Voice prompt description in the process of adding a device

Pressing the “RESET” button triggers a long “beep,” indicating the device is in network configuration mode.

3. Two “Beeps”:

Emitting two beeps signifies the device received a request to add when scanning a QR code or receiving Wi-Fi information.

Blurams Cameras Installation and Connection Guide

4. “Camera is having trouble finding your network, please check your network name again and move the camera closer to your router”:

Indicates Wi-Fi connection issues. Retry device addition, ensuring:

a. Connected to a 2.4G Wi-Fi, not 5G.

b. Correct Wi-Fi password.

c. Device proximity to the router.

5. “Camera is having trouble connecting to the network, please try re-entering your password”:

Alerts mismatched Wi-Fi name and password. Retry, ensuring accurate Wi-Fi details.

6. “Camera is having trouble finding your network, please try moving camera closer to your router”:

Suggests weak Wi-Fi signal. Retry with the device closer to the router.

7. “Wi-Fi connection successful, camera is trying to connect the server”:

Indicates successful Wi-Fi connection; device is attempting server connection.

8. “Wi-Fi network error, the camera is having trouble connecting to the network, please try again later”:

Signifies server connection failure. Check if Wi-Fi network can access the Internet.

9. “Configuration is complete, please wait for the camera online”:

Marks successful device addition. Complete remaining configuration steps as guided for device usage.

If you are still unable to connect to the network, please provide the following information, and contact our customer support team at support@blurams.com for assistance.

How can I add a new device/ connect to network?

Different device models need to be added in different ways depending on your smartphone and device model, there are four ways to add devices based on the device’s functions. Before you start adding devices, please note the following points:

Different adding methods will be different due to different attributes of the device.

QR Code(Wi-Fi Connection)

AP Mode(Wi-Fi Connection)

Network Cable Connection

Bluetooth Connection

The Outdoor Lite2 indicates “Network Error”

If the outdoor lite2 (A20) indicates “Network Error”, please try to take a look at the below steps:

1, Connect the Ethernet cable from the router and power up the camera.
2, Add device using the App WiFi method, prompt with say Connection Successful.
3, Ethernet can be unplugged and Wi-Fi connection will be established.

If the issue still can’t connect via the Ethernet cable, please contact the support team email for advice.

Also, if you have the SD card and SD card reader, update the firmware will fix this issue also.

.

How to access the camera on PC

If you want to access the camera on web browser, there are two ways to access the web client.

1, Please go to the web client via the below link.

https://client.blurams.com/login

2, Please go to our official website, tap the “My device” to access the web client.

How to change the email address for the account?

If you want to change the email address for the account, we are so sorry it can’t be changed. The Blurams account is only linked to one email address, and it can’t be changed after registration.

If the old email address is unavailable, we suggest that you can register a new account with the new email address, then add the camera under the new account.

Please note: If you set up the camera under the new account, all the video data, Blurams Guard plans, and camera settings will still be under the old account, and it can’t be transferred to the new account.

Why the lens is rotated by itself or out of control?

If the device is rotated by itself or out of control, please try to troubleshoot it by following steps:

1, Please check if the Motion tracking function is on, if not, please turn off it. (Picture 1)

2, Please check if the Auto Cruise function is on, if not, please turn off it. (Picture 2)
3, Restart the device.
4, If the device still rotates by itself, please provide a video about it, and please attach the MAC address.

Can’t scan the QR code

If the Blurams Cam can’t scan the QR code, first, please make sure the device is red light blinking, please try to troubleshoot the issue by taking the below steps:

– Remove the camera’s lens protective film to make sure the lens is clean

– Adjust the smartphone screen brightness, Switch the App theme to Light, please go to the Blurams app >- Me >- Settings >- Theme, switch to Light mode

– Place the home security cameras on a table or platform, adjust the phone to let it scan the QR code

– Tap the QR code to enlarge it

– Adjust the distance between the lens and screen, the best distance is 3 ~ 5 inch

Please note: the device model A21C Outdoor Pro canadd it via the AP mode, it doesn’t need to scan the QR code; The outdoor lite2, outdoor lite3 supports connect via the Ethernet cable also.

How to remove or delete a device under my account

When you need to transfer a device to another account, or return it back, please delete the device from your account.

.

You can delete the device by selecting the “Remove Device” option on the device’s [Preferences/Settings] ”

If the device is associated with a Cloud Service, when the device is removed, the Cloud Service will be unassociated with this device.

This will not affect your other devices.

You can manage all Cloud Services under your account through “Me” -> “Cloud Service” -> “My Cloud Service”.

In addition, it is worth noting that when the device is removed, please save your video data to avoid data loss due to accidental removal.

Change the network

If the device is offline:

If the device is offline, you can only connect the device to the new router by re-adding the device. You can connect the device to the new router through the [Troubleshooting] button on the device list, [Update Wi-Fi] in the [Preferences/Settings], or by adding a new device.

