find your viewing station’s serial number

The are 2 ways to find the serial number:

Step 3: Configure your viewing station

Find your viewing station

To find your newly added viewing station, go to the Devices page and filter for viewing stations.

Edit the viewing station name (optional)

To edit the name of the viewing station, select its name at the top of the page and enter a unique name.

Add camera tiles and Smart Tiles

Note: You can add up to 10 pages and up to 30 live feeds per page.

Add Verkada viewing station admins

Note: You need to be Org Admin to ensure you have access to all devices on the viewing station.

A device that is moved to a different site (where the user does not have access) causes the same issue. It’s possible for an org to have sites that an Org Admin does not have access to, but they can grant themselves access.

Step 4: Configure viewing station settings

1.On the viewing station page, click Settings.

2.On Settings, you can view the current settings or delete the viewing station, if needed.

The Settings menu consists of the following options:

• Offline Alerts—Receive offline alerts for the viewing station, and select a list of users who can receive those alerts.

• Show Labels—Toggle that displays labels on the camera live feeds. If you toggle off this setting, you can only view the live feeds of the cameras and not the camera names.

• Enable Cloud Streaming—Use this setting if the cameras are remote from your location to prevent live streaming remotely or allow live streaming remotely. When this setting is toggled off, only cameras that are local to you will live stream.

• Test Offline mode—The viewing station still streams locally if the network connection is lost, and simulates a network outage on the viewing station.

• Enable Low-Latency Streaming—When cameras are fully updated and local to the viewing station, they stream with low latency.

• Copy Existing Viewing Station—Copy live feed configurations and viewing station settings from other viewing stations in your org.

Configure Wi-Fi

Note: Wi-Fi support on the viewing station requires Verkada software version 2.2.0 (137) or higher. You can find the software version and the serial number in the Device section (below Wi-Fi). If your viewing station has not yet automatically updated to this software version, please contact Verkada Support.

Copy an existing viewing station

You can copy live feed configuration and viewing station settings from other viewing stations in your organization.

Restart viewing station

The viewing station becomes unavailable for a few minutes while it restarts.

.

Configure Motion Tiles

Motion tiles for the Verkada Viewing Station (VX51 and VX52)

The Verkada Motion Tile feature enables the viewing station to intelligently select video feeds that are most important and brings them into a dedicated tile. This designated motion tile switches to feeds where a significant amount of motion is detected, allowing viewers to quickly see important activity and take any necessary action. You can configure motion tiles to search for activity across one or more sites, or even across an entire organization.

Configure the Motion Tile feature on VX51

Configure the Motion Tile feature on VX52

See how this works

Watch this video to see how this feature works

Finished Motion Tile (example)

.

VX51 Viewing Station Click to Expand

Learn how to use this feature with a VX51 viewing station

You can use the Click to Expand feature to enlarge a selected tile to full screen.

Required. To utilize this feature, you must have a mouse connected to your Verkada VX51 viewing station.

Access the Click to Expand feature

.

This user manual is designed to help you understand how to integrate your cameras and digital video servers with GSurf_Prov2 software.

Note

This document is subject to change without notice. The latest electronic version of this user manual is available for download here:

http://www.grandstream.com/support

Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.

PRODUCT OVERVIEW

Feature Highlights

Figure 1: GSurf_Prov2 Overview

GSurf Pro Setup and User Guide

Read More : XMEYE VMS PC CLIENT Setup Guide

INSTALLATION GUIDE

Minimum Computer System Requirement

Note

UPS is required for SERVER to prevent database or video record file corruption caused by power outage.

Install Gsurf_Prov2

Click to run the GSurf_Prov2 installation .exe file. Follow the instructions in the prompted windows to start installation. Once done, the following screen will show.

Figure 2: GSurf_Prov2 Installation

Uninstall Gsurf_Prov2

To uninstall GSurf_Prov2, in your windows PC Start Menu->Programs->GSurf_Prov2, click on Uninstall GSurf_Prov2 to start uninstall process. Or you could uninstall the program from your windows PC’s Control Panel.

Login Gsurf_Prov2

Click to run GSurf_Prov2. The login page will prompt for your User ID and Password. The administrator User ID and Password are both set to admin at the factory default settings.

For security purpose, please change the password after the first time you log in to GSurf_Prov2.

.

Figure 3: GSurf_Prov2 Login

Gsurf_Prov2 Main Window

The GSurf_Prov2 user interface is designed for ease-of-use to offer quick access to cameras and recording in the system. Please refer to the following figure and table for main window descriptions.

Figure 4: GSurf_Prov2 Main Window

Table 1: Gsurf_Prov2 Main Window Items

Gsurf_Prov2 Toolbar

Table 2: GSurf_Prov2 Toolbar Icons

Gsurf_Prov2 Video Play Bar

In the video display window, each video channel has a play bar on the bottom.

Figure 5: GSurf_Prov2 Video Display Window – Play Bar

Table 3: GSURF_Prov2 Video Play Bar Icons

CONFIGURATION GUIDE

After installing GSurf_Prov2, it must be configured for your network cameras or digital video servers. This section describes how to configure GSurf_Prov2, as well as how to set up auto recording, motion detection, alarms and etc.

Add/Delete Device

Add Device

1. In the top Menu bar, click System Config(C)->Device Config(D).

2. In the Device Configuration window, click Add button to open the Add Device dialog.

3. Enter the device information.

4. Click Ok to save.

After successfully adding the device, users could view the video by double-clicking on the device name in the Device browser panel on the left.

Figure 6: Add Device

Figure 7: Video Display After Adding Device

Delete Device

1. In the top Menu bar, click System Config(C)->Device Config(D).

2. In the Device Configuration window, Select the device to be deleted.

3. Click Delete button.

4. Or, users could click on Delete all to remove all the added devices.

Figure 8: Delete Device

Search Device

The built-in Search tool in GSurf_Prov2 allows user to search all the DVS and IP Camera devices within the same LAN. Additionally, users could modify the IP address for the devices listed in the searching result.

Search Device

1. In the GSurf_Prov2 toolbar, click  button.

2. In the Search tool, click Search button. A list of surveillance devices will display in the list.

Figure 9: GSurf_Prov2 Search Tool – Search Devices

Configure Time Schedule

The GSurf_Prov2 time schedule is used to configure automatic recording. Up to 10 schedules can be configured.

1. In the top Menu bar, click System Config(C)->Time Schedule(T).

2. The Time Schedule window will pop up.

3. Select a schedule on the left panel to be configured.

4. Select the time frame for each day. The scheduled interval will be marked in blue (See Figure 10: Gsurf_Prov2 Time Schedule).

5. Click Save button.

Figure 10: Gsurf_Prov2 Time Schedule

6. To assign this schedule to a device, open System Config->Device Config.

7. Select the device from which you would like to record the videos.

8. In Auto Record option, select schedule from the drop down list.

9. Click Save button.

This channel will then start automatically recording as specified in the designated time schedule.

Additionally, users could select Batch Configuration to assign the same time schedule to multiple devices.

Figure 11: GSurf_Prov2 Auto Record Time Schedule

Configure Alarm Triggers and Rules

Grandstream’s network cameras and digital video servers support motion detection and alarm events. They can report motion detection or alarm events to GSurf_Prov2. On the GSurf_Prov2 side, it can be configured to take actions, i.e., to notify such events to users. Up to 10 rules can be set up with different alarm actions. The instructions below will assist you with this setup.

1. In the top Menu bar, click System Config->Alarm Config.

2. In the Alarm action rule window, select the Alarm index and configure the action.

3. Click Save button to save the settings.

Figure 12: GSurf_Prov2 Alarm Action Rule

4. To assign this alarm action rule to a device, open System Config->Device Config.

5. In the Device Configuration window, select the device.

6. Select an Alarm action rule for Motion Detection to monitor motion detection events. Or to Other Alarm for other types of conditions such as abnormal reboot.

7. Click Save button to save the settings.

Figure 13: Assign Alarm Action Rule To Device

Additionally, users could select Batch Configuration to assign the same alarm action to multiple devices.

Local Configuration

Click on System Config->Local Config to configure software and local recording features for GSurf_Prov2.

Software Configuration

Configure log reserved days, video window layout and startup options.

Record Config

Figure 14: GSurf_Prov2 Local Configure – Record Configure

Device Configuration

Click System Config->Device Config, the device configuration window will prompt for users to add, delete and edit devices. Once a device is selected, users could configure the device properties, alarm action rule and record option.

Language Display

In the GSurf_Prov2 interface, users could switch language at any time. Go to System Config->Language and select the language to be displayed.

Figure 15: Language Display

Record Configuration

Manual Record

In the video display window, click on the Record button  to start recording.

Figure 16: Manual Record

Automatic Record

The automatic record will be running in the background. The recording time is specified in Auto Record option after selecting device under System Config->Device Config.

Figure 17: Automatic Record

Note

It is recommended to use continuous recording only and not combine it with recording by motion detection.

Replay

Both the GSurf_Prov2 Replay v2 (GXV36xx Models) and Replay v3 (For GSC36xx Models) tools provide the ability to replay recorded videos. These tools also provide a search function which allows you to perform a search based on start time, end time, IP address, channel and etc. To replay the recorded video, in the top Menu bar, go to Manage Tool->Replay Tool to open the Replayer. Select time, device, channel, file type and disk to search the video. Then click on the video file to play.

