Why Do We Need Solar Security Cameras?

How Do Solar Security Cameras Work?

Features to Consider When Purchasing a Solar Security Camera

Installation Tips for Solar Security Cameras

Top Recommended Solar Security Cameras

Frequently Asked Questions

Why Do We Need Solar Security Cameras?

An increasing number of people are using smart cameras at home to protect their property or to look after the elderly and children. In fact, security cameras can effectively reduce the probability of burglaries and other crimes. Unlike indoor cameras with convenient installation environments, outdoor cameras often cannot find a suitable power supply or installation location. To meet this need, various outdoor cameras have emerged, especially in recent years, with battery-powered, wire-free cameras becoming increasingly popular. They can be easily installed at any location you desire.

However, battery-powered security cameras have their own limitations. Even with high-capacity battery options available, you still need to recharge them every 1-6 months. Outdoor cameras are usually installed on high walls, poles, or trees, and you often need a ladder to take down the camera for charging, which is undoubtedly a hassle. Solar security cameras can solve this problem by providing a continuous and clean energy source for the cameras, reducing maintenance efforts, being more environmentally friendly, and reducing electricity costs.

How Do Solar Security Cameras Work?

Solar security cameras convert solar energy into electrical energy through solar panels. This energy is stored in the camera’s batteries, keeping them continuously charged. The stored energy ensures the camera’s uninterrupted operation even during periods of limited sunlight, such as winter or rainy days.

Features to Consider When Purchasing a Solar Security Camera

Regarding Solar Panels:

(1) Flexibility:

The market offers various forms of solar panels. Integrated solar panels have a sleeker design but may limit the panel’s exposure to sunlight. Detached solar panels, connected by cables extending several meters, provide the flexibility to position the panels in a sun-rich location and adjust the angle for direct sunlight exposure.

(2) Material Quality:

Different solar panel materials have different photoelectric conversion efficiencies. Currently, common materials on the market include monocrystalline silicon, polycrystalline silicon, and amorphous silicon solar cells, with the more expensive monocrystalline silicon having the highest efficiency, up to 25%.

(3) Maximum Output Power:

The power output of a solar panel is critical for ensuring adequate energy supply. It is calculated under Standard Test Conditions (STC): a temperature of 25°C, solar irradiance of 1000W/m², and an Air Mass of 1.5. The maximum power output formula is the Panel’s Area (cm length × cm width) × 0.1 × Efficiency.

In practice, factors such as the duration of sunlight exposure, panel angle, environmental temperature, and air quality can affect the panel’s power generation.

Regarding Cameras:

When focusing on the camera itself, the features we need to concentrate on are no different from ordinary security cameras, such as resolution, night vision capability, AI detection abilities, and the camera’s field of view.

(1) Resolution:

The higher the camera’s resolution, the clearer the details you can see. However, it should be noted that an increase in resolution will also lead to more power consumption.

(2) Night Vision Capability:

Nighttime is the peak period for various incidents. Night vision capability is definitely an important value point to measure the usability of a security camera, whether it has color night vision ability, whether the picture has fewer noise points, and whether moving people and animals can be accurately and clearly captured at night. To learn how to choose a security camera with better night vision, you can read our other article: Best Night Vision Home Security Cameras – Things You Need to Know.

(3) AI Detection Capability:

With the development of AI technology, image recognition algorithms have become more refined. Many security cameras now have the ability to recognize people or other objects, such as humans, animals, and vehicles. They can detect different objects and bring you timely reminders, increasing security performance while reducing false alarms and missed reports.

Installation Tips for Solar Security Cameras

To maximize the efficiency of your solar security camera system, consider the following installation tips:

Optimal Panel Positioning:

Install the solar panel in a location that receives maximum sunlight throughout the year. Position it facing south in the Northern Hemisphere or north in the Southern Hemisphere. Adjust the tilt angle between the panel and the ground to optimize sunlight absorption.

Avoid Obstructions:

Ensure that the solar panel is free from any obstructions like trees or buildings that may cast shadows and reduce its efficiency. Also, keep it away from open flames or flammable materials.

Temperature Considerations:

Temperature affects solar panel efficiency. Ensure sufficient space between the roof and the panel to allow airflow and prevent overheating.

Regular Cleaning:

While solar panels require minimal maintenance, occasional cleaning is essential to remove dirt and debris that may reduce their effectiveness. In some cases, rainwater may naturally clean the panels, but periodic cleaning may still be necessary.

Top Recommended Solar Security Cameras by Tapo

Tapo offers an array of solar security cameras that cater to various needs. When selecting a solar security camera, consider the following:

Tapo Solar Panel Accessories:

Tapo A200 features a larger solar panel area and utilizes high-efficiency monocrystalline silicon cells. With up to 4.5W of power, just 30 minutes of standard sunlight daily can keep your Tapo battery camera operational around the clock.

Tapo Solar Security Camera Systems:

The Tapo C410 KIT combines the convenience of a Tapo A201 solar panel with the advanced features of the Tapo C410 camera. With 2K resolution and full-color night vision, this camera provides crisp and clear footage day and night. Equipped with AI detection capabilities, it offers accurate real-time notifications, enhancing security while reducing false alarms.

For those seeking higher quality, the Tapo C425 delivers exceptional performance. With upgraded 2K QHD resolution and a built-in Starlight Sensor, it captures vivid details even in low-light conditions. The camera boasts a large 10,000mAh battery, providing up to 300 days of extended battery life. This camera ensures reliable and long-lasting security protection even in regions or seasons with limited sunlight.

.

Tapo Wire-Free MagCam Bundle

.

Solar-Powered Security Camera Kit

Tapo C410 KIT

.

Solar Panel

Tapo A200

.

Frequently Asked Questions

To address common queries, here are answers to some frequently asked questions about solar security cameras:

Can solar security cameras work during winter?

Solar security cameras can function in winter. Although the daylight hours are shorter and the generated electrical energy is reduced, the energy stored in the battery is sufficient to maintain the camera’s normal operation.

Can solar security cameras work at night?

Solar security cameras are designed to operate at night. The energy stored in the battery during daylight hours powers the camera, enabling it to function seamlessly during nighttime.

Do solar panels work in the rain?

Solar panels continue to generate electricity during rain or cloudy conditions, although the amount of electricity produced may be lower.  Solar panels are designed to be waterproof, so there is no need to worry about water damage. Additionally, heavy rain can help clean the panels by washing away accumulated dust and pollen.

Do I need a solar panel for each camera?

The number of cameras that can be connected to a single solar panel depends on the power requirements, panel capacity, and charging system efficiency. Tapo solar panels have a single USB connector to charge one camera at a time.

How long does a solar panel take to charge a security camera?

Under optimal weather conditions with sufficient sunlight, and assuming the working temperature and humidity standard is met, usually about 30 minutes to an hour of direct sunlight per day can keep a Tapo Battery Camera running continuously (up to 100 events triggered per day).

How long do solar security cameras last?

The need to charge batteries is rare if you live in an area suitable for solar power generation and keep the solar panels clean and at the right angle.

Solar security camera batteries can last about one to six months on a full charge, even during weeks of cloudy skies. If the battery level is nearing 25% and there’s little sunshine predicted, consider bringing the camera or battery inside to charge.

Adjusting settings like motion detection, video resolution, frame rate, recording length, and turning off unnecessary lights can help prolong battery life.

At what temperature do cameras stop working?

The Tapo Solar Panel is rated for temperatures between -20℃ and 45℃. The optimal temperature range for battery charging is 0℃ to 45℃. Nevertheless, frost and ice can form on the lens when temperatures fall below freezing, obstructing the camera’s view. Snowfall can also impede the camera’s ability to record footage.

Can solar panels work without a battery?

Solar panels are devices that convert light into electrical energy but cannot store it. They generate higher voltage in strong light and lower voltage in weak light, resulting in unstable output that cannot reliably power devices. Voltage converters are used to stabilize the solar panel’s output to charge a battery. Devices then draw a stable supply of power from the battery.

Solar security cameras provide a perfect balance of security, efficiency, and sustainability. With careful selection and proper installation, these devices can offer a reliable security solution for those looking to protect their property with the added benefit of reducing their carbon footprint.

.

.

It means you can check out who is on your door before opening it while at your own home. You only need to check the video clip camera to see who your visitor is. 

So it will be easy to distance yourself from unwanted visitors and save your property more securely. Stay with us to get more information about these useful and popular cameras.  

What is a Tplink Tapo camera?

If you need something more than a traditional camera, choose the Tp-link Tapo camera. These security cameras will show you high-resolution videos with crystal-clear images. You can even get notifications while you are far from home because the Tapo camera will inform you whenever it detects some motions on your doorstep. 

You won’t miss anything by installing these new and innovative security cameras. Also, it is possible to make an honest communication with your visit while you are not home. Let’s use the Tapo camera to experience the convenience of life and peace of mind.

You will need a digital and electronic security option to protect your property in the digital world. Since burglars and intruders are improving, you must promote your security system too. Tp-link cameras can protect your home and office during the day and night.   

Generally, if you are looking for a camera to make your property more secure and modern, tapo cameras are the best choice. Inside its box, you will find an extraordinary camera. You may expect the camera to be heavy but lighter than expected. 

The lenses of this camera are lovely, and every customer is satisfied with its resolution or quality. Notice the Tapo camera has no power button because it is a plug-and-play smart device. 

There is also a rotating base where the camera can move 360 degrees. You can see the speaker for your audio, where you can communicate with each other. We mean the manufacturer designed the Tapo camera wisely and smoothly. 

Based on customers’ and users’ ideas or opinions, the Tapo camera is a good product in the UK market. If you rotate the camera upwards, you will notice 2 components. The first is for the reset button, which lets you reset the camera by default.

The second one is the micro SD slot. This is where you insert your SD card to save the recordings. Overall, people and users give this product a 5 score from 1 to 5. How about you? Is it what you need the most for your property and controlling process?  

Read More : How to Set Up SuperLive Plus

How can you install a Tplink Tapo camera?

As the Tplink Tapo camera is an electronic and digital device, you will need special expert knowledge to install it. Therefore you have to use the help of some mechanical experts to install this security option. 

It won’t be easy to install an electronic device on your own so ask some expert to help you. In case of incorrect installation, your Tapo camera won’t be able to show all its unique features and services. You need to spend some money on the installation of the Tplink Camera. 

Don’t worry; it won’t be too expensive, and it won’t take long to install a Tapo camera. There are well-experienced experts and knowledgeable men in the security system market, who use their help easily and quickly. Also, you can read tp link powerline setup here. 

The configuring step is one of the most critical phases of the installation process. Remember, there is a quick guide inside the box of the Tapo camera, so use it for the complete configuration process and details. It is helpful to check out the settings for configuring afterward.

What do we need to set up the TP-link Tapo camera? 

TP-link Tapo camera is one of the most secure and practical security cameras available in the UK. TP-link Tapo is an outdoor security WiFi camera that is easy, simple, and secure to set up. 

You will need a router, camera, and phone to set up a TP link Tapo camera. Don’t forget to download the Tapo app from the Apple App Store or Google Play. You must log in with your TP-Link ID in the following step. 

If you do not have a TP link ID, you must sign up at the beginning. There are 2 critical things for your camera setup: 

Installing the camera bracket is one of the essential steps to perform. The camera can easily face the wall. You can have the cable on any side; it will be your choice. Setting up the TP-link tapo is so easy. Also, you can remove it quickly.