If the device is online:
When the device is online, you can go to the device’s [Preferences/Settings] -> [Network Info] -> [Update Wi-Fi] to connect the device to the new router. After entering this section, the available Wi-Fi list scanned by the device will be automatically loaded. Select the Wi-Fi to which you need the device to connect and enter the password, and this Wi-Fi information will be sent to the device. The device will then try to connect to the new Wi-Fi. Even when the device is online, connect the device to the new Wi-Fi by adding the device again.

My device appears disconnected or offline

If the device shows that it is disconnected or offline, it may be caused by short-term network fluctuations or changes in the network conditions of the environment where the device is located. Please re-add firstly by the methods in 2.2 and if re-adding doesn’t work then check the following steps of your wifi environment:

What do the different status light colors mean?

Status lights on devices are an important tool that can help you find out what a given problem is. They can be divided into the following types:

Note: if the camera’s status light keeps solid red or green light even if press the set button, please contact the support team for advice.

Apple Siri set up guide

If you want to voice command the device, like turn on/ turn off/ show the live stream, please try to enter the Blurams app [Discover]>- [Siri Shortcuts].

Prerequisites for use:
1. Siri voice control function only supports iOS12 and above systems;
2. Only supports English and Simplified Chinese;
3. The shared device does not support adding shortcut commands.

Steps for usage:
1. Open the app and click the Discover button in the bottom navigation bar to enter the discovery page
2. Click Siri Shortcuts to enter a new page. Each device supports 3 commands individually.

The three commands are defined as follows:
1) Show the camera: call up the blurams APP, jump to the playback page to play the real-time video of the corresponding camera.
2) Turn on the camera: without manually open the blurams App, directly open the corresponding camera automatically.
3) Turn off the camera: without the user manually opening the blurams App, the corresponding camera is automatically turned off directly.

3. Click the “+” sign on the right side of each command to call up and add it to the Siri page. The default shortcut name is the name of the list, which can be modified by the user;
4. After the instruction is added to Siri, the Siri voice command is displayed on the second line of the list, and the plus sign on the right side of the list becomes an arrow to the right. The user can click the list option to re-start edit;
5. After the command is successfully added, Siri is invoked, and the user reads the set voice command to perform the corresponding operation.

Alexa app says “Waiting for Blurams”

If the Amazon Alexa can’t play the live stream and says “Waiting for Blurams”, use the below steps to trouble this issue:

1, Please ensure you can play the live stream on Blurams app.

2, Check if your Amazon Alexa app is up to date.

3, Disable, then re-enable the Blurams Skill in the Amazon Alexa App.

Alexa cannot discover or connect to the camera

Here are some steps to try if your Amazon device is having trouble discovering the security camera:

1, Ensure the devices is the newest firmware, click here to see how to update the firmware online.

2, Ensure your Alexa devices’ firmware is also up to date. Click this link to check with Amazon customer support. 

3, Ensure that you authorized the correct Blurams account to your Amazon Alexa account.

4, Disable, and re-enable the Blurams skill.

5, Ensure the device is online and the network is fine.

6, For additional troubleshooting, click here to refer to Amazon Alexa support.

Alexa can’t link to my account

If you can’t link your account to Amazon Alexa blurams skill, please try to do the following things:

1, Please try to log in the blurams app with the same account and password, and make sure the account and password are valid and correct.
2, Please check if the email address and password are correct, and please note if there exists the space character.

IFTTT set up steps

Blurams has partnered with IFTTT (If This Then That) to let our users connect Blurams security cameras and Doorbell to other brand apps and devices.

Blurams security camera and doorbell has a few triggers and actions it can use with IFTTT. Please go to the IFTTT to get more features to build a smart home and living carefree.

1. Download IFTTT

Enter https://ifttt.com/ in the address bar of a browser or download and install the “IFTTT” App from the Apple Store or Google Play.

2. Create Applet

Sign up and log into the IFTTT App, now you’re ready to create an Applet with Blurams service. As an example, we will demonstrate how to use the Blurams service by creating an Applet that “turns on push notification when you leave a place.

There are 3 steps to create an Applet:

2.1 Select “IF”

Select the Location service first, then select “You exit an area” and locate an area on the map.

2.2 Select “Then”

Search and select “Blurams” service, then select the device which you need to enable push-notifications for it. If you have not used Blurams service before, then you need to do an authentication between your Blurams account and IFTTT first.

2.3 Preview and Finish

After finishing the settings above, IFTTT will show a preview page, here you can choose to rename the Applet.

Tap the “Finish” and after the save is successful, this Applet will immediately take effect.

3. Disable Applet

When you don’t need the Applet, you can disconnect the Applet or just archive it in the IFTTT App.

To learn more about Applets click here for support articles by IFTTT.

Disable/ Unlink Google Home

Set up the Google Home/ Google Assistant

1. Download the Google Home app

On your mobile device or tablet, download the Google Home app.

2. Set up your Google device

If you haven’t set up your Chromecast and speaker or display, follow the steps below. If you have already set up these devices, you can skip this step.

