DVRCMS.Com

How to install and use Camera Live V1

admin — Thu, 11 Jul 2024 09:16:54 +0000

How to install and use Camera Live V1, Camera Live is a free program for you Windows PC or Mac that can be used to locate its local IP address and to view the camera’s live feed locally and remotely. First download the appropriate installation file from the links below and install the program.

How to install and use Camera Live on a compatible Windows or Mac PC/laptop

Camera Live is a free program for you Windows PC or Mac that can be used to locate its local IP address and to view the camera’s live feed locally and remotely.

First download the appropriate installation file from the links below and install the program.

For a Windows PC click here

For a Mac click here

Once you have installed the program, open it and click on Add Video. Then click on Discover to find the cameras UID, or enter it manually ensuring it is correct and all in uppercase. Enter the cameras password ensuring this is correct and in the correct case. Then give the camera a name e.g. garden, drive etc. and click on OK.

Once added wait for the camera to connect to the program. When it is connected you will see a green icon next to the UID, you can then view your camera’s live feed by clicking on the play icon. You will see the “No Video” message until you have viewed the live feed for the first time and the program can produce a thumbnail image from this.

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username: admin
Password: admin

We recommend trying these first to see if they allow you to login.

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access.

NB: When you reset a camera it will reset it to factory defaults (and will lose the WiFi details you currently have set) so you should only perform a reset while your camera is connected to your router with an ethernet cable.

To do this can you:

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.

For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paperclip or similar.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new.

To do this take a look at the setup guides in the section below.

Having touble setting up your camera to record to SD card/NVR/NAS drive.

Are you looking to setup recording? If so please see the links below for full setup guides for each recording method. If you have already set it up but have encountered an issue it may be worthwile running through the setup once more, to check for any errors or mistakes.

SD card recording

UCAM NVR recording

NAS Drive recording

If you are still seeing an error or it is not working as expected please take a look at the common issues and their solutions in the list below.

SD card not supported or faulty.

Motion detection page not configured correctly

NAS details not entered accurately.

NVR IP address may have changed.

Incorrect Task Management setup

How can I transfer video clips from an SD card in the camera to my computer?

If you are looking to transfer recordings from an SD card installed in the camera to you computer over WiFi this is limited to one file at a time for practical reasons:

1) If your SD card had, for example, 128GB of clips it would not only be very cumbersome to transfer that quantity to your computer over your local WiFi but potentially slow down your local network too. As SD cards have very limited file speeds transferring this magnitude of data may also take a very long time to offload.

2) It is also impractical or unwise to transfer en masse as it would also cause a slow down of the camera’s capabilities for the time while the transfer is progressing, and your camera could miss key motion events from being recorded.

Solutions? There are a number of options available to you:

– You can browse the recordings stored on your camera directly from a web browser and check which recordings are important to keep. You can play back the clips in your browser without needing to download to your computer first. Click here for a guide on how to do this.

– You can set the sd card to auto overwrite so that it automatically deletes the oldest recordings when the card is full, so you don’t have manually delete.

– You can use a number of tasks in the camera to automatically offload clips from the sd card (before they get overwritten) to Dropbox, your own FTP server, etc.

– If you really must download everything off the SD card the easiest and quickest way is to take the sd card out and insert directly into your computer (if it supports SD media) and then simply drag and drop the files off the card to your computer.

These are but a few suggestions. If you need further advice on the full range of recording and playback options do get in touch with our Support Team and they will be delighted to help.

Cannot connect to the camera remotely using the app.

Are you having trouble connecting to the camera using the app on your phone? This may be a p2p error. The camera and app use p2p to connect, if the camera is unable to connect to the p2p server then it will not be viewable via the app. Click here to check and resolve this.

Has the camera been set to a static IP? We do not recommend setting the camera to a static IP as this is not usually required and can render the camera inaccessible if setup incorrectly. Click here to check this has been setup correctly.

Is the UID correct and all in uppercase? If any character in the cameras UID is not in uppercase it will not be able to connect to the app remotely. If this is the case, delete the camera from the app and add it again. For help with this click here for an Android device and click here for an iOS device.

Changed WiFi router or given a new router by your ISP?

If for some reason you have changed/updated your WiFi router your camera(s) will need to be reset to factory defaults and setup again, since the WiFi details and ip addressing on your camera(s) will still be that of your old router.

To reset your camera(s) and start afresh please click here.

NB: Be sure to read and follow the reset instructions carefully to avoid any problems or delay in setup.

Once reset you will need to setup the WiFi connection again. Please follow one of the guides below to complete this.

PC Method

App Method

WPS Method, for WPS enabled routers.

Power LED flashing rapidly and camera offline?

A rapidly flashing green power LED usually indicates that the camera’s firmware has encountered an error. This is rare but can occasionally happen after an unexpected power cut (if the camera is in the middle of performing a task), due to incorrect settings in the camera (too many enabled tasks, conflicting settings etc.), or due to a faulty SD card.

This can usually be resolved with a reset of the camera. To do this first power down the camera and leave it for at least 10-15 minutes, then follow the steps on the page linked below to reset the camera. Note: a reset will clear all changed settings in the camera and revert it back to the defaults.

How to reset the camera

If the reset does not clear the error then you should get in touch with our support team using the “contact us” form as they will be able to advise on the next steps to resolve the issue.

How to install and use Camera Live V1

How to reset a camera.

If you think you need to reset your camera we recommend you first get in touch with us using the “Contact us” form as a reset may not solve your issue and will wipe the camera of any user data, meaning you will need to set the camera up again.

But should you want to reset your camera anyway please use either of the guides below.

There are two ways to reset the camera: physically by pressing the hardware reset button or digitally via the camera’s web interface….

Physical reset procedure

5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.
8) Locate the camera’s reset button or recess.
For the outdoor camera this will be a button on the underneath of the camera or on the end of a cable.
For the indoor camera this will be a recess on the back of the camera that can be pressed with a paper-clip or similar.
9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is “admin”

Digital reset procedure

1) Remove all cables connected to the camera.
2) Remove any SD card from the camera.
3) Wait 10 mins.
4) Connect the Ethernet cable to the camera and your router, you should hear a click when the cable is connected.
5) Wait 2 mins.
6) Connect the power cable to the camera.
7) Wait 5 mins for the camera to power up.

