How to Use Record and Playback in VMS Enterprise

1. Introduction

For a VMS software, Live View, Record and Playback must be the three most important functions. Milesight VMS Enterprise has powerful video recording and playback, which are the critical parts of the forensic process. This document will introduce how to configure and use these two functions in order to solve some doubts and problems in use.

2. Disk Settings

Ensure that one or more of the server’s disks are enabled and have space left before configuring record. In addition to local disks, NAS external storage is also supported.

Select Settings→System&Servers→Server Settings→Storage Management and enable one or more disks to save record. It is recommended that the hard disk is used for storing recordings only. Move the mouse to the capacity bar to display more capacity information of the disk.

3. Continuous Recording

3.1 Enable Continuous Record

Step1 Select Settings→Devices→Camera Record Schedule→Schedule;

Step2 Click Server List or Group List to show devices from different servers or groups. Click one camera to configure this channel’s record.

Step3 By default, the time bars in the schedule have been all selected. Click Select All or Clear All to quickly choose or clear all times. When the time bar is blank, you can select a time period by crossing over it. Click one time period and then you can modify its specific time. Click  to copy one day’s schedule to others’.

Step4 Enable Continuous Recording and do not forget to Click Apply to save.

3.2 Continuous Record Settings

Step1 Select Settings→Devices→Camera Record Schedule→Record Settings;

Step2 Click Server List or Group List to show devices from different servers or groups. Click one camera to configure this channel’s record.

Step3 Configure specific settings of the camera after continuous recording is enabled.

Table1 Description of the settings

Parameters	Function Introduction
Record Stream	Set record stream as primary, secondary or both of them
Record Contain	Select whether the record includes audio or not
Pre Record Duration	Set the duration of pre-recording from 1s to 10s
Post Record Duration	Set the duration of post-recording from 10s to 60s
Archive Minimum Retention Time	Set minimum time for recording to expire: Auto(delete the oldest recordings based on the disk capacity); Preset times; Custom time from 1 to 365 days
Archive Maximum Retention Time	Set maximum time for the recording to expire: Auto(delete the oldest recordings based on the disk capacity); Preset times; Custom time from 1 to 365 days
ANR	Set whether to enable ANR which needs a SD card inserted in Milesight camera added via MSSP

3.3 Copy Record Schedule and Settings

Both Schedule and Record Settings support copy one channel’s to others’. We take Record Settings as an example.

Step1 Click Copy to and then check the cameras you want to copy the configuration to.

Step2 You can also see all cameras from different Servers or Groups by selecting Server List or Group List.

Step3 Click Save and you will find the checked cameras’ configuration is the same as the first one.

4. Event Record

Event Record of VMS Enterprise is based on Event Rules. So you need to set it in Event Rule Settings interface.

Step1 Select Settings→System&Servers→Event Rule Settings and click Add to set a new rule;

Step2 Select the event which you want to trigger the recording. We take Region Entrance in Front-end VCA as an example. Then click <Any Camera> and all cameras will show up in Server List or Group List. Check one or more cameras as the source and click save.

Step3 Click  to bring up the window of schedule. The way to configure it is just the same as it in Continuous Recording. Don’t forget to click Save.

Step4 Check Do Recording or Primary Emergency Recording in Action List. Primary Emergency Recording is based on recording schedule, which should be configured first at Camera Recording Schedule. Trigger primary stream recording when event occurs.

Table2 Description of the settings

Parameters	Function Introduction	Do Recording	Primary Emergency Recording
Target	Set which camera to record: Source Camera(One-to-one means that event from a particular camera triggers recordings of not all source cameras but only this camera when there are more than one source cameras); Custom selected cameras	√	√
Action Interval	Set time interval between two Actions: Instant; 5s; 10s; Custom time from 1 to 3600s	√	√
Pre Record	Set the duration of pre-recording from 0s to 10s	√	×
Duration	Set the duration of whole action: While Trigger Happening; Custom time from 1 to 3600s	√	√
Post Record	Set the duration of post-recording from 0s to 120s	√	×
Record Stream	Set record stream as primary or secondary stream	√	×
Description of Rule	A brief description as needed for easily finding this rule	√	√

Step5 Configure the event record rule as needed and click Save.