This camera’s assembling process depends on where you want to install the camera. After installing the camera, insert 2 screws and hold the camera at the bracket.

There is a cover for the MicroSD slot and the reset button. You can remove the surface, white silicon rubber, around the sealing slot and need the Micro SD. You also have to consider the maximum gigabyte.  

Wall mounting instructions

It can be helpful to know about wall mounting instructions. We are going to explain the most critical steps in the wall mounting process:

This process can be helpful to mount your TP-link Tapo on the ceiling. It is crucial to know that you must install a camera base on the wall first. Do not install the camera directly into your camera.

Installation of the waterproof cable attachment

Besides all the mentioned processes, you must install the waterproof cable attachments for the network interface just after installing the outdoor camera. Remember to make sure that all parts are attached wholly and securely.

The good news is that there are proofing rings which flush and keep out the water. It is essential to install a waterproof seal to protect the power connectors. These waterproof parts are crucial because the TP-link Tapo camera can be installed outdoors.

How to uninstall the TP-link Tapo camera?

Where did you mount your TP-link Tapo camera? If you have mounted the TP-link Tapo camera on the wall, you have to spin anticlockwise to release the camera from the camera bottom. 

If you bought the newly designed camera base and didn’t mount it on the wall, you must insert a coin. Then, rotate anticlockwise to remove the camera. These cameras are the most secure systems with the most straightforward installation and uninstalling process.  

How do you set up the intelligent Tapo TP-link camera?

Before getting familiar with the TP-link Tapo camera setting and its features, you need to know that the TP-link tapo camera has too many types. All these intelligent cameras have the same target: home security WiFi smart cameras.

You can understand the setup process after unboxing the purchased tapo camera. There will be a guideline in its package. We are here to give you a quick start guide. A power adapter and mounting accessories are available inside the box. 

You set your TP-link tapo camera up on a flat surface or mount it to a wall. The first step is setting up the camera, so you will need a WiFi connection and a smartphone to configure it. 

At the beginning point, you have to download the Tapo app. When you enter the interface, you must register or log into your account. Plug in the camera and select the tapo in the app. 

The camera’s LED should alternately blink green and red; if it doesn’t, reset your camera. These smart and modern cameras have a WiFi signal, which you will connect to first. Then, you can use the app to link it to your home network. 

Remember, you can only link to the 2.4 gigahertz spam, not the 5 gigahertz bear. You have to check your camera specifications and details, then try to connect it. In this case, you have set up your camera.

If you want to keep your videos in local storage, insert a micro SD card into the proper place. These cameras support up to 128 gigabytes. 

Once inserted, go to the camera settings and ensure the local recording is active. The SD card is suitable for loop recording.

How do you insert a microSD card? 

In the first phase of most installation processes, you must loosen the screws. These cameras are also the same. You first have to reduce the firm screws. In the next step, you can insert the microSD card for local recording. 

After inserting the microSD card correctly, go to the TP-link Tapo camera setting and micro SD card section. In this step, you can check the status of your inserted micro SD card or format this card quickly. 

How do you set up the TP-link Tapo camera outdoors? 

The best WiFi camera for outdoor comes from TP-Link company. Various Tapo models of this brand are also available in the UK market. Each camera has unique specifications with different:

Although we will explain the TP-link Tapo camera for outdoor, you are free to use these cameras anywhere. You only need the mounting nails template and circles to establish a perfect view on any wall, ceiling, or pole.

Besides all the mentioned features, you can find other special features available on the TP-link Tapo camera box. You can check the working and installing procedure via the manual instructions or guideline template.

As we have said before, downloading the camera app is the initial step of using this camera. Then, you can find all the settings and options to adjust your needs. Inside the box, you can find the complete manual. We know checking the box will increase your choice:

Now you are familiar with the available components of this camera. It is the time to make a connection for the power adapter. Also, the bracket is helpful to install other cameras, but first, you need to insert the cable through the hole, and then you can install the bracket.

How to connect Tapo camera to wifi (Complete set up of TP-link Tapo camera)

We are going to explain to you how to set up a Tapo camera. First, you have to install the Tapo application from the Google Store. After installation, you have to check the home screen of the table application.

You must put your new camera into pairing mode in the next phase. For this step, it is essential to reset the camera. Therefore, you will need to find the reset button. The reset button place is different in various models of Tapo cameras.

For example, in some cameras, the reset button is near the memory card slot. Note that the reset button is near the memory card slot in most Tapo cameras. You can squeeze and maintain the reset switch for 5 seconds.

Then the LED starts blinking; it shows your Tapo camera is in pairing mode, so after the reset process, the camera automatically goes to pairing mode. You can add your new camera to the Tapo app for PC in this part of the complete setup procedure.

It would help if you tapped on the plus button on your smartphone. Don’t forget to select your new camera model, then tap on next. You can see the smartphone screen and ensure your used camera is in pairing mode.

Thump on the attached switch and stay for a complete connection. You also must select a WiFi network that is useable for your smartphone hotspot. Enter the WiFi password or mobile hotspot password, then tap on the next and next again.

Postpone for the camera to link to the WiFi web. In the final step, you can set a new name for the device and tap on next. Don’t forget to select the location, like bedroom, then tap on next. You need to choose one icon from the available list. 

How do you reset the TP-link Tapo camera? 

The TP-link Tapo camera’s reset process is the same as the reset procedure of the TP-link wireless modems. You have to follow the below instructions to reset your TP-link tapo camera: 

How can you connect to a Tplink Tapo camera?

Choosing and purchasing a Tp-link Tapo camera is one thing and installing it is another. You need to read the manual and instructions or watch an installation video to understand how to install a Tplink camera on a wireless router. 

It won’t be hard to install and use Tapo cameras as a security system. You only need to check out 3 essential steps below: 

16 features of a Tplink Tapo camera

Smart door viewers and camera doorbells are previous security items that help you check who is waiting at your door. With time, the Tplink Tapo camera comes to the security market to protect your property more stricter. 

The features of this digital security device are second to none; therefore, you won’t be regretful of the money you have spent on it. Imagine you are not home, and your sister comes to your door. What will happen? 

The Tp link camera will inform you at the moment, so you only need to call your sister and talk to her while she is waiting at your door. The Tapo camera also makes it possible to speak through its microphone. We have mentioned some important and well-done features of Tp-link cameras below:  

Does a Tplink Tapo need a subscription?

Please note that every fantastic security device is purchasable, and you have to subscript it. Tp-link Tapo camera offers a one-month free trial, so you need to subscript it after your free trial. The subscript procedure is the same as below: 

Is it possible to use the Tplink Tapo camera without the internet?

The good news is you can even use the Tp-link Tapo camera and watch videos without any internet connection. There is only one thing to be considered, your phone and the camera must use the same wireless network (such as tp link networking)

You also can store the videos and images on the SD card on your Tapo camera while you don’t have an internet connection. The Tp-link camera needs a WiFi connection for its setup and making a connection with your phone.

But the recording option and showing live view are still possible when there is no internet connection. It is good to know Tapo camera will always need a WiFi connection because the IP address and router make it connect to the phone. 

How to view Tapo camera on a PC? (Tapo app for PC)

The best and most updated feature of the Tplink Tapo camera on pc is the possibility of connecting your PC. The most important matter to viewing the Tplink tapo camera on PC is their same router. It means your PC and camera must use the same router. 

Go to the web to view the camera on your computer (Tapo app for PC), then log into your account and view the camera on your PC. As the Tapo camera owns a third-party protocol, it is possible and easy to view the camera on a PC.

The user should input the URL of the Tplink tapo camera on the PC, player application and watch live videos on their PC. Tapo camera tries its best to make users and customers satisfied and pleasant.  

Conclusion

We have tried to share the most important information about the Tplink Tapo camera. We hope this article will be useful for you so you can choose your security system. 

Tplink camera is one of the most useful security systems to protect your property and avoid unwanted visitors. Don’t hesitate and purchase one of these digital devices to make your property more secure and safer. 

Take CPE as an example.

Access web management page of CPE

Please follow this link to access the web interface of CPE.

Note:CPE210 is a 2.4GHz device which can only broadcast 2.4GHz wireless network;CPE510 is a 5GHz device which can only broadcast 5GHz wireless network.Here we take CPE510 as example in this article.

Run Quick Setup

Step 1:

Go to Quick Setup-> Choose “Access Point” –> Click Next

Step 2:

The default IP Address of CPE is 192.168.0.254,we can change it to other IP addresses to fit in the main router’s network.For example,if the main modem/router’s IP Address is 192.168.1.1,we can set up the CPE510 as 192.168.1.* (*=2~254)，Subnet Mask 255.255.255.0 .

It is also fine to leave it as the default value if you are not sure about the main router’s IP address,then click Next.

Step 3:

Customize your wireless name (SSID) and password

Step 4:

Click: Finish, and wait for the settings to take effect, it takes about 1 minute.

Relocate the CPE

You may now unplug the computer from the LAN port of the PoE adapter,and connect the wired network(internet modem/router) into the LAN port.

Final Computer Setup Reversion(For Windows OS)

We need change the IP settings back on the computer after the configuration.

Please find Local Area Connection/Ethernet on the computer, if you cannot remember the procedure, please refer to the FAQ again.

How to login to the Pharos’ web management page?

How to Configure Pharos Device

Read More : TP-Link Pharos Series Installation Guide

Go to Properties →Internet Protocol Version 4(TCP/IP)→ Select “Obtainan IP address automatically” and “Obtain DNS server address automatically”

Click OK to exit

Click OK again to apply the settings.

Final Computer Setup Reversion (For Mac OS X)

Go to the Apple->System Preferences->Network-> Highlight Ethernet –>Configure IPv4: Using DHCP.

Click Apply.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

.

.

This guide introduces how to build a wireless network using the CPE/WBS products:

1. Check the System Requirements

2. Log In to the Device

3. Set Up the Wireless Network

The following parts detailedly introduces these steps.

1Check the System Requirements

Operating System:

Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Linux, or Mac OS X.

Web Browser

Google Chrome, Safari, Firefox, and Apple Safari. IE browsers are not recommended.

2Log In to the Device

Before configuring the device, you need to access the PharOS configuration interface. Follow the steps below:

1)Connect your PC to the device.

2)Set the IP address of your PC as static IP address on 192.168.0.X subnet (X ranges from 2 to 253, e.g.192.168.0.10)

Figure 2-1Specifying the IP Address

3)Launch a web browser on and enter the management IP address of the device (192.168.0.254 by default) in the address bar to load the login page of the PharOS configuration interface.

Figure 2-2Entering the Management IP Address

.

4)Use admin for both of User Name and Password. Select the appropriate language from the Language drop-down list. Read and agree the terms of use, then click Login.

Figure 2-3Loging In

5)Create a new username and password for network security. Click Finish to log in to the PharOS.

Figure 2-4Creating a New Account

3Set Up the Wireless Network

You can use the Quick Setup wizard to quickly configure your device step by step. Choose the suitable operation mode according to your network environment and follow the step-by-step instructions.

3.1Access Point

Follow the steps below to configure the device as Access Point mode:

1)Go to the QUICK SETUP page, select Access Point and click Next.

Figure 3-1Selecting an Operation Mode

2)In the LAN Settings section, specify the LAN IP address and the Subnet Mask for the device. Then, click Next.

Figure 3-2Specifying the LAN Settings

3)In the Wireless AP Settings section, specify the basic wireless parameters to create a wireless network. Click Next.