8) log in to the camera interface on a PC, see the guide here on how to do this.

9) Go to Setting, Tools, Backup or Reset.
10) Click on Reset, then when it appears click on Reboot.
10) Wait 5 mins for the camera to power up fully, ensuring it remains connected to your router with the Ethernet cable throughout.

Then once the camera is reset can you log in to the camera interface using the default username and password which is admin (in lower case) for both.

As the camera has been reset it will be at the factory defaults once again, so you will need to setup your camera again with the WiFi details, etc. as if from new. You’ll find the details here: http://ucam247.helpsite.io/categories/3646-camera-setup

Forgotten your password or getting a wrong password message?

If a password has been forgotten unfortunately there is no way to recover these as this would compromise the camera security.

The default username and password for the camera will be “admin” e.g.:

Username: admin
Password: admin

We recommend trying these first to see if they allow you to login.

These must be entered all in lowercase and should be double checked as some devices such as iPhones/iPads will set the first letter to uppercase automatically.

When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces.

If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access.

9) Press and hold for 20 seconds and release.
10) Wait 5 mins for the camera to reset ensuring it remains connected to your router with the ethernet cable throughout.

To do this take a look at the setup guides in the section below.

Camera is rebooting often

Do you find the camera does not remain online for any length of time? If so this is usually a setup or a hardware error, typically with the SD card or the recording setup. Please take a look at the troubleshooting guides below to help resolve your issues.

SD card not working.

Too many tasks enabled.

Issues with power supply, outdoor cameras.

Cannot view the video from the app.

If you are having trouble viewing video in the app it is likely due to one of the issues listed below.

Poor Wifi connectivity

p2p disabled

Privacy mode enabled blocking access to the live feed.

Live feed or playback is jerky and not smooth

The first thing to check will be that the camera has a strong WiFi connection. This can be checked in the app by going to Edit Camera, Advanced Setting, WiFi Setting and should be at least 50-60%. A poor WiFi signal can cause the playback of the live feed to be poor. Click here for advice if the WiFi signal strength is poor.

If the WiFi connection is strong, the next thing to check will be that the stream setup is set appropriately for your network. The defaults for this are below and can be found by logging in to the camera’s web interface and going to Setting, Camera, Stream Setup.

The H.264 bitrate should be left at the default of 1536, raising this can cause the camera to send more data than your router can cope with causing a jerky live stream.

The MJPEG stream should not be set higher than the default of 50. This is an uncompressed stream that is used for the cameras motion detection, not for recording or streaming, raising this can cause issues with the streaming as it puts a high load on the camera.

You should also check that you do not have too many tasks enabled, conflicting tasks can cause issues with the camera’s ability to stream well. You should only have one of task 7, 8, 9 or 10 enabled at any one time. For more information on setting up the task management page click here.

NVR IP address keeps changing.

You have setup and NVR with a camera successfully however it stops recording after a short time.

This may be due to your router assigning the NVR a new IP address very often. In this case the best way to prevent this from changing and your details in the Storage Setup page becoming incorrect is by setting the NVR to a static IP address.

To do this please take a look at our setup guide for Setting the NVR to a Static IP address.

Having Trouble With WiFi setup?

Does your WiFi use older WEP Encryption? If so click here

Not getting a wireless connection where you have placed your camera? Click Here for more information.

TDSEE App User Guide

admin — Wed, 15 Nov 2023 12:20:16 +0000

TDSEE is a super easy-to-use application for smart monitoring. It integrates various features, such as video monitoring, smart tracking, alarm notification, two-way audio, video playback, and so on. Together with the managed smart devices , it can be widely used in homes, enterprises, shops, machine rooms, and warehouses, meeting users’ demand for remote video monitoring.

If you already have the TDSEE App, please Login.

If you have NOT got one, scan the following QR code, or search for TDSEE in Google Play or App Store, download and install it onto your smartphone/tablet

TDSEE

Login

Ensure that your smart device used for setup, such as a smartphone, can access the internet.

If you already have a registered account Step 1 Open the TDSEE App.

Step 2 Enter the registered mobile phone number or Email address and password, and tap Login .

—-End

If you DO NOT have a registered account Step 1 Open the TDSEE App. Tap Register.

Step 2 Choose the region where you are. Then enter your email address, and tap Get Verification Code .

Step 3 Enter the Verification Code.

If you do not receive activation code:

–Please check your spam box.

–Check if you enter the correct email address.

–Enter another email address.

Step 4 Set the login password, and tap OK .

—-End

Add the camera to TDSEE App

Before adding the camera, please ensure that the router is connected to the internet successfully and the filter function is disabled.

Method 1: Add a camera through QR code

Step 1 Power on the camera.

The LED indicator lights solid red after the camera is powered on. When the LED indicator blinks blue quickly, the camera is waiting to connect to a 2.4 GHz Wi-Fi network.

Assume that the Wi-Fi name and Wi-Fi password of the router are:

− Wi-Fi name: Tenda_123456

− Wi-Fi password: UmXmL9UK

Step 2 Add the camera to TDSEE App.

1Open the TDSEE App. Enter the home page, tap Add a device or in the upper right corner of the home page.

2Scan the QR code on the bottom of the camera.

If a prompt pop up asking for access to the camera of your smartphone, please allow it.

3Confirm and tick The indicator is blinking blue fast, or I have heard the prompt tone, and tap Next .

4Tap to go to Settings > WLAN of your smartphone. Then connect to the 2.4 GHz Wi-Fi network of the router, which is Tenda_123456 in this example.

5Return to the TDSEE App, enter the Wi-Fi password, and tap Next .

If a prompt pop up asking for access to the location information of your smartphone, please allow it.

6Align the lens of the camera with the QR code for scanning from 15 to 25 cm.

–Try moving the smartphone back and forth to adjust the distance between the screen of the smartphone and the camera, and keep each position for about two seconds.

–Ensure that the camera lens has no shade or blemishes. Remove the protective film (if any) and try again.

–Ensure that the smartphone screen is clear, no crack and no reflections.

7When you hear a prompt tone Connecting Wi-Fi. Please wait, tap I have heard the prompt tone , then the TDSEE App is adding the device…

8Wait a moment, and the camera is added successfully. You can name your camera, which is Home in this example. Tap OK .

