O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.

If you can’t find the QR code or can’t scan the QR code, please select Wireless camera.

3. Make sure your O-KAM Pro camera is ready to connect, the camera light is flashing or you hear the prompt “Please use the app for Wi-Fi configuration”.

Note: If the light is not blinking or there is no prompt tone, please reset the camera.

Then click ‘I heard the prompt tone or see the indicator light flashing’, go to the next step.

4. Enter your wifi password, then click Next.

Please choose 2.4G wifi, some O-KAM Pro cameras only support 2.4G wifi.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

5. Make sure your wifi is 2.4g and the wifi password is correct, then click Confirm. Give the displayed QR code to the camera to scan.

Place the QR code about 15-30 Inch in front of the camera to scan, and complete the scan after hearing the “beep” sound.

After the connection is successful, it will automatically jump to the next step.

After successful connection, you can test the wifi signal strength, or later in the test, please put the O-KAM Pro camera in the location with strong wifi signal.

The app will prompt you to subscribe, it is recommended to cancel, if you need cloud storage, make sure the O-KAM Pro camera can work properly before subscribing.

AP Mode Connecting O-KAM Pro Camera

If the QR code connection fails or the QR code cannot be scanned, you can try to connect the O-KAM Pro camera using AP mode.

1. Go to your mobile phone’s wifi list to connect to the hotspot wifi of the O-KAM Pro camera, return to the O-KAM Pro APP after the connection is successful, and then the app will auto add the camera.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

2. Go to Settings, select Device Settings, and then click Wi-Fi network.

3. Select your wifi, then enter your wifi password, click Confirm and wait for O-KAM Pro camera to connect to your wifi.

Share O-KAM Pro Camera

Once you have connected the O-KAM Pro camera, if you want your family or friends to use the camera as well, you need to share the camera with your friends via the Share function.

1. Go to the Share screen, then send the QR code to your friend.

Permission Settings:

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

2. Have the invitee download the O-KAM Pro APP and register and login, then click + scan the QR code to add a camera.

Connecting O-KAM Pro Camera without a router

If you want to use O-KAM Pro camera without internet or router, you can connect to the included hotspot wifi to use the camera.

This mode only supports close range use.

1. Go to your mobile phone’s wifi list to connect to the camera’s hotspot wifi, after connecting, return to O-KAM Pro, the app will auto add the camera, then you can start to use it.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

Function setup – Wired O-KAM Pro Cameras

The functions of different types of O-KAM Pro cameras differ slightly, so please check your camera type.

If your camcorder needs to be connected to the power supply at all times to work, then it is a wired O-KAM Pro camcorder type, please check the function setting instructions below.

Recording Setup – Wired O-KAM Pro Cameras

O-KAM Pro camera supports cloud storage and memory card recording, cloud storage requires subscription, the following memory card recording settings.

You need to insert the memory card to record, the recording will be saved in the memory card, after inserting the memory card, the camera will sound a voice prompt.

The default is to start 24 hours recording, you can change the recording mode in TF Record Settings.

O-KAM Pro camera supports the following recording modes:

If the memory card shows abnormality, please try to format the memory card and reboot the camcorder.

View Recordings – Wired O-KAM Pro Cameras

In the live video interface, click TF Card in the lower right corner to view the video saved in the memory card.

Motion Detection Setup

Activate the Motion Detection function in the Monitoring Function, O-KAM Pro cameras support Motion Detection and Human Detection.

Motion Detection

When the camera detects an object moving, it will send an alarm notification to your mobile phone.

This mode may have a high false alarm rate, if you need to detect only suspicious people, we recommend you to choose Human Detection.

Human Detection

The camera will send alarm notifications to your mobile phone only when it detects humanoid objects.

Activity Zone Setup

Setting the detection area allows the camera to detect a specific location, reducing the chance of false alarms.

Smear the area you don’t need.

Detection schedule

Customize the schedule of Motion detection, reduce false alarms. The camera automatically monitors for you during the scheduled time.

Alarm flashing light

After the alarm flashing light is turned on, the camera will automatically flash when motion detection is triggered.

Camera Siren

When Alarm sound switch is turned on, the camera will emit alarm sound when motion detection is triggered, you can choose alarm sound or record your own sound.

Enter Notification Settings, select Camera Siren and then turn on the Alarm sound switch.

Email notification

An email will be sent to you when a motion is detected.

Click Add an email , then enter the email address you want to receive alarm notification and finish the setting.

Auto Tracking

When Person tracking is activated, the camera will Auto Track people’s movements and monitor all activities. It will automatically switch to and focus on the person when they enter the camera’s field of vision.

This feature is only supported by O-KAM Pro cameras that support PTZ.

Human frame

People are automatically framed in the live video Help you filter out motions of other objects and quickly follow the person’s movement.

Night vision setup

O-KAM Pro camera defaults to black and white night vision mode, you can change the night vision mode in Device Settings, Night Vision.

Only cameras with dual light sources support this feature.

Reset O-KAM Pro Camera

Press and hold the O-KAM Pro camera reset button for 5 seconds to reset the camera.

.

O-KAM Pro Camera FAQ and Troubleshooting

You can find here how to fix O-KAM Pro camera can’t connect to wifi, offline and not working problems.

.

Why is my O-KAM Pro Camera offline?

O-KAM Pro camera is offline, it means the camera can’t connect to the network properly, please follow the steps below to fix the offline problem:

Is the router working properly?
Connect your mobile phone to the router Wi-Fi, switch off the mobile data, can you access the internet normally? If it is not normal, try to restart the router.

Whether the WiF strength is full or not
Put the mobile phone to the camera installation location, detect whether the Wi-Fi signal is full? If the signal is weak, it is recommended to adjust the distance from the router to the camera.

Whether the O-KAM Pro camera is normal
If a memory card is inserted into the O-KAM Pro camera, power off the camera and remove the memory card, then check if the camera works properly.

Replace the power supply with another one.

If none of the above solves the offline problem, try resetting the camera and reconnecting it.

Why does O-KAM Pro camera keep showing that it is connecting?

.

See also  How To Setup O-KAM Pro camera(Complete Manual)

.

You can also try:

If it’s a 4G O-KAM Pro camera, please detect if the SIM card’s is in arrears.

.

The app’s home screen allows you to see all your cameras’ latest activity at a glance, so you can quickly identify any potential security threats. The events gallery allows you to view all your cameras’ events at once or individually, making it easy to track activity over time.

With quick access to live streaming, you can now monitor your property in real-time, giving you peace of mind when you’re away. The app also provides important information on each camera’s status, allowing you to better manage and maintain your cameras.

The VOSKER® Sense AI Tools ensures that you receive notifications that matter to you. With advanced motion detection, you can customize alerts to receive notifications on your phone only when a person or vehicle is detected. This feature also reduces false notifications, so you’re not constantly bombarded with unnecessary alerts.

VOSKER cameras use 4G-LTE cellular network and are not compatible with Wi-Fi. To activate your camera with the supplied SIM card, you’ll need a VOSKER data plan, and you’ll need one plan for every camera on your account.

