How to install and use Camera Live on a compatible Windows or Mac PC/laptop

Camera Live is a free program for you Windows PC or Mac that can be used to locate its local IP address and to view the camera’s live feed locally and remotely. 

First download the appropriate installation file from the links below and install the program.

For a Windows PC click here

For a Mac click here

Once you have installed the program, open it and click on Add Video. Then click on Discover to find the cameras UID, or enter it manually ensuring it is correct and all in uppercase. Enter the cameras password ensuring this is correct and in the correct case. Then give the camera a name e.g. garden, drive etc. and click on OK.

Once added wait for the camera to connect to the program. When it is connected you will see a green icon next to the UID, you can then view your camera’s live feed by clicking on the play icon. You will see the “No Video” message until you have viewed the live feed for the first time and the program can produce a thumbnail image from this.

.

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Having touble setting up your camera to record to SD card/NVR/NAS drive.

Are you looking to setup recording? If so please see the links below for full setup guides for each recording method. If you have already set it up but have encountered an issue it may be worthwile running through the setup once more, to check for any errors or mistakes.

SD card recording

UCAM NVR recording

NAS Drive recording

If you are still seeing an error or it is not working as expected please take a look at the common issues and their solutions in the list below.

.

SD card not supported or faulty.

Motion detection page not configured correctly

NAS details not entered accurately.

NVR IP address may have changed.

Incorrect Task Management setup

How can I transfer video clips from an SD card in the camera to my computer?

If you are looking to transfer recordings from an SD card installed in the camera to you computer over WiFi this is limited to one file at a time for practical reasons:

.

1) If your SD card had, for example, 128GB of clips it would not only be very cumbersome to transfer that quantity to your computer over your local WiFi but potentially slow down your local network too. As SD cards have very limited file speeds transferring this magnitude of data may also take a very long time to offload.

.

2) It is also impractical or unwise to transfer en masse as it would also cause a slow down of the camera’s capabilities for the time while the transfer is progressing, and your camera could miss key motion events from being recorded.

.

Solutions? There are a number of options available to you:

.

– You can browse the recordings stored on your camera directly from a web browser and check which recordings are important to keep. You can play back the clips in your browser without needing to download to your computer first. Click here for a guide on how to do this.

.

– You can set the sd card to auto overwrite so that it automatically deletes the oldest recordings when the card is full, so you don’t have manually delete.

.

– You can use a number of tasks in the camera to automatically offload clips from the sd card (before they get overwritten) to Dropbox, your own FTP server, etc.

.

– If you really must download everything off the SD card the easiest and quickest way is to take the sd card out and insert directly into your computer (if it supports SD media) and then simply drag and drop the files off the card to your computer.

.

These are but a few suggestions. If you need further advice on the full range of recording and playback options do get in touch with our Support Team and they will be delighted to help.

Cannot connect to the camera remotely using the app.

Are you having trouble connecting to the camera using the app on your phone? This may be a p2p error. The camera and app use p2p to connect, if the camera is unable to connect to the p2p server then it will not be viewable via the app. Click here to check and resolve this.

.

Has the camera been set to a static IP? We do not recommend setting the camera to a static IP as this is not usually required and can render the camera inaccessible if setup incorrectly. Click here to check this has been setup correctly. 

.

Is the UID correct and all in uppercase? If any character in the cameras UID is not in uppercase it will not be able to connect to the app remotely. If this is the case, delete the camera from the app and add it again. For help with this click here for an Android device and click here for an iOS device.

Changed WiFi router or given a new router by your ISP?

If for some reason you have changed/updated your WiFi router your camera(s) will need to be reset to factory defaults and setup again, since the WiFi details and ip addressing on your camera(s) will still be that of your old router.

To reset your camera(s) and start afresh please click here.

NB: Be sure to read and follow the reset instructions carefully to avoid any problems or delay in setup.

.

Once reset you will need to setup the WiFi connection again. Please follow one of the guides below to complete this.

PC Method

App Method

.

WPS Method, for WPS enabled routers.

Power LED flashing rapidly and camera offline?

A rapidly flashing green power LED usually indicates that the camera’s firmware has encountered an error. This is rare but can occasionally happen after an unexpected power cut (if the camera is in the middle of performing a task), due to incorrect settings in the camera (too many enabled tasks, conflicting settings etc.), or due to a faulty SD card. 

This can usually be resolved with a reset of the camera. To do this first power down the camera and leave it for at least 10-15 minutes, then follow the steps on the page linked below to reset the camera. Note: a reset will clear all changed settings in the camera and revert it back to the defaults.

How to reset the camera

If the reset does not clear the error then you should get in touch with our support team using the “contact us” form as they will be able to advise on the next steps to resolve the issue.

How to install and use Camera Live V1

How to reset a camera.

If you think you need to reset your camera we recommend you first get in touch with us using the “Contact us” form as a reset may not solve your issue and will wipe the camera of any user data, meaning you will need to set the camera up again.

But should you want to reset your camera anyway please use either of the guides below.

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

.

There are two ways to reset the camera: physically by pressing the hardware reset button or digitally via the camera’s web interface….

.

Physical reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.

5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.
For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paper-clip or similar.
9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

Digital reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.

8) log in to the camera interface on a PC, see the guide here on how to do this.

9) Go to Setting, Tools, Backup or Reset.
10) Click on Reset, then when it appears click on Reboot.
10) Wait 5 mins for the camera to power up fully, ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is admin (in lower case) for both.

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new. You’ll find the details here: http://ucam247.helpsite.io/categories/3646-camera-setup

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Camera is rebooting often

Do you find the camera does not remain online for any length of time? If so this is usually a setup or a hardware error, typically with the SD card or the recording setup. Please take a look at the troubleshooting guides below to help resolve your issues.

.

SD card not working.

Too many tasks enabled.

Issues with power supply, outdoor cameras.

Cannot view the video from the app.

If you are having trouble viewing video in the app it is likely due to one of the issues listed below. 

Poor Wifi connectivity

p2p disabled

Privacy mode enabled blocking access to the live feed.

Live feed or playback is jerky and not smooth

The first thing to check will be that the camera has a strong WiFi connection. This can be checked in the app by going to Edit Camera, Advanced Setting, WiFi Setting and should be at least 50-60%. A poor WiFi signal can cause the playback of the live feed to be poor. Click here for advice if the WiFi signal strength is poor.

.

If the WiFi connection is strong, the next thing to check will be that the stream setup is set appropriately for your network. The defaults for this are below and can be found by logging in to the camera’s web interface and going to Setting, Camera, Stream Setup.

.

The H.264 bitrate should be left at the default of 1536, raising this can cause the camera to send more data than your router can cope with causing a jerky live stream.

The MJPEG stream should not be set higher than the default of 50. This is an uncompressed stream that is used for the cameras motion detection, not for recording or streaming, raising this can cause issues with the streaming as it puts a high load on the camera.

.

You should also check that you do not have too many tasks enabled, conflicting tasks can cause issues with the camera’s ability to stream well. You should only have one of task 7, 8, 9 or 10 enabled at any one time. For more information on setting up the task management page click here.

NVR IP address keeps changing.

You have setup and NVR with a camera successfully however it stops recording after a short time.

This may be due to your router assigning the NVR a new IP address very often. In this case the best way to prevent this from changing and your details in the Storage Setup page becoming incorrect is by setting the NVR to a static IP address.

To do this please take a look at our setup guide for Setting the NVR to a Static IP address.

Having Trouble With WiFi setup?

Does your WiFi use older WEP Encryption? If so click here

.

Not getting a wireless connection where you have placed your camera? Click Here for more information.

