O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.

If you can’t find the QR code or can’t scan the QR code, please select Wireless camera.

3. Make sure your O-KAM Pro camera is ready to connect, the camera light is flashing or you hear the prompt “Please use the app for Wi-Fi configuration”.

Note: If the light is not blinking or there is no prompt tone, please reset the camera.

Then click ‘I heard the prompt tone or see the indicator light flashing’, go to the next step.

4. Enter your wifi password, then click Next.

Please choose 2.4G wifi, some O-KAM Pro cameras only support 2.4G wifi.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

5. Make sure your wifi is 2.4g and the wifi password is correct, then click Confirm. Give the displayed QR code to the camera to scan.

Place the QR code about 15-30 Inch in front of the camera to scan, and complete the scan after hearing the “beep” sound.

After the connection is successful, it will automatically jump to the next step.

After successful connection, you can test the wifi signal strength, or later in the test, please put the O-KAM Pro camera in the location with strong wifi signal.

The app will prompt you to subscribe, it is recommended to cancel, if you need cloud storage, make sure the O-KAM Pro camera can work properly before subscribing.

AP Mode Connecting O-KAM Pro Camera

If the QR code connection fails or the QR code cannot be scanned, you can try to connect the O-KAM Pro camera using AP mode.

1. Go to your mobile phone’s wifi list to connect to the hotspot wifi of the O-KAM Pro camera, return to the O-KAM Pro APP after the connection is successful, and then the app will auto add the camera.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

2. Go to Settings, select Device Settings, and then click Wi-Fi network.

3. Select your wifi, then enter your wifi password, click Confirm and wait for O-KAM Pro camera to connect to your wifi.

Share O-KAM Pro Camera

Once you have connected the O-KAM Pro camera, if you want your family or friends to use the camera as well, you need to share the camera with your friends via the Share function.

1. Go to the Share screen, then send the QR code to your friend.

Permission Settings:

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

2. Have the invitee download the O-KAM Pro APP and register and login, then click + scan the QR code to add a camera.

Connecting O-KAM Pro Camera without a router

If you want to use O-KAM Pro camera without internet or router, you can connect to the included hotspot wifi to use the camera.

This mode only supports close range use.

1. Go to your mobile phone’s wifi list to connect to the camera’s hotspot wifi, after connecting, return to O-KAM Pro, the app will auto add the camera, then you can start to use it.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

Function setup – Wired O-KAM Pro Cameras

The functions of different types of O-KAM Pro cameras differ slightly, so please check your camera type.

If your camcorder needs to be connected to the power supply at all times to work, then it is a wired O-KAM Pro camcorder type, please check the function setting instructions below.

Recording Setup – Wired O-KAM Pro Cameras

O-KAM Pro camera supports cloud storage and memory card recording, cloud storage requires subscription, the following memory card recording settings.

You need to insert the memory card to record, the recording will be saved in the memory card, after inserting the memory card, the camera will sound a voice prompt.

The default is to start 24 hours recording, you can change the recording mode in TF Record Settings.

O-KAM Pro camera supports the following recording modes:

If the memory card shows abnormality, please try to format the memory card and reboot the camcorder.

View Recordings – Wired O-KAM Pro Cameras

In the live video interface, click TF Card in the lower right corner to view the video saved in the memory card.

Motion Detection Setup

Activate the Motion Detection function in the Monitoring Function, O-KAM Pro cameras support Motion Detection and Human Detection.

Motion Detection

When the camera detects an object moving, it will send an alarm notification to your mobile phone.

This mode may have a high false alarm rate, if you need to detect only suspicious people, we recommend you to choose Human Detection.

Human Detection

The camera will send alarm notifications to your mobile phone only when it detects humanoid objects.

Activity Zone Setup

Setting the detection area allows the camera to detect a specific location, reducing the chance of false alarms.

Smear the area you don’t need.

Detection schedule

Customize the schedule of Motion detection, reduce false alarms. The camera automatically monitors for you during the scheduled time.

Alarm flashing light

After the alarm flashing light is turned on, the camera will automatically flash when motion detection is triggered.

Camera Siren

When Alarm sound switch is turned on, the camera will emit alarm sound when motion detection is triggered, you can choose alarm sound or record your own sound.

Enter Notification Settings, select Camera Siren and then turn on the Alarm sound switch.

Email notification

An email will be sent to you when a motion is detected.

Click Add an email , then enter the email address you want to receive alarm notification and finish the setting.

Auto Tracking

When Person tracking is activated, the camera will Auto Track people’s movements and monitor all activities. It will automatically switch to and focus on the person when they enter the camera’s field of vision.

This feature is only supported by O-KAM Pro cameras that support PTZ.

Human frame

People are automatically framed in the live video Help you filter out motions of other objects and quickly follow the person’s movement.

Night vision setup

O-KAM Pro camera defaults to black and white night vision mode, you can change the night vision mode in Device Settings, Night Vision.

Only cameras with dual light sources support this feature.

Reset O-KAM Pro Camera

Press and hold the O-KAM Pro camera reset button for 5 seconds to reset the camera.

.

O-KAM Pro Camera FAQ and Troubleshooting

You can find here how to fix O-KAM Pro camera can’t connect to wifi, offline and not working problems.

.

Why is my O-KAM Pro Camera offline?

O-KAM Pro camera is offline, it means the camera can’t connect to the network properly, please follow the steps below to fix the offline problem:

Is the router working properly?
Connect your mobile phone to the router Wi-Fi, switch off the mobile data, can you access the internet normally? If it is not normal, try to restart the router.

Whether the WiF strength is full or not
Put the mobile phone to the camera installation location, detect whether the Wi-Fi signal is full? If the signal is weak, it is recommended to adjust the distance from the router to the camera.

Whether the O-KAM Pro camera is normal
If a memory card is inserted into the O-KAM Pro camera, power off the camera and remove the memory card, then check if the camera works properly.

Replace the power supply with another one.

If none of the above solves the offline problem, try resetting the camera and reconnecting it.

Why does O-KAM Pro camera keep showing that it is connecting?

.

See also  How To Setup O-KAM Pro camera(Complete Manual)

.

You can also try:

If it’s a 4G O-KAM Pro camera, please detect if the SIM card’s is in arrears.

.

How to install and use Camera Live on a compatible Windows or Mac PC/laptop

Camera Live is a free program for you Windows PC or Mac that can be used to locate its local IP address and to view the camera’s live feed locally and remotely. 

First download the appropriate installation file from the links below and install the program.

For a Windows PC click here

For a Mac click here

Once you have installed the program, open it and click on Add Video. Then click on Discover to find the cameras UID, or enter it manually ensuring it is correct and all in uppercase. Enter the cameras password ensuring this is correct and in the correct case. Then give the camera a name e.g. garden, drive etc. and click on OK.

Once added wait for the camera to connect to the program. When it is connected you will see a green icon next to the UID, you can then view your camera’s live feed by clicking on the play icon. You will see the “No Video” message until you have viewed the live feed for the first time and the program can produce a thumbnail image from this.

.

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Having touble setting up your camera to record to SD card/NVR/NAS drive.

Are you looking to setup recording? If so please see the links below for full setup guides for each recording method. If you have already set it up but have encountered an issue it may be worthwile running through the setup once more, to check for any errors or mistakes.

SD card recording

UCAM NVR recording

NAS Drive recording

If you are still seeing an error or it is not working as expected please take a look at the common issues and their solutions in the list below.

.

SD card not supported or faulty.

Motion detection page not configured correctly

NAS details not entered accurately.

NVR IP address may have changed.

Incorrect Task Management setup

How can I transfer video clips from an SD card in the camera to my computer?

If you are looking to transfer recordings from an SD card installed in the camera to you computer over WiFi this is limited to one file at a time for practical reasons:

.

1) If your SD card had, for example, 128GB of clips it would not only be very cumbersome to transfer that quantity to your computer over your local WiFi but potentially slow down your local network too. As SD cards have very limited file speeds transferring this magnitude of data may also take a very long time to offload.

