How to factory reset Arlo devices

This article applies to:

FLW2001  AVD2001  AVD1001  AC2001  AAD1001  AC1001  SH1001  MS1001  VMB5000  VMB4540  VMB4500  VMB4000  VMB3500  VMB3000  VMB3010  ABB1000  ASB1001  VMC5040  VMC4040P  FB1001  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2040  VMC2030  VMC2032  VMC3060  VMC2060  VMC3050  VMC2050  VMC3052  VMC2052  VML2030  VML4030  VMC3040  VMC3040S  ABC1000

How do I factory reset and re-sync my Arlo camera? – Arlo Secure 4.0

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How do I factory reset and re-sync my Arlo camera?

Factory resetting your Arlo wire-free camera returns it to default settings and removes the camera from your account.

Factory reset a camera from your Arlo account

To factory reset your camera while it is connected to the cloud:

1.Launch the Arlo Secure App or log in to your Arlo account at my.arlo.com.

2.Tap or click Devices.

3.Tap or click on the camera you want to reset.

4.Tap or click .

5.Tap or click the Device Name.

6.Tap or click Remove Device.

7.Tap or click Yes to confirm that you want to remove the camera from your account.

8.Return to the Devices page.
Note: Make sure you are on the correct Location.

9.Tap or click .

10.Select your Arlo device.

11.Follow the prompts to reconnect your camera to your Wi-Fi network, Arlo SmartHub, or Base Station.

How to factory reset Arlo devices

Factory reset an Arlo camera with the Sync button

To factory reset your camera if it is offline:

1.Unmount your camera and find the Sync Button. The location of the Sync button varies for different camera models.
Arlo Pro 3, Pro 4, Pro 5S, Pro 3 Floodlight Camera, Ultra, Ultra 2, and Go 2:
Release the camera from the camera housing to access the Sync button:

2.Press and hold the Sync button for about 15 seconds, until the camera LED begins blinking Blue, then release the button.
Ensure the camera LED blinks Amber three times. The factory reset may take 15 to 45 seconds to complete.
Note: If you accidentally hold the Sync button too long (greater than 30 seconds), wait one minute, then try again.

3.Launch the Arlo Secure App or log in to your Arlo account at my.arlo.com.

4.Tap or click Devices.

5.Tap or click on the camera you want to reset.

6.Tap or click .

7.Tap or click the Device Name.

8.Tap or click Remove Device.

9.Tap or click Yes to confirm that you want to remove the camera from your account.

10.Return to the Devices page.
Note: Make sure you are on the correct Location.

11.Tap or click .

12.Select your Arlo device.

13.Follow the prompts to connect the camera to your Wi-Fi network, Arlo SmartHub, or Base Station.

14.If needed, insert the camera back into its camera housing until it clicks back into place.

How do I factory reset and re-sync my Arlo camera?

This article is for the Arlo Secure App with Library. If you have the Arlo Secure App with Feed, visit: How do I factory reset and re-sync my Arlo camera? – Arlo Secure 4.0

Factory resetting your Arlo wire-free camera returns it to default settings and removes the camera from your account.

Factory reset a camera from your Arlo account

To factory reset your camera while it is connected to the cloud:

Factory reset an Arlo camera with the Sync button

To factory reset your camera if it is offline or does not have battery power:

How do I factory reset my Arlo SmartHub or Base Station? – Arlo Secure 4.0

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How can I factory reset my Arlo SmartHub or Base Station?

WARNING:

To perform a factory reset on your Arlo SmartHub or Base Station:

To reconnect your Arlo SmartHub or Base Station to your Arlo account:

1.Launch the Arlo Secure App or log in to your Arlo account at my.arlo.com.

2.Tap or click Devices.
Note: Make sure the correct Location is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap or click .

4.Select Base Station/Hub.

5.Follow the prompts to reconnect your Arlo SmartHub or Base Station to your Arlo account.

How can I factory reset my Arlo SmartHub or Base Station?

This article is for the Arlo Secure App experience with Library. If you have the Arlo Secure App experience with Feed, visit: How can I factory reset my Arlo SmartHub or Base Station? – Arlo Secure 4.0

WARNING:

To perform a factory reset on your Arlo SmartHub or Base Station:

To re-add and set up your Arlo SmartHub or Base Station:

How do I factory reset my Arlo Wired Floodlight Camera?

This article applies to:

FLW2001

Factory resetting the Arlo Wired Floodlight Camera returns it to the default settings.

To Factory Reset the Arlo Wired Floodlight Camera:

1.Press and hold the SYNC Button on the camera for about 15 seconds.

2.Wait to ensure that the camera LED rapidly blinks amber after 15 seconds, then release the button.

3.Your camera is reset to the factory default settings.

4.Follow the instructions below to remove your camera from the Arlo Secure App and then re-add it to your Arlo system.

To remove the Arlo Wired Floodlight Camera from the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo Wired Floodlight Camera device card.

4.Tap .

5.Tap the name of your Arlo Wired Floodlight Camera at the top of the Device Settings screen.

6.Tap Remove Device.

How do I factory reset my Arlo Essential Outdoor Camera (2nd Generation)?

This article applies to:

VMC3050  VMC2050  VMC3052  VMC2052

Factory resetting your Arlo Essential Outdoor Camera (2nd Generation) returns it to default settings.

To factory reset the Arlo Essential Outdoor Camera (2nd Generation) using the device Pairing Button:

1.Press and hold the Pairing Button on the top of the camera for 15 seconds.

2.When the camera LED starts blinking amber, release the Pairing Button to trigger a factory reset.

To factory reset the Arlo Essential Outdoor Camera (2nd Generation) using the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Select the camera you wish to reset.

4.Tap .

5.Tap the Device Name.

6.Tap Remove Device.

7.Tap Yes to confirm.

To reconnect the Arlo Essential Outdoor Camera (2nd Generation) to your Arlo account:

1.Launch the Arlo Secure App.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

2.Tap .

3.Select Cameras > Essential Series > Essential Cameras 2nd Generation.

4.Follow the in-app instructions.

How do I factory reset my Arlo Essential Indoor Camera?

This article applies to:

VMC2040  VMC3060  VMC2060

Factory resetting your Arlo Essential Indoor Camera returns it to the default settings.

To Factory Reset your Arlo Essential Indoor (2nd Generation) Camera:

1.Press and hold the Pairing Button on the camera for about 15 seconds.

2.Wait to ensure that the camera LED rapidly blinks amber after 15 seconds, then release the button.