Take your surveillance efforts to the next level. Download the VOSKER mobile app today and experience the ultimate in remote area monitoring.

ACCESSING YOUR ACCOUNT

Use your login credentials to access your VOSKER account from the web browser. To access your account from your mobile, you will need to download the VOSKER app from Google Play Store (Android) or Apple App Store (iOS). You can modify your personal information or add other cameras to your account from either the web browser or the mobile app. You can also add other users, however, you must share the same email address and password.

HOW CAN I BUY A PLAN?

If you are using an Android phone, you have the option to purchase a plan either from your VOSKER mobile app or from the web browser.

For iOS users, you will need to access your VOSKER account from the web browser to purchase a plan.

VOSKER MOBILE APP :
To purchase a plan from your VOSKER mobile app,

VOSKER WEBAPP :

Once you login to your account, follow the steps below to purchase a plan:

*Remember that you can save up to 10% when you select a yearly plan!

.

VOSKER APP setup and User guide

HOW DO I HAVE ACCESS TO THE FREE PLAN?

V150
V150 comes with a 7-day free trial of our Elite plan that will give you unlimited photos and 40 HD photos for those 7 days. After your trial period is over, you’ll need to purchase a plan in order to keep receiving photos in your VOSKER mobile app. Photos will still be saved to the MicroSD card of your camera.

V200 and V100
You will receive a 30-day free trial of the Elite Plan where you will be receiving unlimited photos and can request up to 40 HD photos. After the first 30 days of activation on the unlimited plan, your camera will automatically transfer to the free plan where you will receive up to 100 photos a month. You can purchase a paid plan any time after the 30-day trial period is over.

HOW CAN I DOWNLOAD HD PICTURES ON MY PHONE?

Users are now able to get HD versions of their most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.
*except for the FREE plan

On the right top corner of each of your pictures you will find an HD icon. Click and your picture will start uploading.

View of the Mobile App:

HOW TO CHOOSE THE RIGHT TRANSMISSION PLAN FOR MY SECURITY CAMERA?

Cellular security cameras are great for monitoring your property remotely. A notification pops on your phone, and you see somebody lurking around the construction site, the farm or the marina.

This system relies on the data plan you will pick and the number of photo alerts included. But how do you know how many alerts you will need? We listed points to consider when buying your data plan.

Photo count

First, consider how many alerts you expect the security camera to send in a month. Since the data plan works off of a monthly allotment, having a rough estimate based on the 7-day free Elite trial is a good place to start.

Location may come into play. The number of photo alerts may vary if you installed the camera in an empty yard or at a busy security gate. How many times will people or vehicles pass in front of it daily? Also, consider other elements moving in front of the camera, like animals, objects, and weather conditions.

Settings

On top of this first estimation, you must factor in your camera settings preferences in the VOSKER app.

How many alerts are you ready to miss?

The camera saves photos on the memory card when you reach the monthly photo alerts. You will no longer receive any alerts in the app until the photo count is reset in the next monthly cycle or unless you upgrade the plan. It all comes down to your tolerance of missing information.

Test it

A great way to evaluate your needs is to get a monthly Elite plan for your newly installed camera. Test the settings to fit your objectives and monitor the photo count. Once the setup is steady, and you get a good idea of the photo alerts, it is time to pick the best plan and frequency.

Remember: you can save 10% off the monthly fee by purchasing the data plan annually.

Flexible

You may use your security camera at different locations or for different purposes within a year, affecting the number of photo alerts you need. Remember, you can upgrade or downgrade a monthly data plan*. It is also possible to suspend its auto-renewal if you need a break.

You now have all the tools to make the best decisions for your surveillance solution.

*Annual plan can only be upgraded with extra charges.

WHAT CAN I DO TO INCREASE MY PHOTO QUALITY?

Understanding the different features and specifications of the VOSKER cameras can help you choose the right camera at different locations on your property that will give you optimal photo quality. If you intend to set up the camera in a place where the objects are moving fast, choose a camera with a faster trigger speed to ensure the camera activates and captures the photo before the object moves out of the frame. Cameras that have a larger motion detection range are a better choice when you want to set up the camera over larger areas.

Here are a few things that you can do to improve the quality of your photos:

.

WHY DOES THE RESOLUTION ON MY PHOTOS SEEM TO BE LOW?

The photos that your camera is sending have been compressed to facilitate the transfer. You will find the best photo quality directly on the SD card inside your camera. You can also get HD versions of your most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.

On the right top corner of each of your pictures, you will find an HD icon. Click and your picture will start uploading. *except for the FREE plan

WHY DO MY PICTURE COLORS LOOK WRONG?

If the color of your photos looks different than normal, E.g., Pink or Black photos, check the following:

CAN’T LOGIN TO MY VOSKER ACCOUNT.

If you are having issues logging in to your account, verify the following:

STEP 1

STEP 2

STEP 3

If following the steps above did not resolve your issue, please contact VOSKER support team for assistance.

HOW TO CHANGE MY CAMERA SETTINGS FROM THE VOSKER APP

To change your settings for your VOSKER camera, navigate to the “Settings” tab. Make sure to choose the correct camera from the dropdown option at the top. You will see 3 sections: Basic, Cellular Setup, and Advanced Options. You can change the settings under these sections according to your preference and select the “Apply Changes” button to save the settings.

Note: Our cameras communicate with our servers based on the frequency set in your settings. For example: If your Transfer Frequency is set to 2 times a day, this means that your camera will communicate with our servers 2 times a day.

VOSKER SENSE

VOSKER SENSE is a tool that uses artificial intelligence and enables you to easily differentiate between a human and a vehicle in a photo. All our plans, except the Free plan, include VOSKER® AI Tools. So, make sure you are on one of our paid plans. To use this feature,

HOW TO DELETE CAMERA FROM ACCOUNT

HOW CAN I SHARE MY PICTURES WITH SEVERAL PEOPLE?

WHAT IS THE RESOLUTION OF THE TRANSMITTED PHOTOS?

V200

V150 and V100

.

 .

What is DMSS APP?

DMSS is a mobile surveillance app with functions like video playback, remote monitoring, device initialization, push notifications, and remote configuration. Devices like IPC, NVR, XVR, VTO, doorbells, alarms and access controllers can be added. After logging into the account, you can use cloud services like cloud upgrade and so on. The app supports iOS 9.0 and Android 5.0 or later systems and can be used with 3G/4G/Wi-Fi.

 .

What are the benefits of DMSS Camera App?

Remote operations

Before talking about DMSS Camera application on Alexa, let’s see what is DMSS? DMSS app can work in an environment with various internet connections. It connects Dahua CCTV products through both Internet and Ethernet. P2P-enabled internet connection shows great simplicity, while IP or domain name-enabled Ethernet connection guarantees strong stability.

DMSS can be operated remotely to immediately and stably control specific devices all around the world through its global network coverage. many functions including PTZ controlling, video preview and playback, video image adjustment (such as White Balance, focus, etc.), alarm subscription, voice intercom and etc. can be done remotely.

