The VDG Sense app features:
– Add servers: add multiple VDG Sense servers to your app, making it incredibly easy to switch between servers and different sites.

– Select cameras: select your camera by swiping horizontally and vertically through camera locations. Recognize the video channel by thumbnail and camera name.

– View: view images full screen with one-tap zooming. Zoom in on any object by simply tapping the live video. View the next or previous camera by swiping horizontally.

– Control: control any PTZ enabled camera in VDG Sense directly, using the joystick control for pan/tilt and zooming in landscape position. Quick selection of the first six pre-sets available on your camera.

– Store: save any incident directly to your photo library by tapping on the image icon. Share the images by using your choice of any other app, such as your e-mail app or messaging app.

Chapter 1 – Introduction

This manual explains all necessary steps to create a fully functional Sense installation in a relatively short time. It assumes a simple standalone or single-server, single-client setup where all components are configured and accessible via the network:

Sense Server-Client installation:

Chapter 2 – Installation

To install VDG sense the VDGSenseSetup.exe is required. It can be downloaded in the support section here: https://support.tkhsecurity.com/downloads/software/ website. It is a single executable installer which include all required components to install VDG Sense as server, client or standalone system. The diagram below shows the components of VDG Sense Setup.

2.1 Versioning

After starting the VDG Sense Setup the first page the version details page. It shows version information of all included and already installed Sense components.

2.2 Standalone installation

To install VDG Sense as standalone system check both ’Client’ and ’Server’ boxes. It will install the following Sense components:

2.3 Client installation

To install the VDG Sense client, only select the ’Client’ checkbox. It will install the following Sense components:

2.4 Update

The installation package VDG Sense Setup is also used to update VDG Sense to a newer (or lower) version. Use the same procedure as described in paragraph 2.2 and 2.3. IMPORTANT: an update will not remove the license or settings.

Note: Upgrading older VDG Sense versions to the latest VDG Sense version requires special attention to our upgrade instructions which can be found in our knowledgebase:

*Upgrading/Downgrading VDG Sense

Chapter 3 – Starting VDG Sense client

3.1 Signing in

Installing VDG Sense as client or standalone system will put a desktop icon with the name ‘Sense Client’. By double-clicking on ‘Sense Client’ the application will start and show the login dialog, see below.

It contains the following items:

3.2 Menu

After signin the main application starts by showing the top menu bar. If a user with administrator rights signs-in, no layout will be shown. If a normal user signs-in either the first layout in the layoutlist is shown or the multi-layout which is configured as default.

From left to right the top menubar functions are:

Chapter 4 – License

Sense is protected by a software license key. In order to use the product a software license file is required. A Sense license only needs to be applied to the ‘Sense Video Manager’. As ‘Sense Video Manager’ does not have a graphical user interface the license needs to be uploaded and activated using the ‘Sense Client’. The license key can either reside on the license USB stick or provided by e-mail.

4.1 Upload license

Activation is the process by which the software and license key are validated to ensure that they are used in accordance with the purchased license and services. Activation is intended to protect your end user rights as well as TKH Security’s rights as a software author. Only genuine Sense software entitles you to critical updates and technical support. You may not be able to use Sense software if it is not activated.

Requirements

4.2 Activate license

4.2.1 Online activation

4.2.2 Offline activation

Save license file

Chapter 5 – Configuration

Sense settings are visible after clicking the toolset icon in the topbar menu. Settings are grouped in tabs where each tab holds specific settings related to the name of the tab. Normal procedure to setup a Sense system is to work through the setup tabs from left to right, starting with the server tab and ending with user management. Configuration is normally done using the administrator account.

5.1 Servers

The server tab holds the list of servers and settings related to the selected server. From left to right you see the serverlist, the cameralist of the selected server, settings of the selected server and server statistics related to CPU, memory, network and harddisk load.

 5.1.1 Add via find

Click ’Find’ in the lower left corner of the screen to open the find dialog. After a few seconds it shows the list of all servers found in the local network on all NIC’s. Select the server(s) and click ’Add’ to add selected server(s) to the configuration and close the dialog.

5.1.2 Add manually

To add a server press ’+’ in the lower left corner of the screen. Enter the server address in the dialog which appears. On a standalone system the localhost server (127.0.0.1) is automatically added to the list. In a server-client configuration the server is also automatically added to the list after login.

5.2 Devices

A list of Sense-compatible devices can be found here: https://support.tkhsecurity.com/compatibility-list/camera/

The ’Devices’ tab contains the list and configuration of devices for the selected server. The server can be selected just below the ’Server’ tab.

The devicelist has three sections which are from left to right:

5.2.1 Add via find

Click ’Find’ in the lower left corner of the screen to open the find dialog. After a few seconds it shows the list of all devices found in the local network on all NIC’s, including intercom servers and IO devices. Select one or more cameras and click ’Add’ to add selected devices to the configuration. It will also close the dialog.

5.2.2 Add manually

Click ’+’ in the lower left corner of the screen to add a new device to the list.

Fill in all required fields to connect to the device. See the list below for explanation on the fields.

5.3 Layouts

The ’Layouts’ tab is used to configure all (multi)layouts. Layouts are required in operator mode to display live or recorded video or to handle (video)events. They can be custom designed to fit the needs of the operator.  The layout manager is a floating menu which is used to create, delete and modify (multi)layouts and panels.

A layout consists of panels where each panel has a specific function. For instance a panel can be used to display live video, recorded video, for playback controls, display a map or to manage events. The complete list of panel types can be found in the ’Type’ list in the panel section of the ’Layout Manager’.

5.3.1 Live layout

Click ’New’ in the ’Layouts’ menu of the ’Layout Manager’ to create a new layout. The following dialog will appear:

This dialog provides three ways of creating new layouts:

The icon in the lower left corner of each panel identifies the type of panel. A panel for live video uses a camera icon as identifier. After selecting a panel its properties are shown in ’Panels’ section of the Layout manager. To assign a deviceto the selected panel select the camera in the ’Device’ list of the panel properties.

5.3.2 Playback layout

Click ’New’ in the ’Layouts’ menu of the ’Layout Manager’ to create a new layout. The following dialog will appear:

This dialog provides three ways of creating new layouts:

This layout is composed of 4 playback-panels in the upper half of the layout and controls to actually playback recorded video in the lower half of the layout. The panel to display recorded video uses a triangle icon as identifier. To assign a camera to the selected panel select the camera in the ’Devices’ list of the panel properties.

5.3.3 Multi layout

A ’Multi Layout’ is a group of layouts with a pre-defined monitor selection. It is used to quickly assign several layouts at once to different monitors. They are also used to define the default layouts to be displayed based on which user logs in. User Management is explained in the next paragraph. To create a multi-layout click ’Edit’ in the ’Multi-Layout’ menu of the layout manager, a dialog will appear:

On the left side of the dialog is the list of multi layouts. Multi layouts can be added, removed or edited by using the buttons below the list of ’Multi layouts’. On the right side of the dialog is the list of monitors which belong to the selected multi layout. Monitors can be added or removed using the buttons below the ’Layouts’ list. The monitor numbering corresponds to the monitor numbering in the ’Monitors’ tab and in the top menu bar. To assign a layout to a monitor, select one from the list of layouts next to the monitor icon.

NOTE: a layout only can be assigned once per multi layout. When finished click ’Close’ to close the dialog.

5.4 User Management

Sense User Management provides the administrator with the ability to control the access level of users logged in to Sense. Access to cameras, servers, layouts and several other functions can be limited to groups of users. In Sense this is called a ’User Group’, it holds the privileges of users assigned to the group.

5.4.1 Users & Groups

The Users & Groups is used to manage all user related settings in Sense. On the left side of the screen is the list of user groups. User groups can be added, removed or modified using the buttons below this list user groups. On the right side of the screen are the privileges which can be assigned to the groups, divided by subtabs.

Click the ’+’ button at the bottom below the group list to add a user group, a dialog will appear where the name of the user group can be entered. Click ’Ok’ in the dialog to create the group and close the dialog.

Create User:

Click ’+’ below the ’Users’ list in the users subtab to create a user. A dialog appears where the name, username and password of the user can be entered.

Create Devicegroups:

A devicegroup can be used to define which cameras a user is allowed to see. Open tab ’Device groups’ to create a device group. On the left side is the list of created device groups. Using the buttons below the list devicegroups can be added, removed or edited. On the right side is the list of cameras.

Click ’+’ below the ’Device group’ list to create a devicegroup. A dialog appears where the name of the device group can be entered. Use a meaningful name, like ’All cameras’. Click ’Ok’ to close the dialog and add the device group to the list. Drag and drop the cameras from the cameralist on the right to one of the device groups on the left.

Assigning privileges:

If all users, layouts, multilayouts, servers and devicegroups are created, they can be drag and dropped to the corresponding usergroup. To remove a privileges select the it in the usergroup and Click ’-’ below the grouplist or press the ‘Delete’ button on your keyboard.

As an example, the steps to create a usergroup called Operators should look like this:

5.4.2 Configure Autologin

Sense Client can be configured to launch automatically on Windows startup after windows login and to automatically sign in to a Sense Server. Click on the gear wheel in the lower left corner of the dialog to open the settings.

On the left side of the screen the default server, username and password can be entered. On the right side the program language, videowall mode and the automatic startup/sign-in option can be selected. In normal operation the videowall mode does not need to be selected and is beyond the scope of this guide.

Chapter 6 – Operation

Click following link to see the video manual: https://support.tkhsecurity.com/downloads/manuals/

Live mode or ’Home’ is accessed by clicking on the ’Eye’ icon on the upper left corner of the screen of the first monitor. This icon is also used to open the menu where Layouts can be selected. See below for a screenshot of a multi-monitor setup. The left monitor shows a layout with live cameras and the right monitor shows a layout for playback. These are the layouts which are created in ’Setup’ mode.