3.Your camera is reset to the factory default settings.

4.Follow the instructions below to remove your camera from the Arlo Secure App and then re-add it to your Arlo system.

To Factory Reset your Arlo Essential Indoor Camera:

1.Press and hold the Sync Button on the camera for about 15 seconds.

2.Wait to ensure that the camera LED rapidly blinks blue after 15 seconds, then release the button.

3.Your camera is reset to the factory default settings.

4.Follow the instructions below to remove your camera from the Arlo Secure App and then re-add it to your Arlo system.

To remove the Arlo Essential Indoor Camera from the Arlo Secure App:

For the Arlo Secure experience with Feed:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the Arlo Essential Indoor Camera device card.

4.Tap .

5.Tap the name of your Arlo Essential Indoor Camera at the top of the Device Settings screen.

6.Tap Remove Device.

For the Arlo Secure experience with Library:

To re-add your Arlo Essential Indoor Camera to the Arlo Secure App:

For the Arlo Secure experience with Feed, visit:

For the Arlo Secure experience with Library, visit:

How do I factory reset my Arlo Video Doorbell? – Arlo Secure 4.0

This article applies to:

AVD4001  AVD3001  AVD2001  AVD1001

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How do I factory reset my Arlo Essential Video Doorbell?

Factory resetting your Arlo Video Doorbell returns it to the default settings.

If the Arlo Video Doorbell is online, factory reset the device in the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap the device card for your doorbell.

4.Tap .

5.Tap the device name at the top of the Device Settings screen.

6.Tap Remove Device.

If the Arlo Video Doorbell is offline, factory reset the device using the reset button:

For the Arlo Video Doorbell (2nd Generation):

1.Locate the release pin that came with your Arlo Video Doorbell.
Alternatively, you can also use a paper clip or a similar object.

2.Press and hold the Pairing button on the back of the Arlo Video Doorbell for about 15 seconds.

The LED in front of the device flashes Amber when it successfully begins the reset process. After the reset is complete, the LED turns to blue and it is ready for pairing.

For the Arlo Essential Video Doorbell Wire-Free and Arlo Essential Video Doorbell Wired:

1.Locate the release pin that came with your Arlo Essential Video Doorbell.
Alternatively, you can also use a paper clip or a similar object.

2.Press and hold the Reset button on the back of the Arlo Essential Video Doorbell for about 15 seconds.

The LED ring around the doorbell button on the front of the device flashes white when it successfully begins the reset process.

After you factory reset your Video Doorbell, you must add it to your account again:

1.Launch the Arlo Secure App.
Note: Make sure the correct Location (where you want the Arlo Video Doorbell added) is selected.
For more information, visit: How do I switch my Location in the Arlo Secure App?

2.Tap  and select Add a Device.

3.Select Doorbells & Chimes.

4.Select your specific Video Doorbell model.

5.Follow the in-app instructions.

How do I factory reset my Arlo Essential Video Doorbell?

This article applies to:

AVD2001  AVD1001

This article is for the Arlo Secure App with Library. If you have the Arlo Secure App with Feed, visit: How do I factory reset my Arlo Video Doorbell? – Arlo Secure 4.0

Factory resetting your Arlo Essential Video Doorbell returns it to default settings.

To factory reset your Arlo Essential Video Doorbell in the Arlo Secure App if the device is online:

To factory reset your Arlo Essential Video Doorbell with the reset button on the device:

1.Locate the release pin that came with your Arlo Essential Video Doorbell.
Alternatively, you can also use a paperclip or a similar object.

2.Press and hold the reset button on the back of the Arlo Essential Video Doorbell for about 15 seconds.

Note: The LED ring around the doorbell button on the front of the device flashes white when it successfully begins the factory reset process.

To remove your Arlo Essential Video Doorbell from the wall mount, visit: How do I remove my Arlo Essential Video Doorbell from the wall mount?

How do I factory reset my Arlo Chime or Chime 2?

This article applies to:

AC2001  AC1001

Factory resetting your Arlo Chime or Chime 2 returns it to default settings. After the factory reset you will need to remove the device from the Arlo Secure App and then follow the in-app setup process to use your Arlo Chime or Chime 2 again.

To factory reset your Arlo Chime or Chime 2:

To remove the Arlo Chime or Chime 2 from the Arlo Secure App and add it back to your Arlo system:

For the Arlo Secure App with Feed:

For the Arlo Secure App with Library:

How do I factory reset my Arlo Essential Spotlight Camera? – Arlo Secure 4.0

This article applies to:

VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How do I factory reset my Arlo Essential Spotlight Camera?

Factory resetting your Arlo Essential Spotlight Camera returns it to default settings and removes it from your account.

Factory reset a camera from your Arlo account

To factory reset your camera while it is connected to the cloud:

1.Launch the Arlo Secure App or log in to your Arlo account at my.arlo.com.

2.Tap or click Devices.

3.Tap or click on the camera you want to reset.

4.Tap or click .

5.Tap or click the Device Name.

6.Tap or click Remove Device.

7.Tap or click Yes to confirm that you want to remove the camera from your account.

8.Return to the Devices page.
Note: Make sure you are on the correct Location.

9.Tap or click .

10.Select your Arlo device.

11.Follow the prompts to reconnect your camera to your Wi-Fi network, Arlo SmartHub, or Base Station.
Note: If your camera is Offline when you remove it, the camera will not be reset.

Factory reset an Arlo camera with the Sync button

To factory reset your camera if it is offline:

2.Press the Sync button for 1 second and wait for the camera LED to turn on.

3.Press and hold the Sync button for about 15 seconds, until the camera LED blinks Amber, then release the button. Ensure the camera LED blinks Amber three times. The factory reset may take 15 to 45 seconds to complete.
Note: If you accidentally hold the Sync button too long (greater than 30 seconds), wait one minute, then try again.

4.Launch the Arlo Secure App or log in to your Arlo account at my.arlo.com.

5.Tap or click Devices.

6.Tap or click on the camera you want to reset.

7.Tap or click .

8.Tap or click the Device Name.

9.Tap or click Remove Device.

10.Tap or click Yes to confirm that you want to remove the camera from your account.

11.Return to the Devices page.
Note: Make sure you are on the correct Location.

12.Tap or click .

13.Select your Arlo device.

14.Follow the prompts to connect the camera to your Wi-Fi network, Arlo SmartHub, or Base Station.

15.If needed, insert the camera back into its camera housing until it clicks back into place.

How do I factory reset my Arlo Essential Spotlight Camera?