 .

increased data security

DMSS adopts multiple layers of data encryption protection to supply better data security to users.

From a product to the platform and then to the mobile client, DMSS uses multiple layers of data encryption protection to provide better data security to users. DMSS camera has also been certified by TÜV Rheinland, meaning the product complies with the GDPR and meets the TÜV Rheinland 2PfG 2624/06.17 standards, offering state-of-the-art information security and privacy protection.

Featuring a more detailed interaction design, DMSS provides a smoother user experience.

 .

Supports thermal products

To prepare the best support for the global efforts in pandemic prevention and control, DMSS CCTV also supports thermal products (supported by CCTV Suppliers), including access control, thermal cameras, and temperature monitoring terminals. It lets the operators control thermal products remotely and perform their duty in a safer manner.

 .

Setup DMSS App on Alexa amazon

Amazon Alexa is a virtual assistant AI technology developed by Amazon. It is able to voice interaction, music playback, make to-do lists, stream podcasts, set alarms, play audiobooks, and provide weather, traffic, sports, and other real-time information, such as news. Using itself as a home automation system, Alexa can also control your home security camera and even we can set up DMSS application on Alexa. Users are able to increase the Alexa capabilities by installing “skills” (additional functionality developed by third-party vendors, in other settings more commonly called apps) like weather programs and audio features.

Most devices with Alexa let users activate the device using a wake-word (like Alexa or Amazon); other devices (like the Amazon mobile app on iOS or Android and Amazon Dash Wand) require the user to click a button to activate Alexa’s listening mode, although, some phones also let a user say a command, such as “Alexa” or “Alexa wake”.

In September 2019, Amazon launched many new devices achieving many records while competing with the world’s smart home industry. The new Echo Studio became the first smart speaker with 360 sound and Dolby sound. Other new devices included an Echo dot with a clock behind the fabric, a new third-generation Amazon Echo, Echo Show 8, a plug-in Echo device, Echo Flex, Alexa built-in wireless earphones, Echo buds, Alexa built-in spectacles, Echo frames, and Alexa built-in Ring, and Echo Loop.

How to use Alexa for your home security camera?

Using Alexa with a home security camera adds comfort. You can use a smart display screen in your house to immediately and easily review past footage and see who’s at the door right now. Just make sure you have compatible devices and you’ll be using Alexa to check in on your camera (or cameras) in no time. One of the utilities of Alexa is setting up the DMSS application on Alexa. Let’s we how we can do it.

 .

DMSS application on Alexa: How does Alexa work with DMSS?

To add your Dahua device using the Amazon Alexa app:

Let’s assume that you’ve installed and configured your Alexa-compatible home security camera already and you have an Alexa-enabled smart speaker.

Now you need to log in to your Alexa app or make an account if you don’t already have one. Simply download the Alexa app and follow the prompts to sign in/register a new account.

Open the Alexa app and choose “Skills & Games” in the menu. Type “Ring” in the search box, open the skill, and choose “Enable.”

You’ll be asked to enter your Ring account credentials to pair your Ring account to the Alexa app.

 .

How to Download the DMSS Application?

The prefix “g” or “i” differentiate the applications intended for Android and iPhone/iPad and thus we will find them in the official Google Play and App Store:

Before, DMSS Plus was paid while you could get the Lite version for free. There are some differences between DMSS Lite and Plus such as E-Map (visual and functional installation plans), alarm management, and push notifications. Currently, there is no need to choose since Dahua has released the Plus version for free. In addition, this publication is already adapted to the new GDPR (General Data Protection Regulation).

 .

 .

Download Dahua DMSS software

View DMSS APP User Manual

 .

What Functions Do These Apps Offer?

The aforementioned applications have undergone several updates that improve their operation and increase their capabilities so sometimes it is difficult to follow all the news. Therefore, let’s see a summary of what they offer us for the management of our video surveillance devices:

Integration of Other Security Devices

The main novelty is managing DMSS CCTV devices, access control devices, and alarm systems from the manufacturer Dahua in a single app.

 .

Device Management

Among other options, they can be located within a local network (WiFi or LAN), and add devices via IP/Domain, DDNS, and P2P (Easy4IP and Lechange). This last option allows you to add devices by scanning the QR code and even a complete list of devices, very useful for migrating from the Lite app to the Plus version in a single operation.

 .

Live View and Playback of Recordings and Stored Clips

Live, to access and capture live video from added devices, combining channels and cameras. Playback, to consult, capture, cut, and extract the recorded videos. In addition to that, clips and captures can be viewed from the smartphone’s memory.

 .

Channel Configuration

It allows you to modify the coding (image resolution and ratio), image adjustments, PTZ or motorized zoom camera movement control, two-way audio communication with the device, and quadrant display, as more interesting functions.

 .

Notifications and Events

Detection events generated by devices are listed and notified in the app through push notifications. These consist of instant and free alerts supported by the devices and to which we can easily subscribe, depending on the type of detection selected.

 .

Cloud Recording, Cloud Storage Services

Upcoming updates will enable cloud video recording under a subscription service, with per-channel rates for 3, 7, or 30-day recording, and only for cameras that support such functionality.

 .

You can also check:

Best CCTV Brands in the UK

 .

 .

How to See Your Dahua DMSS Security Cameras from the Cell Phone

DMSS is Dahua ‘s free software to connect to your equipment from smartphones. It is used to connect to all current Dahua manufacturer equipment: DVR recorders, HDCVI, NVRs, IP cameras, etc.

This App can be downloaded for free in both the Play Store and the App Store. The Android version is called gDMSS and the iPhone iOS version is called iDMSS.

To connect your Dahua device via P2P on your cell phone, you are going to need:

 .

How to Configure Your Dahua Security Cameras in DMSS

Enter the SN of the device and touch the “Next” button.

Once all the boxes are completed, tap the “Save” button that is located at the top right.

If you followed the steps correctly, it should start viewing your security cameras live. By tapping the back button at the top left, you can return to Start.

 .

How to View Your Dahua Cameras in DMSS

If you followed the steps correctly, you should start viewing your security cameras live.

 .

 .

 .

The red numbered buttons:

 .

The Yellow numbered buttons:

 .

 .

Conclusion

As we saw, you know about DMSS App & can set up Alexa on your camera easily, just you need to go to the menu and tap Skills. Find the relevant skill (some cameras have specific apps for the cameras, outside of their main smart home apps). Enable the skill and link the account with Alexa. It’s a simple thing to set up and it means that you can create a security monitor without ever firing up your smartphone or tablet. All you need is one of the three Amazon devices noted in the intro and a compatible DMSS camera.

Here are some of the benefits of using wireless IP cameras:

However, there are also some drawbacks to consider:

.

Deep Dive into Wireless IP Cameras: Advantages and Considerations

Wireless IP cameras offer a compelling solution for home and business security, providing the benefits of traditional IP cameras with greater installation flexibility. Let’s delve deeper into the advantages and considerations when choosing a wireless IP camera system.