6.1 Live Menu

The Live menu is accessed by clicking on the ’Eye’ icon on the upper left corner of the screen of the first monitor.

It contains the following items:

Multi Layouts: Contains all multi-layouts available for the currently logged in user. Selecting a multilayout will update all monitors which are configured in this multi-layout.

Layouts: Contains all layouts available for the currently logged in user. Selecting a layout will update the currently selected monitor with this layout.

Cameras: Contains all cameras available for the currently logged in user sub-grouped by location names. The subgroup ’All locations’ contains all cameras. Selecting a camera will update the currently selected videopanel in the layout.

Camera Sequences: Contains camera sequences for the currently logged in user.

.

6.2 Tools Menu

The tools menu is accessed by clicking on the ’Toolbox’ icon on the upper left corner of the screen of the first monitor.

It contains the following items:

Search, provides functions to search for events and meta data.

Face Match, eventlist for use with FaceR algorithms.

Database, maintains person list for use with CarR and FaceR algorithms. FaceR and CarR are available if included in the license.

System Alerts: Opens the System Alerts dialog

Video Tags: Opens the Video Tag dialog

6.3 Live

This layout contains 4 live panels where each panel has the following features:

6.3.1 PTZ controls

The live control panel is needed to control PTZ domes. This panel can be pre-configured in a layout, but it will also automatically appear after double-clicking on a videopanel with a PTZ device; the camera will be displayed in fullscreen mode including the dome controls. PTZ commands are sent to the camera which is currently selected (which has a green border).

To pan and tilt a ptz camera hold the left mouse button and move the cursor over the orange dial. The speed of the dome is determined by the cursor-distance from the center of the dial; close to the center the speed is low, on the outside the speed is high. The buttons have the following functions:

	Focus near.
	Focus far.
	Switch auto focus/auto iris on.
	Zoom in.
	Zoom out.
	Open iris.
	Close iris.
	Go to preset ‘Home’.
	Go to preset 1.
	Rotate 180 degrees.
	Save the current position of the dome as a preset.
	Go to the selected preset in the list.
	Opens the preset dialog to give each preset a name.

6.4 Playback

Below is an example of a playback layout that has been created for an operator.

This layout contains 4 playback panels and playback controls where each panel has the following features:

6.4.1 Playback control options

For creating a playback layout, it is needed to create a layout that contains one or multiple panels of the type ‘Playback’ and a control panel to start/stop the playback. There are two types of playback controls available. By default when creating a playback layout or when switching to fullscreen playback, the timeline panel is used.

Option 1: Timeline panel (Preferred)

The red line indicates what the current time/date is of the playbacked recording and thumbnails of the recordings are visible. Also motion detection (if enabled for this camera) is shown in yellow.

	Playback backwards. For streaming codec video only I-Frames are played back.
	Stop playback.
	Playback forward.
	Opens the export image dialog, explained in section 6.3.3 on exporting images.
	Quick option to go to a specific date
	Motion detection
	Option to visualize motion detection, vca events or audio on the timeline panel

Option 2: Alternatively, there is the playback controls panel as a legacy option with the more classic control buttons and slider.

The Playback controls panel is needed to playback recorded video. It has two trackbars where the top bar has a resolution in days and the lower trackbar has a resolution of 24 hours (of the selected day). The playback speed is set by the ’red-green’ trackbar; red is backwards, green is forwards. The date and time on the left and right side of the trackbars correspond to the first and last recorded video image of the cameras which are visible in the layout. From left to right the function of the buttons are as follows:

	Go to the beginning of the recordings of the cameras visible in the layout.
	One minute backwards
	One frame backwards.
	Playback backwards. For streaming codec video only I-Frames are played back.
	Stop playback.
	Playback forward.
	One frame forwards.
	One minute forwards.
	Go to the end of the recordings of the cameras visible in the layout.
	Opens the date time search panel.
	Set export range, explained in section 6.3.2 on exporting video.
	Enable audio playback and set playback speed to realtime (panel should be selected to hear the audio).
	Opens the export image dialog, explained in section 6.3.3 on exporting images.
	Opens the export video dialog, explained in section 6.3.2 on exporting images.

6.4.2 Export Video

Recorded video (and audio) can be exported to different media: CD/DVD, hard drive, USB stick or network share. A single export can hold video of multiple devices from multiple servers in the same time range. The video itself is exported in Sense format, it is not transcoded to a generic codec. The export comes with a program called ’Sense Player’ which is used to playback exported video. To open the ’Export Video’ dialog press the export video button in ’Playback Controls’.

Other options are using the playback controls trackbar or using the start/endtime edit box in the video export dialog:

Timerange using trackbar:
Click ’E’ in the playback controls panel, three buttons appear: ’Start’, ’Clear’ and ’Stop’. Set the thumb-tracker to the starting point of the video that needs to be exported and click ’Start’. Set the thumb tracker to the end point of the video that needs to be exported and press ’Stop’. The time range is highlighted in green. To clear the selection and start over click ’Clear’. After defining the range open the video export dialog. The camera(panel) which has focus will automatically be added to the list of export cameras. The begin and end time are also set automatically.

Timerange using dialog:
Video can also be exported manually without using the trackbar to define the time range. When opening the export video dialog it will use the current playback time (position of thumbtracker) and set the start time with current time minus 5 minutes and end time to current time plus 5 minutes. The camera(panel) which has focus will automatically be added to the list of export cameras.

6.4.3 Export Image

Single images or snapshots can be exported from recorded video to a PDF document which can be stored to any windows storage location (like a USB stick). The PDF report contains information about the exported image and comments which can be entered in the Export Image dialog. To create a report select the playback panel with the image that should be exported and click the ’Disk’ button in the ’Playback Controls’ (see section 6.3.1 on playback controls), it will open the dialog as shown below:

The Optiview VMS supports IP/Megapixel cameras, Analog, HD-over-Coax and IP/Network recorders. Another aspect of this powerful system is the fact that the 64-channel preview screens can be opened in up to 4 windows for live viewing up to 256 channels at the same time.

While all cameras will record on their local recorders, the VMS allows for up to 16 channels to record locally on the home or work PC. 36 channels can be chosen for playback in increments of 24 hour periods.

.

SOFTWARE DOWNLOADS

Right-click and select “Save Link As”

OTHER DOWNLOADS

VMX SERIES SUPPORT

Downloads / Files / Support

Welcome to the comprehensive support page for the Optiview VMX video monitoring platform. This platform, offering both VMX and VMX+ versions, is a potent, integrated solution for single and multi-site surveillance and access control systems. Whether you’re a first-time user or seasoned expert, we’re committed to ensuring that your experience with the Optiview VMX platform is seamless. This page is your hub for downloading all the necessary software and related materials for the Optiview VMX system. As always, if you need more in depth support, call our US based text support line at 904.855.1121.

.

OPTIVIEW VMX

INTEGRATED MULTI-SITE MANAGEMENT SYSTEM

for Single and Multi-Site Surveillance and Access Control Systems

OVERVIEW

The Optiview VMX and VMX+ remote viewing platforms are both powerful, all-in-one professional, project level video surveillance management software. The Optiview VMX Client can be downloaded for free, and will support up to 64 network cameras and intercoms, and supports 1 user account. View up to 512 cameras and 256 Video Intercom devices, integrate multiple access control units, and access advanced analytics by upgrading to the Optiview VMX+.

The Optiview VMX/+ provides user rights management, device management, alarm management, video wall output, and two-way audio. In addition to these VMS features, Optiview VMX/+ offers advanced features, including support for real-time face recognition and robust event management controls.

FEATURES

SOFTWARE DOWNLOADS

OTHER DOWNLOADS

To view the product pages for Optiview VMX Free and VMX Plus click the link below:

Optiview VMX Free

Optiview VMX+

COMPATIBILITY

Optiview VMX is compatible with all Optiview IP-enabled devices: network cameras, NVRs, DVRs, video intercom devices, and access control devices. The server is also compatible with the ONVIF protocol, so it can connect to ONVIF-enabled third-party devices, such as some of Optiview’s third party manufacturers. Call your account managers to talk about our compatability matching.

PLAYBACK

The Optiview VMX platform allows for quick and easy playback of surveillance footage from both the Live footage interface, and the Playback interface. Users can search by time, date, or event type. Users can also zoom in on the timeline, and drag through the timeline with video scrubbing. Download multiple video files at a time, take single frame snapshots, or a ‘burst’ of snapshots.

SMART SEARCH

Search through your surveillance footage quickly and efficiently by using Smart Search, and targeting the area of the screen where motion would have occurred.

INSTANT PLAYBACK

Thought you saw something? Click “Instant Playback” for an immediate jump back in time to 30 seconds in the past to re-review your surveillance footage.

MULTI-MONITOR SUPPORT

Take advantage of complete multi-monitors support.

ADVANCED REPORTING

The Optiview VMX supports heat map, people counting, ANPR license plate capture, attendance and access control reporting.

FLEXIBLE & SCALABLE

Optiview VMX+ supports up to 512 video channels, which includes up to thirty two (32) face recognition cameras. Easily add multiple recorders, cameras, and access control devices from a single-site or from multiple locations around the world.

FISHEYE CAMERA SUPPORT

The software features full support for Optiview Fisheye cameras. The software supports options for the Fisheye camera installation and supports dewarping Optiview’s 360° panoramic fisheye cameras in both live view, and in playback. Because dewarp happens at the software level, the video is always recorded in full fisheye, even if the live view is being dewarped. This allows viewers to see the entire video, and dewarp sections of the video at any given time.