This article applies to:

VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App with Library. If you have the Arlo Secure App with Feed, visit:  How do I factory reset my Arlo Essential Spotlight Camera? – Arlo Secure 4.0

Factory resetting your Arlo Essential Spotlight Camera returns it to default settings and removes it from your account. You must follow the Arlo Secure App setup process to use your camera after a factory reset.

Factory reset a camera from your Arlo account

To factory reset your camera while it is connected to the cloud:

Factory reset an Arlo camera with the Sync button

To factory reset your camera if it is offline or does not have battery power:

How do I factory reset the Arlo Keypad Sensor Hub?

This article applies to:

SH1001

If you are having issues with your Arlo Keypad Sensor Hub, first try to restart the device. If problems persist you may need to perform a factory reset.

To restart your Arlo Keypad Sensor Hub using the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on your Arlo Keypad Sensor Hub device card.

4.On the Security Hub Settings screen, tap on the name of your device to access the Device Info screen.

5.Tap Restart at the bottom of the screen.

6.Tap Yes to confirm.
The Keypad Sensor Hub Mode LEDs will illuminate white and cycle in a pattern while the device resets.

To restart your Arlo Keypad Sensor Hub using the Keypad:

1.Press  on the Arlo Keypad Sensor Hub to set the Mode to Standby.

2.Enter your PIN on the Keypad and press ..

3.Press and hold the 5 button on the keypad for 10 seconds.
The Keypad Sensor Hub Mode LEDs will illuminate white and cycle in a pattern while the device resets.

To factory reset the Arlo Keypad Sensor Hub using the Keypad:

WARNING: Factory resetting your Arlo Keypad Sensor Hub returns it to default settings.

• Your Arlo Keypad Sensor Hub is also removed from your Arlo account after a factory reset.

• You must follow the in-app setup process to use your Arlo Keypad Sensor Hub after a factory reset.

• All paired Arlo All-in-One Sensors must be factory reset and paired again after the Arlo Keypad Sensor Hub is reinstalled.

◦ To factory reset your All-in-One Sensor, visit: How do I factory reset the Arlo All-in-One Sensor?

• All Pro 5S cameras connected with SecureLink will need to be paired again.

◦ To pair your Arlo Pro 5S camera with SecureLink, visit: How do I pair my Arlo Pro 5S Camera to my Arlo Keypad Sensor Hub using Arlo SecureLink?

1.Press  on the Arlo Keypad Sensor Hub to set the Mode to Standby.

2.Enter your PIN on the Keypad and press ..

3.On the Arlo Keypad Sensor Hub, press and hold the . and . buttons at the same time for 10 seconds.
The Keypad LEDs will flash white five times to indicate a factory reset.

• Note: After factory resetting the Arlo Keypad Sensor Hub, you must re-add it to your Arlo account. For more information on this process, visit: How do I setup and install my Arlo Keypad Sensor Hub?

To factory reset your Arlo Keypad Sensor Hub using the Arlo Secure App:

WARNING: Factory resetting your Arlo Keypad Sensor Hub returns it to default settings.

• Your Arlo Keypad Sensor Hub is also removed from your Arlo account after a factory reset.

• You must follow the in-app setup process to use your Arlo Keypad Sensor Hub after a factory reset.

• All paired Arlo All-in-One Sensors must be factory reset and paired again after the Arlo Keypad Sensor Hub is reinstalled.

◦ To factory reset your All-in-One Sensor, visit: How do I factory reset the Arlo All-in-One Sensor?

• All Pro 5S cameras connected with SecureLink will need to be paired again.

◦ To pair your Arlo Pro 5S camera with SecureLink, visit: How do I pair my Arlo Pro 5S Camera to my Arlo Keypad Sensor Hub using Arlo SecureLink?

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on your Arlo Keypad Sensor Hub device card.

4.On the Security Hub Settings screen, tap on the name of your device to access the Device Info screen.

5.Tap Remove Device at the bottom of the screen.

6.Tap Yes to confirm.

• Note: After you Factory Reset your Arlo Keypad Sensor Hub, you must re-add it to your Arlo account. For more information on this process, visit: How do I setup and install my Arlo Keypad Sensor Hub?

How do I factory reset the Arlo All-in-One Sensor?

This article applies to:

SH1001

Factory resetting the Arlo All-in-One Sensor returns it to default settings. After a factory reset, you must follow the setup process to pair the sensor with your Arlo Home Security System.

To reset the Arlo All-in-One Sensor:

The amber LED blinks slowly for five seconds to indicate a successful factory reset.

How do I factory reset the Arlo Wire-Free Outdoor Siren?

This article applies to:

SLB1001

If you are having issues with your Arlo Wire-Free Outdoor Siren, restart the device. If problems persist, perform a factory reset.

To restart the Arlo Wire-Free Outdoor Siren with the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on the Arlo Wire-Free Outdoor Siren.

4.Tap the name of your device to access the Device Info screen.

5.Tap Restart at the bottom of the screen.

6.Tap Yes to confirm.

To restart the Arlo Wire-Free Outdoor Siren using the device:

To factory reset the Arlo Wire-Free Outdoor Siren using the device:

WARNING: Factory resetting your Arlo Wire-Free Outdoor Siren returns it to default settings. The Arlo Wire-Free Outdoor Siren is also removed from your Arlo account after a factory reset. You must follow the in-app setup process to use your Arlo Wire-Free Outdoor Siren after a factory reset.

Note: After the factory reset, re-add the Arlo Wire-Free Outdoor Siren to your Arlo account.

To factory reset your Arlo Wire-Free Outdoor Siren with the Arlo Secure App:

WARNING: Factory resetting your Arlo Wire-Free Outdoor Siren returns it to default settings. The Arlo Wire-Free Outdoor Siren is also removed from your Arlo account after a factory reset. You must follow the in-app setup process to use your Arlo Wire-Free Outdoor Siren after a factory reset.

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on the Arlo Wire-Free Outdoor Siren.

4.Tap the name of your device to access the Device Info screen.

5.Tap Remove Device at the bottom of the screen.

6.Tap Yes to confirm.

Note: After the factory reset, re-add the Arlo Wire-Free Outdoor Siren to your Arlo account.

How do I factory reset the Arlo Wire-Free Keypad?

This article applies to:

KB1001

If you are having issues with your Arlo Wire-Free Keypad, first try to Restart the device. If problems persist you may need to perform a Factory Reset.