Advantages:

Considerations:

By understanding these advantages and considerations, you can make an informed decision when selecting a wireless IP camera system that perfectly caters to your specific security needs.

.

Add device

Video：

Hiseeu Wireless PTZ Camera Guide v1

Read Also : The Ultimate IP Camera Guide v3

1, It makes a beep after reset the camera, open the App, click “+ Add camera” –scan QR-code on the camera.

2, Click “Device light is blinking”—Next, then connect your home wifi.

3, Select your home wifi (the camera only support 2.4Ghz wifi, not support 5Ghz), click “next”.

Note: The wifi name and password don’t including special character and the wifi password don’t over 12 character.

You will get a QR code on your mobile phone, aim the QR code of the mobile phone at the camera lens at a distance of 4-5FT.

when you hear the prompt voice, click the blue button below, wait for device to connecting successfully, then edit the device name.

Add device with network cable

1.Please using the network cable connect camera to your router, then click “other ways to add”—More ways to add–select “LAN scan”.

2.It will search device automatically, when find device, click Add. You don’t need to input any password, just click “Confirm” on upper right corner.

3.After add successfully, please click setting icon–click Advanced settings.

4.Connect new WiFi–select your home WIFI and input password–Confirm. Then unplug network cable.

Add Device Via Camera Hotspot

1, Please click “Add camera”—other ways to add—Connecting camera hotspot to add.

2, Check “Device light is blinking” and click Next, then connect your home wifi, and click Next again.

3, Click “Go to settings” to connect camera hotspot, find hotspot IPC*********, input password”11111111”.

It doesn’t matter if it showing not network, just click ok, then go back to app.

4, Finally, wait for device to connecting successfully, then edit the device name.

The camera often offline

1, Check whether the camera antenna is vertically upward.

2, please confirm the distance between the camera to your router, it better within 30FT, if the distance too far, the camera will offline.

3, If still offline, please give your camera version, we will give you a firmware to upgrade camera, it can enhances the camera’s signal.

Camera can’t connect to wifi

1, please confirm wifi is 2.4G or 5G, the camera only support 2.4G. And wifi password cannot exceed 12 characters.

2, if it is 4G wifi, please place the camera next to the router, then press the reset button for 6 seconds to add device again.

3, or you can connect the camera to your router with network cable, then switch to wirelessly connection.

How to using PTZ function on NVR?

1, please left click your mouse, you will see a smart menu below, click PTZ control.

2, click the arrow direction to move the camera.

Please note, if your camera is digital camera, you can’t zoom in or out in this interface, it only suit for optical zoom camera.

You need to go back to main menu, left click mouse again, click zoom in, then roll you mouse to zoom in.

but when you zoom in, the camera image will blur.

How to share the device to other one?

a, Please go to the app–click “Share” icon–select permission and effective time.

b, after click complete icon, you will get a QR-code.

Please note that another phone must first download the application “esecloud” and then register a new account. One account cannot log in to two mobile phones at the same time.

Unable to hear camera sound

If “x” is displayed on sound option, it is not turned on, you need to turn on first.

If still can’t hear sound, please go to setup interface—recording settings—verify that the “Record Sound Switch” option is enabled.

How to connect the camera to Alexa?

 This is the link about how to connect the camera to Alexa, please refer it.

https://www.amazon.com/vdp/02b7820dd64d4ad6a457fcfd8638e830?ref=dp_vse_ibvc1

.

If Alexa showing “Live view not supported”, please don’t worry, this is Alexa app issue,

Actually it can view camera on Echo Show. Write your article here

How to setup motion tracking

If you add camera to NVR, please go to video detection to check whether your nvr support motion tracking.

Usually, NVR not support motion tracking, you need to add camera to the app Eseecloud, then add to NVR, so that you can setup motion tracking on the app.

1, Into device—click setting icon on upper right corner—go to smart detection alarm—enable motion tracking option.

How to set preset position cruise

1, go to setting interface—ptz control—cruise mode—select preset position cruise.

2, go back to record interface–click Preset–add more than two different positions–go to More–click cruise.

After setting successful, the camera will cruise within the preset position range.

Camera not recording after install SD card

1, Please go to setting interface–Storage setting–local storage space–check the status of the SD card.

2, SD card is in normal status, please check if SD card capacity is full, and then format the SD card.

3, If showing no SD card, please take the SD card out and insert it again. (Please keep the power off before inserting the SD card)

Alexa not skill Eseecloud

1, Please check if you have enable Alexa option on the app, click setting icon, advance settings, Alexa service authorization.

2, you need to login Eseecloud account with phone number or Email address, If you use third-party software to log in to Eseecloud, such as Google, you cannot log in to Eseecloud on Alexa

Please note, If Alexa can not find camera, please check if you have setup a name for camera.

Eseecloud Cloud Service Fee Standard

upgrade the ptz camera to new version.

We have upgrade our ptz camera version, you can scan the QR code to add the device without connecting camera hotspot.

and you can add the camera to nvr directly, don’t need to input password.

1) connect the camera to the same network as your computer with a network cable, then download a tool to search your camera IP, copy firmware to your computer. this is the link of tool.

http://download.dvr163.com/tool/IPCamSuite-1.2.26.8.zip

after you dowaload the tool successfully, please open it and click refresh to find the camera ip. upload the firmware and click upgrade. Write your article here

 please note, when upgrading the camera, please do not unplug the power or reset the camera, otherwise the camera will crash.

if you want to upgrade your camera version, please email johnny@hiseeu.com to get a upgrade firmware.

Fixed-point cruise on NVR

1) Right click the mouse–system setup–channel setup–PTZ setup. select correct channel. Add first cruise point,

2) click add to set first position (the default is 1, which does not need to be changed),

3) then click preset box select 2–add, add multiple cruise points in this way. You also can select “keep time” you want, preferably in five seconds or more.

4) And then click “?” question mark into the PTZ control interface–click PTZ control option to set first position, then click store.

5) change the preset box to 2, adjust the camera lens to second position–store

6) right click anywhere –return to the PTZ setting interface–apply—ok.

After connect to mobile phone, camera showing “wrong password” on NVR.

If you are adding camera to your mobile phone through camera hotspot , it will generate a random password.

1, Go to app Eseecloud, click three points icon on right upper corner, click edit. Fast click 6 times on blank area,

you will see random password.

2, Go to NVR, right click mouse—video manage—manial edit.

3, select channel—input random password, click ok,

If still showing connecting fail, please click match code to match camera.

The camera will turn to the wall or the ground

1. Please confirm whether to manually rotate the camera lens. If so, the camera will not return to its original position after restarting or automatic tracking.

please unplug the power adapter, then plug it in again, click PTZ on the mobile app or NVR to control the camera lens.

2. If you do not turn the camera manually, please tell us your camera ID number and version information, and we will feed back to our technical support.

.

I’ve wanted to make this list for a while, and hopefully it will help answer some simple questions or guide newcomers on their IP video quest. Feel free to add, change, or refine this!

 .

Most Popular Camera Manufactures (on this forum):

ACTi (http://www.acti.com) – Midrange camera – good price – free software.

