DVRCMS.Com

CCTV Super Password

admin — Wed, 19 Jul 2023 14:24:14 +0000

CCTV Super Password, Synthesis of reset methods to recover the passwords of recorders, cameras. Hope everyone supports. If you have new reset methods or other carriers please email me to help me keep up to date with new methods and firms. Thank you.

CCTV Super Password

Default Password List

HIKVISION Reset Password

DAHUA Reset Password

KBVISION Reset Password

RaySharp Reset Password

JUAN DVR Reset Password

FUHO Reset Password

iCATCH Reset Password

TVT Reset Password

VSS Web Reset Password

Xiongmai Tech Reset Password

Camera Manufacturer	Username	Password
3xLogic	admin	12345
ACTi	Admin	123456
ACTi	admin	123456
Amcrest	admin	admin
American Dynamics	admin	admin
American Dynamics	admin	9999
Arecont Vision	admin
AvertX	admin	1234
Avigilon	admin	admin
Avigilon	administrator
Axis	root	pass
Axis	root
Basler	admin	admin
Bosch
Bosch	service	service
Bosch	Dinion
Brickcom	admin	admin
Canon	root	Model# of camera
Canon	root	camera
CBC Ganz	admin	admin
Cisco	no default
CNB	root	admin
Costar	root	root
Dahua	admin	admin
Dahua	888888	888888
Dahua	666666	666666
Digital Watchdog	admin	admin
DRS	admin	1234
DVTel	Admin	1234
DynaColor	Admin	1234
FLIR	admin	fliradmin
FLIR	admin	admin
Foscam	admin
GeoVision	admin	admin
Grandstream	admin	admin
GVI	Admin	1234
HIKVision	admin	12345
Honeywell	administrator	1234
Honeywell	admin	1234
IndigoVision BX/GX	Admin	1234
IndigoVision Ultra
Intellio	admin	admin
Interlogix	admin	1234
IOImage	admin	admin
IPX-DDK	root	Admin
IPX-DDK	root	admin
IQInvision	root	system
JVC	admin	Model# of camera
JVC	admin	jvc
Longse	admin	12345
Lorex	admin	admin
LTS Security	admin	12345
LTS Security	admin	123456
March Networks	admin
Merit Lilin Camera	admin	pass
Merit Lilin Recorder	admin	1111
Messoa	admin	Model# of camera
Mobotix	admin	meinsm
Northern	admin	12345
Oncam	admin	admin
Panasonic	admin	12345
Panasonic	admin1	password
Pelco	admin	admin
PiXORD	admin	admin
PiXORD	root	pass
Qsee	admin	admin
Qsee	admin	123456
QVIS	Admin	1234
Reolink	admin
Samsung	root	4321
Samsung	root	admin
Samsung	admin	4321
Samsung	admin	1111111
Sanyo	admin	admin
Scallop	admin	password
Sentry360	Admin	1234
Sentry360	admin	1234
Sentry360	admin
Sony	admin	admin
Speco	root	root
Speco	admin	admin
Speco	admin	1234
StarDot	admin	admin
Starvedia	admin
Sunell	admin	admin
SV3C	admin	123456
Swann	admin	12345
Toshiba	root	ikwb
Trendnet	admin	admin
Ubiquiti	ubnt	ubnt
UDP	root	unknown
Uniview	admin	123456
Verint	admin	admin
VideoIQ	supervisor	supervisor
Vivotek	root
W-Box	admin	wbox123
W-Box	admin	admin
Wodsee	admin

Company: Hangzhou Hikvision Digital Technology Co., Ltd
Website: http://www.hikvision.com
Device Port: 80, 8000, 554…
Software: iVMS 4200, Hik-Connect….
OEM: 3xLogic, ABUS, Acegear, Activecam, ADJ, Advidia (Video Insight / Panasonic brand), Alarm.com, Alibi (Supercircuits), Allnet, Alula, Anaveo, Annke, Arcdyn, Armix, Aukoo Technology, Aventura Technologies + criminal charges for fake manufacturing, Avue, Cantek, CCTVStar, ClearWay, Covert Security, Dax Networks, DMP, Dodwell BMS, DSS, Dunlop, DVR Unlimited, Ellipse Security, Epcom, Esypop, Ezviz, Global Network Security, GovComm Intelligent Transportation Systems, Grundig, GVS Security, Hinovision, Hitachi, Hitosino,

