.

Table of Contents

.

Introduction to Axis Cameras

Axis Communications is a leading manufacturer in the network camera industry, known for its innovative and high-quality surveillance solutions. Axis cameras are widely used in various applications, including commercial security, public safety, and private surveillance. Their advanced technology, reliability, and versatility make them a popular choice for both professional and personal use.

.

Choosing the Right Axis Camera

Selecting the appropriate Axis camera for your needs involves considering several factors:

Popular Axis Camera Models:

.

Unboxing Your Axis Camera

When you receive your Axis camera, carefully unbox it and ensure all components are present. Typically, the package includes:

Check for any physical damage and verify that all parts are included as per the manufacturer’s list.

.

Preparing for Installation

Before starting the installation, gather the necessary tools and plan the setup:

.

Physical Installation of Axis Camera

Follow these steps to mount your Axis camera:

.

Network Configuration

Configuring the network settings is crucial for accessing and controlling your Axis camera:

.

Accessing the Camera Interface

To access the Axis camera interface:

.

Firmware Update

Keeping your camera’s firmware up to date ensures optimal performance and security:

.

Basic Camera Settings

Adjust the fundamental settings to optimize camera performance:

.

Advanced Camera Settings

Explore the advanced settings to enhance your surveillance capabilities:

.

Setting Up Remote Access

Remote access allows you to monitor your camera from anywhere:

.

Integration with Other Systems

Axis cameras can be integrated with various systems for enhanced functionality:

.

User Management

Manage user access and permissions to ensure secure operation:

.

Recording and Storage Options

Choose the best storage solution for your recordings:

.

Monitoring and Playback

Efficiently monitor live feeds and playback recorded footage:

.

Troubleshooting Common Issues

Address common problems to ensure continuous surveillance:

.

Security Best Practices

Implement security measures to protect your camera system:

.

Maintenance and Care

Regular maintenance ensures the longevity of your camera:

.

Frequently Asked Questions

How do I reset my Axis camera to factory settings?

What is PoE and how does it work with Axis cameras?

Can I use third-party software with Axis cameras?

How do I access my Axis camera remotely?

What should I do if my camera’s image quality is poor?

Are Axis cameras suitable for outdoor use?

.

Conclusion

Axis cameras provide robust and versatile surveillance solutions for various applications. By following this detailed setup and user guide, you can ensure seamless installation, optimal performance, and enhanced security for your premises. Remember to regularly update your camera’s firmware and follow best practices for maintenance and security to get the most out of your Axis camera system.

.

The new WiseDetector allows you to train compatible AI cameras to recognize and detect specific objects per your specific needs.

The download includes any pre-requisite Microsoft software needed for Wisenet Device Manager (NET Framework 4.7.2, Microsoft Visual C++ 2010 Redistributable Package (x86)), usually already installed on modern PCs.

WiseDetector requires the following pre-requisites:

To learn more about upgrading device firmware, view this video.

Wisenet Device Manager – Forcing device manager to search a specific network connection

Wisenet Device Manager (version 2.1.x or higher) can be configured to search a specific network connection when running a network scan.

Your available networks are displayed in the lower-left-hand corner of the Wisenet Application Window (pictured below)

To Specify a network follow the below steps.

1. Highlight and right-click on the Preferred Network Connection to access the Enable Box. Left-click this box to select and enable the network where the scan will be performed

2. An asterisk will appear next to the network you have selected

3. Press the Search Button, which will provide search results only from that network

Submitting CGI Commands in Wisenet Device Manager

Summary:

Wisenet Device Manager has a built in tool called “CGI Sender”.  (Figure 1)  This tool can be used to send CGI commands to our cameras and is very useful in case a command needs to be sent to multiple cameras (or a batch of cameras) at the same time instead of going to each camera to adjust the individual setting.

Figure 1

Where can you obtain a list of CGI commands?

As a Hanwha Step Partner you can download the CGI manuals from the Step Partner Website.  If you do not have a login, you will need to enroll to become a member.

Step by Step Example:

The following steps will show you how to change the PTZ setting “Focus -> Lens Reset” from its default setting “1 day” to “Manual“.  This, in effect, will stop the PTZ camera from automatically resetting the focus daily.

By default, our PTZ Cameras have “Focus > Lens Reset” enabled to 1 day.

This is enabled by default to ensure that the camera focus is properly calibrated and does not deviate from its factory calibrated values.  To check the current setting, in the camera’s Web UI, navigate to

Settings -> Video and Audio -> Camera Setup -> Focus / Lens Reset  (Figure 2)

Figure 2

The CGI command to change the lens reset schedule was taken from the SUNAPI_image_2.6.3 document. (Figure 3)

Figure 3

To change the preset to manual we will use the base CGI command stw-cgi/image.cgi?msubmenu and we will add the lens reset schedule =focus&action=set&LensResetSchedule=Manual

The complete string should be like this:

stw-cgi/image.cgi?msubmenu=focus&action=set&LensResetSchedule=Manual

Open Wisenet Device Manager, highlight all the cameras that you need to send the CGI command to and select 

“CGI Sender“

Enter CGI command:

stw-cgi/image.cgi?msubmenu=focus&action=set&LensResetSchedule=Manual  Click apply. (Figure 4)

Figure 34

The CGI Sender should show “Success” if the CGI command was successfully sent to the cameras (Figure 5)

Figure 5

To verify that the setting in the cameras changed, follow these steps:

Login to the camera’s Web UI, check if the lens reset changed to “Manual“: (Figure 6)

Figure 6

NOTE: If you have access to other API’s, you can use those with CGI
Sender as well. This article is simply an example of what you can
accomplish with CGI Sender in Wisenet Device Manager.

How To Collect Camera Debug Logs via Wisenet Device Manager

Summary:

If you are experiencing issues with your cameras, it is helpful to supply logs to Tech Support for troubleshooting purposes.  This document explains how to gather camera debug and dying logs using Wisenet Device Manager.

Step By Step Guide:

Open Wisenet Device Manager.

Select the cameras you wish to collect logs from, they must have a status of Login OK (Figure 1) 

Figure 1

Once selected, go to the menu bar and select System/Trouble Shooting/Debug Log (Figure 2)

Figure 2

Another window will open with the selected cameras listed.  There is a File Download field where you will enter the path to where you want to save the logs by selecting the three dots on the side.  (Figure 3)

Figure 3

Next, choose start. (Figure 4)  Duplicate the issue the unit is having.

Figure 4

Once the issue has been duplicated and you want to retrieve the logs, select Stop.  (Figure 5)

Figure 5

This will save the logs in the location you chose in Figure 3.  You will see Complete under the Status column.  (Figure 6) Once the logs have been created, please supply them to Support via your open ticket.

Figure 6

How do I change or set the IP and password of multiple devices using Wisenet Device Manager?

Wisenet Device Manager Guide

Summary:

This article will walk you through assigning IPs and passwords to multiple devices at one time via Wisenet Device Manager.