Avtech (http://www.avtech.com.tw) – Has good ‘push’ support for events to mobile devices.

Avigilon (http://www.avigilon.com) – Similar to Axis cost – must buy through dealer – good software/support.

Axis (http://www.axis.com) – Popular choice – higher end cameras get expensive – easy to find online for sale – free + paid software options.

Dahua (http://www.dahuasecurity.com‎) – Re-branded as Q-See – low price – difficult to find updates/support.

Geovision (http://www.geovision.com.tw‎) – Midrange – have some LPR cameras.

Grandstream (http://www.grandstream.com) – Low cost – have some unique features.

Hikvision (http://www.hikvision.com‎) – Becoming more popular – re-branded as Lorex/Swann systems from Costco.

IQinVision (http://www.iqeye.com) Midrange pricing.

Mobotix (http://www.mobotix.com) – Cameras made in Germany – reliable but expensive – no moving parts to fail in their cameras.

Vivotek (http://www.vivotek.com) – Midrange pricing.

 .

Other Camera Manufactures:

Arecont (http://www.arecontvision.com/‎)

Brickcom (http://www.brickcom.com/)

Bosch (http://www.boschsecurity.us/en-us/ProductInformation/Cameras/NetworkCameras/)

Canon (http://www.usa.canon.com/cusa/professional/products/security_video_solutions/network_cameras)

GE (Unknown Website Address)

Honeywell (http://www.honeywellvideo.com/products/cameras/ip/index.html)

JVC (http://pro.jvc.com/prof/attributes/category.jsp?productId=PRO5.2)

Panasonic (http://www.panasonic.com/business/psna/products-surveillance-monitoring/index.aspx)

Pelco (http://www.pelco.com/sites/global/en/home.page)

Samsung (https://www.samsung-security.com/)

Sony (http://pro.sony.com/bbsc/ssr/mkt-security/)

Toshiba (http://www.toshibasecurity.com/)

 .

IR Illuminators:

Raytec (http://www.rayteccctv.com/)

Axton (http://www.axtontech.com/)

Iluminar (http://www.iluminarinc.com/)

+Other Generic Brands

 .

Accessories:

PoE Switch (Unmanaged, or Managed which allows remote powering on/off of specific ports) (TRENDnet, Netgear, D-Link, Cisco, Axis, etc.)

Ethernet Cable (Regular/Burial Grade)

Lenses (C/CS/S/D Mounts)

IR Illuminators (Discussed Above)

Enclosures (Pelco, Videolarm, Axis, Generic Brand, etc.)

PIR Sensor (Optex, Bosch, etc)

UPS Battery Backup System

 .

Popular Places To Buy:

[Redacted – do a search on the forum for general ideas ]

 .

Video Recording Software:

ACTi VMS (Free) – Only supports ACTi Cameras.

Avigilon (Per channel: Core ~$100, Standard ~$200, Enterprise ~$350) – Purchase through authorized dealers.

Axis Camera Companion (Free) – Only supports certain (newer) Axis Cameras. 16 cameras max.

Axis Camera Station (~$90/license)

Axxon Next (Free for 16 channels) (http://www.axxonsoft.com/products/axxon_next/)

BlueIris ($29.95 – $49.95) (http://blueirissoftware.com/) – Supports a large variety of network cameras.

exacqVision ($50 – $150/license + $25 yearly for optional updates)

Genetec (Expensive)

Geovision (Free)

Luxriot ($99 – $1000+)

Milestone XProtect (Free – $1000+)

Mobotix Control Center (Free) – Supports other cameras for viewing. May be able to record with MXServer.

OnSSI (Unknown)

Vitamin D (Free/$49/$199) (http://www.vitamindinc.com/index.php) – PC + Mac Compatible

Zoneminder (Free) – Open source Linux software.

…Etc, Most Manufactures Provide Their Own Software.

 .

Network Video Recorders (NVR’s)/NAS Stations:

Synology (1 License Included – ~$50 /per additional license)

Dahua

QNAP

Luxriot

NUUO

Hikvision

 .

iPhone Viewing Apps:

Netcam Viewer (Free/$5.99) (http://bit.ly/18UfXMs)

Live Cams Pro ($1.99) (http://bit.ly/19RAleQ)

QCamPro ($7.99) (http://bit.ly/14iCWxR)

Official Mobotix (Free) (http://bit.ly/15XNtmo)

IP Cam Viewer Pro ($3.99) (http://bit.ly/10QAwYn)

Dahua iDMSS Lite (Free) (http://bit.ly/110ZjmV)

Dahua iDMSS Plus ($4.99) (http://bit.ly/12FyWpw)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

 .

Android Viewing Apps:

IP Cam Viewer Pro ($3.99) (http://bit.ly/TG6OyB)

Dahua gDMSS Lite (Free) (http://bit.ly/12zjvAs)

Dahua gDMSS Plus ($5.00) (http://bit.ly/12FzfAA)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

The Ultimate IP Camera Guide v3.

Review Sites/Sample Videos:

Network Camera Critic (http://www.networkcameracritic.com/)

Mateusz CCTVnerd (http://www.youtube.com/user/mateuszfen)

Megapixel Cameras – Images and Demos (viewtopic.php?f=19&t=11322)

Plazor (http://www.plazor.com)

Axis YouTube Channel (http://www.youtube.com/user/AxisCommunications)

Avigilon YouTube Channel (http://www.youtube.com/user/Avigilon)

MXInstaller (http://www.mxinstaller.com/)

 .

Companies That Rebrand/Resell:

Swann (Rebrands Hikvision Equipment)

Lorex (Rebrands Hikvision Equipment)

Q-See (Rebrands Dahua Equipment)

Toshiba (Appears To Rebrand Vivotek)

Cisco (Sometimes Rebrands Pelco)

 .

Other Helpful Links:

CCTV Lens Calculator (http://www.jvsg.com/online/#)

Identification And Recognition Guide (http://www.axis.com/academy/identification/index.htm) – Make sure you have the correct resolution for your application.

Security Today – IP Cameras (http://security-today.com/directory/list/ip-video.aspx)

CCTV Frame Rates Comparison (

) – Recordings don’t necessarily have to be 30fps for desired results.

IP Video 101 Training (http://ipvm.com/report/ip_video_training_course_101)

 .

Live Demo Cameras:

Mobotix Cameras (http://www.mobotix.ro/live-ro-p-3.html) or (http://comsurv.com/live-video-cameras/)

Axis Cameras (http://www.axis.com/camerademo/) or (http://ipcameralive.com/)

Mixture (http://camelive.info)

 .

Terminology:

CBR: “Constant bit rate [encoding] means that the rate at which a codec’s output data should be consumed is constant.” (i.e. the amount of data flowing from camera to user/nvr is always constant – even during movement or lack thereof. [See also VBR])

DSD: (http://www.dsdcctv.com/)

DVR: “a consumer electronics device or application software that records video in a digital format to a disk drive, USB flash drive, SD memory card or other local or networked mass storage device.”