Honeywell, Hunt CCTV, Hyundai Security, Infinite Pixels, Inkovideo, Innekt, Interlogix (UTC), Invidtech, IP Cam Talk, JFL, Jlinks, LaView, LTS, Mercury Security and Facilities Management, MicroView, Nelly’s Security, Norelco SafeCam / Spider Vue / Invezia, Northern (Tri-Ed / Anixter), Novicam, NTT, Oculur / A1 Security Cameras, Onix, Paxton, Pnet, Power Technology, Protect Group, Raster, Remark Thermal, RVi, Safety Vision, Safire, Scati, SecurityTronix, Sentry CCTV, Sharp, Siqura / TKH, Smart CT Solutions, SnapAV / Luma, Space Technology, Syscom, Technomate, Toshiba, Trendnet, Vantage Security, Vezco CCTV, Videoteknika, Winic, Xyclop, Zicom

Company: Zhejiang Dahua Technology Co., Ltd
Website: http://www.dahuasecurity.com
Device Port: 80, 3777, 3778…
Software: SmartPSS, DSS, gDMSS Lite, iDMSS Lite, iDMSS Plus….
OEM: 2M CCTV, Activecam, Advidia / Panasonic, Altoros, Amcrest, Ameta, Ascendent, Backstreet Surveillance, Bosch, BV Security, CCTV Security Pros, CCTV Star, CP Plus (Orange Line), Dax Networks, eLine, ENS, Expose, Lorex, GSS, Honeywell, IC Realtime, Ikegami, Impath Networks, Inaxsys, IndigoVision, Infinity CCTV, Innekt, Intelbras, KBVision, Lumixen, Maxron, Montavue, Oco, Optiview, Panasonic, People Fu, PlatinumCCTV, RedSpeed, Rhodium, RVI, Saxco, Security Camera King (Elite), Space Technology, Speco, ToughDog, Tyco Holis, Tyco Illustra Essentials, Unisight (EmPower), VIP Vision, Watchnet, Winic, Zuum

Company: Guangzhou Juan Optical & Electronical Tech Joint Stock Co., Ltd
Website: http://www.juancctv.com
Device Port:
Software: Eseenet pro, EROCAM…
OEM: N/A

How to: Press UP button 10 times on the front panel quickly.

Company: FUHO TECHNOLOGY Co., LTD
Website: http://www.fuho.com.tw
Device Port: – 80, 8000, 9000, 15961…
– 80, 8670, 101(102)
Software: Vacron Viewer, Calstillo Player, Tmeye…
OEM: QUESTEK 6600 Series

How to:
User: admin
Password: 86244455
Note: if you can’t reset password with user and password like above. Please power off, and remove pin CMOS (on mainboard), after power on and login DVR with user: admin, password: 010100

Company: iCATCH Inc
Website: http://www.icatchinc.com
Device Port: 80
Software: iWatch DVR II, Bubo Bubo, SCDVR….
OEM: Vantech, QUESTEK

How to:
Method 1: login directly via the monitor with account
User: admin
Password: 12888
Method 2: Reset password with XML file

Download File: XML file
-> copy file to USB. Plug the USB into the DVR -> Wait DVR reboot

Company: Shenzhen TVT Digital Technology Co., Ltd
Website: http://en.tvt.net.cn/
Device Port: 80, 6036
Software: SuperCam, Superlive, SuperlivePro, Superlive Plus NVMS…
OEM: Hisharp, QUESTEK

How to:
Method 1: login directly via the monitor with account
User: admin
Password: 6036huanyuan
Method 2: login directly via the monitor with account
User: admin
Password: ttvvtthuanyuan

Company: Videopark Technology Co., Ltd. (ZenoTech)
Website: http://www.zeno-tech.com/
http://www.videopark.com.cn/
Device Port: 80…
Software: Vss Mobile, Zeno Cam…
OEM: N/A

XMEYE VMS PC CLIENT Setup Guide

admin — Mon, 22 May 2023 20:09:36 +0000

XMEYE VMS PC CLIENT Setup Guide, Please turn off antivirus protection and firewalls in Windows Security. Please make sure the DVR system has been connected to your router via the Ethernet cable. You can check the network connection status from the Startup Wizard.

XMEye for pc

XMEye VMS software

Support windows and MAC computers

DiskPlayer

Playback of H.264 video files

Device Manage

Non-professionals please do not use

XMEye web

Only IE browser is supported.

The future will be eliminated, it is recommended to use computer client software

Read Next :

XMEYE PC CMS Full Guide

Safire Control Center Setup Guide

Uniview Guide EZStation

INSTRUCTIONS FOR USING XMEYE PC CLIENT

Client Downloading and Installation

Please visit https://xmeye.org/xmeye-for-pc/ to download and install the VMS Client following the setup wizard.

Add the DVR system to the Client

Option 1: Add the DVR system automatically

Please make sure the DVR system and your PC are connected with the same router.

