Some countries known for producing electronic and security equipment include the United States, South Korea, Taiwan, Japan, and several European countries. Keep in mind that the global supply chain is interconnected, and components from various countries may be used in the production of a single device.

Security Camera Manufacturers

Axis Communication

Origin: Sweden

Made in: China, Taiwan, Malaysia, Hungary, Israel, Sweden

All Axis products are compliant with NDAA

Axis Communications AB is a Swedish manufacturer of network cameras. Axis primarily operates in physical security and video surveillance industries.

Axis referred to a statement confirming their “entire product portfolio” is NDAA-compliant. Axis added that past non-compliant products could still be available from resellers, saying: “Previously we used HiSilicon chipsets in a very small number of products (Companion hardware products). It’s possible that some of these products still can be purchased by some of our resellers, but today Axis only offers NDAA-compliant products.”

Best Selling Axis NDAA Products

See the list of Axis NDAA compliant products

Bosch

Origin: Germany

Made in: Germany, China, Vietnam, Israel, Belgium

US-Listed Bosch Products are compliant with NDAA

Bosch, is a German multinational engineering and technology company headquartered in Gerlingen, Germany.

Bosch referred to a statement confirming their US listed products portfolio is NDAA-compliant and moving forward, all products manufactured for the U.S. market will be NDAA compliant as well.

Bosch also shared a list of products that manufactured in Portugal and Mexico. Portugal and Mexico are countries that are included in the Trade Act Agreement. This means that the listed products are TAA compliant.

Best Selling Bosch NDAA Products

See the list of Bosch NDAA compliant products

Mobotix

Origin: Germany

Made in: Germany

All Mobotix products are compliant with NDAA

MOBOTIX is a leading manufacturer of premium-quality intelligent IP video systems. MOBOTIX was founded in 1999 and is based in Langmeil, Germany.

Mobotix referred to a statement confirming their “entire product portfolio” is 100 percent NDAA-compliant.

“MOBOTIX is fully committed to adhering to NDAA Sec 889 (a)(1)(B) guidelines. We are not allowing any substantial or essential component from a supplier that is named in this section. This includes any component necessary for the proper function or performance of a product or system.”

Best Selling Mobotix NDAA Products

See the list of Mobotix NDAA compliant products

Pelco

Origin: United States

Made in: United States

All Pelco products are compliant with NDAA

Pelco Incorporated is an American-based security and surveillance technologies company, founded in 1957 and headquartered in Fresno, California.

“Pelco product lines do not use or incorporate any essential components or critical technology including SoCs produced by NDAA banned component vendors, nor does Pelco OEM any product lines produced by NDAA banned manufacturers. Also, Pelco was acquired by Motorola and Motorola has declared its intention to also make Pelco products in the USA.”

However, Pelco shared list of 4 GFC Professional series products that non-compliant.

Best Selling Pelco NDAA Products

See the list of Pelco NDAA compliant products

Arecont Vision

Origin: United States

Made in: Taiwan

Arecont Vision has mixed of NDAA-Compliant and Non-Compliant Products

Arecont Vision Costar, LLC is a US-based company founded in 2018 to offer complete video surveillance solutions to customers around the world.

The entire MegaIP camera family, all of the Contera NVRs models include both NDAA (National Defense Authorization Act H. R. 2500) and ONVIF compliance. By the Q3/Q4 of 2021 most of the newer Contera line of cameras will be NDAA as well. Here the Arecont Vision Costar’s NDAA compl

Digital Watchdog

Origin: United States

Made in: Korea

Digital Watchdog products are mostly compliant with NDAA

DW is the industry leader in digital recorders, surveillance cameras and management software. Founded 1987 and engineered in the USA and Korea.

Digital Watchdog referred to a statement confirming most of their product portfolio is NDAA-compliant.

“The following Digital Watchdog cameras, encoders, network video recorders (NVRs) and digital video recorders (DVRs) which do not use or deploy critical components, nor include SoCs produced by NDAA banned component vendors, are compliant with the NDAA.

The products listed below are compliant with GSA Schedules and have been deemed TAA compliant as the final products have been manufactured and substantially transformed within the United States and South Korea, both approved signatory countries designated by the TAA.”

Best Selling Digital Watchdog NDAA Products

See the list of Digital Watchdog NDAA compliant products

Speco Technologies

Origin: United States

Made in: Korea

Speco has mixed of NDAA-Compliant and Non-Compliant Products

Speco Technologies is a manufacturer of video surveillance and audio surveillance products for more than 60 years

Speco Technologies referred to a statement confirming some of their product portfolio is NDAA-compliant.

“Speco is actively moving to exclude components from banned companies. Please find below a list of current active models from Speco Technologies that do not contain any components from (NDAA Section 889 Part B) banned companies”

Best Selling Speco NDAA Products

See the list of Speco Technologies NDAA compliant products

Ubiquiti

Origin: United States

Made in: Korea

Ubiquity products are mostly compliant with NDAA

Ubiquiti Inc. (formerly Ubiquiti Networks, Inc.) is an American manufacturer of wireless data communication and wired products and founded in San Jose, California, in 2003.

Ubiquity referred to a statement confirming most of their product portfolio is NDAA-compliant.

“As of the date hereof and to the best of Ubiquiti’s knowledge, the products listed below do not contain a substantial or essential component or use critical technology produced by Huawei Technologies Company, ZTE Corporation, Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company or Dahua Technology Company (or any known subsidiary or affiliate of such entities).”

Honeywell

Origin: United States

Made in: Korea

Honeywell has mixed of NDAA-Compliant and Non-Compliant Products

Honeywell International Inc. is an American publicly traded, multinational conglomerate headquartered in Charlotte, North Carolina.

Honeywell referred to a statement confirming some of their product portfolio is NDAA-compliant.

“The Honeywell 30 Series, 60 Series and Modum IP cameras are designed for use as part of video systems which comply with NDAA 2019, Section 889. In addition to the 30/60/Modum Series cameras, our MAXPRO® and Pro-Watch® VMS/NVR ranges, our 30 Series Embedded NVRs and our ADPRO iFT/iFT-E IP NVRs follow our extensive cyber testing process and do not contain components from any of the companies highlighted in NDAA 2019, Section 889. Together with the Series 30/60/Modum cameras they can be used to provide video systems compliant with NDAA 2019, Section 889”

Panasonic

Origin: Japan

Made in: Japan

Panasonic i-PRO products are mostly compliant with NDAA

In October 2019, i-PRO became independent from Panasonic to establish the Image Sensing Business.

Panasonic i-PRO didn’t share a a public statement on their website and didin’t provide a list of NDAA compliant (or non compliant) products. Here the statements they made in different channels.

“All Panasonic-branded cameras sold in the U.S. are engineered, manufactured and quality assured solely by Panasonic. As such, they are not impacted by the NDAA legislation (federal ban).

For those valued partners that attended our 2019 Partner Summit, we committed to you that, not only will our i-PRO line be 100% non-Hisilicon by the end of March 2021, but many of our products will also be TAA compliant.

The Advidia camera lineup is not fully NDAA compliant at this time. We are working with our 3rd-party manufacturers to ensure full NDAA compliance by March 2021″

Hanwha Vision (Samsung Techwin)

Origin: South Korea

Made in: South Korea

Hanwha Techwwin products are mostly compliant with NDAA

Hanwha Techwin founded 1938 as Samsung Techwin, is a surveillance and optoelectronics company. The company headquartered in South Korea.

Hanwha Techwin referred to a statement confirming most of their product portfolio is NDAA-compliant.

“Hanwha Techwin is committed to complying with all government and international trade regulations. Hanwha Techwin supports NDAA-compliance across its product lines and has a full suite of trade-compliant devices, with many currently used in government, defense and a range of commercial applications.

All Hanwha Techwin manufacturing facilities are located in Vietnam and South Korea, making them compliant with Trade Agreements Act (TAA) terms and qualifying Hanwha Techwin products for sale under GSA guidelines.”

Best Selling Axis NDAA Products

See the list of Hanwha Vision NDAA compliant products

.

ACTİ

Origin: Taiwan

Made in: Taiwan

Acti products are mostly compliant with NDAA

ACTi, a leading Taiwan-based IP camera manufacturer, offers a wide range of IP camera models that contain SoC made in either Taiwan, Japan or the United States.

Acti referred to a statement confirming most of their product portfolio is NDAA-compliant.

“ACTi is providing more than 150 different camera models that contain SoC components from very respected and accepted global brands from Taiwan, Japan and the United States. As the technology research company, ACTi has also developed its own SoC, called A1, which can be found in the wide range of ACTi cameras today.”

Best Selling ACTi NDAA Products

See the list of Acti NDAA compliant products

GeoVision

Origin: Taiwan

Made in: Taiwan

GeoVision has mixed of NDAA-Compliant and Non-Compliant Products

GeoVision Inc. is a manufacturer of intelligent video surveillance systems founded in 1998 in Taiwan.