.

2) It is also impractical or unwise to transfer en masse as it would also cause a slow down of the camera’s capabilities for the time while the transfer is progressing, and your camera could miss key motion events from being recorded.

.

Solutions? There are a number of options available to you:

.

– You can browse the recordings stored on your camera directly from a web browser and check which recordings are important to keep. You can play back the clips in your browser without needing to download to your computer first. Click here for a guide on how to do this.

.

– You can set the sd card to auto overwrite so that it automatically deletes the oldest recordings when the card is full, so you don’t have manually delete.

.

– You can use a number of tasks in the camera to automatically offload clips from the sd card (before they get overwritten) to Dropbox, your own FTP server, etc.

.

– If you really must download everything off the SD card the easiest and quickest way is to take the sd card out and insert directly into your computer (if it supports SD media) and then simply drag and drop the files off the card to your computer.

.

These are but a few suggestions. If you need further advice on the full range of recording and playback options do get in touch with our Support Team and they will be delighted to help.

Cannot connect to the camera remotely using the app.

Are you having trouble connecting to the camera using the app on your phone? This may be a p2p error. The camera and app use p2p to connect, if the camera is unable to connect to the p2p server then it will not be viewable via the app. Click here to check and resolve this.

.

Has the camera been set to a static IP? We do not recommend setting the camera to a static IP as this is not usually required and can render the camera inaccessible if setup incorrectly. Click here to check this has been setup correctly. 

.

Is the UID correct and all in uppercase? If any character in the cameras UID is not in uppercase it will not be able to connect to the app remotely. If this is the case, delete the camera from the app and add it again. For help with this click here for an Android device and click here for an iOS device.

Changed WiFi router or given a new router by your ISP?

If for some reason you have changed/updated your WiFi router your camera(s) will need to be reset to factory defaults and setup again, since the WiFi details and ip addressing on your camera(s) will still be that of your old router.

To reset your camera(s) and start afresh please click here.

NB: Be sure to read and follow the reset instructions carefully to avoid any problems or delay in setup.

.

Once reset you will need to setup the WiFi connection again. Please follow one of the guides below to complete this.

PC Method

App Method

.

WPS Method, for WPS enabled routers.

Power LED flashing rapidly and camera offline?

A rapidly flashing green power LED usually indicates that the camera’s firmware has encountered an error. This is rare but can occasionally happen after an unexpected power cut (if the camera is in the middle of performing a task), due to incorrect settings in the camera (too many enabled tasks, conflicting settings etc.), or due to a faulty SD card. 

This can usually be resolved with a reset of the camera. To do this first power down the camera and leave it for at least 10-15 minutes, then follow the steps on the page linked below to reset the camera. Note: a reset will clear all changed settings in the camera and revert it back to the defaults.

How to reset the camera

If the reset does not clear the error then you should get in touch with our support team using the “contact us” form as they will be able to advise on the next steps to resolve the issue.

How to install and use Camera Live V1

How to reset a camera.

If you think you need to reset your camera we recommend you first get in touch with us using the “Contact us” form as a reset may not solve your issue and will wipe the camera of any user data, meaning you will need to set the camera up again.

But should you want to reset your camera anyway please use either of the guides below.

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

.

There are two ways to reset the camera: physically by pressing the hardware reset button or digitally via the camera’s web interface….

.

Physical reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.

5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.
For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paper-clip or similar.
9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

Digital reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.

8) log in to the camera interface on a PC, see the guide here on how to do this.

9) Go to Setting, Tools, Backup or Reset.
10) Click on Reset, then when it appears click on Reboot.
10) Wait 5 mins for the camera to power up fully, ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is admin (in lower case) for both.

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new. You’ll find the details here: http://ucam247.helpsite.io/categories/3646-camera-setup

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username:     admin
Password:      admin

We recommend trying these first to see if they allow you to login. 

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access. 

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Camera is rebooting often

Do you find the camera does not remain online for any length of time? If so this is usually a setup or a hardware error, typically with the SD card or the recording setup. Please take a look at the troubleshooting guides below to help resolve your issues.

.

SD card not working.

Too many tasks enabled.

Issues with power supply, outdoor cameras.

Cannot view the video from the app.

If you are having trouble viewing video in the app it is likely due to one of the issues listed below. 

Poor Wifi connectivity

p2p disabled

Privacy mode enabled blocking access to the live feed.

Live feed or playback is jerky and not smooth

The first thing to check will be that the camera has a strong WiFi connection. This can be checked in the app by going to Edit Camera, Advanced Setting, WiFi Setting and should be at least 50-60%. A poor WiFi signal can cause the playback of the live feed to be poor. Click here for advice if the WiFi signal strength is poor.

.

If the WiFi connection is strong, the next thing to check will be that the stream setup is set appropriately for your network. The defaults for this are below and can be found by logging in to the camera’s web interface and going to Setting, Camera, Stream Setup.

.

The H.264 bitrate should be left at the default of 1536, raising this can cause the camera to send more data than your router can cope with causing a jerky live stream.

The MJPEG stream should not be set higher than the default of 50. This is an uncompressed stream that is used for the cameras motion detection, not for recording or streaming, raising this can cause issues with the streaming as it puts a high load on the camera.

.

You should also check that you do not have too many tasks enabled, conflicting tasks can cause issues with the camera’s ability to stream well. You should only have one of task 7, 8, 9 or 10 enabled at any one time. For more information on setting up the task management page click here.

NVR IP address keeps changing.

You have setup and NVR with a camera successfully however it stops recording after a short time.

This may be due to your router assigning the NVR a new IP address very often. In this case the best way to prevent this from changing and your details in the Storage Setup page becoming incorrect is by setting the NVR to a static IP address.

To do this please take a look at our setup guide for Setting the NVR to a Static IP address.

Having Trouble With WiFi setup?

Does your WiFi use older WEP Encryption? If so click here

.

Not getting a wireless connection where you have placed your camera? Click Here for more information.

The app’s home screen allows you to see all your cameras’ latest activity at a glance, so you can quickly identify any potential security threats. The events gallery allows you to view all your cameras’ events at once or individually, making it easy to track activity over time.

With quick access to live streaming, you can now monitor your property in real-time, giving you peace of mind when you’re away. The app also provides important information on each camera’s status, allowing you to better manage and maintain your cameras.

The VOSKER® Sense AI Tools ensures that you receive notifications that matter to you. With advanced motion detection, you can customize alerts to receive notifications on your phone only when a person or vehicle is detected. This feature also reduces false notifications, so you’re not constantly bombarded with unnecessary alerts.

VOSKER cameras use 4G-LTE cellular network and are not compatible with Wi-Fi. To activate your camera with the supplied SIM card, you’ll need a VOSKER data plan, and you’ll need one plan for every camera on your account.

Take your surveillance efforts to the next level. Download the VOSKER mobile app today and experience the ultimate in remote area monitoring.

ACCESSING YOUR ACCOUNT

Use your login credentials to access your VOSKER account from the web browser. To access your account from your mobile, you will need to download the VOSKER app from Google Play Store (Android) or Apple App Store (iOS). You can modify your personal information or add other cameras to your account from either the web browser or the mobile app. You can also add other users, however, you must share the same email address and password.

HOW CAN I BUY A PLAN?

If you are using an Android phone, you have the option to purchase a plan either from your VOSKER mobile app or from the web browser.

For iOS users, you will need to access your VOSKER account from the web browser to purchase a plan.

VOSKER MOBILE APP :
To purchase a plan from your VOSKER mobile app,

VOSKER WEBAPP :

Once you login to your account, follow the steps below to purchase a plan:

*Remember that you can save up to 10% when you select a yearly plan!

.

VOSKER APP setup and User guide

HOW DO I HAVE ACCESS TO THE FREE PLAN?

V150
V150 comes with a 7-day free trial of our Elite plan that will give you unlimited photos and 40 HD photos for those 7 days. After your trial period is over, you’ll need to purchase a plan in order to keep receiving photos in your VOSKER mobile app. Photos will still be saved to the MicroSD card of your camera.