Step 1:

Please log in to the client with the default User Name (admin) and Password (admin).

Step 2:

Click OK to add the DVR system automatically.

Step 3:

Tap YES on the pop-up window of “This operation may modify the device’s IP address, whether to continue?”

Step 4:

The DVR you added will be listed on the interface of Device Manager after 10s searching.

Invalid Password:

The VMS Client cannot load the password of the DVR system automatically, you need to modify it by clicking .

Connected:

The DVR system is ready to use.

Offline:

Please check if the DVR system and PC are connected to the same router.

Timeout:

Network may be disconnected, please click to refresh.

Option 2 : Add the DVR system manually

Step 1:

Click Manual Add at the lower left corner on the interface of Device Manager.

Step 2:

Change the Login Type from IP to CloudID and enter the required information on the interface of Add Device.

Device Name:

Set a name for the DVR.

CLOUD ID:

Also called Serial Number. You can get it from Startup Wizard or by accessing System > Version.

Password:

Enter the password you set for the DVR system.

Live Video

Please click Home > Live View to view the live videos from all channels.

Click to select a screen (the selected one will be marked with the white border), then double click to select one channel under the list of Hiseeu, the live video from the channel will be displayed on the selected screen.
For example, select Screen 1 and CAM02, the live video from CAM02 will be displayed on Screen 1.
Double click on one screen to show the channel in full-screen mode, double click again to exit full-screen mode.

Video Recording

You can go to Home > OPERATION > Record Settings to set the disk in which the video will be saved for VMS Client.

Please go to Home > ADVANCE > Record Plan to set the detailed record plan.

Notes:

You need always log in to VMS Client for saving the videos into the Disk of your PC.
Select D:/ to save the videos in case of insufficient disk space and abnormal situation of your PC.
The disk of PC is not designed for surveillance need and long-time recording may cause damage to your disk.
If using VMS Client to record videos is inevitable, it’s advised to use the dedicated server and hard disk for surveillance.

Video Playback

Click Home > Playback to check all the videos recorded.

Check the box before the channel(s) you prefer, select Type of the video, select the Begin and End time, then click Search to list the filtered videos.

Double click on the selected video files to play the video or select one video file, then click button to play the video.

Video Downloading(Backup)

Stay on the interface of Video Playback, click to download the selected video, while click to download the video fragment by time period in this video file. The file you downloaded will be saved to the default path on the PC.

You can go to Home > SETTINGS > Systems Config to modify the path.

The format of the file you downloaded is H264 and the file is encrypted. It only can be played by the exclusive media player and you can download it from here

XMEYE DIGITAL VIDEO RECORDER SYSTEM INSTRUCTIONS FOR USE

This tutorial applies to XMEye digital video recorders.

Safety cautions

Please do not place any container with liquid such as water, coffee, or beverage on the DVR.
Please put the DVR at a ventilated space and do not block the air vents.
For the system security, please use the original power supply provided.
Check the power voltage in case of any damage due to the wrong voltage.
Please obey the local security regulations and policies when installing the product.
If the DVR starts or woks abnormally, please unplug the power adapter and carefully clean the dust on themainboard in the DVR device, then restart the DVR.

Product overview

DVR

Camera

Power Cable Splitter

BNC Cable

Hard Drive Installation

IMPORTANTTo record videos and play the historical videos, the installation of the Hard Disk Drive is a must.
Otherwise,you can only watch the live video.
This DVR system works with a 3.5” SATA Hard Drive.The Hard Drive should be formatted after it’s installed.

System Connections

IMPORTANTDo not fix the AHD camera before you can view the image on the monitor and confirm the ideal position to install it.

1.Plug a power adapter into the DVR and the socket to power on the DVR.

2. Connect a monitor to the HD Output or VGA Output on the DVR with an HDMI cable or VGA cable (not included).

3. Connect the Ethernet Cable with the DVR and your router.

4. Connect the AHD camera with the BNC Cable.

5. Connect the Yellow Video Connector to the BNC Video Input on the DVR, and connect the Red Power Connector to the Male Connector of the Power Cable Splitter.

6. Connect the Female Connector of the Power Cable Splitter with another power adapter. Then plug the power adapter into the socket to power on the camera.

Operate dvr system with a monitor

Startup Wizard

After connecting the DVR and cameras to power, wait for 2-3 minutes. A Startup Wizard will start to guide you via a series of pop-up windows.

Connect the USB mouse to the DVR, then click Next until you see the window of Time-Language Configuration.

1.Select the time zone, date format, time format, language, and set the time for your DVR system.

2. The default password is empty, please reset it for your DVR following the tip.
The new password should be more than 6 digits and use the combination of numbers and letters to ensure your system’s security.