To Restart the Arlo Wire-Free Keypad using the Arlo Secure App:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on the Arlo Wire-Free Keypad device card.

4.Tap the name of your device at the top of the screen.

5.Tap Restart at the bottom of the Device Info screen.

6.Tap Yes to confirm.
The LEDs will illuminate white and cycle in a pattern while the device resets.

To Restart the Arlo Wire-Free Keypad using the device:

1.Press  to set the Mode to Standby.

2.Enter your PIN and press the check button.

3.Press and hold the 5-button for 10 seconds.
The LEDs will illuminate white and cycle in a pattern while the device resets.

To Factory Reset the Arlo Wire-Free Keypad using the Arlo Secure App:

WARNING:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap  on the Arlo Wire-Free Keypad device card.

4.Tap the name of your device at the top of the screen.

5.Tap Remove Device at the bottom of the Device Info screen.

6.Tap Yes to confirm.

Note: After the factory reset is complete you must re-add the device to your Arlo account. For more information, visit: How do I setup and install my Arlo Wire-Free Keypad?

To Factory Reset the Arlo Wire-Free Keypad using the device:

WARNING:

1.Press  to set the Mode to Standby.

2.Enter your PIN and press .

3.Press and hold the  and  buttons at the same time for 10 seconds.
The LEDs will flash white five times to indicate a factory reset.

Note: After the factory reset is complete you must re-add the device to your Arlo account. For more information, visit: How to I setup and install my Arlo Wire-Free Keypad?

How do I factory reset my Arlo Go camera?

This article applies to:

VML4030

If you factory reset your Arlo Go camera or remove it from your account, you forfeit all prepaid Arlo Mobile service for that monthly billing period. If you are using a different service provider, such as AT&T or Verizon, factory resetting your camera has no effect on your service provider account.

The easiest way to factory reset your Arlo Go camera is to remove it from your account.

If your Arlo Go camera is not in network coverage or is not connected to the cloud, you must scan a QR code to factory reset it.

To factory reset your Arlo Go camera while it is connected to the cloud:

To factory reset your Arlo Go camera when it is not connected to the cloud:

1.Press and release the sync button on the top of the camera.

You will hear a click.

2.Hold the camera about 4 to 8 inches (10 to 20 cm) in front of this QR code until you hear a chime:

To set up your Arlo Go camera again, visit: How do I set up my Arlo Go camera?

How to factory reset an Arlo Q or Arlo Q Plus Camera

This article applies to:

VMC3040  VMC3040S

WARNING: Factory resetting the Arlo Q or Arlo Q Plus Camera returns it to the default settings. This means that you must follow the setup process in the Arlo Secure app to use the camera after a factory reset.

To perform a factory reset on the Arlo Q or Arlo Q Plus Camera:

Note: A factory reset will not remove the camera from the Arlo Secure App. You must remove Arlo Q from the Device list and reinstall the camera.

How to factory reset Arlo Baby

This article applies to:

ABC1000

Factory resetting Arlo Baby erases the current settings and removes the camera from your Arlo Secure App.

To Factory Reset Arlo Baby:

1.Use a paperclip to press and hold the Reset button for ten seconds.

2.Release the Reset button after ten seconds to return Arlo Baby to its factory settings.

3.Reinstall the device using the Arlo Secure App.

How do I perform a factory reset on my Arlo Bridge?

This article applies to:

AL1101  ABB1000

If your Arlo Bridge is already set up and you want to perform a factory reset using the Arlo Secure App:

Note: Your Arlo Bridge must be completely set up to reset your bridge using the Arlo Secure App.

If you want to reset the Arlo Bridge in the middle of the set up process:

How do I factory reset my Arlo Audio Doorbell?

This article applies to:

AAD1001

To factory reset your Arlo Audio Doorbell:

1.Open the Arlo Audio Doorbell battery cover.

Note: Do not remove the batteries.

2.Press and hold the Sync button for 10 seconds.

On a successful reset, the LED flashes white in quick succession.

How do I factory reset the Arlo Safe Button?

This article applies to:

ASB1001

To reset the Arlo Safe Button using the Arlo Safe App:

1.Launch the Arlo Safe App.

2.Tap .

3.Tap My Device.

4.Select the device.

5.Tap Remove Device.

6.Tap Remove to confirm that you want to remove the device.

7.Tap Reset Arlo Safe Device.

To factory reset the Arlo Safe Button when not paired with the app:

On iOS devices:

On Android devices:

.

Why add cameras to an NVR?​

.

Before you start…​

Before anything, to be able to add your IP cameras, you need to make sure that:
.

.

How to connect an IP camera to a Hikvision NVR 5

How to add your cameras using the V5 GUI…​

Step 1:​

Open a web browser and enter the IP address of your NVR in the address bar. If you are not sure what this is, use the SADP tool to find it.​

Step 2:​

Log in to the NVR using the “admin” username and password you have set on it.​

Step 3:​

Go to: Device Access > Device Configuration > PoE Settings​

​

If you are connecting your camera via the Plug-and-Play method, then make sure that Network Camera Plug-and-Play is enabled on the POE port you will be connecting the camera to on this page.​

​

For any camera with a cable run under 100m, leave the Network Cable Distance as Short Distance.​

​

If you are connecting your camera manually by IP address, disable the Network Camera Plug-and-Play option for the channel that you plan to add the camera to.​

Step 4:​

Go to: Device Access > Device > Video Device​

​

For any Plug-and-Play camera, just make sure that it is in its inactive default state and then connect it to the port you reserved in step 3. After 20 seconds or so, the camera Status should turn to Connecting and then Online (you may need to click on Refresh to see this).​

​

For Manually added cameras, if you can see the camera in the List of Online Devices section, then just tick the box for the camera and then click + Add to Device List, which will then automatically add it to one of the channels you disabled Plug-and-Play on in the last step.​

Alternatively…​

Click on +Add at the top of the page and fill out the fields as follows:​

​

IP Address: Enter the IP address of your camera, using the ‘Test’ button to verify there is a camera at that address. ​

Device Name: This can be anything you like, as it is the name the camera will show with on your NVR. ​

Protocol: Select the camera’s manufacturer from this list, or failing that, use the ONVIF protocol (your camera will need to have ONVIF enabled for this to work). ​

Management Port: Enter the Server port set on the camera, which you can find in the SADP tool or in Network>Basic Settings>Port in the camera’s web browser interface. If you haven’t changed this, it is usually 8000 by default. ​

User Name: “admin” or the username of any other users set up on that camera. ​

Password: The password set with that user on the camera – if this is the same as the ‘Default Activation Password‘ you have set on the NVR, then you can tick this box instead. ​

Transfer Protocol: ‘Auto’ is normally best. ​

​

When these are completed, click OK.​

​

Your camera should then appear in the list of devices with an assigned channel, and an Online status, meaning it has been successfully added.​

.