3. Link blurams Account

Voice control

Use these commands to control your home security cameras:

Disable or Unlink the Alexa Skill

Click “DISABLE SKILL” on the Skill homepage to disable blurams skill.

Amazon Alexa Voice Commands

After discovering devices, you can control these devices through Amazon Echo series products. Currently, they support voice commands such as：

How to set up Amazon Alexa?

1. Download Amazon Alexa

Download and install the “Amazon Alexa” app on the App Store or Google Play.

2. Find blurams Skill

Log in to the Amazon Alexa app, open the sidebar from the top left corner, and enter the “Skills & Game” page, search for “blurams” in the search bar to find the blurams skills.

3. Enable blurams Skill

In the search result page, click “blurams Skill” and go to the Skill page, click “ENABLE” and follow the instructions to link Amazon to your blurams account.

4. Discover device

If the accounts are successfully linked, the Amazon Alexa App will start to discover devices. After waiting for a moment, all security cameras that have been discovered will be listed automatically.

Notes to keep in mind:

OTA (Over The Air) Firmware Update

Where is the SD card slot?

If you couldn’t find the SD card slot of these devices(Dome Pro, Dome Lite, Dome Lite 2, Snowman), please power off the device, slide up the lens, the SD card slot is on the lens.

I can’t see any videos after inserting the SD card?

The device supports both cloud recording and SD card recording mode. The timeline displays videos that are in the cloud by default. If you need to view the video on the SD card, please switch the viewing way to SD card using one of the following ways:

• Enter the device’s [Preferences] “” -> [Storage] -> [Video viewing ways] and select the SD card.

• Enter the live page, tap the “” button to switch the timeline to the SD card mode.

In addition, you can switch the video recording mode on the SD card through the device’s [Preferences/Settings] “”  -> [Storage] -> [SD card record mode].

The following recording modes are supported:

The home security camera will no longer record video data on the SD card.

The device will record video data to the SD card only when an event is detected.

If the SD card is inserted into the device, the device will record video data to the SD card at all times even when the device is not connected to the network. However, the SD card might be damaged over time if this mode is used for long periods of time as this engages the card continually.

The app can’t detect the SD card

If the cameras can’t detect the SD card, please try to troubleshoot it via the below step:

Password Reset

How to Reset your Password

The option to change your password in the app is only available when signing in using an e-mail and password, not Single Sign-On (SSO).

Requirements to Change Your myQ Account Password

Passwords need to be at least eight (8) characters in length and must contain at least three (3) of the following four (4) character types:

How to Change Your myQ Account Password in the myQ App

Note: If you don’t see this option in your account, you most likely use SSO with Amazon, Apple or Google to login. No password update is necessary, continue logging in with SSO.

How to Change the Password for a myQ Account

The option to change your password in the app is only available when signing in using an e-mail and password, not Single Sign-On (SSO).

Requirements to Change Your myQ Account Password

Passwords need to be at least eight (8) characters in length and must contain at least three (3) of the following four (4) character types:

How to Change Your myQ Account Password in the myQ App

Note: If you don’t see this option in your account, you most likely use SSO with Amazon, Apple or Google to login. No password update is necessary, continue logging in with SSO.

Changing Your myQ Account Password If You Forgot the Password

Note: After changing the password, any mobile device(s) using this email address will need to be updated with the new password in order to access the account.

Changing your password if you are locked out

Email Updates

Follow the steps below to enable or disable notifications using the myQ app.

Note:

Set Up Family & Friends

myQ Users is a feature that allows you to invite up to two (2) Co-Owners and thirteen (13) additional people to access your myQ account on the myQ app.

How to Invite a New myQ User

Note: When choosing from your phone’s contacts using the plus sign (+), you may receive a pop-up requesting permission for myQ to access your contacts. The phone contact must contain an email to be selected.

Note: The invite must be accepted within 7 days.

Inviting Users to Access Your myQ Account

myQ Users is a feature that allows you to invite up to two (2) Co-Owners and thirteen (13) additional people to access your myQ account on the myQ app.

How to Invite a New myQ User

Note: When choosing from your phone’s contacts using the plus sign (+), you may receive a pop-up requesting permission for myQ to access your contacts. The phone contact must contain an email to be selected.

Note: The invite must be accepted within 7 days.

How to Create and Manage myQ Account Notifications

You can set up notifications in the myQ app to know when there is activity on a connected myQ device. Notifications can be sent to your phone or email.

If you choose a specific time for your notification, the notification can’t be scheduled past midnight. For example: If you want the scheduled notification to run from 10:00 pm to 6:00 am, you must create two notifications. One notification to schedule 10:00 PM to 11:59 PM and then another notification to schedule 12:00 AM to 6:00 AM.