V200 and V100
You will receive a 30-day free trial of the Elite Plan where you will be receiving unlimited photos and can request up to 40 HD photos. After the first 30 days of activation on the unlimited plan, your camera will automatically transfer to the free plan where you will receive up to 100 photos a month. You can purchase a paid plan any time after the 30-day trial period is over.

HOW CAN I DOWNLOAD HD PICTURES ON MY PHONE?

Users are now able to get HD versions of their most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.
*except for the FREE plan

On the right top corner of each of your pictures you will find an HD icon. Click and your picture will start uploading.

View of the Mobile App:

HOW TO CHOOSE THE RIGHT TRANSMISSION PLAN FOR MY SECURITY CAMERA?

Cellular security cameras are great for monitoring your property remotely. A notification pops on your phone, and you see somebody lurking around the construction site, the farm or the marina.

This system relies on the data plan you will pick and the number of photo alerts included. But how do you know how many alerts you will need? We listed points to consider when buying your data plan.

Photo count

First, consider how many alerts you expect the security camera to send in a month. Since the data plan works off of a monthly allotment, having a rough estimate based on the 7-day free Elite trial is a good place to start.

Location may come into play. The number of photo alerts may vary if you installed the camera in an empty yard or at a busy security gate. How many times will people or vehicles pass in front of it daily? Also, consider other elements moving in front of the camera, like animals, objects, and weather conditions.

Settings

On top of this first estimation, you must factor in your camera settings preferences in the VOSKER app.

How many alerts are you ready to miss?

The camera saves photos on the memory card when you reach the monthly photo alerts. You will no longer receive any alerts in the app until the photo count is reset in the next monthly cycle or unless you upgrade the plan. It all comes down to your tolerance of missing information.

Test it

A great way to evaluate your needs is to get a monthly Elite plan for your newly installed camera. Test the settings to fit your objectives and monitor the photo count. Once the setup is steady, and you get a good idea of the photo alerts, it is time to pick the best plan and frequency.

Remember: you can save 10% off the monthly fee by purchasing the data plan annually.

Flexible

You may use your security camera at different locations or for different purposes within a year, affecting the number of photo alerts you need. Remember, you can upgrade or downgrade a monthly data plan*. It is also possible to suspend its auto-renewal if you need a break.

You now have all the tools to make the best decisions for your surveillance solution.

*Annual plan can only be upgraded with extra charges.

WHAT CAN I DO TO INCREASE MY PHOTO QUALITY?

Understanding the different features and specifications of the VOSKER cameras can help you choose the right camera at different locations on your property that will give you optimal photo quality. If you intend to set up the camera in a place where the objects are moving fast, choose a camera with a faster trigger speed to ensure the camera activates and captures the photo before the object moves out of the frame. Cameras that have a larger motion detection range are a better choice when you want to set up the camera over larger areas.

Here are a few things that you can do to improve the quality of your photos:

.

WHY DOES THE RESOLUTION ON MY PHOTOS SEEM TO BE LOW?

The photos that your camera is sending have been compressed to facilitate the transfer. You will find the best photo quality directly on the SD card inside your camera. You can also get HD versions of your most valuable photos upon request through the VOSKER App or the VOSKER web App*. Each plan has a limit of HD photos to download per month.

On the right top corner of each of your pictures, you will find an HD icon. Click and your picture will start uploading. *except for the FREE plan

WHY DO MY PICTURE COLORS LOOK WRONG?

If the color of your photos looks different than normal, E.g., Pink or Black photos, check the following:

CAN’T LOGIN TO MY VOSKER ACCOUNT.

If you are having issues logging in to your account, verify the following:

STEP 1

STEP 2

STEP 3

If following the steps above did not resolve your issue, please contact VOSKER support team for assistance.

HOW TO CHANGE MY CAMERA SETTINGS FROM THE VOSKER APP

To change your settings for your VOSKER camera, navigate to the “Settings” tab. Make sure to choose the correct camera from the dropdown option at the top. You will see 3 sections: Basic, Cellular Setup, and Advanced Options. You can change the settings under these sections according to your preference and select the “Apply Changes” button to save the settings.

Note: Our cameras communicate with our servers based on the frequency set in your settings. For example: If your Transfer Frequency is set to 2 times a day, this means that your camera will communicate with our servers 2 times a day.

VOSKER SENSE

VOSKER SENSE is a tool that uses artificial intelligence and enables you to easily differentiate between a human and a vehicle in a photo. All our plans, except the Free plan, include VOSKER® AI Tools. So, make sure you are on one of our paid plans. To use this feature,

HOW TO DELETE CAMERA FROM ACCOUNT

HOW CAN I SHARE MY PICTURES WITH SEVERAL PEOPLE?

WHAT IS THE RESOLUTION OF THE TRANSMITTED PHOTOS?

V200

V150 and V100

.

.

1.Download the mobile APP (Guard Viewer) and Sign up

for an Account

Download the mobile APP and Sign up for an Account

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

2.Add Device to APP(Guard Viewer)

Guard Viewer Security System User Guide v1

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

Add Device to APP(Guard Viewer)

Auto add is not suggested. Please tap on “Later” if you see this message box.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on  “ Menu” icon> Tap on “Devices”> “Add” ,

2.  Tap on “Scan”> “OK ” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at  Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4. add NVR by scanning device QR code and click on “save”

5.    Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6.  Select the device and tap on “Start Live View ”

3.Device shows “Offline” (system kit to app)

Device shows “Offline” (system kit to app)

1. If the device shows offline on the mobile phone app, we need to make sure the NVR is connected to the network perfectly or not

2. Go to your monitor that is connected to NVR, and check out the network status first navigate to this path first: “Menu–Network–Basic–P2P”, also check whether the device status is online or not,

3. Also go to “Menu–Network–Advanced”,to disable the “PPPoE”

4. if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply”. After that, go back to “P2P” and check if the device status is online or not

5. if you connect the network cable to the lan port or the lan/wan port of the router

We need to connect it to the lan port of the router,plz take a photo of yours for us to check.

.

If the P2P show connect the network ,but the app also show the offline,please delect the device on your APP and re-add it again.

4.Enable push alerts on APP

Enable push alerts on APP

5.Why I can’t remote view when the network is outside？

Why I can’t remote view when the network is outside？

.

Cause: Customer doesn’t follow the instructions on the user manual and add the device in a local adding way, so we suggest them to delete the device first, and re-add the device again like this FAQ

https://www.hiseeu.com/a/help/article/53969

6.APP Share Device

APP Share Device

One device is linked to one user only. The NVR system can only be controlled by one authorized account, which can share the device with others to prevent attack or hacking.

There are 2 ways to share the device with others. For the admin user, please follow the instructions to share the device:

1.Type in “Menu Icon ” and navigate to “Devices”

2. Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

3.Share the device by typing in the user name you want to share and selecting the function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigating to “Devices”.

4.Share the device by generating a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

7.Add Device on Guard Station PC Client Software

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

8.Guard Station shows “offline”

Guard Station shows “offline”

plz check local NVR is connected to network perfectly or not,If your NVR hasn’t connected to the network yet, it will show “offline” in your PC Client “Guard Station”

Plz go to your NVR that is connected to Monitor,

Check out the network status, first navigate to this path first : “Menu–Network–Basic–P2P” ,and check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” , After that, go back to “P2P” and check if the device status is online or not

9.Not Recording? HDD not working?

Not Recording? HDD not working?

Right-click the mouse from “Menu–Storage–Hard Disk”

If there is no hard drive information or Status shows Abnormal, the hard drive is having an issue

10.AHD5 Modify the Camera model

AHD5 Modify the Camera model

（Please notice that AHD5 cameras only the TVI camera model have the audio function，the AHD5 cameras we sell seperately is the AHD model so it should modify the TVI model to have the audio function)

1. Click the OSD Menu Control , then click the arrows to the Menu t hen click the icon to select the “VIDEO SETTING ”

2.Select the VDEO SETTING and click the arrow to enter.