—-End

Method 2: Add a camera through hotspot

Step 1 Power on the camera.

The LED indicator lights solid red after the camera is powered on. When the LED indicator blinks blue quickly, the camera is waiting to connect to a 2.4 GHz Wi-Fi network.

Assume that the Wi-Fi name and Wi-Fi password of the router are:

− Wi-Fi name: Tenda_123456

− Wi-Fi password: UmXmL9UK

Power on the camera

Step 2 Add the camera to TDSEE App.

1Open the TDSEE App. Enter the home page, tap Add a device or in the upper right corner of the home page.

2Scan the QR code on the bottom of the camera.

If a prompt pop up asking for access to the camera of your smartphone, please allow it.

3Tap Others in the upper right corner, then select AP Config. Confirm and tick The indicator is blinking blue fast, or I have heard the prompt tone, and tap

Next .

4Tap to go to Settings > WLAN of your smartphone. Then connect to the 2.4 GHz Wi-Fi network of the router, which is Tenda_123456 in this example.

5Return to the TDSEE App, then enter the Wi-Fi password, and tap Next .

If a prompt pop up asking for access to the location information of your smartphone, please allow it.

6Tap Next .

7Connect to the default SSID (Wi-Fi name) of the camera.

The SSID is TendaIPC_XXXXXX, XXXXXX indicates the last six characters of its UUID which can be found on the bottom of the device.

8Return to TDSEE App, then tap Next . The TDSEE App is adding the device….

9Wait a moment, the camera is added successfully. You can name your camera, which is Home in this example, and tap OK .

—-End

Method 3: Add a camera in a wired manner

Assume that the Wi-Fi name and Wi-Fi password of the router are:

− Wi-Fi name: Tenda_123456

− Wi-Fi password: UmXmL9UK

Step 1 Connect to the camera.

1Power on the camera. The LED indicator lights solid red after the camera is powered on. When the LED indicator blinks blue quickly, the camera is waiting to connect to a 2.4 GHz Wi-Fi network.

2Connect the LAN port of the camera to a LAN port of the router using an Ethernet cable.

Step 2 Connect the smartphone to the Wi-Fi network of the router. Which is Tenda_123456 in this example.

Step 3 Add the camera to TDSEE App.

1Open the TDSEE App. Enter the home page, tap Add a device or in the upper right corner of the home page.

2Scan the QR code on the bottom of the camera.

If a prompt pop up asking for access to the camera of your smartphone, please allow it.

TDSEE App User Guide

YI IoT Camera User Manual

admin — Tue, 14 Nov 2023 09:52:29 +0000

YI IoT Camera User Manual, This article contains all the contents of YI IoT, multiple ways to add, settings of YI IoT camera functions, how to use the computer, and will be continuously updated.Before you start you need to download YI IoT APP and register your account.

Applicable to: Cameras with YI IoT APP or any other brand cameras using YI IoT. YI IoT Light bulb camera is also applicable to this guide

YI IoT and YI Home are different apps, if you are looking for a guide to YI Home, check out: How To SetUp YI Home or Kami Camera

YI IoT Camera APP download

YI IoT supports Android and iPhone, you can download it from google play or app store.

Register your account and login

YI IoT only supports email registration, or you can sign in with Facebook.

Connect YI IOT Camera

Connect power

Before add YI IoT camera, please connect YI IoT camera to the power supply first.

After the device is successfully started, wait for about 20s, and you can start scanning when you hear a beeping sound.

Add camera

There are 3 ways to add a YI IoT camera, we recommend using ‘WiFi connection’ to add a YI IoT camera.

Click the ‘+’ icon, then click ‘Scan code binbing’, scan the QR code on YI IoT camera, the APP will show the recommended way to add.

Follow the instructions on the APP to add a YI IoT camera.

Can’t find the QR code on the YI IoT camera? You don’t need to scan the QR code, you can add the camera manually.

Add camera: WiFi connection

1. Select WiFi connection, make sure YI IoT camera is beeping, click ‘l heard the beep‘ > Next.

Drop drop sound

Note: Only when YI IoT camera beeps ‘drop-drop’, you can add YI IoT camera, no beep please reset YI IoT camera.

2. Enter your WiFi password, then click next.

If the app does not show your wifi, please make sure your phone is connected to wifi.

3. The app shows the QR code to YI IoT camera to scan, phone is 4-8 inches away from the camera, camera will issue a voice prompt for a successful scan.

After the camera issued voice prompts click “I heard Waiting to connect“, then enter the next step

YI IoT camera scan to QR code

You can turn on ‘try sonic binding’, to improve the connection success rate.

4. Wait for YI IoT camera to connect to wifi, set the camera name after successful connection.
The new YI IoT camera comes with free cloud storage, or click ‘<‘ to cancel.

Add camera: Hotspot config to wifi

1. Select ‘Hotspot config to wifi‘,make sure YI IoT camera is beeping, click ‘l heard the beep‘ > Next.

See also YI IoT Light Bulb Camera Review and SetUp

Drop drop sound

Note: Only when YI IoT camera beeps ‘drop-drop’, you can add the camera, no beep please reset the camera.

2. Enter your wifi password, then connect the phone WiFi to the network with”CAM_ “the default password is: 12345678 and return to the APP

3.Back to YI IoT APP, wait for YI IoT camera to connect to wifi, set the camera name after successful connection.

How to use YI IoT Camera without Internet？

If you don’t have wifi, or use YI IoT camera without internet, you can use Hotspot direct connect.

But you can’t watch YI IoT camera remotely, you can’t receive alarm notifications, you can only use the simplest functions.

1. Select Hotspot direct connect, then connect the phone WiFi to the network with”CAM_ “the default password is: 12345678 and return to the APP

2. Go back to the app, click on to connect, and now you can use the camera.

Note: This mode can only be used if you connect to the camera’s hotspot wifi.

YI IoT Important Function Settings

Share the camera

Sharing the camera allows multiple phones to use the camera.

1. Click on the share icon > Share cameras with your family,You can choose QR Code or YI loT account to share.

Note: The other party needs to have a YI IoT account to add a camera.

QR Code Share

1. Select QR Code, Select the permissions available to share, and then tap Share.

2. Ask invitee to open the app and press the account icon in the lower right corner of the page.

Press the QR Code icon in the upper right corner and have your friend scan.