The Optiview VMS supports IP/Megapixel cameras, Analog, HD-over-Coax and IP/Network recorders. Another aspect of this powerful system is the fact that the 64-channel preview screens can be opened in up to 4 windows for live viewing up to 256 channels at the same time.

While all cameras will record on their local recorders, the VMS allows for up to 16 channels to record locally on the home or work PC. 36 channels can be chosen for playback in increments of 24 hour periods.

.

SOFTWARE DOWNLOADS

Right-click and select “Save Link As”

OTHER DOWNLOADS

VMX SERIES SUPPORT

Downloads / Files / Support

Welcome to the comprehensive support page for the Optiview VMX video monitoring platform. This platform, offering both VMX and VMX+ versions, is a potent, integrated solution for single and multi-site surveillance and access control systems. Whether you’re a first-time user or seasoned expert, we’re committed to ensuring that your experience with the Optiview VMX platform is seamless. This page is your hub for downloading all the necessary software and related materials for the Optiview VMX system. As always, if you need more in depth support, call our US based text support line at 904.855.1121.

.

OPTIVIEW VMX

INTEGRATED MULTI-SITE MANAGEMENT SYSTEM

for Single and Multi-Site Surveillance and Access Control Systems

OVERVIEW

The Optiview VMX and VMX+ remote viewing platforms are both powerful, all-in-one professional, project level video surveillance management software. The Optiview VMX Client can be downloaded for free, and will support up to 64 network cameras and intercoms, and supports 1 user account. View up to 512 cameras and 256 Video Intercom devices, integrate multiple access control units, and access advanced analytics by upgrading to the Optiview VMX+.

The Optiview VMX/+ provides user rights management, device management, alarm management, video wall output, and two-way audio. In addition to these VMS features, Optiview VMX/+ offers advanced features, including support for real-time face recognition and robust event management controls.

FEATURES

SOFTWARE DOWNLOADS

OTHER DOWNLOADS

To view the product pages for Optiview VMX Free and VMX Plus click the link below:

Optiview VMX Free

Optiview VMX+

COMPATIBILITY

Optiview VMX is compatible with all Optiview IP-enabled devices: network cameras, NVRs, DVRs, video intercom devices, and access control devices. The server is also compatible with the ONVIF protocol, so it can connect to ONVIF-enabled third-party devices, such as some of Optiview’s third party manufacturers. Call your account managers to talk about our compatability matching.

PLAYBACK

The Optiview VMX platform allows for quick and easy playback of surveillance footage from both the Live footage interface, and the Playback interface. Users can search by time, date, or event type. Users can also zoom in on the timeline, and drag through the timeline with video scrubbing. Download multiple video files at a time, take single frame snapshots, or a ‘burst’ of snapshots.

SMART SEARCH

Search through your surveillance footage quickly and efficiently by using Smart Search, and targeting the area of the screen where motion would have occurred.

INSTANT PLAYBACK

Thought you saw something? Click “Instant Playback” for an immediate jump back in time to 30 seconds in the past to re-review your surveillance footage.

MULTI-MONITOR SUPPORT

Take advantage of complete multi-monitors support.

ADVANCED REPORTING

The Optiview VMX supports heat map, people counting, ANPR license plate capture, attendance and access control reporting.

FLEXIBLE & SCALABLE

Optiview VMX+ supports up to 512 video channels, which includes up to thirty two (32) face recognition cameras. Easily add multiple recorders, cameras, and access control devices from a single-site or from multiple locations around the world.

FISHEYE CAMERA SUPPORT

The software features full support for Optiview Fisheye cameras. The software supports options for the Fisheye camera installation and supports dewarping Optiview’s 360° panoramic fisheye cameras in both live view, and in playback. Because dewarp happens at the software level, the video is always recorded in full fisheye, even if the live view is being dewarped. This allows viewers to see the entire video, and dewarp sections of the video at any given time.

Fisheye

Fisheye Dewarp X4

Fisheye Dewarp X8

REAL-TIME FACE RECOGNITION

The Optiview VMX/+ performs real-time facial recognition on up to two (2) / thirty two (32) channels simultaneously. The software captures and analyzes facial features to determine gender, age, expression, glasses, mustache, and mask, and then can record the faces and store the associated structured data. The server also filters incoming video to display faces that match target features. Facial recognition requires a camera that supports this feature.

ACCESS CONTROL & VIDEO INTERCOM

Optiview VMX offers full support and integration for access control and video intercom products to support a complete security and surveillance system. The server monitors door status and events, manages access rights, and support advanced rules management. In addition to access controls, the server supports two-way communication between intercom and control center.

MANAGEMENT OPERATIONS

The software manages the devices and the user accounts for an entire organization. Operators can assign different camera ranges, active use periods, and business roles for each user. The server also supports different schemes for various events, including IVS, to record and view all event history information.

VISITORS

Quickly register and customize access for visitors.

LPR

Capture license plates in a searchable database.

EMAP

Easily select cameras to view on map.

USERS

Create up to 100 Users per VMX Server.

EVENTS

Track entrance / exit, alarms, access, and more.

.

FREQUENTLY ASKED QUESTIONS

WHAT ARE THE MAJOR DIFFERENCES BETWEEN THE VMS AND THE VMX?

The Optiview VMS and the Optiview VMX are both multi-site remote monitoring software that can be used to view cameras and devices from a centralized location. The VMS is ideal for residential and commercial use, where basic camera surveillance is the primary need. The VMX, however, has an advanced access control module, and can support advanced surveillance such as facial recognition, traffic density, ANPR license plate database capture, and more. See which software is right for you here!

WHY DO I HAVE TO START USING THE VMX?

The free Optiview Video Management Software (VMS) is our legacy remote viewing software, and will no longer be supported going forward. Instead, download our all new Optiview VMX, our powerful new remote viewing software; The user is able to choose between a free VMX, and a more advanced VMX+ with additional features. The new VMX and VMX+ provide a more stable management and viewing platform for CCTV and Access Control, as well as providing many new features. Not sure which solution is right for you? Contact an Optiview Account Manager or compare the Optiview VMX and VMX+ here.

Features Gained:

Optiview’s VMX will support Optiview legacy equipment as well as the latest in megapixel, analytic, and edge recording technology.

WHAT IS THE DIFFERENCE BETWEEN THE FREE VMX AND PAID VMX+ VERSION?

The free version of the Optiview VMX supports 64 video channels, 2 ANPR channels, 2 facial recognition channels, 64 access control channels, 2 POS channels, 4 attendance devices, 2 alarms, and supports only 1 online user at a time.

The paid version allows the user up to a maximum of 512 video channels, 200 access control devices, 1024 doors, 32 video intercom devices, 32 facial recognition cameras, 100 alarms, 32 license plate capture cameras, and supports up to 100 online users.

See which software is right for you here!

WHEN WILL THE VMS STOP BEING SUPPORTED AND AVAILABLE?

The Optiview VMS 2018 will continue to be available to download for a limited amount of time, but will no longer be supported going forward.

WHAT IS THE MAXIMUM NUMBER OF DEVICES THAT CAN BE PUT ON THE FREE VMX OR THE PAID VMX+?

The free version of the Optiview VMX will suport up to 64 cameras. If the user wants to view more than 64 cameras, they will have to purchase the Base License, and then an additional license for each channel, up to 512. See which software is right for you here!

HOW DO I UPGRADE FROM THE VMS TO THE VMX?

The VMX software is completely different from the Optiview VMS and a user can use both. The VMX Server and Client software can be downloaded here.

WHAT IS THE DIFFERENCE BETWEEN THE VMX SERVER AND THE VMX CLIENT?