NOTE: When two or more cameras, encoders, decoders, etc., are on the same IP address,
you will not be able to register them into an NVR; you also will not be able to
log in via a web browser.

Step By Step Guide:

1. Download Wisenet Device Manager and its manual from >Here<

2. Install Wisenet Device Manager

3. Make sure your PC’s network card has an IP address assigned to it

4. Click the Search button in the upper-left part of the screen (Figure 1)

NOTE: If search returns no results, try using the article >Here< to diagnose
the search issues

Figure 1

5. The devices found will appear in the device list (Figure 2)

6. Device statuses:

Figure 2

7. Click Ctrl+A to select all of the devices at once, they will become highlighted (Figure 3)

8. The Status column may say Need PW (Figure 3)

Figure 3

9. Click on Credential (Figure 4)

Figure 4

10. Enter your Password, and Confirm your Password (Figure 5)

11. Click Apply (Figure 5)

Figure 5

12. The Result column should say Success (Figure 6)

Figure 6

13. With the cameras selected, click IP Assign (Figure 7)

Figure 7

14. When there are multiple cameras selected, you put in the starting IP (Figure 8)

15. Click Simulate (Figure 9)

Figure 9

16. Click Apply (Figure 10)

17. The Result column should say Success (Figure 10)

Figure 10

How do I Configure DDNS for Wisenet Mobile?

Summary:

Below are the steps required to configure Wisenet Mobile-DDNS.  This assumes that the recorder is properly connected to the network and has the relevant ports forwarded in the router.

Note: For best cyber secrity, many Hanwha recorders support P2P, which is a secure method of access without the need for port forwarding.

Step By Step Guide:

1. On the DDNS ID field enter the Product ID or Host Name.

2. Enter the device credentials

3. Select the devices to be viewed or monitored.

Wisenet Device Manager – Password Policy Change October 2019

Why is Wisenet Device Manager unable to discover cameras?

Summary:

The Wisenet Device Manager is a program used to manage multiple IP network devices; it discovers any Hanwha cameras, encoders, decoders, intercoms, DVRs, or embedded NVRs on your network and easily allows you to modify their IP address. 

Explanation of Behavior:

Figure 1

Step By Step Guide:

1. Open the Wisenet Device Manager application

NOTE: You can download the latest version, and its manual >Here<

2. In the lower left-hand corner, you will see Network Status (Figure 1)

3. Right-click on the network you wish to search (Figure 1)

4. If there are multiple networks on your PC, right-click on the network you want to scan and left-click Enable (Figure 2)

Figure 2

5. Click  the  button

Wisenet Device Manager – Missing Device/Network Tree

The Wisenet Device Manager v2.00 interface has changed from the 1.xx version, and removes the tree on the left side.  This tree showed device selection/filter, bookmarks, and network card/IP address selection.

To regain this function for version 2.00, follow the instructions below.  You can also upgrade to version 2.01, as shown at the bottom and use the Advanced button.

Version 2.0.1 now has an advanced button, which toggles the tree, as shown below.  You can use the Online Updater to easily update to the latest version, or simply download the latest version from our website.

How to install and use Camera Live on a compatible Windows or Mac PC/laptop

Camera Live is a free program for you Windows PC or Mac that can be used to locate its local IP address and to view the camera’s live feed locally and remotely. 

First download the appropriate installation file from the links below and install the program.

For a Windows PC click here

For a Mac click here

Once you have installed the program, open it and click on Add Video. Then click on Discover to find the cameras UID, or enter it manually ensuring it is correct and all in uppercase. Enter the cameras password ensuring this is correct and in the correct case. Then give the camera a name e.g. garden, drive etc. and click on OK.

Once added wait for the camera to connect to the program. When it is connected you will see a green icon next to the UID, you can then view your camera’s live feed by clicking on the play icon. You will see the “No Video” message until you have viewed the live feed for the first time and the program can produce a thumbnail image from this.

.

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Having touble setting up your camera to record to SD card/NVR/NAS drive.

Are you looking to setup recording? If so please see the links below for full setup guides for each recording method. If you have already set it up but have encountered an issue it may be worthwile running through the setup once more, to check for any errors or mistakes.

SD card recording

UCAM NVR recording

NAS Drive recording

If you are still seeing an error or it is not working as expected please take a look at the common issues and their solutions in the list below.

.

SD card not supported or faulty.

Motion detection page not configured correctly

NAS details not entered accurately.

NVR IP address may have changed.

Incorrect Task Management setup

How can I transfer video clips from an SD card in the camera to my computer?

If you are looking to transfer recordings from an SD card installed in the camera to you computer over WiFi this is limited to one file at a time for practical reasons:

.

1) If your SD card had, for example, 128GB of clips it would not only be very cumbersome to transfer that quantity to your computer over your local WiFi but potentially slow down your local network too. As SD cards have very limited file speeds transferring this magnitude of data may also take a very long time to offload.

.

2) It is also impractical or unwise to transfer en masse as it would also cause a slow down of the camera’s capabilities for the time while the transfer is progressing, and your camera could miss key motion events from being recorded.

.

Solutions? There are a number of options available to you:

.

– You can browse the recordings stored on your camera directly from a web browser and check which recordings are important to keep. You can play back the clips in your browser without needing to download to your computer first. Click here for a guide on how to do this.

.

– You can set the sd card to auto overwrite so that it automatically deletes the oldest recordings when the card is full, so you don’t have manually delete.

.

– You can use a number of tasks in the camera to automatically offload clips from the sd card (before they get overwritten) to Dropbox, your own FTP server, etc.

.

– If you really must download everything off the SD card the easiest and quickest way is to take the sd card out and insert directly into your computer (if it supports SD media) and then simply drag and drop the files off the card to your computer.

.

These are but a few suggestions. If you need further advice on the full range of recording and playback options do get in touch with our Support Team and they will be delighted to help.

Cannot connect to the camera remotely using the app.

Are you having trouble connecting to the camera using the app on your phone? This may be a p2p error. The camera and app use p2p to connect, if the camera is unable to connect to the p2p server then it will not be viewable via the app. Click here to check and resolve this.

.

Has the camera been set to a static IP? We do not recommend setting the camera to a static IP as this is not usually required and can render the camera inaccessible if setup incorrectly. Click here to check this has been setup correctly. 

.

Is the UID correct and all in uppercase? If any character in the cameras UID is not in uppercase it will not be able to connect to the app remotely. If this is the case, delete the camera from the app and add it again. For help with this click here for an Android device and click here for an iOS device.

Changed WiFi router or given a new router by your ISP?

If for some reason you have changed/updated your WiFi router your camera(s) will need to be reset to factory defaults and setup again, since the WiFi details and ip addressing on your camera(s) will still be that of your old router.

To reset your camera(s) and start afresh please click here.

NB: Be sure to read and follow the reset instructions carefully to avoid any problems or delay in setup.

.

Once reset you will need to setup the WiFi connection again. Please follow one of the guides below to complete this.