3.Then Select the “TVI ” on the HD, then click the “APPLY&REBOOT “and then click the “RETURN “and the “EXlT” back to the Version

4.Finally Turn Audio On

11.Forget DVR Password

Forget DVR Password

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2. If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer)

In NVR interface, tap forgot password.

1. Scan the above QR code by APP “ME–General–Forget Device Password” , and the security code will be sent to your email address.

2. If you haven’t set up an email before, or have any difficulties resetting the password, please take a screenshot of this interface(Serial No. please also make the code is as clear as you can ), and email us at love@hiseeu.com , since we need the serial number to produce a new password by using an internal tool

12.One or two cameras are not working

One or two cameras are not wokring

(1) BNC Cable connected to Camera is broken

Step: Use another BNC cable to connect the camera to have a try

(2) The port of the DVR box is broken

Step: After changing the BNC cable, and still there is no camera image, plz insert the camera into another port of the DVR to have a try

(3) Camera is broken after troubleshooting with the steps （1）-（2）

13.Four cameras or above are not working

Four cameras or above are not working

Four cameras or above not working is an abnormal situation. It’s not only a camera issue, which could be related to a power supply or power splitter connected to four cameras

If the power supply or power splitter connected to four cameras is broken, which can’t provide power supply to cameras

Step:

(1）Change to another 12V 2A Power Supply to connect to four cameras to have a try. We wanna make sure if this is related to the power adapter

(2) Change another 1-4 way power splitter to connect four cameras to have a try. We wanna make sure if this is related to the power adapter

( If you do not have another power adapter/splitter, plz use the other power adapter connected to the four normal cameras)

After making sure the power supply or power splitter is doing fine, but still no camera image, which means the DVR box is having issue

4.Eight Cameras are not working

Eight Cameras are not working

Please check your camera connection is correct ， if the connection is correct ，

i t’s mostly possible the DVR box is having issue, and need a new DVR box replacement

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

15.How to record the event only？

How to record the event only ？

Please click the mouse to the Menu then click the “ Storage ” and then click the “ Recording Schedule ”，“ Select Camera ” then click the “ enable Schedule ” click the “ Audio Storage ” then select the color of record type and fill in the corresponding time and date.

.

Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision

The Following network settings must be checked before adding the device to Guarding vision App.

Method 1: From NVR Local menu

Step 1: Right Click on the NVR Monitor and select “Menu”.

Step 2: Select “Configuration” from the Menu options.

Step 3: Select “Network” and check the option “Enable DHCP” Click “Apply”

Step 4: Make sure your NVR/DVR obtained an “IPV4 Address” and “Preferred DNS Server” values automatically. If not, check your network settings and make sure your device is properly connected to your network router or switch.

Step 5: Select “Platform Access” and check “Enable”.  You will be taken to the service terms window.

Step 6: Create a “Verification Code” check the “Guarding Vision service terms” click “OK”.

Step 7: Click “Apply” to apply the settings. The status will change to “Online”. The QR Code being displayed on your device “Platform Access” page can be scanned with Guarding Vision app to add the device into your App. To proceed with adding the device into the app scroll down to “Adding NVR/DVR to Guarding Vision App”.

Method 2: From the NVR/DVR/IP Camera Web page.

Step 1: Input the IP address of the NVR into the address bar and login with the credentials.

Step 2: Go to Configuration  Network  Basic Settings

Adding the NVR/DVR to Guarding Vision App

Method 1: Using the QR Code

Download and install the Guarding vision app on the Mobile. Register and Create a Guarding vision account on the App.

.

.

.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code”. Scan the QR Code displayed on the NVR’s Monitor.
.

.

.

.

.

.

Step 3: Scan the QR code from the device sticker or Login to the device Local Menu and go to Menu  Configuration  Network  Platform Access to access the QR Code.
.

.

.

.

.

.

.

.

Method 2: Add Device with Serial Number
.

(Only the last 9 digits of the serial number are needed to add the device into the App.)
.

Step 1: Tap on the ‘+’ icon and select “Manual Adding”
.

.

.

.

Step 2: The serial number can be accessed from the device sticker. To access the serial number from the web config, go to Configuration  System  System Settings  Basic Information
.

(Refer to the figure below)
.

Step 3: Once the “Manual Adding” Option is selected, You will be directed to the Add device page with “Serial No.” Input the serial number and click on  to save.

.

.

.

Step 4: Click “Add” to add the Device.
.

.

.

.

.

Step 5: Input the Verification Code that was created and click “OK”.
.

(You can find the code from the device web Config. Go to Configuration  Network  Advanced settings  Platform Access.)
.

.

Step 6: Tap on “Next”. Create a Device name in the “Edit Alias” page. Tap “Save”
.

.

.

.

.

.

Step 7: Tap on “Guarding Vision” at the bottom of the app to see your device listed. Tap on the device name to view the cameras connected to the device.
.

.

.

.

.

.

How to Change Camera names on the App
.

• Slide the device name to the left to view the settings and share icons.

• Tap on the  Settings icon.

• Tap on “Linked Camera”

.

• Click on the Edit icon and input a desired name to the camera and Tap “Save” icon.

• 

Guarding vision Setup from browser (www guardingvision com)

.

Step 1: Open browser (Internet explorer/Chrome) and input the address www.guardingvision.com. And click on “Register” to register for a new account.

Step 2: In the registration page, input the mandatory credentials and select “Email” for registering with email or “Country Code” for registering by a phone number.

Step 3: Once the account is created, select “Device Management” and select “Add” to add a new device.

Step 4: In the “Add Device” pop-up window, input the device serial number (Last 9 digits of the serial number found on the device sticker) and click on “Search”.

Step 5: If the platform access is enabled on the device, then you should see the device on the “Add device” window. Click on the ‘+’ icon for the device. Click on the link for Enabling “Platform Access” https://app.box.com/s/ftj2keo6pvvvkpif9ukquyp7jrvhktwx.

Step 6: Enter the verification code found on the platform access page of the device. Click “Add”.

.

Step 7: Click “OK”. Now the device should be added into the Guarding vision account. To view video stream, download the Guarding vision ass on your mobile phone and login with the account credentials just created.

.

.

Sharing the device:

To share the device with another Guarding vision account, click on the “Share” icon next to the device name

Select “Email” for sharing by email or select “Mobile Phone Number” to share by mobile number. Click on the check mark next to the device and click “Share”.

.

Initialize/Setup SD Card from Guarding Vision App

SD Card Setup for IP Camera from Guarding Vision

.

Purpose:

This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.

(Note: When a brand new SD Card is inserted into a IP Camera, it has to be initialized/formatted before it can start recording data)

.

Steps to Initialize/Format the SD card

Step 1: Open the app, Select ‘Guarding Vision’ on the bottom left and slide the device name to the left and select the icon.

Step 2: Once in the device settings page select ‘Storage Status’

.

.

.

.

Step 3: In the storage status page, select ‘Memory Card’, which will take you to the ‘Initialize Storage’ page.

.

.

.

.

Step 4: In the initialize storage page, select Initialize. This will format or initialize the sd card and the sd card should be ready for recording.

.

Reset device with Guarding Vision

Reset NVR using Guarding Vision

Purpose:

The purpose of this document is to be able to reset an NVR with the vuarding vision account.

Currently Supported HINO devices:

NVR532P16-I4

NVR516P16-I4

NVR732-I8

NVR764-I8

Required Firmware:

V4.1.65 or above

Initial setup for enabling Password reset from Guarding Vision

Step 1: During the initial device setup, make sure the “Reserved Email Settings” option is checked.

.

.

.

Step 2: Since the Reserved email settings option is enabled, the following screen as shown in the figure below should appear. Input the email that you wish to receive a password reset verification code.

(Note: Please enter a valid email)

.

.

.

Resetting password from the Guarding Vision App

Step 1: On the NVR login screen, click on “Forgot Password”

Step 2: On the following screen as shown in figure below, select “Verify by Reserved Email” and click “OK”

Step 3: You will be brought to a screen with QR Code.