The server runs all the services and acts as a connection point for several clients that will handle the management of configurations, devices and integrations of one or more IP devices supported by the Optiview VMX software.

IF I HAVE THE SERVER DOWNLOADED, HOW DO I DOWNLOAD THE CLIENT?

The client can be downloaded using the link from the server user interface labeled as “Download Client”. I also made a link for the Client software within our technical support page which Georgia can use, to make a download link within the product resource page.

CAN I DESIGNATE THE NUMBER OF CAMERA CHANNELS BEING SEEN BY THE VMX PER DVR OR NVR?

Yes. The number of cameras “actually” in use by a device (for example a 32-ch NVR) can be designated within the VMX so that it can only sees the actual number of channels. For example, If a user is using multiple 32 channel recorders but not all channels, the VMX can be set to not count every single channel and maximize the usage.

CAN I DESIGNATE THE NUMBER OF ACCESS CONTROL DOORS BEING SEEN BY THE VMX?

No. Whatever the maximum number of doors that an access control panel can handle is, that is what the VMX will see. For example, a CAS-4MC (4 door master control panel) is expandable up to 64 doors, so this will max out the VMX. No additional master control panels can be added unless the user upgrades to the paid version of the Optiview VMX.

CAN I SEE THE HUMAN TEMPERATURE DETECTION & NOTIFICATION SOLUTION ON THE VMX?

The human temperature text overlay can be seen at LIVE mode and Playback mode at the VMX.

HOW MANY USERS CAN ACCESS THE VMX AT ONE TIME?

For the FREE version, only 1 user can access the VMX at any given time, regardless of how many clients are downloaded. With the paid version, up to 100 active users are able to access the VMX Server at any given time via multiple clients. See which software is right for you here!

.

 .

What is DMSS APP?

DMSS is a mobile surveillance app with functions like video playback, remote monitoring, device initialization, push notifications, and remote configuration. Devices like IPC, NVR, XVR, VTO, doorbells, alarms and access controllers can be added. After logging into the account, you can use cloud services like cloud upgrade and so on. The app supports iOS 9.0 and Android 5.0 or later systems and can be used with 3G/4G/Wi-Fi.

 .

What are the benefits of DMSS Camera App?

Remote operations

Before talking about DMSS Camera application on Alexa, let’s see what is DMSS? DMSS app can work in an environment with various internet connections. It connects Dahua CCTV products through both Internet and Ethernet. P2P-enabled internet connection shows great simplicity, while IP or domain name-enabled Ethernet connection guarantees strong stability.

DMSS can be operated remotely to immediately and stably control specific devices all around the world through its global network coverage. many functions including PTZ controlling, video preview and playback, video image adjustment (such as White Balance, focus, etc.), alarm subscription, voice intercom and etc. can be done remotely.

 .

increased data security

DMSS adopts multiple layers of data encryption protection to supply better data security to users.

From a product to the platform and then to the mobile client, DMSS uses multiple layers of data encryption protection to provide better data security to users. DMSS camera has also been certified by TÜV Rheinland, meaning the product complies with the GDPR and meets the TÜV Rheinland 2PfG 2624/06.17 standards, offering state-of-the-art information security and privacy protection.

Featuring a more detailed interaction design, DMSS provides a smoother user experience.

 .

Supports thermal products

To prepare the best support for the global efforts in pandemic prevention and control, DMSS CCTV also supports thermal products (supported by CCTV Suppliers), including access control, thermal cameras, and temperature monitoring terminals. It lets the operators control thermal products remotely and perform their duty in a safer manner.

 .

Setup DMSS App on Alexa amazon

Amazon Alexa is a virtual assistant AI technology developed by Amazon. It is able to voice interaction, music playback, make to-do lists, stream podcasts, set alarms, play audiobooks, and provide weather, traffic, sports, and other real-time information, such as news. Using itself as a home automation system, Alexa can also control your home security camera and even we can set up DMSS application on Alexa. Users are able to increase the Alexa capabilities by installing “skills” (additional functionality developed by third-party vendors, in other settings more commonly called apps) like weather programs and audio features.

Most devices with Alexa let users activate the device using a wake-word (like Alexa or Amazon); other devices (like the Amazon mobile app on iOS or Android and Amazon Dash Wand) require the user to click a button to activate Alexa’s listening mode, although, some phones also let a user say a command, such as “Alexa” or “Alexa wake”.

In September 2019, Amazon launched many new devices achieving many records while competing with the world’s smart home industry. The new Echo Studio became the first smart speaker with 360 sound and Dolby sound. Other new devices included an Echo dot with a clock behind the fabric, a new third-generation Amazon Echo, Echo Show 8, a plug-in Echo device, Echo Flex, Alexa built-in wireless earphones, Echo buds, Alexa built-in spectacles, Echo frames, and Alexa built-in Ring, and Echo Loop.

How to use Alexa for your home security camera?

Using Alexa with a home security camera adds comfort. You can use a smart display screen in your house to immediately and easily review past footage and see who’s at the door right now. Just make sure you have compatible devices and you’ll be using Alexa to check in on your camera (or cameras) in no time. One of the utilities of Alexa is setting up the DMSS application on Alexa. Let’s we how we can do it.

 .

DMSS application on Alexa: How does Alexa work with DMSS?

To add your Dahua device using the Amazon Alexa app:

Let’s assume that you’ve installed and configured your Alexa-compatible home security camera already and you have an Alexa-enabled smart speaker.

Now you need to log in to your Alexa app or make an account if you don’t already have one. Simply download the Alexa app and follow the prompts to sign in/register a new account.

Open the Alexa app and choose “Skills & Games” in the menu. Type “Ring” in the search box, open the skill, and choose “Enable.”

You’ll be asked to enter your Ring account credentials to pair your Ring account to the Alexa app.

 .

How to Download the DMSS Application?

The prefix “g” or “i” differentiate the applications intended for Android and iPhone/iPad and thus we will find them in the official Google Play and App Store:

Before, DMSS Plus was paid while you could get the Lite version for free. There are some differences between DMSS Lite and Plus such as E-Map (visual and functional installation plans), alarm management, and push notifications. Currently, there is no need to choose since Dahua has released the Plus version for free. In addition, this publication is already adapted to the new GDPR (General Data Protection Regulation).

 .

 .

Download Dahua DMSS software

View DMSS APP User Manual

 .

What Functions Do These Apps Offer?

The aforementioned applications have undergone several updates that improve their operation and increase their capabilities so sometimes it is difficult to follow all the news. Therefore, let’s see a summary of what they offer us for the management of our video surveillance devices:

Integration of Other Security Devices

The main novelty is managing DMSS CCTV devices, access control devices, and alarm systems from the manufacturer Dahua in a single app.

 .

Device Management

Among other options, they can be located within a local network (WiFi or LAN), and add devices via IP/Domain, DDNS, and P2P (Easy4IP and Lechange). This last option allows you to add devices by scanning the QR code and even a complete list of devices, very useful for migrating from the Lite app to the Plus version in a single operation.

 .

Live View and Playback of Recordings and Stored Clips

Live, to access and capture live video from added devices, combining channels and cameras. Playback, to consult, capture, cut, and extract the recorded videos. In addition to that, clips and captures can be viewed from the smartphone’s memory.

 .

Channel Configuration

It allows you to modify the coding (image resolution and ratio), image adjustments, PTZ or motorized zoom camera movement control, two-way audio communication with the device, and quadrant display, as more interesting functions.

 .

Notifications and Events

Detection events generated by devices are listed and notified in the app through push notifications. These consist of instant and free alerts supported by the devices and to which we can easily subscribe, depending on the type of detection selected.

 .

