App Download

Simply download the Vichome app from the Apple Store (iOS devices) or Google Play (Android devices) and have full control over all security products. This means that you can monitor your home or property whenever you like.

As a powerful helper, our app will help you stay connected to your home or business when you’re not there and help keep you safe when you are.

NOTES🚩: Vicohome APP is a mobile application and we currently do not provide PC version or iPad version of the APP.

We greatly appreciate your support and welcome to stay tuned for more.

LongPlus Camera Setup Guide

🔎DOWNLOAD  TODAY📲

【OR】Press and hold this QR code to automatically identify and install

How to properly install the security camera?

🟠 When installing security cameras, LongPlus always recommends placing cameras up high. The outdoor installation location should be 7ft away from the ground. Here are the best places to install security cameras around your home: front & back doors, garage & driveway, yard, common areas, main stairway or hallway, or any side doors or large first-floor windows that an intruder could gain access through.

🟠 Typically, home cameras are placed in the corners of the room to optimize the viewing angle. LongPlus recommends at least two cameras to fully cover a large space, such as a living room. To fully monitor your home, users can add cameras in each room to achieve a complete home monitoring system.

🟠 Battery cameras can not be installed behind a window/glass if you want to use the “Motion Detection” feature.

Battery cameras use PIR (passive infrared) motion detection, an energy-efficient (saving battery power) technology that captures motions by detecting infrared radiation (radiant heat) emitted or reflected by objects. When the camera is mounted behind a window/glass, infrared radiation does not pass through the window/glass. As a result, the “Motion Detection feature” does not work reliably. If you want the camera to detect motions outside, it is recommended that you mount the camera outside.

For plug-in/wired cameras, the answer is yes, as they use camera video analytics rather than PIR sensors to detect motions. As long as they “see”, they can detect motions. So you can mount the camera behind a window/glass with confidence.

How to find the serial number of LongPlus security camera?

🟠 Each LongPlus security camera has a serial number. These are usually located on the body label of the security camera, starting with S/N:*****. Also, if you’ve added your camera to the app, you can also tap the camera “setting” icon > tap the “>” extension icon > tap the “More info” button to find the camera’s serial number.

Is LongPlus security camera waterproof?

🟠 Yes. The waterproof rating of LongPlus camera is IP65. It can be “protected against water jets from any angle”. Generally, the camera can be used outdoors on ordinary rainy and snowy days. However, it may get damaged in extreme weather. But if the camera is installed under the roof or in a place with some shelter, it can get protection to a certain extent. Besides, please don’t expose the camera’s charging port, power button, and microSD card slot to water.

What do the indicator lights on LongPlus security camera mean?

🔵 Solid Blue Light – The camera is working properly.

🟡 Solid Yellow Light – The camera is charging.

🟢 Solid Green Light – The camera charging is complete.

⚪ No Light – The camera is in sleep/off mode.

Can I talk to someone via LongPlus App?

🟠 Yes, LongPlus security camera features two-way audio capability, which means you can listen and talk to someone in real-time with simple clicks in the App.

Do LongPlus security cameras need an app to work?

🟠 Yes! All LongPlus smart security cameras are connected to the LongPlus APP. Compatible and compatible with the latest versions of iOS/Android devices. Installing LongPlus app is a breeze and it comes with voice prompts to guide you step-by-step in minutes.

What is the default language of LongPlus security cameras?

🟠 The default language of LongPlus security camera is set during production and testing in the factory production process. After connecting with LongPlus APP, the language of the camera will follow the language of the APP.

Can I see the infrared light at night?

🟠 No, the night vision infrared light is invisible to human eyes. If you turn on your phone’s camera and point it at the camera lens, then you will be able to see it.

How to format a Micro SD card?

🟠 Sometimes after inserting a Micro SD card, the camera will report “Please use the app to format your SD card first”, that’s because your Micro SD card is not the FAT32 format that the camera supports. In this case, please tap the camera Setting icon > tap SD card > tap Format to format it.

How to record/save videos on a Micro SD card?

🟠 Installing a Micro SD card does not mean the camera will record a video to the Micro SD card all the time.

When the camera detects a movement, it will record a video to the cloud and the cloud recording will display in the Library in the app. If apart from the cloud recordings you want to save backup videos on a Micro SD card at the same time, you can insert a Micro SD card into the camera.

🟠 Here are tips:

1. Find the Micro SD card slot and insert your Micro SD card: Mostly, the Micro SD card slot is next to the power button and is under the rubber plug of the camera body. However, for some models of cameras, you may need to take off the outer shell of the camera to find the Micro SD card slot.

2. If the Micro SD card is detected, you will hear “SD card detected” at the time when it is inserted, and you can see both the storage of the Micro SD card and “SD Card Video” in the app.

Please note that the camera only supports legitimate brand-name (SanDisk, Samsung, Kingston) Micro SD cards, but may not be able to support no-brand, fake, expansion (the storage is extended), and read-only (you aren’t able to put a file to it) Micro SD cards.

How to view videos on the Micro SD card?

You can view videos on the Micro SD card from the app or on your computer.

To view videos on the Micro SD card from the app, please tap the camera “setting” icon on the app homepage > tap “SD card video” on the “Camera Setting” page > select the date on the top > swipe the screen left and right until the green vertical line overlaps the grey “bubble”( If there is no grey “bubble”, that means there are no motions detected in that period).

If you want to zoom in on the specific time before playing a video, you can swipe two fingers left and right at the same time or tap the “magnifying glass” icon.

How to activate cloud storage?

🟠 The cloud storage we gift you is automatically activated and contains free 3 days rolling cloud storage. You can view the cloud-stored videos in the last 7 days at any time.

When the SD card is full will it overwrite the older files?

🟠 Yes, when the SD card is full, the camera will delete the earlier recorded video so you don’t need to format the SD card manually.

Can the camera be used without a memory card?

🟠 Without a memory card, the recorded video will be automatically saved in the cloud, you can watch the video for nearly 7 days in the cloud.

How long does it take to charge LongPlus camera once?

🟠 It will take about 8 -15 hours to fully charge the camera once. When the security camera is fully charged, the indicator light will turn solid green.

Why can’t the battery be charged?

🟠 The following factors may cause charge failure. Please check them one by one:

(1) The charging device is not suitable, or it malfunctions. Please make sure the power adapter and charging cable are in good condition. The power adapter specification is “5V/1.5A”.

(2) The charging port is defective. Possible causes include: the Micro USB cable and the charger or the charging port of the camera are not plugged in properly; there are objects in the charger or the charging port of the camera.

(3) Please confirm whether there are objects in the camera’s charging port or the charger port and clean it before charging.
Please ensure that the Micro USB cable is in good contact with the ports on both ends of the charger and camera.

(4) You can try to connect the Micro USB cable and the charger to other devices (such as mobile phones or computers) to see if they work normally. If anyone doesn’t work, please change to a new one to try again.

(5) The long-time operation leads to charge port oxidation or internal looseness. Please repair or replace the charge port immediately.
The charging cable is damaged or broken. Please replace the Micro USB cable that can work normally.

(6) The charging cable should not be too long. The required cable length is generally not more than 16 feet (5 m). Please replace the Micro USB cable with a suitable length.

(7) The charging environment is not suitable; excessively high or low temperature makes charging impossible. Please move to a place with an appropriate temperature environment (0°C ~ 45°C) for charging.

If the above are ruled out but the issue still persists, please submit feedback from the app for further technical assistance.

Why can’t the battery be used for a long time?

🟠 The battery life mainly depends on the total working duration of the camera. The following factors may lead to fast battery consumption. Please check them one by one:

1. Users frequently view live streams/The camera is frequently activated to record videos.
In order to make the camera work longer, please avoid turning on the live broadcast for a long time.

2. Poor Wi-Fi connection to the camera
If the camera’s Wi-Fi connection is bad or unstable, it will continue to actively search for networks, so the battery will drain quickly.
Please try to place the camera near the Wi-Fi router. Thick walls, bricks, ceramics, electromagnetic equipment, large amounts of liquid, and large metal objects can interfere with Wi-Fi signals. Please try to avoid these objects.

3. Extremely cold weather shortens battery life
The operating temperature of the camera is -10°~45 °C. Please do not place the camera in an extremely cold environment.

4. Night Sight will consume more battery power
When you enable Night Sight, the camera will enter night mode when the light is darker than the threshold (sensitivity level). Camera performance is improved when it is dark.
Therefore, for sharp nighttime images, we don’t recommend disabling it, although it may drain more battery power. But if you still want to disable it, you can tap the camera “Settings” icon > tap “Lighting Settings” > close “Night Sight”.

How can I extend the battery life?

🟠 The battery life is largely determined by the number of recordings and the number and duration of live. Here are the suggestions to extend the battery life:

(1) To reduce false triggers. Change the location or angle of the camera. Please allow us to explain how motion detection works: when the PIR sensor perceives a change in the environment, motion detection will be triggered. The change in the environment can be a moving object, light change, the alternation of hot and cold air, etc. Particularly common false triggers include trees shaking after being blown by the wind, the cold air of the air conditioning, etc.

(2) Set motion detection sensitivity to Low or Medium. After doing that, the distance the PIR sensor can detect will become shorter so that false triggers may be reduced.

(3) Shorten the recording duration of the camera. Currently, the camera-supported recording durations are 10 seconds, 15 seconds, 20 seconds, and automatic (up to 3 minutes). For your reference:

(4) Set Sleep mode. This feature allows you to schedule the working hours for the camera. Whether the camera enters sleep mode on schedule, or you enable Sleep, the camera will be deactivated. Under this condition, the live feed will not be accessed, motion detection (including push notifications, recordings, and camera alarm) will stop working. This can reduce power consumption to save battery life.

(5) If possible, you can try to watch live feeds or adjust camera settings on your mobile phones less frequently.

(6) To avoid or reduce the battery consumption caused by poor network connection. You can place the camera as close to the router as possible, and try to avoid thick walls, bricks, ceramics, electromagnetic wave equipment, a large amount of liquid, and large metal objects.

(7) We suggest that the camera be installed in a suitable temperature environment (14°F~113°F).

(8) It is generally not recommended that you turn off night vision, but if you do not need to monitor at night (watch live and video), you can turn off night vision.

If the issue persists, please submit feedback from the app for further technical assistance.

Will Wi-Fi environment affect the camera battery?

🟠 Yes, an unstable or poor network environment will cause the camera to transmit data multiple times, the camera keeps actively searching for the network, or even reconnect to Wi-Fi continuously, which will result in faster battery consumption. Multi-layer concrete walls, brick walls, and overcrowded Wi-Fi channels will cause a bad Wi-Fi environment.

To save the camera’s battery life, please ensure that the network connection is strong.

How to charge the camera?

🟠 Connect the Micro USB cable to a 5V/1.5A power adapter.

🟠 Connect the other end of the USB cable to the camera.

🟠 Plug the power adapter into an electrical outlet.

🟠 Use the solar panel to charge.

Battery cameras can be used after being fully charged

O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.

If you can’t find the QR code or can’t scan the QR code, please select Wireless camera.

3. Make sure your O-KAM Pro camera is ready to connect, the camera light is flashing or you hear the prompt “Please use the app for Wi-Fi configuration”.

Note: If the light is not blinking or there is no prompt tone, please reset the camera.