.

.

Step 4: Open the Guarding vision App on your phone and go to More  Reset Device Password.

.

.

.

Step 5: Scan the QR Code shown on the NVR screen. You should see a message as shown in the figure below.

Step 6: Check your email to find the verification code and enter the code in the field provided and click on “OK”.

.

Platform Access for Guarding Vision Offilne Issue

Guarding Vision Offline Issue

Purpose:

This document provides steps to fix the Platform Access “Offline” status issue on your NVR/DVR.

Solution:

The most common cause for “Offline” status is when the “Preferred DNS Server” space is empty. Follow the steps below to fix this issue.

NVR Local menu

Step 1: On the monitor connected to the NVR, Right click and go to Menu  Configuration  Network  General

Step 2: Enter the “Preferred DNS server” address as 8.8.8.8

(Note: If “Enable DHCP” is checked, you can check the option “Enable DNS DHCP” which will let the NVR/DVR pullup its own Preferred DNS Server)

Step 3: Click “Apply”. The device might take a few seconds before applying the new values.

Step 4: Now go to Menu  Configuration  Network  Platform Access. The status should show “Online”. The device might take up to 60 sec before showing the new status. Click “Back” wait 60 sec and check the status again.

(Note: You can scan the QR code on your “Platform Access” page to add the device directly to your Guarding Vision App.)

.

Guarding Vision Quick Setup

Guarding Vision Setup Instructions

Setting up the DVR/NVR

Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network.

Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If you have “Enable DHCP” and “Enable DNS DHCP” option on this page selected, then you do not have to perform this step)

Step 3: Select “Platform Access” and check “Enable” and create a verification code. Click “Apply”.

.

(Note: The QR code displayed on the platform access page can be used to add the device into the guarding vision app.)

Adding the device on Guarding Vision App.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code” to scan the QR code being displayed on the NVR monitor. Input the Verification Code that was created under “Platform Access” in the NVR.

.

.

.

.

Step 3: For Manual Adding, input the “Serial No”. For QR code, Scan the QR code from the device sticker or the QR code displayed on the NVR. (Note: You can also scan the QR Code you see on the monitor. Refer to Step 3)

.

Guarding vision sharing and registering

Guarding Vision ‘Register’ ‘Login’ and ‘Share’

Registering on Guarding vision

.

Option 1: Tap on the “register” option. Now in the Register page enter the Mobile Phone number and tap on “Get Security Code”. You will receive a code by “Text”. Input the code you just received and complete the process.

Option 2: Tap on “Register by Email Address” for registering by email. You will receive the security code to the email address entered.

.

How to select Login options on Guarding vision

.

To Login using a mobile number, tap on the “Login by Mobile Phone Number” option. Now input the phone number and password and tap “Login”.

.

.

.

.

Sharing a device on Guarding vision

​

Method 1: Sharing from the Primary account

On the Primary account, swipe the device name to the left to access the “Share” Icon. Tap on the Share icon. This will take you to the “Recipient” page.

In the “Recipient” page enter the email or phone number of the user you want to share the device.

When sharing, make sure the Phone number/email/username are entered as shown in the account details.

Finding Account Details:

On the bottom of the app, Tap on “More” and select “Account Management” to view the Account details like Username, Email address(if used to register) and Mobile Phone Number (If used to register).

.

.

.

Add Stand alone device to Guarding Vision

.

Adding a Stand Alone IP Camera to Guarding Vision App

Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access

Step 2: Check the “Enable Option” you will see a pop-up window asking to create a verification code. Enter the desired verification code and click “OK”

Step 3: You can view the verification code by clicking on the eye lid icon.

Step 4: Click “Save” and refresh the page. The status should turn from offline to online.

.

Step 5: Now you can add the device into guarding vision by entering the las 9 digits of the serial number which can be viewed by going in to

Configuration  System  System Settings.

.

Step 6: Open the guarding vision app on your mobile device and register for a new account.

Step 7: Click on the ‘+’ sign on the top right corner of the app and select manual add for serial number or QR code to scan the QR code on the device sticker

(Note: Playback can be viewed on the App for IP Cameras that support Micro SD Card)

.

Add Device with Static IP into Guarding Vision for Local Access

.

Add IP Camera to Guarding Vision with Static IP Address

Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App.

Note:

Method 1: Adding an online device in the local network

Step 1: Open Guarding vision App and select “Guarding Vision” on the bottom of the App. Click on the “+” icon on the top right to access adding menu.

Step 2: From the Add menu, select “Online Device”

.

.

.

.

Step 3: In the online device list, tap the device you want to add. You will be taken to a details page.

Step 4: The details page shows you the info of the device that you just selected.

(Note: Select the “Add Device to Guarding Vision Server” option available under the “Add” button for remote access over cloud. For this, the device should be connected to the network and  the “Platform Access” option should be enabled from the local menu/web menu for NVR/DVR. For a IP Camera, the “Platform Access” should be enabled from the web menu.)

.

.

.

.

Step 4: in the “Add Device” page, input the Username and Password for the device and click  on  icon on the top right corner to save the login credentials and finish adding the device.

The device should be added to your App.

.

.

.

.

.

Method 2: Manual Adding option

(Note: Using this method, you can add a portforwarded device with a public IP address.)

Step1: Open the App and click on the “+” icon on the top right to access the add menu. Select “Manual Adding”.

Step 2: Select “IP/Domain” to change the adding type.

.

Step 3: Create a name for the device by typing in the “Alias” option.

• Input the “IP address” of the device and the login Credentials. Tap on  icon on the top right to save the values entered.

(Note: If you have a device with a port forwarded IP address, you can enter that public IP address in the address space with the device login credentials.)

.

.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option (  ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu (  )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu (  ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note:  Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu.  Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

.

Features:

(Supported features depend on camera features)

For more information download the Alibi Cloud VS Mobile App User Guide.

iOS App

• 

.

Android App

• 

.

.

Alibi Cloud VS

Direct Camera to Cloud Video Surveillance

Our cutting edge cloud-based VSaaS offering has gained significant traction with dealers and end-users and is poised for significant growth in 2023 and beyond. If you are not selling cloud-based video surveillance then you are missing out on opportunities to recession-proof your business. We’ll be hosting demo sessions to show you how simple it is to install/setup and how it saves you time and money by avoiding truck rolls with an easy to use interface that helps you solve most issues remotely. And it is super easy for your customer to use as well, making it incredibly appealing for home and business installs.
Learn how this powerful solution is gaining traction in cannabis, medical, retail/restaurant and education applications.

.

Brivo Cloud Access Control

Brivo + Alibi Security: Better Together

Brivo and Alibi Security bring you the best of both worlds… Unlimited access to Brivo’s world-class solutions and support, plus Alibi’s dedicated sales support & innovative marketing platform. The Brivo Accelerate Program is designed to help accelerate growth of YOUR access control business!

.

Alibi Arsenal

Our FREE Marketing Engine, Ready to Power
Your Business

Marketing is not easy. Alibi Arsenal business growth tools and resources make it easier. This FREE platform can help you generate leads with brandable sales/marketing flyers, get found online with improved Google My Business setup and to turn your current customer base into advocates through a powerful reviews engine. Plus, we give you access to tools that make it easier to tap into your current customer base to generate incremental business by cross-selling products and services.
Come by for a LIVE demo of this platform and to learn how you access these powerful tools.

.

Expect More from
Your Security Provider

.

Alibi Security is a trusted provider of security technology, cloud solutions, and growth enablement services—serving thousands of security professionals for more than 35 years. We are committed to quality, continuous innovation, and the investment in the PEOPLE, SOLUTIONS, and SUPPORT required to help our Dealer Partners succeed.

.

.

Enterprise Performance
– Without Breaking the Bank

Alibi Cloud VS makes enterprise-level cloud surveillance accessible for virtually any-sized application or budget. Featuring an ultra-secure camera-to-cloud architecture, Alibi Cloud VS dramatically reduces your up-front hardware investment and maintenance requirements, saving you valuable time and money. Ideal for both business and residential applications, Alibi Cloud VS is remarkably scalable – and can easily support larger camera counts and multi-site projects.