PC Method

App Method

.

WPS Method, for WPS enabled routers.

Power LED flashing rapidly and camera offline?

A rapidly flashing green power LED usually indicates that the camera’s firmware has encountered an error. This is rare but can occasionally happen after an unexpected power cut (if the camera is in the middle of performing a task), due to incorrect settings in the camera (too many enabled tasks, conflicting settings etc.), or due to a faulty SD card. 

This can usually be resolved with a reset of the camera. To do this first power down the camera and leave it for at least 10-15 minutes, then follow the steps on the page linked below to reset the camera. Note: a reset will clear all changed settings in the camera and revert it back to the defaults.

How to reset the camera

If the reset does not clear the error then you should get in touch with our support team using the “contact us” form as they will be able to advise on the next steps to resolve the issue.

How to install and use Camera Live V1

How to reset a camera.

If you think you need to reset your camera we recommend you first get in touch with us using the “Contact us” form as a reset may not solve your issue and will wipe the camera of any user data, meaning you will need to set the camera up again.

But should you want to reset your camera anyway please use either of the guides below.

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

.

There are two ways to reset the camera: physically by pressing the hardware reset button or digitally via the camera’s web interface….

.

Physical reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.

5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.
For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paper-clip or similar.
9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

Digital reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.

8) log in to the camera interface on a PC, see the guide here on how to do this.

9) Go to Setting, Tools, Backup or Reset.
10) Click on Reset, then when it appears click on Reboot.
10) Wait 5 mins for the camera to power up fully, ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is admin (in lower case) for both.

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new. You’ll find the details here: http://ucam247.helpsite.io/categories/3646-camera-setup

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Camera is rebooting often

Do you find the camera does not remain online for any length of time? If so this is usually a setup or a hardware error, typically with the SD card or the recording setup. Please take a look at the troubleshooting guides below to help resolve your issues.

.

SD card not working.

Too many tasks enabled.

Issues with power supply, outdoor cameras.

Cannot view the video from the app.

If you are having trouble viewing video in the app it is likely due to one of the issues listed below. 

Poor Wifi connectivity

p2p disabled

Privacy mode enabled blocking access to the live feed.

Live feed or playback is jerky and not smooth

The first thing to check will be that the camera has a strong WiFi connection. This can be checked in the app by going to Edit Camera, Advanced Setting, WiFi Setting and should be at least 50-60%. A poor WiFi signal can cause the playback of the live feed to be poor. Click here for advice if the WiFi signal strength is poor.

.

If the WiFi connection is strong, the next thing to check will be that the stream setup is set appropriately for your network. The defaults for this are below and can be found by logging in to the camera’s web interface and going to Setting, Camera, Stream Setup.

.

The H.264 bitrate should be left at the default of 1536, raising this can cause the camera to send more data than your router can cope with causing a jerky live stream.

The MJPEG stream should not be set higher than the default of 50. This is an uncompressed stream that is used for the cameras motion detection, not for recording or streaming, raising this can cause issues with the streaming as it puts a high load on the camera.

.

You should also check that you do not have too many tasks enabled, conflicting tasks can cause issues with the camera’s ability to stream well. You should only have one of task 7, 8, 9 or 10 enabled at any one time. For more information on setting up the task management page click here.

NVR IP address keeps changing.

You have setup and NVR with a camera successfully however it stops recording after a short time.

This may be due to your router assigning the NVR a new IP address very often. In this case the best way to prevent this from changing and your details in the Storage Setup page becoming incorrect is by setting the NVR to a static IP address.

To do this please take a look at our setup guide for Setting the NVR to a Static IP address.

Having Trouble With WiFi setup?

Does your WiFi use older WEP Encryption? If so click here

.

Not getting a wireless connection where you have placed your camera? Click Here for more information.

.

Why add cameras to an NVR?​

.

Before you start…​

Before anything, to be able to add your IP cameras, you need to make sure that:
.

.

How to connect an IP camera to a Hikvision NVR 5

How to add your cameras using the V5 GUI…​

Step 1:​

Open a web browser and enter the IP address of your NVR in the address bar. If you are not sure what this is, use the SADP tool to find it.​

Step 2:​

Log in to the NVR using the “admin” username and password you have set on it.​

Step 3:​

Go to: Device Access > Device Configuration > PoE Settings​

​

If you are connecting your camera via the Plug-and-Play method, then make sure that Network Camera Plug-and-Play is enabled on the POE port you will be connecting the camera to on this page.​

​

For any camera with a cable run under 100m, leave the Network Cable Distance as Short Distance.​

​

If you are connecting your camera manually by IP address, disable the Network Camera Plug-and-Play option for the channel that you plan to add the camera to.​

Step 4:​

Go to: Device Access > Device > Video Device​

​

For any Plug-and-Play camera, just make sure that it is in its inactive default state and then connect it to the port you reserved in step 3. After 20 seconds or so, the camera Status should turn to Connecting and then Online (you may need to click on Refresh to see this).​

​

For Manually added cameras, if you can see the camera in the List of Online Devices section, then just tick the box for the camera and then click + Add to Device List, which will then automatically add it to one of the channels you disabled Plug-and-Play on in the last step.​

Alternatively…​

Click on +Add at the top of the page and fill out the fields as follows:​

​

IP Address: Enter the IP address of your camera, using the ‘Test’ button to verify there is a camera at that address. ​

Device Name: This can be anything you like, as it is the name the camera will show with on your NVR. ​

Protocol: Select the camera’s manufacturer from this list, or failing that, use the ONVIF protocol (your camera will need to have ONVIF enabled for this to work). ​

Management Port: Enter the Server port set on the camera, which you can find in the SADP tool or in Network>Basic Settings>Port in the camera’s web browser interface. If you haven’t changed this, it is usually 8000 by default. ​

User Name: “admin” or the username of any other users set up on that camera. ​

Password: The password set with that user on the camera – if this is the same as the ‘Default Activation Password‘ you have set on the NVR, then you can tick this box instead. ​

Transfer Protocol: ‘Auto’ is normally best. ​

​

When these are completed, click OK.​

​

Your camera should then appear in the list of devices with an assigned channel, and an Online status, meaning it has been successfully added.​

.

.

Extra tips…​

How do I reset my Hikvision device to factory settings?

In some cases, you’ll need to reset your Hikvision device to its inactive factory state. This could be if you’re passing the system on to somebody else; if you’ve forgotten your password; or simply if something has gone wrong during the configuration, meaning you need to start afresh.

There are a couple of ways of doing this, the method you’ll use depends on whether you have a password to log into the device.

Please see the simple steps for doing each below:

Via the device’s backend in a web browser or iVMS-4200:

If you are able to log into your device’s configuration menu in iVMS-4200 or the web browser interface, then the easiest way to reset it is on the Upgrade & Maintenance page here. The steps below show you how to find this page in both interfaces.