Then click ‘I heard the prompt tone or see the indicator light flashing’, go to the next step.

4. Enter your wifi password, then click Next.

Please choose 2.4G wifi, some O-KAM Pro cameras only support 2.4G wifi.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

5. Make sure your wifi is 2.4g and the wifi password is correct, then click Confirm. Give the displayed QR code to the camera to scan.

Place the QR code about 15-30 Inch in front of the camera to scan, and complete the scan after hearing the “beep” sound.

After the connection is successful, it will automatically jump to the next step.

After successful connection, you can test the wifi signal strength, or later in the test, please put the O-KAM Pro camera in the location with strong wifi signal.

The app will prompt you to subscribe, it is recommended to cancel, if you need cloud storage, make sure the O-KAM Pro camera can work properly before subscribing.

AP Mode Connecting O-KAM Pro Camera

If the QR code connection fails or the QR code cannot be scanned, you can try to connect the O-KAM Pro camera using AP mode.

1. Go to your mobile phone’s wifi list to connect to the hotspot wifi of the O-KAM Pro camera, return to the O-KAM Pro APP after the connection is successful, and then the app will auto add the camera.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

2. Go to Settings, select Device Settings, and then click Wi-Fi network.

3. Select your wifi, then enter your wifi password, click Confirm and wait for O-KAM Pro camera to connect to your wifi.

Share O-KAM Pro Camera

Once you have connected the O-KAM Pro camera, if you want your family or friends to use the camera as well, you need to share the camera with your friends via the Share function.

1. Go to the Share screen, then send the QR code to your friend.

Permission Settings:

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

2. Have the invitee download the O-KAM Pro APP and register and login, then click + scan the QR code to add a camera.

Connecting O-KAM Pro Camera without a router

If you want to use O-KAM Pro camera without internet or router, you can connect to the included hotspot wifi to use the camera.

This mode only supports close range use.

1. Go to your mobile phone’s wifi list to connect to the camera’s hotspot wifi, after connecting, return to O-KAM Pro, the app will auto add the camera, then you can start to use it.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

Function setup – Wired O-KAM Pro Cameras

The functions of different types of O-KAM Pro cameras differ slightly, so please check your camera type.

If your camcorder needs to be connected to the power supply at all times to work, then it is a wired O-KAM Pro camcorder type, please check the function setting instructions below.

Recording Setup – Wired O-KAM Pro Cameras

O-KAM Pro camera supports cloud storage and memory card recording, cloud storage requires subscription, the following memory card recording settings.

You need to insert the memory card to record, the recording will be saved in the memory card, after inserting the memory card, the camera will sound a voice prompt.

The default is to start 24 hours recording, you can change the recording mode in TF Record Settings.

O-KAM Pro camera supports the following recording modes:

If the memory card shows abnormality, please try to format the memory card and reboot the camcorder.

View Recordings – Wired O-KAM Pro Cameras

In the live video interface, click TF Card in the lower right corner to view the video saved in the memory card.

Motion Detection Setup

Activate the Motion Detection function in the Monitoring Function, O-KAM Pro cameras support Motion Detection and Human Detection.

Motion Detection

When the camera detects an object moving, it will send an alarm notification to your mobile phone.

This mode may have a high false alarm rate, if you need to detect only suspicious people, we recommend you to choose Human Detection.

Human Detection

The camera will send alarm notifications to your mobile phone only when it detects humanoid objects.

Activity Zone Setup

Setting the detection area allows the camera to detect a specific location, reducing the chance of false alarms.

Smear the area you don’t need.

Detection schedule

Customize the schedule of Motion detection, reduce false alarms. The camera automatically monitors for you during the scheduled time.

Alarm flashing light

After the alarm flashing light is turned on, the camera will automatically flash when motion detection is triggered.

Camera Siren

When Alarm sound switch is turned on, the camera will emit alarm sound when motion detection is triggered, you can choose alarm sound or record your own sound.

Enter Notification Settings, select Camera Siren and then turn on the Alarm sound switch.

Email notification

An email will be sent to you when a motion is detected.

Click Add an email , then enter the email address you want to receive alarm notification and finish the setting.

Auto Tracking

When Person tracking is activated, the camera will Auto Track people’s movements and monitor all activities. It will automatically switch to and focus on the person when they enter the camera’s field of vision.

This feature is only supported by O-KAM Pro cameras that support PTZ.

Human frame

People are automatically framed in the live video Help you filter out motions of other objects and quickly follow the person’s movement.

Night vision setup

O-KAM Pro camera defaults to black and white night vision mode, you can change the night vision mode in Device Settings, Night Vision.

Only cameras with dual light sources support this feature.

Reset O-KAM Pro Camera

Press and hold the O-KAM Pro camera reset button for 5 seconds to reset the camera.

.

O-KAM Pro Camera FAQ and Troubleshooting

You can find here how to fix O-KAM Pro camera can’t connect to wifi, offline and not working problems.

.

Why is my O-KAM Pro Camera offline?

O-KAM Pro camera is offline, it means the camera can’t connect to the network properly, please follow the steps below to fix the offline problem:

Is the router working properly?
Connect your mobile phone to the router Wi-Fi, switch off the mobile data, can you access the internet normally? If it is not normal, try to restart the router.

Whether the WiF strength is full or not
Put the mobile phone to the camera installation location, detect whether the Wi-Fi signal is full? If the signal is weak, it is recommended to adjust the distance from the router to the camera.

Whether the O-KAM Pro camera is normal
If a memory card is inserted into the O-KAM Pro camera, power off the camera and remove the memory card, then check if the camera works properly.

Replace the power supply with another one.

If none of the above solves the offline problem, try resetting the camera and reconnecting it.

Why does O-KAM Pro camera keep showing that it is connecting?

.

See also  How To Setup O-KAM Pro camera(Complete Manual)

.

You can also try:

If it’s a 4G O-KAM Pro camera, please detect if the SIM card’s is in arrears.

.

The app’s home screen allows you to see all your cameras’ latest activity at a glance, so you can quickly identify any potential security threats. The events gallery allows you to view all your cameras’ events at once or individually, making it easy to track activity over time.

With quick access to live streaming, you can now monitor your property in real-time, giving you peace of mind when you’re away. The app also provides important information on each camera’s status, allowing you to better manage and maintain your cameras.

The VOSKER® Sense AI Tools ensures that you receive notifications that matter to you. With advanced motion detection, you can customize alerts to receive notifications on your phone only when a person or vehicle is detected. This feature also reduces false notifications, so you’re not constantly bombarded with unnecessary alerts.

VOSKER cameras use 4G-LTE cellular network and are not compatible with Wi-Fi. To activate your camera with the supplied SIM card, you’ll need a VOSKER data plan, and you’ll need one plan for every camera on your account.

Take your surveillance efforts to the next level. Download the VOSKER mobile app today and experience the ultimate in remote area monitoring.

ACCESSING YOUR ACCOUNT

Use your login credentials to access your VOSKER account from the web browser. To access your account from your mobile, you will need to download the VOSKER app from Google Play Store (Android) or Apple App Store (iOS). You can modify your personal information or add other cameras to your account from either the web browser or the mobile app. You can also add other users, however, you must share the same email address and password.

HOW CAN I BUY A PLAN?

If you are using an Android phone, you have the option to purchase a plan either from your VOSKER mobile app or from the web browser.

For iOS users, you will need to access your VOSKER account from the web browser to purchase a plan.

VOSKER MOBILE APP :
To purchase a plan from your VOSKER mobile app,

VOSKER WEBAPP :

Once you login to your account, follow the steps below to purchase a plan:

*Remember that you can save up to 10% when you select a yearly plan!

.

VOSKER APP setup and User guide

HOW DO I HAVE ACCESS TO THE FREE PLAN?

V150
V150 comes with a 7-day free trial of our Elite plan that will give you unlimited photos and 40 HD photos for those 7 days. After your trial period is over, you’ll need to purchase a plan in order to keep receiving photos in your VOSKER mobile app. Photos will still be saved to the MicroSD card of your camera.

V200 and V100
You will receive a 30-day free trial of the Elite Plan where you will be receiving unlimited photos and can request up to 40 HD photos. After the first 30 days of activation on the unlimited plan, your camera will automatically transfer to the free plan where you will receive up to 100 photos a month. You can purchase a paid plan any time after the 30-day trial period is over.

HOW CAN I DOWNLOAD HD PICTURES ON MY PHONE?

Users are now able to get HD versions of their most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.
*except for the FREE plan

On the right top corner of each of your pictures you will find an HD icon. Click and your picture will start uploading.

View of the Mobile App:

HOW TO CHOOSE THE RIGHT TRANSMISSION PLAN FOR MY SECURITY CAMERA?

Cellular security cameras are great for monitoring your property remotely. A notification pops on your phone, and you see somebody lurking around the construction site, the farm or the marina.

This system relies on the data plan you will pick and the number of photo alerts included. But how do you know how many alerts you will need? We listed points to consider when buying your data plan.

Photo count

First, consider how many alerts you expect the security camera to send in a month. Since the data plan works off of a monthly allotment, having a rough estimate based on the 7-day free Elite trial is a good place to start.

Location may come into play. The number of photo alerts may vary if you installed the camera in an empty yard or at a busy security gate. How many times will people or vehicles pass in front of it daily? Also, consider other elements moving in front of the camera, like animals, objects, and weather conditions.

Settings

On top of this first estimation, you must factor in your camera settings preferences in the VOSKER app.

How many alerts are you ready to miss?

The camera saves photos on the memory card when you reach the monthly photo alerts. You will no longer receive any alerts in the app until the photo count is reset in the next monthly cycle or unless you upgrade the plan. It all comes down to your tolerance of missing information.

Test it

A great way to evaluate your needs is to get a monthly Elite plan for your newly installed camera. Test the settings to fit your objectives and monitor the photo count. Once the setup is steady, and you get a good idea of the photo alerts, it is time to pick the best plan and frequency.

Remember: you can save 10% off the monthly fee by purchasing the data plan annually.

Flexible

You may use your security camera at different locations or for different purposes within a year, affecting the number of photo alerts you need. Remember, you can upgrade or downgrade a monthly data plan*. It is also possible to suspend its auto-renewal if you need a break.

You now have all the tools to make the best decisions for your surveillance solution.

*Annual plan can only be upgraded with extra charges.

WHAT CAN I DO TO INCREASE MY PHOTO QUALITY?

Understanding the different features and specifications of the VOSKER cameras can help you choose the right camera at different locations on your property that will give you optimal photo quality. If you intend to set up the camera in a place where the objects are moving fast, choose a camera with a faster trigger speed to ensure the camera activates and captures the photo before the object moves out of the frame. Cameras that have a larger motion detection range are a better choice when you want to set up the camera over larger areas.

Here are a few things that you can do to improve the quality of your photos:

.

WHY DOES THE RESOLUTION ON MY PHOTOS SEEM TO BE LOW?

The photos that your camera is sending have been compressed to facilitate the transfer. You will find the best photo quality directly on the SD card inside your camera. You can also get HD versions of your most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.

On the right top corner of each of your pictures, you will find an HD icon. Click and your picture will start uploading. *except for the FREE plan

WHY DO MY PICTURE COLORS LOOK WRONG?

If the color of your photos looks different than normal, E.g., Pink or Black photos, check the following:

CAN’T LOGIN TO MY VOSKER ACCOUNT.