“GeoVision confirms that the listed products are not manufactured by nor utilize components from Hikvision, Dahua or contain HiSilicon SoCs. The NVR units listed below are manufactured in Irvi

Vivotek

Origin: Taiwan

Made in: Taiwan

Vivotek products are mostly compliant with NDAA

VIVOTEK Inc. was founded in February 2000. The Company markets VIVOTEK solutions worldwide, and has become a leading brand in global security surveillance.

Vivotek referred to a statement confirming most of their product portfolio is NDAA-compliant.

“The listed VIVOTEK cameras and network video recorders (NVRs), which do not use or deploy critical components including SoCs produced by NDAA banned component vendors, are compliant with the NDAA. These products will be included in VIVOTEK’s GSA contracts and are recommended for US Government applications that are subject to the NDAA.”

Best Selling Vivotek NDAA Products

See the list of Vivotek NDAA compliant products

Can I use security cameras that are not produced in China?

Yes, you can certainly choose security cameras that are not produced in China if you have concerns about the origin of the products. Many companies around the world manufacture security cameras, and you can find alternatives from various countries.

When selecting security cameras, it’s essential to consider factors beyond just the country of origin. Look for reputable brands and manufacturers that prioritize security, privacy, and quality. Consider reading reviews, checking certifications, and researching the specifications of the cameras to ensure they meet your requirements.

Some countries known for producing electronic and security equipment include the United States, South Korea, Taiwan, Japan, and several European countries. Keep in mind that the global supply chain is interconnected, and components from various countries may be used in the production of a single device.

App Download

Simply download the Vichome app from the Apple Store (iOS devices) or Google Play (Android devices) and have full control over all security products. This means that you can monitor your home or property whenever you like.

As a powerful helper, our app will help you stay connected to your home or business when you’re not there and help keep you safe when you are.

NOTES🚩: Vicohome APP is a mobile application and we currently do not provide PC version or iPad version of the APP.

We greatly appreciate your support and welcome to stay tuned for more.

LongPlus Camera Setup Guide

🔎DOWNLOAD  TODAY📲

【OR】Press and hold this QR code to automatically identify and install

How to properly install the security camera?

🟠 When installing security cameras, LongPlus always recommends placing cameras up high. The outdoor installation location should be 7ft away from the ground. Here are the best places to install security cameras around your home: front & back doors, garage & driveway, yard, common areas, main stairway or hallway, or any side doors or large first-floor windows that an intruder could gain access through.

🟠 Typically, home cameras are placed in the corners of the room to optimize the viewing angle. LongPlus recommends at least two cameras to fully cover a large space, such as a living room. To fully monitor your home, users can add cameras in each room to achieve a complete home monitoring system.

🟠 Battery cameras can not be installed behind a window/glass if you want to use the “Motion Detection” feature.

Battery cameras use PIR (passive infrared) motion detection, an energy-efficient (saving battery power) technology that captures motions by detecting infrared radiation (radiant heat) emitted or reflected by objects. When the camera is mounted behind a window/glass, infrared radiation does not pass through the window/glass. As a result, the “Motion Detection feature” does not work reliably. If you want the camera to detect motions outside, it is recommended that you mount the camera outside.

For plug-in/wired cameras, the answer is yes, as they use camera video analytics rather than PIR sensors to detect motions. As long as they “see”, they can detect motions. So you can mount the camera behind a window/glass with confidence.

How to find the serial number of LongPlus security camera?

🟠 Each LongPlus security camera has a serial number. These are usually located on the body label of the security camera, starting with S/N:*****. Also, if you’ve added your camera to the app, you can also tap the camera “setting” icon > tap the “>” extension icon > tap the “More info” button to find the camera’s serial number.

Is LongPlus security camera waterproof?

🟠 Yes. The waterproof rating of LongPlus camera is IP65. It can be “protected against water jets from any angle”. Generally, the camera can be used outdoors on ordinary rainy and snowy days. However, it may get damaged in extreme weather. But if the camera is installed under the roof or in a place with some shelter, it can get protection to a certain extent. Besides, please don’t expose the camera’s charging port, power button, and microSD card slot to water.

What do the indicator lights on LongPlus security camera mean?

🔵 Solid Blue Light – The camera is working properly.

🟡 Solid Yellow Light – The camera is charging.

🟢 Solid Green Light – The camera charging is complete.

⚪ No Light – The camera is in sleep/off mode.

Can I talk to someone via LongPlus App?

🟠 Yes, LongPlus security camera features two-way audio capability, which means you can listen and talk to someone in real-time with simple clicks in the App.

Do LongPlus security cameras need an app to work?

🟠 Yes! All LongPlus smart security cameras are connected to the LongPlus APP. Compatible and compatible with the latest versions of iOS/Android devices. Installing LongPlus app is a breeze and it comes with voice prompts to guide you step-by-step in minutes.

What is the default language of LongPlus security cameras?

🟠 The default language of LongPlus security camera is set during production and testing in the factory production process. After connecting with LongPlus APP, the language of the camera will follow the language of the APP.

Can I see the infrared light at night?

🟠 No, the night vision infrared light is invisible to human eyes. If you turn on your phone’s camera and point it at the camera lens, then you will be able to see it.

How to format a Micro SD card?

🟠 Sometimes after inserting a Micro SD card, the camera will report “Please use the app to format your SD card first”, that’s because your Micro SD card is not the FAT32 format that the camera supports. In this case, please tap the camera Setting icon > tap SD card > tap Format to format it.

How to record/save videos on a Micro SD card?

🟠 Installing a Micro SD card does not mean the camera will record a video to the Micro SD card all the time.

When the camera detects a movement, it will record a video to the cloud and the cloud recording will display in the Library in the app. If apart from the cloud recordings you want to save backup videos on a Micro SD card at the same time, you can insert a Micro SD card into the camera.

🟠 Here are tips:

1. Find the Micro SD card slot and insert your Micro SD card: Mostly, the Micro SD card slot is next to the power button and is under the rubber plug of the camera body. However, for some models of cameras, you may need to take off the outer shell of the camera to find the Micro SD card slot.

2. If the Micro SD card is detected, you will hear “SD card detected” at the time when it is inserted, and you can see both the storage of the Micro SD card and “SD Card Video” in the app.

Please note that the camera only supports legitimate brand-name (SanDisk, Samsung, Kingston) Micro SD cards, but may not be able to support no-brand, fake, expansion (the storage is extended), and read-only (you aren’t able to put a file to it) Micro SD cards.

How to view videos on the Micro SD card?

You can view videos on the Micro SD card from the app or on your computer.

To view videos on the Micro SD card from the app, please tap the camera “setting” icon on the app homepage > tap “SD card video” on the “Camera Setting” page > select the date on the top > swipe the screen left and right until the green vertical line overlaps the grey “bubble”( If there is no grey “bubble”, that means there are no motions detected in that period).

If you want to zoom in on the specific time before playing a video, you can swipe two fingers left and right at the same time or tap the “magnifying glass” icon.

How to activate cloud storage?

🟠 The cloud storage we gift you is automatically activated and contains free 3 days rolling cloud storage. You can view the cloud-stored videos in the last 7 days at any time.

When the SD card is full will it overwrite the older files?

🟠 Yes, when the SD card is full, the camera will delete the earlier recorded video so you don’t need to format the SD card manually.

Can the camera be used without a memory card?

🟠 Without a memory card, the recorded video will be automatically saved in the cloud, you can watch the video for nearly 7 days in the cloud.

How long does it take to charge LongPlus camera once?

🟠 It will take about 8 -15 hours to fully charge the camera once. When the security camera is fully charged, the indicator light will turn solid green.

Why can’t the battery be charged?

🟠 The following factors may cause charge failure. Please check them one by one:

(1) The charging device is not suitable, or it malfunctions. Please make sure the power adapter and charging cable are in good condition. The power adapter specification is “5V/1.5A”.

(2) The charging port is defective. Possible causes include: the Micro USB cable and the charger or the charging port of the camera are not plugged in properly; there are objects in the charger or the charging port of the camera.

(3) Please confirm whether there are objects in the camera’s charging port or the charger port and clean it before charging.
Please ensure that the Micro USB cable is in good contact with the ports on both ends of the charger and camera.

(4) You can try to connect the Micro USB cable and the charger to other devices (such as mobile phones or computers) to see if they work normally. If anyone doesn’t work, please change to a new one to try again.

(5) The long-time operation leads to charge port oxidation or internal looseness. Please repair or replace the charge port immediately.
The charging cable is damaged or broken. Please replace the Micro USB cable that can work normally.

(6) The charging cable should not be too long. The required cable length is generally not more than 16 feet (5 m). Please replace the Micro USB cable with a suitable length.

(7) The charging environment is not suitable; excessively high or low temperature makes charging impossible. Please move to a place with an appropriate temperature environment (0°C ~ 45°C) for charging.

If the above are ruled out but the issue still persists, please submit feedback from the app for further technical assistance.

Why can’t the battery be used for a long time?