Edge Recording: “The concept of taking audio/video from a camera, and storing it at the edge of the Ethernet network instead of transporting it across the network to a centralized recording facility such as a Network Video Recorder.” (Most cameras have this ability now.)

IR/IR Illuminator: LED’s (often a separate device) which provide illumination for cameras in near to total darkness. The light produced cannot be seen by the human eye. The camera must be sensitive to IR for this to be useful (some cameras have ‘fixed’ IR cut filters). ‘White light’ illuminators are also available. These produce light visible to the human eye and to a camera with or without an IR cut filter.

LPR/ANPR/AVI/CPR/LAPI: “A mass surveillance method that uses optical character recognition on images to read vehicle registration plates.”

NAS: Basically a box filled with hard drives for storage of data. Some cameras have the ability to record directly to these networked boxes without the need for an always on or dedicated computer.

NVR: “A software program that records video in a digital format to a disk drive, USB flash drive, SD memory card or other mass storage device.”

ONVIF: “Open Network Video Interface Forum (ONVIF) is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products.”

PIR: Passive Infrared “is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.”

PoE: “A system to safely pass electrical power, along with data, on Ethernet cabling.”

UPS: “uninterruptible power supply…is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.”

VBR: “Variable bit rate files vary the amount of output data per time segment.” (i.e. Less data during still scenes, more data during high movement periods.)

WDR: “‘Wide dynamic range’ describes an attribute of an imaging system which can capture greater scene details from shadows to highlights than normal.”

 .

Commonly Asked Questions:

Q: “Which brand or manufacturer should I buy?”

A: Each brand has its strengths and weakness, whether it be price, size, low light capabilities, resolution, frame rate, support, software, compatibility, etc. There really isn’t one magical brand or camera. Each security scenario is different and requires a unique solution.

 .

Q: “Where can I buy an IP HD PTZ Outdoor Camera for $200?”

A: Probably not going to happen. PTZ cameras are expensive because of all the motors, belts, gears, and such. Perhaps instead consider using several fixed multi-megapixel HD cameras instead for coverage.

 .

Q: “How do I embed/add video from a camera to a website?”

A: See: http://www.networkcameracritic.com/?p=1290 or http://bit.ly/10rC8WV

 .

Q: “How do I view my cameras on my TV/Monitor?

A: Consider using an Android powered HDMI dongle. These mini computers are powerful and compact enough to be attached to a TV or monitor for camera viewing using an Android app. Also see: http://www.networkcameracritic.com/?p=1049

 .

Q: “Should I buy a Foscam?”

A: These cameras are not typically discussed here because of their poor reliability and feature set. They are often cloned and copied making firmware updates and support hard to come by. So in short, probably not. However if you are just starting with IP cameras, many members have since upgraded from these over time to bigger and better.

 .

Q: “How do I view my camera(s) from the internet?”

A: You need to setup your router for port forwarding. Here are several guides to assist you. See: http://www.networkcameracritic.com/?p=124 or http://bit.ly/184DTvf

 .

Q: “What shutter speed should I use during low light/night?”

A: “Typically 1/30 of a second is as low as you would want to have it set. Any longer and moving objects will be blurry making the footage less then useful.

 .

Q: “Should I use a wireless camera for my application?”

A: Wifi signals, especially at long distances, can drop or become unreliable. They also become targets of hacking “resulting in free access to your personal cameras (EXTREMLY DANGEROUS) or blocked cameras, ones that will not record anything.” It is best to use a hardwired connection via cable for installations. PoE installation can supply signal and power over one cable for easy installation. If a cable is not an option consider using a dedicated wifi access point, like the type made by Ubiquiti Networks.

Technical Guide to IP Cameras– Overview, Types, Applications

.

An IP camera (Internet Protocol Camera) is a type of security camera that receives video data and sends video footage via an IP network. It is also known as network camera or IP security camera, often used as remote monitoring and management tools in many sectors and environments to protect the property or monitor home, business, or public security. Connected with other devices such as network video recorders and displays via a network, IP cameras allow you to monitor specific areas from any remote location, bringing much convenience to our daily lives.

How Does An IP Camera Work?

IP cameras work the same way as digital cameras to capture high-quality images. What sets them apart is the capability of IP cameras to compress those files and automatically transmit them to a network video recorder (NVR) via a network. Usually, IP cameras are connected to the network via ethernet cable with a broadband modem or router, or wirelessly via a Wi-Fi router.

In a building that has already been equipped with a network, all you have to do is to connect the IP surveillance cameras and other devices into your network system, just the same way that you would do when you connect your laptop or cell phone to your Wi-Fi.

After everything is well connected, the cameras can start working, capturing and sending video footage to the network video recorder.

Four Common Types of IP Camera

There are various video surveillance solutions, in which many different types of security cameras are adopted. Among those surveillance cameras, there are four most commonly used ones, dome cameras, bullet cameras, and turret cameras. Knowing more about the differences among dome vs bullet vs turret vs fisheye cameras will help you find out the one that fits you most.

Four Important Specifications of IP Cameras

When looking for a security camera, not only should you decide on the type of it, but also you need to notice that the specifications can make a huge difference. There are four of the most essential specifications.

Resolution

The resolution of IP cameras is the total number of pixels that make up an image, which is usually measured by the width and height of the image. The most common resolutions of security cameras are 720p, 1080p, 5MP, 4K and 8MP. Usually, higher resolutions mean that there are more pixels per inch (PPI), resulting in a high-quality, crisp image.

Field of View

The lens of an IP camera allows you to frame an area that you want to spot. Different lens systems come with different fields of view, which determines how wide an area you can see. A wider field of view will allow the camera to spot a larger area. Typically, for a large parking lot and a small room, you will need lenses with different viewing angles.

Focal Length

The focal length of a lens, which is measured in “mm”, determines the angle of view and how far the camera can see. There are two types of lens, fixed lens and varifocal lens. The most common fixed focal length is 3.6mm, which leads to a 90° view angle and a distance of 20 feet. There is also 8mm lens with a 40° view angle and identification distance of 40 feet. For varifocal lenses, the most common ones are 2.8-12mm lenses.

At 2.8mm you get around 100° view angle, with only around 10-feet identification distance. At 12mm you will achieve around a 30° angle of view and identification at around 50 feet. The wider the focal length, the further away it can focus and the narrower the field of view.

Low Light Sensitivity

Low-light sensitivity, usually measured in Lux(lx), refers to the ability of a camera to provide high-quality images even in low-light conditions by presenting details and reducing noise in the output images. There are few factors contributing to the low light performance of a camera, including pixel size, signal-to-noise ratio, lens aperture, etc. A lower Lux has the ability to present high-quality images in darker areas. For example, cameras with 100-1,000lx are applied to record under work-space light, while cameras with 0.0001lx are usually adopted for moonless nights or overcast nights.

Most Popular IP Camera Applications

Home Use

For those looking for tools to get close with their families, monitor family security or protect family property, IP cameras are always a go-for item. Many homeowners equip their families with a video surveillance system to make themselves and their families feel safer.