Fisheye

Fisheye Dewarp X4

Fisheye Dewarp X8

REAL-TIME FACE RECOGNITION

The Optiview VMX/+ performs real-time facial recognition on up to two (2) / thirty two (32) channels simultaneously. The software captures and analyzes facial features to determine gender, age, expression, glasses, mustache, and mask, and then can record the faces and store the associated structured data. The server also filters incoming video to display faces that match target features. Facial recognition requires a camera that supports this feature.

ACCESS CONTROL & VIDEO INTERCOM

Optiview VMX offers full support and integration for access control and video intercom products to support a complete security and surveillance system. The server monitors door status and events, manages access rights, and support advanced rules management. In addition to access controls, the server supports two-way communication between intercom and control center.

MANAGEMENT OPERATIONS

The software manages the devices and the user accounts for an entire organization. Operators can assign different camera ranges, active use periods, and business roles for each user. The server also supports different schemes for various events, including IVS, to record and view all event history information.

VISITORS

Quickly register and customize access for visitors.

LPR

Capture license plates in a searchable database.

EMAP

Easily select cameras to view on map.

USERS

Create up to 100 Users per VMX Server.

EVENTS

Track entrance / exit, alarms, access, and more.

.

FREQUENTLY ASKED QUESTIONS

WHAT ARE THE MAJOR DIFFERENCES BETWEEN THE VMS AND THE VMX?

The Optiview VMS and the Optiview VMX are both multi-site remote monitoring software that can be used to view cameras and devices from a centralized location. The VMS is ideal for residential and commercial use, where basic camera surveillance is the primary need. The VMX, however, has an advanced access control module, and can support advanced surveillance such as facial recognition, traffic density, ANPR license plate database capture, and more. See which software is right for you here!

WHY DO I HAVE TO START USING THE VMX?

The free Optiview Video Management Software (VMS) is our legacy remote viewing software, and will no longer be supported going forward. Instead, download our all new Optiview VMX, our powerful new remote viewing software; The user is able to choose between a free VMX, and a more advanced VMX+ with additional features. The new VMX and VMX+ provide a more stable management and viewing platform for CCTV and Access Control, as well as providing many new features. Not sure which solution is right for you? Contact an Optiview Account Manager or compare the Optiview VMX and VMX+ here.

Features Gained:

Optiview’s VMX will support Optiview legacy equipment as well as the latest in megapixel, analytic, and edge recording technology.

WHAT IS THE DIFFERENCE BETWEEN THE FREE VMX AND PAID VMX+ VERSION?

The free version of the Optiview VMX supports 64 video channels, 2 ANPR channels, 2 facial recognition channels, 64 access control channels, 2 POS channels, 4 attendance devices, 2 alarms, and supports only 1 online user at a time.

The paid version allows the user up to a maximum of 512 video channels, 200 access control devices, 1024 doors, 32 video intercom devices, 32 facial recognition cameras, 100 alarms, 32 license plate capture cameras, and supports up to 100 online users.

See which software is right for you here!

WHEN WILL THE VMS STOP BEING SUPPORTED AND AVAILABLE?

The Optiview VMS 2018 will continue to be available to download for a limited amount of time, but will no longer be supported going forward.

WHAT IS THE MAXIMUM NUMBER OF DEVICES THAT CAN BE PUT ON THE FREE VMX OR THE PAID VMX+?

The free version of the Optiview VMX will suport up to 64 cameras. If the user wants to view more than 64 cameras, they will have to purchase the Base License, and then an additional license for each channel, up to 512. See which software is right for you here!

HOW DO I UPGRADE FROM THE VMS TO THE VMX?

The VMX software is completely different from the Optiview VMS and a user can use both. The VMX Server and Client software can be downloaded here.

WHAT IS THE DIFFERENCE BETWEEN THE VMX SERVER AND THE VMX CLIENT?

The server runs all the services and acts as a connection point for several clients that will handle the management of configurations, devices and integrations of one or more IP devices supported by the Optiview VMX software.

IF I HAVE THE SERVER DOWNLOADED, HOW DO I DOWNLOAD THE CLIENT?

The client can be downloaded using the link from the server user interface labeled as “Download Client”. I also made a link for the Client software within our technical support page which Georgia can use, to make a download link within the product resource page.

CAN I DESIGNATE THE NUMBER OF CAMERA CHANNELS BEING SEEN BY THE VMX PER DVR OR NVR?

Yes. The number of cameras “actually” in use by a device (for example a 32-ch NVR) can be designated within the VMX so that it can only sees the actual number of channels. For example, If a user is using multiple 32 channel recorders but not all channels, the VMX can be set to not count every single channel and maximize the usage.

CAN I DESIGNATE THE NUMBER OF ACCESS CONTROL DOORS BEING SEEN BY THE VMX?

No. Whatever the maximum number of doors that an access control panel can handle is, that is what the VMX will see. For example, a CAS-4MC (4 door master control panel) is expandable up to 64 doors, so this will max out the VMX. No additional master control panels can be added unless the user upgrades to the paid version of the Optiview VMX.

CAN I SEE THE HUMAN TEMPERATURE DETECTION & NOTIFICATION SOLUTION ON THE VMX?

The human temperature text overlay can be seen at LIVE mode and Playback mode at the VMX.

HOW MANY USERS CAN ACCESS THE VMX AT ONE TIME?

For the FREE version, only 1 user can access the VMX at any given time, regardless of how many clients are downloaded. With the paid version, up to 100 active users are able to access the VMX Server at any given time via multiple clients. See which software is right for you here!

.

Here are some of the benefits of using wireless IP cameras:

However, there are also some drawbacks to consider:

.

Deep Dive into Wireless IP Cameras: Advantages and Considerations

Wireless IP cameras offer a compelling solution for home and business security, providing the benefits of traditional IP cameras with greater installation flexibility. Let’s delve deeper into the advantages and considerations when choosing a wireless IP camera system.

Advantages:

Considerations:

By understanding these advantages and considerations, you can make an informed decision when selecting a wireless IP camera system that perfectly caters to your specific security needs.

.

Add device

Video：

Hiseeu Wireless PTZ Camera Guide v1

Read Also : The Ultimate IP Camera Guide v3

1, It makes a beep after reset the camera, open the App, click “+ Add camera” –scan QR-code on the camera.

2, Click “Device light is blinking”—Next, then connect your home wifi.

3, Select your home wifi (the camera only support 2.4Ghz wifi, not support 5Ghz), click “next”.

Note: The wifi name and password don’t including special character and the wifi password don’t over 12 character.

You will get a QR code on your mobile phone, aim the QR code of the mobile phone at the camera lens at a distance of 4-5FT.

when you hear the prompt voice, click the blue button below, wait for device to connecting successfully, then edit the device name.

Add device with network cable

1.Please using the network cable connect camera to your router, then click “other ways to add”—More ways to add–select “LAN scan”.

2.It will search device automatically, when find device, click Add. You don’t need to input any password, just click “Confirm” on upper right corner.

3.After add successfully, please click setting icon–click Advanced settings.

4.Connect new WiFi–select your home WIFI and input password–Confirm. Then unplug network cable.

Add Device Via Camera Hotspot

1, Please click “Add camera”—other ways to add—Connecting camera hotspot to add.

2, Check “Device light is blinking” and click Next, then connect your home wifi, and click Next again.

3, Click “Go to settings” to connect camera hotspot, find hotspot IPC*********, input password”11111111”.

It doesn’t matter if it showing not network, just click ok, then go back to app.

4, Finally, wait for device to connecting successfully, then edit the device name.

The camera often offline

1, Check whether the camera antenna is vertically upward.

2, please confirm the distance between the camera to your router, it better within 30FT, if the distance too far, the camera will offline.

3, If still offline, please give your camera version, we will give you a firmware to upgrade camera, it can enhances the camera’s signal.

Camera can’t connect to wifi

1, please confirm wifi is 2.4G or 5G, the camera only support 2.4G. And wifi password cannot exceed 12 characters.

2, if it is 4G wifi, please place the camera next to the router, then press the reset button for 6 seconds to add device again.

3, or you can connect the camera to your router with network cable, then switch to wirelessly connection.

How to using PTZ function on NVR?

1, please left click your mouse, you will see a smart menu below, click PTZ control.

2, click the arrow direction to move the camera.

Please note, if your camera is digital camera, you can’t zoom in or out in this interface, it only suit for optical zoom camera.

You need to go back to main menu, left click mouse again, click zoom in, then roll you mouse to zoom in.

but when you zoom in, the camera image will blur.

How to share the device to other one?

a, Please go to the app–click “Share” icon–select permission and effective time.

b, after click complete icon, you will get a QR-code.

Please note that another phone must first download the application “esecloud” and then register a new account. One account cannot log in to two mobile phones at the same time.

Unable to hear camera sound

If “x” is displayed on sound option, it is not turned on, you need to turn on first.

If still can’t hear sound, please go to setup interface—recording settings—verify that the “Record Sound Switch” option is enabled.

How to connect the camera to Alexa?

 This is the link about how to connect the camera to Alexa, please refer it.

https://www.amazon.com/vdp/02b7820dd64d4ad6a457fcfd8638e830?ref=dp_vse_ibvc1

.

If Alexa showing “Live view not supported”, please don’t worry, this is Alexa app issue,

Actually it can view camera on Echo Show. Write your article here

How to setup motion tracking

If you add camera to NVR, please go to video detection to check whether your nvr support motion tracking.

Usually, NVR not support motion tracking, you need to add camera to the app Eseecloud, then add to NVR, so that you can setup motion tracking on the app.

1, Into device—click setting icon on upper right corner—go to smart detection alarm—enable motion tracking option.

How to set preset position cruise

1, go to setting interface—ptz control—cruise mode—select preset position cruise.

2, go back to record interface–click Preset–add more than two different positions–go to More–click cruise.

After setting successful, the camera will cruise within the preset position range.