Step 1:

iVMS-4200:

In a web browser:

Step 2:

In both iVMS-4200 and a web browser:

Factory reset by using the device’s pushbutton:

On the majority of Hikvision’s newer camera models, there will be a pushbutton on the camera which will allow to carry out a hard reset without needing to log into it. This is most useful when you have forgotten your password, as it allows you to set a new password on the camera while avoiding much of the faff involved in doing this through the SADP tool.

Step 1:

​

Step 2:

1. Disconnect the camera’s power supply.
2. Press the reset button and keep it held down.
3. Restore the power supply while continuing to hold down the button.
4. Keep the button pressed for a further 10 seconds.
5. Release the button and wait for the camera to reboot.

.

The app’s home screen allows you to see all your cameras’ latest activity at a glance, so you can quickly identify any potential security threats. The events gallery allows you to view all your cameras’ events at once or individually, making it easy to track activity over time.

With quick access to live streaming, you can now monitor your property in real-time, giving you peace of mind when you’re away. The app also provides important information on each camera’s status, allowing you to better manage and maintain your cameras.

The VOSKER® Sense AI Tools ensures that you receive notifications that matter to you. With advanced motion detection, you can customize alerts to receive notifications on your phone only when a person or vehicle is detected. This feature also reduces false notifications, so you’re not constantly bombarded with unnecessary alerts.

VOSKER cameras use 4G-LTE cellular network and are not compatible with Wi-Fi. To activate your camera with the supplied SIM card, you’ll need a VOSKER data plan, and you’ll need one plan for every camera on your account.

Take your surveillance efforts to the next level. Download the VOSKER mobile app today and experience the ultimate in remote area monitoring.

ACCESSING YOUR ACCOUNT

Use your login credentials to access your VOSKER account from the web browser. To access your account from your mobile, you will need to download the VOSKER app from Google Play Store (Android) or Apple App Store (iOS). You can modify your personal information or add other cameras to your account from either the web browser or the mobile app. You can also add other users, however, you must share the same email address and password.

HOW CAN I BUY A PLAN?

If you are using an Android phone, you have the option to purchase a plan either from your VOSKER mobile app or from the web browser.

For iOS users, you will need to access your VOSKER account from the web browser to purchase a plan.

VOSKER MOBILE APP :
To purchase a plan from your VOSKER mobile app,

VOSKER WEBAPP :

Once you login to your account, follow the steps below to purchase a plan:

*Remember that you can save up to 10% when you select a yearly plan!

.

VOSKER APP setup and User guide

HOW DO I HAVE ACCESS TO THE FREE PLAN?

V150
V150 comes with a 7-day free trial of our Elite plan that will give you unlimited photos and 40 HD photos for those 7 days. After your trial period is over, you’ll need to purchase a plan in order to keep receiving photos in your VOSKER mobile app. Photos will still be saved to the MicroSD card of your camera.

V200 and V100
You will receive a 30-day free trial of the Elite Plan where you will be receiving unlimited photos and can request up to 40 HD photos. After the first 30 days of activation on the unlimited plan, your camera will automatically transfer to the free plan where you will receive up to 100 photos a month. You can purchase a paid plan any time after the 30-day trial period is over.

HOW CAN I DOWNLOAD HD PICTURES ON MY PHONE?

Users are now able to get HD versions of their most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.
*except for the FREE plan

On the right top corner of each of your pictures you will find an HD icon. Click and your picture will start uploading.

View of the Mobile App:

HOW TO CHOOSE THE RIGHT TRANSMISSION PLAN FOR MY SECURITY CAMERA?

Cellular security cameras are great for monitoring your property remotely. A notification pops on your phone, and you see somebody lurking around the construction site, the farm or the marina.

This system relies on the data plan you will pick and the number of photo alerts included. But how do you know how many alerts you will need? We listed points to consider when buying your data plan.

Photo count

First, consider how many alerts you expect the security camera to send in a month. Since the data plan works off of a monthly allotment, having a rough estimate based on the 7-day free Elite trial is a good place to start.

Location may come into play. The number of photo alerts may vary if you installed the camera in an empty yard or at a busy security gate. How many times will people or vehicles pass in front of it daily? Also, consider other elements moving in front of the camera, like animals, objects, and weather conditions.

Settings

On top of this first estimation, you must factor in your camera settings preferences in the VOSKER app.

How many alerts are you ready to miss?

The camera saves photos on the memory card when you reach the monthly photo alerts. You will no longer receive any alerts in the app until the photo count is reset in the next monthly cycle or unless you upgrade the plan. It all comes down to your tolerance of missing information.

Test it

A great way to evaluate your needs is to get a monthly Elite plan for your newly installed camera. Test the settings to fit your objectives and monitor the photo count. Once the setup is steady, and you get a good idea of the photo alerts, it is time to pick the best plan and frequency.

Remember: you can save 10% off the monthly fee by purchasing the data plan annually.

Flexible

You may use your security camera at different locations or for different purposes within a year, affecting the number of photo alerts you need. Remember, you can upgrade or downgrade a monthly data plan*. It is also possible to suspend its auto-renewal if you need a break.

You now have all the tools to make the best decisions for your surveillance solution.

*Annual plan can only be upgraded with extra charges.

WHAT CAN I DO TO INCREASE MY PHOTO QUALITY?

Understanding the different features and specifications of the VOSKER cameras can help you choose the right camera at different locations on your property that will give you optimal photo quality. If you intend to set up the camera in a place where the objects are moving fast, choose a camera with a faster trigger speed to ensure the camera activates and captures the photo before the object moves out of the frame. Cameras that have a larger motion detection range are a better choice when you want to set up the camera over larger areas.

Here are a few things that you can do to improve the quality of your photos:

.

WHY DOES THE RESOLUTION ON MY PHOTOS SEEM TO BE LOW?

The photos that your camera is sending have been compressed to facilitate the transfer. You will find the best photo quality directly on the SD card inside your camera. You can also get HD versions of your most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.

On the right top corner of each of your pictures, you will find an HD icon. Click and your picture will start uploading. *except for the FREE plan

WHY DO MY PICTURE COLORS LOOK WRONG?

If the color of your photos looks different than normal, E.g., Pink or Black photos, check the following:

CAN’T LOGIN TO MY VOSKER ACCOUNT.

If you are having issues logging in to your account, verify the following:

STEP 1

STEP 2

STEP 3

If following the steps above did not resolve your issue, please contact VOSKER support team for assistance.

HOW TO CHANGE MY CAMERA SETTINGS FROM THE VOSKER APP

To change your settings for your VOSKER camera, navigate to the “Settings” tab. Make sure to choose the correct camera from the dropdown option at the top. You will see 3 sections: Basic, Cellular Setup, and Advanced Options. You can change the settings under these sections according to your preference and select the “Apply Changes” button to save the settings.

Note: Our cameras communicate with our servers based on the frequency set in your settings. For example: If your Transfer Frequency is set to 2 times a day, this means that your camera will communicate with our servers 2 times a day.