If you are having issues logging in to your account, verify the following:

STEP 1

STEP 2

STEP 3

If following the steps above did not resolve your issue, please contact VOSKER support team for assistance.

HOW TO CHANGE MY CAMERA SETTINGS FROM THE VOSKER APP

To change your settings for your VOSKER camera, navigate to the “Settings” tab. Make sure to choose the correct camera from the dropdown option at the top. You will see 3 sections: Basic, Cellular Setup, and Advanced Options. You can change the settings under these sections according to your preference and select the “Apply Changes” button to save the settings.

Note: Our cameras communicate with our servers based on the frequency set in your settings. For example: If your Transfer Frequency is set to 2 times a day, this means that your camera will communicate with our servers 2 times a day.

VOSKER SENSE

VOSKER SENSE is a tool that uses artificial intelligence and enables you to easily differentiate between a human and a vehicle in a photo. All our plans, except the Free plan, include VOSKER® AI Tools. So, make sure you are on one of our paid plans. To use this feature,

HOW TO DELETE CAMERA FROM ACCOUNT

HOW CAN I SHARE MY PICTURES WITH SEVERAL PEOPLE?

WHAT IS THE RESOLUTION OF THE TRANSMITTED PHOTOS?

V200

V150 and V100

.

I’ve wanted to make this list for a while, and hopefully it will help answer some simple questions or guide newcomers on their IP video quest. Feel free to add, change, or refine this!

 .

Most Popular Camera Manufactures (on this forum):

ACTi (http://www.acti.com) – Midrange camera – good price – free software.

Avtech (http://www.avtech.com.tw) – Has good ‘push’ support for events to mobile devices.

Avigilon (http://www.avigilon.com) – Similar to Axis cost – must buy through dealer – good software/support.

Axis (http://www.axis.com) – Popular choice – higher end cameras get expensive – easy to find online for sale – free + paid software options.

Dahua (http://www.dahuasecurity.com‎) – Re-branded as Q-See – low price – difficult to find updates/support.

Geovision (http://www.geovision.com.tw‎) – Midrange – have some LPR cameras.

Grandstream (http://www.grandstream.com) – Low cost – have some unique features.

Hikvision (http://www.hikvision.com‎) – Becoming more popular – re-branded as Lorex/Swann systems from Costco.

IQinVision (http://www.iqeye.com) Midrange pricing.

Mobotix (http://www.mobotix.com) – Cameras made in Germany – reliable but expensive – no moving parts to fail in their cameras.

Vivotek (http://www.vivotek.com) – Midrange pricing.

 .

Other Camera Manufactures:

Arecont (http://www.arecontvision.com/‎)

Brickcom (http://www.brickcom.com/)

Bosch (http://www.boschsecurity.us/en-us/ProductInformation/Cameras/NetworkCameras/)

Canon (http://www.usa.canon.com/cusa/professional/products/security_video_solutions/network_cameras)

GE (Unknown Website Address)

Honeywell (http://www.honeywellvideo.com/products/cameras/ip/index.html)

JVC (http://pro.jvc.com/prof/attributes/category.jsp?productId=PRO5.2)

Panasonic (http://www.panasonic.com/business/psna/products-surveillance-monitoring/index.aspx)

Pelco (http://www.pelco.com/sites/global/en/home.page)

Samsung (https://www.samsung-security.com/)

Sony (http://pro.sony.com/bbsc/ssr/mkt-security/)

Toshiba (http://www.toshibasecurity.com/)

 .

IR Illuminators:

Raytec (http://www.rayteccctv.com/)

Axton (http://www.axtontech.com/)

Iluminar (http://www.iluminarinc.com/)

+Other Generic Brands

 .

Accessories:

PoE Switch (Unmanaged, or Managed which allows remote powering on/off of specific ports) (TRENDnet, Netgear, D-Link, Cisco, Axis, etc.)

Ethernet Cable (Regular/Burial Grade)

Lenses (C/CS/S/D Mounts)

IR Illuminators (Discussed Above)

Enclosures (Pelco, Videolarm, Axis, Generic Brand, etc.)

PIR Sensor (Optex, Bosch, etc)

UPS Battery Backup System

 .

Popular Places To Buy:

[Redacted – do a search on the forum for general ideas ]

 .

Video Recording Software:

ACTi VMS (Free) – Only supports ACTi Cameras.

Avigilon (Per channel: Core ~$100, Standard ~$200, Enterprise ~$350) – Purchase through authorized dealers.

Axis Camera Companion (Free) – Only supports certain (newer) Axis Cameras. 16 cameras max.

Axis Camera Station (~$90/license)

Axxon Next (Free for 16 channels) (http://www.axxonsoft.com/products/axxon_next/)

BlueIris ($29.95 – $49.95) (http://blueirissoftware.com/) – Supports a large variety of network cameras.

exacqVision ($50 – $150/license + $25 yearly for optional updates)

Genetec (Expensive)

Geovision (Free)

Luxriot ($99 – $1000+)

Milestone XProtect (Free – $1000+)

Mobotix Control Center (Free) – Supports other cameras for viewing. May be able to record with MXServer.

OnSSI (Unknown)

Vitamin D (Free/$49/$199) (http://www.vitamindinc.com/index.php) – PC + Mac Compatible

Zoneminder (Free) – Open source Linux software.

…Etc, Most Manufactures Provide Their Own Software.

 .

Network Video Recorders (NVR’s)/NAS Stations:

Synology (1 License Included – ~$50 /per additional license)

Dahua

QNAP

Luxriot

NUUO

Hikvision

 .

iPhone Viewing Apps:

Netcam Viewer (Free/$5.99) (http://bit.ly/18UfXMs)

Live Cams Pro ($1.99) (http://bit.ly/19RAleQ)

QCamPro ($7.99) (http://bit.ly/14iCWxR)

Official Mobotix (Free) (http://bit.ly/15XNtmo)

IP Cam Viewer Pro ($3.99) (http://bit.ly/10QAwYn)

Dahua iDMSS Lite (Free) (http://bit.ly/110ZjmV)

Dahua iDMSS Plus ($4.99) (http://bit.ly/12FyWpw)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

 .

Android Viewing Apps:

IP Cam Viewer Pro ($3.99) (http://bit.ly/TG6OyB)

Dahua gDMSS Lite (Free) (http://bit.ly/12zjvAs)

Dahua gDMSS Plus ($5.00) (http://bit.ly/12FzfAA)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

The Ultimate IP Camera Guide v3.

Review Sites/Sample Videos:

Network Camera Critic (http://www.networkcameracritic.com/)

Mateusz CCTVnerd (http://www.youtube.com/user/mateuszfen)

Megapixel Cameras – Images and Demos (viewtopic.php?f=19&t=11322)

Plazor (http://www.plazor.com)

Axis YouTube Channel (http://www.youtube.com/user/AxisCommunications)

Avigilon YouTube Channel (http://www.youtube.com/user/Avigilon)

MXInstaller (http://www.mxinstaller.com/)

 .

Companies That Rebrand/Resell:

Swann (Rebrands Hikvision Equipment)

Lorex (Rebrands Hikvision Equipment)

Q-See (Rebrands Dahua Equipment)

Toshiba (Appears To Rebrand Vivotek)

Cisco (Sometimes Rebrands Pelco)

 .

Other Helpful Links:

CCTV Lens Calculator (http://www.jvsg.com/online/#)

Identification And Recognition Guide (http://www.axis.com/academy/identification/index.htm) – Make sure you have the correct resolution for your application.

Security Today – IP Cameras (http://security-today.com/directory/list/ip-video.aspx)

CCTV Frame Rates Comparison (

) – Recordings don’t necessarily have to be 30fps for desired results.

IP Video 101 Training (http://ipvm.com/report/ip_video_training_course_101)

 .

Live Demo Cameras:

Mobotix Cameras (http://www.mobotix.ro/live-ro-p-3.html) or (http://comsurv.com/live-video-cameras/)

Axis Cameras (http://www.axis.com/camerademo/) or (http://ipcameralive.com/)

Mixture (http://camelive.info)

 .

Terminology:

CBR: “Constant bit rate [encoding] means that the rate at which a codec’s output data should be consumed is constant.” (i.e. the amount of data flowing from camera to user/nvr is always constant – even during movement or lack thereof. [See also VBR])

DSD: (http://www.dsdcctv.com/)

DVR: “a consumer electronics device or application software that records video in a digital format to a disk drive, USB flash drive, SD memory card or other local or networked mass storage device.”

Edge Recording: “The concept of taking audio/video from a camera, and storing it at the edge of the Ethernet network instead of transporting it across the network to a centralized recording facility such as a Network Video Recorder.” (Most cameras have this ability now.)

IR/IR Illuminator: LED’s (often a separate device) which provide illumination for cameras in near to total darkness. The light produced cannot be seen by the human eye. The camera must be sensitive to IR for this to be useful (some cameras have ‘fixed’ IR cut filters). ‘White light’ illuminators are also available. These produce light visible to the human eye and to a camera with or without an IR cut filter.

LPR/ANPR/AVI/CPR/LAPI: “A mass surveillance method that uses optical character recognition on images to read vehicle registration plates.”

NAS: Basically a box filled with hard drives for storage of data. Some cameras have the ability to record directly to these networked boxes without the need for an always on or dedicated computer.

NVR: “A software program that records video in a digital format to a disk drive, USB flash drive, SD memory card or other mass storage device.”

ONVIF: “Open Network Video Interface Forum (ONVIF) is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products.”

PIR: Passive Infrared “is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.”

PoE: “A system to safely pass electrical power, along with data, on Ethernet cabling.”

UPS: “uninterruptible power supply…is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.”

VBR: “Variable bit rate files vary the amount of output data per time segment.” (i.e. Less data during still scenes, more data during high movement periods.)

WDR: “‘Wide dynamic range’ describes an attribute of an imaging system which can capture greater scene details from shadows to highlights than normal.”

 .

Commonly Asked Questions:

Q: “Which brand or manufacturer should I buy?”

A: Each brand has its strengths and weakness, whether it be price, size, low light capabilities, resolution, frame rate, support, software, compatibility, etc. There really isn’t one magical brand or camera. Each security scenario is different and requires a unique solution.

 .

Q: “Where can I buy an IP HD PTZ Outdoor Camera for $200?”

A: Probably not going to happen. PTZ cameras are expensive because of all the motors, belts, gears, and such. Perhaps instead consider using several fixed multi-megapixel HD cameras instead for coverage.

 .

Q: “How do I embed/add video from a camera to a website?”

A: See: http://www.networkcameracritic.com/?p=1290 or http://bit.ly/10rC8WV

 .

Q: “How do I view my cameras on my TV/Monitor?

A: Consider using an Android powered HDMI dongle. These mini computers are powerful and compact enough to be attached to a TV or monitor for camera viewing using an Android app. Also see: http://www.networkcameracritic.com/?p=1049

 .

Q: “Should I buy a Foscam?”

A: These cameras are not typically discussed here because of their poor reliability and feature set. They are often cloned and copied making firmware updates and support hard to come by. So in short, probably not. However if you are just starting with IP cameras, many members have since upgraded from these over time to bigger and better.

 .

Q: “How do I view my camera(s) from the internet?”