Figure 3-3Specifying the Wireless AP Settings

4)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-4Checking the Settings

5)Connect the device according to your network topology and use it normally.

3.2Client

Follow the steps below to configure the device as Client mode:

1)Go to the QUICK SETUP page, select Client and click Next.

Figure 3-5Selecting an Operation Mode

2)In the LAN Settings section, specify the LAN IP Address and the Subnet Mask for the device. Then, click Next.

Figure 3-6Specifying the LAN Settings

3)In the Wireless Client Settings section, click Survey to search for the upstream wireless network.

Figure 3-7Searching for Upstream Wireless Networks

4)Select the desired wireless network and click Connect.

Figure 3-8Selecting an Upstream Wireless Network

5)In the Wireless Client Settings section, specify the wireless parameters to connect to the specified wireless network. Click Next.

Figure 3-9Specifying the Wireless Client Settings

6)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-10Checking the Settings

7)Connect the device according to your network topology and use it normally.

3.3Repeater (Range Extender)

Follow the steps below to configure the device as Repeater (Range Extender) mode:

1)Go to the QUICK SETUP page, select Repeater and click Next.

Figure 3-11Selecting an Operation Mode

2)In the LAN Settings section, specify the LAN IP address and the Subnet Mask for the device. Then, click Next.

Figure 3-12Specifying the LAN Settings

3)In the Wireless Client Settings section, click Survey to search for the upstream wireless network.

Figure 3-13Searching for Upstream Wireless Networks

4)Select the desired wireless network and click Connect.

Figure 3-14Selecting an Upstream Wireless Network

5)In the Wireless Client Settings section, specify the wireless parameters to connect to the specified wireless network. Click Next.

Figure 3-15Specifying the Wireless Client Settings

6)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-16Checking the Settings

7)Connect the device according to your network topology and use it normally.

3.4Bridge

Follow the steps below to configure the device as Bridge mode:

1)Go to the QUICK SETUP page, select Bridge and click Next.

Figure 3-17Selecting an Operation Mode

2)In the LAN Settings section, specify the LAN IP address and the Subnet Mask for the device. Then, click Next.

Figure 3-18Specifying the LAN Settings

3)In the Wireless Client Settings section, click Survey to search for the upstream wireless network.

Figure 3-19Searching for Upstream Wireless Networks

4)Select the desired wireless network and click Connect.

Figure 3-20Selecting an Upstream Wireless Network

5)In the Wireless Client Settings section, specify the wireless parameters to connect to the specified wireless network. Click Next.

Figure 3-21Specifying the Wireless Client Settings

6)In the Wireless AP Settings section, specify the parameters to create a new wireless network for the downstream clients. Click Next.

Figure 3-22Specifying the Wireless AP Settings

7)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-23Checking the Settings

8)Connect the device according to your network topology and use it normally.

3.5AP Router

Follow the steps below to configure the device as AP Router mode:

1)Go to the QUICK SETUP page, select AP Router and click Next.

Figure 3-24Selecting an Operation Mode

2)In the WAN Connection Type section, specify the connection type according to your need and click Next.

Figure 3-25Specifying the WAN Connection Type

The device supports three types of the WAN connection, including PPPoE, Dynamic IP and Static IP. You can contact with your ISP to confirm your WAN connection type.

»PPPoE

Select PPPoE and click Next, then the following page will appear. In the WAN Settings section, specify the parameters that are provided by your ISP and click Next.

Figure 3-26Specifying the WAN Settings

»Dynamic IP

Select Dynamic IP and click Next. In this type, the device will obtain a WAN connection automatically without any WAN configurations.

»Static IP

Select Static IP and click Next, then the following page will appear. In the WAN Settings section, specify the parameters that are provided by your ISP and click Next.

Figure 3-27Specifying the WAN Settings

3)In the Wireless AP Settings section, specify the basic wireless parameters to create a wireless network. Click Next.

Figure 3-28Specifying the Wireless AP Settings

4)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-29Checking the Settings

5)Connect the device according to your network topology and use it normally.

3.6AP Client Router (WISP Client)

Follow the steps below to configure the device as AP Client Router (WISP Client) mode:

1)Go to the QUICK SETUP page, select AP Client Router (WISP Client) and click Next.

Figure 3-30Selecting an Operation Mode

2)In the WAN Connection Type section, choose the connection type according to your need and click Next.

Figure 3-31Specifying the WAN Connecting Type

The device supports types, PPPoE, Dynamic IP and Static IP for the WAN connection. You can contact with your ISP to confirm your WAN connection type.

»PPPoE

Select PPPoE and click Next, then the following page will appear. In the WAN Settings section, specify the parameters that are provided by your ISP and click Next.

Figure 3-32Specifying the WAN Settings

»Dynamic IP

Select Dynamic IP and click Next. In this type, the device will obtain a WAN connection automatically without any WAN configurations.

»Static IP

Select Static IP and click Next, then the following page will appear. In the WAN Settings section, specify the parameters that are provided by your ISP and click Next.

Figure 3-33Specifying the WAN Settings

3)In the Wireless Client Settings section, click Survey to search for the upstream wireless network.

Figure 3-34Searching for Upstream Wireless Networks

4)Select the desired wireless network and click Connect.

Figure 3-35Selecting an Upstream Wireless Network

5)In the Wireless Client Settings section, specify the wireless parameters to connect to the specified wireless network. Click Next.

Figure 3-36Specifying the Wireless Client Settings

6)In the Wireless AP Settings section, specify the parameters to create a new wireless network for the downstream clients. Click Next.

Figure 3-37Specifying the Wireless AP Settings

7)In the Finish section, review the configurations and click Finish to complete the quick setup.

Figure 3-38Checking the Settings

8)Connect the device according to your network topology and use it normally.

.

CamhiPro user manual

How to add CamHi camera to Ispy

1, RTSP to add

1、main stream：rtsp://ip address/11
2、vice stream：rtsp://ip address/12
Find “FFMPEG (H264)” this column, fill in information of RTSP in the URL.After adding can test is successful

Go to “Camera” option.

Input your camera ip address, User name and Password, click “Finish”, add camera succeed.

The difference between camhi and camhipro

The camera can use camhi and camhipro app at the same time, camhipro’s interface design is more modern, except for the interface there is no other difference, the functions are the same

Read Next : CamHi for PC guide and download

.

Other functions

Camera list display mode

Click the camera list interface icon  to select the camera list in large or small image mode.

Sidebar settings

Click the camera list interface button, or swipe the screen to the right in the camera list interface to enter the APP sidebar. The APP name is displayed on the sidebar. the below displays APP version.

Click Local File to enter the local file interface. This interface displays all the local videos and pictures saved by this camera on this phone. Click on the file to playback the video file or view the local picture. Click the Edit button to delete the file.

Click the More button to check whether the APP has obtained the notification permission of the mobile phone. If the display is not enabled, the APP cannot send the alarm push message. Clicking enabled, you can jump to the setting interface to open the notification permission.

Video/Image search and view

Local recording playback and download

Find the camera to be viewed in the camera list interface, click the icon, select the recording page, the recording file will be displayed, you can sort according to the size and length of the video file, click the button, you can save the video file to the mobile phone album. Click the edit button, it can delete the selected video file.

View local snapshot images

Click on the image page in the local file interface, the local snapshot images will be displayed, the images will be sorted according to the capture time, click the preview thumbnail to view the image, click the button, you can delete or save the image to the album.

Remote video playback and download

Remote video playback

Click the button “camera list interface” to enter the remote recording list interface. The APP searches for the last 6 hours of video files by default. You can customize the sorting according to the recording time, click the video file, and then click play to playback the video files in the SD card of the device.

Remote video download

Click on the video file in the recording list interface, and then click Download, the video file will be downloaded automatically. The downloaded video file will be saved in the local recording interface. After the video download is completed, you can click to continue downloading, continue to download other video files, or click view, will jump to the local recording interface automatically.

Remote video search

Click the button on the recording list interface, the search option appears, you can select the recording search range as needed.

Search time range is optional

Function settings

When the camera is online, click the camera list interface or the live interface icon to enter the camera parameter setting interface.

Basic settings

Wifi settings

Display the WIFI network connected to the current device

Click to get the wireless network around the device, the device will search for the WIFI network in the current environment automatically; select the password to configure the WIFI of the current device.

Change password

The access password of the camera can be modified. When ticking display password, the password will be visible.

Alarm settings  

Alarm management and notification

Select On to indicate that a push message will be sent to the phone when alarming.

1.Motion detection alarm

Select On to indicate that the device has enabled motion detection. Clicking adjust motion detection, it can draw motion detection area and adjust motion detection sensitivity (This function is suitable for some models.)

2.Sound alarm

Select On to indicate that the device with microphone function. When the surrounding sound is greater than the intensity of the device check sound, trigger an alarm, click to adjust the sound alarm, you can adjust the sound alarm sensitivity

Alarm Linkage

Select On to indicate that the alarm capture picture is saved to the SD card.

Select On to indicate that the alarm recording file is saved to the SD card.

Select on to indicate that when alarming the camera will sound an alarm. Siren type and the duration of the siren is optional

Email alarm linkage

Select On to indicate that the device will trigger the alarm and send a picture to the mailbox. Click Configure Email to set the mailbox information.

Send an email to the QQ mailbox as an example:

Smtp server: smtp.qq.com

Port: 465

Secure connection: SSL

Username: QQ number of the outbox

Password: Authorization code of the outbox QQ mailbox

Receiving address: the mailbox that receives the alarm picture

Sender address: sender email address, here is the QQ mailbox as an example, you need to fill in the QQ email address (consistent with the user name). Subjects and content can be filled in casually. After filling out, click the Apply button, then click the Test button to check if you can send an alarm email.

FTP alarm linkage

1.Alarm recording is saved to FTP

Select On to indicate that the alarm recording file is saved to FTP.

2.alarm capture saved to FTP

Select On to indicate that the alarm capture image is saved to FTP.

Click Configure FTP to set FTP information.

Server address: Fill in the erected FTP address

Port: Fill in the FTP port

Username and password: Fill in the username and password set in FTP

After filling in, click the Apply button, then click the Test button to check if you can send an alarm picture to FTP.

Picture capture number setting

You can set the number of alarm capture pictures, 1-3 sheets are optional

This function is suitable for some models.

Audio/Video management

Video settings

Can customize device’s code rate of first code stream and second code stream

Can customize device’s frame rate of first code stream and second code stream

1-6 can be set, the smaller the value, the better the image level, the larger the code stream

50Hz and 60Hz optional

Audio settings

Adjust the input volume of the device

Adjust the output volume of the device

SD Card recording and capacity

SD Card plan recording

Select on, the device will save the recording to SD card

Can adjust the length of each recording file manually.

1.Simple settings

Select Simple settings, the recording time period defaults to Monday-Sunday full-day recording.

2.Advanced settings

Select advanced settings to customize the time period for each day of recording manually

Enter the advanced settings interface, click the quick edit button, select the time period to be recorded, you can customize the recording time period; edit it, clicking the Finish button to save the settings.

SD Card settings

Can view the total space and free space of the device SD card, can format SD card

System settings

Device time settings

1、Synchronize device time to phone time

2、The device time zone can be set. After the time zone is set successfully, the device will restart automatically.

Initial settings

The camera will restart after clicking

The camera will reset after clicking

Device information

Can get the device information of the camera: including device name, device type, Network type, number of user connections, software version, IP address, Subnet mask, gateway, DNS, etc.