🟠 The battery life mainly depends on the total working duration of the camera. The following factors may lead to fast battery consumption. Please check them one by one:

1. Users frequently view live streams/The camera is frequently activated to record videos.
In order to make the camera work longer, please avoid turning on the live broadcast for a long time.

2. Poor Wi-Fi connection to the camera
If the camera’s Wi-Fi connection is bad or unstable, it will continue to actively search for networks, so the battery will drain quickly.
Please try to place the camera near the Wi-Fi router. Thick walls, bricks, ceramics, electromagnetic equipment, large amounts of liquid, and large metal objects can interfere with Wi-Fi signals. Please try to avoid these objects.

3. Extremely cold weather shortens battery life
The operating temperature of the camera is -10°~45 °C. Please do not place the camera in an extremely cold environment.

4. Night Sight will consume more battery power
When you enable Night Sight, the camera will enter night mode when the light is darker than the threshold (sensitivity level). Camera performance is improved when it is dark.
Therefore, for sharp nighttime images, we don’t recommend disabling it, although it may drain more battery power. But if you still want to disable it, you can tap the camera “Settings” icon > tap “Lighting Settings” > close “Night Sight”.

How can I extend the battery life?

🟠 The battery life is largely determined by the number of recordings and the number and duration of live. Here are the suggestions to extend the battery life:

(1) To reduce false triggers. Change the location or angle of the camera. Please allow us to explain how motion detection works: when the PIR sensor perceives a change in the environment, motion detection will be triggered. The change in the environment can be a moving object, light change, the alternation of hot and cold air, etc. Particularly common false triggers include trees shaking after being blown by the wind, the cold air of the air conditioning, etc.

(2) Set motion detection sensitivity to Low or Medium. After doing that, the distance the PIR sensor can detect will become shorter so that false triggers may be reduced.

(3) Shorten the recording duration of the camera. Currently, the camera-supported recording durations are 10 seconds, 15 seconds, 20 seconds, and automatic (up to 3 minutes). For your reference:

(4) Set Sleep mode. This feature allows you to schedule the working hours for the camera. Whether the camera enters sleep mode on schedule, or you enable Sleep, the camera will be deactivated. Under this condition, the live feed will not be accessed, motion detection (including push notifications, recordings, and camera alarm) will stop working. This can reduce power consumption to save battery life.

(5) If possible, you can try to watch live feeds or adjust camera settings on your mobile phones less frequently.

(6) To avoid or reduce the battery consumption caused by poor network connection. You can place the camera as close to the router as possible, and try to avoid thick walls, bricks, ceramics, electromagnetic wave equipment, a large amount of liquid, and large metal objects.

(7) We suggest that the camera be installed in a suitable temperature environment (14°F~113°F).

(8) It is generally not recommended that you turn off night vision, but if you do not need to monitor at night (watch live and video), you can turn off night vision.

If the issue persists, please submit feedback from the app for further technical assistance.

Will Wi-Fi environment affect the camera battery?

🟠 Yes, an unstable or poor network environment will cause the camera to transmit data multiple times, the camera keeps actively searching for the network, or even reconnect to Wi-Fi continuously, which will result in faster battery consumption. Multi-layer concrete walls, brick walls, and overcrowded Wi-Fi channels will cause a bad Wi-Fi environment.

To save the camera’s battery life, please ensure that the network connection is strong.

How to charge the camera?

🟠 Connect the Micro USB cable to a 5V/1.5A power adapter.

🟠 Connect the other end of the USB cable to the camera.

🟠 Plug the power adapter into an electrical outlet.

🟠 Use the solar panel to charge.

Battery cameras can be used after being fully charged

The Optiview VMS supports IP/Megapixel cameras, Analog, HD-over-Coax and IP/Network recorders. Another aspect of this powerful system is the fact that the 64-channel preview screens can be opened in up to 4 windows for live viewing up to 256 channels at the same time.

While all cameras will record on their local recorders, the VMS allows for up to 16 channels to record locally on the home or work PC. 36 channels can be chosen for playback in increments of 24 hour periods.

.

SOFTWARE DOWNLOADS

Right-click and select “Save Link As”

OTHER DOWNLOADS

VMX SERIES SUPPORT

Downloads / Files / Support

Welcome to the comprehensive support page for the Optiview VMX video monitoring platform. This platform, offering both VMX and VMX+ versions, is a potent, integrated solution for single and multi-site surveillance and access control systems. Whether you’re a first-time user or seasoned expert, we’re committed to ensuring that your experience with the Optiview VMX platform is seamless. This page is your hub for downloading all the necessary software and related materials for the Optiview VMX system. As always, if you need more in depth support, call our US based text support line at 904.855.1121.

.

OPTIVIEW VMX

INTEGRATED MULTI-SITE MANAGEMENT SYSTEM

for Single and Multi-Site Surveillance and Access Control Systems

OVERVIEW

The Optiview VMX and VMX+ remote viewing platforms are both powerful, all-in-one professional, project level video surveillance management software. The Optiview VMX Client can be downloaded for free, and will support up to 64 network cameras and intercoms, and supports 1 user account. View up to 512 cameras and 256 Video Intercom devices, integrate multiple access control units, and access advanced analytics by upgrading to the Optiview VMX+.

The Optiview VMX/+ provides user rights management, device management, alarm management, video wall output, and two-way audio. In addition to these VMS features, Optiview VMX/+ offers advanced features, including support for real-time face recognition and robust event management controls.

FEATURES

SOFTWARE DOWNLOADS

OTHER DOWNLOADS

To view the product pages for Optiview VMX Free and VMX Plus click the link below:

Optiview VMX Free

Optiview VMX+

COMPATIBILITY

Optiview VMX is compatible with all Optiview IP-enabled devices: network cameras, NVRs, DVRs, video intercom devices, and access control devices. The server is also compatible with the ONVIF protocol, so it can connect to ONVIF-enabled third-party devices, such as some of Optiview’s third party manufacturers. Call your account managers to talk about our compatability matching.

PLAYBACK

The Optiview VMX platform allows for quick and easy playback of surveillance footage from both the Live footage interface, and the Playback interface. Users can search by time, date, or event type. Users can also zoom in on the timeline, and drag through the timeline with video scrubbing. Download multiple video files at a time, take single frame snapshots, or a ‘burst’ of snapshots.

SMART SEARCH

Search through your surveillance footage quickly and efficiently by using Smart Search, and targeting the area of the screen where motion would have occurred.

INSTANT PLAYBACK

Thought you saw something? Click “Instant Playback” for an immediate jump back in time to 30 seconds in the past to re-review your surveillance footage.

MULTI-MONITOR SUPPORT

Take advantage of complete multi-monitors support.

ADVANCED REPORTING

The Optiview VMX supports heat map, people counting, ANPR license plate capture, attendance and access control reporting.

FLEXIBLE & SCALABLE

Optiview VMX+ supports up to 512 video channels, which includes up to thirty two (32) face recognition cameras. Easily add multiple recorders, cameras, and access control devices from a single-site or from multiple locations around the world.

FISHEYE CAMERA SUPPORT

The software features full support for Optiview Fisheye cameras. The software supports options for the Fisheye camera installation and supports dewarping Optiview’s 360° panoramic fisheye cameras in both live view, and in playback. Because dewarp happens at the software level, the video is always recorded in full fisheye, even if the live view is being dewarped. This allows viewers to see the entire video, and dewarp sections of the video at any given time.

Fisheye

Fisheye Dewarp X4

Fisheye Dewarp X8

REAL-TIME FACE RECOGNITION

The Optiview VMX/+ performs real-time facial recognition on up to two (2) / thirty two (32) channels simultaneously. The software captures and analyzes facial features to determine gender, age, expression, glasses, mustache, and mask, and then can record the faces and store the associated structured data. The server also filters incoming video to display faces that match target features. Facial recognition requires a camera that supports this feature.

ACCESS CONTROL & VIDEO INTERCOM

Optiview VMX offers full support and integration for access control and video intercom products to support a complete security and surveillance system. The server monitors door status and events, manages access rights, and support advanced rules management. In addition to access controls, the server supports two-way communication between intercom and control center.

MANAGEMENT OPERATIONS

The software manages the devices and the user accounts for an entire organization. Operators can assign different camera ranges, active use periods, and business roles for each user. The server also supports different schemes for various events, including IVS, to record and view all event history information.

VISITORS

Quickly register and customize access for visitors.

LPR

Capture license plates in a searchable database.

EMAP

Easily select cameras to view on map.

USERS

Create up to 100 Users per VMX Server.

EVENTS

Track entrance / exit, alarms, access, and more.

.

FREQUENTLY ASKED QUESTIONS

WHAT ARE THE MAJOR DIFFERENCES BETWEEN THE VMS AND THE VMX?

The Optiview VMS and the Optiview VMX are both multi-site remote monitoring software that can be used to view cameras and devices from a centralized location. The VMS is ideal for residential and commercial use, where basic camera surveillance is the primary need. The VMX, however, has an advanced access control module, and can support advanced surveillance such as facial recognition, traffic density, ANPR license plate database capture, and more. See which software is right for you here!