A: You need to setup your router for port forwarding. Here are several guides to assist you. See: http://www.networkcameracritic.com/?p=124 or http://bit.ly/184DTvf

 .

Q: “What shutter speed should I use during low light/night?”

A: “Typically 1/30 of a second is as low as you would want to have it set. Any longer and moving objects will be blurry making the footage less then useful.

 .

Q: “Should I use a wireless camera for my application?”

A: Wifi signals, especially at long distances, can drop or become unreliable. They also become targets of hacking “resulting in free access to your personal cameras (EXTREMLY DANGEROUS) or blocked cameras, ones that will not record anything.” It is best to use a hardwired connection via cable for installations. PoE installation can supply signal and power over one cable for easy installation. If a cable is not an option consider using a dedicated wifi access point, like the type made by Ubiquiti Networks.

Technical Guide to IP Cameras– Overview, Types, Applications

.

An IP camera (Internet Protocol Camera) is a type of security camera that receives video data and sends video footage via an IP network. It is also known as network camera or IP security camera, often used as remote monitoring and management tools in many sectors and environments to protect the property or monitor home, business, or public security. Connected with other devices such as network video recorders and displays via a network, IP cameras allow you to monitor specific areas from any remote location, bringing much convenience to our daily lives.

How Does An IP Camera Work?

IP cameras work the same way as digital cameras to capture high-quality images. What sets them apart is the capability of IP cameras to compress those files and automatically transmit them to a network video recorder (NVR) via a network. Usually, IP cameras are connected to the network via ethernet cable with a broadband modem or router, or wirelessly via a Wi-Fi router.

In a building that has already been equipped with a network, all you have to do is to connect the IP surveillance cameras and other devices into your network system, just the same way that you would do when you connect your laptop or cell phone to your Wi-Fi.

After everything is well connected, the cameras can start working, capturing and sending video footage to the network video recorder.

Four Common Types of IP Camera

There are various video surveillance solutions, in which many different types of security cameras are adopted. Among those surveillance cameras, there are four most commonly used ones, dome cameras, bullet cameras, and turret cameras. Knowing more about the differences among dome vs bullet vs turret vs fisheye cameras will help you find out the one that fits you most.

Four Important Specifications of IP Cameras

When looking for a security camera, not only should you decide on the type of it, but also you need to notice that the specifications can make a huge difference. There are four of the most essential specifications.

Resolution

The resolution of IP cameras is the total number of pixels that make up an image, which is usually measured by the width and height of the image. The most common resolutions of security cameras are 720p, 1080p, 5MP, 4K and 8MP. Usually, higher resolutions mean that there are more pixels per inch (PPI), resulting in a high-quality, crisp image.

Field of View

The lens of an IP camera allows you to frame an area that you want to spot. Different lens systems come with different fields of view, which determines how wide an area you can see. A wider field of view will allow the camera to spot a larger area. Typically, for a large parking lot and a small room, you will need lenses with different viewing angles.

Focal Length

The focal length of a lens, which is measured in “mm”, determines the angle of view and how far the camera can see. There are two types of lens, fixed lens and varifocal lens. The most common fixed focal length is 3.6mm, which leads to a 90° view angle and a distance of 20 feet. There is also 8mm lens with a 40° view angle and identification distance of 40 feet. For varifocal lenses, the most common ones are 2.8-12mm lenses.

At 2.8mm you get around 100° view angle, with only around 10-feet identification distance. At 12mm you will achieve around a 30° angle of view and identification at around 50 feet. The wider the focal length, the further away it can focus and the narrower the field of view.

Low Light Sensitivity

Low-light sensitivity, usually measured in Lux(lx), refers to the ability of a camera to provide high-quality images even in low-light conditions by presenting details and reducing noise in the output images. There are few factors contributing to the low light performance of a camera, including pixel size, signal-to-noise ratio, lens aperture, etc. A lower Lux has the ability to present high-quality images in darker areas. For example, cameras with 100-1,000lx are applied to record under work-space light, while cameras with 0.0001lx are usually adopted for moonless nights or overcast nights.

Most Popular IP Camera Applications

Home Use

For those looking for tools to get close with their families, monitor family security or protect family property, IP cameras are always a go-for item. Many homeowners equip their families with a video surveillance system to make themselves and their families feel safer.

The IP cameras installed in home security systems have been used to serve a number of purposes. For example, they can be installed near the front door to capture the image of each one who steps into or sneaks around the house, or installed in the backyard to catch a view of their families’ happy moments, or installed inside the room, to make sure their baby is being well taken care of, etc.

Business Use

Commercial security cameras are often used in business buildings, supermarkets, shops, restaurants, etc. For business owners, security cameras can not only protect their property to ensure normal operations and prevent criminal acts with real-time monitoring, but also can keep them connected with daily operations and employee safety.

Outdoor perimeter security can also be maintained with video surveillance solutions to monitor the surroundings. Compared to traditional systems, commercial IP video surveillance systems offer greater reliability and security with built-in encryption, data compression, network connection, and cybersecurity measures.

Public Safety

Surveillance cameras play an important role in managing public rules, protecting public safety and property. It’s not difficult to find that there are plenty of monitoring cameras along the traffic roads, parking lots and around the governments or hospitals. Moreover, there are lots of public areas deployed with security cameras, including schools, parks, communities, neighborhoods, etc.

Conclusion

IP cameras have become a dispensable part of home, business or public surveillance systems. With the proper video management software, the video recorded by IP cameras can be viewed from anywhere worldwide via the network, whether using a laptop or a mobile phone. In many cases, IP cameras can also be controlled remotely, adding much convenience to our lives.

There are various types of security cameras that are designed for specific applications, and that’s why you need to take several factors into consideration when purchasing IP cameras for your security system. Before the next step, it would be better to figure out your budget and your requirements first.

Guide to Understanding IP Cameras

Welcome to a venture into the captivating digital world of Internet Protocol (IP) cameras. Whether you’re considering investing in this game-changing technology or you’re simply eager to boost your tech acumen, we’ve got your covered. Untangling complex technical jargon and translating it into simple language, this blog post will chart your course through the depths of understanding IP cameras.

What is an IP Camera?

An IP camera , also known as a network camera, is a digital video tool that sends and receives data via the internet. Unlike its analogue predecessor, the CCTV (Closed Circuit TV), it offers the functionality to view live or recorded footage from anywhere, anytime using a web-based platform or mobile application. Think of IP camera as the digital evolution.

Advantages of the IP Camera

.

Understanding IP Camera Operation

Let’s dive deeper into how these fantastic little devices work.

Capturing Images

The essence of an IP security camera is in its lens, sensor, and processor. The lens focuses on the light emanating from the surroundings, which then hits a digital sensor. This sensor transforms the received light into an electronic signal that the processor can turn into a digital video stream.

Sending Images

The key difference between an IP camera and previous systems lies in its ingenious use of the Internet Protocol. Instead of sending unprocessed data to a recorder, IP cameras encode and process the signal on the device before transmitting it to be stored or viewed over the network. This reduces the workload for the recorder, enhancing the system’s efficiency.

.

Most Popular Types of IP Cameras

Not all IP cameras are created equal, of course. Different styles suit different needs. Here’s a quick classification of the most commonly used types:

Bullet Cameras

These are named for their cylindrical shape, resembling a bullet. Bullet cameras are great for monitoring both wide focused areas such as entrances or small rooms.

Dome Cameras

Identified by their dome shape, these cameras provide a wider viewing angle ideal for bigger spaces like living rooms or stores.  Some come with adjustable lenses to hone in on important areas.

PTZ Cameras

PTZ stands for Pan-Tilt-Zoom. A PTZ IP camera provides the functionality to remotely control the movement and zoom of the camera, making it perfect for large, open spaces.

.

IP Camera Installation: Tips and Tricks

Installing an IP camera isn’t rocket science. Here are some friendly tips to ensure you obtain the best surveillance results:

.

Securing Your IP Camera

In an increasingly digital world, security is paramount. Here are a few guidelines to secure your IP camera system:

Change the Default Password

On purchase, devices often come with generic login credentials. It’s essential to change these immediately to a unique and complex password.

Regular Firmware Updates

Stay up-to-date with the latest firmware version provided by the manufacturer. This ensures your device is protected from any known loopholes.

Effective Network Security

Ensure your home or business network security is robust. Use established security measures such as firewalls and secure Wi-Fi protocols.

The captivating world of IP cameras offers the potential for superior surveillance solutions. The charm of hands-on control combined with the convenience of remote access can revolutionize how we approach security. Yet, it is crucial to remember that with great power comes great responsibility. In this digital age, securing our devices should always be a priority. Embrace the technology but don’t forget to keep it secure. Welcome to the future of surveillance.

Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision

The Following network settings must be checked before adding the device to Guarding vision App.

Method 1: From NVR Local menu

Step 1: Right Click on the NVR Monitor and select “Menu”.

Step 2: Select “Configuration” from the Menu options.

Step 3: Select “Network” and check the option “Enable DHCP” Click “Apply”

Step 4: Make sure your NVR/DVR obtained an “IPV4 Address” and “Preferred DNS Server” values automatically. If not, check your network settings and make sure your device is properly connected to your network router or switch.

Step 5: Select “Platform Access” and check “Enable”.  You will be taken to the service terms window.

Step 6: Create a “Verification Code” check the “Guarding Vision service terms” click “OK”.

Step 7: Click “Apply” to apply the settings. The status will change to “Online”. The QR Code being displayed on your device “Platform Access” page can be scanned with Guarding Vision app to add the device into your App. To proceed with adding the device into the app scroll down to “Adding NVR/DVR to Guarding Vision App”.

Method 2: From the NVR/DVR/IP Camera Web page.

Step 1: Input the IP address of the NVR into the address bar and login with the credentials.

Step 2: Go to Configuration  Network  Basic Settings

Adding the NVR/DVR to Guarding Vision App

Method 1: Using the QR Code

Download and install the Guarding vision app on the Mobile. Register and Create a Guarding vision account on the App.

.

.

.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code”. Scan the QR Code displayed on the NVR’s Monitor.
.

.

.

.

.

.

Step 3: Scan the QR code from the device sticker or Login to the device Local Menu and go to Menu  Configuration  Network  Platform Access to access the QR Code.
.

.

.

.

.

.

.

.

Method 2: Add Device with Serial Number
.

(Only the last 9 digits of the serial number are needed to add the device into the App.)
.

Step 1: Tap on the ‘+’ icon and select “Manual Adding”
.

.

.

.

Step 2: The serial number can be accessed from the device sticker. To access the serial number from the web config, go to Configuration  System  System Settings  Basic Information
.

(Refer to the figure below)
.

Step 3: Once the “Manual Adding” Option is selected, You will be directed to the Add device page with “Serial No.” Input the serial number and click on  to save.

.

.

.

Step 4: Click “Add” to add the Device.
.

.

.

.

.

Step 5: Input the Verification Code that was created and click “OK”.
.

(You can find the code from the device web Config. Go to Configuration  Network  Advanced settings  Platform Access.)
.

.

Step 6: Tap on “Next”. Create a Device name in the “Edit Alias” page. Tap “Save”
.

.

.

.

.

.

Step 7: Tap on “Guarding Vision” at the bottom of the app to see your device listed. Tap on the device name to view the cameras connected to the device.
.

.

.

.

.

.