3. Select safety questions and enter the answers for resetting the password if necessary.
You can also enter your email address for getting the verification code to reset the password.

4. Check if the network connection status is normal. If not, you can configure it by clicking Network.

5. Scan the QR code to get the Serial Number of your DVR system and download the App named XMEye into your mobile device.

6. Before fixing the cameras, you can log in to XMEye App to check the live view to confirm the ideal position.

7. Detection based on human shape is enabled by default.
The DVR system will send alerts to your mobile device when there is human shape detected by the cameras.
Please refer to the section of Motion Detect the detailed setting.

IMPORTANTClick Next and OK to exit the wizard. You can right click on the screen, then go to Main Menu > Startup Wizard to bring it up again.
If the wizard is no longer needed, just check the box before Don’t Display the Wizard again on the first interface of the Startup Wizard.

Live Video

You will see the live videos from the AHD cameras in split-screen mode (9 screens by default) after exiting the wizard.

※ Move the mouse cursor to the live video of any channel, some icons may be displayed according to the setting.

Notes:

The icons of and are displayed by default, while for icon , and , please right click andgo to Main Menu > Alarm (see on page 15) to enable them.

2. If you want to loop to display the live videos from some certain channels in full-screen mode, please go to Main Menu > System > Tour to enable this function.

3. For viewing the live video from one channel in full-screen mode, please move the mouse cursor to the desired channel, then double click. To exit full-screen mode, double click again.

Hard Drive Formatting

When you receive the system, the system has a pre installed hard disk, which does not need to be formatted,but if you have to replace another hard disk, it needs to be formatted at first ,then it can be used normally Install the Hard Drive first, then right click and go to Main Menu >Advanced > Storage to check if the type is Read/Write or the status is Normal.

If not, please click Format Storage to start formatting your Hard Disk Drive.

Video Recording

Right click on the screen, then go to Main Menu > Record > Record Conf. to set the record mode and record plan.
This DVR is set to record videos 24 hours a day by default.

Channel:

Select the channel to set the record mode and plan. You can select a single channel or all channels.

Redundancy:

Installing 2 pieces of Hard Disk Drive is required when enabling this function, and HM245 doesn’t support it.

Length:

Set the maximum video length of each recording from 1 minute to 120 minutes. It’s 60 minutes by default.

PreRec:

The camera will start recording a video around 5s before it detects the motion or human shape.

You can reset the time from 1s to 30s, but the accuracy of the pre-recording time may be affected by the bitrate.

Mode:

Set the recording mode and the options are Schedule, Manual and Stop.

Schedule: The camera will record videos according to your record plan.
Manual: The camera will record standard videos 24 hours a day.
Stop: The camera will stop recording videos.

Record Plan:

Set the recording schedules.

Week and Period 1/2/3/4: Set the time period(s) of each day to record different types of videos.
Regular: The system will continuously record standard videos during the time period(s) you set.
Detect: The camera will start recording a video when it detects motion or human shape during the time period(s) you set. If you enable the alarms of Video Blind, Video Loss, and Face Detection, the camera will record the video as well.
Alarm: An extra alarm device is required for this type of video, and HM245 doesn’t support it.

Notes:

The oldest video will be overwritten by the latest one by default when the Hard Disk Drive runs out

of space.

Video Playback

Right click on the screen, then go to Main Menu > Record > Playback to play the video recorded.

You will see the different playback modes in the pop-up window of Play Mode.

Explanation of playback modes

1.Common Playback

Select the channel(up to 4 channels at the same time), a period and a date on Blue background to

play all types of videos recorded.

1. Area for Video Playing
2. Playback Buttons
3. Timeline
4. Channel
5. Filters
6. Filtered Videos List
7. R: Standard Videos
8. M: Videos recorded when the camera detects motion or human shape.
9. Detailed Info. of the Selected Video
10. Search
11. Show/Hide Filtered Videos List
12.Timeline by Hour/Minute

TipFilters will not be available after you left click on the timeline, but you can exit this mode and re-enter to select the filter.

Option 1 :

Left click on the Green/Red (Green for standard videos recorded, and Red for the videos recorded whenthe camera detected motion or human shape) part of the timeline of each channel to play the historical videos.

Option 2 :

Left click on the live video of one channel, show the filtered video list, then double click on the selected video to play it.

Description of Playback Buttons

Left click on the live video of any channel, then start using the buttons to control the video playback.

Tips:

① You can click the icon to cut a video, then click to back up to the external storage.

② Previous Frame and Next Frame work only when pausing the video.

③ The speed of Fast Reverse and Fast Forward will be displayed on the right end of Playback Buttons.