WHY DO I HAVE TO START USING THE VMX?

The free Optiview Video Management Software (VMS) is our legacy remote viewing software, and will no longer be supported going forward. Instead, download our all new Optiview VMX, our powerful new remote viewing software; The user is able to choose between a free VMX, and a more advanced VMX+ with additional features. The new VMX and VMX+ provide a more stable management and viewing platform for CCTV and Access Control, as well as providing many new features. Not sure which solution is right for you? Contact an Optiview Account Manager or compare the Optiview VMX and VMX+ here.

Features Gained:

Optiview’s VMX will support Optiview legacy equipment as well as the latest in megapixel, analytic, and edge recording technology.

WHAT IS THE DIFFERENCE BETWEEN THE FREE VMX AND PAID VMX+ VERSION?

The free version of the Optiview VMX supports 64 video channels, 2 ANPR channels, 2 facial recognition channels, 64 access control channels, 2 POS channels, 4 attendance devices, 2 alarms, and supports only 1 online user at a time.

The paid version allows the user up to a maximum of 512 video channels, 200 access control devices, 1024 doors, 32 video intercom devices, 32 facial recognition cameras, 100 alarms, 32 license plate capture cameras, and supports up to 100 online users.

See which software is right for you here!

WHEN WILL THE VMS STOP BEING SUPPORTED AND AVAILABLE?

The Optiview VMS 2018 will continue to be available to download for a limited amount of time, but will no longer be supported going forward.

WHAT IS THE MAXIMUM NUMBER OF DEVICES THAT CAN BE PUT ON THE FREE VMX OR THE PAID VMX+?

The free version of the Optiview VMX will suport up to 64 cameras. If the user wants to view more than 64 cameras, they will have to purchase the Base License, and then an additional license for each channel, up to 512. See which software is right for you here!

HOW DO I UPGRADE FROM THE VMS TO THE VMX?

The VMX software is completely different from the Optiview VMS and a user can use both. The VMX Server and Client software can be downloaded here.

WHAT IS THE DIFFERENCE BETWEEN THE VMX SERVER AND THE VMX CLIENT?

The server runs all the services and acts as a connection point for several clients that will handle the management of configurations, devices and integrations of one or more IP devices supported by the Optiview VMX software.

IF I HAVE THE SERVER DOWNLOADED, HOW DO I DOWNLOAD THE CLIENT?

The client can be downloaded using the link from the server user interface labeled as “Download Client”. I also made a link for the Client software within our technical support page which Georgia can use, to make a download link within the product resource page.

CAN I DESIGNATE THE NUMBER OF CAMERA CHANNELS BEING SEEN BY THE VMX PER DVR OR NVR?

Yes. The number of cameras “actually” in use by a device (for example a 32-ch NVR) can be designated within the VMX so that it can only sees the actual number of channels. For example, If a user is using multiple 32 channel recorders but not all channels, the VMX can be set to not count every single channel and maximize the usage.

CAN I DESIGNATE THE NUMBER OF ACCESS CONTROL DOORS BEING SEEN BY THE VMX?

No. Whatever the maximum number of doors that an access control panel can handle is, that is what the VMX will see. For example, a CAS-4MC (4 door master control panel) is expandable up to 64 doors, so this will max out the VMX. No additional master control panels can be added unless the user upgrades to the paid version of the Optiview VMX.

CAN I SEE THE HUMAN TEMPERATURE DETECTION & NOTIFICATION SOLUTION ON THE VMX?

The human temperature text overlay can be seen at LIVE mode and Playback mode at the VMX.

HOW MANY USERS CAN ACCESS THE VMX AT ONE TIME?

For the FREE version, only 1 user can access the VMX at any given time, regardless of how many clients are downloaded. With the paid version, up to 100 active users are able to access the VMX Server at any given time via multiple clients. See which software is right for you here!

.

1. Blue Iris

2. ZoneMinder

Best Computer Programs for CCTV Surveillance Systems

Read Also : What is DMSS App & How it works?

3. SecuritySpy

4. iSpy

5. Shinobi

6. Luxriot EVO

7. Kerberos.io

8. Xeoma

9. Contacam

10. MotionEyeOS

11. Anycam.io

12. Axxon Next

13. ZoneTrigger

14. MacEye

15. DVRViewer

Conclusion

Choosing the right CCTV surveillance software depends on various factors including platform preference, required features, scalability, and budget. Whether you are looking for a robust enterprise solution, a user-friendly home system, or an open-source project, the programs listed above provide a wide range of options to meet different needs.

I’ve wanted to make this list for a while, and hopefully it will help answer some simple questions or guide newcomers on their IP video quest. Feel free to add, change, or refine this!

 .

Most Popular Camera Manufactures (on this forum):

ACTi (http://www.acti.com) – Midrange camera – good price – free software.

Avtech (http://www.avtech.com.tw) – Has good ‘push’ support for events to mobile devices.

Avigilon (http://www.avigilon.com) – Similar to Axis cost – must buy through dealer – good software/support.

Axis (http://www.axis.com) – Popular choice – higher end cameras get expensive – easy to find online for sale – free + paid software options.

Dahua (http://www.dahuasecurity.com‎) – Re-branded as Q-See – low price – difficult to find updates/support.

Geovision (http://www.geovision.com.tw‎) – Midrange – have some LPR cameras.

Grandstream (http://www.grandstream.com) – Low cost – have some unique features.

Hikvision (http://www.hikvision.com‎) – Becoming more popular – re-branded as Lorex/Swann systems from Costco.

IQinVision (http://www.iqeye.com) Midrange pricing.

Mobotix (http://www.mobotix.com) – Cameras made in Germany – reliable but expensive – no moving parts to fail in their cameras.

Vivotek (http://www.vivotek.com) – Midrange pricing.

 .

Other Camera Manufactures:

Arecont (http://www.arecontvision.com/‎)

Brickcom (http://www.brickcom.com/)

Bosch (http://www.boschsecurity.us/en-us/ProductInformation/Cameras/NetworkCameras/)

Canon (http://www.usa.canon.com/cusa/professional/products/security_video_solutions/network_cameras)

GE (Unknown Website Address)

Honeywell (http://www.honeywellvideo.com/products/cameras/ip/index.html)

JVC (http://pro.jvc.com/prof/attributes/category.jsp?productId=PRO5.2)

Panasonic (http://www.panasonic.com/business/psna/products-surveillance-monitoring/index.aspx)

Pelco (http://www.pelco.com/sites/global/en/home.page)

Samsung (https://www.samsung-security.com/)

Sony (http://pro.sony.com/bbsc/ssr/mkt-security/)

Toshiba (http://www.toshibasecurity.com/)

 .

IR Illuminators:

Raytec (http://www.rayteccctv.com/)

Axton (http://www.axtontech.com/)

Iluminar (http://www.iluminarinc.com/)

+Other Generic Brands

 .

Accessories:

PoE Switch (Unmanaged, or Managed which allows remote powering on/off of specific ports) (TRENDnet, Netgear, D-Link, Cisco, Axis, etc.)

Ethernet Cable (Regular/Burial Grade)

Lenses (C/CS/S/D Mounts)

IR Illuminators (Discussed Above)

Enclosures (Pelco, Videolarm, Axis, Generic Brand, etc.)

PIR Sensor (Optex, Bosch, etc)

UPS Battery Backup System

 .

Popular Places To Buy:

[Redacted – do a search on the forum for general ideas ]

 .

Video Recording Software:

ACTi VMS (Free) – Only supports ACTi Cameras.

Avigilon (Per channel: Core ~$100, Standard ~$200, Enterprise ~$350) – Purchase through authorized dealers.

Axis Camera Companion (Free) – Only supports certain (newer) Axis Cameras. 16 cameras max.

Axis Camera Station (~$90/license)

Axxon Next (Free for 16 channels) (http://www.axxonsoft.com/products/axxon_next/)

BlueIris ($29.95 – $49.95) (http://blueirissoftware.com/) – Supports a large variety of network cameras.

exacqVision ($50 – $150/license + $25 yearly for optional updates)

Genetec (Expensive)

Geovision (Free)

Luxriot ($99 – $1000+)

Milestone XProtect (Free – $1000+)

Mobotix Control Center (Free) – Supports other cameras for viewing. May be able to record with MXServer.

OnSSI (Unknown)

Vitamin D (Free/$49/$199) (http://www.vitamindinc.com/index.php) – PC + Mac Compatible

Zoneminder (Free) – Open source Linux software.

…Etc, Most Manufactures Provide Their Own Software.

 .