How to Change Camera names on the App
.

• Slide the device name to the left to view the settings and share icons.

• Tap on the  Settings icon.

• Tap on “Linked Camera”

.

• Click on the Edit icon and input a desired name to the camera and Tap “Save” icon.

• 

Guarding vision Setup from browser (www guardingvision com)

.

Step 1: Open browser (Internet explorer/Chrome) and input the address www.guardingvision.com. And click on “Register” to register for a new account.

Step 2: In the registration page, input the mandatory credentials and select “Email” for registering with email or “Country Code” for registering by a phone number.

Step 3: Once the account is created, select “Device Management” and select “Add” to add a new device.

Step 4: In the “Add Device” pop-up window, input the device serial number (Last 9 digits of the serial number found on the device sticker) and click on “Search”.

Step 5: If the platform access is enabled on the device, then you should see the device on the “Add device” window. Click on the ‘+’ icon for the device. Click on the link for Enabling “Platform Access” https://app.box.com/s/ftj2keo6pvvvkpif9ukquyp7jrvhktwx.

Step 6: Enter the verification code found on the platform access page of the device. Click “Add”.

.

Step 7: Click “OK”. Now the device should be added into the Guarding vision account. To view video stream, download the Guarding vision ass on your mobile phone and login with the account credentials just created.

.

.

Sharing the device:

To share the device with another Guarding vision account, click on the “Share” icon next to the device name

Select “Email” for sharing by email or select “Mobile Phone Number” to share by mobile number. Click on the check mark next to the device and click “Share”.

.

Initialize/Setup SD Card from Guarding Vision App

SD Card Setup for IP Camera from Guarding Vision

.

Purpose:

This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.

(Note: When a brand new SD Card is inserted into a IP Camera, it has to be initialized/formatted before it can start recording data)

.

Steps to Initialize/Format the SD card

Step 1: Open the app, Select ‘Guarding Vision’ on the bottom left and slide the device name to the left and select the icon.

Step 2: Once in the device settings page select ‘Storage Status’

.

.

.

.

Step 3: In the storage status page, select ‘Memory Card’, which will take you to the ‘Initialize Storage’ page.

.

.

.

.

Step 4: In the initialize storage page, select Initialize. This will format or initialize the sd card and the sd card should be ready for recording.

.

Reset device with Guarding Vision

Reset NVR using Guarding Vision

Purpose:

The purpose of this document is to be able to reset an NVR with the vuarding vision account.

Currently Supported HINO devices:

NVR532P16-I4

NVR516P16-I4

NVR732-I8

NVR764-I8

Required Firmware:

V4.1.65 or above

Initial setup for enabling Password reset from Guarding Vision

Step 1: During the initial device setup, make sure the “Reserved Email Settings” option is checked.

.

.

.

Step 2: Since the Reserved email settings option is enabled, the following screen as shown in the figure below should appear. Input the email that you wish to receive a password reset verification code.

(Note: Please enter a valid email)

.

.

.

Resetting password from the Guarding Vision App

Step 1: On the NVR login screen, click on “Forgot Password”

Step 2: On the following screen as shown in figure below, select “Verify by Reserved Email” and click “OK”

Step 3: You will be brought to a screen with QR Code.

.

.

Step 4: Open the Guarding vision App on your phone and go to More  Reset Device Password.

.

.

.

Step 5: Scan the QR Code shown on the NVR screen. You should see a message as shown in the figure below.

Step 6: Check your email to find the verification code and enter the code in the field provided and click on “OK”.

.

Platform Access for Guarding Vision Offilne Issue

Guarding Vision Offline Issue

Purpose:

This document provides steps to fix the Platform Access “Offline” status issue on your NVR/DVR.

Solution:

The most common cause for “Offline” status is when the “Preferred DNS Server” space is empty. Follow the steps below to fix this issue.

NVR Local menu

Step 1: On the monitor connected to the NVR, Right click and go to Menu  Configuration  Network  General

Step 2: Enter the “Preferred DNS server” address as 8.8.8.8

(Note: If “Enable DHCP” is checked, you can check the option “Enable DNS DHCP” which will let the NVR/DVR pullup its own Preferred DNS Server)

Step 3: Click “Apply”. The device might take a few seconds before applying the new values.

Step 4: Now go to Menu  Configuration  Network  Platform Access. The status should show “Online”. The device might take up to 60 sec before showing the new status. Click “Back” wait 60 sec and check the status again.

(Note: You can scan the QR code on your “Platform Access” page to add the device directly to your Guarding Vision App.)

.

Guarding Vision Quick Setup

Guarding Vision Setup Instructions

Setting up the DVR/NVR

Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network.

Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If you have “Enable DHCP” and “Enable DNS DHCP” option on this page selected, then you do not have to perform this step)

Step 3: Select “Platform Access” and check “Enable” and create a verification code. Click “Apply”.

.

(Note: The QR code displayed on the platform access page can be used to add the device into the guarding vision app.)

Adding the device on Guarding Vision App.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code” to scan the QR code being displayed on the NVR monitor. Input the Verification Code that was created under “Platform Access” in the NVR.

.

.

.

.

Step 3: For Manual Adding, input the “Serial No”. For QR code, Scan the QR code from the device sticker or the QR code displayed on the NVR. (Note: You can also scan the QR Code you see on the monitor. Refer to Step 3)

.

Guarding vision sharing and registering

Guarding Vision ‘Register’ ‘Login’ and ‘Share’

Registering on Guarding vision

.

Option 1: Tap on the “register” option. Now in the Register page enter the Mobile Phone number and tap on “Get Security Code”. You will receive a code by “Text”. Input the code you just received and complete the process.

Option 2: Tap on “Register by Email Address” for registering by email. You will receive the security code to the email address entered.

.

How to select Login options on Guarding vision

.

To Login using a mobile number, tap on the “Login by Mobile Phone Number” option. Now input the phone number and password and tap “Login”.

.

.

.

.

Sharing a device on Guarding vision

​

Method 1: Sharing from the Primary account

On the Primary account, swipe the device name to the left to access the “Share” Icon. Tap on the Share icon. This will take you to the “Recipient” page.

In the “Recipient” page enter the email or phone number of the user you want to share the device.

When sharing, make sure the Phone number/email/username are entered as shown in the account details.

Finding Account Details:

On the bottom of the app, Tap on “More” and select “Account Management” to view the Account details like Username, Email address(if used to register) and Mobile Phone Number (If used to register).

.

.

.

Add Stand alone device to Guarding Vision

.

Adding a Stand Alone IP Camera to Guarding Vision App

Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access

Step 2: Check the “Enable Option” you will see a pop-up window asking to create a verification code. Enter the desired verification code and click “OK”

Step 3: You can view the verification code by clicking on the eye lid icon.

Step 4: Click “Save” and refresh the page. The status should turn from offline to online.

.

Step 5: Now you can add the device into guarding vision by entering the las 9 digits of the serial number which can be viewed by going in to

Configuration  System  System Settings.

.

Step 6: Open the guarding vision app on your mobile device and register for a new account.

Step 7: Click on the ‘+’ sign on the top right corner of the app and select manual add for serial number or QR code to scan the QR code on the device sticker

(Note: Playback can be viewed on the App for IP Cameras that support Micro SD Card)

.

Add Device with Static IP into Guarding Vision for Local Access

.

Add IP Camera to Guarding Vision with Static IP Address

Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App.

Note:

Method 1: Adding an online device in the local network

Step 1: Open Guarding vision App and select “Guarding Vision” on the bottom of the App. Click on the “+” icon on the top right to access adding menu.

Step 2: From the Add menu, select “Online Device”

.

.

.

.

Step 3: In the online device list, tap the device you want to add. You will be taken to a details page.

Step 4: The details page shows you the info of the device that you just selected.

(Note: Select the “Add Device to Guarding Vision Server” option available under the “Add” button for remote access over cloud. For this, the device should be connected to the network and  the “Platform Access” option should be enabled from the local menu/web menu for NVR/DVR. For a IP Camera, the “Platform Access” should be enabled from the web menu.)

.

.

.

.

Step 4: in the “Add Device” page, input the Username and Password for the device and click  on  icon on the top right corner to save the login credentials and finish adding the device.

The device should be added to your App.

.

.

.

.

.

Method 2: Manual Adding option

(Note: Using this method, you can add a portforwarded device with a public IP address.)

Step1: Open the App and click on the “+” icon on the top right to access the add menu. Select “Manual Adding”.

Step 2: Select “IP/Domain” to change the adding type.

.

Step 3: Create a name for the device by typing in the “Alias” option.

• Input the “IP address” of the device and the login Credentials. Tap on  icon on the top right to save the values entered.

(Note: If you have a device with a port forwarded IP address, you can enter that public IP address in the address space with the device login credentials.)

.

.

It means you can check out who is on your door before opening it while at your own home. You only need to check the video clip camera to see who your visitor is. 

So it will be easy to distance yourself from unwanted visitors and save your property more securely. Stay with us to get more information about these useful and popular cameras.  

What is a Tplink Tapo camera?

If you need something more than a traditional camera, choose the Tp-link Tapo camera. These security cameras will show you high-resolution videos with crystal-clear images. You can even get notifications while you are far from home because the Tapo camera will inform you whenever it detects some motions on your doorstep. 

You won’t miss anything by installing these new and innovative security cameras. Also, it is possible to make an honest communication with your visit while you are not home. Let’s use the Tapo camera to experience the convenience of life and peace of mind.

You will need a digital and electronic security option to protect your property in the digital world. Since burglars and intruders are improving, you must promote your security system too. Tp-link cameras can protect your home and office during the day and night.   

Generally, if you are looking for a camera to make your property more secure and modern, tapo cameras are the best choice. Inside its box, you will find an extraordinary camera. You may expect the camera to be heavy but lighter than expected. 

The lenses of this camera are lovely, and every customer is satisfied with its resolution or quality. Notice the Tapo camera has no power button because it is a plug-and-play smart device. 

There is also a rotating base where the camera can move 360 degrees. You can see the speaker for your audio, where you can communicate with each other. We mean the manufacturer designed the Tapo camera wisely and smoothly. 

Based on customers’ and users’ ideas or opinions, the Tapo camera is a good product in the UK market. If you rotate the camera upwards, you will notice 2 components. The first is for the reset button, which lets you reset the camera by default.

The second one is the micro SD slot. This is where you insert your SD card to save the recordings. Overall, people and users give this product a 5 score from 1 to 5. How about you? Is it what you need the most for your property and controlling process?  

Read More : How to Set Up SuperLive Plus

How can you install a Tplink Tapo camera?

As the Tplink Tapo camera is an electronic and digital device, you will need special expert knowledge to install it. Therefore you have to use the help of some mechanical experts to install this security option. 

It won’t be easy to install an electronic device on your own so ask some expert to help you. In case of incorrect installation, your Tapo camera won’t be able to show all its unique features and services. You need to spend some money on the installation of the Tplink Camera. 

Don’t worry; it won’t be too expensive, and it won’t take long to install a Tapo camera. There are well-experienced experts and knowledgeable men in the security system market, who use their help easily and quickly. Also, you can read tp link powerline setup here. 

The configuring step is one of the most critical phases of the installation process. Remember, there is a quick guide inside the box of the Tapo camera, so use it for the complete configuration process and details. It is helpful to check out the settings for configuring afterward.