How to Create a Notification for a myQ Account

Manage Notifications

Delete Notifications

Notes:

Add a Device to a myQ Account

A myQ device can be a myQ-enabled garage door opener, myQ-enabled gate, a myQ-enabled commercial door opener, or a myQ light control. We have two types of myQ light controls – the Remote Plug-In Light Control and the Remote Light Switch.

To Add a Device Using the myQ App

.

myQ Garage Door Opener (non-Wi-Fi)*

.

Remote Light Control

.

Commercial Door Operator

.

Gate Operator

myQ Error Codes and How to Resolve Them

Below are potential error codes you may encounter when using the myQ app and how to resolve the cause of the error code

.

Device is Offline

If your myQ device appears to be offline and cannot be controlled via the myQ app, there are several things that could be causing this issue to occur, such as:

.

Smart Garage Hub or Smart Garage Control Appear Offline

Check the LED status on your Smart Garage Hub or Smart Garage Control. For more information on the LED status, see Unable to Connect a myQ Device to Home Wi-Fi Network Overview and scroll down.

myQ Garage

myQ Smart Garage Hub

Smart Garage Control

.

Wi-Fi Garage Door Opener

Check the LED status on the Wi-Fi Garage Door Opener by checking the adjustment button in between the up and down arrows on the operator. For more information, see Unable to Connect a Wi-Fi Garage Door Opener to Wi-Fi Overview and scroll down.

.

Error Code 1-1

.

Safety Sensors are Obstructed or Not Connected

Error Description

This error occurs when the garage door opener detects that the safety sensors are blocked, not aligned or have an issue with the wires.

Symptoms of Error

When the garage door begins to close, it reverses to the open position or the garage door does not move and remains in the open position.

.

How to Fix

.

View a Help Video

.

How to Align the Safety Reversing Sensors on Your LiftMaster Garage Door Opener

.

This video demonstrates how to align the safety reversing sensors on your LiftMaster garage door opener.

.

Error Code 1-2

Safety Sensor Wiring Issue

Error Description

Users will encounter Error Code 1-2 when the garage door opener detects that the safety sensor wires are shorted or reversed.

.

Symptoms of Error

The garage door opener will not close, and the opener’s lights will flash or click ten (10) times.

.

How to Fix

Ensure the safety sensors are correctly wired to the operator and that the bare copper is not touching.

.

Error Code 1-3

Door Control Wire Issue

Error Description

Users will experience Error Code 1-3 when the operator detects there is a short in the wires connecting the Wall Control to the garage door opener.

.

Symptoms of Error

The garage door opener works when using the remote controls and keypad, but it does not operate from the wall control panel.

.

How to Fix

This is best fixed by a Dealer. Use myQ Diagnostics in the myQ app, How to Use myQ Diagnostics, or find a Dealer near you by clicking on the link below.

Face Detection*

How do I set up myQ Face Detection?

How do I disable/pause myQ Face Detection?

How do I manage or delete existing myQ Faces?

*Face Detection is supported in the US and CA, excluding the state of Illinois for all devices. It is also excluded in Texas & Washington for all LiftMaster or Chamberlain garage door openers with an integrated camera and the myQ Smart Garage Camera (models myQ-SGC1WLM & myQ-SGC1WCH with serial numbers beginning TC-0001).

If you want to control a Roku streaming player, Roku Streaming Stick®, Roku audio device, or a Roku TV™ with your phone or tablet, learn how to install the Roku mobile app.

What mobile devices work with the smart home app?

The Roku Smart Home app for iOS is compatible with Apple devices running iOS version 14.0 or higher. Visit the App Store® on your Apple device (iPhone, iPad, iPod Touch) or visit the online App Store to download the Roku Smart Home mobile app for iOS.

The Roku Smart Home app for Android is compatible with Android devices running Android version 7.0 or higher. Visit the Google Play™ store on your Android device or visit the online Google Play store to download the Roku Smart Home mobile app for Android.

What can I do with the smart home app?

After each Roku Smart Home device is set up and added to the Roku Smart Home app, you can access it from the Home screen and:

If the app is unable to find your smart camera, doorbell, bulb, plug, light strip, home monitoring accessory get help connecting a Roku Smart Home device.

How to fix Roku Smart Home device offline issues

Your Roku® Smart Home devices are set up, controlled, and configured through the Roku Smart Home mobile app. If the app cannot communicate with a device for some reason, you may be unable to access certain features that can be managed or controlled using the app, e.g., adjust settings on your smart bulb, view a live video stream on your camera, change home monitoring modes, and control your outdoor plug.

You may see a cloud icon with a line through it  or an error message, “Device is offline (error code 90)”.

This article provides instructions for refreshing your device, checking if your device is powered on, fixing connectivity issues, and advanced troubleshooting steps.

How to refresh the connection to your smart home device

If you get an “offline” error when trying to view your smart home camera or doorbell live stream, tap the Refresh  icon.

Restart the app

Restart the smart home app on your mobile device using the following instructions.

How to check if your smart home device is powered on

If you discover one of your smart home devices is offline, first make sure it is powered on. Some smart home devices have a status light to help determine if your device is on. Learn how to find the status light on your device and what the status light means.