VOSKER SENSE

VOSKER SENSE is a tool that uses artificial intelligence and enables you to easily differentiate between a human and a vehicle in a photo. All our plans, except the Free plan, include VOSKER® AI Tools. So, make sure you are on one of our paid plans. To use this feature,

HOW TO DELETE CAMERA FROM ACCOUNT

HOW CAN I SHARE MY PICTURES WITH SEVERAL PEOPLE?

WHAT IS THE RESOLUTION OF THE TRANSMITTED PHOTOS?

V200

V150 and V100

.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option (  ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu (  )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu (  ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note:  Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu.  Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file.  Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed.  Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the  icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings  icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the  icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings (  )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the  option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon (  ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon (  ) for the device. Select Video Channel  and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit (  ) icon and name the tour. Click the checkmark (  ) when finished.

Note: Click the Go icon (  ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the  icon and select the Edit (  )icon.

Step 4: Enter a name for the tour and click the add (  ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play (  ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop (  ) icon in the Tour (  )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon (  )

.

Features:

(Supported features depend on camera features)

For more information download the Alibi Cloud VS Mobile App User Guide.

iOS App

• 

.

Android App

• 

.

.

Alibi Cloud VS

Direct Camera to Cloud Video Surveillance

Our cutting edge cloud-based VSaaS offering has gained significant traction with dealers and end-users and is poised for significant growth in 2023 and beyond. If you are not selling cloud-based video surveillance then you are missing out on opportunities to recession-proof your business. We’ll be hosting demo sessions to show you how simple it is to install/setup and how it saves you time and money by avoiding truck rolls with an easy to use interface that helps you solve most issues remotely. And it is super easy for your customer to use as well, making it incredibly appealing for home and business installs.
Learn how this powerful solution is gaining traction in cannabis, medical, retail/restaurant and education applications.

.

Brivo Cloud Access Control

Brivo + Alibi Security: Better Together

Brivo and Alibi Security bring you the best of both worlds… Unlimited access to Brivo’s world-class solutions and support, plus Alibi’s dedicated sales support & innovative marketing platform. The Brivo Accelerate Program is designed to help accelerate growth of YOUR access control business!

.

Alibi Arsenal

Our FREE Marketing Engine, Ready to Power
Your Business

Marketing is not easy. Alibi Arsenal business growth tools and resources make it easier. This FREE platform can help you generate leads with brandable sales/marketing flyers, get found online with improved Google My Business setup and to turn your current customer base into advocates through a powerful reviews engine. Plus, we give you access to tools that make it easier to tap into your current customer base to generate incremental business by cross-selling products and services.
Come by for a LIVE demo of this platform and to learn how you access these powerful tools.

.

Expect More from
Your Security Provider

.

Alibi Security is a trusted provider of security technology, cloud solutions, and growth enablement services—serving thousands of security professionals for more than 35 years. We are committed to quality, continuous innovation, and the investment in the PEOPLE, SOLUTIONS, and SUPPORT required to help our Dealer Partners succeed.

.

.

Enterprise Performance
– Without Breaking the Bank

Alibi Cloud VS makes enterprise-level cloud surveillance accessible for virtually any-sized application or budget. Featuring an ultra-secure camera-to-cloud architecture, Alibi Cloud VS dramatically reduces your up-front hardware investment and maintenance requirements, saving you valuable time and money. Ideal for both business and residential applications, Alibi Cloud VS is remarkably scalable – and can easily support larger camera counts and multi-site projects.

Centralized
Management

View cameras from single or multiple locations via a single dashboard, simplifying management and streamlining review of your video evidence.

Eliminate Common
Failure Points

Stream directly from camera to the cloud, ensuring you never lose video footage due to a faulty recorder or failed hard drive.

Enhanced
Security

No port forwarding necessary. SSL/TSL handshakes are used to make the connection from camera to cloud, ensuring encrypted transmission up and down. Video is stored in ultra-secure Tier 4 data centers, featuring triple-redundancy and fault-tolerant infrastructure to ensure your evidence is always safe.

Lower Total Cost of
Ownership (TCO)

No recording equipment, minimal maintenance requirements, and on-demand scalability – so you only pay for what you need, when you need it.

.

.

Before referring to this Mobile Application User Guide you must first download and install the mobile application on your mobile device (smartphone or tablet). You can find links to the mobile application(s) on www.alibisecurity.com at the following location:

.

SUPPORT Menu > DOWNLOADS > ALIBI CLOUD VS MOBILE APP

.

Choose the link that applies to your mobile device (iOS or Android), download and install the application. Now you are ready to install and activate cameras.

.

Adding a Camera via the Mobile Application

.

The first time you login to the mobile app, you will be required to enter your username (email address) and the password. The screen will show no cameras attached to your account. You will tap the ADD A CAMERA button on the screen and it will prompt you with a second screen to select the type of camera you want to install. Tap on the ADD A CLOUD CAM section. The next screen gives you specific instructions for attaching your cloud-enabled camera to the network.

.

IMPORTANT: All POE and WiFi cameras must be hard-wired into the local network in order to be discovered by the Alibi Cloud VS solution.

.

Once you have connected the cameras you want to add to your Alibi Cloud VS account to the local area network (LAN) you can tap the CONTINUE button.

.

.

..

.

The next screen displays your local network and the cameras that are available to be added to your Alibi Cloud VS account. Tap on the camera you want to add from the list and you will be prompted to name your camera. Type in a name and choose CONTINUE. The system will ping your camera, check credentials and firmware and connect. You should receive a confirmation screen that the camera has been added then tap CONTINUE.

.

.

.

..

.

To get your WiFi camera to the wireless network you need to connect the WiFi camera to the wireless network. Tap the zone that the WiFi camera is in. This takes you into the camera selector menu. Select the WiFi camera you want to attach and it will open the camera settings menu. On the main screen, under NETWORK

SETTINGS, it will say “Not Connected”. Select this menu option and it will take you into the wireless connection menu, displaying the available wireless networks to connect to.

.

.

.

.

Tap the wireless network you want to attach the camera to. A login screen will open up asking you to enter the password for the wireless network. Enter the password and tap CONNECT. The system will them connect the camera to the wireless network and you will receive a confirmation screen once completed.

.

IMPORTANT: You must keep the WiFi camera hard-wired into the network until you login to the wireless network. Once you get the camera connected to the wireless network you can disconnect the network cable and move the camera anywhere that it has good signal strength to connect to the wireless network.

.

.

.

.

.

.

From the main dashboard screen you have two different ways you can add additional cameras to the system. If you want to add another camera to the same zone you already have setup, simply choose the zone on the main dashboard screen, it will pull up the camera viewing screen and you will tap the Gear icon at the bottom. It will open a screen that shows the current camera(s) assigned to the zone and the ADD A NEW CAMERA button.

Tap this and follow the instructions to add a new camera.

.

.

The second option for adding cameras is to setup a new zone and add the camera to that new zone. From the main dashboard screen tap the + icon in the top left corner of the screen. This opens a new screen that lets you setup a new zone. Click ADD CAMERA and then follow the instructions for adding a new camera explained previously in the User Guide.