Camera not recording after install SD card

1, Please go to setting interface–Storage setting–local storage space–check the status of the SD card.

2, SD card is in normal status, please check if SD card capacity is full, and then format the SD card.

3, If showing no SD card, please take the SD card out and insert it again. (Please keep the power off before inserting the SD card)

Alexa not skill Eseecloud

1, Please check if you have enable Alexa option on the app, click setting icon, advance settings, Alexa service authorization.

2, you need to login Eseecloud account with phone number or Email address, If you use third-party software to log in to Eseecloud, such as Google, you cannot log in to Eseecloud on Alexa

Please note, If Alexa can not find camera, please check if you have setup a name for camera.

Eseecloud Cloud Service Fee Standard

upgrade the ptz camera to new version.

We have upgrade our ptz camera version, you can scan the QR code to add the device without connecting camera hotspot.

and you can add the camera to nvr directly, don’t need to input password.

1) connect the camera to the same network as your computer with a network cable, then download a tool to search your camera IP, copy firmware to your computer. this is the link of tool.

http://download.dvr163.com/tool/IPCamSuite-1.2.26.8.zip

after you dowaload the tool successfully, please open it and click refresh to find the camera ip. upload the firmware and click upgrade. Write your article here

 please note, when upgrading the camera, please do not unplug the power or reset the camera, otherwise the camera will crash.

if you want to upgrade your camera version, please email johnny@hiseeu.com to get a upgrade firmware.

Fixed-point cruise on NVR

1) Right click the mouse–system setup–channel setup–PTZ setup. select correct channel. Add first cruise point,

2) click add to set first position (the default is 1, which does not need to be changed),

3) then click preset box select 2–add, add multiple cruise points in this way. You also can select “keep time” you want, preferably in five seconds or more.

4) And then click “?” question mark into the PTZ control interface–click PTZ control option to set first position, then click store.

5) change the preset box to 2, adjust the camera lens to second position–store

6) right click anywhere –return to the PTZ setting interface–apply—ok.

After connect to mobile phone, camera showing “wrong password” on NVR.

If you are adding camera to your mobile phone through camera hotspot , it will generate a random password.

1, Go to app Eseecloud, click three points icon on right upper corner, click edit. Fast click 6 times on blank area,

you will see random password.

2, Go to NVR, right click mouse—video manage—manial edit.

3, select channel—input random password, click ok,

If still showing connecting fail, please click match code to match camera.

The camera will turn to the wall or the ground

1. Please confirm whether to manually rotate the camera lens. If so, the camera will not return to its original position after restarting or automatic tracking.

please unplug the power adapter, then plug it in again, click PTZ on the mobile app or NVR to control the camera lens.

2. If you do not turn the camera manually, please tell us your camera ID number and version information, and we will feed back to our technical support.

.

.

1.Download the mobile APP (Guard Viewer) and Sign up

for an Account

Download the mobile APP and Sign up for an Account

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

2.Add Device to APP(Guard Viewer)

Guard Viewer Security System User Guide v1

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

Add Device to APP(Guard Viewer)

Auto add is not suggested. Please tap on “Later” if you see this message box.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on  “ Menu” icon> Tap on “Devices”> “Add” ,

2.  Tap on “Scan”> “OK ” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at  Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4. add NVR by scanning device QR code and click on “save”

5.    Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6.  Select the device and tap on “Start Live View ”

3.Device shows “Offline” (system kit to app)

Device shows “Offline” (system kit to app)

1. If the device shows offline on the mobile phone app, we need to make sure the NVR is connected to the network perfectly or not

2. Go to your monitor that is connected to NVR, and check out the network status first navigate to this path first: “Menu–Network–Basic–P2P”, also check whether the device status is online or not,

3. Also go to “Menu–Network–Advanced”,to disable the “PPPoE”

4. if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply”. After that, go back to “P2P” and check if the device status is online or not

5. if you connect the network cable to the lan port or the lan/wan port of the router

We need to connect it to the lan port of the router,plz take a photo of yours for us to check.

.

If the P2P show connect the network ,but the app also show the offline,please delect the device on your APP and re-add it again.

4.Enable push alerts on APP

Enable push alerts on APP

5.Why I can’t remote view when the network is outside？

Why I can’t remote view when the network is outside？

.

Cause: Customer doesn’t follow the instructions on the user manual and add the device in a local adding way, so we suggest them to delete the device first, and re-add the device again like this FAQ

https://www.hiseeu.com/a/help/article/53969

6.APP Share Device

APP Share Device

One device is linked to one user only. The NVR system can only be controlled by one authorized account, which can share the device with others to prevent attack or hacking.

There are 2 ways to share the device with others. For the admin user, please follow the instructions to share the device:

1.Type in “Menu Icon ” and navigate to “Devices”

2. Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

3.Share the device by typing in the user name you want to share and selecting the function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigating to “Devices”.

4.Share the device by generating a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

7.Add Device on Guard Station PC Client Software

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

8.Guard Station shows “offline”

Guard Station shows “offline”

plz check local NVR is connected to network perfectly or not,If your NVR hasn’t connected to the network yet, it will show “offline” in your PC Client “Guard Station”

Plz go to your NVR that is connected to Monitor,

Check out the network status, first navigate to this path first : “Menu–Network–Basic–P2P” ,and check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” , After that, go back to “P2P” and check if the device status is online or not

9.Not Recording? HDD not working?

Not Recording? HDD not working?

Right-click the mouse from “Menu–Storage–Hard Disk”

If there is no hard drive information or Status shows Abnormal, the hard drive is having an issue

10.AHD5 Modify the Camera model

AHD5 Modify the Camera model

（Please notice that AHD5 cameras only the TVI camera model have the audio function，the AHD5 cameras we sell seperately is the AHD model so it should modify the TVI model to have the audio function)

1. Click the OSD Menu Control , then click the arrows to the Menu t hen click the icon to select the “VIDEO SETTING ”

2.Select the VDEO SETTING and click the arrow to enter.

3.Then Select the “TVI ” on the HD, then click the “APPLY&REBOOT “and then click the “RETURN “and the “EXlT” back to the Version

4.Finally Turn Audio On

11.Forget DVR Password

Forget DVR Password

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2. If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer)

In NVR interface, tap forgot password.

1. Scan the above QR code by APP “ME–General–Forget Device Password” , and the security code will be sent to your email address.

2. If you haven’t set up an email before, or have any difficulties resetting the password, please take a screenshot of this interface(Serial No. please also make the code is as clear as you can ), and email us at love@hiseeu.com , since we need the serial number to produce a new password by using an internal tool

12.One or two cameras are not working

One or two cameras are not wokring

(1) BNC Cable connected to Camera is broken

Step: Use another BNC cable to connect the camera to have a try

(2) The port of the DVR box is broken

Step: After changing the BNC cable, and still there is no camera image, plz insert the camera into another port of the DVR to have a try

(3) Camera is broken after troubleshooting with the steps （1）-（2）

13.Four cameras or above are not working

Four cameras or above are not working

Four cameras or above not working is an abnormal situation. It’s not only a camera issue, which could be related to a power supply or power splitter connected to four cameras

If the power supply or power splitter connected to four cameras is broken, which can’t provide power supply to cameras

Step:

(1）Change to another 12V 2A Power Supply to connect to four cameras to have a try. We wanna make sure if this is related to the power adapter

(2) Change another 1-4 way power splitter to connect four cameras to have a try. We wanna make sure if this is related to the power adapter

( If you do not have another power adapter/splitter, plz use the other power adapter connected to the four normal cameras)

After making sure the power supply or power splitter is doing fine, but still no camera image, which means the DVR box is having issue

4.Eight Cameras are not working

Eight Cameras are not working

Please check your camera connection is correct ， if the connection is correct ，

i t’s mostly possible the DVR box is having issue, and need a new DVR box replacement

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

15.How to record the event only？

How to record the event only ？

Please click the mouse to the Menu then click the “ Storage ” and then click the “ Recording Schedule ”，“ Select Camera ” then click the “ enable Schedule ” click the “ Audio Storage ” then select the color of record type and fill in the corresponding time and date.

.

Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision

The Following network settings must be checked before adding the device to Guarding vision App.

Method 1: From NVR Local menu

Step 1: Right Click on the NVR Monitor and select “Menu”.

Step 2: Select “Configuration” from the Menu options.

Step 3: Select “Network” and check the option “Enable DHCP” Click “Apply”

Step 4: Make sure your NVR/DVR obtained an “IPV4 Address” and “Preferred DNS Server” values automatically. If not, check your network settings and make sure your device is properly connected to your network router or switch.

Step 5: Select “Platform Access” and check “Enable”.  You will be taken to the service terms window.

Step 6: Create a “Verification Code” check the “Guarding Vision service terms” click “OK”.

Step 7: Click “Apply” to apply the settings. The status will change to “Online”. The QR Code being displayed on your device “Platform Access” page can be scanned with Guarding Vision app to add the device into your App. To proceed with adding the device into the app scroll down to “Adding NVR/DVR to Guarding Vision App”.

Method 2: From the NVR/DVR/IP Camera Web page.

Step 1: Input the IP address of the NVR into the address bar and login with the credentials.

Step 2: Go to Configuration  Network  Basic Settings

Adding the NVR/DVR to Guarding Vision App

Method 1: Using the QR Code

Download and install the Guarding vision app on the Mobile. Register and Create a Guarding vision account on the App.

.

.

.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code”. Scan the QR Code displayed on the NVR’s Monitor.
.

.

.

.

.

.

Step 3: Scan the QR code from the device sticker or Login to the device Local Menu and go to Menu  Configuration  Network  Platform Access to access the QR Code.
.

.

.

.

.

.

.

.

Method 2: Add Device with Serial Number
.

(Only the last 9 digits of the serial number are needed to add the device into the App.)
.