.

Extra tips…​

How do I reset my Hikvision device to factory settings?

In some cases, you’ll need to reset your Hikvision device to its inactive factory state. This could be if you’re passing the system on to somebody else; if you’ve forgotten your password; or simply if something has gone wrong during the configuration, meaning you need to start afresh.

There are a couple of ways of doing this, the method you’ll use depends on whether you have a password to log into the device.

Please see the simple steps for doing each below:

Via the device’s backend in a web browser or iVMS-4200:

If you are able to log into your device’s configuration menu in iVMS-4200 or the web browser interface, then the easiest way to reset it is on the Upgrade & Maintenance page here. The steps below show you how to find this page in both interfaces.

Step 1:

iVMS-4200:

In a web browser:

Step 2:

In both iVMS-4200 and a web browser:

Factory reset by using the device’s pushbutton:

On the majority of Hikvision’s newer camera models, there will be a pushbutton on the camera which will allow to carry out a hard reset without needing to log into it. This is most useful when you have forgotten your password, as it allows you to set a new password on the camera while avoiding much of the faff involved in doing this through the SADP tool.

Step 1:

​

Step 2:

1. Disconnect the camera’s power supply.
2. Press the reset button and keep it held down.
3. Restore the power supply while continuing to hold down the button.
4. Keep the button pressed for a further 10 seconds.
5. Release the button and wait for the camera to reboot.

.

Lorex was the first to market 4K resolution security cameras and more recently released the Fusion Collection, which offers recording for both wired and wireless cameras.

.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cloud App. Refer to the Lorex Cloud App Product Compatibility Chart for a list of compatible recorders.

.

Changing Your Password via Your Recorder

.

Retrieving your device ID

Lorex Devices Password Reset Detailed Guide.

Changing or Resetting Your Recorder’s Password

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex App. Refer to the Lorex App Product Compatibility Chart for a list of compatible recorders.

.

Table of contents:

.

Change or Reset Your Recorder’s Password Through the Lorex App

.

Change Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (New Local UI)

.

Change Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

.

Change Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cirrus App. Refer to the Lorex Cirrus App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Cirrus App

Note: You cannot reset your password with the Lorex Cirrus App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Cirrus App.

1.Tap the  icon in the top left corner of the Lorex Cirrus app.

2.Select Devices.

3.Tap Edit under your desired recorder.

4.Tap Change Password.

5.Fill in the required fields as follows:

.

Changing Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

.

Resetting your Password

1.Login to your system using the reset password.

2.From the Live View screen, click >  Setup > User.

3.From the list of accounts, find the row for the account you want to update and click 

This password will be used to connect to your system from now on.

.

Resetting Your Password (LHA / LNK Series)

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Pro App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Pro App. Refer to the Lorex Pro App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Pro App

Note: You cannot reset your password with the Lorex Pro App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Pro App.

1.Tap the ellipses (…) above your desired recorder in the top right corner of the app.

2.Tap Device Settings.

3.Tap  in the top right corner of the Device Settings page.

4.Tap Modify Device Password.

5.Fill in the required fields as follows:

.

Changing or Resetting Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

How to Reset Your Password

There are different processes to reset your password for different types of Lorex products or accounts.

Please select the type of password reset you need:

How to Reset Your Lorex App Account Password

Please note that your Lorex Account and Lorex App account email and passwords are the same. Changing one will automatically change the other.

There are two ways to reset your Lorex App password:

Method 1: App

1. Click Forgot Password on the main app Login screen.

2. Enter your email, a new account password, and click Get Activation Code.

3. Enter the 6-Digit Verification Code sent to your email and click ok.

Method 2: Website

1. Click Recover Password from the Lorex Login page

2. Enter your email address associated with your Lorex Account and click Recover

3. Check your email for your Verification Code.

4. Return to the Recover Password page and input your email address, new password, and verification code that you received.

5. Click Reset and then login using your new credentials.

Further Support

Resetting Your Lorex App password

Resetting Your Lorex Account Password

How to Reset Your NVR or DVR’s Password

Please follow the steps for the app associated with your Recorder

Lorex Recorders Using the Lorex App, Lorex Cirrus App or Lorex Cloud App

Request a temporary password from the website to reset your recorder’s password:

Note: It is necessary to register your product for warranty to request a temporary password for your Recorder.

1. Login into The Warrany Section of Your Lorex Account:

2. Register Your Warranty:

3. Reset Device Password:

4. Use Your Temporary Password:

Further Support

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

.

Support Hours Eastern Time:

Mon to Fri: 10:00AM – 9:00PM

Sat & Sun: Closed

How to Locate Your Recorder’s System Information

To complete the temporary password request form on the website, please gather the following information:

System Date: Located in the top-right corner of the screen once the recorder is powered on.

Device ID: Located on the QR code sticker attached to the outside of your recorder.

Device Model: Located in the INFO section from the Quick Menu of your recorder (the device ID can also be found here).

Once you have the Device ID at hand, please take a picture of the Device Info screen and the sticker with the serial number found on the unit.

.

How to Reset Your Smart Home Camera’s Password

To ensure your privacy and prevent any unauthorized attempts to gain access to your camera, there is no way to reset your smart home camera’s password. The camera will have to be reset to its factory default.

How to restart or factory reset your IoT Device:

Further Support

Wi-Fi Security Camera – How to reset your device

How to Reset Your IP Camera’s Password

If you have forgotten the password to one of your IP security cameras, you will either need to reset the camera manually. Please see your camera’s documentation to see if there is a reset button.

Reset Button:

If your IP Camera includes a reset button, you can hold the button down to revert it to its default setting. This will allow you to set up the camera again through your NVR with a new password.

Wi-Fi Security Camera – How to change password

We recommend using strong passwords for the Lorex App app and all cameras connected to it, and changing them on a regular basis.

This guide applies to the following products: W281AA, W282CA, W261AS, W261AQ, LNWDB1, and V261LCD.

.

How to change device password

Here’s how to change the password of your camera.

Step 1. Launch the Lorex App app, and tap Device Settings.

Step 2. Tap the Name of your device.

Step 3. Tap Device Password.

Step 4. Enter your Old Password, followed by the New Password, Confirm Password, and tap the Save icon.