Figure 18: Replayer v3

In the Replayer, users could also open up the Time selection tab to specify the recorded files by filtering the start time. All the configured start time will be marked in green in the time chart.

Electronic Map

E-map is an important feature in video surveillance system to provide users a visual overview of the cameras in your installation. A map is an image file on which you place cameras and views. GSurf_Prov2 supports an electronic map for users to identify the locations of your cameras and the status of their alarms.

To configure E-map on GSurf_Prov2, open the map browser by clicking  in the toolbar.

Add Map

1. In the Electronic map browser, right click and Add map option will show up.

2. Choose a map image from your local PC to upload. Then it will be displayed in the electronic map field.

Figure 19: Add Map

Note

The supported image files are bmp, jpg or gif. GSurf_Prov2 will display the electronic map in full resolution. And the users can use the scroll bars to view the whole image.

Add Device to Map

1. Open your map in the main window.

2. In the left side panel, click on Device browser so your devices will show in the list.

3. Click on the device/channel, drag and drop it to the preferred destination on the map.

4. An icon with the device name and the channel number will now be shown on the map. Right click on the icon to change the icon settings.

Figure 20: Add Map Alarm

Set Alarm on Map

1. After adding the device to the map, go to System Config->Alarm Config to configure alarm action rule. Make sure the option Warning on the E-map is checked.

2. Go to System Config->Device Config. Select your device and configure the alarm action rule set up in step 1.

3. When GSurf_Prov2 receives an alarm report, the corresponding icon on the map will flash in red .

Lock/Unlock Map

To avoid changing the positions of cameras on the map accidently, the users can lock the map after adding all devices.

Right click on the map, lock/unlock option will be available in the pop-up menu, When the map is unlocked, users could drag devices to the map. When the map is locked, double-clicking on the camera will open up a new window for real time video from this camera.

Remove Device from Map

On the map, right click on the icon and click Delete Icon to remove the device from the map.

Remote Configuration

The IP Camera devices can be remotely accessed via web browser. Select a device on the left side panel and click on Remote config tab to access the camera’s web GUI.

Figure 21: Remote Configuration

PTZ Control

In the toolbar, click  to open PTZ control panel. If the connected devices are PTZ cameras or have a PTZ device connected, users can use the console to adjust the focus, brightness, contrast, rotating speed, IRIS, and also pan/tilt the devices.

Note

Before using PTZ control, PTZ device needs to be set up in RS-485 port and properly configured.

Video Monitor

Individual View

Drag the device from the device browser to video display window to watch the video immediately.

Group View/Patrol Mode

1. In the tool bar, click on  to open the Group view panel.

2. Drag the device in Device browser panel to the group in Group view panel.

Figure 22: Add Device To Group

3. Right click on the group to configure the group attributes. Check the Allow Patrol option and configure Pause time which is the patrol interval for the group.

Figure 23: Configure Group Attributes For Patrol Mode

4. Click Ok to save the settings.

5. In the top Menu bar, click on Play Mode->Patrolling View to start playing videos from different groups in a loop.

Synchronize Device Time

In the top Menu bar, click on Manage tool->Synchronize device time. Then users could sync up the device time with local PC time.

Figure 24: Device Time Configuration

Convert Video Format

The recorded video is saved in H264 format, which might not be supported by certain video players. An AVI converter tool is provided in GSurf_Prov2. Click on Manage tool->AVI Conversion Tool to open the converter. Add video to be converted and the output file will be saved in the configured directory in AVI format.

Figure 25: Media Convert Tool

User Management

The GSurf_Prov2 administrator can add, modify and delete users as well as issue users different privilege levels.

1. Click on Manage tool->User Manage.

2. In the User Manage window, users could add, edit and delete users. A list of configuration authorities is provided so each user could be assigned with different privileges.

Figure 26: User Management

Import/Export Configuration

The GSurf_Prov2 configuration can be imported or exported for backup and restore purpose. Click on System Config->Export/Import Config to open the import/export window. Users could also select the configurations for the backup file.

Figure 27: Configuration Import and Export

GSURF_PROV2 TRANSFER SERVER

The GSurf_Prov2 embedded transfer server can cooperate with client side to effectively reduce the workload on the front-end cameras. The surveillance system utilizes the transfer server as the medium to monitor the devices in a distributed manner.

Server Side

1. Open the Transfer server from Manage Tool->Tran Server. A login window will pop up.

Figure 30: Transfer Server Login

2. After login, click on Config->System Config to open the following server configuration window. The listening IP address is the PC’s IP address. For the port number, it is recommended to use default value or big value.

Figure 28: Transfer Server Configuration

3. Click on  to open the search tool.

4. In the search tool, press Search button to get a list of devices in the same LAN.

5. Select the devices in the result list and click Add.

Figure 29: Add Devices to Transfer List

6. Those devices will then be displayed in the transfer list.

The main display window will show the traffic status when the traffic starts.

Client Side

The client side is the GSurf_Prov2 RTSP server.

1. In the Device browser, right click on RTSP server.

2. Click Server Config to add devices to the local list.

Figure 30: RTSP Server

GSURF_PROV2 FILE SERVER

Server Side

The file server can provide the record files in local disk to other hosts within the network for search, download and replay. To configure the GSurf_Prov2 as the file server, go to Manage Tool->File Server. Click on the Configuration button to set up listening IP and port. Then start the server.

Figure 31: GSurf_Prov2 File Server

Client Side

The client side is the replay tool in the GSurf_Prov2. Go to Manage Tool->Replay Tool to open the Replayer. Once searching is done, the record files can be downloaded and played locally.

Figure 32: Replayer Remote Search

HTTP SERVER

GSUpgrade Tool

This HTTP server allows user to configure a local HTTP server on the same machine running GSurf Pro which can be used to execute firmware update from this tool on IP Cameras either one by one or via batch upgrade by selecting them all. Go to Manage Tool->HttpServer. Click on the Configuration button to set up listening IP and port. Then start the server.

Figure 33: GSurf_Prov2 HTTP Server

FREQUENTLY ASKED QUESTIONS

Q: How many cameras does GSurf_Prov2 support?

A: The GSurf_Prov2 can support up to 10 groups or 72 channels cameras at the same time. However, when using HD camera (720P and up), the maximum number might be limited by the PC processor. When displaying multiple videos, the GSurf_Prov2 will adjust the display to secondary stream to increase system resource efficiency. If users click on one of the video, the display will be automatically converted to primary stream for better quality.

Q: Does GSurf_Prov2 have any requirement on the PC where it’s installed?

A: Yes. Please refer to section [Minimum Computer System Requirement] for details. Before installing GSurf_Prov2, it is recommended to evaluate the system requirement (network traffic, disk space, file directory and etc.).

Q: Is there any requirement on the transfer server?

A: In most of the cases, the transfer server will have large amount of network flow going through. Therefore, it is recommended to use the machine with Gigabyte network interface card.

Q: What are the factors that might affect the disk space?

A: The disk space is mainly affected by the primary stream bit rate. Normally HD video will take more space than standard definition video.

Q: I have configured the alarm action on GSurf_Prov2 already but I still didn’t get alarm. Why?

A: Besides configuring alarm action on GSurf_Prov2 side, the alarm has to be activated on the camera side and configured to report to the alarm center. Users could configure this by directly accessing camera’s web GUI or via GSurf_Prov2’s remote configure interface.

EXPERIENCING THE GRANDSTREAM GSURF_PRO

Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products.

We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support.

Our technical support staff is trained and ready to answer all of your questions. Contact a technical support member or submit a trouble ticket online to receive in-depth support.

Thank you again for using Grandstream GSurf_Prov2 Network Video Surveillance System.

.

Titanium CMS NVMS 2 User Guide, NVMS Lite is a newly integrated security management platform released by TVT, featuring seamless access to all TVT’s products and encoding devices of the famous manufacturers in the industry (like Hikvison, Dahua, etc.). With the powerful capability of video surveillance management, real-time preview, record storage, record playback, record download, alarm linkage, decoding on TV Wall and keyboard control are supported.

Additionally, due to its small, exquisite, flexible and diverse deployment, NVMS Lite can meet various demands of small-sized projects and can be widely used in the video surveillance of industrial park, education, banking, chain stores, buildings and transportation.

If you see the CPU and Memory red and maxed out while trying to see live view, follow the steps below. 

Log into NVMS.

Click on Edit Common Function. (If you have this function already, skip to the next step)

Titanium CMS NVMS 2 User Guide

Read More : NVMS 2 Installation Guide

Select Local Configuration and click OK. 

Click on Local Setting.

Under Decoding Mode, select Soft Decoding and click Apply. 

At the top, select Overload Setting.

Select max CPU and Memory.

Close NVMS and don’t save live view settings.

Restart NVMS. The changes made will help lower overloading. If it’s still maxing out and struggling to stream live view, consider changing the stream to sub stream, lowering the resolution on the cameras and not using any other applications in the background. 

Link to video:
https://app.screencast.com/AjNAFgyJz4jQN

Plate Capture Export on NVMS / Monitor Client

NVMS1000 Notice

The NVMS1000 program is EOL. 

3.4.5 is the final version for the software with 3.0 recorders. No future updates.