Centralized
Management

View cameras from single or multiple locations via a single dashboard, simplifying management and streamlining review of your video evidence.

Eliminate Common
Failure Points

Stream directly from camera to the cloud, ensuring you never lose video footage due to a faulty recorder or failed hard drive.

Enhanced
Security

No port forwarding necessary. SSL/TSL handshakes are used to make the connection from camera to cloud, ensuring encrypted transmission up and down. Video is stored in ultra-secure Tier 4 data centers, featuring triple-redundancy and fault-tolerant infrastructure to ensure your evidence is always safe.

Lower Total Cost of
Ownership (TCO)

No recording equipment, minimal maintenance requirements, and on-demand scalability – so you only pay for what you need, when you need it.

.

.

Before referring to this Mobile Application User Guide you must first download and install the mobile application on your mobile device (smartphone or tablet). You can find links to the mobile application(s) on www.alibisecurity.com at the following location:

.

SUPPORT Menu > DOWNLOADS > ALIBI CLOUD VS MOBILE APP

.

Choose the link that applies to your mobile device (iOS or Android), download and install the application. Now you are ready to install and activate cameras.

.

Adding a Camera via the Mobile Application

.

The first time you login to the mobile app, you will be required to enter your username (email address) and the password. The screen will show no cameras attached to your account. You will tap the ADD A CAMERA button on the screen and it will prompt you with a second screen to select the type of camera you want to install. Tap on the ADD A CLOUD CAM section. The next screen gives you specific instructions for attaching your cloud-enabled camera to the network.

.

IMPORTANT: All POE and WiFi cameras must be hard-wired into the local network in order to be discovered by the Alibi Cloud VS solution.

.

Once you have connected the cameras you want to add to your Alibi Cloud VS account to the local area network (LAN) you can tap the CONTINUE button.

.

.

..

.

The next screen displays your local network and the cameras that are available to be added to your Alibi Cloud VS account. Tap on the camera you want to add from the list and you will be prompted to name your camera. Type in a name and choose CONTINUE. The system will ping your camera, check credentials and firmware and connect. You should receive a confirmation screen that the camera has been added then tap CONTINUE.

.

.

.

..

.

To get your WiFi camera to the wireless network you need to connect the WiFi camera to the wireless network. Tap the zone that the WiFi camera is in. This takes you into the camera selector menu. Select the WiFi camera you want to attach and it will open the camera settings menu. On the main screen, under NETWORK

SETTINGS, it will say “Not Connected”. Select this menu option and it will take you into the wireless connection menu, displaying the available wireless networks to connect to.

.

.

.

.

Tap the wireless network you want to attach the camera to. A login screen will open up asking you to enter the password for the wireless network. Enter the password and tap CONNECT. The system will them connect the camera to the wireless network and you will receive a confirmation screen once completed.

.

IMPORTANT: You must keep the WiFi camera hard-wired into the network until you login to the wireless network. Once you get the camera connected to the wireless network you can disconnect the network cable and move the camera anywhere that it has good signal strength to connect to the wireless network.

.

.

.

.

.

.

From the main dashboard screen you have two different ways you can add additional cameras to the system. If you want to add another camera to the same zone you already have setup, simply choose the zone on the main dashboard screen, it will pull up the camera viewing screen and you will tap the Gear icon at the bottom. It will open a screen that shows the current camera(s) assigned to the zone and the ADD A NEW CAMERA button.

Tap this and follow the instructions to add a new camera.

.

.

The second option for adding cameras is to setup a new zone and add the camera to that new zone. From the main dashboard screen tap the + icon in the top left corner of the screen. This opens a new screen that lets you setup a new zone. Click ADD CAMERA and then follow the instructions for adding a new camera explained previously in the User Guide.

.

.

From this menu you can also move cameras currently signed to other zones to the new zone. Simply click SELECT CAMERAS FROM OTHER ZONES. A menu will be displayed showing cameras already attached to other zones. Click the camera and move it to the new zone.

.

After adding the camera you will be taken to the main camera dashboard screen. From this view you can see all of the zones cameras have been assigned to. Select the zone you want to view. An individual thumbnail view of the camera(s) will be displayed. Tap on the gear icon at the bottom of the screen and it will take you into the settings selection menu. Choose the arrow to the right of the camera that you want to adjust settings for and you will be taken to the settings menu for that specific camera.

.

.

.

.

.

.

.

.

.

.

.

PoE Camera Setting Menu

.

.

.

.

.

.

.

WiFi Camera Setting Menu

.

In the settings menu for each camera you are able to control the following settings:

.

.

Account Settings and TouchID/FaceID Login

.

After you login and add a camera to your system you can select the home button at the bottom left of the screen and it will take you to your main dashboard. Select the person icon in the upper right and this will take you into account settings. From here you can enable remote support access, enable/disable push notifications and enable TouchID/FaceID login for easy access when starting the app.

To view live video from your cameras connected to Alibi Cloud VS, go to the main dashboard screen and select a zone to view. Once in the zone, you will see the individual cameras with ‘play arrows’ located in the middle of the thumbnail screen. Simply click on one of the ‘play arrows’ in the thumbnail and live viewing will begin. You will see the word “LIVE” appear at the top of the thumbnail viewing screen. Want to enlarge the viewing area? You can simply turn your smartphone/mobile device to landscape to view in full screen mode.

.

Viewing recorded video (footage) is also very simple. You will need to choose the zone that includes the camera you want to review recorded video from. This will display thumbnail views of all cameras associated with this zone. If you have multiple cameras in a zone, you will see multiple thumbnails. To view recorded footage for

a specific camera tap the clock/rewind icon ( ) at the bottom of that camera thumbnail view. This will take you into the footage screen where you can review a timeline, with detection events noted. You can scroll through the timeline by scrolling with your finger, either up or down, to view events that happened earlier or later in the day.

.

.

There are settings and features on the playback screen that make it easier for you to review video quickly. You can select the ZOOM IN button and the timeline will appear in smaller increments, allowing you to find events more accurately. You tap the MORE menu and adjust playback up to 10x faster than normal.

The SUMMARY button at the bottom of the page lets you create and download a video summary of detection events for the last 24 hours. Simply click the button and the app pulls detection events into a single summary video. Creating a summary takes a few minutes and once completed you have the option to save the 24 hour summary to your mobile device or share it with someone else.

.

If you have forgotten your password or simply want to reset it, you can easily do this by selecting the person icon in the main dashboard screen. Click ‘Logout’ and on the next screen tap ‘Log In’ and it will take you to the main login page. Tap ‘Forgot Your Password?’ and a screen will appear for you to enter your email address. By entering your email address and clicking ‘Send’ you will receive a secure link in your email to reset your password for your Alibi Cloud VS account. This new password will be valid in desktop and mobile apps.

.

.

In scenarios where you already have a cable installed between the network and, say, your garage, where installing more cables is difficult, having to run a second cable is not ideal. However, we’ve discovered the Vigitron Netmux Vi00103 POE Multiplexer, a great gadget that combines two POE ports on your network side into one cable, and then splits them again at the camera-end, to solve this problem.

Below is some more important information on the specification and capabilities of the Vi00103, as well as our 6-step instructions for using it correctly.
.

Connecting multiple IP Cameras together v1.

Instructions:​

Step 1:
.

Connect the two RJ45 cables from the Vi00103RX combiner, labelled “Port 1” and “Port 2”, to two available POE ports on your POE switch or NVR.​

​

NOTE – The cameras do not need to be activated with a password. If you are connecting them directly to an NVR, then the Plug & Play feature will still work and activate the cameras; If you are connecting them to a separate POE switch, you will be able to access them and activate them on your network later. Plug & Play setups will also work when cameras have already been activated, as long that these are set with the same password as the NVR and have DHCP enabled. ​

.

Step 2:
.