Step 1: Tap on the ‘+’ icon and select “Manual Adding”
.

.

.

.

Step 2: The serial number can be accessed from the device sticker. To access the serial number from the web config, go to Configuration  System  System Settings  Basic Information
.

(Refer to the figure below)
.

Step 3: Once the “Manual Adding” Option is selected, You will be directed to the Add device page with “Serial No.” Input the serial number and click on  to save.

.

.

.

Step 4: Click “Add” to add the Device.
.

.

.

.

.

Step 5: Input the Verification Code that was created and click “OK”.
.

(You can find the code from the device web Config. Go to Configuration  Network  Advanced settings  Platform Access.)
.

.

Step 6: Tap on “Next”. Create a Device name in the “Edit Alias” page. Tap “Save”
.

.

.

.

.

.

Step 7: Tap on “Guarding Vision” at the bottom of the app to see your device listed. Tap on the device name to view the cameras connected to the device.
.

.

.

.

.

.

How to Change Camera names on the App
.

• Slide the device name to the left to view the settings and share icons.

• Tap on the  Settings icon.

• Tap on “Linked Camera”

.

• Click on the Edit icon and input a desired name to the camera and Tap “Save” icon.

• 

Guarding vision Setup from browser (www guardingvision com)

.

Step 1: Open browser (Internet explorer/Chrome) and input the address www.guardingvision.com. And click on “Register” to register for a new account.

Step 2: In the registration page, input the mandatory credentials and select “Email” for registering with email or “Country Code” for registering by a phone number.

Step 3: Once the account is created, select “Device Management” and select “Add” to add a new device.

Step 4: In the “Add Device” pop-up window, input the device serial number (Last 9 digits of the serial number found on the device sticker) and click on “Search”.

Step 5: If the platform access is enabled on the device, then you should see the device on the “Add device” window. Click on the ‘+’ icon for the device. Click on the link for Enabling “Platform Access” https://app.box.com/s/ftj2keo6pvvvkpif9ukquyp7jrvhktwx.

Step 6: Enter the verification code found on the platform access page of the device. Click “Add”.

.

Step 7: Click “OK”. Now the device should be added into the Guarding vision account. To view video stream, download the Guarding vision ass on your mobile phone and login with the account credentials just created.

.

.

Sharing the device:

To share the device with another Guarding vision account, click on the “Share” icon next to the device name

Select “Email” for sharing by email or select “Mobile Phone Number” to share by mobile number. Click on the check mark next to the device and click “Share”.

.

Initialize/Setup SD Card from Guarding Vision App

SD Card Setup for IP Camera from Guarding Vision

.

Purpose:

This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.

(Note: When a brand new SD Card is inserted into a IP Camera, it has to be initialized/formatted before it can start recording data)

.

Steps to Initialize/Format the SD card

Step 1: Open the app, Select ‘Guarding Vision’ on the bottom left and slide the device name to the left and select the icon.

Step 2: Once in the device settings page select ‘Storage Status’

.

.

.

.

Step 3: In the storage status page, select ‘Memory Card’, which will take you to the ‘Initialize Storage’ page.

.

.

.

.

Step 4: In the initialize storage page, select Initialize. This will format or initialize the sd card and the sd card should be ready for recording.

.

Reset device with Guarding Vision

Reset NVR using Guarding Vision

Purpose:

The purpose of this document is to be able to reset an NVR with the vuarding vision account.

Currently Supported HINO devices:

NVR532P16-I4

NVR516P16-I4

NVR732-I8

NVR764-I8

Required Firmware:

V4.1.65 or above

Initial setup for enabling Password reset from Guarding Vision

Step 1: During the initial device setup, make sure the “Reserved Email Settings” option is checked.

.

.

.

Step 2: Since the Reserved email settings option is enabled, the following screen as shown in the figure below should appear. Input the email that you wish to receive a password reset verification code.

(Note: Please enter a valid email)

.

.

.

Resetting password from the Guarding Vision App

Step 1: On the NVR login screen, click on “Forgot Password”

Step 2: On the following screen as shown in figure below, select “Verify by Reserved Email” and click “OK”

Step 3: You will be brought to a screen with QR Code.

.

.

Step 4: Open the Guarding vision App on your phone and go to More  Reset Device Password.

.

.

.

Step 5: Scan the QR Code shown on the NVR screen. You should see a message as shown in the figure below.

Step 6: Check your email to find the verification code and enter the code in the field provided and click on “OK”.

.

Platform Access for Guarding Vision Offilne Issue

Guarding Vision Offline Issue

Purpose:

This document provides steps to fix the Platform Access “Offline” status issue on your NVR/DVR.

Solution:

The most common cause for “Offline” status is when the “Preferred DNS Server” space is empty. Follow the steps below to fix this issue.

NVR Local menu

Step 1: On the monitor connected to the NVR, Right click and go to Menu  Configuration  Network  General

Step 2: Enter the “Preferred DNS server” address as 8.8.8.8

(Note: If “Enable DHCP” is checked, you can check the option “Enable DNS DHCP” which will let the NVR/DVR pullup its own Preferred DNS Server)

Step 3: Click “Apply”. The device might take a few seconds before applying the new values.

Step 4: Now go to Menu  Configuration  Network  Platform Access. The status should show “Online”. The device might take up to 60 sec before showing the new status. Click “Back” wait 60 sec and check the status again.

(Note: You can scan the QR code on your “Platform Access” page to add the device directly to your Guarding Vision App.)

.

Guarding Vision Quick Setup

Guarding Vision Setup Instructions

Setting up the DVR/NVR

Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network.

Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If you have “Enable DHCP” and “Enable DNS DHCP” option on this page selected, then you do not have to perform this step)

Step 3: Select “Platform Access” and check “Enable” and create a verification code. Click “Apply”.

.

(Note: The QR code displayed on the platform access page can be used to add the device into the guarding vision app.)

Adding the device on Guarding Vision App.

Step 1: Tap on the “+” to add a new device. Select “Scan QR Code” to scan the QR code being displayed on the NVR monitor. Input the Verification Code that was created under “Platform Access” in the NVR.

.

.

.

.

Step 3: For Manual Adding, input the “Serial No”. For QR code, Scan the QR code from the device sticker or the QR code displayed on the NVR. (Note: You can also scan the QR Code you see on the monitor. Refer to Step 3)

.

Guarding vision sharing and registering

Guarding Vision ‘Register’ ‘Login’ and ‘Share’

Registering on Guarding vision

.

Option 1: Tap on the “register” option. Now in the Register page enter the Mobile Phone number and tap on “Get Security Code”. You will receive a code by “Text”. Input the code you just received and complete the process.

Option 2: Tap on “Register by Email Address” for registering by email. You will receive the security code to the email address entered.

.

How to select Login options on Guarding vision

.

To Login using a mobile number, tap on the “Login by Mobile Phone Number” option. Now input the phone number and password and tap “Login”.

.

.

.

.

Sharing a device on Guarding vision

​

Method 1: Sharing from the Primary account

On the Primary account, swipe the device name to the left to access the “Share” Icon. Tap on the Share icon. This will take you to the “Recipient” page.

In the “Recipient” page enter the email or phone number of the user you want to share the device.

When sharing, make sure the Phone number/email/username are entered as shown in the account details.

Finding Account Details:

On the bottom of the app, Tap on “More” and select “Account Management” to view the Account details like Username, Email address(if used to register) and Mobile Phone Number (If used to register).

.

.

.

Add Stand alone device to Guarding Vision

.

Adding a Stand Alone IP Camera to Guarding Vision App

Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access

Step 2: Check the “Enable Option” you will see a pop-up window asking to create a verification code. Enter the desired verification code and click “OK”

Step 3: You can view the verification code by clicking on the eye lid icon.

Step 4: Click “Save” and refresh the page. The status should turn from offline to online.

.

Step 5: Now you can add the device into guarding vision by entering the las 9 digits of the serial number which can be viewed by going in to

Configuration  System  System Settings.

.

Step 6: Open the guarding vision app on your mobile device and register for a new account.

Step 7: Click on the ‘+’ sign on the top right corner of the app and select manual add for serial number or QR code to scan the QR code on the device sticker

(Note: Playback can be viewed on the App for IP Cameras that support Micro SD Card)

.

Add Device with Static IP into Guarding Vision for Local Access

.

Add IP Camera to Guarding Vision with Static IP Address

Purpose: This document provides instructions on how to find and add a IP camera with static IP address into the Guarding Vision App.

Note:

Method 1: Adding an online device in the local network

Step 1: Open Guarding vision App and select “Guarding Vision” on the bottom of the App. Click on the “+” icon on the top right to access adding menu.

Step 2: From the Add menu, select “Online Device”

.

.

.

.

Step 3: In the online device list, tap the device you want to add. You will be taken to a details page.

Step 4: The details page shows you the info of the device that you just selected.

(Note: Select the “Add Device to Guarding Vision Server” option available under the “Add” button for remote access over cloud. For this, the device should be connected to the network and  the “Platform Access” option should be enabled from the local menu/web menu for NVR/DVR. For a IP Camera, the “Platform Access” should be enabled from the web menu.)

.

.

.

.

Step 4: in the “Add Device” page, input the Username and Password for the device and click  on  icon on the top right corner to save the login credentials and finish adding the device.

The device should be added to your App.

.

.

.

.

.

Method 2: Manual Adding option

(Note: Using this method, you can add a portforwarded device with a public IP address.)

Step1: Open the App and click on the “+” icon on the top right to access the add menu. Select “Manual Adding”.

Step 2: Select “IP/Domain” to change the adding type.

.

Step 3: Create a name for the device by typing in the “Alias” option.

• Input the “IP address” of the device and the login Credentials. Tap on  icon on the top right to save the values entered.

(Note: If you have a device with a port forwarded IP address, you can enter that public IP address in the address space with the device login credentials.)