Step6 Click Apply to save the rule changes.

Take the following figure as an example, when Panoramic Dome Camera detects Region Entrance, it will trigger recording its video. Don’t forget to click Apply in Event Rule Settings interface.

Note: All front-end triggers should be enabled on Milesight camera side first. You can configure it in Device Events module.

5. Basic Playback

Click Playback on the top. And then the playback interface will show up. Choose and double click a channel from Server List or Group List to replay your recordings. The icon  means this channel has recordings to play.

(1) Toolbar on the top

Move your mouse to the video, and then the toolbar will show on the top.

Click  to turn on Speaker, and you can adjust the volume of the speaker from 1~100. This item is available only for cameras which support built-in mic or Audio I/O.

Click  to enable digital zoom. A thumbnail of the enlarged position is displayed in the lower right corner. Mouse dragging and wheel scrolling to move and zoom in/out.

Click  to take a snapshot. The blue text will lead you to the snapshot storage path.

Click  to open the Fisheye toolbox. Here are a list for each icon of Fisheye toolbox.

Click  to close this channel’s playback.

(2) Right-Click Menu

Right click the video and the menu will show up.

The meanings of the items on the right-click menu can be referred to the table below:

Item	Description
Stream Type	Auto, Primary and Secondary supported. Auto means the playback video will automatically switch stream according to computer performance.
Display Info	Choose to display stream information at Left or Right, or customize the position of info. You can also hide the stream information.
Split Playback	Divide the video files into several channels during specified time period. Users can watch playback videos of different time periods simultaneously.
Add Tag for	Add tag for the selected cameras or all cameras in the playback panel.
Remove	Choose Selected Views or All Views in Layout to remove the camera playback.
Save As Layout	Click it to save the current layout to Layouts list.
Cell Spacing	Set the cell spacing size among the live view windows in the layout. There are four options available, including None, Small, Normal and Large.
Aspect Ratio	Choose 1:1, 4:3, 16:9, 3:4 and 9:16 to show the window aspect ratio.
Pause/Resume all	Pause/Resume all playback in the current layout.
Turn on/Mute All Speakers	Enable or disable the speakers of all cameras in the current layout.
Stream Type for All	Set stream type for all cameras in the current layout.
Display Info for All	Set to display stream information of all channels in the current layout.
Full Screen	You can choose Layout to display all cameras in the layout to full screen. Click again the Exit Full Screen to restore the normal window.

Right click on a position in the layout where there is no video and the menu will change into:

There are two more items:

Add Tag for All	Add tag for all cameras in the playback panel.
Remove All Views	Remove all cameras’ playback from this layout.

(3) Playback Toolbar

Select a certain channel in the current layout and click     to show the calendar. The blue date and time both indicate availability of recordings. Click the date and time you want to locate to.

Clickto lock recording file, and you can set locked time duration and notes.

Click  to add tags for selected channels, and you can set tag name, note and time duration.

Click  to show Archive Management which can be used to check and retrieve tag and lock files.

Click      to switch to Asynchronous Playing or Synchronous Playing.

Asynchronous Playing: The timeline only represents the recording of selected channel.

Synchronous Playing: Playback all channels in the current layout synchronously. The thick timeline bar represents recordings of currently selected camera, while the thin bar represents recordings of all channels in the current layout.

Click /to play previous or next event video.

Click/to play previous or next frame of the recording.

Click/to adjust the playback speed to 1/32, 1/16, 1/8, 1/4, 1/2, 1X, 2X, 4X, 8X, 16X or 32X.