.

.

From this menu you can also move cameras currently signed to other zones to the new zone. Simply click SELECT CAMERAS FROM OTHER ZONES. A menu will be displayed showing cameras already attached to other zones. Click the camera and move it to the new zone.

.

After adding the camera you will be taken to the main camera dashboard screen. From this view you can see all of the zones cameras have been assigned to. Select the zone you want to view. An individual thumbnail view of the camera(s) will be displayed. Tap on the gear icon at the bottom of the screen and it will take you into the settings selection menu. Choose the arrow to the right of the camera that you want to adjust settings for and you will be taken to the settings menu for that specific camera.

.

.

.

.

.

.

.

.

.

.

.

PoE Camera Setting Menu

.

.

.

.

.

.

.

WiFi Camera Setting Menu

.

In the settings menu for each camera you are able to control the following settings:

.

.

Account Settings and TouchID/FaceID Login

.

After you login and add a camera to your system you can select the home button at the bottom left of the screen and it will take you to your main dashboard. Select the person icon in the upper right and this will take you into account settings. From here you can enable remote support access, enable/disable push notifications and enable TouchID/FaceID login for easy access when starting the app.

To view live video from your cameras connected to Alibi Cloud VS, go to the main dashboard screen and select a zone to view. Once in the zone, you will see the individual cameras with ‘play arrows’ located in the middle of the thumbnail screen. Simply click on one of the ‘play arrows’ in the thumbnail and live viewing will begin. You will see the word “LIVE” appear at the top of the thumbnail viewing screen. Want to enlarge the viewing area? You can simply turn your smartphone/mobile device to landscape to view in full screen mode.

.

Viewing recorded video (footage) is also very simple. You will need to choose the zone that includes the camera you want to review recorded video from. This will display thumbnail views of all cameras associated with this zone. If you have multiple cameras in a zone, you will see multiple thumbnails. To view recorded footage for

a specific camera tap the clock/rewind icon ( ) at the bottom of that camera thumbnail view. This will take you into the footage screen where you can review a timeline, with detection events noted. You can scroll through the timeline by scrolling with your finger, either up or down, to view events that happened earlier or later in the day.

.

.

There are settings and features on the playback screen that make it easier for you to review video quickly. You can select the ZOOM IN button and the timeline will appear in smaller increments, allowing you to find events more accurately. You tap the MORE menu and adjust playback up to 10x faster than normal.

The SUMMARY button at the bottom of the page lets you create and download a video summary of detection events for the last 24 hours. Simply click the button and the app pulls detection events into a single summary video. Creating a summary takes a few minutes and once completed you have the option to save the 24 hour summary to your mobile device or share it with someone else.

.

If you have forgotten your password or simply want to reset it, you can easily do this by selecting the person icon in the main dashboard screen. Click ‘Logout’ and on the next screen tap ‘Log In’ and it will take you to the main login page. Tap ‘Forgot Your Password?’ and a screen will appear for you to enter your email address. By entering your email address and clicking ‘Send’ you will receive a secure link in your email to reset your password for your Alibi Cloud VS account. This new password will be valid in desktop and mobile apps.

.

.

In scenarios where you already have a cable installed between the network and, say, your garage, where installing more cables is difficult, having to run a second cable is not ideal. However, we’ve discovered the Vigitron Netmux Vi00103 POE Multiplexer, a great gadget that combines two POE ports on your network side into one cable, and then splits them again at the camera-end, to solve this problem.

Below is some more important information on the specification and capabilities of the Vi00103, as well as our 6-step instructions for using it correctly.
.

Connecting multiple IP Cameras together v1.

Instructions:​

Step 1:
.

Connect the two RJ45 cables from the Vi00103RX combiner, labelled “Port 1” and “Port 2”, to two available POE ports on your POE switch or NVR.​

​

NOTE – The cameras do not need to be activated with a password. If you are connecting them directly to an NVR, then the Plug & Play feature will still work and activate the cameras; If you are connecting them to a separate POE switch, you will be able to access them and activate them on your network later. Plug & Play setups will also work when cameras have already been activated, as long that these are set with the same password as the NVR and have DHCP enabled. ​

.

Step 2:
.

Connect your single Cat5/6 cable to the port on the Vi00103RX combiner, which is labelled as “Port 1 + Port 2”.​

​

Step 3:
.

Now, plug in the other end of the long single cable to the Vi00103TX splitter’s “Port 1 + Port 2” RJ45 port.​

​

NOTE – this cable cannot be longer than 100m / 320 feet​

​

​

Step 4:
.

Connect your IEEE802.3af/at IP cameras or POE devices to each of the ports, labelled “Port 1” and “Port 2”, using another Cat5/6 cable for each.​

​

NOTE – the length of these cables, and the long single cable between the Vi00103RX and Vi00103TX cannot exceed 100m / 320 feet in total, as this is the maximum standard range of POE. ​

​

Step 5:
.

Green lights should appear on the Vi00103TX to confirm that each of the ports is delivering POE to your devices. If they do not, check the power supply to your POE source and all of your Cat5/6 cables are secure.​

​

Step 6:
.

If you are connecting the cameras directly to an NVR as “Plug & Play”, then they will connect and appear automatically after a minute or two. Alternatively, if you are connecting them to a separate POE switch, then they should be discoverable on the network and allow you to adjust any network settings so you can add them to your CCTV system.​

.

.

Key benefits:​

.

Limitations & key points to consider:​

.

Network topology diagram & dimensions:​

.

Can I connect more than one camera via a POE switch to a single POE port on my Hikvision NVR?

In some scenarios, it can be useful to have several cameras connected to a POE switch but to keep that switch directly connected to your NVR rather than the local network.

If you are able to connect each camera to its own POE port on your NVR, then this is generally advisable, as using a Plug & Play setup is much simpler and avoids the need for extra hardware or power supplies.

However, if your NVR is closer to your POE switch than it is an available access point to your LAN, then it can make connecting the cameras simpler whilst avoiding the need to have an ethernet cable running from each camera back to the NVR.

One other benefit of keeping the cameras connected directly to your NVR this way, rather than connecting them across your LAN, is that the connection does not rely on your router being operational. Provided the NVR and POE switch are working, the cameras will remain connected and recording regardless of any problems that might occur with your local network.

These seven steps below explain how to connect multiple cameras on a POE switch to a single port on your NVR.
.

.

.

Important things to note:​

How do I use a Hikvision NVR’s “Virtual Host” feature?

One of the most successful selling points of a Hikvision NVR to many small-setup customers is the “Plug and Play” functionality that simplifies the setup process of their surveillance system. However, plugging a camera directly into a port on the NVR, unfortunately, does not allow you to access the camera via its own internal LAN IP using a browser due to it being on the NVRs internal network, and this can significantly reduce the number of configuration options you have access to.