Connect your single Cat5/6 cable to the port on the Vi00103RX combiner, which is labelled as “Port 1 + Port 2”.​

​

Step 3:
.

Now, plug in the other end of the long single cable to the Vi00103TX splitter’s “Port 1 + Port 2” RJ45 port.​

​

NOTE – this cable cannot be longer than 100m / 320 feet​

​

​

Step 4:
.

Connect your IEEE802.3af/at IP cameras or POE devices to each of the ports, labelled “Port 1” and “Port 2”, using another Cat5/6 cable for each.​

​

NOTE – the length of these cables, and the long single cable between the Vi00103RX and Vi00103TX cannot exceed 100m / 320 feet in total, as this is the maximum standard range of POE. ​

​

Step 5:
.

Green lights should appear on the Vi00103TX to confirm that each of the ports is delivering POE to your devices. If they do not, check the power supply to your POE source and all of your Cat5/6 cables are secure.​

​

Step 6:
.

If you are connecting the cameras directly to an NVR as “Plug & Play”, then they will connect and appear automatically after a minute or two. Alternatively, if you are connecting them to a separate POE switch, then they should be discoverable on the network and allow you to adjust any network settings so you can add them to your CCTV system.​

.

.

Key benefits:​

.

Limitations & key points to consider:​

.

Network topology diagram & dimensions:​

.

Can I connect more than one camera via a POE switch to a single POE port on my Hikvision NVR?

In some scenarios, it can be useful to have several cameras connected to a POE switch but to keep that switch directly connected to your NVR rather than the local network.

If you are able to connect each camera to its own POE port on your NVR, then this is generally advisable, as using a Plug & Play setup is much simpler and avoids the need for extra hardware or power supplies.

However, if your NVR is closer to your POE switch than it is an available access point to your LAN, then it can make connecting the cameras simpler whilst avoiding the need to have an ethernet cable running from each camera back to the NVR.

One other benefit of keeping the cameras connected directly to your NVR this way, rather than connecting them across your LAN, is that the connection does not rely on your router being operational. Provided the NVR and POE switch are working, the cameras will remain connected and recording regardless of any problems that might occur with your local network.

These seven steps below explain how to connect multiple cameras on a POE switch to a single port on your NVR.
.

.

.

Important things to note:​

How do I use a Hikvision NVR’s “Virtual Host” feature?

One of the most successful selling points of a Hikvision NVR to many small-setup customers is the “Plug and Play” functionality that simplifies the setup process of their surveillance system. However, plugging a camera directly into a port on the NVR, unfortunately, does not allow you to access the camera via its own internal LAN IP using a browser due to it being on the NVRs internal network, and this can significantly reduce the number of configuration options you have access to.

The NVR does allow you to configure many options for each connected camera, but some essential features are only accessible via connecting to the camera itself (such as audio codec options). This was of course a big problem previously.

With the advent of newer firmware and models of NVR, Hikvision has introduced a feature called Virtual Host. Activating this feature turns your NVR into a “host” for the cameras allowing you to connect to them via a browser. Essentially, the NVR forwards all traffic received from your browser to the appropriate camera you’re trying to connect to, eliminating the biggest problem of plug and play functionality.
.

.

Step 1:​

First of all, access your NVR via a web browser. If you do not know the LAN IP of your NVR, download Hikvision’s tool SADP tool, which scans your network for any Hikvision devices that are connected and allow you to see and change their network settings, including the IP address.​

​

Download SADP for Windows ​

Download SADP for MacOS​

.

Step 2:​

Once you’ve logged in, navigate to: ​

​

Configuration → System → Camera Management​

.

​

.

This screen displays all the connected cameras on your NVR. Notice that the final column labelled “Connect” is currently empty. We’ll be coming back here in a moment.​

.

Step 3: ​

Now, navigate to:​

​

Network → Advanced Settings → Other ​

​

Turn on the Enable Virtual Host option.​

​

Note – Your NVR will reboot when you click “Save”.​

.

.

​

Step 4:​

Now, navigate back to the Camera Management window from earlier. You’ll notice that the previously empty connect tab now features links for each camera currently connected to your NVR.​

.

​

Step 5:​

Click on any of these links to access the respective camera via your web browser:​

That’s it, you’re done!

This should be useful when you want to access options on your camera that your NVR doesn’t feature. If you have any further questions feel free to ask, we’re happy to help.

Lorex was the first to market 4K resolution security cameras and more recently released the Fusion Collection, which offers recording for both wired and wireless cameras.

.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cloud App. Refer to the Lorex Cloud App Product Compatibility Chart for a list of compatible recorders.

.

Changing Your Password via Your Recorder

.

Retrieving your device ID

Lorex Devices Password Reset Detailed Guide.

Changing or Resetting Your Recorder’s Password

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex App. Refer to the Lorex App Product Compatibility Chart for a list of compatible recorders.

.

Table of contents:

.

Change or Reset Your Recorder’s Password Through the Lorex App

.

Change Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (New Local UI)

.

Change Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

.

Change Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cirrus App. Refer to the Lorex Cirrus App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Cirrus App

Note: You cannot reset your password with the Lorex Cirrus App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Cirrus App.

1.Tap the  icon in the top left corner of the Lorex Cirrus app.

2.Select Devices.

3.Tap Edit under your desired recorder.

4.Tap Change Password.

5.Fill in the required fields as follows:

.

Changing Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

.

Resetting your Password

1.Login to your system using the reset password.

2.From the Live View screen, click >  Setup > User.

3.From the list of accounts, find the row for the account you want to update and click 

This password will be used to connect to your system from now on.

.

Resetting Your Password (LHA / LNK Series)

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Pro App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Pro App. Refer to the Lorex Pro App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Pro App

Note: You cannot reset your password with the Lorex Pro App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Pro App.

1.Tap the ellipses (…) above your desired recorder in the top right corner of the app.

2.Tap Device Settings.

3.Tap  in the top right corner of the Device Settings page.

4.Tap Modify Device Password.

5.Fill in the required fields as follows:

.

Changing or Resetting Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

How to Reset Your Password

There are different processes to reset your password for different types of Lorex products or accounts.

Please select the type of password reset you need:

How to Reset Your Lorex App Account Password

Please note that your Lorex Account and Lorex App account email and passwords are the same. Changing one will automatically change the other.

There are two ways to reset your Lorex App password:

Method 1: App

1. Click Forgot Password on the main app Login screen.

2. Enter your email, a new account password, and click Get Activation Code.

3. Enter the 6-Digit Verification Code sent to your email and click ok.

Method 2: Website

1. Click Recover Password from the Lorex Login page

2. Enter your email address associated with your Lorex Account and click Recover

3. Check your email for your Verification Code.

4. Return to the Recover Password page and input your email address, new password, and verification code that you received.

5. Click Reset and then login using your new credentials.

Further Support

Resetting Your Lorex App password

Resetting Your Lorex Account Password

How to Reset Your NVR or DVR’s Password

Please follow the steps for the app associated with your Recorder

Lorex Recorders Using the Lorex App, Lorex Cirrus App or Lorex Cloud App

Request a temporary password from the website to reset your recorder’s password:

Note: It is necessary to register your product for warranty to request a temporary password for your Recorder.

1. Login into The Warrany Section of Your Lorex Account:

2. Register Your Warranty:

3. Reset Device Password:

4. Use Your Temporary Password:

Further Support

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

.

Support Hours Eastern Time:

Mon to Fri: 10:00AM – 9:00PM

Sat & Sun: Closed

How to Locate Your Recorder’s System Information

To complete the temporary password request form on the website, please gather the following information:

System Date: Located in the top-right corner of the screen once the recorder is powered on.

Device ID: Located on the QR code sticker attached to the outside of your recorder.

Device Model: Located in the INFO section from the Quick Menu of your recorder (the device ID can also be found here).

Once you have the Device ID at hand, please take a picture of the Device Info screen and the sticker with the serial number found on the unit.

.

How to Reset Your Smart Home Camera’s Password

To ensure your privacy and prevent any unauthorized attempts to gain access to your camera, there is no way to reset your smart home camera’s password. The camera will have to be reset to its factory default.