Recorders on the Titanium Interface will require the use of NVMS 2.0 Lite(256 Ch free) or Standard (32 Ch free)

Windows:
https://drive.google.com/drive/u/0/folders/1nOxFnJBzBmqln2mUiD0Uo7GRInsj1shl ​​​​​​

Mac (NVMS Lite ONLY): 
https://drive.google.com/drive/u/0/folders/1noAUhQbofFP8natvOt4WsVNJigxRQvOs

Installing NVMS 2.0 Lite (2.1.1)

Default username: admin

Default password: 123456

Download and run the NVMS Lite exe.

https://drive.google.com/drive/u/0/folders/1tarCVJie8corwQIx46_OGde6k3Nc6SOR

Click “More Info” when the splash screen displays.

Click “Run Anyway”

Select your desired language and click “OK”

Read the software license agreement and select the “I accept” option and click “Next” to continue.

Click next on the next screen. (Note: You may change the install directory by clicking “browse”)

Click “Finish” to complete the install.

You may use the drop down menus under “Question:” to select security questions. Otherwise, hit “Skip”.

Once the software launches, you will need to select a record partition.

Live View NVMS 2.0 (2.1.1)

Select “Live View”

You may use the “area” (house icon) to call the cameras within the area. Alternatively, you may call the cameras individually.

To call a channel you can either drag and drop OR select a channel within the layout then double click the channel.

You can modify the channel layouts by selecting them at the bottom of the screen. The arrow will provide additional options.

The full screen button will expand your active channels to full screen. Press Escape on your keyboard to exit the mode.

Select OSD to toggle the On Screen Display Overlay. This setting is off by default. Enabling will make the NVMS 2.0 create an overlay with the Device and channel name.

The audio enable button will start audio on the selected channel. The camera must be audio capable for this function to work.

The Intelligent function sense button will toggle the intelligent function overlays. (e.g. line crossing, intrusion, etc)

The close stream button will close all active streams.

The “Save View” button will allow you to name the active channel layout and save it.

To call the saved view, click the “View” button on the sidebar. This section will contain any saved views.

Playback on NVMS 2.0 (2.1.1)

Click on “Storage Playback”

Select the device & channel you want to perform playback on.
Use the calendar icon to select the date, then press search.

When you highlight a channel, the device will report whether footage is present or not by shading the day.

If you wish to synchronize the display please click the “Sync/Async” button to toggle the option.

You can change the Storage Playback layout by selecting the desired channel configuration.

To call the footage you can drag and drop the channel or area into a blank space.

Use the “Full Screen” Button to turn on full screen mode. Press escape to exit.

Select OSD to toggle the On Screen Display Overlay. This setting is off by default. Enabling will make the NVMS 2.0 create an overlay with the Device and channel name.

The close stream button will close all active streams.

You can slow down the speed of the footage by clicking the “Slow” button. Note: You can slowdown the speed multiple times. Allow for a few seconds to switch mode.
You can terminate the playback stream and close the channel by clicking the “Stop” button.
You can fast forward the footage by clicking the “Fast” button. Note: You can speed up the playback multiple times. Allow for a few seconds to switch mode.

Use the “Pause” button to pause playback.
The << 30S button will rewind 30 seconds.
The 30S >> button will jump forward 30 seconds.

The “Back up start time” button will mark the start of the footage back up. (Scissor icon pointing left)
The “Back up end time” button will mark the end of the footage back up. (Scissor icon pointing to the right)
The “Download” button will redirect you to Record Management and Download the clip.

NVMS 2.0 Channel Group Control (2.1.1)

Click “Channel Group Setting” under “Resource Management”

Click add

Enter a “Channel Group Name” 

Select the desired cameras for the group

Click the right arrow to add the checked cameras into the group

Click OK

Repeat the process for additional camera groups

Be mindful of the “Parent Channel Group” – leave blank to keep at the same level

Open a Live View Tab

Drag and drop the Channel Group to begin streaming

Export/Import NVMS-1000 Configurations- Windows

Please make sure you are logged into NVMS-1000 prior to continuing with the following steps :

Step 1- Please select the Control Panel option located above

Step 2- Under Basic please select- Backup System Config

Step 3- Select Browse – Create file name and select the location you wish to back up the Backup File(Dat) 

Step 4- Select Save once Step 3 is completed

Please note: Once you confirmed the files have been exported successfully.  Please proceed with Importing NVMS-1000 configuration.

NVMS Importing:

Step 1- Please select the Control Panel option located above

Step 2- Under Basic please select- Restore System Config

Step 3- Select browse and Open the Exported file you created

Once the file is selected please select Ok 

Please note: NVMS-1000 Application will close out but will open automatically reflecting the correct configuration exported. 

Adding P2P Device to NVMS 2.0 (2.1.1)

Click “Resource Management”

Click “Add”

Click “Manually Add”

Click in the blank section next to “IP Address”

Select “Serial No.”

Enter the QR Code / P2P Code / Serial No. of the device to add. Enter your desired username and password. You may click “Test” to confirm that the device is reachable.

It is recommended to select “Automatically Link Area”. This will create an area based on your device’s name.

The “Online Status” section will say “Online” upon successful connection. 

NVMS 2.0 Mac firewall configuration

There is an option to automatically allow signed software to receive incoming connections. This means the NVMS2.0 apps and services signed by a valid certificate authority will automatically added to this list. Any app that is created by Apple, for example, that needs to receive incoming connections will be automatically added to the list. If NVMS2.0 can not connect to devices successfully, the firewall may be blocking the network access of NVMS 2.0.

Blocking all incoming connections will “prevent incoming incoming connections to nonessential services and apps.” This means that the firewall allows your Mac to find authorized services provided by other computers on your network, but prevents connections to all other sharing services.

Adding NVMS 2.0 services to the OS Firewall whitelist

Click on the Apple icon and select “System Preferences”

Click “Security & Privacy”

Select “Firewall”

Select “Firewall Options”

You may need to click the lock icon to make changes to the setting. You will be prompted to enter your Mac OS credentials.

Select “Firewall options”

You will need to allow connections on the services listed in the snapshot below. Press “OK” to confirm.

Installing NVMS 2.0 Lite (2.1.1) MAC

Default username: admin

Default password: 123456

Download and run the NVMS 2.0 pkg.

https://drive.google.com/drive/u/0/folders/1g2TmrNn7ecJy0LLQPX5tILYZ0S6xWJYk

You might receive a notification that the OS put a hold on the installation.

Click the Apple icon, then “System Preferences”

Click on “Security & Privacy”

Select “General”

Click the lock icon if “Open Anyway” is not selectable.

Click “Open”

Click “Continue”

If you wish to change the install location, you may do so here. Otherwise, click “Install”

Login using your computer’s credentials to continue the Installation.

You will receive a prompt that the install was successful.

You may “Keep” or discard the installation file using “Move to Trash”

To open the NVMS 2.0, open the “Monitor Client.app” in Finder->Applications. 

When you open the program you will be prompted for the username and password. The defaults are admin/123456. Click Login.

You will be prompted to create security questions. This is optional. You may hit “Skip”

Back up footage through NVMS 2.0 (2.1.1)

Playing back using the clip option

To Back up footage using the clipping function, open “Storage Playback” and playback the desired footage.

Once you have found the desired footage:
Click the “Back up start time” button will mark the start of the footage back up. (Scissor icon pointing left)
Click the “Back up end time” button will mark the end of the footage back up. (Scissor icon pointing to the right)
Click the “Download” button will redirect you to Record Management and Download the clip.

When the back up starts you will be able to see the progress and have the ability to cancel the back up using “Stop” or “Pause” to pause the download.

You can use the “Open File Position” to open the folder containing back up footage.
You will also have a progress bar. When the progress bar reaches 100%, the footage download is complete.

Back up using Record Management

Select “Back up” under “Storage Playback”

Expand the area and select your desired channels and date.

Click the “Search” button to populate the Backup timeline.

Click and drag your mouse cursor to mark the desired Playback footage. 
The “Backup” button will begin the download.
You can use the “Zoom In”, “Zoom out”, and “24hr” button to manipulate the timeline.

When the back up starts you will be able to see the progress and have the ability to cancel the back up using “Stop” or “Pause” to pause the download.

When the footage completes, you will be able to click “Open File Position” to locate the back up folder.

Changing the Back up path

Click the “Backup” option from the main menu.

Select “Backup Path”

To change the backup location, select “Browse” next to the “Save Backup Files to” option.
You may also change the “Backup File Format” 
AVI will allow for playback in common video players when the codec is present. The DAT option will use the proprietary file format.
Click Apply to save settings. Note: You will need to close any active Record Management tabs to reflect the updated Backup location.

Disable Password Authentication when Closing NVMS-1000 – Windows

Please make sure you are logged into NVMS-1000 Prior to continuing:

Step 1- Please select “Basic“

Step 2- Under System and Maintenance please select- “Function Customization”

Step 3- Unselect “Check Password When Exit” and Select “OK”

Step 4- You can now close the application without being asked to confirm your Password. Select “OK” to close the application 

LPR Initial Configuration for NVMS 2.1.3

LPR Initial Configuration for NVMS 2.1.3

Preface – This is for the first time configuration of an LPR to NVMS. This will allow the export of plate captures.