Check for updates:

After clicking, the camera will check the firmware version automatically. If there is a new version, it will prompt for updates, click to upgrade online

(This function is suitable for some models)

Function description of live broadcast interface

Ordinary camera interface

The ordinary camera monitoring interface is displayed in the small screen mode by default. The function selection button is displayed at the bottom of the screen. More function keys can be called to slide to the left in the blank space. The function description of the buttons is shown in the figure below.

Note: Some functions require device support

PTZ function:

For devices with PTZ function, use your finger to swipe the live video, the camera will rotate according to the direction of the finger.

Exit the live interface:

Press the blank space and pull down on the small screen interface or click the back button to exit the live interface.

Panoramic camera interface

The panoramic camera will have different live broadcast interfaces depending on the model. It subjects to the connected model. The key function description as following:

Exit the live interface:

Press the back button to exit the live interface

View the camera

After adding the camera for a few seconds, wait for the camera to connect to the camera automatically, prompt the online description to view the camera video, click on the camera that displays online to enter the camera live interface.

Camera status description:

Connecting: At this time, the camera is establishing a connection with the network camera. According to different networks, the connection time is different.

Online: This status indicates that the device is connected properly; click to view the video;

Not connected: This status indicates that the device is offline

Password error: This status indicates that the camera login password is wrong. Clicking on the camera in this state will pop up the Change Password dialog box.

Add camera

Install the APP, connect the mobile phone to the WIFI network, enter the APP and click the Add Device button to enter the Add Device interface. If it is the first time to use or restore the factory settings: the camera is not connected to the network, clicking the new device; the camera that has connected to the network, clicking on the device in use

New device add

After clicking the “New Device” button, power on the device, wait for about 30 seconds, confirm that the device is working, click next.

Connected to Network cable

If the device is connected to the network cable, click the “Connected Network Cable” button, the APP will search for the UID of the device in the current LAN automatically. Selecting the UID to be added and click the Add button, the device will search for the nearby WIFI signal automatically to enter the wireless configuration interface. Enter WIFI password, click “Configure wifi and add”, after WIFI configuration successfully, jump to the device list interface; if you do not want to configure WIFI temporarily, click the “Do not configure, directly add” button, adding camera fter confirmation.

Un-connected to Network cable

If the device is not connected to the network cable, click the “Un-Connected to Network Cable” button to enter the interface for selecting the network type.

Sound wave configuration network support equipment: PTZ Camera, Card type camera, Bulb camera, Small flying saucer camera, etc.

AP configuration network support equipment: Box camera, PTZ Camera, Speed dome camera, Big flying saucer camera, etc.

Sound wave configuration network

When the power is turned on, the device will enter the waiting state, and the device will send out a “beep” sound intermittently. Click Next to scan the QR code of the device UID number with the mobile phone. If there is no QR code, click Skip. Enter the password of the WIFI signal to be configured, click to start the sound wave configuration, the system will configuration WIFI automatically. After WIFI configuration successfully, there is a voice prompt

AP configuration network

When the network cable is not connected, turn on the power, click to add, the APP will search for hotspot signals of nearby cameras automatically. The hotspot format is IPCAM-XXXXXX, the password defaults to 01234567. Selecting the hotspot of the camera to be added, clicks connect. After connecting successfully, enter the device add interface, click Add, enter the wireless configuration interface, enter the router’s WIFI password, click “Configure wifi and add”, after WIFI configuration  successfully, jump to the device list interface; if you do not want to configure WIFI, click the button ” Don’t configure, add directly”, add camera after confirmation.

Note: AP configuration network needs to open the phone’s GPS function first.

Add device in use

Scan QR code

Generate a QR code by using the online QR code generation tool, and then scan the QR code through the mobile APP to scan and add.

Search for nearby devices

1、Click the button “Search for nearby devices” to search for the ip camera in the wireless network where the phone is located, and select the corresponding UID.

2、Enter the camera password (the camera default password is admin)

3、Click the button “Add” to add a camera.

Delete camera

In the device list interface, long press the camera to be deleted or click the button “setting” to enter the camera setting interface, click the button “delete device” to delete the added camera.

.

How to set alarm to send Email

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function. Settings like below.

The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page. When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size. After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:
send alarm and pictures to email
send captured pictures to assigned FTP server
send video recording to assigned FTP server
capture a picture, then save to TF Card
Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)
linkage Preset: after the alarm, call preset
alarm capture quanity, setting as required (1-3 pieces)

If you want set Email alarm, please tick ”E-mail Alarm and Send with Picture”. and then click “Email setting”

3. Setting Email

The items in above picture is mandatory fields need to fill in. If the filled content is not qulified, the setting will not be successful. After writing completed, click Apply firstly, then testing, it will reminder testing successfully when finished.

Note:

If your Gmail mailbox opened “2-Step Verification”, then you need to set up a separate “app passwords” for camera login,

How to set up “app password” you can click on the “Learn more” to get help

If you do not know the security settings of other mailboxes, we recommended use Gmail.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

How to set alarm to upload pictures and video to the FTP server

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function.

Settings like below. The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page.

When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size.

After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:

send alarm and pictures to email

send captured pictures to assigned FTP server

send video recording to assigned FTP server

capture a picture, then save to TF Card

Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)

linkage Preset: after the alarm, call preset

alarm capture quanity, setting as required (1-3 pieces)

If you want set alarm to upload pictures and video to the FTP server, please tick ”Save Picture on the FTP Server” and ”Save Video on the FTP Server”. and then click “Email setting”

3. Setting FTP Server

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

Timing capture and timing record of SD card

1.Timing capture

Choosing “save image to SD Card” or “save images to FTP server”, at a regular interval (can be set like above picture), the device will capture images saving to SD Card.

Click “FTP” into set FTP

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

2. Timing record

Video file duration: can set video file duration, default is 600 seconds.

Open video: can choose whether open video to TF Card

Stream: can set recording stream

recording time: set timing recording time as required

then confirm the camera support SD card and insert SD card, as shown in below picture:

How to view pictures card and download video of SD

Click “SD card” button in IE home page of camera.

Page will display the date of picture and video, select date.

Images folder to store pictures, record folder store videos.

Open images folder, click the images file name directly view picture.

Open record folder, click the record file name to download video.

CAMHI IP Camera Port mapping setting method

2.Please modify HTTP port number.

The device HTTP port mapping to the external network router,
“External ports”: This port is corresponding to the access requirement of outside network
“Internal Port”: port for this equipment
“Service agreement” selects “ALL”
“IP address”: LAN IP address of the camera.

NOTE:
If your router supports UPNP function, you can also use UPNP port mapping automatically.
UPNP stands for universal plug and play, if you started UPNP, once the IP camera was connected into the LAN, it will communicate with the router of the LAN.
It will request the router to open a port to forward its own port. User doesn’t need to log in the router to set the port forwarding.

users in the use of the function, need to confirm a router also is enabled UPNP; Because many router model, not necessarily can very good support UPNP, testing and supporting the router is very good with, or suggest not start the function. At present test and TP-LINK router cooperate good.

.

Conventions

When using this guide, notice that:

Features available in VIGI Security Manager may vary due to your region, device model, and firmware version. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Users must take full responsibility for their application of any products.

This guide uses the specific formats to highlight special messages. The following table lists the conventions that are used throughout this guide.

VIGI Security Manager User Guide

Read Next :

• XMEYE For Mac Full User Guide
• Uniview NVR Remote Access
• EseeCloud CMS Full Setup Guide

More Information

1

Get Started with VIGI Security

Manager

This chapter guides you on how to install VIGI Security Manager and choose the network topology based on your needs. VIGI Security Manager offers easy and efficient management for security cameras and VIGI Network Video Recorder. This chapter includes the following sections:

Install VIGI Security Manager

Determine the Network Topology

With a reliable network management platform powered by VIGI Security Manager, you can watch the live view and playback, add devices, configure events, set recording and storage schedule for cameras, and export recordings to your computer.

1 Install VIGI Security Manager

VIGI Security Manager is provided only for Windows operating systems. Make sure your PC’s system meet the following requirements, then properly install the VIGI Security Manager.

System

Requirement

Operating System: WinXP/Win7/Win8/Win8.1/Win10. (We recommend that you deploy VIGI Security Manager on a 64-bit operating system to guarantee the software stability.)

Install VIGI Security Manager

2 Determine the Network Topology

The network topology that you create for VIGI Security Manager varies depending on your requirements.

The following figures show two typical application scenarios.

Use VIGI Security Manager in Local Network

InternetVIGI CameraVIGI CameraVIGI Network Video RecorderTP-Link Switch

=

VIGI Security Manager

When the computer is in the same subnet as your cameras and VIGI Network Video Recorder, download and install VIGI Security Manager on your computer to watch the live view and playback, add devices from the discovered list, manage devices, set recording and storage schedule for cameras and export recordings to your computer.

Use VIGI Security Manager Remotely

InternetVIGI CameraVIGI CameraVIGI Network Video RecorderTP-Link SwitchVIGI Security Manager

If you want to monitor your home or office while away, you can download and install VIGI Security Manager on a computer connected to the internet, then log in to your TP-Link ID. With the cameras or the VIGI network video recorder bound to your TP-Link ID, you can watch the live view and playback.

2

Add Devices to VIGI Security Manager

This chapter guides you on how to add cameras and VIGI NVRs to VIGI Security Manager. You can add cameras and VIGI NVRs locally and remotely based on your needs. This chapter includes the following sections:

Add Devices in Local Network

Add Devices Remotely

1 Add Devices in Local Network

To add NVRs and cameras locally, ensure that your devices should be in the same subnet as your

computer.

1. 1 Add Devices to VIGI Security Manager When TP-Link ID isn’t Logged in

Choose one of the methods below (Add Devices Singly, Add Devices in Batches, Add Devices Manually) and follow the steps to add your devices.

■ Add Devices Singly

Go to

Settings

>

Device List

>

Discovered Devices

and click in the list.

0 Configure NetworkSet the IP address, gateway and subnet mask of your device.

O Refresh

Click to refresh the device list.

Enter the password of your device. VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click

Verify

.

Note:

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

(Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click

Confirm

.

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

4.

Wait for the device to be added, then click OK.

■1.Add Devices in Batches

Go to Settings > Device List > Discovered Devices, select the devices you want and click

Storage Management

Export Recordings

File Settings

Export Format

2.

Enter the password of your devices. Click Continue.

Note:

If you can’t add devices in batches, try adding your devices separately instead.

For the camera with no password, you need to set a password and a password reset email to

enhance the security before adding it.

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

Click

Next

after the devices are verified.

Add Device x

O Verify Device 0 Set Recordings 0 Complete

2 camera verified. Next

(Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click

Confirm

.

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

Schedule camera on computer. It determines the time period for camera

recording.

Storage Location Click Browse to select the storage location of files.

Wait for the device to be added, then click

OK

.

■ Add Devices Manually

Go to

Settings

>

Device List

>

Discovered Devices

and click

Select the device type, and enter the IP address/Domain name and port number of your device. By

default, the port number is 80. Then click Add.

Ätp-Iink I VIGIIEI$ e□ X

DeviceLive View Playback SettingsMy Devices Discovered DevicesPlease log in.

Device ListID Add by Device ID + Add Manually0 Configure Network 0 RefreshFirmware Update□ No. Device NameIP AddressOperationStorage□ 1 TP-Link Camera192.168.1.40Storage ScheduleStorage ManagementExport RecordingsFile SettingsExport FormatHTTP PortMAC Address803C-84-6A-AF-96-50Device Type ® Camera

Enter the password of your device.

VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click

Verify

.

Note:

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

(Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click

Confirm

.

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

Wait for the device to be added, then click

OK

.

1. 2 Add Devices to VIGI Security Manager When TP-Link ID is Logged in

Follow the steps below to add a device.

Go to

Settings

>

Device List

>

Discovered Devices

and click

+

in the list.

0 Configure NetworkSet the IP address, gateway and subnet mask of your device.O RefreshClick O Refreshto refresh the device list.

Enter the password of your device. VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click

Verify

.

Note:

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

Wait for the device to be added, then click

OK

. The device is now bound to your TP-Link ID. Note that you need to add the device again if you log out of your TP-Link ID.

2 Add Devices Remotely

Every VIGI NVR and VIGI Security Camera has a device ID printed on its label. When your devices are not in the same subnet as your computer, you can add them remotely by verifying its device ID. Make sure your computer and devices all have access to the internet before adding your devices. Follow the steps below to finish the configuration.

Go to

Settings

>

Device List

>

Discovered Devices

and click

ID

Add by Device ID

. If you have not logged in to your TP-Link account, use your TP-Link ID and passwword to log in first.

■) tp-link I VIGIDeviceDevice ListFirmware UpdateStorageStorage ScheduleExport RecordingsFile SettingsExport Format

X1i jiani@tp—link. com. enLive View Playback SettingsEl # $ 0

Find the device ID on the product label and enter it into the blank, then click

Add

.

Enter the password of your device and click

Verify

.

Note:

• For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

Displays the username of the camera.

Username

Password

Set the password of the camera.

Confirm Password

Confirm the password of the camera.

Password Reset Email

Set the email address for resetting the camera’s password.

• For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

4. Click OK. The device is now bound to your TP-Link ID.

TP-Link ID Management

TP-Link ID can be used to view the Live View video and manage the devices remotely in multiple platforms. In VIGI Security Manager, you can log in with your TP-Link IDs and manage the devices bound to them. This chapter contains the following sections:

Log In with Your TP-Link ID

Manage Your TP-Link ID

Change the Password

Log Out the TP-Link ID

1 Log In with Your TP-Link ID

You can log in to VIGI Security Manager with multiple TP-Link IDs and switch the login account whenever you want. After you logging in, the NVR can manage the devices bound with the logged TP-Link ID only.

Note:

If you have added local devices to the manager, a window will pop up after login. If you want to manage them via cloud services, click

Bind

to bind them with the logged TP-Link ID in batch; if not, click

Cancel

.

After login, the recording, storage and playback are not available for the cameras managed by VIGI Security Manager.

Log In

When no account is logged in, follow the steps below.

Click

Please log in.

on the top-right corner and enter your TP-Link ID and password. You can enable

Auto Login

to allow the utility to remember your account and log in automatically when switching it as the logged account. Click

Log In

.

Log In

I | Auto LoginNote: You’ II need to add the local device(s) again after the login.Forgot Password?

(Optional) Specify the description for the account. Click

Save

.

To log in with a new TP-Link ID, click the TP-Link ID on the top-right corner, click Add TP-Link ID, and then repeat the above steps.

Switch the Logged TP-Link Account

To switch the logged TP-Link account, click the TP-Link ID on the top-right corner and select an account from the drop-down list. If you have enabled Auto Login for this account, wait for switching. If not, enter the password to log in.

2 Manage Your TP-Link ID

On the Account Management panel, you can update the account information, change the order displayed on the top-right corner, and delete the account.

Note: The account that you log in with right now cannot be deleted. To delete it, switch the logged account first.

Follow the steps to manage your TP-Link ID.

Click the TP-Link ID on the top-right corner and click

Manage TP-Link ID

.

In the pop-up window, select an account, enter the new account information, and click

Save

. Use the icons to adjust the displayed order and delete the account.

3 Change the Password

To change the password of a TP-Link ID, log in with the TP-Link ID first. Click the TP-Link ID on the topright corner and click Change Password. Enter the current password and specify a new password. Click Save.

Change Password

4 Log Out the TP-Link ID

To log out the current account, click the TP-Link ID on the top-right corner and click Log Out.

Live View

In Live View, you can monitor the channels in real time and respond to abnormal conditions with quick operations, such as starting recording and zooming in the image. This chapter contains the following sections:

• Configure the Screen Layout

• Configure Live View Settings

• Add and Manage Groups

1 Configure the Screen Layout

1. 1 Enable/Disable Live View

VIGI Security Manager displays the videos of each channel via several screens. Follow the steps below to flexibly enable or disable Live View function on channels to play the real-time video.

Enable/Disable Live View for a Channel

To enable Live View for a single channel, click a screen in Live View and click the channel on the right panel.

To disable Live View for a single channel, click a screen in Live View and click s.

Enable/Disable Live View for Channels in Batch

For the cameras managed by the NVR or added to a group, you can enable or disable Live View for channels in batches. To create groups, refer to 4. 3 Add and Manage Groups.

Right click an NVR or group on the right panel and click Enable Live View for All Channels. Then, Live View will be enabled on all channels that are managed by the NVR or added to the group.

To disable Live View in batches, right click an NVR or group on the right panel and click Disable Live

View for All Channels.

1. 2 Rearrange the Layout

The manager supports ten layout modes, and each mode displays different numbers of screens. Click

to select a layout mode and click<1/16>to change the page.

For the layout mode with multiple screens, you can change the location of a channel by clicking and dragging it to another location. To view a channel in the full screen, double click it. Double click it again to go back to multi-screen layout mode.

2 Configure Live View Settings

2. 1 Configure Live View Settings via Toolbar

Click a screen in Live View and click the following icons to configure Live View settings, such as screenshot, digital zoom, and switching.

Click to switch between high quality (HQ) and low quality (LQ) for Live View.(Only for certain cameras) Click to turn on or off the volume.Click to take a screenshot. To show the screenshot in the folder, click a at the top right corner. To change the path where the screenshots are stored, refer to 6. 4 File Settings.Click to start/end the recording manually. To show the recording in the folder, click a at the top right corner. To change the path where the recordings are stored, refer to 6. 4 File Settings.(Only for the camera with Pan&Tilt) Click to enter the Preview of Pan&Tilt. You can adjust the camera location and call the presets.

Bl(Only for cameras with microphone) Click the icon and then hold □ to talk. With this function, your can talk to people in the monitor area in real time.Click the icon to turn your cursor into a magnifying glass. To zoom in, scroll up the mouse wheel or left click on the screen.

To zoom out, scroll down the mouse wheel or right click on the screen.Click Bl to start Switching, whereby the manager turns pages in Live View regularly if the channels are displayed in more than one page.Click s to end Switching.If you want to change the switching interval, click the triangle and then enter the value or drag the pointer.

Click to view the video in full screen,4. 2. 2 Configure Live View Settings for a Single CameraRight click a single camera on the right panel to configure the aspect ratio, delivery, stream and quality of its channel.RatioClick to adjust aspect ratio. If you select 100%, the screen will automatically adjust the ratio to fit the size of VIGI NVR Manager.

3 Add and Manage Groups

3. 1 Add Groups

Main groups and subgroups are used to classify the channels for easier management. You can enable or disable Live View for channels in the group simultaneously.

Note: When enabling or disabling Live View based on groups, this operation is not applied to the subgroups.

Follow the steps below to add groups.

Add a Main Group

To add a group, click Group and then click H on the right panel. Enter the group name, select channels listed in Available Channels, and click Add. Click Up or Down to adjust the display order, or click Remove to remove the channel from the group. Click Confirm to add the main group.

Add a Subgroup

To add a subgroup, click Group and right click a group on the right panel. Click Add Subgroup and enter the name. Then, you can drag the channel in the main group to the subgroup.

3. 2 Manage Groups

Manage Channels in the Group

To move a single channel to other groups or change its order in the list, drag the channel and move it.

To manage the channels, click Group and right click a group on the right panel. Click Manage Group Channels. Select the channels to add, remove or reorder them in the group. Click Confirm.

Rename the Group

To rename a group, click Group and right click the group on the right panel. Click Rename and enter the name.

Delete the Group

To delete a group, click Group and right click the group on the right panel. Click Delete.

5

Playback

This function allows you to play the history recordings and edit them, such as taking schreenshots and exporting clips. You can easily find the recordings based on the channel, date, and recording types. This chapter contains the following sections:

Playback the Recordings

Playback Operations

1 Playback the Recordings

Follow the steps below to start playback.

Click Playback on the top, and then click an NVR to select the channels from the right panel. Click

Apply.

Note: All the cameras managed by VIGI Security Manager directly are listed under the virtual NVR, and you can play the recordings of them only when the host manages them locally.

Select the date from the calendar. The blue points on the calendar mean that the channels have recordings on that day.

(Optional) Select the recording types by clicking the checkboxes of

Continuous Recording

and

Motion Detection Recordings

.

2 Playback Operations

In Playback, you can use the toolbar and time bar at the bottom to adjust the display, edit and export the recordings.

2. 1 Basic Playback Operations

□Click to rewind the recording. Click again to stop.aClick to fast forward the recordings. Click again to stop.in-Jump forward by 30 seconds.Select from the drop-down list to change the playing speed.Click the icon to turn your cursor into a magnifying glass. Scroll up/down the mouse wheel on the screen to zoom in/out.Click to turn on or off the volume.Click to take a screenshot. To open the saved path, click a at the top right corner. To change the saved path, refer to 6. 4 File Settings.Click to start/end the recording manually. To open the saved path, click a at the top right corner. To change the saved path, refer to 6. 4 File Settings.

Click to display/hide the channel number in Playback.

2. 2 Edit Recordings

Follow the steps below to clip video files.

1. In Playback, specify a channel and date to list the recordings in the time bar. Click s .

Move

11

on the time bar, or enter the start time and end time below to adjust the recording length. On the time bar, scroll up or down the mouse wheel to expand or contract the time line. Click

Export

.

Select an export format and click

Export

.

Note: This window will not pop up if you click Remember and don’t ask again or set the export format in Settings. For details, refer to 6. 5 Export Format.

6

Recording and Storage

This chapter guides you on how to export recordings and configure recording and storage settings for your cameras. VIGI Security Manager allows you to set recording schedule templates and apply these templates to different cameras. You can also check and configure the storage settings for recordings and exported files. This chapter includes the following sections:

Arrange Schedules for a Single Camera

Storage Management

Export Recordings

File Settings

Export Format

6. 1 Arrange Schedules for a Single Camera

Storage schedule section provides convenience and flexibility for the daily monitoring of your devices. You can enable and customize the recording schedule and storage settings for a single camera. Go to Settings > Storage Schedule to modify these settings.

Note: If you have logged in to your TP-Link ID, you can not arrange schedules for cameras. To modify these settings, log out of your TP-Link ID and manage devices locally.

Schedule

Filter Ql Batch Operation Ci Edit Schedule Ö Refresh

TP-Link Camera 3

® Record on Computer 24/7 Recording

Recording…

Record on Computer: Displays the cameras whose recordings are stored in the computer.

Filter

Record on SD Card: Displays the cameras whose recordings are stored in the SD card.

Ql Batch Operation

Enable/Disable record on your computer for all cameras.

rzi Edit Schedule

Click to edit schedule templates for recording.

0 Refresh

Click to refresh the camera list.

6. 1. 1 Customize Schedule Template

Recording schedules include 4 fixed templates and 4 custom templates. In Storage Schedule, click Q5 Edit Schedule on the top right to enter Edit Schedule Template.