Network Video Recorders (NVR’s)/NAS Stations:

Synology (1 License Included – ~$50 /per additional license)

Dahua

QNAP

Luxriot

NUUO

Hikvision

 .

iPhone Viewing Apps:

Netcam Viewer (Free/$5.99) (http://bit.ly/18UfXMs)

Live Cams Pro ($1.99) (http://bit.ly/19RAleQ)

QCamPro ($7.99) (http://bit.ly/14iCWxR)

Official Mobotix (Free) (http://bit.ly/15XNtmo)

IP Cam Viewer Pro ($3.99) (http://bit.ly/10QAwYn)

Dahua iDMSS Lite (Free) (http://bit.ly/110ZjmV)

Dahua iDMSS Plus ($4.99) (http://bit.ly/12FyWpw)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

 .

Android Viewing Apps:

IP Cam Viewer Pro ($3.99) (http://bit.ly/TG6OyB)

Dahua gDMSS Lite (Free) (http://bit.ly/12zjvAs)

Dahua gDMSS Plus ($5.00) (http://bit.ly/12FzfAA)

+Specific Manufacturer’s Apps (Q-See, Hikvision, etc) (Search Manually) – Typically better integrated then 3rd party apps.

The Ultimate IP Camera Guide v3.

Review Sites/Sample Videos:

Network Camera Critic (http://www.networkcameracritic.com/)

Mateusz CCTVnerd (http://www.youtube.com/user/mateuszfen)

Megapixel Cameras – Images and Demos (viewtopic.php?f=19&t=11322)

Plazor (http://www.plazor.com)

Axis YouTube Channel (http://www.youtube.com/user/AxisCommunications)

Avigilon YouTube Channel (http://www.youtube.com/user/Avigilon)

MXInstaller (http://www.mxinstaller.com/)

 .

Companies That Rebrand/Resell:

Swann (Rebrands Hikvision Equipment)

Lorex (Rebrands Hikvision Equipment)

Q-See (Rebrands Dahua Equipment)

Toshiba (Appears To Rebrand Vivotek)

Cisco (Sometimes Rebrands Pelco)

 .

Other Helpful Links:

CCTV Lens Calculator (http://www.jvsg.com/online/#)

Identification And Recognition Guide (http://www.axis.com/academy/identification/index.htm) – Make sure you have the correct resolution for your application.

Security Today – IP Cameras (http://security-today.com/directory/list/ip-video.aspx)

CCTV Frame Rates Comparison (

) – Recordings don’t necessarily have to be 30fps for desired results.

IP Video 101 Training (http://ipvm.com/report/ip_video_training_course_101)

 .

Live Demo Cameras:

Mobotix Cameras (http://www.mobotix.ro/live-ro-p-3.html) or (http://comsurv.com/live-video-cameras/)

Axis Cameras (http://www.axis.com/camerademo/) or (http://ipcameralive.com/)

Mixture (http://camelive.info)

 .

Terminology:

CBR: “Constant bit rate [encoding] means that the rate at which a codec’s output data should be consumed is constant.” (i.e. the amount of data flowing from camera to user/nvr is always constant – even during movement or lack thereof. [See also VBR])

DSD: (http://www.dsdcctv.com/)

DVR: “a consumer electronics device or application software that records video in a digital format to a disk drive, USB flash drive, SD memory card or other local or networked mass storage device.”

Edge Recording: “The concept of taking audio/video from a camera, and storing it at the edge of the Ethernet network instead of transporting it across the network to a centralized recording facility such as a Network Video Recorder.” (Most cameras have this ability now.)

IR/IR Illuminator: LED’s (often a separate device) which provide illumination for cameras in near to total darkness. The light produced cannot be seen by the human eye. The camera must be sensitive to IR for this to be useful (some cameras have ‘fixed’ IR cut filters). ‘White light’ illuminators are also available. These produce light visible to the human eye and to a camera with or without an IR cut filter.

LPR/ANPR/AVI/CPR/LAPI: “A mass surveillance method that uses optical character recognition on images to read vehicle registration plates.”

NAS: Basically a box filled with hard drives for storage of data. Some cameras have the ability to record directly to these networked boxes without the need for an always on or dedicated computer.

NVR: “A software program that records video in a digital format to a disk drive, USB flash drive, SD memory card or other mass storage device.”

ONVIF: “Open Network Video Interface Forum (ONVIF) is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products.”

PIR: Passive Infrared “is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.”

PoE: “A system to safely pass electrical power, along with data, on Ethernet cabling.”

UPS: “uninterruptible power supply…is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.”

VBR: “Variable bit rate files vary the amount of output data per time segment.” (i.e. Less data during still scenes, more data during high movement periods.)

WDR: “‘Wide dynamic range’ describes an attribute of an imaging system which can capture greater scene details from shadows to highlights than normal.”

 .

Commonly Asked Questions:

Q: “Which brand or manufacturer should I buy?”

A: Each brand has its strengths and weakness, whether it be price, size, low light capabilities, resolution, frame rate, support, software, compatibility, etc. There really isn’t one magical brand or camera. Each security scenario is different and requires a unique solution.

 .

Q: “Where can I buy an IP HD PTZ Outdoor Camera for $200?”

A: Probably not going to happen. PTZ cameras are expensive because of all the motors, belts, gears, and such. Perhaps instead consider using several fixed multi-megapixel HD cameras instead for coverage.

 .

Q: “How do I embed/add video from a camera to a website?”

A: See: http://www.networkcameracritic.com/?p=1290 or http://bit.ly/10rC8WV

 .

Q: “How do I view my cameras on my TV/Monitor?

A: Consider using an Android powered HDMI dongle. These mini computers are powerful and compact enough to be attached to a TV or monitor for camera viewing using an Android app. Also see: http://www.networkcameracritic.com/?p=1049

 .

Q: “Should I buy a Foscam?”

A: These cameras are not typically discussed here because of their poor reliability and feature set. They are often cloned and copied making firmware updates and support hard to come by. So in short, probably not. However if you are just starting with IP cameras, many members have since upgraded from these over time to bigger and better.

 .

Q: “How do I view my camera(s) from the internet?”

A: You need to setup your router for port forwarding. Here are several guides to assist you. See: http://www.networkcameracritic.com/?p=124 or http://bit.ly/184DTvf

 .

Q: “What shutter speed should I use during low light/night?”

A: “Typically 1/30 of a second is as low as you would want to have it set. Any longer and moving objects will be blurry making the footage less then useful.

 .

Q: “Should I use a wireless camera for my application?”

A: Wifi signals, especially at long distances, can drop or become unreliable. They also become targets of hacking “resulting in free access to your personal cameras (EXTREMLY DANGEROUS) or blocked cameras, ones that will not record anything.” It is best to use a hardwired connection via cable for installations. PoE installation can supply signal and power over one cable for easy installation. If a cable is not an option consider using a dedicated wifi access point, like the type made by Ubiquiti Networks.

Technical Guide to IP Cameras– Overview, Types, Applications

.

An IP camera (Internet Protocol Camera) is a type of security camera that receives video data and sends video footage via an IP network. It is also known as network camera or IP security camera, often used as remote monitoring and management tools in many sectors and environments to protect the property or monitor home, business, or public security. Connected with other devices such as network video recorders and displays via a network, IP cameras allow you to monitor specific areas from any remote location, bringing much convenience to our daily lives.

How Does An IP Camera Work?

IP cameras work the same way as digital cameras to capture high-quality images. What sets them apart is the capability of IP cameras to compress those files and automatically transmit them to a network video recorder (NVR) via a network. Usually, IP cameras are connected to the network via ethernet cable with a broadband modem or router, or wirelessly via a Wi-Fi router.

In a building that has already been equipped with a network, all you have to do is to connect the IP surveillance cameras and other devices into your network system, just the same way that you would do when you connect your laptop or cell phone to your Wi-Fi.

After everything is well connected, the cameras can start working, capturing and sending video footage to the network video recorder.

Four Common Types of IP Camera

There are various video surveillance solutions, in which many different types of security cameras are adopted. Among those surveillance cameras, there are four most commonly used ones, dome cameras, bullet cameras, and turret cameras. Knowing more about the differences among dome vs bullet vs turret vs fisheye cameras will help you find out the one that fits you most.

Four Important Specifications of IP Cameras

When looking for a security camera, not only should you decide on the type of it, but also you need to notice that the specifications can make a huge difference. There are four of the most essential specifications.

Resolution

The resolution of IP cameras is the total number of pixels that make up an image, which is usually measured by the width and height of the image. The most common resolutions of security cameras are 720p, 1080p, 5MP, 4K and 8MP. Usually, higher resolutions mean that there are more pixels per inch (PPI), resulting in a high-quality, crisp image.

Field of View

The lens of an IP camera allows you to frame an area that you want to spot. Different lens systems come with different fields of view, which determines how wide an area you can see. A wider field of view will allow the camera to spot a larger area. Typically, for a large parking lot and a small room, you will need lenses with different viewing angles.

Focal Length

The focal length of a lens, which is measured in “mm”, determines the angle of view and how far the camera can see. There are two types of lens, fixed lens and varifocal lens. The most common fixed focal length is 3.6mm, which leads to a 90° view angle and a distance of 20 feet. There is also 8mm lens with a 40° view angle and identification distance of 40 feet. For varifocal lenses, the most common ones are 2.8-12mm lenses.