YI loT account Share

1. Select YI IoT account, select shareable permissions, enter the invitee’s YI IoT email address, and click Share.

2. YI IoT APP will send a notification to your invitee. Your invitee needs to confirm invitation in the App.

Recording Settings

The camera will only be displayed when the SD card is inserted SD card recording settings, inserting the SD card will, the camera will restart.

By default, the camera is activated with Event recordi, after activating motion detection, the camera will automatically record when it detects motion.

You can set the recording mode in SD card recording.

All time recording: The camera will record all the time and will not stop.
Event recording: Only record when an alarm event is detected

All-day Recording: 24-hour operation
Custom: You can set the time to start recording, (up to 3)

View Camera Recording

Click on the Activity to enter the interface, ‘‘ is the cloud storage video, ‘‘ is the SD card video.

The blue time indicates the time when there is video recording.

Motion Detection Settings

After turning on motion detection, the camera detects motion and the app will push an alarm notification.
The motion detection recording is set in the SD card recording.

You can set the detection sensitivity and notification frequency in Smart Detection, and you can also activate the alarm sound.

Motion Detection: Motion detection switch
Sensitivity Level – High：The camera will generate an alert and video when detecting the object slightly shaking.

Sensitivity Level – Medium：The camera will generate an alert and video when detecting the object moving at an moderate.

Sensitivity Level – LOW：The camera will generate an alert and video when detecting the object moving significantly.

Alert Frequency: Low – 10 minute，Medium – 5 minute， High – 1 minute
Schedule: Set alarm notification working time

Camera alarm sound: When activated, the camera will sound an alarm when it detects motion.

Motion tracking Settings

Motion tracking is activated in Camera Settings.
Motion tracking allows you to track moving objects, and the camera will follow the movement of the object.

YI IoT Light bulb camera Setup

YI IoT Light bulb camera has the same function as a normal camera, the main feature is that it can be mounted on a light stand.
If your YI IoT camera supports Light, you can see the ‘‘ icon in the live screen. By clicking the ‘‘ icon, you can select the Light working mode.

Auto: When in night vision mode, the camera detects the movement of objects, the camera will start Light.

Manual switch: You can choose Open or Close to switch the Light manually.

YI IoT APP Interface Description

1. Watch 4 cameras at the same time 2. Add cameras

3. switch camera display 4. Share cameras

5. Cloud storage 6. Camera settings 7. alarm information

8. alarm information 9. cloud storage

10. personal information 11.Cloud Storage

12. Flip video screen 13. camera settings

14. save the video on the phone 15. voice intercom

16. sound switch 17. Screenshot

18. Full screen zoom 19. alarm message

20. view camera video 22. Control camera movement

Video Tutorials

YI IoT For PC

YI IoT supports Windows computers, and you can download the software here.

How To Add YI IoT Camera To Your Computer?

If you have added a camera to the YI IoT APP, you can use the camera on your computer by simply logging into your account.

1. Login to software, no account please register first.

2. Click ‘+’ , make sure your camera is beeping, click ‘I heard “Waiting to connect”‘.

Note: Only when the camera beeps ‘drop-drop’, you can add the camera, no beep please reset the camera.

3. Enter your wifi name and password, then click Please choose Wi-Fi

Note: The name and password are case-sensitive

4. Let the camera scan the QR code, If you hear “QR Code scan is successful”, please click Next.

5. Wait for the camera to connect to the wifi, click Save after successful connection.

7. Double-click the camera to watch the video.

YI IoT For PC Interface Description

1.Enlarge the video

2.alarm message

3.camera settings

4.downloaded cloud storage video

5.BUG FEEDBACK

6.set save folder

7.add camera

8.camera

9.cloud storage video

10.memory card video

11.camera switch

12.Pause video

13.control camera movement

14.switch resolution

15.Sound switch

16.full-screen viewing

Why add YI IoT camera failed？

Please check the following issues, then reset the camera and add it again.

1.Ensure camera is powered up and waiting for networking;

2.Ensure camera has successfully identified the QR code and heard “QR code scanned successfully”,

3.Ensure Wi-Fi name and password are correct;

4.Try to restart the router or modem and make sure the camera is as close to the router as possible;

5.Check if Wi-Fi is 2.4G (some cameras support 5G)

I heard “wifi connection failed” or “wifi password error”

Weak WiFi signal, please move device or cell phone closer to WiFi router, or try rebooting WiFi router.
Make sure the wifi password is correct

I heard “Pairing has timed out”

Reset the camera and then re-add it.

What to do if I did not hear “QR Code scan is successful”?

1.The plastic cover on the new camera has to be removed and make sure that the lens on an old camera is clean.

2.The QR code cannot be read if the display resolution of your mobile phone is too low, too dark or it is too far from the camera lens.

3.please reset your camera.

How to reset YI IoT camera？

The camera can be reset only after the camera is started, Press and hold the reset button for 5 seconds.

Reset the sound of the YI IoT camera

Can YI IoT Camera connect to YI Home or Kami Home APP?

No, YI IoT can only connect to YI IoT camera.

Why some YI IoT camera features I don’t have?

1.YI IoT camera and APP will be updated all the time, you may be using the old version.

2.Different models of YI IoT camera may have some differences

3.It is recommended to contact your camera seller

YI IOT CAMERA FAQ

Why do YI IoT cameras offline?

YI IoT camera keeps going offline, usually because it can’t connect to wifi.

1. wifi signal is weak, put the YI IoT camera close to the router
2. restart YI IoT camera, the camera will reconnect to wifi
3. Reset the camera and reconnect the YI IoT camera
4. Still keep offline, maybe the wifi module of YI IoT camera is faulty, we suggest contacting your camera seller

Why are YI IoT cameras often offline?

YI IoT cameras are often offline, usually for the following reasons

1. The wifi signal of the location where you put the YI IoT camera is too weak, you can strengthen your wifi signal or put the camera close to the router.
2. Memory card problems cause YI IoT camera offline, you can take out the memory card, and then see if the camera can work properly.
3. The above attempts are not working properly, it is possible that the wifi module of YI IoT camera is faulty, we suggest contacting your camera seller

Why can’t I control the YI IoT camera pan and tilt?