Requirements

NVMS V2.1.3

LPR connected to an NVR

NVR connection through AutoNAT

1. Go to Group Management (1) > People & Vehicle Management (1) > Vehicle Registration interface (2) > Click [Add] to add the vehicle information to Allow List or Block List (3).

2. Add a single license plate using 00000 and save.

3. Click the “Task” tab to setting license plate recognition task (1). Select the license plate recognition camera(2) and then click applicable scenario(3). Select “Vehicle deployment control” (4) and click “OK” (5).

4. The LPR Capture and Comparison is now added to NVMS and this will allow exporting of plate captures.

Change NVMS 2.0 language from Chinese to English

By default, the username is admin, and the password is 123456

This port we select skip. 

Click the button that the arrow pointed 

put the check mark on it 

select this one

First, go to the second tab 

and then the arrow point to left is for language select

remember to Apply

Question: 

Change Language / Resolution will reboot the software, do you want to continue?

It’s NO on the left and YES on the right.  

Question: 

It will reboot the software, do you want to save the Live View?

If we select YES, NVMS will save a live view in Chinese title, so we select NO. 

NVMS will get the selected language after restarting. 

Cheat Sheet

Titanium-General-Cheat-Sheet

Answer

.

.

IMS300 is software applications for embedded network CCTV monitoring equipment including NVR,IP Camera, IP Dome, PCNVR , decoding device and AV decoding card, it can support real-time preview, remote configuration, recording,playback, alarm, electric map and etc..

Need only visible display mode:on client component interface elements,joined the need only visible display mode,the calendar,time,the toolbar,the system info,etc,.to join the design pattern.

.

Lowest requirement of client to run IMS300 see below table 1-1:

Table 1-1 lowest configuration

.

.

.

Step one: Double click IMS_300_V1.1.2 Trial.exe to install this program;

Step two: Complete the installation following the guide, click【Next】, see “Figure 2-1”:

.

Figure 2-1

.

    .

Qcam SmartClient Player

To download the Qcam SmartClient program and user manual for Windows please click the links below.

Qcam SmartClient Software Download

Qcam SmartClient Software User Manual

Smart Client for PC

Smart Client is deigned to access and control single DVR/NVR. Compared with CMS, it has less function and much easier for user.

AntarVis2.0 program adopts independent setup package, which is easy for setup and contains the various basic functions for demand. It can be generally used for the small-sized project. Since VMS access data directly from device, the connection of one device with several clients has not been recommended for it intensifies tolerance capacity of device.

AntarVis2.0, our Video Management System, is a professional software for central management of the front-end network monitoring devices, including NVR, DVR, IPC, MDI, SDI, etc. It is to mainly fulfill functions such as real-time preview, video playback, E-map, alarm linkage, decoding on the wall, supporting WEB access and mobile phone client access.

The installation package of AntarVis2.0 is an independent executable file, which is easy to set up and contains various fundamental functions you may need. It can be generally used for small-sized projects.

AntarVis2.0 currently supports four protocols including active ZKTeco, ONVIF ,ZKTeco-P and P2P.

II. Program Overview

Setup overview, double click to run setup program to open setup wizard:

Select setup language, then the program automatically recognizes the system language as default option; if other languages required setup, please select from the drop-down list. The initial program supports simplified Chinese and English. If you need other languages, please contact the distributor for translation; click on “OK” to confirm the setup language selected. Take simplified English as an

example:

Click on “Next”, then select the setup path:

2 Antarvis2.0 User Manual

System’s default path is C:\AntarVis_2.0. Users may modify the path as needed. Click on “Next” to continue:

ZKTeco Antarvis VMS User Guide

Read More :

1. NVMS 2 Installation Guide
2. LILIN Client Installation and User Guide
3. FLIR Cloud Client installation and user guideAntarVis2.0, our Video Management System, is a professional software for central management of the front-end network monitoring devices, including NVR, DVR, IPC, MDI, SDI, etc. It is to mainly fulfill functions such as real-time preview, video playback, E-map, alarm linkage, decoding on the wall, supporting WEB access and mobile phone client access.The installation package of AntarVis2.0 is an independent executable file, which is easy to set up and contains various fundamental functions you may need. It can be generally used for small-sized projects.

   AntarVis2.0 currently supports four protocols including active ZKTeco, ONVIF ,ZKTeco-P and P2P.

    

   II. Program Overview

   Setup overview, double click to run setup program to open setup wizard:

   

   Select setup language, then the program automatically recognizes the system language as default option; if other languages required setup, please select from the drop-down list. The initial program supports simplified Chinese and English. If you need other languages, please contact the distributor for translation; click on “OK” to confirm the setup language selected. Take simplified English as an

   example:

   

   Click on “Next”, then select the setup path:

   

   2 Antarvis2.0 User Manual

   System’s default path is C:\AntarVis_2.0. Users may modify the path as needed. Click on “Next” to continue:

   

   Click “Next” to confirm to create desktop shortcut, continue to complete setup (©note: computer already setup antivirus program may pop-up prompt; please select “allow” with no exception for the normal setup start of the program), the program runs as the setup completed, as shown in figure:

   

   AntarVis 2.0

   

   Login

   Forgot password

   Users may manually switch between languages. The initial user name is admin, and the initial password is 123456. Enter the password, click on “Login”; if you have selected “Remember password”, you do not have to enter the password and the program automatically logs in as “Auto login”. The function of automatic login can be canceled in local configuration. When you forget the password, click on “Forgot password” to get a temporary key for the supplier to help you get a temporary password. Below is the main interface of the program:

   Antarvis2.0 User Manual 3

   

   1) Display current user, user rights, current time, consumption of CPU memory and real-time

   network data flow; click on

   

   to log out.

   2) Display real-time alarm messages and event messages; double-click on the alarm message to

   open the preview of the current alarm channel for users to view alarm in real-time manner.

   3)

   The functions in the toolbar

   

   , from left to right, are: clear alarm/event message, close

   sound/open sound.

   4)

   The functions in the toolbar

   

   , from left to right, are: stay window, window max,

   hide window.

   1. Device Management

   1. Add a Device

   Click on “Device management” on the main interface.

   This interface displays relevant information of all devices added to VMS, including device type, protocol type and online and offline status; click on “Add device” at the top right corner, the “add device” interface will then pop up:

   4 Antarvis2.0 User Manual

   

   

   Select a protocol. ZKTeco protocol is an independently developed protocol of our company. Front-end devices should support ZKTeco protocol. ZKTeco’s front-end devices currently used for shipping basically supports this protocol. The ZKTeco-P protocol is the protocol used by PTZ domes.ONVIF protocol is the joint ownership protocol for access to third-party devices that support this protocol.

   Select the protocols as needed, it is to click on “Search” to search for online devices in the LAN. Take ZKTeco protocol as an example:

   Antarvis2.0 User Manual 5

   

   

   ©Note: devices displayed in gray are those devices that have been added to the device list; click on “IP address” to sort them according to the IP address of the devices.

   Select the device to be added, click on the “Select” button, as shown below:

   

   Device Name: define by the user as needed.

   User Name: user name of the device.

   Password: password of the device.

   Enter correct user name and password to add the corresponding device into the device list. Also, the front end using the ZKTeco protocol does not require a password. (©Note: for safety consideration,

   6 Antarvis2.0 User Manual

   Devices using the ONVIF protocol,the password can’t be retrieved and the password of the device needs to be manually filled in; no password filled in or wrong password will lead to add log-in failure.) Fast match function means when there are multiple devices with the same username and password, choose fast match, then you just need to input the username and password for one time.

   After adding the equipment, the interface is as shown below:

   

   We can edit and delete devices, call remote configuration and modify channel names here. The remote configuration is only supported by ZKTeco protocol; calling the remote configuration can view or modify related parameters of the front-end device. Modifying the channel name is only supported by ZKTeco protocol; It is quick and convenient to modify channel name of the front-end device .

   Antarvis2.0 User Manual 7

   1. Add a Decoder

   

   □□□

   □□o

   □□a

   Control

   panel

   Device CenterB Decoder Group

   _ »

   Device
   management

   Layout Storage Dec Group

   

   Decoder name Decoder type

   User: admin B ^{CPU: 10%} “■

   . . … Memory: 72%

   Right: administrator ..

   Up. UKd/o

   Time: 2018-12-07 15:42:25 Down’ *|KB/S

   IP address

   

   0 records, 1/1 page

   First Previous Next Last

   Alarm Event	< 4»			-*• B
   Time			Messages
   2018-12-07 15:39:15		The device added failed
   2018-12-07 15:09:58		IP, port, device name and user name could not be empty

   Switch to decoder interface. This interface, which is similar to that to add a device, displays all

   decoders added to the server at present and the online and offline status of the decoders. The added

   decoders can be edited and deleted; in case of adding a new decode, click on the

   Add Decoder

   button in the top right corner:

   

   Click on “Search” to search for all online decoders in the LAN; similarly, the decoder added to the

   8 Antarvis2.0 User Manual

   decoder list will display in gray and can not be added again:

   

   Operation

   □ All/Not all | Search Stop Fast Match Add batchly

   Select a decoder to be added, click on “Select”:

   

   Decoder Name: users may define and modify the name as needed.

   User Name: the default setting is admin.

   Password: the default setting is null.