At 2.8mm you get around 100° view angle, with only around 10-feet identification distance. At 12mm you will achieve around a 30° angle of view and identification at around 50 feet. The wider the focal length, the further away it can focus and the narrower the field of view.

Low Light Sensitivity

Low-light sensitivity, usually measured in Lux(lx), refers to the ability of a camera to provide high-quality images even in low-light conditions by presenting details and reducing noise in the output images. There are few factors contributing to the low light performance of a camera, including pixel size, signal-to-noise ratio, lens aperture, etc. A lower Lux has the ability to present high-quality images in darker areas. For example, cameras with 100-1,000lx are applied to record under work-space light, while cameras with 0.0001lx are usually adopted for moonless nights or overcast nights.

Most Popular IP Camera Applications

Home Use

For those looking for tools to get close with their families, monitor family security or protect family property, IP cameras are always a go-for item. Many homeowners equip their families with a video surveillance system to make themselves and their families feel safer.

The IP cameras installed in home security systems have been used to serve a number of purposes. For example, they can be installed near the front door to capture the image of each one who steps into or sneaks around the house, or installed in the backyard to catch a view of their families’ happy moments, or installed inside the room, to make sure their baby is being well taken care of, etc.

Business Use

Commercial security cameras are often used in business buildings, supermarkets, shops, restaurants, etc. For business owners, security cameras can not only protect their property to ensure normal operations and prevent criminal acts with real-time monitoring, but also can keep them connected with daily operations and employee safety.

Outdoor perimeter security can also be maintained with video surveillance solutions to monitor the surroundings. Compared to traditional systems, commercial IP video surveillance systems offer greater reliability and security with built-in encryption, data compression, network connection, and cybersecurity measures.

Public Safety

Surveillance cameras play an important role in managing public rules, protecting public safety and property. It’s not difficult to find that there are plenty of monitoring cameras along the traffic roads, parking lots and around the governments or hospitals. Moreover, there are lots of public areas deployed with security cameras, including schools, parks, communities, neighborhoods, etc.

Conclusion

IP cameras have become a dispensable part of home, business or public surveillance systems. With the proper video management software, the video recorded by IP cameras can be viewed from anywhere worldwide via the network, whether using a laptop or a mobile phone. In many cases, IP cameras can also be controlled remotely, adding much convenience to our lives.

There are various types of security cameras that are designed for specific applications, and that’s why you need to take several factors into consideration when purchasing IP cameras for your security system. Before the next step, it would be better to figure out your budget and your requirements first.

Guide to Understanding IP Cameras

Welcome to a venture into the captivating digital world of Internet Protocol (IP) cameras. Whether you’re considering investing in this game-changing technology or you’re simply eager to boost your tech acumen, we’ve got your covered. Untangling complex technical jargon and translating it into simple language, this blog post will chart your course through the depths of understanding IP cameras.

What is an IP Camera?

An IP camera , also known as a network camera, is a digital video tool that sends and receives data via the internet. Unlike its analogue predecessor, the CCTV (Closed Circuit TV), it offers the functionality to view live or recorded footage from anywhere, anytime using a web-based platform or mobile application. Think of IP camera as the digital evolution.

Advantages of the IP Camera

.

Understanding IP Camera Operation

Let’s dive deeper into how these fantastic little devices work.

Capturing Images

The essence of an IP security camera is in its lens, sensor, and processor. The lens focuses on the light emanating from the surroundings, which then hits a digital sensor. This sensor transforms the received light into an electronic signal that the processor can turn into a digital video stream.

Sending Images

The key difference between an IP camera and previous systems lies in its ingenious use of the Internet Protocol. Instead of sending unprocessed data to a recorder, IP cameras encode and process the signal on the device before transmitting it to be stored or viewed over the network. This reduces the workload for the recorder, enhancing the system’s efficiency.

.

Most Popular Types of IP Cameras

Not all IP cameras are created equal, of course. Different styles suit different needs. Here’s a quick classification of the most commonly used types:

Bullet Cameras

These are named for their cylindrical shape, resembling a bullet. Bullet cameras are great for monitoring both wide focused areas such as entrances or small rooms.

Dome Cameras

Identified by their dome shape, these cameras provide a wider viewing angle ideal for bigger spaces like living rooms or stores.  Some come with adjustable lenses to hone in on important areas.

PTZ Cameras

PTZ stands for Pan-Tilt-Zoom. A PTZ IP camera provides the functionality to remotely control the movement and zoom of the camera, making it perfect for large, open spaces.

.

IP Camera Installation: Tips and Tricks

Installing an IP camera isn’t rocket science. Here are some friendly tips to ensure you obtain the best surveillance results:

.

Securing Your IP Camera

In an increasingly digital world, security is paramount. Here are a few guidelines to secure your IP camera system:

Change the Default Password

On purchase, devices often come with generic login credentials. It’s essential to change these immediately to a unique and complex password.

Regular Firmware Updates

Stay up-to-date with the latest firmware version provided by the manufacturer. This ensures your device is protected from any known loopholes.

Effective Network Security

Ensure your home or business network security is robust. Use established security measures such as firewalls and secure Wi-Fi protocols.

The captivating world of IP cameras offers the potential for superior surveillance solutions. The charm of hands-on control combined with the convenience of remote access can revolutionize how we approach security. Yet, it is crucial to remember that with great power comes great responsibility. In this digital age, securing our devices should always be a priority. Embrace the technology but don’t forget to keep it secure. Welcome to the future of surveillance.

.

1.Download the mobile APP (Guard Viewer) and Sign up

for an Account

Download the mobile APP and Sign up for an Account

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

2.Add Device to APP(Guard Viewer)

Guard Viewer Security System User Guide v1

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

Add Device to APP(Guard Viewer)

Auto add is not suggested. Please tap on “Later” if you see this message box.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on  “ Menu” icon> Tap on “Devices”> “Add” ,

2.  Tap on “Scan”> “OK ” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at  Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4. add NVR by scanning device QR code and click on “save”

5.    Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6.  Select the device and tap on “Start Live View ”

3.Device shows “Offline” (system kit to app)

Device shows “Offline” (system kit to app)

1. If the device shows offline on the mobile phone app, we need to make sure the NVR is connected to the network perfectly or not

2. Go to your monitor that is connected to NVR, and check out the network status first navigate to this path first: “Menu–Network–Basic–P2P”, also check whether the device status is online or not,

3. Also go to “Menu–Network–Advanced”,to disable the “PPPoE”

4. if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply”. After that, go back to “P2P” and check if the device status is online or not

5. if you connect the network cable to the lan port or the lan/wan port of the router

We need to connect it to the lan port of the router,plz take a photo of yours for us to check.

.

If the P2P show connect the network ,but the app also show the offline,please delect the device on your APP and re-add it again.

4.Enable push alerts on APP

Enable push alerts on APP

5.Why I can’t remote view when the network is outside？

Why I can’t remote view when the network is outside？

.

Cause: Customer doesn’t follow the instructions on the user manual and add the device in a local adding way, so we suggest them to delete the device first, and re-add the device again like this FAQ

https://www.hiseeu.com/a/help/article/53969

6.APP Share Device

APP Share Device

One device is linked to one user only. The NVR system can only be controlled by one authorized account, which can share the device with others to prevent attack or hacking.

There are 2 ways to share the device with others. For the admin user, please follow the instructions to share the device:

1.Type in “Menu Icon ” and navigate to “Devices”

2. Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

3.Share the device by typing in the user name you want to share and selecting the function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigating to “Devices”.

4.Share the device by generating a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

7.Add Device on Guard Station PC Client Software

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

8.Guard Station shows “offline”

Guard Station shows “offline”

plz check local NVR is connected to network perfectly or not,If your NVR hasn’t connected to the network yet, it will show “offline” in your PC Client “Guard Station”

Plz go to your NVR that is connected to Monitor,

Check out the network status, first navigate to this path first : “Menu–Network–Basic–P2P” ,and check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” , After that, go back to “P2P” and check if the device status is online or not

9.Not Recording? HDD not working?

Not Recording? HDD not working?

Right-click the mouse from “Menu–Storage–Hard Disk”

If there is no hard drive information or Status shows Abnormal, the hard drive is having an issue

10.AHD5 Modify the Camera model

AHD5 Modify the Camera model

（Please notice that AHD5 cameras only the TVI camera model have the audio function，the AHD5 cameras we sell seperately is the AHD model so it should modify the TVI model to have the audio function)

1. Click the OSD Menu Control , then click the arrows to the Menu t hen click the icon to select the “VIDEO SETTING ”

2.Select the VDEO SETTING and click the arrow to enter.

3.Then Select the “TVI ” on the HD, then click the “APPLY&REBOOT “and then click the “RETURN “and the “EXlT” back to the Version

4.Finally Turn Audio On

11.Forget DVR Password

Forget DVR Password

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2. If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer)

In NVR interface, tap forgot password.

1. Scan the above QR code by APP “ME–General–Forget Device Password” , and the security code will be sent to your email address.