Cloud Recording, Cloud Storage Services

Upcoming updates will enable cloud video recording under a subscription service, with per-channel rates for 3, 7, or 30-day recording, and only for cameras that support such functionality.

 .

You can also check:

Best CCTV Brands in the UK

 .

 .

How to See Your Dahua DMSS Security Cameras from the Cell Phone

DMSS is Dahua ‘s free software to connect to your equipment from smartphones. It is used to connect to all current Dahua manufacturer equipment: DVR recorders, HDCVI, NVRs, IP cameras, etc.

This App can be downloaded for free in both the Play Store and the App Store. The Android version is called gDMSS and the iPhone iOS version is called iDMSS.

To connect your Dahua device via P2P on your cell phone, you are going to need:

 .

How to Configure Your Dahua Security Cameras in DMSS

Enter the SN of the device and touch the “Next” button.

Once all the boxes are completed, tap the “Save” button that is located at the top right.

If you followed the steps correctly, it should start viewing your security cameras live. By tapping the back button at the top left, you can return to Start.

 .

How to View Your Dahua Cameras in DMSS

If you followed the steps correctly, you should start viewing your security cameras live.

 .

 .

 .

The red numbered buttons:

 .

The Yellow numbered buttons:

 .

 .

Conclusion

As we saw, you know about DMSS App & can set up Alexa on your camera easily, just you need to go to the menu and tap Skills. Find the relevant skill (some cameras have specific apps for the cameras, outside of their main smart home apps). Enable the skill and link the account with Alexa. It’s a simple thing to set up and it means that you can create a security monitor without ever firing up your smartphone or tablet. All you need is one of the three Amazon devices noted in the intro and a compatible DMSS camera.

Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision

The Following network settings must be checked before adding the device to Guarding vision App.

Method 1: From NVR Local menu

Step 1: Right Click on the NVR Monitor and select “Menu”.

Step 2: Select “Configuration” from the Menu options.

Step 3: Select “Network” and check the option “Enable DHCP” Click “Apply”

Step 4: Make sure your NVR/DVR obtained an “IPV4 Address” and “Preferred DNS Server” values automatically. If not, check your network settings and make sure your device is properly connected to your network router or switch.

Step 5: Select “Platform Access” and check “Enable”.  You will be taken to the service terms window.

Step 6: Create a “Verification Code” check the “Guarding Vision service terms” click “OK”.

Step 7: Click “Apply” to apply the settings. The status will change to “Online”. The QR Code being displayed on your device “Platform Access” page can be scanned with Guarding Vision app to add the device into your App. To proceed with adding the device into the app scroll down to “Adding NVR/DVR to Guarding Vision App”.

Method 2: From the NVR/DVR/IP Camera Web page.

Step 1: Input the IP address of the NVR into the address bar and login with the credentials.

Step 2: Go to Configuration  Network  Basic Settings

Adding the NVR/DVR to Guarding Vision App

Method 1: Using the QR Code

Download and install the Guarding vision app on the Mobile. Register and Create a Guarding vision account on the App.

.

.

.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code”. Scan the QR Code displayed on the NVR’s Monitor.
.

.

.

.

.

.

Step 3: Scan the QR code from the device sticker or Login to the device Local Menu and go to Menu  Configuration  Network  Platform Access to access the QR Code.
.

.

.

.

.

.

.

.

Method 2: Add Device with Serial Number
.

(Only the last 9 digits of the serial number are needed to add the device into the App.)
.

Step 1: Tap on the ‘+’ icon and select “Manual Adding”
.

.

.

.

Step 2: The serial number can be accessed from the device sticker. To access the serial number from the web config, go to Configuration  System  System Settings  Basic Information
.

(Refer to the figure below)
.

Step 3: Once the “Manual Adding” Option is selected, You will be directed to the Add device page with “Serial No.” Input the serial number and click on  to save.

.

.

.

Step 4: Click “Add” to add the Device.
.

.

.

.

.

Step 5: Input the Verification Code that was created and click “OK”.
.

(You can find the code from the device web Config. Go to Configuration  Network  Advanced settings  Platform Access.)
.

.

Step 6: Tap on “Next”. Create a Device name in the “Edit Alias” page. Tap “Save”
.

.

.

.

.

.

Step 7: Tap on “Guarding Vision” at the bottom of the app to see your device listed. Tap on the device name to view the cameras connected to the device.
.

.

.

.

.

.

How to Change Camera names on the App
.

• Slide the device name to the left to view the settings and share icons.

• Tap on the  Settings icon.

• Tap on “Linked Camera”

.

• Click on the Edit icon and input a desired name to the camera and Tap “Save” icon.

• 

Guarding vision Setup from browser (www guardingvision com)

.

Step 1: Open browser (Internet explorer/Chrome) and input the address www.guardingvision.com. And click on “Register” to register for a new account.

Step 2: In the registration page, input the mandatory credentials and select “Email” for registering with email or “Country Code” for registering by a phone number.

Step 3: Once the account is created, select “Device Management” and select “Add” to add a new device.

Step 4: In the “Add Device” pop-up window, input the device serial number (Last 9 digits of the serial number found on the device sticker) and click on “Search”.

Step 5: If the platform access is enabled on the device, then you should see the device on the “Add device” window. Click on the ‘+’ icon for the device. Click on the link for Enabling “Platform Access” https://app.box.com/s/ftj2keo6pvvvkpif9ukquyp7jrvhktwx.

Step 6: Enter the verification code found on the platform access page of the device. Click “Add”.

.

Step 7: Click “OK”. Now the device should be added into the Guarding vision account. To view video stream, download the Guarding vision ass on your mobile phone and login with the account credentials just created.

.

.

Sharing the device:

To share the device with another Guarding vision account, click on the “Share” icon next to the device name

Select “Email” for sharing by email or select “Mobile Phone Number” to share by mobile number. Click on the check mark next to the device and click “Share”.

.

Initialize/Setup SD Card from Guarding Vision App

SD Card Setup for IP Camera from Guarding Vision

.

Purpose:

This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.

(Note: When a brand new SD Card is inserted into a IP Camera, it has to be initialized/formatted before it can start recording data)

.

Steps to Initialize/Format the SD card

Step 1: Open the app, Select ‘Guarding Vision’ on the bottom left and slide the device name to the left and select the icon.

Step 2: Once in the device settings page select ‘Storage Status’

.

.

.

.

Step 3: In the storage status page, select ‘Memory Card’, which will take you to the ‘Initialize Storage’ page.

.

.

.

.

Step 4: In the initialize storage page, select Initialize. This will format or initialize the sd card and the sd card should be ready for recording.

.

Reset device with Guarding Vision

Reset NVR using Guarding Vision

Purpose:

The purpose of this document is to be able to reset an NVR with the vuarding vision account.

Currently Supported HINO devices:

NVR532P16-I4

NVR516P16-I4

NVR732-I8

NVR764-I8

Required Firmware:

V4.1.65 or above

Initial setup for enabling Password reset from Guarding Vision

Step 1: During the initial device setup, make sure the “Reserved Email Settings” option is checked.

.

.

.

Step 2: Since the Reserved email settings option is enabled, the following screen as shown in the figure below should appear. Input the email that you wish to receive a password reset verification code.

(Note: Please enter a valid email)

.

.

.

Resetting password from the Guarding Vision App

Step 1: On the NVR login screen, click on “Forgot Password”

Step 2: On the following screen as shown in figure below, select “Verify by Reserved Email” and click “OK”

Step 3: You will be brought to a screen with QR Code.

.

.

Step 4: Open the Guarding vision App on your phone and go to More  Reset Device Password.

.

.