NOTE: You’ll get a prompt that you’ve sucessfully updated your device password.

.

How to change Lorex App account password

Here’s how to change the password of your Lorex App account.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Tap Change Password.

Step 5. Enter your Current Password, followed by the New Password, then tap Done.

NOTE: You’ll get a prompt that you’ve sucessfully updated the password of your Lorex App account.

You’ll also be loggged out automatically. You must re-login using your new password

.

How to enable or disable fingerprint login

If your smartphone supports fingerprint login, you can use it to sign in to your Lorex App.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Toggle Fingerprint Login button to ON (to enable it) or OFF (to disable it).

.

How to Download and Prepare Firmware

Description

This guide will show how to download and prepare the firmware file for a Dahua device.

Firmware files for Dahua devices can be found at Firmware by Device or the specific product page for the device

Firmware is typical provided in a ZIP file, a compressed file format

This file will contain the actual firmware file, which needs to be extracted from the ZIP file in preparation for the upgrade

Prerequisites

Video Instructions

Step by Step Instructions

Confirm the Model and current firmware of Dahua device

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Info

3. Click Version

The Device Type will be displayed

The current System Version will be displayed

Download the firmware file for device from DahuaWiki

4. In a browser go to DahuaWiki.com

Under Specifications, Firmware, & Manuals

Click the device type (in this example Recorder)

5. Enter the device model into the field

6. The results will be filtered

7. Click the firmware icon to download the firmware file

8. The file will download

Extract the firmware file to local computer

9. Right click the Start Menu / Windows icon in the bottom left of the screen

Select File Explorer

10. Select Desktop

11. Click Home

Then click New folder to create a new folder to extract the contents of the firmware zip file

12. Find the created folder in the list, double click to open

13. Under the Downloads window of the browser, click ‘Show in folder’

A new File Explorer window should open containing the directory the firmware zip was downloaded to

Locate the file in the list

14. Right click

Select Cut

15. Select the window with the new directory

Right click in the window

Select Paste

The folder will appear in the directory

16. Right click the file

17. The contents of the zip file will appear in a new window

18. Click to select all files in the folder

Drag and drop the files to the created folder

The files will appear in the directory

The firmware file will appear in the directory ready to use

How to Reset Device to Factory Default

Latest Dahua firmware 2024

Step by Step Instructions

1. From Live View

Right click select Main Menu

2. Under Setting

Click System

3. Click Default

4. Click Factory Reset

5. A prompt will appear to confirm the factory default

Click Yes

6. The unit will default and reboot

7. When the device has booted back up it will be factory reset and is now ready for device initialization

SystemUI New

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. Click Default

5. Click Factory Default

6. A prompt will appear to confirm the factory default

Click OK

7. The NVR will default and reboot itself

8. The unit will boot back up

9. The device has been factory reset and is now ready for device initialization

WebUI Old

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the Factory Reset

The unit will reboot and is now ready for device initialization

WebUI New

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the factory default

Click Yes

The unit will reboot and is now ready for device initialization

Firmware Update via USB Drive

Description

This page will show you how to update the firmware of your Dahua device via a USB drive at the recorder

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

Prerequisites

Video Instructions

Step by Step Instructions

1. Download Firmware and copy to USB such as a flash drive ➞ Insert USB into recorders USB port.

2. It will prompt for option to upgrade, Click System upgrade ➞ Click Start.

3. Browse for firmware ➞ Open firmware folder is in ➞ Select Bin File ➞ Click Start. Device will reboot once finished.

SystemUI New

Prerequisites

Video Instructions

Step by Step Instructions

USB drive with Firmware file should be plugged into USB slot on recorder

1. From the Main Menu, click Operation

2. Click System Maintain > Upgrade

3. Click the System Upgrade in the middle of the page.

4. Select the Firmware file from the list

Click OK

5. The firmware update will begin.

Make sure to not unplug the power during this process.

6. The NVR will reboot as the final step of the process

Firmware Update via WebUI

Description

This page will show you how to update the firmware of your Dahua device via the WebUI

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

Instructions

WebUI Old

Prerequisites

Video Instructions

Step by Step Instructions

Step 1: From IE(Internet Explorer) type in the devices IP address on the IE address bar → login with credentials.

Step2: Setup → System → Upgrade

Step 3: Click on “Browse” → Select correct firmware

USB firmware Upgrade via web.

If firmware is on USB Device → Click on browse → Navigate to USB location → Select firmware → Open → Upgrade.

WebUI New

Prerequisites

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. Click Browser

6. Locate the firmware file

Click Open

7. Click Upgrade to begin the update process

8. A message will appear to confirm the upgrade process

9. When the upgrade is complete the device will reboot

Firmware Update via SmartPSS

Description

This page will show you how to update the firmware of your Dahua device via SmartPSS

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

Instructions

SmartPSS 2.002

Prerequisites

Video Instructions

Step by Step Instructions

1. From the Main Page of SmartPSS

Click Device CFG

2. Click to select the device from the device tree on the left side of the screen

3. Click Upgrade

4. Click the folder icon

5. Locate the firmware file

Click Open

6. Click Firmware Upgrade to begin the firmware update process

7. A prompt will appear to confirm the upgrade process

8. A prompt will appear to confirm a successful upgrade

Firmware Upgrade via ConfigTool

Description

This page will show you how to upgrade the firmware of your Dahua device via ConfigTool

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

Step by Step Instructions

Single Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the device you are looking for in Start IP and End IP.
Enter the login information for that device in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the device you want to upgrade in the list and click on the Folder icon next to it under the Upgrade File Path column

4. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

5. Verify the file path is listed next to the device in the list.
Then click on the Upgrade icon to the right of the device in the Operate column

6. Click on OK

7. The progress bar will fill up as the device is upgraded

8. Once the device has been successfully upgraded you will see a Green Check Mark next to it in the list

Batch Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the devices you are looking for in Start IP and End IP.
Enter the login information for those devices in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the devices you want to upgrade in the list and check the boxes next to them. (Make sure all devices you check require the same firmware.)
Then click on Batch Upgrade at the top

4. Click on OK

5. Click on Browse

6. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

7. Click OK at the bottom

8. The progress bars will fill up as the devices are upgraded

9. Once the devices have been successfully upgraded you will see Green Check Marks next to them in the list

Recorder Firmware Update via Online

Description

This page will show you how to update your Dahua Recorder online.

Note: All devices should be “Factory Reset” once the firmware update is complete.