How to restart or factory reset your IoT Device:

Further Support

Wi-Fi Security Camera – How to reset your device

How to Reset Your IP Camera’s Password

If you have forgotten the password to one of your IP security cameras, you will either need to reset the camera manually. Please see your camera’s documentation to see if there is a reset button.

Reset Button:

If your IP Camera includes a reset button, you can hold the button down to revert it to its default setting. This will allow you to set up the camera again through your NVR with a new password.

Wi-Fi Security Camera – How to change password

We recommend using strong passwords for the Lorex App app and all cameras connected to it, and changing them on a regular basis.

This guide applies to the following products: W281AA, W282CA, W261AS, W261AQ, LNWDB1, and V261LCD.

.

How to change device password

Here’s how to change the password of your camera.

Step 1. Launch the Lorex App app, and tap Device Settings.

Step 2. Tap the Name of your device.

Step 3. Tap Device Password.

Step 4. Enter your Old Password, followed by the New Password, Confirm Password, and tap the Save icon.

NOTE: You’ll get a prompt that you’ve sucessfully updated your device password.

.

How to change Lorex App account password

Here’s how to change the password of your Lorex App account.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Tap Change Password.

Step 5. Enter your Current Password, followed by the New Password, then tap Done.

NOTE: You’ll get a prompt that you’ve sucessfully updated the password of your Lorex App account.

You’ll also be loggged out automatically. You must re-login using your new password

.

How to enable or disable fingerprint login

If your smartphone supports fingerprint login, you can use it to sign in to your Lorex App.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Toggle Fingerprint Login button to ON (to enable it) or OFF (to disable it).

.

About this Document

Safety Instruction

.

●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the device and shall be easily accessible.

●For the device with the sign  indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.

●Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Do not ingest battery. Chemical Burn Hazard!

●This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

●Use only power supplies same with the original model, or LPS power supplies with the same voltage and electric current.

Preventive and Cautionary Tips

.

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.

●The device shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

●No naked flame sources, such as lighted candles, should be placed on the device.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains. The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.

● identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

● + identifies the positive terminal(s) of the device which is used with, or generates direct current, and – identifies the negative terminal(s) of the device which is used with, or generates direct current.

●If the device has been powered off or placed for a long time, its coin/button cell battery may run out power.

●When the coin/button cell battery runs out power, the system time would be incorrect, please contact the after-sales service to replace the battery.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Do not touch the sharp edges or corners.

●When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to make the HDD temperature in S.M.A.R.T. below the stated value.

●Provide a surge suppressor at the inlet opening of the device under special conditions such as the mountain top, iron tower, and forest.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.

●The serial port of the device is used for debugging only.

●If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure.

●If a power adapter is provided in the device package, use the provided adapter only.

●For the device with sticker or , pay attention to the following cautions: CAUTION: Hot parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching off before handling the parts.

●If the device needs to be installed on the wall or ceiling,

1.Install the device according to the instructions in this manual.

2.To prevent injury, this device must be securely attached to the installation surface in accordance with the installation instructions.

●Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power adapters may decrease.

●Make sure that the power has been disconnected before you wire, install, or disassemble the device.

●If the device needs to be wired by yourself, select the corresponding wire to supply power according to the electric parameters labeled on the device. Strip off wire with a standard wire stripper at corresponding position. To avoid serious consequences, the length of stripped wire shall be appropriate, and conductors shall not be exposed.

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Hikvision New GUI 5 User Guide

Content Convention

.

In order to simplify description, please read the following conventions.

.

.

.

Reason

Solution

.

Note

If your video recorder notifies not support this function, you can log in to the camera, and adjust video parameters via web browser.

.

Reason

The camera password is too weak.

Solution

Change the camera password.

.

.

Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

.

.

.

Reason

The camera encoding format mismatches with the video recorder.

If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/ MJPEG, change the camera encoding format to the same as video recorder.

.

.

Solution

Check if the encoding type at live view toolbar is H.265.

.

.

Reason

The video recorder uses the same IP address as other devices.

Change the IP address of video recorder. Ensure it is not the same as other devices.

.

Intelligent Operation – Smooth UI experience

Intuitive live view

• Check the real-time channel status clearly

• With customized views, live views can be more intuitive on one view layout and enable automatic switching to meet the needs of multi-screen timed switching

The conventional video searching methods usually are time-consuming. Right now, the Smart Search and the AcuSearch functions could help accelerate searching efficiency in minutes, even in seconds.

Smart Video Searching

The NVR 5.0 with converged functions provides support for video, audio, alarm, access control, and other application access. Creating intelligent applications for different scenarios and needs.

The tool allows adding and monitoring a large number of cameras simultaneously. The cameras in your network can be automatically found and installed. The program supports IP and P2P connection modes as well as UMSP, HZXM, and HZZN protocols. It could also be necessary to provide the camera’s password to access it. After this step, the devices can be organized by grouping them into different folders. For monitoring purposes, it is possible to divide the workspace into up to 64 regions. Moreover, on the left, there is a panel, from which you can control the selected camera.

In addition to allowing the users to view live video streams, the program also lets you schedule recording sessions and play them later. Likewise, it can take snapshots of specific video frames. Moreover, you can implement alarms to send notifications to a given SMS number.

All in all, QmEye is an excellent solution in terms of the number of cameras and connection protocols allowed. Unfortunately, the tool is not as easy to use as other similar tools and its graphical user interface probably needs a redesign.

This manual has mainly instructions on the installation and usage in Android, iPhone mobile phone.

1.Android

This cloud service platform is the best mobile phone video during the internet era. It consists of front-end acquisition devices, platform servers, and remote view of three parts.

Open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application.

Icon description：

Notice: Please click “LoginFree”, directly into the system, without verifying user name and password. And you can get help information without login.
1.1 User register
User register

Click the button “register” on the login menu, then will jump to the register interface.

Enter the register information, click “register” then will be registered.
Note:1 please enter the valid E-mail address in order to retrieve your password when you lost it.

2 No account login version, no such function! 

retrieve the password

On the register clicking the button “login” and jump to “retrieve password” interface.

Input the username, click button “retrieve password”.

If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” information will be sent to the email address.

QMeye User Manual 2024

1.2 Real-time preview

In the main menu, clicking “real-time preview
Click “Favorites” button, go to “collection management” interface

Click on the icon, favorites list change into editing state, click icon, you can delete your favorites.
Select one of the devices on “Live list” enters the video preview interface.

Button instruction：

1.3 device management

Click the button” device management” on the main menu and enter “device management” interface.

Icon instruction：

Modify the connection parameter

Click on the icon, select “modify connect parameter”, then into “modify device” dialog box：

A）Click on the icon, return to the device management lists.
B）Click on the icon, save the current configuration.

Modify the name

Click on the icon, select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box.

A）Click “OK” button to save the current configuration.
B）Click “cancel” button to cancel the modifying.
Delete

Click on icon, select “delete’ button to delete the current device directly
Add the catalogue

Click on icon, select “add the catalogue” option, then pops up “add the catalogue” dialog box

A）Click “OK” button, it will be saved the current configuration. Then will be showed in the device management list.
B）Click button “Cancel” to cancel to add the catalogue.
Add the device

Click on the icon to select “add the device” option.

Icon instruction

Add the shot

Please see the operation introduction of “add devices”.

Search the local device

Click on the icon to enter “search” dialog box. If there are some devices in local place, you would search out the corresponding device.

Icon instruction

Click on the icon, then pop up the menu as follows:

A）Add a device: add DVR (multi- channel)
B）Add a shot: add a single camera (single channel)
C）Modify the name: modify the name of the device or shot
D）Modify IP: Modify the IP address, subnet mask, gateway information
E）Modify the device password

1.4 Playback

Click button “playback” option in the main menu, and then select to playback the video.

After select an event type, start time and end time, clicking on the icon will list out the remote video lists, and then click on the item will be selected to play or download videos.