.

Step 5: Scan the QR Code shown on the NVR screen. You should see a message as shown in the figure below.

Step 6: Check your email to find the verification code and enter the code in the field provided and click on “OK”.

.

Platform Access for Guarding Vision Offilne Issue

Guarding Vision Offline Issue

Purpose:

This document provides steps to fix the Platform Access “Offline” status issue on your NVR/DVR.

Solution:

The most common cause for “Offline” status is when the “Preferred DNS Server” space is empty. Follow the steps below to fix this issue.

NVR Local menu

Step 1: On the monitor connected to the NVR, Right click and go to Menu  Configuration  Network  General

Step 2: Enter the “Preferred DNS server” address as 8.8.8.8

(Note: If “Enable DHCP” is checked, you can check the option “Enable DNS DHCP” which will let the NVR/DVR pullup its own Preferred DNS Server)

Step 3: Click “Apply”. The device might take a few seconds before applying the new values.

Step 4: Now go to Menu  Configuration  Network  Platform Access. The status should show “Online”. The device might take up to 60 sec before showing the new status. Click “Back” wait 60 sec and check the status again.

(Note: You can scan the QR code on your “Platform Access” page to add the device directly to your Guarding Vision App.)

.

Guarding Vision Quick Setup

Guarding Vision Setup Instructions

Setting up the DVR/NVR

Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network.

Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If you have “Enable DHCP” and “Enable DNS DHCP” option on this page selected, then you do not have to perform this step)

Step 3: Select “Platform Access” and check “Enable” and create a verification code. Click “Apply”.

.

(Note: The QR code displayed on the platform access page can be used to add the device into the guarding vision app.)

Adding the device on Guarding Vision App.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code” to scan the QR code being displayed on the NVR monitor. Input the Verification Code that was created under “Platform Access” in the NVR.

.

.

.

.

Step 3: For Manual Adding, input the “Serial No”. For QR code, Scan the QR code from the device sticker or the QR code displayed on the NVR. (Note: You can also scan the QR Code you see on the monitor. Refer to Step 3)

.

Guarding vision sharing and registering

Guarding Vision ‘Register’ ‘Login’ and ‘Share’

Registering on Guarding vision

.

Option 1: Tap on the “register” option. Now in the Register page enter the Mobile Phone number and tap on “Get Security Code”. You will receive a code by “Text”. Input the code you just received and complete the process.

Option 2: Tap on “Register by Email Address” for registering by email. You will receive the security code to the email address entered.

.

How to select Login options on Guarding vision

.

To Login using a mobile number, tap on the “Login by Mobile Phone Number” option. Now input the phone number and password and tap “Login”.

.

.

.

.

Sharing a device on Guarding vision

​

Method 1: Sharing from the Primary account

On the Primary account, swipe the device name to the left to access the “Share” Icon. Tap on the Share icon. This will take you to the “Recipient” page.

In the “Recipient” page enter the email or phone number of the user you want to share the device.

When sharing, make sure the Phone number/email/username are entered as shown in the account details.

Finding Account Details:

On the bottom of the app, Tap on “More” and select “Account Management” to view the Account details like Username, Email address(if used to register) and Mobile Phone Number (If used to register).

.

.

.

Add Stand alone device to Guarding Vision

.

Adding a Stand Alone IP Camera to Guarding Vision App

Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access

Step 2: Check the “Enable Option” you will see a pop-up window asking to create a verification code. Enter the desired verification code and click “OK”

Step 3: You can view the verification code by clicking on the eye lid icon.

Step 4: Click “Save” and refresh the page. The status should turn from offline to online.

.

Step 5: Now you can add the device into guarding vision by entering the las 9 digits of the serial number which can be viewed by going in to

Configuration  System  System Settings.

.

Step 6: Open the guarding vision app on your mobile device and register for a new account.

Step 7: Click on the ‘+’ sign on the top right corner of the app and select manual add for serial number or QR code to scan the QR code on the device sticker

(Note: Playback can be viewed on the App for IP Cameras that support Micro SD Card)

.

Add Device with Static IP into Guarding Vision for Local Access

.

Add IP Camera to Guarding Vision with Static IP Address

Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App.

Note:

Method 1: Adding an online device in the local network

Step 1: Open Guarding vision App and select “Guarding Vision” on the bottom of the App. Click on the “+” icon on the top right to access adding menu.

Step 2: From the Add menu, select “Online Device”

.

.

.

.

Step 3: In the online device list, tap the device you want to add. You will be taken to a details page.

Step 4: The details page shows you the info of the device that you just selected.

(Note: Select the “Add Device to Guarding Vision Server” option available under the “Add” button for remote access over cloud. For this, the device should be connected to the network and  the “Platform Access” option should be enabled from the local menu/web menu for NVR/DVR. For a IP Camera, the “Platform Access” should be enabled from the web menu.)

.

.

.

.

Step 4: in the “Add Device” page, input the Username and Password for the device and click  on  icon on the top right corner to save the login credentials and finish adding the device.

The device should be added to your App.

.

.

.

.

.

Method 2: Manual Adding option

(Note: Using this method, you can add a portforwarded device with a public IP address.)

Step1: Open the App and click on the “+” icon on the top right to access the add menu. Select “Manual Adding”.

Step 2: Select “IP/Domain” to change the adding type.

.

Step 3: Create a name for the device by typing in the “Alias” option.

• Input the “IP address” of the device and the login Credentials. Tap on  icon on the top right to save the values entered.

(Note: If you have a device with a port forwarded IP address, you can enter that public IP address in the address space with the device login credentials.)

.

.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file.  Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed.  Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the  icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings  icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the  icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings (  )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the  option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon (  ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon (  ) for the device. Select Video Channel  and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit (  ) icon and name the tour. Click the checkmark (  ) when finished.

Note: Click the Go icon (  ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the  icon and select the Edit (  )icon.

Step 4: Enter a name for the tour and click the add (  ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play (  ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop (  ) icon in the Tour (  )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon (  )

.

Features:

(Supported features depend on camera features)

For more information download the Alibi Cloud VS Mobile App User Guide.

iOS App

• 

.

Android App

• 

.

.

Alibi Cloud VS

Direct Camera to Cloud Video Surveillance

Our cutting edge cloud-based VSaaS offering has gained significant traction with dealers and end-users and is poised for significant growth in 2023 and beyond. If you are not selling cloud-based video surveillance then you are missing out on opportunities to recession-proof your business. We’ll be hosting demo sessions to show you how simple it is to install/setup and how it saves you time and money by avoiding truck rolls with an easy to use interface that helps you solve most issues remotely. And it is super easy for your customer to use as well, making it incredibly appealing for home and business installs.
Learn how this powerful solution is gaining traction in cannabis, medical, retail/restaurant and education applications.

.

Brivo Cloud Access Control

Brivo + Alibi Security: Better Together

Brivo and Alibi Security bring you the best of both worlds… Unlimited access to Brivo’s world-class solutions and support, plus Alibi’s dedicated sales support & innovative marketing platform. The Brivo Accelerate Program is designed to help accelerate growth of YOUR access control business!

.

Alibi Arsenal

Our FREE Marketing Engine, Ready to Power
Your Business

Marketing is not easy. Alibi Arsenal business growth tools and resources make it easier. This FREE platform can help you generate leads with brandable sales/marketing flyers, get found online with improved Google My Business setup and to turn your current customer base into advocates through a powerful reviews engine. Plus, we give you access to tools that make it easier to tap into your current customer base to generate incremental business by cross-selling products and services.
Come by for a LIVE demo of this platform and to learn how you access these powerful tools.

.

Expect More from
Your Security Provider

.