   When it is completed, click on “Save” to add the decoder to the server; in case you want to add a group of decoders, select multiple decoders on the search interface, fill in the right password, click on “Add batchly” to add multiple devices with one key.

   Antarvis2.0 User Manual 9

   1. Channel Group

   Switch to the page of “Group” in the device management module, as shown in the figure below:

   

   Click on “+” button to add group.

   

   Fill in the group name, click on “Save” to create the group; when it is succeeded, select the device

   channel on the left, then select a group on the right, click on the

   

   button to add the

   relevant channels to the corresponding group; the actual application of grouping will be described

   in the preview module. When adding is completed, the interface will look like below:

   10 Antarvis2.0 User Manual

   ZKT^ AntarVis 2.0		□□□ □□□ □□□ Control panel	_ * Device management	User: admin & CPU: 2% — —’ _. . . . . . . . Memory: 63% Right: administrator Up; Time: 2018-12-07 15:58:14 Down: 2KB/S			X
   Device Center Decoder		Group	Layout Storage Dec Group
   	‘ ■ ft CMS ■< ■ ®NVR_192.168.0.218 ¥ CH1 df CH2 >CH3 ? CH4 * ■•IPC_192.168.0.101 » ■ *»IPC_192.168.0.188				+ * *	s»NVR_192.168.0.218-CH1 «»NVR_192.168.0.218-CH2 ‘ BM2 e»NVR_192.168.0.218-CH3 ®»NVR_192.168.0.218-CH4 e?IPC_192.168.0.188-CH01 «WPC_192.168.0.101-CH01
   						Interval of preview roll 30 ‘ seconds] save
   Alarm Event ■< 4» Time			-H n Messages				IB
   2018-12-0715:57:45		Add channel success!|IPC_192.168.0.188-CH01]
   2018-12-07 15:57:45		Add channel success![IPC_192.168.0.101-CH01]

   Similarly, check the channel in the group and click on

   

   to remove the channel from the

   group.

   1. Layout

   Switch to the page of “Layout” in the device management module, as shown below:

   ZKT^

   AntarVis 2.0

   □□□ □ □□ OOÛ

   Control
   panel

   Device
   management

   User: admin & CPU: 4%

   „ . . .. Memory: 70%

   Right: administrator _Up. _H8|<B;S

   Time: 2018-12-07 15:59:20 Down* 31^3/5

   

   Device Center Decoder Group I Layout Storage Dec Group

   Add Layout

   No.

   Layout Name

   Dwell Times(s)

   Window Count

   Division Type

   Operation

   0 records, 1/1 page

   First Previous Next Last

   Alarm Event	< 4»			n «
   Time			Messages
   2018-12-07 15:57:45		Add channel success! [IPC_192.168.0.188-CH01]
   2018-12-0715:57:45		Add channel success![IPC_192.168.0.101-CH01]

   Click on the button “Add layout”, then the system will pop up this window:

   Antarvis2.0 User Manual 11

   

   Fill in the name of a layout, select the number of split screens as needed. Types of split screen include standard split and wide-screen split, among which, pictures under ordinary split screen and wide-screen are displayed in 16:9 and 1:1, respectively; select the duration of stay from Dwell option. and then drag the channel for layout. Take 6 split screens as an example:

   

   Click on “New” or “Save” to complete layout settings. Then, the saved layout information shall be

   displayed on the right side:

   12 Antarvis2.0 User Manual

   

   Right-click on the existing layout to edit the layout. Applications of the layout function are further elaborated in the preview module.

   1. Storage Server

   Switch to the page of “Storage” in the device management module, as shown below:

   ZKTecü

   AntarVis 2.0

   □□□

   □□O □□□

   Control

   panel

   — *

   Device
   management

   User: admin G» ^{CPU: 8%}

   _. . . . ■ ■ . Memory: 71%

   Right ad_mln_lst_ratar _Up;

   Time: 2018-12-07 16:15:30 Down* 3KB/S

   Device Center Decoder Group

   Layout I Storage Dec Group

   Alarm Event < 4)
   Alarm Time	Alarm Type	Device Serial		Param	Alarm Source	Alarm State H
   2018-12-07 16:14…	Motion detection	0B3F00020BDF00004624	4		NVR_192.168.0.218-CH4	Stop Alarm H
   2018-12-0716:14…	Motion detection	0B810002ADBF0000BA47	1		IPC_192.168.0.101-CH01	Stop Alarm SB

   This page displays relevant information of the storage server, including the server name, server

   Antarvis2.0 User Manual 13

   address and used space of the hard disk drive. Click on

   

   to set a storage server, as

   shown in the figure below:

   

   Right-click on the blank area of the RecPlan on the left side, then add a channel to the storage server;

   when it is done, select the channel to set the RecPlan.

   

   14 Antarvis2.0 User Manual

   

   

   RecPlan has a default whole-day template and a working day template. In case of the need of other RecPlan templates, click on “User Template” to add those you need; start to record as the RecPlan set. Yellow arrow in the figure shows the recording status of the channel. Red means the channel is working; blue means the otherwise.

   Antarvis2.0 User Manual 15

   There are four kinds of recording modes, including timing & alarm recording, timing recording, alarm recording and stop recording, among which, timing & alarm recording refers to the timing plus alarm recording, i.e. timing recording runs if no alarm recording has been triggered, while alarm recording runs as an alarm has been triggered; timing recording refers to only time stamps you set; alarm recording means record starts when an alarm is triggered; and stop recording means do not record at all.

4. Pre-record and time delay function are only available in two modes: timing & alarm recording and alarm recording, particularly the alarm recording; copy to channel refers to copy the RecPlan of certain channel to other channel that already added to the storage server; advanced setting can set up different partitions of disk for recording while some others do not; the default setting is that other disks can be used for recording besides the system disk. Click on “Save” to make the settings effective as the configuration completed.

   In case the channel added to the storage server shall be modified, right-click on the channel added to add a channel, delete single channel and delete all channels; click on “Save” when the configuration completed and recording starts.

   1. Decoding Group

   Switch to the “Dec Group” interface in the device management module, as shown below:

   

   16 Antarvis2.0 User Manual

   The operation configuration method of this group is similar to the preview group mentioned above, except that this group is used for intra-group patrol on the decoder. For details, please refer to the introduction of the decoding management module in the following section.

   2. Preview

   Click “Preview” on the main interface to enter the preview module:

   

   As shown in the figure, the device list is on the left side, displaying all devices added currently and the online and offline status of device. PTZ control interface and video parameter control interface are on the right side. Below the video parameter control interface is the split screen switch button, with which, user may manually switch the number of split screens according to the actual demand.

5. Split screen modes include standard split and wide-screen split, corresponding to different window scales. The differences between them have been elaborated in the layout module, thus no further introduction now. Besides the regular kinds of split screens, there are several special-shaped splits for customers to select corresponding numbers as needed.

   Double-click on the device list on the left side or drag the channel to the window opens the preview window of the device channel. Opened channels video will play on the corresponding panels.

   Antarvis2.0 User Manual 17

   

   ©Note: the green triangle on the left-top of the picture above shows that this channel is in preview; the buttons yellow arrows point to shows the local recording status of channels. White □ shows that this channel is turned off.

   As for local recording, blue

   

   indicates that local recording is turned on in this channel and

   is working. Right-click on the channel to turn local recording on or off.

   1. Device/Right-Click Function of Channel
   2. Open all stream

   Open devices’ stream with one key. You may open stream of a maximum of 64 channels each time.

   1. Close all preview

   Close all previews that the current device has activated with one key.

   1. Open record

   Open local recording of this channel.

   1. Open intercom

   Open intercom of PC and the device.

   18 Antarvis2.0 User Manual

   1. Preview Window Toolbar

   On Preview panels, there is a row of shortcuts above the preview window as indicated in the figure:

   

   1)

   

   represents the channel intercom switch; click on it to enable or disable intercom of PC and

   thischannel.

   1. □ represents the device recording switch; click on it to enable or disable local recording of this channel; blue icon □ indicates that the feature is activated, while white icon □ indicates

   that the feature is not activated.

   1. LU represents the capture button; click on it to take a snapshot of the current display of this

   channel.

   1. represents the audio preview switch; click on it to turn the audio on or off. indicates it is off; indicates it is on.
   2. 0 represents the button to quit preview; click on it to close the current preview of this channel.

   Antarvis2.0 User Manual 19

   1. Preview Function Button

   There is a toolbar

   

   on the lower right side of the preview interface, among which:

   represents the capture button; select a preview window, then click on this button to take a

   snapshot of the display;

   represents the full-screen button, click on it to switch between the selected window and the

   full-screen mode;

   represents the on/off button for UTC function; click to enable the UTC function. Please note

   that this feature requires a front-end equipment to operate;

   4)

   3D

   represents the on/off button for 3D positioning; click to enable the 3D positioning function.

   Please note that this feature requires a front-end equipment and 18H protocol to operate;

   to close all preview windows opened at present.

   □ All □ Rule □ Result

   B^^B^^^B^^^^Hcheck boxes are for Intelligent detection, intelligent detection supported
   by front-end devices includes NVR and IPC. When it is used, the setup intelligent rule will be

   displayed in the preview screen. If a target triggers the intelligent alarm, the target triggering the

   alarm will be displayed in the preview screen.