24/7 Recording

24/7 Recording allows your camera to record continuously all the time.

24/7 Motion Detection

24/7 Motion Detection allows your camera to record when motion detection is triggered.

12h Weekday Recording

12h Weekday Recording allows your camera to record continuously from 8:00 to 20:00 on weekdays.

■

24h Weekend Recording24h Weekend Recording allows your camera to record continuously all day on weekends.Ptp-link VIGILive View Playback SettingsDevice4- Schedule » Edit Schedule TemplateDevice ListEdit ScheduleFirmware UpdateStorage24/7 Recording 24/7 Motion Detection 12h Weekday Recording 24h Weekend Recording Custom 1 Custom2 Custom 3 Custom 4Storage Schedule@ Continuous RecordingStorage ManagementExport RecordingsMonFile SettingsTueExport FormatWedThuFridaySatSunO Motion Detection Fixed template, Unable to edit.

Custom Schedule

You can customize the recording schedule according to your needs. For example, the camera will record based on a schedule of motion detection from 5:00-16:00 on weekdays; On weekends, the camera will record continuously from 1:30-23:00. Follow the steps below to finish the configuration.

Select a custom template (custom 1).

Click

Motion Detection

and drag the cursor on time bar to set 5:00 to 16:00 for continuous recording from Monday to Friday. The color of these rectangles will be changed to green.

Select

Continuous Recording

and drag the cursor to set 1:30 to 23:00 for motion detection recording on Saturday and Sunday. The color of these rectangles will be changed to blue. To enter the start and end time manually, click the time bar to select a rectangle first, then click the rectangle again.

Click

Save

.

1. 2 Configure Storage Settings

If you have not enabled recording function when adding the camera to VIGI Security Manager, follow the steps below to configure the storage settings. If you have already enabled this function, you can skip this section.

1.tp-link 1 VIGIEl • O O – □XLive ViewPlaybackSettingsPlease log in.DeviceScheduleTP-Link Camera 3Device ListFirmware Update

Click the camera you want from the list.

Storage

Storage Schedule

Storage Management

Export Recordings

File Settings

Export Format

2.Click Enable Record on Computer to configure storage settings.

3. Set the storage and recording settings.

Click

Confirm

.

6. 1. 3 Configure Recording Schedule and View Storage Settings

You can check storage settings and apply the schedule templates to the cameras directly added to VIGI Security Manager.

Note: The recording schedule of camera set on VIGI Security Manager will not be synchronized if you add this camera to your NVR later.

To apply the recording schedule to the camera, follow the steps below:

Go to

Settings

>

Storage Schedule

, and click the camera you want to configure.

Enable

Record on Computer

.

Click

la

Use

Template

to select the schedule template according to your needs.

Note: Only the cameras supporting motion detection function can apply the schedule of motion detection.

Set the storage and recording settings.

5. Click Save.

2 Storage Management

To check the storage settings of your cameras directly added to VIGI Security Manager, go to Settings > Storage Management.

Note: If you have logged in to your TP-Link ID, you can not modify storage settings. To modify these settings, log out of your TP-Link ID and manage devices locally.

DeviceDisplays the name of camera.

Storage LocationTotal Storage CapacityEnable Loop RecordingClear Recording

Displays the location where recordings are stored.

Displays the capacity for storing recordings.

Displays the status of loop recording.

Click to delete all the recordings stored on your computer.

3 Export Recordings

To export the recordings of the NVR and cameras according to your needs, go to Settings > Storage > Export Recordings and follow the steps below.

Note: If you have logged in to your TP-Link ID, you can not export recordings. To export recordings, log out of your TP-Link ID and manage devices locally.

■ Export Recordings From NVR

Select the NVR you want and specify the channel from the drop-down list, select date and recording

type, then click Search to filter files.

Select the export mode.

Speed Mode: The export process is faster than that of compatibility mode.

Compatibility Mode: The exported recordings will be transcoded to H.264 which is compatible with

various digital products.

5. Click Export and the files will be successfully exported.

■ Export Recordings From Camera

Select the camera you want and the recording source from the drop-down list, select date and recording type, then click

Search

to filter files.

2. Select the recording files you want to export and click C3 Export

Click

Browse

to select the folder on your computer to store the exported files.

Select the export mode.

Speed Mode: The export process is faster than that of compatibility mode.

Compatibility Mode: Transcode the exported recordings to H.264 which is compatible with various digital products.

Click

Export

, and the files will be successfully exported.

4 File Settings

You can select the storage location for the screenshots, videos recorded in playback and video clips. Go to Settings > Storage > File Settings and click Browse to select the path. After you click Save, three folders, Picture, Video and Cloud, will be automatically created to store the corresponding files.

5 Export Format

You can set the export mode in advance to simplify the export process.

Ask before each exportYou should select the export mode every time before exporting files.

Skip the pop-up window of export mode when exporting files. All the files will be exported using the selected mode.

Compatibility Mode: The exported recordings will be transcoded to H.264 which is compatible with various digital products.

Configure Your Cameras and NVRs

This chapter guides you on how to configure cameras and VIGI NVRs added to VIGI Security Manager. You can configure events on cameras, the information, display parameters and network settings of devices. For VIGI Security Manager, You can also check and configure system settings and upgrade its firmware. This chapter includes the following sections:

View Device Information

Configure Basic Information

Configure Display Information

Configure Video

Configure Events (Only for Cameras)

Configure Network Settings

Cloud Service

Configure System Settings

Upgrade the Firmware

Remove Devices

1 View Device Information

In Device List, all devices added to VIGI Security Manager are listed. If you have logged in with your TP- Link ID, only the devices bound with the TP-Link ID are listed.

7. 1. 1 View Device Information

Go to Settings > Device List > My Devices and click s in the list. Click Device Info. The following information are listed in the window.

1. 2 View System Logs (Only for Cameras)

System Logs are used to record the messages of cameras. To view system logs, go to Settings > Device List > My Devices and click s in the list. Click System Logs on the left. Select a time range and click Search. The logs recorded in the time range will be listed in the table.

If needed, you can click Clear to delete all the logs.

2 Configure Basic Information

You can modify the device name and channel name (only for NVR) in Basic Information. For local devices, you can also modify the password.

Note: To modify the password, log out the TP-Link ID first.

Go to Settings > Device List > My Devices and click 0 in the list. Click Basic Information. To modify the name, enter the name and click Save. To modify the password, click Modify, enter the password and email address, and click Confirm.

VIGI NVR1008H(UN) 1.0

Basic InformationBasic Information

► Display InformationGeneral

► Video

Device NameVIGI NVR1008H(UN) 1.0

Network Settings

Channel 1 NameTP-LINK IPC

Cloud Service

System Settings

Account Information

ModifyPassword

3 Configure Display Information

In Display Information, you can configure the image effects, specify the privacy areas, and decide the information to display on the screen.

3. 1 Configure Image Effects

In Image, you can configure the parameters and functions to adjust the image effects.

Follow the steps below to configure image settings.

Go to

Settings

>

Device List

>

My Devices

and click

o

in the list. Go to

Display Information

>

Image

.

Configure the parameters and functions.

• For cameras, configure the following parameters and functions.

• For NVR, select a channel and configure the following parameters.

If you want to reset to the default settings, click Reset.

3. 2 Configure Privacy Mask

In Privacy Mask, you can set privacy area in the image. The area cannot be recorded and monitored.

Follow the steps below to configure Privacy Mask.

Go to

Settings

>

Device List

>

My Devices

and click

V

in the list. Go to

Display Information

>

Privacy Mask.

Enable Privacy Mask, select a channel (only for NVR), and draw the privacy areas on the preview screen (the dark squares in the picture below). Use the mouse to adjust the size and location of areas. To remove a certain privacy area, select it and click

Delete

. To remove all privacy areas, click

Clear

.

Click

Save

to finish the configuration.

If you want to reset to the default settings, click Reset.

3. 3 Configure OSD

In OSD, You can configure OSD (On Screen Display) to edit the information displayed in Live View and recordings.

Follow the steps below to configure OSD.

Go to

Settings

>

Device List

>

My Devices

and click

4

in the list. Go to

Display Information

>

OSD

.

Select a channel from the drop-down list (only for NVR), configure displayed information and display effects. Click and drag the information in the preview screen to adjust the place. Click

Save

.

Date/Day Click to display or hide the time information.

Channel Click the checkbox and enter the channel name to be displayed.

Note 1/2 (Only for cameras) Click the checkbox and enter the note to be displayed.

Display Effect Select a display effect to display the information.

Font Size/Color (Only for cameras) Select the font size and color of displayed information.

If you want to reset to the default settings, click Reset.

4 Configure Video

The NVRs and cameras supports two stream levels, main stream and substream, which determine the video parameters of live view and playback, such as resolution, image quality and so on. You can configure the stream settings and apply them to the NVR and cameras added to VIGI Security Manager. For cameras directly added to VIGI Security Manager, you can draw an area for your special concern and the image quality of this area will be better.

4. 1 Configure Stream Settings

Stream settings can be adjusted to increase or decrease recording resolution and fluency. They also impact recording file size and available recording bandwidth. To select the main stream or substeam, go to Live View, right click the camera in the device list or the Live View screen, and click Stream.

Follow the steps below to configure the stream settings.

Go to

Settings

>

Device List

>

My Devices

and click in the list. Go to

Video

>

Stream

.

Configure the parameters of main stream and substream based on your needs.

ResolutionFrame RateSmart CodingSpecify the resolution of the video stream. The screen displays images more clearly when the resolution increases.

Specify the frame rate of videos. The video is more fluent when the rate increases.

Enable Smart Coding to improve compression performance. The size of recording files will be smaller and recordings will use less bandwidth.

Bite RateSelect a type of bit rate.

VBR: The bit rate changes with the image within Maximum Bit Rate.

CBR: The bit rate is Maximum Bit Rate all the time.

Image QualityWhen VBR selected as the bit rate type, set the video quality as high, medium, or low.

Max. Bit RateWhen VBR selected as the bit rate type, specify the upper limit of bit rate.

When CBR selected as the bit rate type, specify the bit rate.

Click

Save

.

7. 4. 2 Configure ROI (Only for Cameras)

In ROI (Region of Interest), you can configure the interest level of a specified area in each camera. The level ranks from 1 to 6, and the higher the ROI level, the better image quality.

1. Go to Settings > Device List > My Devices and click in the list. Go to Video > ROI.

Enable ROI.

Select the stream type and draw an area on the preview screen (the yellow square in the picture above). Use the mouse to adjust the size and location of areas.

Specify the ROI level and click

Save

.

5 Configure Events (Only for Cameras)

VIGI Security Manager allows you to configure the event settings for cameras to detect different types of events. You cameras monitor the user-defined areas and you’ll be automatically alerted to any suspicious activity in your home and office.

It is recommended to bind the cameras to your TP-Link ID and log in to your TP-Link ID on VIGI Security Manager before setting the events. To bind your devices, go to Settings > Device List > My Devices

and click in the list. Then go to Network Settings > Cloud Service. You can receive alerts on your phone after you download VIGI app and log in with your TP-Link ID.

5. 1 Configure Basic Events

■ Motion Detection

Motion detection allows cameras to detect the moving objects in the monitored area and triggers alarm actions. You can draw the monitored areas and customize the motion detection settings. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > My Devices and click in the list. Go to Event > Basic Event.

Click

Motion Detection

on the top right and enable

Motion Detection.