What do we need to set up the TP-link Tapo camera? 

TP-link Tapo camera is one of the most secure and practical security cameras available in the UK. TP-link Tapo is an outdoor security WiFi camera that is easy, simple, and secure to set up. 

You will need a router, camera, and phone to set up a TP link Tapo camera. Don’t forget to download the Tapo app from the Apple App Store or Google Play. You must log in with your TP-Link ID in the following step. 

If you do not have a TP link ID, you must sign up at the beginning. There are 2 critical things for your camera setup: 

Installing the camera bracket is one of the essential steps to perform. The camera can easily face the wall. You can have the cable on any side; it will be your choice. Setting up the TP-link tapo is so easy. Also, you can remove it quickly.

This camera’s assembling process depends on where you want to install the camera. After installing the camera, insert 2 screws and hold the camera at the bracket.

There is a cover for the MicroSD slot and the reset button. You can remove the surface, white silicon rubber, around the sealing slot and need the Micro SD. You also have to consider the maximum gigabyte.  

Wall mounting instructions

It can be helpful to know about wall mounting instructions. We are going to explain the most critical steps in the wall mounting process:

This process can be helpful to mount your TP-link Tapo on the ceiling. It is crucial to know that you must install a camera base on the wall first. Do not install the camera directly into your camera.

Installation of the waterproof cable attachment

Besides all the mentioned processes, you must install the waterproof cable attachments for the network interface just after installing the outdoor camera. Remember to make sure that all parts are attached wholly and securely.

The good news is that there are proofing rings which flush and keep out the water. It is essential to install a waterproof seal to protect the power connectors. These waterproof parts are crucial because the TP-link Tapo camera can be installed outdoors.

How to uninstall the TP-link Tapo camera?

Where did you mount your TP-link Tapo camera? If you have mounted the TP-link Tapo camera on the wall, you have to spin anticlockwise to release the camera from the camera bottom. 

If you bought the newly designed camera base and didn’t mount it on the wall, you must insert a coin. Then, rotate anticlockwise to remove the camera. These cameras are the most secure systems with the most straightforward installation and uninstalling process.  

How do you set up the intelligent Tapo TP-link camera?

Before getting familiar with the TP-link Tapo camera setting and its features, you need to know that the TP-link tapo camera has too many types. All these intelligent cameras have the same target: home security WiFi smart cameras.

You can understand the setup process after unboxing the purchased tapo camera. There will be a guideline in its package. We are here to give you a quick start guide. A power adapter and mounting accessories are available inside the box. 

You set your TP-link tapo camera up on a flat surface or mount it to a wall. The first step is setting up the camera, so you will need a WiFi connection and a smartphone to configure it. 

At the beginning point, you have to download the Tapo app. When you enter the interface, you must register or log into your account. Plug in the camera and select the tapo in the app. 

The camera’s LED should alternately blink green and red; if it doesn’t, reset your camera. These smart and modern cameras have a WiFi signal, which you will connect to first. Then, you can use the app to link it to your home network. 

Remember, you can only link to the 2.4 gigahertz spam, not the 5 gigahertz bear. You have to check your camera specifications and details, then try to connect it. In this case, you have set up your camera.

If you want to keep your videos in local storage, insert a micro SD card into the proper place. These cameras support up to 128 gigabytes. 

Once inserted, go to the camera settings and ensure the local recording is active. The SD card is suitable for loop recording.

How do you insert a microSD card? 

In the first phase of most installation processes, you must loosen the screws. These cameras are also the same. You first have to reduce the firm screws. In the next step, you can insert the microSD card for local recording. 

After inserting the microSD card correctly, go to the TP-link Tapo camera setting and micro SD card section. In this step, you can check the status of your inserted micro SD card or format this card quickly. 

How do you set up the TP-link Tapo camera outdoors? 

The best WiFi camera for outdoor comes from TP-Link company. Various Tapo models of this brand are also available in the UK market. Each camera has unique specifications with different:

Although we will explain the TP-link Tapo camera for outdoor, you are free to use these cameras anywhere. You only need the mounting nails template and circles to establish a perfect view on any wall, ceiling, or pole.

Besides all the mentioned features, you can find other special features available on the TP-link Tapo camera box. You can check the working and installing procedure via the manual instructions or guideline template.

As we have said before, downloading the camera app is the initial step of using this camera. Then, you can find all the settings and options to adjust your needs. Inside the box, you can find the complete manual. We know checking the box will increase your choice:

Now you are familiar with the available components of this camera. It is the time to make a connection for the power adapter. Also, the bracket is helpful to install other cameras, but first, you need to insert the cable through the hole, and then you can install the bracket.

How to connect Tapo camera to wifi (Complete set up of TP-link Tapo camera)

We are going to explain to you how to set up a Tapo camera. First, you have to install the Tapo application from the Google Store. After installation, you have to check the home screen of the table application.

You must put your new camera into pairing mode in the next phase. For this step, it is essential to reset the camera. Therefore, you will need to find the reset button. The reset button place is different in various models of Tapo cameras.

For example, in some cameras, the reset button is near the memory card slot. Note that the reset button is near the memory card slot in most Tapo cameras. You can squeeze and maintain the reset switch for 5 seconds.

Then the LED starts blinking; it shows your Tapo camera is in pairing mode, so after the reset process, the camera automatically goes to pairing mode. You can add your new camera to the Tapo app for PC in this part of the complete setup procedure.

It would help if you tapped on the plus button on your smartphone. Don’t forget to select your new camera model, then tap on next. You can see the smartphone screen and ensure your used camera is in pairing mode.

Thump on the attached switch and stay for a complete connection. You also must select a WiFi network that is useable for your smartphone hotspot. Enter the WiFi password or mobile hotspot password, then tap on the next and next again.

Postpone for the camera to link to the WiFi web. In the final step, you can set a new name for the device and tap on next. Don’t forget to select the location, like bedroom, then tap on next. You need to choose one icon from the available list. 

How do you reset the TP-link Tapo camera? 

The TP-link Tapo camera’s reset process is the same as the reset procedure of the TP-link wireless modems. You have to follow the below instructions to reset your TP-link tapo camera: 

How can you connect to a Tplink Tapo camera?

Choosing and purchasing a Tp-link Tapo camera is one thing and installing it is another. You need to read the manual and instructions or watch an installation video to understand how to install a Tplink camera on a wireless router. 

It won’t be hard to install and use Tapo cameras as a security system. You only need to check out 3 essential steps below: 

16 features of a Tplink Tapo camera

Smart door viewers and camera doorbells are previous security items that help you check who is waiting at your door. With time, the Tplink Tapo camera comes to the security market to protect your property more stricter. 

The features of this digital security device are second to none; therefore, you won’t be regretful of the money you have spent on it. Imagine you are not home, and your sister comes to your door. What will happen? 

The Tp link camera will inform you at the moment, so you only need to call your sister and talk to her while she is waiting at your door. The Tapo camera also makes it possible to speak through its microphone. We have mentioned some important and well-done features of Tp-link cameras below:  

Does a Tplink Tapo need a subscription?

Please note that every fantastic security device is purchasable, and you have to subscript it. Tp-link Tapo camera offers a one-month free trial, so you need to subscript it after your free trial. The subscript procedure is the same as below: 

Is it possible to use the Tplink Tapo camera without the internet?

The good news is you can even use the Tp-link Tapo camera and watch videos without any internet connection. There is only one thing to be considered, your phone and the camera must use the same wireless network (such as tp link networking)

You also can store the videos and images on the SD card on your Tapo camera while you don’t have an internet connection. The Tp-link camera needs a WiFi connection for its setup and making a connection with your phone.

But the recording option and showing live view are still possible when there is no internet connection. It is good to know Tapo camera will always need a WiFi connection because the IP address and router make it connect to the phone. 

How to view Tapo camera on a PC? (Tapo app for PC)

The best and most updated feature of the Tplink Tapo camera on pc is the possibility of connecting your PC. The most important matter to viewing the Tplink tapo camera on PC is their same router. It means your PC and camera must use the same router. 

Go to the web to view the camera on your computer (Tapo app for PC), then log into your account and view the camera on your PC. As the Tapo camera owns a third-party protocol, it is possible and easy to view the camera on a PC.

The user should input the URL of the Tplink tapo camera on the PC, player application and watch live videos on their PC. Tapo camera tries its best to make users and customers satisfied and pleasant.  

Conclusion

We have tried to share the most important information about the Tplink Tapo camera. We hope this article will be useful for you so you can choose your security system. 

Tplink camera is one of the most useful security systems to protect your property and avoid unwanted visitors. Don’t hesitate and purchase one of these digital devices to make your property more secure and safer. 

FLIR Systems issues generic manuals that cover several software variants within a software suite. This means that this manual may contain descriptions and explanations that do not apply to your software variant.

The authoritative version of this publication is English. In the event of divergences due to translation errors, the English text has precedence. Any late changes are first implemented in English.

Our manuals are continuously updated and published online.

To access the FLIR Thermal Studio series user manual and other product documentation, go to https://support.flir.com/resources/5sfn/ .

To access the manuals for our other products, as well as manuals for our discontinued products, go to https://support.flir.com/resources/app .

FLIR Thermal Studio is a powerful, flexible, and efficient Windows desktop software for creating thermal inspection reports and automation of editing tasks with large amounts of thermal images. The software supports images and videos in standard FLIR format from all modern FLIR thermography cameras. With the Acoustic plug-in you can also create reports based on images and videos from the acoustic camera FLIR Si124.

FLIR Thermal Studio provides features where the user can:

2.1  FLIR Thermal Studio‎ versions

The FLIR Thermal Studio desktop suite includes several versions and plug-ins.

For detailed specifications, go to https://flir.custhelp.com/app/answers/detail/a_id/4590 .

Read Also : ANNKE VISION General Guide of Watching Cameras

Installation

This chapter describes how to install and activate the FLIR Thermal Studio application.

3.1  System requirements

For system requirements, go to https://flir.custhelp.com/app/answers/detail/a_id/4590 .

3.2  Install application

Note  To complete the installation, the computer may need to be restarted. Follow the instructions on the screen.

3.3  License activation

The first time you start FLIR Thermal Studio you will be prompted to activate your license key. Do this either as an Online activation (internet access) or as an Offline activation (no internet access).

3.3.1  Online activation

3.3.2  Offline activation

3.4  Plug-in activation

Plug-ins are supported by FLIR Thermal Studio Pro.

User interface

This chapter provides an overview of the FLIR Thermal Studio user interface.

4.1  General

4.2  Settings

The application settings are configured on the Settings window.

To open the Settings window, do one of the following:

Note  Some settings require a restart of the FLIR Thermal Studio application before a change goes into effect.

4.2.1  General

Library

User interface

Default import folder

Palettes

Output

Other

4.2.2  Ignite Sync account

FLIR Ignite is a cloud storage service for thermal images. FLIR Ignite Sync is a PC–based (Windows 10) application that allows you to sync your image library with your computer, for easy access when creating reports.

To install FLIR Ignite Sync, click Install Ignite Sync.

Ignite Sync path displays the path to the sync folder as set up in the FLIR Ignite Sync application.

4.2.3  Reporting

Select the Reporting options and the Default fonts to be used in your reports.

4.2.4  Language and region

Select the language and units to be used in the user interface.