The IP cameras installed in home security systems have been used to serve a number of purposes. For example, they can be installed near the front door to capture the image of each one who steps into or sneaks around the house, or installed in the backyard to catch a view of their families’ happy moments, or installed inside the room, to make sure their baby is being well taken care of, etc.

Business Use

Commercial security cameras are often used in business buildings, supermarkets, shops, restaurants, etc. For business owners, security cameras can not only protect their property to ensure normal operations and prevent criminal acts with real-time monitoring, but also can keep them connected with daily operations and employee safety.

Outdoor perimeter security can also be maintained with video surveillance solutions to monitor the surroundings. Compared to traditional systems, commercial IP video surveillance systems offer greater reliability and security with built-in encryption, data compression, network connection, and cybersecurity measures.

Public Safety

Surveillance cameras play an important role in managing public rules, protecting public safety and property. It’s not difficult to find that there are plenty of monitoring cameras along the traffic roads, parking lots and around the governments or hospitals. Moreover, there are lots of public areas deployed with security cameras, including schools, parks, communities, neighborhoods, etc.

Conclusion

IP cameras have become a dispensable part of home, business or public surveillance systems. With the proper video management software, the video recorded by IP cameras can be viewed from anywhere worldwide via the network, whether using a laptop or a mobile phone. In many cases, IP cameras can also be controlled remotely, adding much convenience to our lives.

There are various types of security cameras that are designed for specific applications, and that’s why you need to take several factors into consideration when purchasing IP cameras for your security system. Before the next step, it would be better to figure out your budget and your requirements first.

Guide to Understanding IP Cameras

Welcome to a venture into the captivating digital world of Internet Protocol (IP) cameras. Whether you’re considering investing in this game-changing technology or you’re simply eager to boost your tech acumen, we’ve got your covered. Untangling complex technical jargon and translating it into simple language, this blog post will chart your course through the depths of understanding IP cameras.

What is an IP Camera?

An IP camera , also known as a network camera, is a digital video tool that sends and receives data via the internet. Unlike its analogue predecessor, the CCTV (Closed Circuit TV), it offers the functionality to view live or recorded footage from anywhere, anytime using a web-based platform or mobile application. Think of IP camera as the digital evolution.

Advantages of the IP Camera

.

Understanding IP Camera Operation

Let’s dive deeper into how these fantastic little devices work.

Capturing Images

The essence of an IP security camera is in its lens, sensor, and processor. The lens focuses on the light emanating from the surroundings, which then hits a digital sensor. This sensor transforms the received light into an electronic signal that the processor can turn into a digital video stream.

Sending Images

The key difference between an IP camera and previous systems lies in its ingenious use of the Internet Protocol. Instead of sending unprocessed data to a recorder, IP cameras encode and process the signal on the device before transmitting it to be stored or viewed over the network. This reduces the workload for the recorder, enhancing the system’s efficiency.

.

Most Popular Types of IP Cameras

Not all IP cameras are created equal, of course. Different styles suit different needs. Here’s a quick classification of the most commonly used types:

Bullet Cameras

These are named for their cylindrical shape, resembling a bullet. Bullet cameras are great for monitoring both wide focused areas such as entrances or small rooms.

Dome Cameras

Identified by their dome shape, these cameras provide a wider viewing angle ideal for bigger spaces like living rooms or stores.  Some come with adjustable lenses to hone in on important areas.

PTZ Cameras

PTZ stands for Pan-Tilt-Zoom. A PTZ IP camera provides the functionality to remotely control the movement and zoom of the camera, making it perfect for large, open spaces.

.

IP Camera Installation: Tips and Tricks

Installing an IP camera isn’t rocket science. Here are some friendly tips to ensure you obtain the best surveillance results:

.

Securing Your IP Camera

In an increasingly digital world, security is paramount. Here are a few guidelines to secure your IP camera system:

Change the Default Password

On purchase, devices often come with generic login credentials. It’s essential to change these immediately to a unique and complex password.

Regular Firmware Updates

Stay up-to-date with the latest firmware version provided by the manufacturer. This ensures your device is protected from any known loopholes.

Effective Network Security

Ensure your home or business network security is robust. Use established security measures such as firewalls and secure Wi-Fi protocols.

The captivating world of IP cameras offers the potential for superior surveillance solutions. The charm of hands-on control combined with the convenience of remote access can revolutionize how we approach security. Yet, it is crucial to remember that with great power comes great responsibility. In this digital age, securing our devices should always be a priority. Embrace the technology but don’t forget to keep it secure. Welcome to the future of surveillance.

Lorex was the first to market 4K resolution security cameras and more recently released the Fusion Collection, which offers recording for both wired and wireless cameras.

.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cloud App. Refer to the Lorex Cloud App Product Compatibility Chart for a list of compatible recorders.

.

Changing Your Password via Your Recorder

.

Retrieving your device ID

Lorex Devices Password Reset Detailed Guide.

Changing or Resetting Your Recorder’s Password

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex App. Refer to the Lorex App Product Compatibility Chart for a list of compatible recorders.

.

Table of contents:

.

Change or Reset Your Recorder’s Password Through the Lorex App

.

Change Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (New Local UI)

.

Change Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

.

Change Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cirrus App. Refer to the Lorex Cirrus App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Cirrus App

Note: You cannot reset your password with the Lorex Cirrus App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Cirrus App.

1.Tap the  icon in the top left corner of the Lorex Cirrus app.

2.Select Devices.

3.Tap Edit under your desired recorder.

4.Tap Change Password.

5.Fill in the required fields as follows:

.

Changing Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

.

Resetting your Password

1.Login to your system using the reset password.

2.From the Live View screen, click >  Setup > User.

3.From the list of accounts, find the row for the account you want to update and click 

This password will be used to connect to your system from now on.

.

Resetting Your Password (LHA / LNK Series)

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Pro App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Pro App. Refer to the Lorex Pro App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Pro App

Note: You cannot reset your password with the Lorex Pro App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Pro App.

1.Tap the ellipses (…) above your desired recorder in the top right corner of the app.

2.Tap Device Settings.

3.Tap  in the top right corner of the Device Settings page.

4.Tap Modify Device Password.

5.Fill in the required fields as follows:

.

Changing or Resetting Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

How to Reset Your Password

There are different processes to reset your password for different types of Lorex products or accounts.

Please select the type of password reset you need:

How to Reset Your Lorex App Account Password

Please note that your Lorex Account and Lorex App account email and passwords are the same. Changing one will automatically change the other.

There are two ways to reset your Lorex App password:

Method 1: App

1. Click Forgot Password on the main app Login screen.

2. Enter your email, a new account password, and click Get Activation Code.

3. Enter the 6-Digit Verification Code sent to your email and click ok.

Method 2: Website

1. Click Recover Password from the Lorex Login page

2. Enter your email address associated with your Lorex Account and click Recover

3. Check your email for your Verification Code.

4. Return to the Recover Password page and input your email address, new password, and verification code that you received.