Please make sure your YI IoT camera supports pan and tilt
If you can’t respond to the control button, or can only control part of the pan and tilt, it means the camera is malfunctioning internally, please contact your camera seller

Why do YI IoT cameras often restart automatically?

The automatic reboot may be a problem with the power supply, power cable and memory card.
You can replace them in order to troubleshoot the problem, if it cannot be solved, then it may be a YI IoT camera hardware problem, please contact your camera seller.

I can’t find YI IoT APP in app store and google play?

YI IoT APP was deleted from app store and google play, you need to wait for YI IoT APP to be re-listed.

How can I connect the camera when the QR code on the YI IoT camera is damaged?

The two-dimensional code is not required, you can manually select the mode to connect the YI IoT camera.

Why does the YI IoT camera move in the opposite direction when tracking?

You need to contact your YI IoT camera seller in order to resolve this issue.

1. Ask for a replacement camera
2. You can solve the problem by upgrading the camera firmware, contact your camera seller to push the firmware.

How to solve the glass will reflect the night vision?

YI IoT camera can’t turn off the night vision light manually, so it can’t be solved, please keep the camera away from windows, glass, etc.

Forgot the PIN password of YI IoT camera

PIN password is set by the user,there is no way to retrieve PIN password.
If you forget the password, you can only reset the camera and reconnect the YI IoT camera.
Note: After resetting the camera, you can’t view the previous VIDEO.

What sd card does YI IoT camera support?

YI IoT camera supports Micro SD Card, minimum 8GB, class10 memory card.
We recommend using a SanDisk or Samsung Micro SD Card.

How do I return it?

Please contact your camera seller, camapp365.com does not sell cameras and is not a YI IoT person

Can camapp365.com solve my problem?

There are too many comments for me to reply to every question, but I will check and update the FAQ uniformly.

CamhiPro user manual

admin — Sun, 05 Nov 2023 12:35:33 +0000

CamhiPro user manual, A powerful real-time monitoring security app, so that you care about, become safe, real-time control. You can use it in your home, shop, office, etc., whatever you want to care about, let us be your time Keeper! Time zone Settings and mobile phone time Synchronization video playback in the SD Card take photo for real-time video view the real-time video ptz control..

CamhiPro user manual

How to add CamHi camera to Ispy

1, RTSP to add

1、main stream：rtsp://ip address/11
2、vice stream：rtsp://ip address/12
Find “FFMPEG (H264)” this column, fill in information of RTSP in the URL.After adding can test is successful

Go to “Camera” option.

Input your camera ip address, User name and Password, click “Finish”, add camera succeed.

The difference between camhi and camhipro

The camera can use camhi and camhipro app at the same time, camhipro’s interface design is more modern, except for the interface there is no other difference, the functions are the same

Other functions

Camera list display mode

Click the camera list interface icon to select the camera list in large or small image mode.

Sidebar settings

Click the camera list interface button, or swipe the screen to the right in the camera list interface to enter the APP sidebar. The APP name is displayed on the sidebar. the below displays APP version.

• Local file

Click Local File to enter the local file interface. This interface displays all the local videos and pictures saved by this camera on this phone. Click on the file to playback the video file or view the local picture. Click the Edit button to delete the file.

• More

Click the More button to check whether the APP has obtained the notification permission of the mobile phone. If the display is not enabled, the APP cannot send the alarm push message. Clicking enabled, you can jump to the setting interface to open the notification permission.

Video/Image search and view

Local recording playback and download

Find the camera to be viewed in the camera list interface, click the icon, select the recording page, the recording file will be displayed, you can sort according to the size and length of the video file, click the button, you can save the video file to the mobile phone album. Click the edit button, it can delete the selected video file.

View local snapshot images

Click on the image page in the local file interface, the local snapshot images will be displayed, the images will be sorted according to the capture time, click the preview thumbnail to view the image, click the button, you can delete or save the image to the album.

Remote video playback and download

Remote video playback

Click the button “camera list interface” to enter the remote recording list interface. The APP searches for the last 6 hours of video files by default. You can customize the sorting according to the recording time, click the video file, and then click play to playback the video files in the SD card of the device.

Remote video download

Click on the video file in the recording list interface, and then click Download, the video file will be downloaded automatically. The downloaded video file will be saved in the local recording interface. After the video download is completed, you can click to continue downloading, continue to download other video files, or click view, will jump to the local recording interface automatically.

Remote video search

Click the button on the recording list interface, the search option appears, you can select the recording search range as needed.

Search time range is optional

Function settings

When the camera is online, click the camera list interface or the live interface icon to enter the camera parameter setting interface.

Basic settings

Wifi settings

Display the WIFI network connected to the current device

Click to get the wireless network around the device, the device will search for the WIFI network in the current environment automatically; select the password to configure the WIFI of the current device.

Change password

The access password of the camera can be modified. When ticking display password, the password will be visible.

Alarm settings

Alarm management and notification

• Alarm push

Select On to indicate that a push message will be sent to the phone when alarming.

• Device alarm

1.Motion detection alarm

Select On to indicate that the device has enabled motion detection. Clicking adjust motion detection, it can draw motion detection area and adjust motion detection sensitivity (This function is suitable for some models.)

2.Sound alarm

Select On to indicate that the device with microphone function. When the surrounding sound is greater than the intensity of the device check sound, trigger an alarm, click to adjust the sound alarm, you can adjust the sound alarm sensitivity

Alarm Linkage

1.Alarm capture to SD card

Select On to indicate that the alarm capture picture is saved to the SD card.

• Alarm recording to SD Card

Select On to indicate that the alarm recording file is saved to the SD card.

• When the alarm is triggered, the device issues a siren

Select on to indicate that when alarming the camera will sound an alarm. Siren type and the duration of the siren is optional

Email alarm linkage

Select On to indicate that the device will trigger the alarm and send a picture to the mailbox. Click Configure Email to set the mailbox information.

Send an email to the QQ mailbox as an example:

Smtp server: smtp.qq.com

Port: 465

Secure connection: SSL

Username: QQ number of the outbox

Password: Authorization code of the outbox QQ mailbox

Receiving address: the mailbox that receives the alarm picture

Sender address: sender email address, here is the QQ mailbox as an example, you need to fill in the QQ email address (consistent with the user name). Subjects and content can be filled in casually. After filling out, click the Apply button, then click the Test button to check if you can send an alarm email.