Alibi Security is a trusted provider of security technology, cloud solutions, and growth enablement services—serving thousands of security professionals for more than 35 years. We are committed to quality, continuous innovation, and the investment in the PEOPLE, SOLUTIONS, and SUPPORT required to help our Dealer Partners succeed.

.

.

Enterprise Performance
– Without Breaking the Bank

Alibi Cloud VS makes enterprise-level cloud surveillance accessible for virtually any-sized application or budget. Featuring an ultra-secure camera-to-cloud architecture, Alibi Cloud VS dramatically reduces your up-front hardware investment and maintenance requirements, saving you valuable time and money. Ideal for both business and residential applications, Alibi Cloud VS is remarkably scalable – and can easily support larger camera counts and multi-site projects.

Centralized
Management

View cameras from single or multiple locations via a single dashboard, simplifying management and streamlining review of your video evidence.

Eliminate Common
Failure Points

Stream directly from camera to the cloud, ensuring you never lose video footage due to a faulty recorder or failed hard drive.

Enhanced
Security

No port forwarding necessary. SSL/TSL handshakes are used to make the connection from camera to cloud, ensuring encrypted transmission up and down. Video is stored in ultra-secure Tier 4 data centers, featuring triple-redundancy and fault-tolerant infrastructure to ensure your evidence is always safe.

Lower Total Cost of
Ownership (TCO)

No recording equipment, minimal maintenance requirements, and on-demand scalability – so you only pay for what you need, when you need it.

.

.

Before referring to this Mobile Application User Guide you must first download and install the mobile application on your mobile device (smartphone or tablet). You can find links to the mobile application(s) on www.alibisecurity.com at the following location:

.

SUPPORT Menu > DOWNLOADS > ALIBI CLOUD VS MOBILE APP

.

Choose the link that applies to your mobile device (iOS or Android), download and install the application. Now you are ready to install and activate cameras.

.

Adding a Camera via the Mobile Application

.

The first time you login to the mobile app, you will be required to enter your username (email address) and the password. The screen will show no cameras attached to your account. You will tap the ADD A CAMERA button on the screen and it will prompt you with a second screen to select the type of camera you want to install. Tap on the ADD A CLOUD CAM section. The next screen gives you specific instructions for attaching your cloud-enabled camera to the network.

.

IMPORTANT: All POE and WiFi cameras must be hard-wired into the local network in order to be discovered by the Alibi Cloud VS solution.

.

Once you have connected the cameras you want to add to your Alibi Cloud VS account to the local area network (LAN) you can tap the CONTINUE button.

.

.

..

.

The next screen displays your local network and the cameras that are available to be added to your Alibi Cloud VS account. Tap on the camera you want to add from the list and you will be prompted to name your camera. Type in a name and choose CONTINUE. The system will ping your camera, check credentials and firmware and connect. You should receive a confirmation screen that the camera has been added then tap CONTINUE.

.

.

.

..

.

To get your WiFi camera to the wireless network you need to connect the WiFi camera to the wireless network. Tap the zone that the WiFi camera is in. This takes you into the camera selector menu. Select the WiFi camera you want to attach and it will open the camera settings menu. On the main screen, under NETWORK

SETTINGS, it will say “Not Connected”. Select this menu option and it will take you into the wireless connection menu, displaying the available wireless networks to connect to.

.

.

.

.

Tap the wireless network you want to attach the camera to. A login screen will open up asking you to enter the password for the wireless network. Enter the password and tap CONNECT. The system will them connect the camera to the wireless network and you will receive a confirmation screen once completed.

.

IMPORTANT: You must keep the WiFi camera hard-wired into the network until you login to the wireless network. Once you get the camera connected to the wireless network you can disconnect the network cable and move the camera anywhere that it has good signal strength to connect to the wireless network.

.

.

.

.

.

.

From the main dashboard screen you have two different ways you can add additional cameras to the system. If you want to add another camera to the same zone you already have setup, simply choose the zone on the main dashboard screen, it will pull up the camera viewing screen and you will tap the Gear icon at the bottom. It will open a screen that shows the current camera(s) assigned to the zone and the ADD A NEW CAMERA button.

Tap this and follow the instructions to add a new camera.

.

.

The second option for adding cameras is to setup a new zone and add the camera to that new zone. From the main dashboard screen tap the + icon in the top left corner of the screen. This opens a new screen that lets you setup a new zone. Click ADD CAMERA and then follow the instructions for adding a new camera explained previously in the User Guide.

.

.

From this menu you can also move cameras currently signed to other zones to the new zone. Simply click SELECT CAMERAS FROM OTHER ZONES. A menu will be displayed showing cameras already attached to other zones. Click the camera and move it to the new zone.

.

After adding the camera you will be taken to the main camera dashboard screen. From this view you can see all of the zones cameras have been assigned to. Select the zone you want to view. An individual thumbnail view of the camera(s) will be displayed. Tap on the gear icon at the bottom of the screen and it will take you into the settings selection menu. Choose the arrow to the right of the camera that you want to adjust settings for and you will be taken to the settings menu for that specific camera.

.

.

.

.

.

.

.

.

.

.

.

PoE Camera Setting Menu

.

.

.

.

.

.

.

WiFi Camera Setting Menu

.

In the settings menu for each camera you are able to control the following settings:

.

.

Account Settings and TouchID/FaceID Login

.

After you login and add a camera to your system you can select the home button at the bottom left of the screen and it will take you to your main dashboard. Select the person icon in the upper right and this will take you into account settings. From here you can enable remote support access, enable/disable push notifications and enable TouchID/FaceID login for easy access when starting the app.

To view live video from your cameras connected to Alibi Cloud VS, go to the main dashboard screen and select a zone to view. Once in the zone, you will see the individual cameras with ‘play arrows’ located in the middle of the thumbnail screen. Simply click on one of the ‘play arrows’ in the thumbnail and live viewing will begin. You will see the word “LIVE” appear at the top of the thumbnail viewing screen. Want to enlarge the viewing area? You can simply turn your smartphone/mobile device to landscape to view in full screen mode.

.

Viewing recorded video (footage) is also very simple. You will need to choose the zone that includes the camera you want to review recorded video from. This will display thumbnail views of all cameras associated with this zone. If you have multiple cameras in a zone, you will see multiple thumbnails. To view recorded footage for

a specific camera tap the clock/rewind icon ( ) at the bottom of that camera thumbnail view. This will take you into the footage screen where you can review a timeline, with detection events noted. You can scroll through the timeline by scrolling with your finger, either up or down, to view events that happened earlier or later in the day.

.

.

There are settings and features on the playback screen that make it easier for you to review video quickly. You can select the ZOOM IN button and the timeline will appear in smaller increments, allowing you to find events more accurately. You tap the MORE menu and adjust playback up to 10x faster than normal.

The SUMMARY button at the bottom of the page lets you create and download a video summary of detection events for the last 24 hours. Simply click the button and the app pulls detection events into a single summary video. Creating a summary takes a few minutes and once completed you have the option to save the 24 hour summary to your mobile device or share it with someone else.

.

If you have forgotten your password or simply want to reset it, you can easily do this by selecting the person icon in the main dashboard screen. Click ‘Logout’ and on the next screen tap ‘Log In’ and it will take you to the main login page. Tap ‘Forgot Your Password?’ and a screen will appear for you to enter your email address. By entering your email address and clicking ‘Send’ you will receive a secure link in your email to reset your password for your Alibi Cloud VS account. This new password will be valid in desktop and mobile apps.

.

.