   1. Device Grouping Patrol

   To add two or more groups. For details, please see ”Group“ for specific operation under the section

   Device Management”. When a group is created, you may switch to the group page on the preview

   interface, as shown in the figure below:

   20 Antarvis2.0 User Manual

   

   Right-click on the selected group to operate “Start Patrol” and “Stop Patrol” functions. Time intervals between patrols can be set up in the local configuration module, which will be illustrated below. The default interval is 30 seconds.

   1. Device Layout Patrol

   To add two or more layouts. For details, please refer to the paragraph “Layout” under the section “Device Management”. When a layout is created, you may switch to the layout page on the preview interface, as shown in the figure below:

   Antarvis2.0 User Manual 21

   

   Right-click on the selected layout to open the preview of this layout with one key. Select “Start Patrol” to start the patrol function among several layouts. The interval between patrols can be set up when the layout is set up. Click on “Stop all” to stops the patrol function or close the current preview.

   1. PTZ
   2. PTZ Control

   Users may adjust rotation of the camera in 8 directions, including up, down, left, right, upper left,

   lower left, upper right and lower right. “Zoom” means that users may zoom in or out and adjust the

   visual angle; “Focus” helps adjust the focal length of the camera to ensure the clearness of the

   picture; the enlargement and narrowing of the aperture ensures the brightness and depth of field of

   the picture; the setting of the PTZ control speed can adjust the rotation speed of the speed dome

   camera. Click on “AUTO”, the speed dome camera automatically starts scanning. Please see the

   following figure:

   

   22 Antarvis2.0 User Manual

   1. Preset, Cruise and Track

   Preset: ² 0 ^{Z X|}

   Cruise: 5 ^T ✓ X|

   Trade 3 ▼ -») ✓ XI

   1) Preset: the rotation of the PTZ camera requires the setting of the direction of the preset. Click

   on

   

   to set up the preset. A maximum of 255 presets can be set up. To adjust the presets,

   2)

   select the preset to be adjusted, click on

   

   to call or click on

   Cruise: as the preset settings are done, click on

   

   maximum of 255 cruise paths can be set; click on

   

   to call or click on

   

   to delete the preset.

   to edit and set the cruise path. A

   

   to delete the

   selected cruise path.

   3)

   Track: click on

   

   to edit and set the track; click on

   

   to call or click on

   

   to delete

   the track set.

   • 1. Picture Parameters

   As the preview opened, parameters of the pictures can be adjusted; the adjustment here will not affect the front-end parameters of IPC but the display effect of the picture in the client-end. Please

   see the following figure:

   

   Users may adjust the relevant parameters, namely brightness and contrast, as needed.

   • 1. Preview Digital Zoom

   As the preview interface opened, select a corresponding window and then scroll the mouse wheel to adjust digital zoom-in and zoom-out of the current picture.

   Antarvis2.0 User Manual 23

   • 1. Preview Multi-screen Display

   You may access multiple modules in the preview module. Each of them is independent. If the user’s monitor supports multi-screen mode output, you may use the multi-screen display feature. Considering the actual situation, the maximum preview module to be opened can be restricted to 5. For instance, when you have opened two preview modules, you may drag one of them out with the same operations as dragging the module to another monitoring screen, as shown below:

   

   The monitoring screen on the left is the primary screen; while that on the right is the complementary screen. The operations of preview between two screens doesn’t influence each other; closing the complementary screen will not affect the primary screen, however, the complementary screen will be closed if the primary screen is closed.

6. Users may select the number of preview screens to be opened as needed. For instance, one screen can be selected to open Cruise and display independently in one monitor, meanwhile, another screen can carry out the operations of temporary preview, monitoring and intercom.

   24 Antarvis2.0 User Manual

   1. Video Playback

   Click on the “Playback” button on the main interface to enter the video playback module:

   

   AntarVis 2.0

   

   Preview

   

   □□□ □□□ ooo

   Control
   panel

   User: admin B

   Right: administrator

   Time: 2018-12-08 10:40:15

   CPU: 19%

   Memory: 69%

   Up: 11 KB/S

   Down: 794KB/S

   Device Localhost ^Storage

   ^J ■ ■ Local_Storager

   • <¥NVR_192.168.0.2
   • <>NVR_192.168.0.2
   • ^NVR_192.168.0.2
   • <TNVR_192.168.0.2
   • e»IPC_192.168.0.1S

   

   Alarm Event | < 4»			B W
   Time		Messages
   2018-12-08 10:13:26	Recording Plan Save Success
   2018-12-08 10:13:19	Recording Plan Save Success

   • 1. Video Search

   Select a device channel where the video to be played from the device tree on the left. Please note that only videos in the same device or same storage server can be played simultaneously, and at most 9 channels can be selected each time.

7. Select the storage path of the video on the left, select the stream type of the video to be played in the column of “stream type”, and select the date on the calendar, click on “video search”, then the system will starts to search for the relevant video(s) and display the search results on the search result panel.
8. Video path includes “device”, “local” and “storage”, among which, the device video refers to the video stored in the hard disk or the SD card of the front-end device, local video refers to the video stored in the PC of the client server and the storage video refers to the video stores in the storage server.
9. The stream type includes main stream and sub stream. When a customer opens dual stream in the course of recording, relevant videos can be searched for as needed. The search result will be shown as below:

   Antarvis2.0 User Manual 25

   

   • 1. Video Playback

   Click on

   

   on the interface to start playing or pause; click on

   

   to stop playing. Place the

   cursor on the video bar and scroll the mouse wheel to enlarge or reduce the scale of the video

   bar. Double-click on the video bar to play, and double-click in the timeline of playback to switch the

   time stamps for playback, as shown in the figure below:

   

   26 Antarvis2.0 User Manual

   During playback in several channels, select certain windows, double left-click to switch the window into full screen; place the mouse on certain window, scroll the mouse wheel to operate digital enlargement of this window.

   • 1. Video File Download

   Click on the

   

   button on the interface to enter the download interface of the video file, as shown

   below:

   

   Select the video location(including device videos and storage server videos), channel, range of recording time file save path in proper order, click on the “Start” button to start downloading. When the progress reaches 100%, download is completed.

   • 1. Toolbar Overview

   Among the functional buttons

   

   on the interface,

   

   represents frame play; click on the button to play the selected video frame by frame, and one

   frame will be played for each click.

   

   represents audio switch, which can turn on/ off the audio

   of playback.

   

   represents play speed adjustment buttons, with which, users may

   Antarvis2.0 User Manual 27

   n

   adjust the play speed between 1/16X and 16X.

   represents the capture button; click on this

   button to take a snapshot during playback.

   

   represents the full-screen button; click to switch to

   full-screen (right-click to exit the full-screen mode).

   

   represents window-split buttons;

   users may manually switch the display to single screen, 4 screens and 9 screens as needed.

   

   represents the starting time and ending time; As for certain play

   point, select the starting or ending time to add a sign on the video bar. When the starting or ending time is selected, click on “Download” to rapidly download the video between the two tags to facilitate further operations.

   1. Map Configuration

   Click on “Map configuration” on the main interface to enter the map configuration module, as shown below:

   

   • 1. Add a Map

   Right-click on the signed place in the figure, select “Add map”, pop up the window:

   28 Antarvis2.0 User Manual

   

   Fill in the name, select a picture, click on “OK” to add a map, then several maps is added; meanwhile, sub-map can be added under the map has been added, as shown in figure:

   

   The map opened will be indicated in yellow for differentiation:

   

   • 1. Right-Click on Map Tree
   1. Add map: add a new map.
   2. Delete map: delete the selected map.
   3. Add child map: add a child map under the current map list. You may add several or multi-level

   Antarvis2.0 User Manual 29

   sub-maps for each map. When a sub-map is added, drag the sub-map to the main map to

   complete association and the sub-map shall be displayed in the main map as the icon

   Double-click on the icon in the main map to switch to the corresponding sub-map; and click on

   the

   

   button in the sub-map to return to the main map.

   • 1. Map Deployment

   Drag the device channel or alarm input from the lower-left to the map, then the deployment will be completed:

   

   ©Note: as the channel has been dragged to the map, the position shall be adjusted by dragging it again; right-click on the deployed channel to select or delete an icon (bullet/ dome/ PTZ). Place the cursor on the map, scroll the mouse wheel to zoom in/out the map. The channel deployed to the map shall not be dragged repeatedly. Place the mouse on the deployed channel to view the channel information.

   1. Map Management

   Click on the “Map” button on the main interface to enter the map management module as shown

   30 Antarvis2.0 User Manual

   below:

   

   Double-click on the map to view the map configured and deployed channel. The relevant configuration and modification cannot be executed on the map. Right-click on the channel deployed on the map to allow preview and playback of the corresponding channel. Users, in the actual applications, may swiftly call the preview and playback of the corresponding channel according to the map, which makes the operation clearer and easier. When an alarm is triggered and the associated channel is deployed on the map, the channel icon on the map will turn into red.