The NVR does allow you to configure many options for each connected camera, but some essential features are only accessible via connecting to the camera itself (such as audio codec options). This was of course a big problem previously.

With the advent of newer firmware and models of NVR, Hikvision has introduced a feature called Virtual Host. Activating this feature turns your NVR into a “host” for the cameras allowing you to connect to them via a browser. Essentially, the NVR forwards all traffic received from your browser to the appropriate camera you’re trying to connect to, eliminating the biggest problem of plug and play functionality.
.

.

Step 1:​

First of all, access your NVR via a web browser. If you do not know the LAN IP of your NVR, download Hikvision’s tool SADP tool, which scans your network for any Hikvision devices that are connected and allow you to see and change their network settings, including the IP address.​

​

Download SADP for Windows ​

Download SADP for MacOS​

.

Step 2:​

Once you’ve logged in, navigate to: ​

​

Configuration → System → Camera Management​

.

​

.

This screen displays all the connected cameras on your NVR. Notice that the final column labelled “Connect” is currently empty. We’ll be coming back here in a moment.​

.

Step 3: ​

Now, navigate to:​

​

Network → Advanced Settings → Other ​

​

Turn on the Enable Virtual Host option.​

​

Note – Your NVR will reboot when you click “Save”.​

.

.

​

Step 4:​

Now, navigate back to the Camera Management window from earlier. You’ll notice that the previously empty connect tab now features links for each camera currently connected to your NVR.​

.

​

Step 5:​

Click on any of these links to access the respective camera via your web browser:​

That’s it, you’re done!

This should be useful when you want to access options on your camera that your NVR doesn’t feature. If you have any further questions feel free to ask, we’re happy to help.

About this Document

Safety Instruction

.

●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the device and shall be easily accessible.

●For the device with the sign  indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.

●Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Do not ingest battery. Chemical Burn Hazard!

●This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

●Use only power supplies same with the original model, or LPS power supplies with the same voltage and electric current.

Preventive and Cautionary Tips

.

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.

●The device shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

●No naked flame sources, such as lighted candles, should be placed on the device.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains. The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.

● identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

● + identifies the positive terminal(s) of the device which is used with, or generates direct current, and – identifies the negative terminal(s) of the device which is used with, or generates direct current.

●If the device has been powered off or placed for a long time, its coin/button cell battery may run out power.

●When the coin/button cell battery runs out power, the system time would be incorrect, please contact the after-sales service to replace the battery.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Do not touch the sharp edges or corners.

●When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to make the HDD temperature in S.M.A.R.T. below the stated value.

●Provide a surge suppressor at the inlet opening of the device under special conditions such as the mountain top, iron tower, and forest.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.

●The serial port of the device is used for debugging only.

●If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure.

●If a power adapter is provided in the device package, use the provided adapter only.

●For the device with sticker or , pay attention to the following cautions: CAUTION: Hot parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching off before handling the parts.

●If the device needs to be installed on the wall or ceiling,

1.Install the device according to the instructions in this manual.

2.To prevent injury, this device must be securely attached to the installation surface in accordance with the installation instructions.

●Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power adapters may decrease.

●Make sure that the power has been disconnected before you wire, install, or disassemble the device.

●If the device needs to be wired by yourself, select the corresponding wire to supply power according to the electric parameters labeled on the device. Strip off wire with a standard wire stripper at corresponding position. To avoid serious consequences, the length of stripped wire shall be appropriate, and conductors shall not be exposed.

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Hikvision New GUI 5 User Guide

Content Convention

.

In order to simplify description, please read the following conventions.

.

.

.

Reason

Solution

.

Note

If your video recorder notifies not support this function, you can log in to the camera, and adjust video parameters via web browser.

.

Reason

The camera password is too weak.

Solution

Change the camera password.

.

.

Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

.

.

.

Reason

The camera encoding format mismatches with the video recorder.

If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/ MJPEG, change the camera encoding format to the same as video recorder.

.

.

Solution

Check if the encoding type at live view toolbar is H.265.

.

.

Reason

The video recorder uses the same IP address as other devices.

Change the IP address of video recorder. Ensure it is not the same as other devices.

.

Intelligent Operation – Smooth UI experience

Intuitive live view

• Check the real-time channel status clearly

• With customized views, live views can be more intuitive on one view layout and enable automatic switching to meet the needs of multi-screen timed switching

The conventional video searching methods usually are time-consuming. Right now, the Smart Search and the AcuSearch functions could help accelerate searching efficiency in minutes, even in seconds.

Smart Video Searching

The NVR 5.0 with converged functions provides support for video, audio, alarm, access control, and other application access. Creating intelligent applications for different scenarios and needs.

.

EZCLOUD REGISTRATION

Uniview provides a web portal to sign up and register an account with EZCloud. http://en.ezcloud.uniview.com It is recommended that Internet Explorer 8 or higher be used to view the web portal.

.

There are a few aspects to note about the web portal:

.

.

An account can also be registered through the EZView smart phone application. See Adding A Device -> EZView

.

ACCOUNT SIGN UP

.

Signing up an account is very similar to most other online account registration as seen from the image above. Enter in the proper information requested such as the Username, Password and a valid Email

address. Click the Acquire button to receive a registration email which provides a Verification Code. Please note that the email may take several minutes to arrive.

.

Enter the Verification Code into the box provided and click the Sign-up button to register the new EZCloud account.

.

PRO TIP: Integrators and Installers can setup an account and then share device access to customer accounts for managing multiple devices and providing support later.

.

.

ACCOUNT LOGIN

.

.

Login either with the Username or registered Email address created previously for account management. If the password has been forgotten, there is a link provide for password retrieval.

.

EZCLOUD MANAGEMENT

Once the register code is located, there are three different ways to add and manage devices on an existing EZCloud account; through the EZCloud web portal, through the EZView smart phone application and through the EZStation CMS.

EZCloud Quick Install Guide v2

.

REGISTER CODE

The Register Code is a unique 26 digit & character string that is used to connect a device to the EZCloud service. This code also comes in a QR format for quick scanning. There are a few places you can find the Register Code:

.

Note the QR Code on the sticker for quick adding the device to an EZCloud account via the EZView smart phone application (more on the EZView app later in this guide).

.

The myCloud feature is toggled on by default. Please note that a new myCloud account cannot be registered from the recorder interface.

.

NOTE: On some device firmware versions Uniview uses the title myCloud rather than EZCloud. The URL containing myCloud will redirect to the proper EZCloud URL accordingly.

.

.

.

NOTE: Currently (as of December 2015), the web interface of Uniview devices will only work properly on Internet Explorer version 8 or higher.

.

EZCLOUD WEB

.

.

.

Once logged into the EZCloud web portal (as described in the EZCloud Registration guide section above), the backend will appear as the image shown above. To add a device, click the + Add Device button and a new webpage will display with entry boxes for both the Register Code and Device Name. The Register Code is the 26 digit and character string detailed in the section above. The Device Name is a title that represents the device being registered (e.g. Office B, 123 Elm St, ABC Company, etc.)