The tool allows adding and monitoring a large number of cameras simultaneously. The cameras in your network can be automatically found and installed. The program supports IP and P2P connection modes as well as UMSP, HZXM, and HZZN protocols. It could also be necessary to provide the camera’s password to access it. After this step, the devices can be organized by grouping them into different folders. For monitoring purposes, it is possible to divide the workspace into up to 64 regions. Moreover, on the left, there is a panel, from which you can control the selected camera.

In addition to allowing the users to view live video streams, the program also lets you schedule recording sessions and play them later. Likewise, it can take snapshots of specific video frames. Moreover, you can implement alarms to send notifications to a given SMS number.

All in all, QmEye is an excellent solution in terms of the number of cameras and connection protocols allowed. Unfortunately, the tool is not as easy to use as other similar tools and its graphical user interface probably needs a redesign.

This manual has mainly instructions on the installation and usage in Android, iPhone mobile phone.

1.Android

This cloud service platform is the best mobile phone video during the internet era. It consists of front-end acquisition devices, platform servers, and remote view of three parts.

Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application.

Icon description：

Notice: Please click “LoginFree”, directly into the system, without verifying user name and password. And you can get help information without login.
1.1 User register
User register

Click the button “register” on the login menu, then will jump to the register interface.

Enter the register information, click “register” then will be registered.
Note:1 please enter the valid E-mail address in order to retrieve your password when you lost it.

2 No account login version, no such function! 

retrieve the password

On the register clicking the button “login” and jump to “retrieve password” interface.

Input the username, click button “retrieve password”.

If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.

QMeye User Manual 2024

1.2 Real-time preview

In the main menu, clicking “real-time preview
Click “Favorites” button, go to “collection management” interface

Click on the icon, favorites list change into editing state, click icon, you can delete your favorites.
Select one of the devices on “Live list” enters the video preview interface.

Button instruction：

1.3 device management

Click the button” device management” on the main menu and enter “device management” interface.

Icon instruction：

Modify the connection parameter

Click on the icon, select “modify connect parameter”, then into “modify device” dialog box：

A）Click on the icon, return to the device management lists.
B）Click on the icon, save the current configuration.

Modify the name

Click on the icon, select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box.

A）Click “OK” button to save the current configuration.
B）Click “cancel” button to cancel the modifying.
Delete

Click on icon, select “delete’ button to delete the current device directly
Add the catalogue

Click on icon, select “add the catalogue” option, then pops up “add the catalogue” dialog box

A）Click “OK” button, it will be saved the current configuration. Then will be showed in the device management list.
B）Click button “Cancel” to cancel to add the catalogue.
Add the device

Click on the icon to select “add the device” option.

Icon instruction

Add the shot

Please see the operation introduction of “add devices”.

Search the local device

Click on the icon to enter “search” dialog box. If there are some devices in local place, you would search out the corresponding device.

Icon instruction

Click on the icon, then pop up the menu as follows:

A）Add a device: add DVR (multi- channel)
B）Add a shot: add a single camera (single channel)
C）Modify the name: modify the name of the device or shot
D）Modify IP: Modify the IP address, subnet mask, gateway information
E）Modify the device password

1.4 Playback

Click button “playback” option in the main menu, and then select to playback the video.

After select an event type, start time and end time, clicking on the icon will list out the remote video lists, and then click on the item will be selected to play or download videos.

1.5 Alarm management

Click the option of “alarm management” in the main menu

Icon instruction：

Guard

Click on the icon to select “guard” option, pop up the dialog box as follows:

Select the option those need to alarm and click the button “setup” to save the current settings; Click the button “cancel” to cancel the current settings.

Unguard

Click on the icon to select the button “unguard”, cancel the current camera setting.

Note

Click on the icon to select “note” option, and then pop up the dialog as follows:

A）SMS notification: set the cell phone number of alarm notification
B）News push: open/ close the news push setting
In the notification interface, and then into “SMS notification” interface

Icon instruction

Record

Click on the icon to select “record” option, and then pop up the dialog of “alarm record”

The icons instruction

1.6 Local playback

Click on “local playback” option in the main menu, and then into the interface as follows

Click on the icon, the local playback video list change to editing states.

Select the video options that you want to delete, and then click the icon; you can delete the selected local video.

1.7 Image view

Click on “images browsing” option

Click on the icon, the local playback video list change to editing states.

Select the image options that you want to delete, and then click on the icon to delete the selected local images.

1.8 Modify password

Click on” modify password” option in the main menu, and then into the interface as follows:

Click on the icon to save the current modified password.

1.9 Local configuration

Click on “local configuration” option in the main menu, and then into the interface as follows

Function instruction：

Click on the icon to save the current configuration.

.

.

.

.

.

.

.

.

.

.

.

.

2、iphone

.

Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application.

Icon description：

Notice: Please click “LoginFree”, directly into the system, without verifying user name and password. And you can get help information without login.

.

2.1 User register

User register

Click the button “register” on the login menu, then will jump to the register interface.

Enter the register information, click “register” then will be registered.
Note: 1 please enter the valid E-mail address in order to retrieve your password when you lost it.

2 No account login version, no such function! 
retrieve the password

On the register clicking the button “login” and jump to “Retrieve password” interface.

Input the username, click button “retrieve password”.
If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.
.

2.2 Real-time preview

In the main menu, clicking “real-time preview
Click “Favorites” button, go to “collection management” interface

Select one of the devices on “Live list” enters the video preview interface.

  

Button instruction：

2.3 device management

Click the button” device management” on the main menu and enter “device management” interface.

Icon instruction：

Modify the connection parameter

Click on the icon, select “modify connect parameter”, then into “modify device” dialog box：

A）Click on the icon, return to the device management lists.
B）Click on the icon, save the current configuration.
Modify the name

Click on the icon, select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box.

A）Click “OK” button to save the current configuration.
B）Click “cancel” button to cancel the modifying.

Delete

Click on icon, select “delete’ button to delete the current device directly

Add the catalogue

Click on icon, select “add the catalogue” option, then pops up “add the catalogue” dialog box

A）Click “OK” button, it will be saved the current configuration. Then will be showed in the device management list.
B）Click button “Cancel” to cancel to add the catalogue.

Add the device

Click on the icon to select “add the device” option.

Icon instruction

Add the shot

Please see the operation introduction of “add devices”.

Search the local device

Click on the icon to enter “Device search” dialog box. If there are some devices in local place, you would search out the corresponding device.

Icon instruction

Click on the icon, then pop up the menu as follows:

A）Add a device: add DVR (multi- channel)
B）Add a shot: add a single camera (single channel)
C）Modify the name: modify the name of the device or shot
D）Modify IP: Modify the IP address, subnet mask, gateway information
E）Modify the device password
.

2.4 Playback

Click button “playback” option in the main menu, and then select to playback the video.

After select an event type, start time and end time, click the button OK will list out the remote video lists, and then click on the item will be selected to play or download videos.

2.5 Alarm management

Click the option of “alarm management” in the main menu

Icon instruction：

Guard

Click on the icon to select “guard” option, pop up the dialog box as follows:

Select the option those need to alarm and click the button “OK” to save the current settings; Click the button “Cancel” to cancel the current settings.

Unguard

Click on the icon to select the button “unguard”, cancel the current camera setting.

Note

Click on the icon to select “note” option, and then pop up the dialog as follows:

A）SMS notification: set the cell phone number of alarm notification
B）Message push: open/ close the news push setting

In the notification interface, and then into “SMS notification” interface

Icon instruction

.

Record

Click on the icon to select “record” option, and then pop up the dialog of “alarm record”

The icons instruction

.

2.6 Local playback

Click on “local playback” option in the main menu, and then into the interface as follows

Click on the icon, the local playback video list change to editing states.