   1. Decoder Configuration

   Click on the “Decoder configuration” button on the main interface to enter the decoder configuration module:

   Antarvis2.0 User Manual 31

   

   The module shows the TV wall scheme currently set and the enabled status of the scheme. In terms of the existing TV wall scheme, you may operate “modify”, “delete” and “disable/enable”. Click on “Add TV wall” button in the top right corner to add new TV wall schemes, as shown in the figure below:

   

   32 Antarvis2.0 User Manual

   1. Layout Setting

   Set a TV wall layout, fill in the relevant information here:

   

   1. Matrix layout setting: user cab set the matrix layout as actually needed, maximally support 8×8 layout; when a layout is selected, click on “Set” to make the changes effective.
   2. Fill in the name of TV wall scheme; users may customize the name of the TV wall scheme as needed (©Note: the name will not be modified as defined).
   3. TV wall scheme description: users may describe the scheme for differentiation, optional.
   4. TV wall splice: users may set the TV wall as splice mode or non-splice mode.

   As completed, click on “Next step”.

   1. Screen Input Binding

   Drag the decoder added to the layout set, as shown below:

   Antarvis2.0 User Manual 33

   

   On this interface, users may set the layout and associate the decoder to the TV wall matrix layout according to different situations. To complete settings, click on “Finish”.

   

   

   □□□ □□□ DOO

   Control
   panel

   Decoder
   configuration

   User: admin G»

   Right: administrator

   Time: 2018-12-08 11:10:10

   CPU: 11% İJ.E3.

   Memory: 65%

   Up: 13KB/S

   Down: 522KB/S

   

   2018-12-08 10:50:18

   Channels should be in the same device

   Messages

   Channels should be less than9

   After finishing the settings, the saved TV wall will be seen on the decoder configuration interface and can be edited, deleted and disabled/enabled.

   If the configuration shall be enabled as the setting completed, select “Enable this configuration immediately”, then click on the “Finish” button below. If you do not want to enable the setting, directly click on “Finish” to exit. As the setting is completed, this configuration scheme will be displayed in the decoder configuration list.

   34 Antarvis2.0 User Manual

   1. Decoder Management

   Click on the “Decoder” button on the main interface to enter the decoder management module, as shown below:

   User: admin G»

   Hııjlıt Admin

   CPU: 53%

   Memory: 40%

   rime: 2018-08-31 10:51:46

   ^NVR_192.168.130.188-CH
   «T NVR_192.168.130.188-Ch
   e»NVR 192,188.130,188-CH

   Firstly, drop-down the check box in the signed place of the figure to select TV wall. All rules set and enabled will be shown in this box. Select a scheme.

   • 1. Decoding Mode Selection

   When you have selected a scheme, please set the decoding mode of the decoder to ensure normal decoding. The decoding mode is relevant to the decoder and varies according to different decoders, and the decoding mode is the expression of the decoding capability of the decoder. Click on

   the button in the figure, as shown below:

   

   Antarvis2.0 User Manual 35

   

   Decoding mode represents the current decoding capability of the decoder, which is listed in the figure and supports 3 decoding modes, i.e. 16 channels 720 x576, 9 channels 1280 x960 and 4 channels 2048 x1536.

10. Please note that the subsequent number represents the maximum resolution of decoding, for example, under the 9-channel mode, the maximum resolution of decoding is 1280×960; the decoding mode of different decoders varies as well. It shall be normally decoded and displayed as the resolution of the front-end IPC has been guaranteed not to exceed the resolution restriction of the current decoder mode.
    • 1. Decoding on the wall

    When you have selected a scheme, select the channel for decoding on the wall in the device list on

    the left, then drag the relevant decoder to the corresponding decoding screen to complete decoding

    on the wall. Use the

    

    button to change the stream type of decoding on the wall before

    dragging. Select main stream or sub-stream on the wall.

    ZKTm is — :::

    AntarVis 2.0 Control Decoder Device Mgmt I Decoder

    Panel Config

    

    If the channel dragged to the channel of the decoding screen shall be changed to other channels, the other channels shall be directly dragged to the corresponding window.

    36 Antarvis2.0 User Manual

    

    1) İDİ is used to open the decoding module preview window. Click on it to access a preview

    window on the current page, which is convenient for customers to view pictures on the wall.

    2) H is used to delete the current channel. Click on it to delete the decoding channel of the

    current split screen.

    7.2.1 Decoding group Patrol

    The decoding management group has been mentioned in the device management module discussed above. After setting up the decoding group, users may drag the group to the TV wall in the

    decoding group module, as follows:

    

    The group dragged to the TV wall output can automatically open the patrol within group. The patrol interval can be set at the time of configuring the decoding group. The default value is 2 seconds.

    Antarvis2.0 User Manual 37

    

    • • 1. Decoding Pre-plan Patrol

    Click on the “ADD” button to add a pre-plan:

    

    Set a “Plan Name” and “Stay Time” for the pre-plan patrol. The default value of “Stay Time” is 15 seconds; the minimum value is 10 seconds. After completion of settings, please click on “OK” to enter the pre-plan edit mode:

    

    Configure the Pre-plan. Select the decoder split screen, decoding stream type and channel to edit the pre-plan settings. When you have completed settings, please click on “Save Pre-plan” to complete the editing.

    Click on “Pre-plan” to make this group of Pre-plan to TV Wall directly with no necessary manual

    38 Antarvis2.0 User Manual

    operation, which is much convenient for users. Users may delete the saved pre-plans and perform other operations. If you have set several pre-plans, click “Start Pre-plan Patrol” to allow the decoder to start cruise according to the configured pre-plan.

    • 1. Decoding rolling

    In case of Decoding rolling to be fulfilled in certain decoder, the decoder must be selected for Cruise during TV wall scheme setting (please see section 6.2), and the roll group has been determined in the course of scheme setting.

    As the roll group and roll screen has been assured to be set in the scheme, on the button below in the interface to start/pause the Cruise , click the o button in the process of roll to stop roll (note: roll control button is only effective to roll decoder but general decoder).

    • 1. Introduction of Buttons on Preview Operation Interface

    On the preview operation interface, there is a row of function buttons

    

    

    are split-screen switch control buttons. When a user selects the decoding screen, he/she may use the

    buttons here to switch the number of split screens between different modes, such as 1,4, 9, 16, 36,

    64. is a full screen control; users may click on it to activate full screen mode, right-click to exit.

    

    is a split control; users may open/close the decoder split.

    

    is a channel-clear-control; iib

    is used to clear all decoding channels in certain decoders with one key, while

    

    is used to clear all

    decoding channels in all decoders with one key.

    • 1. Decoder Playback

    Access the playback operation interface as shown below:

    Antarvis2.0 User Manual 39

    

    Drag the channel to be played to the decoder, then select the criteria for searching, such as date and video path. Click on the “video retrieval” button to search for video files in the corresponding

    channel. Operation here is similar to that of video playback. All playback channels must be in the

    same device, and a maximum of 9 channels of playbacks simultaneously. When the video search is

    completed, click on the

    

    button or double-click on timeline to start playing. Double-click to

    relocate time stamp during playing, as shown in the figure:

    40 Antarvis2.0 User Manual

    

    • 1. Introduction of Buttons on Playback Operation Interface

    The function buttons in the lower part of playback operation interface are

    

    For details about the

    functions of the buttons, please see the section above. Its functions includes: play/pause, stop, frame

    play, playback speed adjustment, full screen, split -screen number button, decoder CLS, splict offset settings, open/close the split, TV wall CLS.

    1. Alarm Configuration

    Click on the “Alarm configuration” button on the main interface to access the alarm configuration interface. “Alarm configuration” is an alarm rule setting module. If a user wants to fulfill alarm linkage in the client-end, the alarm linkage rule must be set in advance.

    Antarvis2.0 User Manual 41

    ZKTebo AntarVis 2.0	□□□ □□□ OOO Control panel	Alarm configuration			User: admin & Right: administrator Time: 2018-12-08 11:30:29	CPU: 13% – Memory: 69% Up: 13KB/S Down: 586KB/S
    Add Device Refresh
    Rule Name	Alarm Type	Alarm Source	Remarks	Enable	Description

    Alarm | Event I < 4> ■** a «

    Time		Messages
    2018-12-08 11:29:25	Select channels
    2018-12-08 11:28:54	Select channels

    Alarm configuration interface shows the currently set linkage rules and the state of the rule.

    • 1. Add Linkage Rule

    To add an alarm linkage rule, please click on “Add” at the upper left corner, as shown below:

    

    42 Antarvis2.0 User Manual

    1. Rule name: alarm linkage rule name is user-defined.
    2. Alarm type: currently support 8 types of alarm, including Alarm in, Motion detection, Tampering, Video Loss, Area alarm, Object alarm, Cross line alarm and Counting alarm. Among which, the last four kinds are specialized to the device about intelligent detection. Regarding the definitions of the 8 types of alarm, please see NVR’s specifications.
    3. Alarm source: Click on the check box to add all channels of all devices to VMS which can currently be selected.
    4. Linkage action: includes capture, PTZ, Map, Record, pop Image and TV wall, which are defined respectively as below.

    Capture: captures the picture of the linkage channel.

    PTZ: controls the linkage channel. You may choose to call certain presets, call certain cruises or certain tracks. Only front devices which support PTZ control can be linked to PTZ.

    Map: displays an alarm on map interface. For the linkage of map alarm, the channel to be linked shall be deployed on the map. When an alarm is triggered, the icon of the channel will be indicated in red on the map.