.

.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option (  ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu (  )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu (  ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note:  Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu.  Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file.  Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed.  Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the  icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings  icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the  icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings (  )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the  option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon (  ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon (  ) for the device. Select Video Channel  and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit (  ) icon and name the tour. Click the checkmark (  ) when finished.

Note: Click the Go icon (  ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the  icon and select the Edit (  )icon.

Step 4: Enter a name for the tour and click the add (  ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play (  ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop (  ) icon in the Tour (  )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon (  )

.

Features:

(Supported features depend on camera features)

For more information download the Alibi Cloud VS Mobile App User Guide.

iOS App

• 

.

Android App

• 

.

.

Alibi Cloud VS

Direct Camera to Cloud Video Surveillance

Our cutting edge cloud-based VSaaS offering has gained significant traction with dealers and end-users and is poised for significant growth in 2023 and beyond. If you are not selling cloud-based video surveillance then you are missing out on opportunities to recession-proof your business. We’ll be hosting demo sessions to show you how simple it is to install/setup and how it saves you time and money by avoiding truck rolls with an easy to use interface that helps you solve most issues remotely. And it is super easy for your customer to use as well, making it incredibly appealing for home and business installs.
Learn how this powerful solution is gaining traction in cannabis, medical, retail/restaurant and education applications.

.

Brivo Cloud Access Control

Brivo + Alibi Security: Better Together

Brivo and Alibi Security bring you the best of both worlds… Unlimited access to Brivo’s world-class solutions and support, plus Alibi’s dedicated sales support & innovative marketing platform. The Brivo Accelerate Program is designed to help accelerate growth of YOUR access control business!

.

Alibi Arsenal

Our FREE Marketing Engine, Ready to Power
Your Business

Marketing is not easy. Alibi Arsenal business growth tools and resources make it easier. This FREE platform can help you generate leads with brandable sales/marketing flyers, get found online with improved Google My Business setup and to turn your current customer base into advocates through a powerful reviews engine. Plus, we give you access to tools that make it easier to tap into your current customer base to generate incremental business by cross-selling products and services.
Come by for a LIVE demo of this platform and to learn how you access these powerful tools.

.

Expect More from
Your Security Provider

.

Alibi Security is a trusted provider of security technology, cloud solutions, and growth enablement services—serving thousands of security professionals for more than 35 years. We are committed to quality, continuous innovation, and the investment in the PEOPLE, SOLUTIONS, and SUPPORT required to help our Dealer Partners succeed.

.

.

Enterprise Performance
– Without Breaking the Bank

Alibi Cloud VS makes enterprise-level cloud surveillance accessible for virtually any-sized application or budget. Featuring an ultra-secure camera-to-cloud architecture, Alibi Cloud VS dramatically reduces your up-front hardware investment and maintenance requirements, saving you valuable time and money. Ideal for both business and residential applications, Alibi Cloud VS is remarkably scalable – and can easily support larger camera counts and multi-site projects.

Centralized
Management

View cameras from single or multiple locations via a single dashboard, simplifying management and streamlining review of your video evidence.

Eliminate Common
Failure Points

Stream directly from camera to the cloud, ensuring you never lose video footage due to a faulty recorder or failed hard drive.

Enhanced
Security

No port forwarding necessary. SSL/TSL handshakes are used to make the connection from camera to cloud, ensuring encrypted transmission up and down. Video is stored in ultra-secure Tier 4 data centers, featuring triple-redundancy and fault-tolerant infrastructure to ensure your evidence is always safe.

Lower Total Cost of
Ownership (TCO)

No recording equipment, minimal maintenance requirements, and on-demand scalability – so you only pay for what you need, when you need it.

.

.

Before referring to this Mobile Application User Guide you must first download and install the mobile application on your mobile device (smartphone or tablet). You can find links to the mobile application(s) on www.alibisecurity.com at the following location:

.

SUPPORT Menu > DOWNLOADS > ALIBI CLOUD VS MOBILE APP

.

Choose the link that applies to your mobile device (iOS or Android), download and install the application. Now you are ready to install and activate cameras.

.

Adding a Camera via the Mobile Application

.

The first time you login to the mobile app, you will be required to enter your username (email address) and the password. The screen will show no cameras attached to your account. You will tap the ADD A CAMERA button on the screen and it will prompt you with a second screen to select the type of camera you want to install. Tap on the ADD A CLOUD CAM section. The next screen gives you specific instructions for attaching your cloud-enabled camera to the network.

.

IMPORTANT: All POE and WiFi cameras must be hard-wired into the local network in order to be discovered by the Alibi Cloud VS solution.

.

Once you have connected the cameras you want to add to your Alibi Cloud VS account to the local area network (LAN) you can tap the CONTINUE button.

.

.

..

.

The next screen displays your local network and the cameras that are available to be added to your Alibi Cloud VS account. Tap on the camera you want to add from the list and you will be prompted to name your camera. Type in a name and choose CONTINUE. The system will ping your camera, check credentials and firmware and connect. You should receive a confirmation screen that the camera has been added then tap CONTINUE.

.

.

.

..

.

To get your WiFi camera to the wireless network you need to connect the WiFi camera to the wireless network. Tap the zone that the WiFi camera is in. This takes you into the camera selector menu. Select the WiFi camera you want to attach and it will open the camera settings menu. On the main screen, under NETWORK

SETTINGS, it will say “Not Connected”. Select this menu option and it will take you into the wireless connection menu, displaying the available wireless networks to connect to.

.

.

.

.

Tap the wireless network you want to attach the camera to. A login screen will open up asking you to enter the password for the wireless network. Enter the password and tap CONNECT. The system will them connect the camera to the wireless network and you will receive a confirmation screen once completed.

.

IMPORTANT: You must keep the WiFi camera hard-wired into the network until you login to the wireless network. Once you get the camera connected to the wireless network you can disconnect the network cable and move the camera anywhere that it has good signal strength to connect to the wireless network.

.

.

.

.

.

.

From the main dashboard screen you have two different ways you can add additional cameras to the system. If you want to add another camera to the same zone you already have setup, simply choose the zone on the main dashboard screen, it will pull up the camera viewing screen and you will tap the Gear icon at the bottom. It will open a screen that shows the current camera(s) assigned to the zone and the ADD A NEW CAMERA button.

Tap this and follow the instructions to add a new camera.

.

.

The second option for adding cameras is to setup a new zone and add the camera to that new zone. From the main dashboard screen tap the + icon in the top left corner of the screen. This opens a new screen that lets you setup a new zone. Click ADD CAMERA and then follow the instructions for adding a new camera explained previously in the User Guide.

.

.

From this menu you can also move cameras currently signed to other zones to the new zone. Simply click SELECT CAMERAS FROM OTHER ZONES. A menu will be displayed showing cameras already attached to other zones. Click the camera and move it to the new zone.

.

After adding the camera you will be taken to the main camera dashboard screen. From this view you can see all of the zones cameras have been assigned to. Select the zone you want to view. An individual thumbnail view of the camera(s) will be displayed. Tap on the gear icon at the bottom of the screen and it will take you into the settings selection menu. Choose the arrow to the right of the camera that you want to adjust settings for and you will be taken to the settings menu for that specific camera.

.

.

.

.

.

.

.

.

.

.

.

PoE Camera Setting Menu

.

.

.

.

.

.

.

WiFi Camera Setting Menu

.

In the settings menu for each camera you are able to control the following settings:

.

.

Account Settings and TouchID/FaceID Login

.

After you login and add a camera to your system you can select the home button at the bottom left of the screen and it will take you to your main dashboard. Select the person icon in the upper right and this will take you into account settings. From here you can enable remote support access, enable/disable push notifications and enable TouchID/FaceID login for easy access when starting the app.

To view live video from your cameras connected to Alibi Cloud VS, go to the main dashboard screen and select a zone to view. Once in the zone, you will see the individual cameras with ‘play arrows’ located in the middle of the thumbnail screen. Simply click on one of the ‘play arrows’ in the thumbnail and live viewing will begin. You will see the word “LIVE” appear at the top of the thumbnail viewing screen. Want to enlarge the viewing area? You can simply turn your smartphone/mobile device to landscape to view in full screen mode.

.

Viewing recorded video (footage) is also very simple. You will need to choose the zone that includes the camera you want to review recorded video from. This will display thumbnail views of all cameras associated with this zone. If you have multiple cameras in a zone, you will see multiple thumbnails. To view recorded footage for

a specific camera tap the clock/rewind icon ( ) at the bottom of that camera thumbnail view. This will take you into the footage screen where you can review a timeline, with detection events noted. You can scroll through the timeline by scrolling with your finger, either up or down, to view events that happened earlier or later in the day.

.

.

There are settings and features on the playback screen that make it easier for you to review video quickly. You can select the ZOOM IN button and the timeline will appear in smaller increments, allowing you to find events more accurately. You tap the MORE menu and adjust playback up to 10x faster than normal.

The SUMMARY button at the bottom of the page lets you create and download a video summary of detection events for the last 24 hours. Simply click the button and the app pulls detection events into a single summary video. Creating a summary takes a few minutes and once completed you have the option to save the 24 hour summary to your mobile device or share it with someone else.

.

If you have forgotten your password or simply want to reset it, you can easily do this by selecting the person icon in the main dashboard screen. Click ‘Logout’ and on the next screen tap ‘Log In’ and it will take you to the main login page. Tap ‘Forgot Your Password?’ and a screen will appear for you to enter your email address. By entering your email address and clicking ‘Send’ you will receive a secure link in your email to reset your password for your Alibi Cloud VS account. This new password will be valid in desktop and mobile apps.

.

.

Why Do We Need Solar Security Cameras?

How Do Solar Security Cameras Work?