Select the video options that you want to delete, and then click the button “delete”; you can delete the selected local video.

2.7 Image view

Click on “images browsing” option

Click on the icon, the local playback video list change to editing states.

Select the image options that you want to delete, and then click on the button delete to delete the selected local images.

2.8 Modify password

Click on” modify password” option in the main menu, and then into the interface as follows:

Click on the icon to save the current modified password.

2.9 Local configuration

Click on “local configuration” option in the main menu, and then into the interface as follows

Function instruction：

Click on the icon to save the current configuration.

.

.

QmEye_PC_Client_

1、Install

Double-click to open QmEye installation file, pop up following the installation wizard(The version number may be different, but not influence use)

.

Click “next” until the following interface, click the “install”

.

After the installation of software, pop-up window as follows:

.

Click “finish”

.

.

.

.

2.1 Login

Start the application, the program into the landing interface, as shown in P2-1

.

P2-1 Login

  Enter account and password to log in. If the user does not have the account , you can apply for to register.  And local login is permitted.

2.2 Register

Clicks the “register” on the login interface, enter the registration screen, as shown in P2-2.

.

P2-2 Register

With * is required, fill in and then click the “register”.

2.3 Password lost

If users have account, but forget the login password.You can through the e-mail to retrieve password. Click “Password lost”, Enter the following interface

.

图2-3 Password lost

  Mail QueryL: Check the reserved E-mail information when registering.

  Retrieve Password: System will send an email to the email, according to the prompt to reset the login password

2.4 Main Interface

  After the success of the user login, enter the main interface, as shown in P2-4.

.

P2-4 main interface

  Main interface is divided into four parts, including at the top of the navigation bar(P2-5), he left menu bar – device list and function(P2-6), in the middle of the play rect(P2-7), And at the bottom of the play controls(P2-8)

.

P2-5 Navigation bar

.

P2-6 Device list and function

.

P2-7 The play rect

.

P2-8 Play controls

  The description of each icon function as the following:

2.5 Control panel

.

Picture 2-9 control panel

  .

Screen locking: Lock the screen, in the lock case is not able to do any operation in current interface apart from unlocking.(PS: It is not permitted, on local login mode.)

Log off: logout the client

Playback: to playback the remote video and local video

Photos: view local images save by capture

Password Correcting: modify the user logon password(PS: It is not permitted, on local login mode.)

Alarm Settings: set the front-end device booted and alarm monitoring types(PS: It is not permitted, on local login mode.)

Device Searching: search all device which in LAN

DeviceAdministration: for operation such as rename, add, delete a device.

2.6 Add the Device

2.6.1 Quick Add

     “Control Panel” ->” Device Searching”, then pop up the device searching interface, as shown in P2-10

.

P2-10 search the device

  .

     Select out a device is searched, and then click “add to the list” filling device login ID and password, as showed in P2-11

.

P2-11 add a device to lists

.

Parent directory: add the camera to specific catalogue

Scene name: add to the display name of the user to the device lists.

Username: login username of the device

Password: the login password of the device

Channel NO: view what channel number, start from 1. Completed IPC as 1

Streaming: request to a front- end device stream format while live preview, default is sub stream. Fulfill the above information: after finished, click “add” button

.

.

图2-12

2.6.2Add the device manually

  .

“Control the panel” ->”Device management”, then pop up the device management interface, as shown in figure 2-13

.

.

Picture 2-13 device management

Firstly, select a directory from the device list box, then click “add the cameras” enter the added interface like the following figure:

.

Picture 2-14 add cameras

  .

     Device name: the display name that you add to the user device list, more convenient to people identify (such as living room)

    Device type: lens (the channel of the IPC, DVR\NVR), device (such as DVR\NVR)

    Connection modes: (IP address and port access mode), P2P (cloud- penetration mode)

    Protocol: select the front-end device protocol

Cloud ID: front-end device ID to identify the device, P2P mode exclusive.

Username: the login username of device

Password: device login password

    Channel NO: view what channel number, start from 1. Completed IPC as 1 (if it is the device type, it is the channel number mean: complete 8 if is 8Channel DVR)

    Stream: request to a front- end device stream format while live preview, 0 is main stream,1 is sub stream, default is sub stream.

.

2.7 Alarm setting

“Control the panel” ->”alarm configuration”, then pop up the alarm setting interface, as shown in figure 2-15

.

.

Picture 2-15 alarm setting

     Guard: start 4 alarm types monitoring which you tick

      Unguard: cancel all alarm types monitoring

PC Push: after booting and the related equipment alarm is triggered, the server will push the information to the PC client and prompt the user

Add number: add SMS notice number

Delete number: delete SMS notice number

Turn off the alarm: turn off the alarm, which the PC client is no longer to prompt the push information of device trigger alarm

Open the alarm: turn on the alarm, which the Pc client will prompt the push information of device trigger alarm.

View the alarm information: after starting current PC to view all alarms push messages.

    .

2.8Video playback

2.8.1 Remote video playback

  .

“Control the panel” ->”video playback”, then pop up the video select operation interface, (as shown in figure 2-16), select “remote video” then into remote video playback interface, as shoun in figure 2-17

.

.

Picture 2-16 video types select

.

.

Picture 2-17 remote video playback

      Select a device and set up the query time then click it to acquire the relevant video information. as shown in figure 2-18

.

Picture 2-18 remote video lists

.

  Double click a video to play in the video lists (as follows), double click the playing interface can be full screen.

.

Picture 2-19 remote video playback

2.8.2 Local video

“Control the panel” ->”video playback” -> “local video”, then pop up the local video interface, (as following:

.

.

    Select the local video date that need to view. Query the related video and double click to play.

.

IP Camera

IE Browser User Manual

Preface

Thank you for using our IP camera products. This series of products are all-in-one IP cameras designed for network video surveillance, including box IP camera, infrared box IP camera, dome IP camera, speed dome IP camera, etc. The products adopt high performance and powerful single SOC chip media processor to integrate audio and video capture, compression and transmission. Standard H.264 Baseline and Main Profile coding algorithm ensures clearer and smoother video transmission effect. Built-in Web Server allows users to easily perform real-time monitoring and remote control over front-end cameras via IE browser.

This series of IP cameras is suitable for small and medium-sized enterprises, families, and other environments that require remote network video transmission and monitoring. It is easy to install and operate.

.

.

.

Statement:

.

.

.

.

Readership:

  This manual is suitable for engineers as follow:

.

Notes:

Herospeed Firmware Software Download

.

NVR

The Network Video Recoder support network video access,and it has adopted a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),embedded system technology,storage technology, network technology and intelligent technologies.It can work independently as NVR,or as a powerful security networking system.

.

.

NOVATEK IP Camera

The NT IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom.

NOVATEK IP Camera

.

Rockchip IP Camera

The RK IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ,HDR, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Rockchip IP Camera

Fullhan IP Camera

The Fullhan High-definition network camera has adopted embedded system and a number of advanced IT technologies,which integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Fullhan IP Camera

.

GK IP Camera

GK IP Camera uses an embedded system and a number of advanced IT technologies, such as audio and video encoding and decoding technologies (h.264, h.265, h.265+, H264+), integrated encoding and compression, supporting audio noise reduction, and response cancellation, Support humanoid detection, support full Netcom function, can realize plug-and-play access to the back-end.

.

GK IP Camera

.

XVR

The Embedded Hybrid Digital Video Recorder is compatible with HDTVI,AHD and other coaxial HD specification,which can be accessed to any HDTVI,CVI,AHD,analog and network signal.It can disable numbers of analog channels and convert them to IP channels,which have both functions of DVR and NVR.

.

XVR