FTP alarm linkage

1.Alarm recording is saved to FTP

Select On to indicate that the alarm recording file is saved to FTP.

2.alarm capture saved to FTP

Select On to indicate that the alarm capture image is saved to FTP.

Click Configure FTP to set FTP information.

Server address: Fill in the erected FTP address

Port: Fill in the FTP port

Username and password: Fill in the username and password set in FTP

After filling in, click the Apply button, then click the Test button to check if you can send an alarm picture to FTP.

Picture capture number setting

You can set the number of alarm capture pictures, 1-3 sheets are optional

This function is suitable for some models.

Audio/Video management

Video settings

• Code rate

Can customize device’s code rate of first code stream and second code stream

• Frame rate

Can customize device’s frame rate of first code stream and second code stream

• Code level

1-6 can be set, the smaller the value, the better the image level, the larger the code stream

• Video system

50Hz and 60Hz optional

Audio settings

• Input volume

Adjust the input volume of the device

• Output volume

Adjust the output volume of the device

SD Card recording and capacity

SD Card plan recording

• Whether to enable recording

Select on, the device will save the recording to SD card

• Recording file time

Can adjust the length of each recording file manually.

• Recording time period

1.Simple settings

Select Simple settings, the recording time period defaults to Monday-Sunday full-day recording.

2.Advanced settings

Select advanced settings to customize the time period for each day of recording manually

Enter the advanced settings interface, click the quick edit button, select the time period to be recorded, you can customize the recording time period; edit it, clicking the Finish button to save the settings.

SD Card settings

Can view the total space and free space of the device SD card, can format SD card

System settings

Device time settings

1、Synchronize device time to phone time

2、The device time zone can be set. After the time zone is set successfully, the device will restart automatically.

Initial settings

• Restart the device

The camera will restart after clicking

• Restore factory settings

The camera will reset after clicking

Device information

Can get the device information of the camera: including device name, device type, Network type, number of user connections, software version, IP address, Subnet mask, gateway, DNS, etc.

Check for updates:

After clicking, the camera will check the firmware version automatically. If there is a new version, it will prompt for updates, click to upgrade online

(This function is suitable for some models)

Function description of live broadcast interface

Ordinary camera interface

The ordinary camera monitoring interface is displayed in the small screen mode by default. The function selection button is displayed at the bottom of the screen. More function keys can be called to slide to the left in the blank space. The function description of the buttons is shown in the figure below.

Note: Some functions require device support

PTZ function:

For devices with PTZ function, use your finger to swipe the live video, the camera will rotate according to the direction of the finger.

Exit the live interface:

Press the blank space and pull down on the small screen interface or click the back button to exit the live interface.

Panoramic camera interface

The panoramic camera will have different live broadcast interfaces depending on the model. It subjects to the connected model. The key function description as following:

Exit the live interface:

Press the back button to exit the live interface

View the camera

After adding the camera for a few seconds, wait for the camera to connect to the camera automatically, prompt the online description to view the camera video, click on the camera that displays online to enter the camera live interface.

Camera status description:

Connecting: At this time, the camera is establishing a connection with the network camera. According to different networks, the connection time is different.

Online: This status indicates that the device is connected properly; click to view the video;

Not connected: This status indicates that the device is offline

Password error: This status indicates that the camera login password is wrong. Clicking on the camera in this state will pop up the Change Password dialog box.

Add camera

Install the APP, connect the mobile phone to the WIFI network, enter the APP and click the Add Device button to enter the Add Device interface. If it is the first time to use or restore the factory settings: the camera is not connected to the network, clicking the new device; the camera that has connected to the network, clicking on the device in use

New device add

After clicking the “New Device” button, power on the device, wait for about 30 seconds, confirm that the device is working, click next.

Connected to Network cable

If the device is connected to the network cable, click the “Connected Network Cable” button, the APP will search for the UID of the device in the current LAN automatically. Selecting the UID to be added and click the Add button, the device will search for the nearby WIFI signal automatically to enter the wireless configuration interface. Enter WIFI password, click “Configure wifi and add”, after WIFI configuration successfully, jump to the device list interface; if you do not want to configure WIFI temporarily, click the “Do not configure, directly add” button, adding camera fter confirmation.

Un-connected to Network cable

If the device is not connected to the network cable, click the “Un-Connected to Network Cable” button to enter the interface for selecting the network type.

Sound wave configuration network support equipment: PTZ Camera, Card type camera, Bulb camera, Small flying saucer camera, etc.

AP configuration network support equipment: Box camera, PTZ Camera, Speed dome camera, Big flying saucer camera, etc.

Sound wave configuration network

When the power is turned on, the device will enter the waiting state, and the device will send out a “beep” sound intermittently. Click Next to scan the QR code of the device UID number with the mobile phone. If there is no QR code, click Skip. Enter the password of the WIFI signal to be configured, click to start the sound wave configuration, the system will configuration WIFI automatically. After WIFI configuration successfully, there is a voice prompt

AP configuration network

When the network cable is not connected, turn on the power, click to add, the APP will search for hotspot signals of nearby cameras automatically. The hotspot format is IPCAM-XXXXXX, the password defaults to 01234567. Selecting the hotspot of the camera to be added, clicks connect. After connecting successfully, enter the device add interface, click Add, enter the wireless configuration interface, enter the router’s WIFI password, click “Configure wifi and add”, after WIFI configuration successfully, jump to the device list interface; if you do not want to configure WIFI, click the button ” Don’t configure, add directly”, add camera after confirmation.

Note: AP configuration network needs to open the phone’s GPS function first.

Add device in use

Scan QR code

Generate a QR code by using the online QR code generation tool, and then scan the QR code through the mobile APP to scan and add.

Search for nearby devices

1、Click the button “Search for nearby devices” to search for the ip camera in the wireless network where the phone is located, and select the corresponding UID.

2、Enter the camera password (the camera default password is admin)

3、Click the button “Add” to add a camera.

Delete camera

In the device list interface, long press the camera to be deleted or click the button “setting” to enter the camera setting interface, click the button “delete device” to delete the added camera.

How to set alarm to send Email

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function. Settings like below.