Adjust the sensitivity of motion detection. A higher value can trigger the motion detection more easily.

Draw the areas on the preview screen. If you click

Full Area

, the entire live view screen will be selected.

Click

Save

.

■ Camera Tampering

Camera tampering is triggered when an area of camera’s lens is blocked, obstructed or vandalized. You can customize the camera tampering settings. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > My Devices and click in the list. Go to Event > Basic Event.

Click

Camera Tampering

on the top right and enable

Camera Tampering.

Adjust the sensitivity of camera tampering. A higher value can trigger the camera tampering more easily.

Click

Save

.

5. 2 Configure Smart Events

■ Line Crossing Detection

Line crossing detection is triggered when cameras detect that moving objects cross a customized virtual line. You can customize the line crossing detection settings and set the schedule for them to take effect. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > My Devices and click in the list. Go to Event > Smart Event.

Click

Line Crossing Detection

on the top right and enable

Line Crossing Detection.

Click

Schedule

. Click the time bar and enter the start time and end time manually. Click

Save

to save the week schedule for line crossing detection.

Draw lines on the preview screen. Select the area and configure its settings. The maximum number of customized lines is 4.

Click

Save

.

■ Area Intrusion Detection

Area intrusion is triggered when the camera detects an intrusion in the specified areas. You can customize the area intrusion settings and set the schedule for them to take effect. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > My Devices and click in the list. Go to Event > Smart Event.

2. Click Area Intrusion on the top right and enable Area Intrusion.

Click

Schedule

. Click the time bar and enter the start time and end time manually. Then click

Save

to save the week schedule for area intrusion detection.

Draw areas on the preview screen. Select the area and configure its settings. The maximum number of customized areas is 4.

Click

Save

.

5. 3 Configure Exception Event

Exception event sets the maximum login attempts to protect the security of your cameras. VIGI Security Manager will be locked for 30 minutes if you enter the wrong password of your camera more than the specified attempts. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > My Devices and click in the list. Go to Event > Exception Event.

Enable

Login Error Detection

on the top right.

Set

Max Login Attempts

. The range is from 3 to 10.

Click

Save

.

6 Configure Network Settings

In Network Settings, you can configure the IP address, MTU (Maximum Transmission Unit). For cameras not managed by the NVR, you can also configure the management ports and enable advanced functions, such as Port Forwarding, IP Restriction and Multicast.

6. 1 Basic and Advanced Network Configuration

In Network Configuration, you can configure the device to obtain an IP address automatically or assign a static IP address to it. If needed, you can also modify MTU.

Follow the steps below to configure the network.

Go to

Settings

>

Device List

>

My Devices

and click

<1

in the list. Go to

Network Settings

>

Configuration

.

Configure basic settings to configure the IP address.

• To assign a static IP address to the device, select Static IP as the mode and configure the following parameters.

GatewayEnter the IP address of the gateway device. This IP address should be in the same segment as the device’s IP address.

• To configure the device to obtain a dynamic IP address, select DHCP as the mode.Note: A DHCP server (usually a router) is needed for the device to obtain a dynamic IP address.Preferred/Alternate DNS Enter the IP address of the DNS server.

(Optional) Specify MTU (Maximum Transmission Unit) to decide the largest size of data unit that can be transmitted in the network. A larger unit can transmit more data in each packet, but it may increase the network delay because it needs more time to transmit.

Click

Save

.

6. 2 Configure Port Number (Only for Cameras)

In Port Number, you can configure the HTTP port, RTSP port and service port that can be used to access the camera through the network. Also, the ports configured here are used for communications of corresponding protocols.

To configure ports, go to Settings > Device List > My Devices and click Q in the list. Go to Network Settings > Port Forwarding. Configure the ports and click Save.

HTTP Port Specify a port for HTTP protocol.

RTSP Port Specify a port for RTSP protocol.

Video Service Port Specify a port for protocols of video services.

If you want to reset to default settings, click Reset.

6. 3 Configure Port Forwarding (Only for Cameras)

Port Forwarding is used to establish the mapping between the internal port and external port. When Port Forwarding is enabled, you can access the device and watch the videos when accessing the external port remotely.

Note: The device should be connected to the internet, and Port Forwarding should be enabled on the gateway.

Follow the steps below to configure Port Forwarding.

Go to

Settings

>

Device List

>

My Devices

and click

O

in the list. Go to

Network Settings

>

Port Forwarding

.

Enable Port Forwarding and specify a mapping type. If you select

Auto

as the mapping type, the mappings are established automatically. If you select

Manual

as the mapping type, click

e

to specify the external port.

Click

Save

.

With Port Forwarding enabled, you can remotely watch the videos with the URL rtsp://A.B.C.D:Port/ streamN, for example, rtsp://10.0.1.47:28736/stream1. A.B.C.D is the WAN IP address of the gateway, and Port is the number of RTSP external port. N can be number 1 or 2 that indicates the stream, 1 for main stream and 2 for substream.

If you want to reset to default settings, click Reset.

6. 4 Configure IP Restriction (Only for Cameras)

When IP Restriction is enabled, you can add IP addresses to the deny list or allow list to restrict the access to the camera. The IP address in the deny list cannot access the camera, while only the IP addresses in the allow list can access the camera.

Follow the steps below to add an IP address to the deny or allow list.

Go to

Settings

>

Device List

>

My Devices

and click

4

in the list. Go to

Network Settings

>

IP Restriction

.

Enable IP Restriction and select

Deny List

or

Allow List

. Click

Add

to enter the IP address and description. Click

Save

. Then the IP address is in the corresponding list.

Click

Save

in IP Restriction to finish the configuration.

If you want to reset to default settings, click Reset.

6. 5 Configure Multicast (Only for Cameras)

When Multicast is enabled, you can watch videos using the multicast address and port.

Follow the steps below to configure Multicast.

Go to

Settings

>

Device List

>

My Devices

and click

G

in the list. Go to

Network Settings

>

Multicast

.

Select a stream and then enable Multicast. For the multicast address and port, you can disable Random IP Port and specify a static address and port, or enable it and use a random one. Click

Save

.

After Multicast enabled, you can watch the video with the URL rtsp://A:B:C:D/multicastStreamN, for example, rtsp://192.168.0.3/multicastStream1. A.B.C.D is the IP address of the camera, and N can be number 1 or 2 that indicates the stream, 1 for main stream and 2 for substream.

If you want to reset to default settings, click Reset.

7 Cloud Service

VIGI Security Manager supports remote management with the support of TP-Link Cloud Services. With a TP-Link ID bound, you can remotely monitor your property through cameras on your computer.

If you want to bind or unbind your devices with your TP-Link ID, follow the steps below to finish the configuration.

Go to

Settings

>

Device List

>

My Devices

and click

0

in the list. Then go to

Cloud Service

and click

Log in

.

You can enable Auto Login to allow the utility to remember your account and log in automatically when switching it as the logged account. Click

Log In

.

Click

Bind

to bind all the devices added locally to your TP-Link ID. All the local devices will be bound automatically to your TP-Link ID.

(Optional) After finish binding the devices, click

Unbind

if you want to unbind a certain device from your TP-Link ID.

8 Configure System Settings

The system settings allow you to modify the name and password, set the time and reboot schedule for your devices. To configure system settings, go to Settings > Device List and click 0 in the list.

8. 1 Configure Basic Settings

To modify the device name, channel name (only for NVR) and passwords of devices, go to Settings >

Device List and click in the list. Then go to System Settings > Basic Settings.

XVIGI NVR1008H(UN) 1.0

Basic Information

Basic Information

► Display Information

► Video

Network Settings

Cloud Service

► System Settings

General

You can click Modify to change the password and email address for password reset.

Note: You can only modify the password of local devices.

8. 2 Configure Time Settings

VIGI Security Manager provides two methods to modify the system time. To configure time settings, go to Settings > Device List and click o in the list. Go to System Settings > Time Settings.

Get Time from the Internet

VIGI devices can use NTP (Network Time Protocol) to automatically get the system time from the Internet. You can also customize the NTP Server Address if you don’t want to get the time from the default NTP server address provided by NVR. Then select the time zone according to your region.

VIGI NVR1008H(UN) 1.0

Basic InformationDisplay InformationVideoNetwork SettingsCloud ServiceSystem SettingsBasic SettingsTime SettingsRebootTime SettingsDevice Time:Time Settings:Time Zone:NTP Server :Save2020-09-13 06:55:0 0@ Get from Internet O Manually(UTC-00:00) Dublin. Edinburgh. Lis v0.0.0.0(Optional)

Set Manually

You can set the device time manually or click Get From PC to synchronize the device time with that of your PC.

8. 3 Reboot Device

To reboot your devices instantly or set the reboot schedule, go to Settings > Device List and click o in the list. Go to System Settings > Reboot.

If you want to reboot your device based on a schedule, enable Scheduled Reboot and customize the schedule according to your needs.

9 Upgrade the Firmware

VIGI Security Manager allows you to upgrade the firmware of your device automatically or manually. To upgrade a device solely or upgrade them in batches, go to Settings > Device > Firmware Update.

^tp-link I VIGI«bee – □XLive ViewPlaybackSettings-Please log in.O RefreshFirmware Updatet Update Manually T Auto UpdateDeviceDevice ListZU No.

Device Name□ 1VIGI NVR1008H(UN) 1.0Firmware UpdateHardware VersionFirmware VersionStatus OperationStorageVIGI NVR1008H(UN) 1.01.0.1 Build 200722 Rel.70379n OnlineAuto UpdateUpdate ManuallyStorage ScheduleStorage ManagementExport RecordingsFile SettingsExport FormatAuto UpdateSelect a device and click Auto Update to automatically upgrade your device.

Update ManuallySelect a device and click Update Manually. Then import the update file and click Updatei Update ManuallyClick the checkboxes before devices and click T Update Manually to automatically upgrade your devices.T Auto UpdateClick the checkboxes before devices and click T Auto Update . Then import the update file and click Update.

10 Remove Devices

To remove the devices from your VIGI Security Manager, follow the steps below.

Go to

Settings

>

Device List

.

Click the checkbox of devices and click Delete.

3.

Click Delete.

8

System Management

This chapter guides you on how to view and manage the system of VIGI Security Manager. You can check the storage and CPU usage, configure system settings and update the software.

/3tplink I VIGIFl

You can check the storage and CPU usage, configure system settings and update the software on the top right corner.

is • e o – □ x

Hover the cursor above the icon to check the storage usage.

Hover the cursor above the icon to check the CPU usage.

Click the check box to configure the following system settings.

Run at Windows Startup: Makes the software run automatically when your computer starts up.

Enable Hardware Decoding: Allows your GPU (Graphics Processing Unit) to process certain video data, which will take load off the CPU and make the application run smoother.

When Closed: Choose to exit or minimize to tray when clicking

Click to check the software version and update VIGI Security Manager.

CORTROL Global is one of the market’s most comprehensive enterprise-level VMS solutions, featuring interactive maps linked to alarms, an exceptional event and action manager, analytics tools, video wall support, and proactive components. In addition, the edge recording ensures your data safety by synchronizing with IP storage devices, archive replication, advanced system health monitoring, and failover, which reduces the disruption of your video surveillance recordings to zero. All this, plus various customization possibilities and Ganz’s excellent technical support.

With CORTROL Global, you can optimize the command center’s video wall. Create custom configurations or force users to specific video walls. For example, create “Area Focused” video walls to review footage quickly.