2. Sync Playback

This function aims to put the videos from different channels at the same time to compare.

Select 2 channels at least ( up to 4 channels), a period and a date on Blue background to play the historical videos simultaneously at the selected time on the same timeline.

3. Dayparting

This function aims to put the videos from the same channel but at different time to compare.

Select a channel, number of split screens, and a period to play the videos recorded from this channel on different timelines.

NotesYou need to press and hold the left mouse and move on the bar of Period to select time period.

4. Smart Express

Select one channel or all channels, then select the speed of Fast Playback, the system will play all the videos recorded with the speed you selected.

5. Smart Search

Select one channel and a time period, then check the box before Detect and select a date on Blue background to play the videos recorded when the camera detected the motion or human shape.

※Double click the thumbnail to play the related videos.

6. Face Search

Select one channel, a time period and a date on Blue background to play the videos recorded when the camera detected faces.

Video Backup

Step 1:

Insert the USB disk into the USB port of the DVR system. Right click on the screen, then go to Main Menu >Record > Backup to start.

Step 2:

Select your USB disk, then click Backup to bring up a pop-up window.

Step 3:

Select Channel, Start Time and End Time, then click Add to display all the filtered videos.

Step 4:

Check the box to select the video files and Backup format, then click Start to back up the videos.

Tips:

① The format of the USB Drive should be FAT 32.

② An alternative solution to back up the videos is listed below.

Go to the interface of video playback and click to show the filtered video list.
Check the box to select the videos.
Click to start backing up. The next steps are the same as the first solution mentioned above.

Snapshot Setup

The system will capture the snapshots 24 hours a day when the camera detects motion or human shape.

Go to Main Menu > system> SnapShot Conf. to reset the time interval of capturing a snapshot, and set up the schedules when the camera will capture a snapshot as well.

Alarm

IMPORTANT:

The alarms of Motion Detect and Human Detect are enabled by default. If you need to record videos whenthe camera detects the face or gets blocked as well, please enable Face Detection and Video Blind.

Please go to Main Menu > Alarm to set the alarm you need.

Motion Detect

The camera will start to record videos when it detects motion.

Channel:

Select the channel you’d like to enable motion detection.

Enable:

Check the box to enable motion detection.

Sensitivity:

If you select higher sensitivity, the camera will be more easily to be triggered to start recording videos. It’s advised to select Middle to balance the accuracy and effectiveness of the alarm, thus reducing the false alarms.

Region:

Click Set, then press and hold the left mouse to drag and select the area for detecting. The pink area indicates the selected area.

Period:

Set up to 4 time periods for each day to send the alerts when the camera detects motion.

MD Interval:

Set the time interval of two alerts. It aims to decrease the frequency of the alerts caused by the same moving object.

Record Channel:

The selected channel(s) will start recording when the current channel detects motion.

Tour:

The display will loop to display the live video from the selected channel(s) in full-screen mode when the current channel detects motion. You can go to Main Menu > System > Tour to set the time interval to show the live video in full-screen mode.

Snapshot:

The selected channel(s) will capture a picture when the current channel detects motion.

PTZ Activation:

The cameras don’t support this function.

PostRec:

The camera will remain to record the video around 10s after the motion or human shape detection ends. You can reset the time from 10s to 300s.

Show Message:

After enabling this function, the display will pop up a window to show the Alarm Status for all kinds of alarms when the cameras detect motion, human shape, or more.

Send Email:

Before enabling this function, please go to Main Menu > System > NetService, then double click on EMAIL option to set up your email address to receive the alerts.

Write Log:

The logs of the alerts will be written into the system once you enable this function. You can go to Main Menu > Info > Log to check the detailed log information.

FTP upload:

The system will send the videos recorded or snapshots captured to the FTP server you set when the camera detects motion. Please go to Main Menu > System > NetService, then double click on FTP option to set up your FTP server.

Mobile reported:

The system will send alerts to your mobile device when the camera detects motion. Please install the App and add the DVR to the App following the section of OPERATE DVR SYSTEM ON MOBILE DEVICE on page 18.

Up-to-Coaxial Control

Right click on the main menu and select XVI control to start setting up your camera.

※If the live video from the camera is mirrored or flipped, you can check the box before Mirroring or Overturn to fix it.

※If you set something wrong, please click Restore to get back to default settings.