When the NVR detects there is a newer firmware in the server, a ‘1′ icon will appear at the System icon.

The entire process takes about 5 minutes depending on network connection.

Prerequisites

Instructions

SystemUI

Prerequisites

Video Instructions

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. The upgrade menu will show if a new firmware version is available

5. Click Upgrade Now to begin the update process

6. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

7. The firmware file will begin to download

8. After the download is complete the unit will automatically begin the firmware upgrade

9. The unit will reboot as the final step of the upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

From Live View, right click Select Main Menu

11. Click Operation

12. Click System Maintain

13. Click Default

14. Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

16. The unit will reboot

17. When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

WebUI

Prerequisites

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. The upgrade menu will show if a new firmware version is available

6. Click Upgrade Now

7. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

8. The firmware file will begin to download

9. After the download is complete the unit will automatically begin the firmware upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

12. Click Operation

13. Click System Maintain

14. Click Default

Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

The unit will factory default and reboot

When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

Index of /Firmware

.

.

The IVSEC brand comprises Australian selected components and hardware, and software servers for local updates within Australia. IVSEC has grown quickly while expanding and maintaining excellent customer service. For any enquiries, please contact our friendly staff.

My smartphone is showing “offline” or “connect close” in the IVSEC X mobile app?

When adding your Recorder or cameras to the IVSEC X mobile app if a message says “Offline” or the device status is showing “Connect close” please check the following:

Example of Offline message

Example of Connect Close message

1) Check that the QR code, username and password details have been entered correctly into the IVSEC X app

A. Connect HDMI LCD and USB mouse to IVSEC Recorder

B. Click on the 4-square / arrow icon on the bottom left-hand corner of the screen

C. Check the name shown in Current user:

Note: The default user is admin but this may have been modified by the installer

D. Open the IVSEC X app on your phone

E. Press the “Human” icon of the top left-hand corner of the app

F. Press “Device List’

G. Press the square icon with a pencil mark

H. Check the IP Address/ID is the same as the QR code located on top of the IVSEC recorder

I. HTTP Port / Client Port

J. Check the username is the same name as per point C (this is case sensitive)

K. Enter the correct password

L. Press Save or Apply

2) Check for Network Connectivity

A. Check that an ethernet cable is connected to the LAN port of your modem

B. Check that the other end of the ethernet cable is connected to the LAN/WAN port of the IVSEC Recorder

C. Check that the Green and Yellow LEDs light up after connecting the cable.

NOTE: If the LEDS do not light up then the IVSEC X app will not work. Try replacing the ethernet cable, if still no LEDS light up contact your installer

D. Connect an LCD and USB mouse to the recorder and check the “connect status” icon that appears on the bottom right hand corner of the taskbar (when LCD is connected to recorder). Ensure that the icon has a green tick as shown in below image

Refer to explanation below of other connection status:

3) Ensure you have the latest version of IVSEC X app installed on your phone. Check that your Android or Apple device has the latest software/firmware and security updates installed. Try un-installing, re-installing the app and add the device again

4) Power your modem and IVSEC Recorder off for 30 seconds. Power back on and wait 5 minutes for the internet connection to come back online.

5) If you are running a VPN app on your smartphone disable the app and try the IVSEC X app again.

Examples of VPN providers include Surfshark, NordVPN, Norton’s VPN.

6) Check the IVSEC Recorder substream settings

A. Using LCD and mouse connected to NVR go to setup – Record – Encode Check your NVR substream settings- “Substream” tab

Recommended substream settings to minimise mobile app bandwidth issue

Resolution: 640 x 480

Bitrate: 512kbps

B. Click Apply on bottom right corner

Please refer to YouTube link: Adjusting stream settings via IVSEC X Mobile app

or

Please refer to YouTube link: Adjusting Camera stream settings via NVR (LCD & mouse required)

7) Some older Samsung phones running Android 11 on the Telstra network may be unable to stream live view or the cameras will show as offline while connected to mobile data (4G/5G). The issue has been identified on the Telstra network where an Android update causes the APN to select IPv6 only. Click here for APN re-configuration (Applies to Telstra mobile customers only running Android)

8) Some Telstra NBN modem / routers may restrict access to cameras (firmware issue on the router). The cameras may be slow to appear or show as offline. Check the model number listed on the bottom of your Telstra router. Click on the documentation below which details the steps to configure port forwarding as a workaround to access your cameras

9) Connect to your wifi and perform a speed test – https://www.speedtest.net/

Click the GO button. If your upload speed result is 3Mbps or less, you should contact your Internet Provider to test your connection

10) Email service@ivsecurity.com.au for additional support

iVSEC X Mobile App

1. How to set up the IVSEC X app on my Smartphone

The IVSEC X app allows you to access your IVSEC cameras live view remotely, playback recordings and other useful features
Please refer to YouTube link: https://youtu.be/71mvg5QdsfY

Scan the appropriate QR code below to download the IVSEC X app

Apple Store | Google Play

2. My smartphone is showing “connect close” in the IVSEC X mobile app?

Click here for troubleshooting details.

3. How to reduce camera buffering when accessing IVSEC cameras on the mobile app.

If you have limited or slow Internet connection (either at home or on your smartphone) reducing the substream settings can help the cameras to show up quicker on the app

Video guide – How to modify the settings via the IVSEC X mobile app

Video guide – How to modify the settings via the Recorder using an LCD and mouse

Recommended substream settings
Resolution: 640 x 480 | Bitrate: 256 kbps

Recommended mobile stream settings
Resolution: 640 x 480 | Bitrate: 128 kbps

4. What does “Max User Playback” mean?

If you see “Max User Playback” when trying to playback footage in the app it means someone else is currently accessing playback either via the NVR or through the app. Restarting the NVR will clear this message.

Access via Windows / Mac

5. How to install setup the VMS Pro application for Windows.

Video Guide

NOTE: VMS for Windows setup is similar for Mac

Application download links available from ivsecurity.com.au or via the YouTube description

6. How to login to an IVSEC NVR or camera using Internet Explorer or Chrome

Refer to “How to upgrade my NVR firmware” FAQs. Once your NVR is upgraded to the latest firmware you will be able to log in using any browser using the NVR IP address.

7. How can I search for IVSEC devices on a network or change an IP address

To search for X range cameras and recorders on a network use the Device Config Tool.