Click//to rewind, play or pause the video.

Clickto move the current playback time to the center of timeline bar. The short white vertical line which represents the position of the current playback moment will move to the centre of the time bar.

Dragto zoom in/out timeline bar. Or you can just scroll the mouse wheel on timeline bar to do so.

(4) Right-Click Timeline Bar

Right-Click the timeline bar and hold down to drag to move the time bar sideways.

Right-Click the timeline bar, the menu will show up as follows. If there has been a part of video selected and it contains locked video and tags, right-click menu will have more items.

The meanings of the items on the right-click menu can be referred to the table below:

Item	Description
Start Selection/End Selection	Select start/end time of period on the timeline.
Clear Selection	Clear selection on the timeline.
Zoom to Selection	Extend the selected period to whole timeline.
Add Tag	Add tag for the selected period.
Lock File	Lock the selected period.
Split Playback	More Details in 6.2 Split Playback
Export Video	Export the selected period.
Unlock File	Unlock the locked video file.
Edit Tag	Edit tag which you set.
Export Tag	Export tag which you set.
Play Tag Video	Play videos with tag you set.
Delete Tag	Delete tag which you set.
Show Thumbnails	Show thumbnail of the corresponding time. Users can also resize the thumbnail timeline as needed.
Show Tags	After setting the tags, you can choose the option to show the tag on the timeline
Show Locks	After setting the lock files, you can choose the option to show the lock file on the timeline

(5) Tags for Playback

Click the Hide/Show bottom to pop-up right side menu and click the tag icon to show Tags for Playback.

Select which channels to search tags from.

Select which types of tags to search.

Select the time duration for searching tags

Search keyword of tags’ names and notes. Refresh the tag list and chose how to sort the tag list (Tag Start Time, Tag Name, Camera Name and Create Time).

Double click the tag you want, and the video of the corresponding channel then jumps to the time of the tag and flashes the window.

6. Event and Split Playback

(1) Event Playback

If the channel is configured with rule-triggered recording, the timeline bar of Playback will have different colors representing different events.

Click Show Event Mask to check event type to be shown on the timeline, the timeline will show different colors according to selected event type as below:

Click the  button to enter Event Mask Colors Setting interface, it supports customizing different colors for different events according to the user’s requirement.

Click Event Only to exclude continuous recording.

(2) Split Playback

Split Playback allows you to divide a period time of recording into several parts when watching playback, so that users can watch videos of different time simultaneously.

Split Playback setting steps are as below:

Step1: Right click the playback window of a channel and click Split Playback, or right-click the selected time period on the timeline and choose Split Playback, and a window will pop up.

Time Period setting

Specific Number setting

Step2: Check a type to split the video file. If you choose the Time Period, and set Time Interval and Start/End Time, then the channels will be split automatically by VMS system as above. If you choose the Specific Number, and set channel number and Start/End Time, then Time Interval will be calculated and split automatically by VMS system as above.

Step3: After setting, click, and the selected video will be split to new channels to replay asynchronously on the playback layout as shown below:

How to Set VMS Enterprise Event Rules

Ⅰ. Introduction

Event rules are used to associate events and actions. Milesight VMS Enterprise supports rich events, multiple actions and alarm modes, which you can combine freely and configure as your need. Every event can be set to trigger many kinds of actions at the same time. Also, every event can be set to trigger different actions in different time periods. After configuring the event rules, when an event is detected, it can promptly remind or automatically trigger actions according to your settings. In this case, focusing on events becomes easier and you won’t miss the events you care about.

By default, some rules have been automatically created for you in the system. These rules are used to notify the abnormalities that may occur in the system. If an event is detected, you will receive a notification in the Notifications panel. It is strongly recommended to keep them. You can also adjust them as needed.

Ⅱ. How to set an event rule

If you’re not an owner or administration, make sure you have permission for event rule settings.