Safire Control Center Setup Guide

admin — Thu, 18 May 2023 17:56:19 +0000

Safire Control Center Setup Guide

Safire All-in-One Management Software

Manage all security aspects including CCTV, Access Control and/or Time & Attendance

Safire Control Center is the perfect solution for managing CCTV, Access Control, Time & Attendance and video intercom devices. The software allows you to manage camera and recording settings, view multiple camera feeds, and set alerts for tampering, motion detection and smart video analytic. It includes advanced modules in order to get wide metadatas and statistics from various biometric devices. With its intuitive design and added functions this popular software is quickly becoming the most effective choice for managing all aspects of business security.

Safire Control Center software is free to download with any Safire security product and provides comprehensive reporting for all areas of business security. The dashboard is sleek, modern and easy to use with everything you need from one dashboard.

Safire Control Center Dashboard

Safire Control Center Setup Guide 321

Safire Control Center Time & Attendance Settings

Safire Control Center Setup Guide 322

Minimum requirements and computer capabilities for using the SAFIRE Control Center

Intel i5 6th Generation and above (i7 6th Generation recommended).
16 GB of RAM.
Video Accelerator Card 2 GB or more.
DirectX 11.0 or higher.
500 MB of free hard disk space.

Software features:

Can manage up to 256 CCTV devices / cameras
Can manage up to 256 DVRs / NVRs
Supports up to 4 monitors (with 64 simultaneous camera videos).
Supports local and remote (P2P or DDNS) equipment.
Supports two-way audio
Supports local and remote configuration on devices

Safire DDNS services for Safire camera or recorder

To connect any Safire device that has “Safire DDNS services”

Previously, you have to be registered and your account activated before logging in at www.safiredns.com.

1. Create a domain

1. Open and log in to www.safiredns.com

2. Select SafireDNS

3. Add a domain

4. Select the zone

5. In the domain name enter any name as client name or project name

6. Group

7. Group

8. Password

9. IPv4 or IPv6 address (check the myipaddress.com site for your IP address)

10. Save

2. Add a device in ProCloud

1. Go to Procloud

2. And click on + Add device

3. Enter the name of the DDNS address you created in the previous step

4. Save

3. Port Forwarding

1. For Safire’s decisions we need to forward ports 80 and 8000

2. Port 80 is for the web interface of the camera or recorder

3. Port 8000 is for the native communication protocol

ZTE Modem router example

Xiaomi router example:

Reyee router example

3. Enter DDNS type in the camera or recorder

1. Check the ports that are used on the camera/recorder and open the(1) camera/recorder settings page

2. Select Network

3. Then the basic settings

4. Port tab

5. If it does not work, you can check the NAT configuration

6. You can also switch to manual port assignment

7. Enable DDNS on and enter credentials

8. Go to the DDNS tab

9. Enable DDNS

10. Select SafireDNS when using “Safire DDNS Servies”

11. Use the domain you created (in 2. Add a device in ProCloud)

12. DDNS username and password and not those of the device.

When all the configuration has been done correctly it should look like the image below in the Safire ProCloud.

Check that the status icon, the device is linked and the configuration options appear.

How to configure the POS function from Safire Control Center

NOTE:

POS function is present on the entire 8000 series NVR range and the entry-level 4KE range has POS function.

Also in some of the 6000 series (still to be verified)

The POS function on NVRs can only be configured from the local interface of the recorder itself or from Safire Control Center.

In NVRs, the POS is considered metadata (the same as a line crossing or area intrusion, like a VCA).

In XVRs it will not allow the POS configuration from the web interface, since the POS would be “printed” on the video stream itself.

CONFIGURATION POS NVR SAFIRE CONTROL CENTER

In the device management part, click on advanced settings:

We click on POS, and the first thing that appears is the POS rule configuration.

From here we can configure the operating hours, notification link methods, or relay activations, as well as configure the desired camera function by selecting the POS area, how we want it to be displayed on the screen, etc.

Display modes

Scroll: The screen is filled with information, and the first information is scrolled.
Page: The information appears all at once as it is scanned on the screen. If the second piece of information is scanned, the first information is removed.

In the next part, we configure the font. Here we make special mention of the font because not all fonts are supported by the web interface and the Safire Control Center. Only the LATIN-1 font can be displayed in real-time and in the Safire Control Center and web interface recordings.

In the local interface of the recorder, any font that the recorder allows us to use can be displayed.

Finally, the connection mode is to set the IP and port of the printer that will send us the information. We can connect several printers and assign them with the Filter Rule ID so that as you can see in the first screenshot, a different Filter Rule ID should be applied to each channel since a printer is usually used per camera (imagine a supermarket checkout, with several scanners).

When viewing and recording, as I said before that the POS is treated as a VCA, to be able to search by POS later in Safire Control Center, we should set the recording by POS in the recording schedule, like this:

This would suffice.