Features to Consider When Purchasing a Solar Security Camera

Installation Tips for Solar Security Cameras

Top Recommended Solar Security Cameras

Frequently Asked Questions

Why Do We Need Solar Security Cameras?

An increasing number of people are using smart cameras at home to protect their property or to look after the elderly and children. In fact, security cameras can effectively reduce the probability of burglaries and other crimes. Unlike indoor cameras with convenient installation environments, outdoor cameras often cannot find a suitable power supply or installation location. To meet this need, various outdoor cameras have emerged, especially in recent years, with battery-powered, wire-free cameras becoming increasingly popular. They can be easily installed at any location you desire.

However, battery-powered security cameras have their own limitations. Even with high-capacity battery options available, you still need to recharge them every 1-6 months. Outdoor cameras are usually installed on high walls, poles, or trees, and you often need a ladder to take down the camera for charging, which is undoubtedly a hassle. Solar security cameras can solve this problem by providing a continuous and clean energy source for the cameras, reducing maintenance efforts, being more environmentally friendly, and reducing electricity costs.

How Do Solar Security Cameras Work?

Solar security cameras convert solar energy into electrical energy through solar panels. This energy is stored in the camera’s batteries, keeping them continuously charged. The stored energy ensures the camera’s uninterrupted operation even during periods of limited sunlight, such as winter or rainy days.

Features to Consider When Purchasing a Solar Security Camera

Regarding Solar Panels:

(1) Flexibility:

The market offers various forms of solar panels. Integrated solar panels have a sleeker design but may limit the panel’s exposure to sunlight. Detached solar panels, connected by cables extending several meters, provide the flexibility to position the panels in a sun-rich location and adjust the angle for direct sunlight exposure.

(2) Material Quality:

Different solar panel materials have different photoelectric conversion efficiencies. Currently, common materials on the market include monocrystalline silicon, polycrystalline silicon, and amorphous silicon solar cells, with the more expensive monocrystalline silicon having the highest efficiency, up to 25%.

(3) Maximum Output Power:

The power output of a solar panel is critical for ensuring adequate energy supply. It is calculated under Standard Test Conditions (STC): a temperature of 25°C, solar irradiance of 1000W/m², and an Air Mass of 1.5. The maximum power output formula is the Panel’s Area (cm length × cm width) × 0.1 × Efficiency.

In practice, factors such as the duration of sunlight exposure, panel angle, environmental temperature, and air quality can affect the panel’s power generation.

Regarding Cameras:

When focusing on the camera itself, the features we need to concentrate on are no different from ordinary security cameras, such as resolution, night vision capability, AI detection abilities, and the camera’s field of view.

(1) Resolution:

The higher the camera’s resolution, the clearer the details you can see. However, it should be noted that an increase in resolution will also lead to more power consumption.

(2) Night Vision Capability:

Nighttime is the peak period for various incidents. Night vision capability is definitely an important value point to measure the usability of a security camera, whether it has color night vision ability, whether the picture has fewer noise points, and whether moving people and animals can be accurately and clearly captured at night. To learn how to choose a security camera with better night vision, you can read our other article: Best Night Vision Home Security Cameras – Things You Need to Know.

(3) AI Detection Capability:

With the development of AI technology, image recognition algorithms have become more refined. Many security cameras now have the ability to recognize people or other objects, such as humans, animals, and vehicles. They can detect different objects and bring you timely reminders, increasing security performance while reducing false alarms and missed reports.

Installation Tips for Solar Security Cameras

To maximize the efficiency of your solar security camera system, consider the following installation tips:

Optimal Panel Positioning:

Install the solar panel in a location that receives maximum sunlight throughout the year. Position it facing south in the Northern Hemisphere or north in the Southern Hemisphere. Adjust the tilt angle between the panel and the ground to optimize sunlight absorption.

Avoid Obstructions:

Ensure that the solar panel is free from any obstructions like trees or buildings that may cast shadows and reduce its efficiency. Also, keep it away from open flames or flammable materials.

Temperature Considerations:

Temperature affects solar panel efficiency. Ensure sufficient space between the roof and the panel to allow airflow and prevent overheating.

Regular Cleaning:

While solar panels require minimal maintenance, occasional cleaning is essential to remove dirt and debris that may reduce their effectiveness. In some cases, rainwater may naturally clean the panels, but periodic cleaning may still be necessary.

Top Recommended Solar Security Cameras by Tapo

Tapo offers an array of solar security cameras that cater to various needs. When selecting a solar security camera, consider the following:

Tapo Solar Panel Accessories:

Tapo A200 features a larger solar panel area and utilizes high-efficiency monocrystalline silicon cells. With up to 4.5W of power, just 30 minutes of standard sunlight daily can keep your Tapo battery camera operational around the clock.

Tapo Solar Security Camera Systems:

The Tapo C410 KIT combines the convenience of a Tapo A201 solar panel with the advanced features of the Tapo C410 camera. With 2K resolution and full-color night vision, this camera provides crisp and clear footage day and night. Equipped with AI detection capabilities, it offers accurate real-time notifications, enhancing security while reducing false alarms.

For those seeking higher quality, the Tapo C425 delivers exceptional performance. With upgraded 2K QHD resolution and a built-in Starlight Sensor, it captures vivid details even in low-light conditions. The camera boasts a large 10,000mAh battery, providing up to 300 days of extended battery life. This camera ensures reliable and long-lasting security protection even in regions or seasons with limited sunlight.

.

Tapo Wire-Free MagCam Bundle

.

Solar-Powered Security Camera Kit

Tapo C410 KIT

.

Solar Panel

Tapo A200

.

Frequently Asked Questions

To address common queries, here are answers to some frequently asked questions about solar security cameras:

Can solar security cameras work during winter?

Solar security cameras can function in winter. Although the daylight hours are shorter and the generated electrical energy is reduced, the energy stored in the battery is sufficient to maintain the camera’s normal operation.

Can solar security cameras work at night?

Solar security cameras are designed to operate at night. The energy stored in the battery during daylight hours powers the camera, enabling it to function seamlessly during nighttime.

Do solar panels work in the rain?

Solar panels continue to generate electricity during rain or cloudy conditions, although the amount of electricity produced may be lower.  Solar panels are designed to be waterproof, so there is no need to worry about water damage. Additionally, heavy rain can help clean the panels by washing away accumulated dust and pollen.

Do I need a solar panel for each camera?

The number of cameras that can be connected to a single solar panel depends on the power requirements, panel capacity, and charging system efficiency. Tapo solar panels have a single USB connector to charge one camera at a time.

How long does a solar panel take to charge a security camera?

Under optimal weather conditions with sufficient sunlight, and assuming the working temperature and humidity standard is met, usually about 30 minutes to an hour of direct sunlight per day can keep a Tapo Battery Camera running continuously (up to 100 events triggered per day).

How long do solar security cameras last?

The need to charge batteries is rare if you live in an area suitable for solar power generation and keep the solar panels clean and at the right angle.

Solar security camera batteries can last about one to six months on a full charge, even during weeks of cloudy skies. If the battery level is nearing 25% and there’s little sunshine predicted, consider bringing the camera or battery inside to charge.

Adjusting settings like motion detection, video resolution, frame rate, recording length, and turning off unnecessary lights can help prolong battery life.

At what temperature do cameras stop working?

The Tapo Solar Panel is rated for temperatures between -20℃ and 45℃. The optimal temperature range for battery charging is 0℃ to 45℃. Nevertheless, frost and ice can form on the lens when temperatures fall below freezing, obstructing the camera’s view. Snowfall can also impede the camera’s ability to record footage.

Can solar panels work without a battery?

Solar panels are devices that convert light into electrical energy but cannot store it. They generate higher voltage in strong light and lower voltage in weak light, resulting in unstable output that cannot reliably power devices. Voltage converters are used to stabilize the solar panel’s output to charge a battery. Devices then draw a stable supply of power from the battery.

Solar security cameras provide a perfect balance of security, efficiency, and sustainability. With careful selection and proper installation, these devices can offer a reliable security solution for those looking to protect their property with the added benefit of reducing their carbon footprint.

.

.

Lorex was the first to market 4K resolution security cameras and more recently released the Fusion Collection, which offers recording for both wired and wireless cameras.

.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cloud App. Refer to the Lorex Cloud App Product Compatibility Chart for a list of compatible recorders.

.

Changing Your Password via Your Recorder

.

Retrieving your device ID

Lorex Devices Password Reset Detailed Guide.

Changing or Resetting Your Recorder’s Password

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex App. Refer to the Lorex App Product Compatibility Chart for a list of compatible recorders.

.

Table of contents:

.

Change or Reset Your Recorder’s Password Through the Lorex App

.

Change Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through the Lorex App

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (New Local UI)

.

Change Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (New Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > Users > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Change or Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

.

Change Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Log in to your recorder using the recorder username (default: admin) and your current password.

2.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

3.Under the admin username, click the icon  underneath Edit.

4.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

.

Reset Your Recorder’s Password Through Your Recorder (Old Local UI)

Note: Only the device owner has the authority to change the recorder’s password; shared users do not possess this capability.

1.Launch the Lorex app and log in to your account.

2.Tap  above your recorder’s thumbnail.

3.Tap the Device Settings icon (•••) at the top right of the screen.

4.Tap Device Info > Device Password > Forgot device password.

5.Input the email address linked to your account, then tap Send Reset Instructions.

6.Check your email to retrieve the temporary password.

7.Log in to your recorder using the recorder username (default: admin) and your temporary password.

8.From the Liveview display, right-click to open the Quick Menu, then click Main Menu > ACCOUNT > User.

9.Under the admin username, click the icon  underneath Edit.

10.Adjust the following settings:

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

Your recorder’s new password is now ready for use during login.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Cirrus App. Refer to the Lorex Cirrus App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Cirrus App

Note: You cannot reset your password with the Lorex Cirrus App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Cirrus App.