.

.

After clicking the Add button, the Device List will appear again with the newly registered device listed under My Cloud Devices. If the P2P service plug-in was not previously installed, the follow message will appear on the upper most portion of the web page:

Click the Download link and install the plug-in (the computer may have to be restarted to complete the install) After rebooting the Windows PC and accessing the EZCloud backend again, there may be a similar message on the lower portion of the web page as follows:

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

On the management page, there are three different sections: My Cloud Devices, Shared Cloud Devices and Sharing Records.

.

.

MY CLOUD DEVICES

The My Cloud Devices section of the EZCloud management page lists all added devices to the registered account. The devices can be navigated using a simple interface utilizing arrows to browse through the results (see toolbar at the bottom of each section).

.

As with the following sections, there are multiple columns that denote information that pertains to the recorder(s) registered to the account.

.

• Device Name – the name given to the device when it was first registered.

• Device Type – the model # of the registered device

• Device IP – the external IP address of the registered device

• Latest Online Time – the time the device was last detected to be online

• Status – indicates whether the device is Online, Offline or having a network error

• Share Device – a link that provides a menu to share the registered device:

NOTE: The ‘Share To’ input box receives the email or username of the account being shared to. A date and time can be set indicating how long the device will be shared. A specific user group can be selected defining the rights given to the shared device. Finally, a description can be entered to let the user know details that represent the device.

• Change Name – a link that allows the user to change the name of the device

• Retrieve Password – allows the user to generate an overriding password in the case of a forgotten password:

.

NOTE: All information will be entered automatically into the above form as it pulls it from the registered device. By clicking the Acquire button, the form will send an email with the verification code. Enter the verification code into the input box and click Retrieve to receive a password. The generated password will only work for the valid date and only if the device is properly set to the valid date. If the date is set incorrectly on the device, adjust accordingly on the Retrieve Password web page.

.

SHARED CLOUD DEVICES

The Shared Cloud Devices section displays a list of devices that were shared to the registered account. The columns of information in this section are very similar to My Cloud Devices, however there are some unique information displayed for shared devices.

.

.

All other columns such as Status, Change Name, Access Device and so forth, function exactly the same as in the My Cloud Devices section.

.

SHARING RECORDS

The Sharing Records section displays a list of devices that have been shared by the registered account. As with the previous sections, there are some columns of note.

.

EZVIEW

.

EZView is Uniview’s smart phone application for monitoring, configuring and managing multiple camera systems. Typically, a device will be added to an EZCloud account using the EZView app due to the ability to forgo using a computer for set up.

.

REGISTER (EZVIEW)

On the main screen, there is an icon in the upper left-hand corner that appears to be like three lines stacked. This is the main menu button. Click the main menu button and then click the P2P Account link at the top of the menu. This will bring up a Login screen that also has a few notable links. The first is the Sign-Up link that will allow for a new account to be registered through the app (similar to the web portal method detailed earlier in this guide). The second link, Forgot Password, gives a similar menu to allow for an email verification and password change.

.

Once logged in to the registered EZCloud account, the P2P Account menu will appear (referenced above). On the P2P Account menu there are a few minor options which include the ability to change the account’s username and password. The My Sharing Records menu lists all instances of when devices have been shared from the current account and sharing can be canceled on any of these instances.

.

My Devices links to the Devices menu which displays all devices added to EZView (includes MyCloud Devices). See the third image above; there are different icons that indicate what kind of device is being listed. The light blue recorder with a cloud symbol indicates a device added via EZCloud and the teal recorder with the share icon indicates devices that have been shared via EZCloud.

.

ADD A DEVICE (EZVIEW)

To add a new device to EZCloud, click the small + icon in the upper right-hand corner of the Devices menu. Below is an image of the Add Device menu.

.

The Add Device menu contains the following options:

.

.

The Save button in the upper right (looks like a floppy disk) will add the device to the logged in registered account. The Start Live Preview button will not only add the device, but it will also launch all cameras in Live View.

NOTE: A registered EZCloud account must be logged in before adding a new device via P2P.

.

EZSTATION

.

EZStation is Uniview’s CMS software that allows for monitoring, configuring and managing multiple camera systems on a Windows PC. NOTE: Currently (as of December 2015) there is no CMS software developed for Apple Mac computers.

.

REGISTER (EZSTATION)

Registration of a new EZCloud account is straight forward; on the Home Screen (shown above) click the Device Management tile and then click the Cloud Device on the left toolbar under the Device tab. By clicking the Register button, the EZStation software will launch an Internet Explorer browser window to register an account online. The process of registering on the EZCloud web portal is located in the EZCloud Registration section of this guide.

.

Once registered (or if already registered) click the Login button to enter in the login credentials for the EZCloud account of choice. Other options include Auto Login, applying for an account from the login menu and account password recovery.

.

DEVICE MANAGEMENT (EZSTATION)

.

There are two main sections of interest here: the My Cloud Device list and the Shared Cloud Device list. Above those two lists are a header with the currently logged in EZCloud account, a Refresh link to refresh the current lists, a Switch Account link which launches a new login menu for account switching and a Logout link.

.

MY CLOUD DEVICE (EZSTATION)

The My Cloud Device list is dedicated to managing devices that have been added to the registered EZCloud account. The toolbar has the following features:

.

.

SHARED CLOUD DEVICE (EZSTATION)

The Shared Cloud Device list displays the devices that have been shared to the currently logged in account. If the integrator opts to share cloud devices with the end user, then the end user will be utilizing this list to see the status and have access to those devices. The toolbar has the following features:

.

Viewing and configuring the cloud devices listed in the Cloud Device menu is the same as any of the other device types on the Device Management page. Please see Uniview’s help file by clicking the User Manual button the topmost toolbar in the upper right of the EZStation software, to learn about how to group devices to prepare them for live viewing.

.

ADDITIONAL INFORMATION

Cloud Update (firmware) will not function unless the device is registered to an EZCloud account.

.

EZView has a speed test function that allows the user to find the upload speed for a device registered to the currently logged in EZCloud account.

.

A device can only be registered to one EZCloud account. All other accounts need the device to be shared to them by the EZCloud account that the device was originally registered to unless the device is deleted from the original account’s device list.

.

EZCloud may be referred to as MyCloud on older firmware versions.

.

P2P refers to Peer-To-Peer. A “Cloud” device refers to, in the case of EZCloud, a device that has been registered to EZCloud for remote connection (not a remote storage medium). The way P2P works is that the device connects to the EZCloud server and then to the end user. The EZCloud acts as a go between, rather than having to open up ports (pinholes, virtual servers, etc.) to allow remote access to offsite clients. This is the preferred method of remote connection since open ports can pose a security risk and can be difficult to setup on complex networks (especially when a firewall is implemented).

Also, many satellite internet service providers and mobile hotspots will not allow ports to be opened unless a static IP is purchased (usually at a premium).