5. Click Reset and then login using your new credentials.

Further Support

Resetting Your Lorex App password

Resetting Your Lorex Account Password

How to Reset Your NVR or DVR’s Password

Please follow the steps for the app associated with your Recorder

Lorex Recorders Using the Lorex App, Lorex Cirrus App or Lorex Cloud App

Request a temporary password from the website to reset your recorder’s password:

Note: It is necessary to register your product for warranty to request a temporary password for your Recorder.

1. Login into The Warrany Section of Your Lorex Account:

2. Register Your Warranty:

3. Reset Device Password:

4. Use Your Temporary Password:

Further Support

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

.

Support Hours Eastern Time:

Mon to Fri: 10:00AM – 9:00PM

Sat & Sun: Closed

How to Locate Your Recorder’s System Information

To complete the temporary password request form on the website, please gather the following information:

System Date: Located in the top-right corner of the screen once the recorder is powered on.

Device ID: Located on the QR code sticker attached to the outside of your recorder.

Device Model: Located in the INFO section from the Quick Menu of your recorder (the device ID can also be found here).

Once you have the Device ID at hand, please take a picture of the Device Info screen and the sticker with the serial number found on the unit.

.

How to Reset Your Smart Home Camera’s Password

To ensure your privacy and prevent any unauthorized attempts to gain access to your camera, there is no way to reset your smart home camera’s password. The camera will have to be reset to its factory default.

How to restart or factory reset your IoT Device:

Further Support

Wi-Fi Security Camera – How to reset your device

How to Reset Your IP Camera’s Password

If you have forgotten the password to one of your IP security cameras, you will either need to reset the camera manually. Please see your camera’s documentation to see if there is a reset button.

Reset Button:

If your IP Camera includes a reset button, you can hold the button down to revert it to its default setting. This will allow you to set up the camera again through your NVR with a new password.

Wi-Fi Security Camera – How to change password

We recommend using strong passwords for the Lorex App app and all cameras connected to it, and changing them on a regular basis.

This guide applies to the following products: W281AA, W282CA, W261AS, W261AQ, LNWDB1, and V261LCD.

.

How to change device password

Here’s how to change the password of your camera.

Step 1. Launch the Lorex App app, and tap Device Settings.

Step 2. Tap the Name of your device.

Step 3. Tap Device Password.

Step 4. Enter your Old Password, followed by the New Password, Confirm Password, and tap the Save icon.

NOTE: You’ll get a prompt that you’ve sucessfully updated your device password.

.

How to change Lorex App account password

Here’s how to change the password of your Lorex App account.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Tap Change Password.

Step 5. Enter your Current Password, followed by the New Password, then tap Done.

NOTE: You’ll get a prompt that you’ve sucessfully updated the password of your Lorex App account.

You’ll also be loggged out automatically. You must re-login using your new password

.

How to enable or disable fingerprint login

If your smartphone supports fingerprint login, you can use it to sign in to your Lorex App.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Toggle Fingerprint Login button to ON (to enable it) or OFF (to disable it).

.

About this Document

Safety Instruction

.

●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the device and shall be easily accessible.

●For the device with the sign  indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.

●Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Do not ingest battery. Chemical Burn Hazard!

●This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

●Use only power supplies same with the original model, or LPS power supplies with the same voltage and electric current.

Preventive and Cautionary Tips

.

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.

●The device shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

●No naked flame sources, such as lighted candles, should be placed on the device.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains. The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.

● identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

● + identifies the positive terminal(s) of the device which is used with, or generates direct current, and – identifies the negative terminal(s) of the device which is used with, or generates direct current.

●If the device has been powered off or placed for a long time, its coin/button cell battery may run out power.

●When the coin/button cell battery runs out power, the system time would be incorrect, please contact the after-sales service to replace the battery.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Do not touch the sharp edges or corners.

●When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to make the HDD temperature in S.M.A.R.T. below the stated value.

●Provide a surge suppressor at the inlet opening of the device under special conditions such as the mountain top, iron tower, and forest.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.

●The serial port of the device is used for debugging only.

●If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure.

●If a power adapter is provided in the device package, use the provided adapter only.

●For the device with sticker or , pay attention to the following cautions: CAUTION: Hot parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching off before handling the parts.

●If the device needs to be installed on the wall or ceiling,

1.Install the device according to the instructions in this manual.

2.To prevent injury, this device must be securely attached to the installation surface in accordance with the installation instructions.

●Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power adapters may decrease.

●Make sure that the power has been disconnected before you wire, install, or disassemble the device.

●If the device needs to be wired by yourself, select the corresponding wire to supply power according to the electric parameters labeled on the device. Strip off wire with a standard wire stripper at corresponding position. To avoid serious consequences, the length of stripped wire shall be appropriate, and conductors shall not be exposed.

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Hikvision New GUI 5 User Guide

Content Convention

.

In order to simplify description, please read the following conventions.

.

.

.

Reason

Solution

.

Note

If your video recorder notifies not support this function, you can log in to the camera, and adjust video parameters via web browser.

.

Reason

The camera password is too weak.

Solution

Change the camera password.

.

.

Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

.

.

.

Reason

The camera encoding format mismatches with the video recorder.

If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/ MJPEG, change the camera encoding format to the same as video recorder.

.

.

Solution

Check if the encoding type at live view toolbar is H.265.

.

.

Reason

The video recorder uses the same IP address as other devices.

Change the IP address of video recorder. Ensure it is not the same as other devices.

.

Intelligent Operation – Smooth UI experience

Intuitive live view

• Check the real-time channel status clearly

• With customized views, live views can be more intuitive on one view layout and enable automatic switching to meet the needs of multi-screen timed switching

The conventional video searching methods usually are time-consuming. Right now, the Smart Search and the AcuSearch functions could help accelerate searching efficiency in minutes, even in seconds.

Smart Video Searching

The NVR 5.0 with converged functions provides support for video, audio, alarm, access control, and other application access. Creating intelligent applications for different scenarios and needs.

Herospeed Firmware Software Download

.

NVR

The Network Video Recoder support network video access,and it has adopted a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),embedded system technology,storage technology, network technology and intelligent technologies.It can work independently as NVR,or as a powerful security networking system.

.

.

NOVATEK IP Camera

The NT IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom.

NOVATEK IP Camera

.

Rockchip IP Camera

The RK IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ,HDR, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Rockchip IP Camera

Fullhan IP Camera

The Fullhan High-definition network camera has adopted embedded system and a number of advanced IT technologies,which integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Fullhan IP Camera

.

GK IP Camera

GK IP Camera uses an embedded system and a number of advanced IT technologies, such as audio and video encoding and decoding technologies (h.264, h.265, h.265+, H264+), integrated encoding and compression, supporting audio noise reduction, and response cancellation, Support humanoid detection, support full Netcom function, can realize plug-and-play access to the back-end.

.

GK IP Camera

.

XVR

The Embedded Hybrid Digital Video Recorder is compatible with HDTVI,AHD and other coaxial HD specification,which can be accessed to any HDTVI,CVI,AHD,analog and network signal.It can disable numbers of analog channels and convert them to IP channels,which have both functions of DVR and NVR.

.

XVR