2.1 Add an event rule

Step 1: Click “Settings” -> “System & Servers” -> “ Event Rule Settings”.

Step 2: Click “Add”, set trigger, schedule and action, then click “Save”.

There are many kinds of events and actions. Different events or actions have corresponding settings. Here you can check the below table to know more about them.

• Trigger

• Action

Note:

When an event is detected, if you want the corresponding camera in live view interface to be prompted with a flashing box, only need to check “Show Flashing Border” in “Settings” -> “Client Settings” -> “Local Settings” -> “Alarm”.

Each event can trigger different actions. If the checkbox of action is disabled, the event doesn’t support triggering this action.

Step 3: After adding event rules, you can see them in the list.

Optional: You can also edit or delete the event rules as needed.

Step 4: 

After completing all operations, click “Apply”.“*” means the rules haven’t been saved, don’t forget to click “Apply”.

Ⅲ. Example

• Setting

Set the following event rules in the system.

①． From 1 p.m to 4 p.m, when a motion event is detected in “ipc demo”, call “ptz demo” preset and show a notification.

②． From 4 p.m to 6 p.m, when a motion event is detected in “ipc demo”, do recording, show notification and email to user “Test”.

③． When any camera in the system has video loss, show a notification.

④． When any camera in the system fails to record, show a notification.

⑤． When any user login the system, show a notification.

⑥． Add an icon to each camera. After clicking the icon, show text in live view of the camera and push the live view of the camera to display on full screen.

• Result

①． From 1 p.m to 4 p.m, when a motion event is detected in “ipc demo”, call “ptz demo” preset and a notification will be shown in Notifications panel.

②． From 4 p.m to 6 p.m, when a motion event is detected in “ipc demo”, a notification will be shown in Notifications panel. User “Test” will receive an email. And you can view the recording in Playback interface.

③． When a camera in the system has video loss, a notification will be shown in Notifications panel.

④． When a camera in the system fails to record, a notification will be shown in Notifications panel.

⑤． When a user login the system, a notification will be shown in Notifications panel.

⑥． After clicking the icon, text will be shown in the live view of the camera.

All events will be recorded, you can view them in Logs interface.

How to Enable VMS Enterprise Multi-Monitor

Chapter I Introduction

“Milesight VMS Client” supports multiple monitors display setting, which supports up to 4 monitors. Multi-Monitor function meets the needs of users for more application scenarios. Each monitor has 4 modes to choose from, including [None], [Live Screen], [Alarm Screen] and [Full Screen]. Both Live Screen and Alarm Screen support up to 64 channels in single screen. The Full Screen only supports displaying 1 channel. In addition, Multi-Monitor function also supports identifying monitors of corresponding screens.

Different screen modes support different functions.

l None: 

No settings are made for other monitors.

l Live Screen:

For this mode, you can add any camera you want to display on the specified monitor so that you can view the real-time video. In addition, the Live Screen mode supports up to 4 monitors and 64 live view channels per monitor.

l Alarm Screen:

For this mode, you need to set the event rules and select the action of [Show on Alarm Screen] for the camera, then the real-time video will be played on the specified monitor when the corresponding event is triggered. This is helpful for users to track camera event in time and view the real-time video.

l Full Screen:

For this mode, you can directly set [Show on Full Screen] for the selected camera in the Live View interface, then the real-time video will be showed on the specified monitor as full screen mode. Of course, you can also set the event rules and select the action of [Show on Full Screen] for the camera, then the real-time video will be played on the specified monitor when the corresponding event is triggered. It solves the inconvenience of not being able to operate other interfaces after the Live View interface channel goes full screen.

l E-Map:

Users can use the E-map function in this mode. 

l Playback:

For this mode, users can search and play back the recorded files of selected cameras.

Note: You can only set one Alarm Screen and one full screen, and there is no limit to the number of Live Screen, E-Map Screen and Playback Screen.