4.2.5  Image Overlay

Select if and how you want to use an image overlay when editing images manually in File Explorer and when running batch processing. When you select or deselect a check box in the list of settings, the result is immediately presented in the example image. Note that the Overlay enabled check box must be selected before the settings can be changed.

4.2.6  Camera Live view

Select options for camera captures and recordings.

4.2.7  Updates

Select how you want to manage updates of the FLIR Thermal Studio application.

4.2.8  Plugins

Plug-ins are supported by FLIR Thermal Studio Pro.

Click License to activate a plug-in. For more information, see 3.4 Plug-in activation .

After activation, you can change the settings for the plug-in here.

Note  The Routing functionality is included in FLIR Thermal Studio Pro, without license activation.

Image editor

This chapter describes how to use the image editor.

5.1  General

The FLIR Thermal Studio application includes an embedded image editor where you can edit thermal images and sequences (videos).

To open the image editor, do one of the following:

5.2  Navigation

5.3  Temperature span and levels

At the bottom of the infrared image you have two sliders. By dragging these sliders to the left or to the right, you can change the top and bottom levels of the temperature span. If you change the span to temperatures closer to the temperature of the object you are analyzing, it will be easier to analyze any temperature anomalies.

5.3.1  Auto-adjust control

When you auto-adjust a thermal image, you adjust it for the best image brightness and contrast. This means that the color information is distributed over the existing temperatures of the image.

In some situations the image may contain very hot or very cold areas outside your area of interest. In such cases you might want to exclude those areas and use the color information only for the temperatures in your area of interest. You can do so by defining an auto-adjust region.

To auto-adjust an image, do one of the following:

To define an auto-adjust region, follow this procedure:

5.4  Sketch

You can add an image, e.g. a logo, on top of the image.

5.5  Measurement tool

You can add one or more measurement tools to the image, such as Spotmeter, Rectangle, and Polygon.

Each measurement tool has its own settings, which are available in the Measurements section of the properties pane.

5.5.1  Add a measurement tool

5.5.2  Edit a measurement tool

5.5.3  Change settings of a measurement tool

The tool settings are available in the Measurements section of the properties pane.

To display the tool settings, do one of the following:

5.5.4  Delete a measurement tool

To display the tool settings, do one of the following:

5.5.5  Use the Delta tool

The Delta tool gives the difference (delta) between two measurement results, or between a measurement result and a reference temperature.

5.5.6  Use the Magic wand

Use the Magic wand to capture an area in the image based on pixel temperature. This is similar to the Polygon measurement tool but more advanced and easier to use when you want to capture and measure more complex shapes.

5.5.7  Export to a csv file

Use the Export to csv functionality to export detailed temperature information. The export will include the temperature values of every pixel within the selected measurement tool.

5.5.8  Use coverage

Use the Coverage functionality to see, as a percentage, the number of pixels in an area that are above or below a certain temperature. The area is defined by the outline of a measurement tool, such as a rectangle or ellipse.

The coverage percentage is displayed in the Measurements section of the properties pane. It is also possible to apply a contrasting color to all pixels in the area that meet the temperature setting.

5.6  Shape

You can add shapes to the images, such as arrows, comments, and alerts.

5.6.1  Add a shape

5.7  Palette

You can change the palette that is used to display the temperatures within an image. A different palette can make it easier to analyze the image. The FLIR Thermal Studio application comes with a set of predefined palettes, but custom palettes can also be used.

To change the palette, follow this procedure:

To export a palette, follow this procedure:

5.8  Fusion mode

Use the Fusion mode feature to mix a visual image with its corresponding thermal image. The following fusion modes are available:

To set the fusion mode, follow this procedure:

5.9  Color distribution

Use the Color distribution option to change the distribution of colors in the image. A different color distribution can make it easier to analyze the image more thoroughly. The following distributions are available:

To change the color distribution, follow this procedure:

5.10  Isotherms control

Using isotherms is a good method to easily discover anomalies in a thermal image. The isotherm functionality applies a contrasting color to all pixels with a temperature above, below, or within a certain temperature interval. You can also create your own isotherm formulas.

For building inspection, there are specific alarms for detection of humidity, insulation, and condensation issues.

To add an isotherm or alarm, follow this procedure:

5.11  Crop an image

Use the Crop image option to trim the image. Provided that the cropped image has not been saved, it is possible to revert to the original image size.

To crop an image, follow this procedure:

To revert to the uncropped image, follow this procedure:

5.12  Image rotation

To rotate an image, follow this procedure:

5.13  Filter

Filters for enhanced gas visualization are available for video files (.seq and .csq).

Using the high sensitivity mode and pixel binding filters can make it easier to identify gas leaks.

5.14  Show a profile plot

The plot shows the temperature profile along a line or rectangle in the image.

5.15  Show a time-temperature plot

This plot is available for video files (.seq and .csq). The plot shows the temperature fluctuations over time for the image statistics (max, min, average) and for selected measurement tools.

5.16  Video controls

When you open a video file in the image editor, video controls such as play/pause, auto repeat, and save a snapshot are available at the bottom of the window.

To save a part of the video as a separate file, follow this procedure:

5.17  Save changes

To save the changes in the original file, do one of the following:

To save the image with the changes in a new file, click the button with three dots at the top right corner and then click Save as.

use the numbers below to navigate to other pages

Configuration Instructions For SVStation, Look no further for your next security camera system. Order the best from the leaders in CCTV security. Whether you need a camera system for your business or your home, we are here to customize the perfect solution for you. We offer NVR IP security camera systems as well as HD over coax security camera systems, all suitable for both indoor and outdoor use. You can conveniently place your order online or allow us to prepare a free customized quote for you.

Setting Up SVStation

.

After installing SVStation you will want to add your SureVision NVR or Camera to the software so you can view it. This only needs to be configured one time.

.

Please follow the guide below to help you add your new device.

.

.

Start by launching SVStation. You will be greeted with a login prompt. Use admin for the username and 123456 as the password. This can be changed later!

.

You can select the Auto Login feature if you do not wish to see the login prompt each time you launch the program.

.

You can also Save Password so you do not have to type in a password each time you login.

.

Click Login.

.

.

.

.

.

.

.

.

.

.

Once you have logged into SVStation please select Device Management to add your device.

Inside of the Device Management menu click on Cloud Device on the left column.

If you have registered your NVR already please skip to page X.

If this is the first time configuration click Register. Leave this page open as we will be coming back to it later in this guide

.

You will be redirected to the registration URL to register your device for the first time.

.

Please enter a Username, Password, Confirm Password and a valid Email Address.

.

Click Acquire to send the Verification Code to your email entered. Check email and enter the Verification Code once you receive it.

.

Agree to the terms and conditions and click Sign Up.

.

.

.

.

.

This next menu will allow you to add your NVR to the Cloud Devices. This will enable the NVR from remote viewing.

.

Click Add Device on the top right corner.

.

.

.

In order to add your device you will need to locate your Register Code of your NVR unit. This can be found inside of the following menus.

.

Menu -> System -> Network -> P2P. You will need this code for the next section of the guide.

.

Enter in your Register Code exactly how it is shown on your network P2P menu. Next you need to give your NVR a Device Name. You may name the device anything you would like. Leave your Org Name as root. Click Add when complete.

.

.

.

.

.

.

.

Your device has now been registered and can be remotely accessed from anywhere. You may close this page out once the NVR has been successfully added.

.

.

.

.

.

.

.

We will want to head back to the Device Management section of SVStation where we last left off and choose Login. We will use the Username and Password we just created

.

If you highlight Auto Login you will not need to login each time your open the software to view your cameras.

.

Click Login once your credentials have been entered.

Once you are logged into your account on SVStation click on Device Details towards the top of the screen. Highlight the check box next to your device and click Add.

.

If your device does not show up in the Device Details you may need to refresh the devices associated to your account. Click the Refresh button to do that.

.

.

.

.

Once your device has been added and you are showing an Online status in your device list you may now watch Liveview video.

.

To get to this menu click on the SV Menu or Control Panel tabs towards the top left of the screen.

.

Select Live View.

.

.

.

.

.

Inside of Liveview you can double click on your newly added Device to open every camera connected at once. Or you may double click on one camera at a time to open only one.

.

You can change window views towards the bottom of the page and rearrange camera views by dragging and dropping cameras to the appropriate window.

.

.

.

.

This completes the Remote Viewing P2P guide.

Connecting NVR (LAN Only)

.

.

If you would like to add your cameras only on a local network you can follow the guide below. Please note the following guide will not allow you to remotely view cameras over the Internet. This is for local viewing only. Please see the

.

.

.

.

.

.

.

.

.

.

Inside of the Device Management you will see This menu is split into two sections. Managed Devices and Online Devices.

.

You will first need to find your device in the Online Device section towards the bottom half of the screen. Click on the Checkbox next to the device you would like to add. Once checked click the Add button above.

.

.

.

.

Once the device has been added it will move to the top of the screen under the Managed Devices section.

.

After a few seconds you will see the device status change to Online.

.

.

Configuration Instructions For SVStation

Read More : Hikvision iVMS-4200 Tutorial Videos

.

.

.

.

Now that our device has been added into SVStation we can now exit the Device Management section. This workstation is now ready to view the your cameras!

.

.

.

.

How to Find / Configure IP Camera using

SVTools

Using the SVTools Program, you can find IP Cameras on your network. This may be required for cameras that are not showing up on your network or for easy setup for an individual camera. You can download the tool from our website here.

https://www.cctvsecuritypros.com/surevision-downloads

.

.

To utilize the tool, you first must plug your cameras into a POE Switch that is on the Network or if the cameras on the NVR plug your computer into a POE port on the NVR with the cameras.

.

.

.

.

Once installed you can find cameras by hitting the Refresh button next to the Search Settings button at the top of the application.

.

.

.

.

.

.

.

In the camera list you should be able to identify the camera via the MAC Address if the camera has not been mounted. The Mac Address can be found on the sticker of the camera. A mac Address is identified by its 6 segmented Letters and Numbers. It will usually look something like this “a1:b2:c3:d4:e5:f6”.

Please note that the IP Address of the camera may be different than the one in the IPC Manual depending on if it is connected to a network with DHCP.

If you cannot connect to the camera you may need to set your adapter settings on your computer to match the IP of the camera. i.e. if the camera is 192.168.1.15 set the IP of the computer to 192.168.1.2 with a subnet of 255.255.255.0

For more information on how to change your adapter settings on your computer refer to the Microsoft Support page linked below.

https://support.microsoft.com/en-us/windows/change-tcp-ip-settings-bd0a07af-15f5-cd6a-363f- ca2b6f391ace#WindowsVersion=Windows_11

Once the camera shows up on the list you can select the camera and click Login, the default password for a camera is 123456. Alternatively, you can select the e icon under Configuration to log into the IP address of the camera via the web.

.

.

.

.

.

.

.

.

If you want to make advanced configurations to the camera such as Auto Tracking or IVS, you will need to login over the web interface and download the plugins if prompted.

.

.

.

.

.

.

.

.

.

.

Once you log in with the default information on the

Web it will prompt you to change the password. If you have a system we recommend using the same password as the NVR. You will also be prompted to put in your email. Please put in an email that will always be accessible to you.

Once done you can setup your cameras by navigating

to the Setup page located at the top of the page and you can adjust any settings internally for the camera.