1.Tap the  icon in the top left corner of the Lorex Cirrus app.

2.Select Devices.

3.Tap Edit under your desired recorder.

4.Tap Change Password.

5.Fill in the required fields as follows:

.

Changing Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

.

Resetting your Password

1.Login to your system using the reset password.

2.From the Live View screen, click >  Setup > User.

3.From the list of accounts, find the row for the account you want to update and click 

This password will be used to connect to your system from now on.

.

Resetting Your Password (LHA / LNK Series)

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Pro App)

This article offers guidance on how to change the password of your Lorex recorder for security purposes or reset it in case you have forgotten it.

.

Note: These instructions apply to recorders supported by the Lorex Pro App. Refer to the Lorex Pro App Product Compatibility Chart for a list of compatible recorders.

.

Table of Contents:

.

Changing Your Password via the Lorex Pro App

Note: You cannot reset your password with the Lorex Pro App. To reset your password, you must use your recorder. The following instructions explain how to change your recorder’s password from the Lorex Pro App.

1.Tap the ellipses (…) above your desired recorder in the top right corner of the app.

2.Tap Device Settings.

3.Tap  in the top right corner of the Device Settings page.

4.Tap Modify Device Password.

5.Fill in the required fields as follows:

.

Changing or Resetting Your Password via Your Recorder

Note: When resetting your password, use the temporary password sent to you. The temporary password is valid until the end of the day. If you haven’t received a temporary password yet, refer to “How to Reset Your NVR or DVR’s Password“.

1.From the Live View display, right-click to open the Quick Menu, then click Main Menu.

2.Click ACCOUNT, then the User tab from the side panel.

3.Click  next to the account you want to change the password for.

Note: Ensure your recorder’s new password is between 8 to 32 characters and includes at least 2 character types: lowercase, uppercase, numeric, and special characters.

How to Reset Your Password

There are different processes to reset your password for different types of Lorex products or accounts.

Please select the type of password reset you need:

How to Reset Your Lorex App Account Password

Please note that your Lorex Account and Lorex App account email and passwords are the same. Changing one will automatically change the other.

There are two ways to reset your Lorex App password:

Method 1: App

1. Click Forgot Password on the main app Login screen.

2. Enter your email, a new account password, and click Get Activation Code.

3. Enter the 6-Digit Verification Code sent to your email and click ok.

Method 2: Website

1. Click Recover Password from the Lorex Login page

2. Enter your email address associated with your Lorex Account and click Recover

3. Check your email for your Verification Code.

4. Return to the Recover Password page and input your email address, new password, and verification code that you received.

5. Click Reset and then login using your new credentials.

Further Support

Resetting Your Lorex App password

Resetting Your Lorex Account Password

How to Reset Your NVR or DVR’s Password

Please follow the steps for the app associated with your Recorder

Lorex Recorders Using the Lorex App, Lorex Cirrus App or Lorex Cloud App

Request a temporary password from the website to reset your recorder’s password:

Note: It is necessary to register your product for warranty to request a temporary password for your Recorder.

1. Login into The Warrany Section of Your Lorex Account:

2. Register Your Warranty:

3. Reset Device Password:

4. Use Your Temporary Password:

Further Support

How to Change or Reset Your Recorder’s Password (Compatible with Lorex App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cirrus App)

How to Change or Reset Your Recorder’s Password (Compatible with Lorex Cloud App)

.

Support Hours Eastern Time:

Mon to Fri: 10:00AM – 9:00PM

Sat & Sun: Closed

How to Locate Your Recorder’s System Information

To complete the temporary password request form on the website, please gather the following information:

System Date: Located in the top-right corner of the screen once the recorder is powered on.

Device ID: Located on the QR code sticker attached to the outside of your recorder.

Device Model: Located in the INFO section from the Quick Menu of your recorder (the device ID can also be found here).

Once you have the Device ID at hand, please take a picture of the Device Info screen and the sticker with the serial number found on the unit.

.

How to Reset Your Smart Home Camera’s Password

To ensure your privacy and prevent any unauthorized attempts to gain access to your camera, there is no way to reset your smart home camera’s password. The camera will have to be reset to its factory default.

How to restart or factory reset your IoT Device:

Further Support

Wi-Fi Security Camera – How to reset your device

How to Reset Your IP Camera’s Password

If you have forgotten the password to one of your IP security cameras, you will either need to reset the camera manually. Please see your camera’s documentation to see if there is a reset button.

Reset Button:

If your IP Camera includes a reset button, you can hold the button down to revert it to its default setting. This will allow you to set up the camera again through your NVR with a new password.

Wi-Fi Security Camera – How to change password

We recommend using strong passwords for the Lorex App app and all cameras connected to it, and changing them on a regular basis.

This guide applies to the following products: W281AA, W282CA, W261AS, W261AQ, LNWDB1, and V261LCD.

.

How to change device password

Here’s how to change the password of your camera.

Step 1. Launch the Lorex App app, and tap Device Settings.

Step 2. Tap the Name of your device.

Step 3. Tap Device Password.

Step 4. Enter your Old Password, followed by the New Password, Confirm Password, and tap the Save icon.

NOTE: You’ll get a prompt that you’ve sucessfully updated your device password.

.

How to change Lorex App account password

Here’s how to change the password of your Lorex App account.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Tap Change Password.

Step 5. Enter your Current Password, followed by the New Password, then tap Done.

NOTE: You’ll get a prompt that you’ve sucessfully updated the password of your Lorex App account.

You’ll also be loggged out automatically. You must re-login using your new password

.

How to enable or disable fingerprint login

If your smartphone supports fingerprint login, you can use it to sign in to your Lorex App.

Step 1. Launch the Lorex App app, then tap Account at the bottom of the screen.

Step 2. Tap Account Settings.

Step 3. Tap Security.

Step 4. Toggle Fingerprint Login button to ON (to enable it) or OFF (to disable it).

.

About this Document

Safety Instruction

.

●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

●Firmly connect the plug to the power socket. Do not connect several devices to one power adapter. Power off the device before connecting and disconnecting accessories and peripherals.

●Shock hazard! Disconnect all power sources before maintenance.

●The equipment must be connected to an earthed mains socket-outlet.

●The socket-outlet shall be installed near the device and shall be easily accessible.

●For the device with the sign  indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.

●Never place the device in an unstable location. The device may fall, causing serious personal injury or death.

●Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

●High touch current! Connect to earth before connecting to the power supply.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

●Use the device in conjunction with an UPS, and use factory recommended HDD if possible.

●This equipment is not suitable for use in locations where children are likely to be present.

●CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

●Do not ingest battery. Chemical Burn Hazard!

●This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

●Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

●Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

●Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

●Dispose of used batteries according to the instructions.

●Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

●Keep body parts away from motors. Disconnect the power source during servicing.

●Use only power supplies same with the original model, or LPS power supplies with the same voltage and electric current.

Preventive and Cautionary Tips

.

Before connecting and operating your device, please be advised of the following tips:

●The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.

●The device shall not be exposed to water dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

●No naked flame sources, such as lighted candles, should be placed on the device.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains. The openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.

● identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

● + identifies the positive terminal(s) of the device which is used with, or generates direct current, and – identifies the negative terminal(s) of the device which is used with, or generates direct current.

●If the device has been powered off or placed for a long time, its coin/button cell battery may run out power.

●When the coin/button cell battery runs out power, the system time would be incorrect, please contact the after-sales service to replace the battery.

●Keep a minimum 200 mm (7.87 inch) distance around the equipment for sufficient ventilation.

●For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.

●Do not touch the sharp edges or corners.

●When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to make the HDD temperature in S.M.A.R.T. below the stated value.

●Provide a surge suppressor at the inlet opening of the device under special conditions such as the mountain top, iron tower, and forest.

●Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.

●The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.

●The serial port of the device is used for debugging only.

●If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure.

●If a power adapter is provided in the device package, use the provided adapter only.

●For the device with sticker or , pay attention to the following cautions: CAUTION: Hot parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching off before handling the parts.

●If the device needs to be installed on the wall or ceiling,

1.Install the device according to the instructions in this manual.

2.To prevent injury, this device must be securely attached to the installation surface in accordance with the installation instructions.

●Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power adapters may decrease.

●Make sure that the power has been disconnected before you wire, install, or disassemble the device.

●If the device needs to be wired by yourself, select the corresponding wire to supply power according to the electric parameters labeled on the device. Strip off wire with a standard wire stripper at corresponding position. To avoid serious consequences, the length of stripped wire shall be appropriate, and conductors shall not be exposed.

●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Hikvision New GUI 5 User Guide

Content Convention

.

In order to simplify description, please read the following conventions.

.

.

.

Reason

Solution

.

Note

If your video recorder notifies not support this function, you can log in to the camera, and adjust video parameters via web browser.

.

Reason

The camera password is too weak.

Solution

Change the camera password.

.

.

Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

.

.

.

Reason

The camera encoding format mismatches with the video recorder.

If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/ MJPEG, change the camera encoding format to the same as video recorder.

.

.

Solution

Check if the encoding type at live view toolbar is H.265.

.

.

Reason

The video recorder uses the same IP address as other devices.

Change the IP address of video recorder. Ensure it is not the same as other devices.

.

Intelligent Operation – Smooth UI experience

Intuitive live view

• Check the real-time channel status clearly

• With customized views, live views can be more intuitive on one view layout and enable automatic switching to meet the needs of multi-screen timed switching

The conventional video searching methods usually are time-consuming. Right now, the Smart Search and the AcuSearch functions could help accelerate searching efficiency in minutes, even in seconds.

Smart Video Searching

The NVR 5.0 with converged functions provides support for video, audio, alarm, access control, and other application access. Creating intelligent applications for different scenarios and needs.