    Record: when an alarm is triggered, the channel linked starts recording at local storage server, where you shall configure the RecPlan in advance. Records can be viewed by searching in the playback module.

    Pop image: when an alarm is triggered, the preview window will pop up from the main interface displaying the real-time preview of the linked channel.

    TV Wall: select a channel and TV Wall for wall-run. When an alarm is triggered, the real-time preview picture of this channel will be uploaded to the TV Wall.

    Note: If the linkage action has been set as map, video, popup image and TV Wall, the front-end devices shall be selected. It shall be “auto-end” or “Schedule end”; “auto end” means that there is no linkage action upon the completion of alarm, while “timing end” means that the linkage action will end at the set time, which ranges from 1 second to 36,000 seconds.

    1. Action param: the linkage action set can be displayed in this column.
    2. Remarks: indicates relevant information of this linkage rule. It can be customized and omitted.

    Upon completion, the window is as shown below:

    Antarvis2.0 User Manual 43

    

    Click on the “Save” button at the bottom to save and complete the settings.

    • 1. Modify Alarm Rule

    

    Upon completion of alarm rule adding, users may click on “Modify” indicated in the figure to edit the existing rule.

    • 1. Delete Alarm Rule

    Add Device Refresh

    Rule Name Alarm Type Alarm Source

    1 Alarm In DEVICES-NVR_192.168.0.88-NetAI…

    Remarks

    Enable

    □

    

    Modify Update

    To delete the existing rule, click on the “Delete” button in the figure; in case of disable of the feature at the moment, select the “check” button in the figure.

    44 Antarvis2.0 User Manual

    1. Alarm Management

    Click on the “Alarm” button on the main interface to enter the alarm management interface:

    

    Alarm management interface displays all alarm information upload to VMS. Select time range to search and an alarm type, click on the “Search” button, then the system will search for relevant alarm information. There are 8 types of alarms, including alarm input, motion detection, video tampering alarm, video loss, target count detection, area detection, object detection and line crossing detection.

    1. Log Management

    Click on the “Log” button on the main interface to enter the log management interface:

    Antarvis2.0 User Manual 45

    User: admin G» CPU: 5%

    _x Memory: 77%

    Right: administrator _{Up: 1IKBS}

    Time: 2018-12-08 11:53:43 Doyun* 682KR/^<S

    

    

    Log management interface displays all important operation records of a user. Select a log type and time range to search, click on “Retrieve” to start searching. Log types include login/logout, device management, start/stop rec, linkage management and remote configuration.

    1. login/logout: users log in/out records.
    2. Device management: management of records about user registration, modification and deletion of devices.
    3. Start/stop recording: start/stop local video record.
    4. Linkage management: management about recordsfromf user operations, such as addition, modification and deletion of a linkage rule.
    5. Remote configuration: records of user operations in terms of remote configuration, and modification of parameters for front-end devices.

    The log will record the operation time, the user performed such operations, IP address where the operation is conducted, types of operations and target address of relevant important operations in details, which help the administrator to find out any issues.

    46 Antarvis2.0 User Manual

    

    1. User Management

    Click on the “User management” button on the main interface to enter the user management interface:

    ZKTe^ AntarVis 2.0	□□□ □□□ □□a Control panel	X * Users management		User: admin G» Right: administrator Time: 2018-12-0811:58:40	CPU: 4% SI! Memory: 75% Up: 14KB/S Down: 615KB/S
    Add user
    	Username		User type		Operation
    	admin		administrator	Modify	Update Right

    Alarm Event	< 4»			-•* B
    Time			Messages
    2018-12-08 11:47:08		Select an alarm source
    2018-12-08 11:46:41		Fill in rule name

    User admin listed in the user management interface has the rights to set privilege for sub-users and users. There is a default super user whose name is “admin”, which can not be deleted and has all privileges. Click on “Modify” to change the password of the super user.

    • 1. Add Sub-user

    Click on “Add user” at the left-upper corner to add a new user:

    

    The default user type is “Guest”, which means an ordinary user, not an administrative user. The user

    Antarvis2.0 User Manual 47

    type cannot be modified. Fill in the user name, password, type the password again, then click on “OK’ to add a new user. The password and that to input at the field “Confirm password” shall be the same.

    • 1. Sub-user Access Distribution

    Add user

    User name	User type			Operation	Righ^
    admin	Administrator	Modify	II	Delete
    test	Guest	Modify	II	Delete	Right

    To assign sub-users access rights, click on the “Right” button indicated in the figure to grant the users relevant access privileges:

    

    Types of access include common access, map access and decoder access.

    Common access: includes preview, playback, video, intercom and PTZ control; depends on channels. The administrator may distribute relevant channels to the corresponding sub-users. The number corresponding to PTZ represents the control priority of PTZ. You may double-click to edit, and select a value from 0 to 10, among which, 0 indicates that there will be no PTZ control access, and 1-10 indicates the priority of PTZ control access. The larger the number, the higher the authority, i.e. 10

    48 Antarvis2.0 User Manual

    represents the top priority of PTZ control while 1 represents the lowest priority.

    Channels without preview access distributed will be hidden if a sub-user logs in. Similarly, channels without relevant access rights cannot offer users access to playback, video and intercom. users can’t apply the corresponding functions. For instance, there are only 3 channels have been distributed to test sub-user, as shown in the figure:

    

    Login with sub-user can only view three channels, as shown in the figure below:

    

    ©Note: the super user has top access priority which cannot be modified.

    Antarvis2.0 User Manual 49

    • 1. Sub-user Modification and Deletion

    

    1) Modify a sub-user

    Click on the “Modify” button indicated in the figure to pop up the editing interface.

    Edit – X

    

    OK

    Users may modify their passwords as needed. Upon completion of input, click on the “OK” button to confirm and save.

    1. Delete a sub-user

    Click on the “Delete” button on the user management interface to delete corresponding users, among which, you may not delete the super user account.

    50 Antarvis2.0 User Manual

    1. Local Configuration

    Click on the “Local configuration” button on the main interface to enter the local configuration

    interface:

    ZKTeco	□□a □□a OOO	o
    AntarVis 2.0	Control	Local
    	panel	configuration

    User admin & ^{CPU: 13%}

    . … * Memory: 74%

    Right: administrator ..

    Up: 11 KB/S

    Time: 2018-12-08 12:11:49 _Down: 625KB/S

    □ Autologin □ Bootfrom the start

    0 Auto stream O Speed mode ® Save mode 4 ■» sub screen open the main stream

    Window scale

    Capture path

    Download path

    Export log path

    FullScreen

    C:\Capture

    C:\Download

    C:\Logs

    Browse Open

    Browse Open

    Browse Open

    Sync device time I Set Time □ Auto time Sync time 00:00 * Interval 1 ’ Day

    Alarm sounds f Set

    Rec storage path settings | Set

    Data backup and restore Backup Restore

    Channel count

    ZKTeco: unlimited Channel

    ONVIF: unlimited Channel; P2P: unlimited Channel; ZKTeco-P:unlimited Chai

    Record colors ScheduleMotion detect

    Smart

    Version V2.0[20181123]

    Save

    Alarm Event < -♦* n s

    Alarm Time	Alarm Type	Device Serial		Param	Alarm Source	Alarm State
    2018-12-08 12:10…	Motion detection	0B9301230911945AE75A	2		NVR._192.168.0.88-CH2	Stop Alarm
    2018-12-08 12:10…	Motion detection	0B810002ADBF0000BA47	1		IPC_192.168.0.101-CH01	Stop Alarm

    1. Auto login: when VMS software opens, it will automatically log in.
    2. Boot from the start: when you select this feature, the client-end program will run automatically when the server which runs VMS boot up.
    3. Auto stream: when speed mode and save mode are selected, as shown in the figure,

    □ Auto stream 0 Speed mode 0 Save mode 4 ’ sub screen open the main stream

    among which,

    open of preview will open main stream and sub stream under the speed mode, however, only one of them will be displayed, therefor, it will be faster for switching and also saves the bandwidth. “Save” mode means that only one stream shall be opened at the same time; the current stream shall be closed to open another. It is slower and saves the bandwidth as well.

11. Users may select the mode as needed. In addition, it can be selected under certain number of split screens to automatically switch to main stream under the circumstance of auto stream, 1,4 and 9 channels are optional.

    Antarvis2.0 User Manual 51

    1. Window scale: for preview or playback. You may choose from full screen, 4:3 and 16:9.
    2. Capture path: the directory to save captured pictures, including preview captures, playback captures and alarm linkage captures.
    3. Download path: the directory to down documents.
    4. Export log path: the directory to export log documents.
    5. Sync device time: manual or automatic synchronization of time of access devices.
    6. Alarm sounds: selection of sound, which is used as alarm linkage sound. You may customize the sound.
    7. Rec storage path setting: setting local directory to save recorded documents.
    8. Data backup and restore: backing up and restoring database to prevent data loss.
    9. Channel count: displaying the authorized total number of channels. ZKTeco: unlimited Channel;

    ONVIF: unlimited Channel; P2P: unlimited Channel; ZKTeco-P: unlimited Channel

    1. Record colors: defining the color of indication of different types of videos.
    2. Version: the version number of the current program (non-modifiable).

    Upon completion of settings, click on “Save” to quit.

    52 Antarvis2.0 User Manual