The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page. When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size. After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:
send alarm and pictures to email
send captured pictures to assigned FTP server
send video recording to assigned FTP server
capture a picture, then save to TF Card
Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)
linkage Preset: after the alarm, call preset
alarm capture quanity, setting as required (1-3 pieces)

If you want set Email alarm, please tick ”E-mail Alarm and Send with Picture”. and then click “Email setting”

3. Setting Email

The items in above picture is mandatory fields need to fill in. If the filled content is not qulified, the setting will not be successful. After writing completed, click Apply firstly, then testing, it will reminder testing successfully when finished.

Note:

1.The server of sending email should support POP3 protocol. In order to strengthen security and reduce spam, Many mail server closed this protocol at present. So users need to check if the server support POP3 before choose mail server, otherwise the mail can not send successfully.

2.For some mail server using SSL certificate, it must enable SSL option, then can send email successfully.

3.Some mailboxes require additional security settings, such as Gmail messages, you need to log in to your google account, open to allow less secure apps in “Sign-in & security” page.

If your Gmail mailbox opened “2-Step Verification”, then you need to set up a separate “app passwords” for camera login,

How to set up “app password” you can click on the “Learn more” to get help

If you do not know the security settings of other mailboxes, we recommended use Gmail.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

How to set alarm to upload pictures and video to the FTP server

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function.

Settings like below. The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page.

When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size.

After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:

send alarm and pictures to email

send captured pictures to assigned FTP server

send video recording to assigned FTP server

capture a picture, then save to TF Card

Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)

linkage Preset: after the alarm, call preset

alarm capture quanity, setting as required (1-3 pieces)

If you want set alarm to upload pictures and video to the FTP server, please tick ”Save Picture on the FTP Server” and ”Save Video on the FTP Server”. and then click “Email setting”

3. Setting FTP Server

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

Timing capture and timing record of SD card

1.Timing capture

Choosing “save image to SD Card” or “save images to FTP server”, at a regular interval (can be set like above picture), the device will capture images saving to SD Card.

Click “FTP” into set FTP

2. Timing record

Video file duration: can set video file duration, default is 600 seconds.

Open video: can choose whether open video to TF Card

Stream: can set recording stream

recording time: set timing recording time as required

then confirm the camera support SD card and insert SD card, as shown in below picture:

How to view pictures card and download video of SD

Click “SD card” button in IE home page of camera.

Page will display the date of picture and video, select date.

Images folder to store pictures, record folder store videos.

Open images folder, click the images file name directly view picture.

Open record folder, click the record file name to download video.

CAMHI IP Camera Port mapping setting method

1.Please setup the IP address to be Static IP address.

2.Please modify HTTP port number.

The device HTTP port mapping to the external network router,
“External ports”: This port is corresponding to the access requirement of outside network
“Internal Port”: port for this equipment
“Service agreement” selects “ALL”
“IP address”: LAN IP address of the camera.

NOTE:
If your router supports UPNP function, you can also use UPNP port mapping automatically.
UPNP stands for universal plug and play, if you started UPNP, once the IP camera was connected into the LAN, it will communicate with the router of the LAN.
It will request the router to open a port to forward its own port. User doesn’t need to log in the router to set the port forwarding.

users in the use of the function, need to confirm a router also is enabled UPNP; Because many router model, not necessarily can very good support UPNP, testing and supporting the router is very good with, or suggest not start the function. At present test and TP-LINK router cooperate good.

Wansview PC setup guide

admin — Sun, 14 May 2023 08:47:45 +0000

Wansview PC setup guide, Wansview is devoted to becoming the world’s leading provider of security and smart home products and service Established in 2009, Wansview has been devoted to product design, development technology innovation, professional manufacturing process etc.

Wansview For PC

Support for windows and mac os computer systems

Wansview camera Search Tools

Search for Wansview cameras on the same LAN

How to use Wansview PC Client

Read Next :

UNV Mobile App EZView Guide

XMEYE PC CMS Full Guide

Dahua Config Tool Operating Instructions

Add Camera

Add camera in Lan

1) Tap to add camera

2) Search the camera in Lan, DID number will be searched if use DID(P2P) to search, while Search IP will get IP Address

3) Double-click the searched camera, and the camera information will be filled automatically.

4) Input the camera’s password (default is 123456).

5) Hit “Add”.

6) “Save Success” will appear, click “OK” to close the dialog.

Wansview PC setup guide 517

1.2 Manually add camera (suitable for outside network)

Wansview PC setup guide 518

1) Tap to add camera

2) Manually input the camera information. Tips: DID number can be checked from stickers on the back of the camera. You can check the DID from Wansview app If you have already added the camera on the mobile phone “wansview” app.

3) Hit “Add”.

4) “Save Success” will appear, click “OK” to close the dialog.

Play/Stop Video

Play Video

When the camera is connected, double-click the camera or right-click and choose “Play” to play the video.

Wansview PC setup guide 519

Stop Video

Click to stop the video or right-click the camera and choose “Stop”

Wansview PC setup guide 520

Video Interface

Wansview PC setup guide 521

Camera Settings

Edit Device

Right-click the camera info and select”Edit Device”, here can change the Device Name and Group; and edit the username and password if input wrong or changed; delete the device or Save the parameters you have edited.

Wansview PC setup guide 522

Advanced Settings

Wansview PC setup guide 523

On the Advanced Settings, user can check camera firmware version, set up time, create other account for operater or Visitor, set up WiFi and SD card recording etc.

Device Info

Wansview PC setup guide 524

User can check the camera status and Mac address, and check the camera’s firmware version.

Time Setting

Wansview PC setup guide 525

User can select a specific time zone, or sync the time to PC or to a NTP Server

User Setting

Wansview PC setup guide 526

User can create other accounts for family member or friends in User Setting.

Add an account with user name and password, and give a right to this account.

Tips: Administrator: All settings can be edited Operator: Can operate all the icons (such as listen, talk, flip/mirror) on the live video page. Visitor: Can only watch live video.

Wansview PC setup guide 527

User can also edit the account information, such as change the user name and password and change the role for each account, then Save. And Delete some accounts if you need

WiFi Setting

Wansview PC setup guide 528

User can set up WiFi for the camera is connected Ethernet cable, or change to other available WiFi. Search the available WiFi, and choose the one you want to connect, then input the WiFi password (click the icon behind to confirm if the password is correct). Save then Test.