If the status light is ON, continue to the next section and use the suggested steps to get your device back online. If the status light is OFF, try troubleshooting power issues with either your cameras and doorbells, or bulbs and light strips.

How to restart your smart home device

Many issues can be resolved by restarting your smart home device and then trying to perform the action again. Follow the steps below to physically restart your smart home device.

Restart your smart camera

Find the instructions applicable to your specific Roku smart home camera from the list below:

Roku Indoor/Outdoor Wired Camera SE.

Roku Outdoor Camera SE

Roku Floodlight Camera SE

Restart your home monitoring system

Use the following steps to restart your Roku Monitoring Hub or Roku Home Monitoring Accessories.

Roku Monitoring Hub: Hold the Reset button, located on the back of the hub, for 8 seconds and then release the button.

Roku Home Monitoring Accessories: Remove the batteries from the home monitoring accessory and then reinsert the batteries.

Restart your video doorbell

Use the following steps to restart your Roku Video Doorbell & Chime SE or Roku Wire-free Video Doorbell & Chime SE

Wired doorbell installation:

Wireless doorbell installation:

Restart your smart bulb

If you are restarting a Roku Smart Bulb SE (Color) or Roku Smart Bulb SE (White), turn off the bulb manually with the light switch and then turn it back on.

Restart your smart light strip

If you are restarting a Roku Smart Light Strip SE or Roku Smart Light Strip+ SE, unplug the light strip from the power source and then plug it back in.

Restart your smart plug

If you are restarting a Roku Indoor Smart Plug SE or Roku Outdoor Smart Plug SE, unplug the smart plug from the power source and then plug it back in.

How to fix connectivity issues

Connectivity issues can be caused by internet outages, weak signals, and out of date software.

Troubleshoot your internet connection

If your smart home device uses a wired Ethernet connection, verify the Ethernet cable is firmly connected.

If your smart home device connects to your wireless network, check the Wi-Fi connection using the suggestions below.

• Check your internet connection. Open a web browser on your mobile device and visit a public website such as www.roku.com. If this fails, check with your internet service provider (ISP) to inquire about an outage, or contact them directly. If they are not aware of an outage, try restarting and then resetting your Wi-Fi router* and modem.

• Test your Wi-Fi range. Use the following steps to check your smart home device’s signal quality in the smart home app. If your device has no bars or one bar, try moving or mounting your it closer to your router.

◦

1.Tap Home  from the navigation bar

2.Select your device

3.Tap Settings  in the corner

4.Select Device info

5.Check the three bars  to see signal quality

• Update Wi-Fi settings. If you recently moved, upgraded any network equipment, or changed the network name and/or password, you likely need to update the Wi-Fi settings for your smart home device.

Check the app for updates

Make sure the app is running the latest version by visiting your app store.

Advanced troubleshooting steps

If you were not able to resolve your issue from the information in the previous sections, the general suggestions below are known to solve various issues.

Set up your device again

You do not need to remove your smart home device from the mobile app to set it up again. Simply follow the steps below and see if that resolves your issue.

1.Open the Home  screen

2.Tap the plus sign  from the navigation bar

3.Select Add device

4.Select your device category and then select a device

5.Follow the on-screen instructions

If you need help completing the setup process, refer to the appropriate setup article on the smart home devices category page.

Reset your device

If setting up your smart home device again did not resolve the issue, you can factory reset it and then set it up again. This should be a last resort for troubleshooting purposes since it removes all preferences and settings. For help, learn how to reset your smart home device.

If it is difficult to access your smart home device to perform a reset, delete it from the smart home app instead.

1.Open the Home screen

2.Select your device

3.Tap Settings 

4.Scroll to the bottom of the page and tap Delete device

After your device is reset or deleted from the app, visit the smart home devices category page and open the appropriate article to help you set up your device again.

*A note on terminology:

To access your network and ultimately the internet, you will typically connect to a device called a router but it may also be referred to as a wireless router, wireless access point, home gateway or cable modem. In some cases, your internet service provider (ISP) may have provided you with a single integrated device that includes a cable modem and a router, or you may have purchased a stand-alone router from a company such as Linksys, NETGEAR, ASUS, Belkin or D-Link.

In this article, the term router is used as a generic term to refer to the network device that your Roku device must connect to access the internet. For more information refer to the documentation provided by your ISP or router manufacturer.

Why is my Roku Smart Home device not connecting to the app during setup?

You will need to connect your Roku® Smart Home device to the internet during the initial set up process. All smart home devices support a 2.4 GHz Wi-Fi® connection and some devices, such as the Roku Home Monitoring System SE, also support a wired Ethernet connection. The Roku Smart Home mobile app shares settings from your phone or tablet over a secure wireless connection. To help make the initial connection, some Roku Smart Home devices need to scan a QR code generated by the mobile app while others use Bluetooth®.