VISUALIZATIONS

Now, in SCC, if we go to Real-Time we can see the result of the POS as long as we have configured the font as LATIN-1:

In recordings we can search directly by POS events from here:

Search by specific KEYWORDs if we need it:

And finally, we would only get POS events as a result, which if we play it back shows the whole text string printed in the recording:

If, on the other hand, we want to visualize the POS information, from the web interface of the recorder, we don’t have to forget to enable this in the CONFIGURATION -> LOCAL part

Safire – How to recover password by email or recovery questions

To recover the password:

1. Open SADP Tool2

. Click on “Forgot Password”

3. Use the questions or the email option

4. If the email option is chosen

Save the QR and send the QR to the email address pw_recovery@device-service.com as an attachment. (Or use the XML code)

In general, when using automated email services, you will get a retrieval file within 5 minutes.

Note:

This email address only works when you have registered the email address you registered on the device. See the article: Safire – Prepare for lost passwords

When you have received the email

Use the verification code from the email and create a new password

Note:

When deactivating the Safire network cameras that are connected to the NVR for which you have requested password recovery, also select (A) “Reset Network Camera’s Passwords”.

When not using email or questions on the device

Select the secret key export/import mode and send the XML file to your supplier or distributor.

They will process the recovery and get back to you with the key in your mail.

Please note that this is not an automated process and may take time.

Note:

The file you receive is valid for a period of 48 hours. You cannot shut down or restart your computer until after you have completed all the steps.

3. When you receive the recovery file

3.1 In step 2

A. Select import file

B. Import the XML file from the received e-mail

C. Create a new password

D. Confirm password

Safire – How to prevent password loss

You can avoid long waiting times by saving security answers and/or registering a password recovery email.

Tip:

“To view the best and largest GIF or image, right-click and open the image or GIF in a new tab.”

On an already configured camera or recorder

1. Open the web browser or the SCC (Safire Control Center)

2. Open the configuration page.

3. Go to System > Account Management and click Account Security Settings

4. Ask the security questions and most importantly associate an email.

5. And OK to save.

For when you need the password recovery service:

How to recover password by email or questions

Create a device group in Safire Control Center

Note:

In this tutorial, we use SCC (Safire Control Center) Version V3.20.57 build20210726 and a floor plan of an existing shopping mall for this demo

Tip:

“Right click and open the image or gif in a new tab if it is a large image or gif.”

Create a device group in SCC:

Open SCC (Safire Control Center)
Manage Open Devices
In the Device Management section, click Group
Then create a new group and click + Add Group
Give the Group a name
Click op import
Select an option
In the new window select the devices

E-Map in Safire Control Center

Note:

In this tutorial, we use SCC (Safire Control Center) Version V3.20.57 build20210726 and a floor plan of an existing shopping mall for this demonstration

Depending on the situation, creating a group via device management can be useful when there is more than one device for the plant. By making use of P2P devices it is also possible to deploy in the group

Tip:

“Right-click and open the image or gif in a new tab if it is a large image or gif.”

Import the blueprint image into SCC:

Open SCC (Safire Control Center)
Through the main page in the section
General Application open E-map
In the newly opened E-map tab
Click on Add map
Select the map directory
And OK to import the image

Move the devices on the map:

On the left side, you find the devices of the group
Select keep and move the device on the map
You can adjust the size and length through the circles
Click in the grey zone to edit the name and color
Ok to save
When finished

Live camera or open a door in E-map:

Open the E-map in SCC
Click on the camera you want to view
Click on the grey play icon and a new window will pop up to view the camera
To open or one of the other actions
Click on the chosen door
In the new window, select the action

How to manually activate relay outputs on Safire recorders and cameras

To activate the relay output from a Safire video recorder or from an IP camera, we can proceed in two different ways:

Via web component

Via Safire Control Center (SCC), the brand’s main PC software

Via the Safire Connect mobile application – works both via IP (local management) and via P2P (remote management)

How to add a map with the location of the elements in Safire Central

In this article we explain several ways to configure different maps.

Mode 1: create a map from a GIS

First we open the web server to configure it. From the settings part we can generate a map from a GIS file, as shown in the following screenshot:

Then, we go to the Logical Visualization part to define which groups of cameras we create and where we will place them.

To add a camera to the map, select the camera and the following configuration menu will open:

We select the icon we want (we can also import one), and we will click save. Then the camera will appear on the map.

In this way we could create a general map with the devices we want. We click on so that the changes are applied in the Safire Central Control Client and we go right to the Control Client that we just mentioned.

We click on the map that appears in the Safire Central drop-down part to the left of the screenshot, and the map with all the devices that we have configured before will appear in the main part from the web server interface:

Here we can receive the alarms in real time and view the cameras at the time we want.