SD/TF Setting

Wansview PC setup guide 529

Open the Plan Record, it will record continuously to SD card, each record length can be set between 2-15 minutes. The video stream can be recorded at 1080p(720p), 480p and 240p.

Wansview PC setup guide 530

User can record video to SD card. Before recording, please kindly make sure you have inserted a SD card, and format it.

Other Setting

1) OSD setting

Wansview PC setup guide 531

On the OSD setting, users can set up the Overlay name and Overlay time, so user can check name and time on the video screen.

If Overlay name and Overlay time and Display temperature and humidity are checked at the same, the Device name will show Temperature and Humidity.

Note: The temperature and humidity are unavailable on this model.

2) Audio

Wansview PC setup guide 532

User can adjust the camera’s microphone and speaker volume.

3) AC Frequency

Wansview PC setup guide 533

User can adjust the power frequency, Power frequencies include: 50HZ(220V voltage selects 50HZ), 60HZ(110V voltage selects 60HZ), 60HZ used in Japan, Canada etc.

4) Maintenance

Wansview PC setup guide 534

User can reboot and reset (restore) the camera.

Tips: To reset the camera, the camera will restore to factory setting.

Alarm Setting

In the Alarm Setting, use can set up the Alarm alert.

Wansview PC setup guide 535

Motion Detection

Wansview PC setup guide 536

User can set up motion detection area here to narrow the motion detected area to some important places, tick each window, move your mouse to the lower right corner and drag it can adjust the size of the window, and can move it to the needed area.

User can choose the sensitivity from low, middle and high. The high sensitivity will be easy to get alarm.

I/O Detection and Temperature Detection are disabled in this model.

Audio Detection

Wansview PC setup guide 537

Alarm Action

Wansview PC setup guide 538

If user set up alarm, the camera will execute a variety of alarm actions at linkage: snap to email, snapshot and video to FTP, snap and video to SD card.

And if you connect external I/O alarm device, it can trigger alarm too.

Tips: The mothod of”Trigger Alone” and “Combination Trigger”, if the user starts up an audio detection and motion detection, the “Combination Trigger” will be started up. Only when any abnormality is detected simultaneously by the audio detection and motion detection will the alarm action be triggered.

1) Email setting

Wansview PC setup guide 539

Sender: your email address

Smtp Server: such as smtp.gmail.com etc.

Smtp port: 465 or 587

SSL: SSL

User name:your email address, the same with sender

Password: your email password, if you are using Gmail, please ge nerate an app password, and using the app password. Download a document from our website on how to set up app password.

Receiver: any email address

After all the information are filled in, click “Save” and “Test” the email to see if the email setting is successful or not.

2) FTP Setting

Wansview PC setup guide 540

FTP Server Address: This field allows the user to designate an IP address or DDNS address for the FTP server.

Server Port: This field allows the user to designate the port number for the FTP server.

User Name: Input FTP user name.

Password: Input FTP password.

Path: Specify a folder for storing video and pictures, for example: ./Q3 alarm

Note: If you want to save the alarm picture and video to FTP, you must build an FTP sever, then create an FTP account with a password (not an anonymous account) on your FTP server and FTP account must have create and delete file rights.

Alarm Time

Wansview PC setup guide 541

After setting the type of alarm and alarm action, please set up the alarm time, the alarm action can only be triggered when armed. The Green color means the time is armed. User can choose “All Time” or “Clear Time”, and can also choose a specific time. 15 mintues for a interval.

The user can drag the mouse to perform continuous selection of the arming time.

Web Access

Wansview PC setup guide 542

If the camera is added via IP Address, right click and select web access can access the camera with default browser.

Tips: The Edge is not supported, please use Internet Explorer or Firefox or Chrome.

Wansview PC setup guide 543

Multi-View

User can monitor multiple cameras at the same time, 4-screen, 9-screen, M(6, 8,16, 25, 36) and full screen can be set up according to different demands.

Wansview PC setup guide 544

Local Setting

About software:

Wansview PC setup guide 545

Basic setting: User can set up lock screen password in case you won’t let others to see the video.

Record setting: User can set the Record path, and each recorded video can be set from 5-60 minutes.

Recorded video can be overwrite or stopped if the computer disk storage is not enough.

Record path, file name can not have. And () characters. Language setting: The language can be switched from English and Chinese,German,French.

More Languages will be added very soon.

Scheduled Recording

Before recording to your local computer, please make sure you set up the Record Path on the “Local Setting”. Then follow the below steps to set up the recording:

Wansview PC setup guide 546

1: Click “Create” to create a Record name, it will give you a name automatically(combination of date and time), user can edit the name.

2: Select time: User can “select all” if want to record 24/7, and clear it to choose a specific time by dragging or single-click the time interval.

3: Save: Save the record name and time interval you set up.

4: Double-click the Record name to choose it as the record plan.

5: Apply: Click “Apply”, a * will appear in front of the Record plan, it means the scheduled recording is working.

The icon will be shown on live video screen, it means the camera is recording automatically)

Wansview PC setup guide 547

Playback

On “Playback” page, user can playback the recorded videos on the local disk and SD card.

Playback Local Record

Wansview PC setup guide 548

1) Choose Local Record and selected the camera you want to check.

2) Select the Media Type(Video or Image)

3) Select the video in an exact date you want to playback

4) Recorded video list will be shown (Video starts with “P” for Scheduled Recording, and “H” for Manually Recording)

5) Double-click the recorded video name, video will be broadcast.

User can select a certain or all the video and delete it from the list and the record path.

SD Card Record

Wansview PC setup guide 549

1) Choose SD/TF record and selected the camera you want to check.

2) Select the Media Type(Plan or Alarm)

3) Select the video in an exact date you want to playback

4) Recorded video list will be shown, if it is not shown, please tap to show the list (Video starts with “nrc” for Scheduled Recording, and “arc” for alarm Recording)

5) Double-click the recorded video name, video will be broadcasted.

Lock

Lock the screen if you don’t want to operate it or prevent others to operate the camera.

The default lock password is 123456.

Wansview PC setup guide 550

PDF download

How to use Wansview PC Client Download