You may see an error like “Connection failed”, “Hub not found”, “No lights found”, or “No plugs found” in the mobile app.

This article describes provides instructions for fixing connection issues.

How to fix the connection

Before you look at the suggestions below, check that your smart home camera, home monitoring hub, doorbell, bulb, plug, or light strip is powered on and if the device has a status light, check that it is working as described in the smart home app. If the status light does not match the description in the app, the smart home device cannot be connected.

Additional troubleshooting steps

If the troubleshooting tips above did not help and the smart home app is still unable to find your smart home device, try the following suggestions.

Restart the smart home app

Restart the app by doing one of the following:

How to restart your smart home device

Many issues can be resolved by restarting your smart home device and then trying to perform the action again. Follow the steps below to restart your smart home device in the Roku Smart Home mobile app. If your device does not have a restart option in the app, alternate instructions are also provided.

Restart your smart camera

Use the following steps to restart your smart home camera in the app.

1.Tap Home  from the navigation bar

2.Select your device

3.Tap Settings  in the corner

4.Scroll down and tap Restart or Restart Camera

If you are restarting a Roku Outdoor Camera SE, use the following steps instead:

Restart your home monitoring system

Use the following steps to restart your Roku Monitoring Hub or Roku Home Monitoring Accessories.

Roku Monitoring Hub: Hold the Reset button, located on the back of the hub, for 8 seconds and then release the button.

Roku Home Monitoring Accessories: Remove the batteries from the home monitoring accessory and then reinsert the batteries.

Restart your video doorbell

Use the following steps to restart your Roku Video Doorbell & Chime SE or Roku Wire-free Video Doorbell & Chime SE

Wired doorbell installation:

Wireless doorbell installation:

Restart your smart bulb

If you are restarting a Roku Smart Bulb SE (Color) or Roku Smart Bulb SE (White), turn off the bulb manually with the light switch and then turn it back on.

Restart your smart light strip

If you are restarting a Roku Smart Light Strip SE or Roku Smart Light Strip+ SE, unplug the light strip from the power source and then plug it back in.

Restart your smart plug

If you are restarting a Roku Indoor Smart Plug SE or Roku Outdoor Smart Plug SE, unplug the smart plug from the power source and then plug it back in.

*A note on terminology:

To access your network and ultimately the internet, you will typically connect to a device called a router but it may also be referred to as a wireless router, wireless access point, home gateway or cable modem. In some cases, your internet service provider (ISP) may have provided you with a single integrated device that includes a cable modem and a router, or you may have purchased a stand-alone router from a company such as Linksys, NETGEAR, ASUS, Belkin or D-Link. In this article, the term router is used as a generic term to refer to the network device that your Roku device must connect to access the internet. For more information refer to the documentation provided by your ISP or router manufacturer.

Why can I not change device settings in the Roku Smart Home app?

All of the settings on your Roku® Smart Home device are controlled in the Roku Smart Home mobile app. Issues updating your settings can be caused by problems with your smart home device or your mobile device. This article will help guide you through troubleshooting both devices.

How to change smart home settings

Many features of the Roku Smart Home devices, such as rules, event recordings, and detection settings, are managed in the Settings menu. Additional articles about different settings can be found under the Roku Smart Home category.

You can make changes to your device Settings in the app with the following steps:

1.Tap Home  from the navigation bar

2.Select your device

3.Tap Settings  in the corner

4.Make your changes

5.Tap the Back arrow to return to the device

After making changes, tap Settings  again and check to verify your settings were saved.

How to troubleshoot your smart home device

Use the following steps to check that your smart home device is powered on, connected to the internet, and up to date.

Check that your device is powered on

If you cannot control your smart home device in the smart home app, check if the device is powered on. All smart home devices, except the Roku Smart Bulb SE (Color) and Roku Smart Bulb SE (White), have a status light. If the status light is off, your device is powered off.

If the device is OFF, refer to the other articles on troubleshooting power issues with cameras and doorbells, or bulbs and light strips. If the device is ON, continue for instructions on troubleshooting an offline device.

Check that your device is online

Roku Smart Home devices are set up, controlled, and configured through the Roku Smart Home app. If the app cannot communicate with a device for some reason, you may not be able to adjust settings on your smart bulb, view a live video stream on your camera, or control your outdoor plug.

If your smart home device is offline or you receive error message “Device is offline (error code 90)”, refer to the other article for troubleshooting connection issues.

Check your device for software updates

You can use the smart home app to manually check for a software update on a specific smart home camera, video doorbell, plug, bulb, or light strip, or you can check all your smart home devices at once. Learn how to update your device software.

How to restart your smart home device

Many issues can be resolved by restarting your smart home device and then trying to perform the action again. Follow the steps below to restart your smart home device in the Roku Smart Home mobile app. If your device does not have a restart option in the app, alternate instructions are also provided.

Restart your smart camera

Use the following steps to restart your smart home camera in the app.