8. How to setup the surveillance client on Windows

Please note surveillance client is no longer supported, refer to VMS Pro. For legacy installations please refer to YouTube links below:

Windows | Mac

9. My MAC is not letting me install any of the IVSEC applications

If your MAC blocks the app from opening click here for details

10. How to playback and export footage from surveillance client on a Mac

Watch Video Guide

11. How to get my old IVSEC app working (non X range NVR model)

Check the model number of your recorder (silver sticker either on the top or bottom of the recorder. If the model number does NOT have an X in the model number then click here for instructions on how to configure your non X range IVSEC NVR using port forwarding and DDNS.

Recorder

12. How to reset my NVR password?

Download IVSEC NVR Password Reset Procedure

13. How to perform NVR firmware update using a USB flash drive or online update

Watch Video Guide

14. How to setup motion detection on an IVSEC X-Range NVR

Watch Video Guide

15. How to export footage from an IVSEC X-Range NVR

Watch Video Guide

16. How to factory default an IVSEC X-Range NVR

Watch Video Guide

17. How to configure disk grouping for 16, 32 and 64 channel IVSEC recorders

The maximum number of channels (cameras) that can record to one hard drive is 16. If your recorder is compatible with disk grouping (e.g. NR316XB, NR316XC, NR532XA, NR564XA, NR564EXA and NR564EXB) you will need to configure disk grouping and ensure your cameras are recording. If you are using an NVR that is capable of 64 channels and have 64 cameras installed, you will need to install a minimum of 4 hard drives

16 cameras installed = 1 hard drive required (minimum)

32 cameras installed = 2 hard drives required (minimum)

64 cameras installed = 4 hard drive required (minimum)

Video – Disk grouping setup process

IP Camera

18. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

19. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

20. How to Setup 3rd Party cameras onto an IVSEC X-Range NVR

Watch Video Guide
Download Device manager tool (for non X range IVSEC branded cameras)
Download IVSEC PTZ Search Tool (for non X range IVSEC branded cameras)
Hikvision camera setup using onvif
Dahua camera setup using onvif

21. How to add 2N IP Verso Intercom camera to an IVSEC NVR

Watch Video Guide

22. Camera image is randomly showing distortion on the bottom of the image

If you are experiencing distortion at the near the bottom of the camera image please click here for useful troubleshooting steps

23. Modifying White Light Settings

Some of the iVSEC camera range have inbuilt white lights (LEDs) that turn on at night as a deterrent to intruders and for colour recording at night. Please follow this guide to learn how to disable this function or have then turn on only when motion is detected.

Smart Home Integration

24. iVSEC – Alexa

Now it’s even easier to see what’s happening. Amazon Alexa can be used to stream live camera video to your Amazon Echo Spot or Echo Show device simply by speaking your commands. Follow this guide to learn how to connect to Amazon Alexa for voice control.

25. iVSEC – Google

Now it’s even easier to see what’s happening. You can ask your Google Assistant to show your Cameras on your TV with Chromecast. Read this guide to learn how to connect your cameras to your Google Assistant and enable voice control.

How to upgrade IVSEC NC323XD Camera Firmware For additional support go to https://ivsecurity.com.au/ or email service@ivsecurity.com.au Video will demonstrate how to upgrade IVSEC NC323XD camera firmware. NOTE: Firmware compatible with models NC323XD, NC531XB, NC512XC, NC512XD & NC528XC Download NC323XD firmware (link below) https://ivsecurity.com.au/support/fir… Copy the entire folder to USB flash drive Connect USB to NVR and watch video demonstrating how to perform the upgrade.

How to playback and export footage from surveillance client onto a MAC

How to playback and export footage from surveillance client onto a MAC To download Surveillance client and Device Config Tool (MAC) – https://www.dropbox.com/s/49enfbklip4… To download VLC for MAC – https://www.videolan.org/vlc/download… For more information visit https://ivsecurity.com.au/

Videoloft removes the need for a local recorder – simplifying the installation, saving space on-site and removing the risk of your recorder being damaged or tampered with.

Alternatively, you may still want to keep your Lorex NVR/DVR and back-up your recorder to the cloud. It takes minutes to set up – all you need to do is connect the Videoloft Cloud Adapter to the same network as your recorder.

.

1. Lorex Cloud‎ Setup (For Recorders)

Prerequisites:

.

NOTE

.

The first time you power up your system, you will be asked to create a new, secure password. Follow the instructions below for remote access to your security system after you have created a new secure system password through your recorder.

1.Download and install the free Lorex Cloud app from the App Store or Google Play Store.

2.Tap the Lorex Cloud icon to open the app.

3.Tap Live view iconthen device list icon

4.Tap DVR/NVR/IP Camera.

5. 

6.Configure the following:

• Register Mode: Select Device ID.

• Name: Choose a name for your system of your choice.

• Device ID: Tap the QR code icon ()

and line up the QR code on the top of your system using the camera on your mobile device. 

OR Under Device ID, manually enter the Device ID printed on the label.

.

NOTE If you are accessing your system for the first time, you must create a new password through your recorder. See your recorder’s instruction manual for more details.

.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cloud App. Refer to the Lorex Cloud App Product Compatibility Chart for a list of compatible recorders.

.

Changing Your Password via Your Recorder

.

Retrieving your device ID

.

Changing or Resetting Your Recorder’s Password

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

How to Reset Your Password

There are different processes to reset your password for different types of Lorex products or accounts.

Please select the type of password reset you need:

How to Reset Your Lorex App Account Password

Please note that your Lorex Account and Lorex App account email and passwords are the same. Changing one will automatically change the other.

There are two ways to reset your Lorex App password:

Method 1: App

1. Click Forgot Password on the main app Login screen.

2. Enter your email, a new account password, and click Get Activation Code.

3. Enter the 6-Digit Verification Code sent to your email and click ok.

Method 2: Website

1. Click Recover Password from the Lorex Login page

2. Enter your email address associated with your Lorex Account and click Recover

3. Check your email for your Verification Code.

4. Return to the Recover Password page and input your email address, new password, and verification code that you received.

5. Click Reset and then login using your new credentials.

Further Support

Resetting Your Lorex App password

Resetting Your Lorex Account Password

How to Reset Your NVR or DVR’s Password

Please follow the steps for the app associated with your Recorder

Lorex Recorders Using the Lorex App, Lorex Cirrus App or Lorex Cloud App

Request a temporary password from the website to reset your recorder’s password:

Note: It is necessary to register your product for warranty to request a temporary password for your Recorder.

1. Login into The Warrany Section of Your Lorex Account:

2. Register Your Warranty:

3. Reset Device Password:

4. Use Your Temporary Password:

Further Support

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)