2. If you haven’t set up an email before, or have any difficulties resetting the password, please take a screenshot of this interface(Serial No. please also make the code is as clear as you can ), and email us at love@hiseeu.com , since we need the serial number to produce a new password by using an internal tool

12.One or two cameras are not working

One or two cameras are not wokring

(1) BNC Cable connected to Camera is broken

Step: Use another BNC cable to connect the camera to have a try

(2) The port of the DVR box is broken

Step: After changing the BNC cable, and still there is no camera image, plz insert the camera into another port of the DVR to have a try

(3) Camera is broken after troubleshooting with the steps （1）-（2）

13.Four cameras or above are not working

Four cameras or above are not working

Four cameras or above not working is an abnormal situation. It’s not only a camera issue, which could be related to a power supply or power splitter connected to four cameras

If the power supply or power splitter connected to four cameras is broken, which can’t provide power supply to cameras

Step:

(1）Change to another 12V 2A Power Supply to connect to four cameras to have a try. We wanna make sure if this is related to the power adapter

(2) Change another 1-4 way power splitter to connect four cameras to have a try. We wanna make sure if this is related to the power adapter

( If you do not have another power adapter/splitter, plz use the other power adapter connected to the four normal cameras)

After making sure the power supply or power splitter is doing fine, but still no camera image, which means the DVR box is having issue

4.Eight Cameras are not working

Eight Cameras are not working

Please check your camera connection is correct ， if the connection is correct ，

i t’s mostly possible the DVR box is having issue, and need a new DVR box replacement

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

15.How to record the event only？

How to record the event only ？

Please click the mouse to the Menu then click the “ Storage ” and then click the “ Recording Schedule ”，“ Select Camera ” then click the “ enable Schedule ” click the “ Audio Storage ” then select the color of record type and fill in the corresponding time and date.

.

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest Orion Download for Windows PC

To download the user manual for the Amcrest Orion software, click here.

For additional information, such as useful articles or other information related to the Amcrest Orion surveillance software, click here.

Amcrest Orion Surveillance Software Download

To download the latest version of Amcrest Orion Surveillance software to your Windows device please click on the link provided below.

Amcrest_Orion_Surveillance_Software.exe

Amcrest Orion Surveillance Software User Manual

To download the Amcrest Orion Surveillance Software user manual, please click on the link provided below.

Amcrest_Orion_Software_User_Manual.pdf

Amcrest Orion Datasheet

To access the datasheet for the Amcrest Orion software, please click on the link provided below.

Amcrest_Orion_Datasheet.pdf

How To Install The Amcrest Orion Surveillance Software

Amcrest Orion is a video surveillance software application that provides an all-in-one, full-featured solution to manage and monitor Amcrest network cameras, NVRs, and DVRs, etc. The software supports up to 64 devices for free with a maximum of 256 channels. It is currently a Windows based only software, however, to download the latest version of this software click here.

For more information on how to install the software, please refer to the information provided below.

Step 1: Download the Amcrest Orion software and open the .exe file.  Select the software license agreement and click Next.

Step 2: Select an Installation Path if needed using the Browse option. Click Install.

Note: Allow the components to install on your computer.

Step 3: Click Run.

Step 4: Select a network mode and the network card and click Next Step.

Step 5: Set the TLS self adaptive mode if necessary. Please note, this is disabled by default but can be enabled if needed. Click Finish.

Note: TLS self adaptive mode is a security feature that allows Amcrest devices to automatically switch between Transport Layer Security (TLS) versions 1.2 and 1.3 depending on the capabilities of the connected device. This ensures that the highest level of security is always used, while also avoiding compatibility issues with older devices.

Step 6: Download the Client software to your computer.

Note: Click proceed anyway in the browser if needed to download the client software.

Step 7: Click Download and follow the steps to install the client software to your computer and run the client software.

Step 8: Enter the IP address found on the server client into the Server Address field. The default username will be system. Enter a password for the client account into the interface, click Next Step.

Note: Set security questions, this information will be used to access your client software if you forgot the password. Click OK. This will load the client software.

How To Add An Amcrest Camera To Amcrest Orion Surveillance Software

Before connecting your device to the Amcrest Orion software, please make sure the device is initialized and on the same network as the computer. You will need the username and password for the device before you are able to add it to the camera. For more information, please refer to the information provided below.

Step 1: Access the client software and select the configuration icon. Select Device.

Step 2: All connected devices should be displayed in the Discover Device menu, however, click the Refresh button to refresh the interface if needed.  Select the device and click Add to Device List.

Step 3: Enter the password for the device and click OK.

The device will be added successfully.

Step 4: To view the device, access the main menu and click on Monitoring Center. Double click the device from the device list to view the live feed.

How to Use the Dewarping Features on a Fisheye Camera Using Amcrest Orion Surveillance Software

Fisheye dewarping (Fisheye unwrapping) provides a correction in the distortion of images obtained from a camera equipped with a fisheye lens. This allows the user to view different aspects and views of the 360° image provided by the fisheye lens of the camera. For more information on how to use the fisheye dewarping functions in the Amcrest Surveillance Pro software, please refer to the information provided below.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Step 2: Select your fisheye camera from the device list to view the live feed. Right-click on the live feed to access the live view options menu. Hover your mouse pointer over Installation Mode and select an installation mode.

Installation Modes Explained

	Wall Mount: This allows you to access preset fisheye features based on a wall or sideways mount installation.
	Ceiling Mount: This allows you to access preset fisheye features based on a ceiling or straight mount installation.
	Ground Mount: This allows you to access preset fisheye features based on a ground position mount installation.

Note: Different installation modes will provide different dewarping functions. For more information on the dewarping functions provided with each installation mode, please refer to Dewarping Features Explained.

Step 3: Hover your mouse over Fisheye View and select a dewarping option from the provided list of icons.

Dewarping Features Explained

Wall Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a full, square image, of the live feed. The live feed can be controlled with the mouse in an up and down motion.
	Provides a four-layered, square image of the live feed. The live feed can be controlled using the control center in the first quadrant of the live view screen. Each layer is depicted with different colors: First Quadrant (Control): Red, Second Quadrant: Neon Green, Third Quadrant: Blue, Fourth Quadrant.
	Provides a four-layered, square image of the live feed with a central control center. Hover the mouse over the center to populate the control center. Each layer is depicted with different colors: First Quadrant: Neon Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ceiling Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

Ground Mount

	Provides the user to view a full spectrum live feed of the camera without dewrapping features enabled.
	Provides a 360°expanded panorama of the live feed as well as an independent sub-image on the top. The 360° panorama supports zoom and left and right scanning. All movements are controlled by the top sub-image.
	Provides two inverted live view images on both the top and bottom feed. Use the mouse to adjust and move the feed in a left or right simultaneously.
	Provides a 360°panorama view based on two independent left and right sub images. The sub images support zoom and 360° left and right pan. Hover the mouse over the bottom center to display a panoramic viewing option.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors. First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a four-layered view of the live feed. Each quadrant is centrally controlled via a control center and depicted with different colors: First Quadrant: Green, Second Quadrant: Blue, Third Quadrant: Yellow, Fourth Quadrant: Purple.
	Provides a six-layered view of the live feed with one sub-image. The sub-image is used to control the corresponding layered views. Each view is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red.
	Provides an eight-layered image view of the live feed with one central control center. Each layer can be moved in the layer or via the control center and is depicted with different colors: Feed 1: Neon Green, Feed 2: Blue, Feed 3: Yellow, Feed 4: Purple, Feed 5: Turquoise, Feed 6: Red, Feed 7: Orange, Feed 8: Green.
	Drag the image in upper/lower/left/right direction. Press I to display the panorama and press O to resume the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Display the feed in 360° circularity. Use your mouse to drag the image in an upper/lower/left/right direction. Press I to display the panorama and press O to return to the original size. Press S to rotate the image in a counterclockwise direction and press E to stop the rotation. Scroll the mouse wheel to zoom the image.
	Use your mouse to drag the image in upper/lower/left/right direction. Press I to display the panorama, and press O to return to the original size.

.

How To Download Recordings Using Amcrest Orion Surveillance Software

Recordings in the playback menu can be downloaded (exported) using the Amcrest Orion Surveillance software. To download the free software click here.

For more information on how to add a device into Amcrest Orion Surveillance software click here.

Downloading a Recording

Step 1: Open the Amcrest Orion surveillance software and select Download Center.

Step 2: Select the device in the Resources menu and click the calendar option in the Time menu. Select a date and time range of the recordings. Click OK.

Step 3: Click Search. Recordings can be accessed in a timeline or file format. If downloading from a timeline range, select a start and end time in the timeline, enter the software user password and click OK. Verify the start and end time of the recording and click OK. The recording will begin to download.

Step 4: Click the Downloaded tab to view and locate the storage path of the recording. Click the  icon to locate the downloaded recording on your computer.

Note: If downloading multiple recordings, it is recommended to use the File menu. Select all recordings you want to download and select Download Selected File. To download a single file, click the Operation icon.