1.Tap Home  from the navigation bar

2.Select your device

3.Tap Settings  in the corner

4.Scroll down and tap Restart or Restart Camera

If you are restarting a Roku Outdoor Camera SE, use the following steps instead:

Restart your home monitoring system

Use the following steps to restart your Roku Monitoring Hub or Roku Home Monitoring Accessories.

Roku Monitoring Hub: Hold the Reset button, located on the back of the hub, for 8 seconds and then release the button.

Roku Home Monitoring Accessories: Remove the batteries from the home monitoring accessory and then reinsert the batteries.

Restart your video doorbell

Use the following steps to restart your Roku Video Doorbell & Chime SE or Roku Wire-free Video Doorbell & Chime SE

Wired doorbell installation:

Wireless doorbell installation:

Restart your smart bulb

If you are restarting a Roku Smart Bulb SE (Color) or Roku Smart Bulb SE (White), turn off the bulb manually with the light switch and then turn it back on.

Restart your smart light strip

If you are restarting a Roku Smart Light Strip SE or Roku Smart Light Strip+ SE, unplug the light strip from the power source and then plug it back in.

Restart your smart plug

If you are restarting a Roku Indoor Smart Plug SE or Roku Outdoor Smart Plug SE, unplug the smart plug from the power source and then plug it back in.

How to troubleshoot your mobile device

After ruling out issues with your smart home device, it is time to troubleshoot the mobile device you are using to change settings. A low quality internet connection, low power mode, or out of date app on your mobile device can all contribute to issues saving settings.

Check your mobile device connection

Your mobile device does not need to be on the same Wi-Fi® network as your smart home device to change settings, but both devices need to be connected to the internet and able to reach the Roku cloud. Connect your mobile device to another Wi-Fi network, if available, or turn off your Wi-Fi connection and use mobile data, if you have service, and try to change settings.

Check your mobile device power mode

If your mobile device is in battery saver, low power, or power saving mode this might restrict your wireless settings and cause issues pushing updates to your smart home device.

Refer to the Apple or Google support websites for assistance checking the power mode on your mobile device.

Check the smart home app for updates

Make sure the app is running the latest version by visiting the appropriate app store.

Use another mobile device

If you have another smartphone or tablet available, try using the Roku smart home app on that device to change your settings.

Advanced troubleshooting steps

If you were not able to resolve your issue from the information in the previous sections, the general suggestions below are known to solve various issues.

Set up your device again

You do not need to remove your smart home device from the mobile app to set it up again. Simply follow the steps below and see if that resolves your issue.

1.Open the Home  screen

2.Tap the plus sign  from the navigation bar

3.Select Add device

4.Select your device category and then select a device

5.Follow the on-screen instructions

If you need help completing the setup process, refer to the appropriate setup article on the smart home devices category page.

Reset your device

If setting up your smart home device again did not resolve the issue, you can factory reset it and then set it up again. This should be a last resort for troubleshooting purposes since it removes all preferences and settings. For help, learn how to reset your smart home device.

If it is difficult to access your smart home device to perform a reset, delete it from the smart home app instead.

1.Open the Home screen

2.Select your device

3.Tap Settings 

4.Scroll to the bottom of the page and tap Delete device

After your device is reset or deleted from the app, visit the smart home devices category page and open the appropriate article to help you set up your device again.

How to fix error “The app isn’t compatible with your device” in the Roku Smart Home mobile app

If you receive error “The app isn’t compatible with your device” in the Roku Smart Home mobile app, the app may not work because your phone or tablet is jailbroken, rooted, or running uncertified software.

This article provides troubleshooting instructions for Roku Smart Home app compatibility issues on Google Android™ and Apple iOS® phones and tablets.

How to fix Roku Smart Home app compatibility issues

Review the troubleshooting tips below to fix app compatibility issues on your Android or iOS device.

App compatibility issues on Android

If your Android phone or tablet is rooted, running uncertified software, or not Play Protect certified then it may not be compatible with the Roku Smart Home mobile app. Refer to the Google Play Help article for instructions on how to check your Play Protect certification status.

If your device is not Play Protect certified or you are using an older device that does not have the option to check certification status, get further help from Google Android support or the Android Help Community.

App compatibility issues on iOS

The Roku Smart Home mobile app requires iOS 14.0 or newer. If your iOS phone or tablet is running an older version or jailbroken, it may not be compatible with Roku Smart Home mobile app. Contact Apple support for further advice and guidance.

How to unlink a Roku Smart Home device from your Roku account

Unlinking a Roku® Smart Home device in the Roku Smart Home mobile app is the preferred way to remove a smart home device from your Roku account. After unlinking your smart home device, you can also perform a factory reset to restore the device to factory default settings and ensure all data is erased. Unlinking your smart home device without performing a factory reset may leave Wi-Fi® data on the device until it is linked to a new account. If a factory reset was already performed, you can still follow the steps in this article to remove the smart home device from your account.

For help with Roku streaming devices, learn how to remove a streaming device from your Roku account.