 

Chapter II Operations

2.1 How to Enable Multi-Monitor?

First, click the Enable icon to enable Multi-Monitor and then click [Apply] button to apply Multi-Monitor in the Settings -> Client Settings -> Multi-Monitor interface.

Note:

l This page can only display configuration items of four monitors, even if you have more than four monitors.

l There is no configuration quantity limit for Live Screen, but Alarm Screen and Full Screen can only set one separately.

In addition, you can click [Identify] button to see the corresponding number of each available monitor.

 

2.1.1 How to Set [None] Mode?

If you don’t want to make any settings with the specified monitor, you can select [None] option and then click [Apply] button to apply [None] Mode.

2.1.2 How to Set [Live Screen] Mode?

Step 1: Select [Live Screen] option for the specified monitor and then click [Apply] button to apply [Live Screen] Mode.

Step 2: Drag the camera which you want to show on the specified monitor from the list on the left and move it into the Live View window, then you can view the real-time video on the specified monitor.

Step 3: If you want to close Live Screen, you can move the mouse to the top of the screen to display the top bar, then you can click the icon  and select [Close] button to close it. After the screen is turned off, the monitor will automatically change to [None] Mode. If you want to use Live Screen again, you need to reset [Live Screen] Mode.

2.1.3 How to Set [Alarm Screen] Mode?

Step 1: Select [Alarm Screen] option for the specified monitor and then click [Apply] button to apply [Alarm Screen] Mode.

Step 2: Click [Add] button to add the event rule in the Settings -> System & Servers -> Event Rule Settings interface, then set the trigger type, the source of trigger and schedule you want, and set the action of [Show on Alarm Screen]. After setting the event rule, click [Save] button.

Note:

The following trigger types support the action of [Show on Alarm Screen]:

Front-end Motion Detection, Front-end Audio Alarm, Front-end External Input Alarm, Front-end VCA, ANPR, Record Failure, RTP Packet Loss and Client Trigger.

Step 3: Then the event rule will be added to the event rule list. Click [Apply] button to apply the customized event rule.

Step 4: When the camera is triggered, the real-time video will be played on the specified monitor.

(Note: The picture on the left is Monitor1 and the picture on the right is Monitor2.)

Step 5: If you want to close Alarm Screen, you can refer to Step 3 of 2.1.2 for operation steps.

2.1.4 How to Set [Full Screen] Mode?

Step 1: Select [Full Screen] option for the specified monitor and then click [Apply] button to apply [Full Screen] Mode.

Step 2: Right-click the Live View window for the selected camera, and set Multi-Monitor as [Show on Full Screen] option. Then the Live View window of the camera will be displayed on the specified monitor as Full Screen.

(Note: The picture on the left is Monitor1 and the picture on the right is Monitor2.)

In addition, you can also set the event rule and select the action of [Show on Full Screen] to trigger [Full Screen] Mode. Please refer to Step 2 and Step 3 of 2.1.3 for operation steps.

Step 3: If you want to close Full Screen, you can refer to Step 3 of 2.1.2 for operation steps.

2.1.5 How to Set [E-Map] Mode?

Step 1: Select [E-Map] option for the specified monitor and then click [Apply] button to apply [E-Map] Mode.

 

Step 2: The E-Map interface will display on the selected screen. Click ”Create” button

to create a new map.

 

Step 3: You can drag the camera onto the map and make some further settings.

 

2.1.6 How to Set [Playback] Mode?

Step 1: Select [Playback] option for the specified monitor and then click [Apply] button to apply [Playback] Mode.

 

Step 2: The Playback interface will display on the selected screen. You can search and play back the recorded files of selected cameras.

 

Step 3: If you want to close Playback Screen, you can move the mouse to the top of the screen to display the top bar, then you can click the icon  and select [Close] button to close it. After the screen is turned off, the monitor will automatically change to [None] Mode. If you want to use Playback Screen again, you need to reset [Playback] Mode.