Recommended Settings to Check

If using the camera independently check your Setup > Storage Page and make sure you have your Memory Card is detected and enabled.

.

.

.

.

.

.

.

.

.

Check your camera for Updates under System > Maintenance > Cloud Upgrade. Click on Detect, then Cloud Upgrade. This will ensure that the most recent features are available for your camera. The camera will need to be on a network with internet access for this function to work.

.

.

.

.

You can make changes to your Network Settings on the Setup > Network > Network page. DHCP is the default setting. If set to Static, you can customize the camera IP address, subnet, and Gateway.

If not using an NVR, Under System > Time > Time set your camera to Sync with NTP server and select your Time Zone. This will allow you to enter a time server to automatically sync to the camera. We usually recommend using one of the following servers.

time.windows.com or time.google.com

.

Under System > Time > DST Make sure you set DST to enabled if using NTP and set the Start time to Monday Second Sunday 02 and Nov First Sunday 02. This will enable Daylight Savings Time.

.

.

.

.

.

.

.

.

Cloud Account / Star4live Account Creation

To setup a Cloud Account for your Surevision System you will need to create an account on https://www.star4live.com/login.

To create an account go to Sign Up on their Login Box.

Once on the signup page you will need to fill out the forum listed on the page below.

.

.

.

The username will be the same name you use on the apps such as Surevision, SVStation, or Guardstation.

Make sure you select the correct Region as if your region varies it will not allow you to share your system to accounts in different regions.

Make sure your email is easily accessible as you may need to reset your password.

The Verification code will be sent to the email after you hit Acquire.

The password must be 6-20 characters, including letters (a-z, A-Z), digits (0-9) and symbols and cannot only be letters, digits, or symbols.

.

.

Once you agree to the Service Agreement and Privacy Policy your account will be made. Once you have the account made. Login and you will see a page that will say My cloud Devices at the top.

On this page you will need to click the ADD button to add your system and you can take the Register Code from the Menu > Network > P2P page of the system and input it into the Cloud Devices page.

.

.

.

.

Once added you can view the system on any remote devices that you login using the Username and password you created earlier.

.

.

..

.

2.After the Swann Security app is installed on your phone, the Swann Security app icon appears on the Home or Apps screen. Simply tap the app icon to launch the Swann Security app.

.

....

.

.

.

.

.

.

.

.

Once done, tap the Next button to proceed.

.

.

.

.

email, try checking the Junk/Spam folder. After that, tap the Done button to return to the Sign In screen.

If your phone’s GPS setting is turned off or the location is not accurate, tap to enter your address manually.

Providing your device location helps us personalize your experience on the Swann Security app and other Swann services. Once done, tap the Next button to proceed.

.

.

.

The Remember Me option allows you to save your login credentials so you don’t

have to sign in every time you open the app.

.

To pair your first Swann device, tap on the screen, as shown on the right. Then follow the in-app instructions to connect your device to your home Wi-Fi network and link it to your Swann Security account. Once the pairing process is complete, your device will be displayed on the Live View tab.

...

Note:

Swann Security Android App Manual

Read More : SwannView Plus app download and access

.

.

.

.

.

After you have paired your first Swann device,

....

you can add subsequent Swann devices via:

•the Pair Device menu option in the app menu, or

•the button in the Devices tab.

.

.

.

.

.

.

.

.

.

.

App Menu  Devices tab

.

During the pairing process, you’ll need to scan the device’s QR code which can be generally found on the top, bottom, or

back of the device. See the figures below for examples of where the QR code can be located.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

ID:990a1af6da5a

If your phone can’t scan the QR code

.

ID:990a1af6da5a

.

.

S/N:89052081900001

.

.

  .

At some point, you’ll see a prompt to rate

the app, just follow the prompt, if you want to rate and review the Swann Security App via the Google Play Store.

..

6

5

4

3

2

1

.

App Menu: Tap to open the menu where you can edit your account profile, pair a new device, download the app manual,

1

contact technical support, and more. See “App Menu” on page 10.

Activities Tab: Tap to obtain a detailed report of the current day and past week’s device activities. You can also turn on or off the Do Not Disturb feature, which is helpful when you want to stop receiving push notifications from the app at certain times, such as when you’re sleeping or in a meeting. For more information, see “Activities Tab” on page 23.

2

Playback Tab: Tap to access and playback the event recordings from your devices. For more information, see

3

“Playback Tab” on page 15.

Live View Tab: Tap to view live video feed from all your connected devices in multi-view screen as well as in single-view

4

where you can operate specific camera functions. For more information, see “Live View Tab” on page 11.

Modes Tab: Displays the icon of the currently active mode. Tap to manage modes and configure the behavior of your devices for the Home, Night, and Away modes. You can also set up schedules to automate mode changes. For more information, see “Modes Tab” on page 17.

5

Devices Tab: Tap to view and manage settings for your devices, check device status, perform general maintenance,

6

including firmware updates and device reset. For more information, see “Device Management” on page 24.

.

.

.

.

.

.

.

.

1

.

2

.

3

4

.

5

6

7

.

8

.

9

10

.

Add and manage the Secure+ plan subscriptions for your Swann Security devices.

1

Update your Swann Security account profile name, password, and address. See “Updating your Swann Security

2

Account Profile” on page 36.

3

Pair a new Swann device to your Swann Security account or re-pair an existing Swann device (for example, after the device has been factory reset).

View and manage camera event clips that were downloaded to your phone. See “Viewing Saved Recordings” on page 42.

4

(Selected DVR/NVR only) Link your Dropbox account to your Swann Security account which will enable you to save recordings using Dropbox as an external cloud storage. Refer to your DVR/NVR’s instruction manual for more information on activating the Dropbox feature.

5

Download the latest Swann Security app user manual (PDF file) to your phone. For best viewing experience, open the file using Acrobat Reader (available on Google Play).

6

Display the application version information, your phone model number and the Android OS version. You can also access the terms of service and privacy policy relating to the Swann Security app.

7

Open the Swann.com website where you can find and purchase the latest products to integrate with your current

8

Swann Security system.

9

Obtain technical support for your Swann Security devices. See “Additional Support” on page 48. Sign out of the Swann Security app.

10

.

.

.

1

2

3

4

5

6

.

.

.

.

.

7

.

.

.

.

.

.

.

8

.

Tap to configure settings for the Live View tab. You can hide, resize, or reorder device tiles to suit your preferences.

1

For more information, see “Live View Tab Settings” on page 14.

2

You can change the device tile layout on the screen between list, grid and hybrid (customizable small/large tiles) views.

The device name. You can rename the device via the Devices tab > Select the device > Name. Tap to refresh the live video feed if the streaming has stopped.

Check out other pages for More.

How to: Configure Your Camera with CMS5 PC Software

Once you’ve added your camera to CMS5, you may want to change a few of the settings to get the most out of your new camera. Some of them may not apply to your specific camera, but this guide will help get you up and running if you’re using CMS5.

.

Entering Device Config Menu

Checking SD Card

Motion Recording

Enable Audio

Changing Camera Parameters

Set Camera Time

Playback Footage

How to Configure Gamut CMS5 PC Software

Read More : Gamut Surveillance Client Guide

Entering the Device Config Menu

For all of the steps below, you’ll have to first enter the ‘Device Config’ menu from the main page.

You will then have to select the camera from the ‘default group’ on the left hand pane.

From now on, whenever we talk about navigating to the ‘Device Config’ menu, it means following these steps.

.

Checking SD Card

If your camera has SD card support, you can check the status of the card and format it under the ‘Disk Manager’  window under ‘Device Config’. A window like this means an SD card cannot be detected:

.

If this is the case, ensure the memory card is inserted correctly in to the camera, and then power the camera off and then on. You should see some information populate the card field, such as a total size larger than 0MB. If the card shows an ‘Error’ in the status, you can highlight the row and click ‘Format’ on the side to re-format the card to work in the camera.

Note that the card gets formatted in a way that the CMS5 software can read, through the camera. If you remove the card and insert straight to your computer, it wont be able to be read and your computer will try and format the card before reading, which will remove all of the data. 

.

Motion Recording

If your camera has a built in SD card reader, you can set up motion recording to capture events of interest, rather than sifting through hours of continuous footage. To enable this, navigate to ‘device config’, then select your camera on the left hand side.

.

Enter the ‘record config’ menu and ensure that there is a tick in the ‘detect’ box. You can also set a schedule in the time section for when you want recording events to occur. By default, its set as 00:00 to 23:59, which is 24 hours a day. Click ‘apply’ to update any settings changes.

.

Enable Audio

For cameras with a built-in microphone, or with an external microphone attached, you will have to enable audio for the camera. Now go to the encode option, you will see the mainstream Collom and extra stream Collom with four tick boxes at the bottom.

You will want all four of these boxes to be ticked and then press the apply and ok button.

On the live camera feed, you will see a speaker icon towards the top which you can click on to unmute the sound.

That’s everything set up, you will now be able to get audio on the live video feed from your camera.

.

Changing Camera Parameters

.

All of the cameras we sell will have preset parameters that will be suitable for most applications and usually won’t need to be amended. If you find that you need to change any settings, go to ‘device config’ and then ‘Camera Param’. Some of the settings are explained below:

.

.

Set Camera Time

To keep an accurate log on when events have occurred, and to make searching for files easier, it’s best to keep the correct time set to the camera. Luckily, this is very simple to do. Navigate to the ‘Device Config’ window, and enter the ‘System Config’ menu.

Enter the system time in this menu apply these settings. 

.

Playback Footage

If you have a camera with a built-in SD card, the footage will need to be played back and downloaded through the ‘Playback’ menu in CMS5. 

Select your camera from the right-hand side under the ‘Device’ menu.

Then set the parameters for the footage that you want to view. By default, the time parameters will be for today’s date, but you can modify this range, then click ‘search’.

The list of files and times will display on the bottom bar, as shown below.

Setting up your Gamut Pinhole IP Camera

Before You Begin

Test the Wi-Fi connection strength at the site of your pinhole camera using a smartphone, tablet or laptop. We suggest that you have a signal strength of at least 30%. 

.

Download the XMEye app to your smartphone or tablet.

 Download for iOS        Download for Android

.

Preparing Your Wi-Fi Pinhole Camera

Connecting the Camera Directly

When the camera is powered up, open the Wi-Fi settings on your smartphone or tablet and the following name should appear beye_***. Select and enter the password 1234567890

.

Should this Wi-Fi Network not appear it may mean that you need to reset the camera.  To do this press and hold the reset button for 15 seconds on the camera as shown below.

Once connected, open the app and select the blue wireless icon at the bottom of the screen.

Your camera will be listed, so simply tap on it to check that you are receiving live images. 

.

This method of connecting has limited functionality as you won’t be able to view the camera remotely or from other devices on your network. Furthermore, the range of the Wi-Fi from the camera in this mode is limited. 

.

Therefore, we would recommend to now connect the camera to your Wi-Fi network.

.

Connecting the Camera to Your Wi-Fi Network

First, ensure your smartphone or tablet is connected to the  Wi-Fi network you want the camera to use.

.

Double press the white button found on the end of the cable on the camera.

Make sure you have the list of available Wi-Fi networks displaying on your device. You should see the beye_*** network disappear at the point of double pressing the button on your camera.