How to Customize Video Settings Using Amcrest Orion Surveillance Software

If you are having issues customizing the video settings for your device in the app then you can use Amcrest Orion Surveillance software to adjust these settings. This is free software provided by Amcrest and can be used as a one-stop surveillance source for all your Amcrest devices. To download the free software, click here.

For more information on how to customize the video settings, please refer to the information provided below.

Step 1: Open the Amcrest Orion software and select the settings  icon. Select Device.

Step 2: Select Device Config, select the device, and click Parameter Setting.

Step 3: Use the video settings options provided in the camera properties menu to customize the video settings. Click Apply.

Note: If you would like the video settings to apply to the device’s web UI, click Link to Device Webpage

How To Setup Recording Schedules In The Amcrest Orion Surveillance Software

The Amcrest Orion Surveillance software allows you the opportunity to set your added device to record on motion or on the continuous (general) recording schedules. The software uses a recording plan template to set recording schedules. For more information on how to set up recording schedules, please refer to the information provided below.

Click on the  icon located in the Home menu and select Storage Plan.

Setting a Recording Plan

A general recording plan will allow the software and selected devices to record 24/7.

Ensure the option is enabled and click the Recording Time dropdown menu. The schedule will be set to record 24/7, all days of the week, however, can be set to recording during the week or only on the weekends. However, a custom Time Template can be used if needed.

Enter a name for the custom time template and click the period settings (  )option. A total of 6 periods can be set if needed by clicking the “+” icon. Enter a start and end time for the schedule. For instance, in this example we will set it to only recording from 6am (0600) – 4pm (1600). Select which days the schedule will apply and click OK.

The schedule will now be set in the software. Click OK.

Select the newly created recording schedule template from the Recording Time menu. In the Recording Channel, select the devices you would like the schedules to apply. Click OK.

The storage plan will be will now be applied to the selected devices.

The same concept can be applied to motion detection recording plans as well if needed.

How To Set an Email Server In Amcrest Orion Surveillance Software

Email Setup will be dependent on your specific email provider. In this example, we will be using Gmail. A email server can be used to send email notifications or during password recovery. For more information on how to setup an email server, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software, select the  option, and select System Parameters.

Step 2: Select Email Server and enable the option.

Step 3: Select the email provider from the SMTP Server Type dropdown menu and enter all requested information into the interface. Please note, the password should be your Gmail generated app password. **Please refer to Allow Less Secure Apps (Updated) section for more details.

Allowing Less Secure Apps (Updated)

As of May 30th, 2022, Google will be removing the allow less secure apps option, this means a generated password will need to be entered that will allow email alerts to come through on your account. Before proceeding, please ensure 2 factor authentication is enabled in your account settings. For more information on how to do this, please refer to the information provided below.

1.) In Gmail, click the account avatar/icon picture located in the upper right of the window.
2.) Now click the blue button that says “Manage Your Google Account”

Once on the account setting page please click “Security”

3) Click onApp passwords

4) Enter your email password, and click Next.
5) Select an option from the provided drop down menus and select Custom. Enter a name for the authentication and click Generate.

6) Google will provide a security password which must be entered into the device’s Email Setup interface in the device’s web UI.

Step 4: Click Test Email. Once confirmed, click Save.

How To Setup Views and Tours Using Amcrest Orion Surveillance Software

How To Create a View

When creating a tour it is highly recommended to create a view first before creating the tour. A view is a collection of cameras/channels shown in a window. This can be a collection of devices from the same DVR/NVR or a collection from different devices in a single view. For efficiency purposes, it is recommended to keep cameras from the same NVR in the same view. Conversely, this is not mandatory and each view can be customized based on your needs.

Step 1: Log into the Amcrest Orion Software and select Monitoring Center.

Note: Views can be customized to a range of a single camera to 64 cameras simultaneously. Please keep in mind the more cameras that are opened the more network resources are being used. Our recommendation is to set a max of 9 camera views or less but in our example, we will use a wide variety to show the flexibility of the feature.

Step 2: Select each device from the device list and click the save icon (  ). Enter a name for the View and click OK.

Note: If you are using a DVR/NVR with multiple channels, it is necessary to expand the device to show the individual channels associated with your device.

If you are performing this procedure on multiple computers, the process will need to be performed on each desktop/laptop. For this reason, we recommend renaming the cameras in a way to know which cameras/channels go together.

Step 3: Select View. Select the dropdown option next to the View folder. Select the newly created view to load the live feed of the cameras in the interface.

Tour Setup

When you have finished creating the view you can now start configuring a tour. A tour will allow the software to shift between multiple PTZ presets set by the user in the software. If using a PTZ camera, please navigate to Add Device menu and select the edit icon (  ) for the device. Select Video Channel  and ensure the Camera Type is set to PTZ Camera. Click OK.

Note: At least 2 presets must be set to configure a tour.

Step 1: Access the Monitoring Center, select the device, access the PTZ menu, and select the down arrow.

Step 2: Use the PTZ option to rotate the camera to a specific point. Click the Edit (  ) icon and name the tour. Click the checkmark (  ) when finished.

Note: Click the Go icon (  ) to call a preset. The camera will rotate to a related position.

Step 3: Once the presets are created, click the  icon and select the Edit (  )icon.

Step 4: Enter a name for the tour and click the add (  ) icon. Select all applicable presets related to the tour and click OK.

Note: Click the play (  ) icon to run the tour.

Step 5: Navigate to the Resources menu, right click on the device to set a tour duration.

Note: To stop the tour, click on the stop (  ) icon in the Tour (  )menu.

How to Recover a Forgotten Admin Password on Amcrest Orion Surveillance Software

If you have forgotten the admin password to log into the Amcrest Orion Surveillance software, the password can be recovered using the Forgotten Password option. This option can be found on the login screen once the software has been opened. For more information on how to retrieve your forgotten password, please refer to the information provided below.

Step 1: Open the Amcrest Orion Surveillance software and click Forgotten Password.

Step 2: Verify the account’s username and click Next Step.

Step 3: The password can be reset using security questions or through email verification. Please note, the password cannot be reset if there is no email server established. Once the security questions or answered, click Next Step.

Step 4: Enter the new password into the provided fields, click Next Step.

Step 5: Click Log In Now.

Note: Enter the new password and click Log In to open the software. Select Remember Password or Auto Login to allow the software to open on your machine without having to reenter it.

How To View Events Using The Playback Feature In Amcrest Orion

The monitoring center allows the user to view both the live view and playback of a connected device. The monitoring center can be found on the Home menu of the software. The playback option allows the user to view motion, human, or vehicle detection events retained on the device.

Step 1: Click on the Playback option and select your device. Double click to load the initial recording in the timeline.

Note: Use the timeline to manually scroll through the events of the day. The calendar option can be used to choose different dates and times of the events.

To view filter and view specific record types, such as human/vehicle events, click the filter icon (  )

.

Herospeed Firmware Software Download

.

NVR

The Network Video Recoder support network video access,and it has adopted a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),embedded system technology,storage technology, network technology and intelligent technologies.It can work independently as NVR,or as a powerful security networking system.

.

.

NOVATEK IP Camera

The NT IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom.

NOVATEK IP Camera

.

Rockchip IP Camera

The RK IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ,HDR, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Rockchip IP Camera

Fullhan IP Camera

The Fullhan High-definition network camera has adopted embedded system and a number of advanced IT technologies,which integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Fullhan IP Camera

.

GK IP Camera

GK IP Camera uses an embedded system and a number of advanced IT technologies, such as audio and video encoding and decoding technologies (h.264, h.265, h.265+, H264+), integrated encoding and compression, supporting audio noise reduction, and response cancellation, Support humanoid detection, support full Netcom function, can realize plug-and-play access to the back-end.

.

GK IP Camera

.

XVR

The Embedded Hybrid Digital Video Recorder is compatible with HDTVI,AHD and other coaxial HD specification,which can be accessed to any HDTVI,CVI,AHD,analog and network signal.It can disable numbers of analog channels and convert them to IP channels,which have both functions of DVR and NVR.

.

XVR

.

PC Client

VMS is an application platform software that can be used with embedded network monitoring equipment.It supports monitoring equipment by Onvif network protocol, integrated preview, video, playback, backup, PTZ control, alarm management and other functions,to provide flexible and diverse deployment programs, can be widely used in finance, public security, military, transportation, education and other fields of security projects.

.

PC Client

Wifi kits

The wifi nvr kits developed from 100W to 400W HD quality,and adopted audio/video codec technology,embedded system technology,storage technology,network technology,etc.It matches to wireless wifi,WIFI connection supports 2.4G and 5.8G band,plug and play.It is suitable for various scenes,which can connect several cameras to realize omnidirectional  non-dead angle monitoring

Wifi kits

.

SigmaStar IP Camera

The SigmaStar IP Camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control

.

SigmaStar IP Camera

.

Hisilicon IP Camera

The Hisilicon High-definition network camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

.

Hisilicon IP Camera