Unlink your smart home device

You can unlink your smart home device in the Roku Smart Home mobile app from either the Home screen or your device’s Settings screen. Once your smart home device is unlinked from your Roku account, you can perform a factory reset.

Unlink on the Home screen

Use the following instructions to unlink your smart home device from the Home screen.

1.On the Home screen, tap the Pencil 

2.Select Edit Devices

3.Tap Minus  next to the device you want to remove

4.Tap Delete to confirm your selection

Unlink on the Settings screen

Use the following instructions to unlink your smart home device from the device’s Settings screen.

1.On the Home screen, select your smart home device

2.Tap Settings 

3.Scroll down and tap Delete device

4.Tap Delete or Yes to confirm your selection

How to manage, enable, or disable Roku Smart Home notifications

Your Roku® Smart Home camera or doorbell automatically notifies you through the Roku Smart Home app when sound or motion is detected. When you set up your Roku Smart Home camera or video doorbell for the first time, Roku gives you a 14-day free trial of a Roku Smart Home Subscription. During your trial, take advantage of smart detection and see how it intelligently differentiates between people, packages, pets, and cars when motion is detected. Customers who select to only be notified when a person is detected see about a 70% decrease in notifications.

If your home is crowded for a family gathering or there is loud construction on your street, you may receive more notifications than you would like. This article explains what to do to reduce unwanted notifications.

Choose the right location

Proper placement of your device reduces how many notifications you receive.

Adjust detection settings

If you are getting too many unwanted notifications, follow the tips below to reduce your number of notifications.

Adjust detection settings

Lower the motion and sound detection sensitivity of your device to reduce notifications.

1.Open your device from the Home screen and tap Settings  in the top-right corner

2.Select Detection settings

3.Lower your Motion Detection Sensitivity and Sound Detection Sensitivity by moving the slider to the left

Set detection zone

A detection zone allows you to create a specific area where you want your device to detect motion. Any motion events outside of this area are ignored.

1.Open your device from the Home screen and tap Settings  in the top-right corner

2.Select Detection settings

3.Tap Detection zone

4.Touch and drag your finger on the grid space to create a detection zone

Adjust notification settings

Turn off motion or sound notifications

Choose to not be notified if motion or sound is detected. If you live in a noisy area, you may want to only receive notifications if motion is detected. Your Roku Outdoor Camera SE and Roku Video Doorbell SE only offers notifications when sound is detected.

1.Open your device from the Home screen and tap Settings  in the top-right corner

2.Select Notifications

3.Toggle Motion events or Sound events to the left to turn off motion or sound notifications

Turn off all notifications

To turn off all notifications for your camera or doorbell, follow the steps below.

1.Open your device from the Home screen and tap Settings  in the top-right corner

2.Select Notifications

3.Toggle Send notifications to the left to turn off all notifications

Adjust settings on your TV

Learn how to manage notification settings in the Roku Cameras App if you want to change the smart home notifications you receive on your TV.

Purchase a smart home subscription

As a part of a Roku Smart Home Subscription, you get smart detection, which specifically notifies you if people, packages, pets, and cars are detected moving. Smart detection lets you reduce your notifications giving you a better idea of what is happening in and around your home when motion is detected. Without a subscription, you get notifications for any motion or sound event, but with smart detection, you can pick and choose exactly what motion events to be notified about. Only get notified when you want to keep an eye on your pet or when you want to see if a package arrived.

How to enable two-factor verification on the Roku Smart Home app

Two-step verification is a feature available in the Roku® Smart Home app that adds an extra layer of security to protect your account and smart home devices from unauthorized access. You will be prompted to provide a one-time use verification code each time you sign in to the smart home app. You can receive the code through SMS text.

What is two-step verification?

Two-step verification, also known as two-factor authentication (2FA) or multi-factor authentication (MFA), is a method of securing your account with a one-time use verification code. If two-step verification is enabled on your account, you must complete the verification each time you sign in to the smart home app. The code is sent to your verified phone number and is only valid for ten minutes. You can only have one verification phone number on your account and it must be a U.S. number.

How to enable two-step verification

You will be prompted to enable two-step verification when you create an account in the Roku Smart Home app or the first time you sign in with an existing Roku account that does not have it enabled.

How to change two-step verification settings

If you want to use a different phone number, you must turn off two-step verification and then re-enable it using the new number.

Use the following steps to turn off two-step verification while signed in to the app.

You will then be prompted by the app to add a new phone number for two-step verification.

How to recover an account

For security purposes, Roku is unable to make modifications to your two-step verification settings. If you lose access to your verification phone number, you can use your email address for two-step verification. If you do not know your password, you can perform a password reset.

Perform the following steps to recover your account.

Once you are signed in to your smart home account, follow the steps in the “How to change two-step verification settings” section.

If you do not have access to your verification phone number and email address, you will need to factory reset your devices and create a new account.

Troubleshooting two-step verification

If you are experiencing issues completing the two-step verification prompt, try the following troubleshooting steps.