Mode 2: create individual map

First, we select the group on which we will configure the map:

We enable the map option, we load an image and we give it to save:

Next, we select each device and enable the map option as we have done previously and click save:

And the devices will appear on the map:

Now we go to the Safire Central Control Client, and update the changes as we have done before:

We kunnen zien dat we in de groep van verdieping 1 nu ook een MAP hebben, we kunnen deze selecteren en deze verschijnt op het hoofdscherm:

IMPORTANT: a camera cannot be associated with two different maps (it cannot be associated with a GIS map and an individual map at the same time). If it is selected in the general map, it cannot be associated with another. Similarly, if it is associated with an individual map, it cannot be associated with a general map.

Sending reports by email in Safire Control Center

To receive e-mails with the reports of the users, we will have to carry out the following steps:

Go to the Regular Report section and add as many users as you want to receive the reports:

Then select the user and indicate the email that will receive the report

The configuration of the email to be sent from the software is done from the following section:

It will be necessary to first verify that the sender mailbox that has just been selected is properly configured, that is to say, with all the necessary permits to be used by third-party programs.

Change language in Safire Control Center software 3.2.0.54

Starting from version 3.2.0.54 of Safire Control Center, the language (whose installation pack contained can be downloaded from our web page – https://athena-visiotech.s3-eu-west-1.amazonaws.com/2Oqj_HMB2AJnMa3v3oAI/Safire_Control_Center_V3.2.0.54_MULTI.zip) can be changed from the following section right after starting the software:

If we have activated the auto login without changing the language, we will have to select the following option so that the software does not start directly:

Change language in Safire Control Center

The language can be changed in the pop-up window, where the Login is made, when accessing the software.

How to activate the VCA search filter in Safire Control Center

In the following image you can find the path to access this type of search filter in the Remote Playback menu:

How to install Safire Control Center on Windows Server 2012

Generally if you are installing the software on a Windows Server 2012 account with administrator permissions using the latest version that is digitally signed, you will have no problem.

Windows Server 2012 R2 is supported by the manufacturer and we know that it has been installed correctly on other occasions.

Additionally, we recommend checking if any anti-malware or firewall software may be filtering and preventing the normal installation.

Buttons are failing in Safire Control Center!

What to do when some applications of Safire Control Center 3.1.1 just won’t work or even open?

For example: we press the people button and we visualize the loading roulette, but then it just keeps rolling without actually initiating any process.

We would only have to delete, in the task manager section of our PC, the software watchdog process (32 bits) as shown in the following image. Then, we would just have to run Safire Control Center again.

Blue and Red Flags on the Safire Control Center Calendar

Red: indicates event recording

Blue: indicates continuous recording

Login error whilst opening Safire Control Center

It is possible that this error appears when you start Safire Control Center:

What you need to do to avoid this situation to repeat itself is to change the application port, as the 8080 is usually occupied by other applications (especially the other Safire applications, such as the Safire Control Center AC).

Our recommendation is to change it to anything that is not being used. For example 8081 or 7999.

P2P cloud ports targeted by a SAFIRE device

For both cameras and video recorders that connect to the cloud via P2P service, the ports they use for connection are:

They can be addressed to different domains:

litedev.eu.guardingvision.com
litedev.guardingvision.com
dev.eu.guardingvision.com
litedev.guardingvision.com

On the other hand, the cloud ports are:

Playback speed on Safire recorders from Safire Connect

Here is the table of Safire video recorder models that supports playback speed increase from the app:

SF-HTVR6116-HEVC

SF-HTVR6104-HEVC

SF-HTVR6108-HEVC

SF-HTVR8216A-HEVC

SF-HTVR8104A-HEVC

SF-HTVR8104H

SF-HTVR8108H

SF-HTVR6116A-HEVC

SF-HTVR6108A-HEVC

SF-HTVR6104A-HEVC

The models that do NOT belong to this list are:

– AI recorders

– recorders with audio over coax

– PoC recorders

– models with a higher number of channels, such as 24, 32, etc..

We do not exclude that this functionality will appear in future updates or new versions included in these last 4 groups.

Zoom problems Safire Connect APP

This happens in version V3.10.1.1015 and is resolved with the following update.

The problem is usually the horizontal left-right movement after having entered the digital zoom, since the channel change is prioritized over the displacement within the same zoom.

Possible solutions:

– select only the camera of interest before opening its image, rather than selecting it from a group of preloaded video streams

– perform a vertical physical movement (up-down) and, without lifting the finger, perform the horizontal movement, which will already be done correctly.

A video clip follows to better understand the second option.

video_2019-11-08_11-…mp4