• Highly secure encrypted camera and client communication
• Powerful event and action manager
• Real-time geolocation / map / mobile tracking
• Multiple access control integrations, including Feenics Keep , Keri^® Systems Doors.net , Gallagher Command Center , NAPCO Continental , and more
• Cloud, VM Environments supported
• Powerful FR, LPR, AI, and UICC modules
• Intuitive configuration and deployment features will have your network up and running quickly and simply.
• Advanced features: event & action manager, powerful analytics: FR, LPR, VCA, 64-bit core, integrations/API maps & mobile streaming
• Supports  15, 000+ models of network cameras and network video servers from over 190+ manufacturers

Full HD and UHD Resolution
Stream up to 4k and 8k resolution.

Advanced Event and Action Manager
Specify the desired outcome of your video surveillance system’s operation. Determine how the software reacts to any event caught on camera and how it turns events into an automated process. For example, send emails, activate DI/DO, interact with any other software, or bring the operator’s attention to a camera that requires immediate action. This functionality can be used for a single event or a set of sequenced circumstances to eliminate false alarms and improve the efficiency of your surveillance system.

Multiple Integrations
CORTROL is engineered to unify Video Surveillance, Access Control, Video Analytics, IoT Sensors (vaping sensors, bullying, and gunshot detectors ), license plate recognition , deep cloud learning , intercom communications, biometrics, and other IP Systems to provide real-time situational awareness. Go to the integration section>>

CORTROL Video Analytics (CVA)
Advanced computational neural network engine provides AI analytics to any camera in your system. For example, create Zones/Lines to alert on perimeter intrusion, loitering, and AI Classification of persons, vehicles, and animals. Become efficient with the information you see. Take advantage of the full potential of your video surveillance system with video content analysis. Improve the functionality of your surveillance while analyzing large amounts of data to determine a specific pattern in a particular task. 

Smarter Business Security
CORTROL connects video, locks, card readers, or door contacts via Cloud, delivering versatility to smart business security –  all at a very economical cost.  CORTROL Global is engineered for medium and large enterprise business space.

Maps
Maps provide a complete examination of the entire installation of cameras, delivering immediate visual verification. All the alerts are integrated with the maps and can be set up to be viewed on the overview as well — you can specify the location of the alarm event immediately.

Web Access
Get permanent access to live streaming and archive video through your web browser.

Information Channels
Streaming branding, informational or urgent announcements

Alarm Acknowledgement
Make sure that no event skips the attention of the operator. An operator must confirm all alarms, automatically generating a bookmark towards the event in the archive. By requiring the operator to record actions in a journal, there is a tracking of performed actions towards each event.

Integrations and API
CORTROL offers customizable integration with other software systems in the form of a software development kit (SDK), CORTROL RESTful API.

Mobile Applications
You can use your mobile device to access live and archived streams. Use PTZ presets, control 2-way audio, or the mobile phone camera to stream video and audio directly to the server.

Live Streaming
The streaming server can make a live cast of videos on a website or YouTube.

Edge Recording
You can synchronize all your data with IP device storage. With this feature, if the network connection with any camera is lost, the camera still records your data. It is fully transferred to your server as soon as the network connection is re-established.

GANZ CORTROL VMS Setup Guide

Read Next :

• GANZ DMS Lite User Manual
• TP-Link Pharos Series Installation Guide
• Turing SMART Station Installation Guide

Ganz CORTROL is also available in the following editions:

• CORTROL Premier – Standalone System 24Ch / 48Ch / 72ch / 96ch

Learn More About Ganz CORTROL VMS Editions and Features.

Reiated settıngs

Addıtıonal admmıstnMıve tooB

Bıtlocker settıngs

Device Manager

System ınto

Have a question?

Get help

Make Window$ betten

G™e us feedback

1. CORTROL Prerequisites

There are a few requirements for the system the GANZ CORTROL Client will run on.

The ports for remote connections should be enabled through the firewalls (default ports are 60554 for the GANZ CORTROL Client)

The Bit version of Windows, 32-Bit vs. 64-Bit on the PC/Server should be confirmed.

For Windows 7: To confirm your Windows bit version, go to Control Panel > System and confirm System type as 32-Bit or 64-Bit.

For Windows 10: To confirm your Windows bit version, go to “Settings > System and confirm System type as 32-Bit or 64-Bit.

© Home AbOUt

Si Windows10

O Dısplay ^ni,me bdenmeade2

Rename thıs PC

□ Notmcatıons & actıons

,_K _ „ , _ Orgamzatıon CBCAMER1CA

O Power & sleep

Managc o» dBconncct from worfc or school

O Battery Edrtıon Windows 10 Pro

= storage Versıors ¹⁷⁰³

OS Boild 15063.483

Cg Tablet mode ProductlO 00342-50721-92491-AAOEM

O Multıtaskıno Processor Intel(R) CorefTM) İ7 6600U CPU ® 260GHz 2S1

GHz

& Projecting to thrs PC ınstalled RAM 8.00 GB (736 GB usabte)

System type 64-bit operabng system, x64-based processor

X Shared expetıences _{Pen ând |oucf)} j*, _{or t0UC}h mput ıs avaılable «or thıs dısplay

O About Change product key or upgrade your edition of Wındows

Read the Prıvacy Statement for Wındows and Microsoft Services

Read the Microsoft Services Agreemcnt that applies to our Services

Rcad the Microsoft Softvrare Ucense Terms

1. CORTROL Client Installer

The CORTROL Client Installer can be found at Ganz Security/Software includes both the CORTROL Management Console, and the CORTROL Client installer.

From the link please select and download either CORTROL Console 32bit or 64bit, depending on the Windows OS bit version of the host server.

For convenience, links to the 32Bit, and 64Bit versions of the CORTROL Console are provided below.

Note: For most browsers, any downloaded files can be found in the Windows Download folder.

I

/* GANZ

JyCDRTRDL Client 32Bit

İ

Z GANZ

y’CORTROL Client 64Bit

^v — J

1. Client Installation

• Navigate to the Microsoft Windows download folder.
• Double click on the CORTROL Client installer, to begin the installation process.
• Select the installation language and click Next.
• Accept the terms of agreement and click Next.
• Accept default installation location and click Next. (Change location destination if required.)
• Select the needed application language and click Next.
• Once installation is complete, click Finish.

1. Client Configuration

To launch the CORTROL Client interface, double click on its desktop icon. H

The Client will require configuration, to connect to the CORTROL Global Demo Server.

• Select “Disconnect”, as no server is currently configured.
• Select “Connection” located in the top right corner.

• Select the “Local Server” listed under “Connections, and then select “Edit”
• Leave the default “Server title”
• For the “IP address and port” enter: 173.42.78.61 – Leave the default port at 60554.
• Enter “demo” all lower case for the “Username”
• Enter “2468” for the password.
• Select “Remember Password” and then click on “Save”.
• Select the “Local Server” listed under “Connections” and then click on “Connect”.
• Click on the “X” to close / exit, “Connections”

CORTROL Client Download

V2.0.3

The “Demo” user have been giving no restriction on functionality within the GANZ CORTROL Client.

Please reference the CORTROL Client Manual for navigation, and usage.

CORTROL Client Quick Guide

v1.0.2

Main window

The main window displays content provided by the server, which depend upon the selected tab. Please see the corresponding sections of this document for detailed information about each mode.

The Ganz CORTROL Client application window title displays window name, display number, and computer station name.

Upper right corner – window controls

From this panel, the Ganz CORTROL Client application window can be:

• Opened in full screen mode
• Minimized to taskbar
• Maximized/restored to default size
• Closed

To enter full screen, F11 can also be used; to exit full screen mode, press Escape or F11 on the keyboard.

Upper panel – tabs

I I Live £> Playback Sequence Smart search /A Alerts pa~| Library

The upper panel contains tabs that allow you to quickly switch between main software functionality. The following tabs may be available, depending on the software version:

• Live: real-time video
• Playback: recorded video
• Sequence Explorer: recorded video analysis
• Smart Search: recording motion video analysis
• Alerts: generated alerts
• Library: exported video and snapshots

Upper panel – server connections

S Connection (1 servers)

The Connection button opens server connection setup window and displays the number of currently configured servers.

Upper right: main menu

File Edit View Help

This section contains the main application menu items.

• File; Exit: close the Ganz CORTROL Client Application
• Edit; Settings: application settings
• View: operation modes

o Always on top

o Exclusivity Mode

o Locked application

Help; About: about Ganz CORTROL Client

Server Connections

If you wish to connect to a remote server, follow the steps below.

Select the Connection section in the upper panel to bring up the dialog box.

Select a server by clicking it in the item list and click Connect to connect with the selected server. Server resources will automatically appear in the left-hand panel.

Click Disconnect in this same dialog box to log out from the selected server.

Video Channels

Each video displayed in live view is placed into a ‘slot’, a part of the layout, called viewport.

X rf* Traffic Cam

Lower-left: Stream details

i f H.264 VGA 30FPS 2.5 Mb/s

Enabled items are highlighted yellow:

Upper-left: general viewport controls

o X: close the stream and free the viewport

o Lock: unlocked/locked (Unlocked video in can be replaced by other cameras)

o Camera name: Name given the camera

Upper-right: Current time on the server from which the device originates

o Recording status: X = not recording, yellow arrow = recording

o Motion detector status: running = motion present, standing still = no motion

o Video codec of the stream: H.264, MJPEG

o Picture resolution: XVGA, 2.8MP

o Stream frame rate: xFPS

o Stream bitrate: xKb/s, xMb/s

Lower-right: Controls

o Instant playback: Playback of currently select time, (Default, last five minutes)

o PTZ toggle: PTZ HUD and bottom panel ON/OFF

o DPTZ toggle: Toggle digital PTZ control

o Motion grid: ON/OFF

o Substream: Auto/main/substream

o Incoming audio: ON/OFF

o Audio OUT: Press and hold the microphone to speak

o Aspect ratio: Auto/stretch to fill viewport/original

o Notification panel toggle: Toggle display of device centric notification panel

o Bookmark: Bookmark current selection of time for later retrieval, review

o Snapshot: Export snapshot of current image to library

Bottom: PTZ controls

• Presets Tours: Listing presets, with option to initiate tour
• HUD (Heads Up Display): ON/OFF (Centre: PTZ HUD controls) o Pan and tilt arrows

o Zoom slider

o Iris slide (If camera supported)

o Focus slider (If camera supported)

Instant Playback

The following overlay controls are available in the instant playback mode:

Camera Center: Play/Pause

o Drag to the center of the line to pause drag right to go fast forward o Drag left to rewind fast

o Release from dragging to continue normal playback

Bottom right: Controls

o Place: Click to play

o Clock icon: Specify time, date/hours/minutes

o Bookmark: Bookmark current selection of time for later retrieval, review

o Snapshot: Snapshot of current image, saved automatically

o Archive: Export loaded footage displayed in timeline

Bottom: Navigation

1/9/2017 L

4:5607 PM

11/9/2017

5:01:07 PM

o Left/Right <> arrows: Adjust loaded video time boundaries (Default, last five minutes) ■ Drag right to go forward in time drag left to go backwards in time

o Vertical yellow line: Indicates current playback moment, ■ Drag it anywhere or click to move along the timeline

Playback (Archive) Mode

For security reasons, it has been made impossible to erase recordings from individual channels and/or time periods. Recordings

Select Playback tab to switch to archive playback mode. Your current layout will be used, and recorded video streams will be displayed for channels with enabled recording.

• Layouts: Double-click your desired layout to load it
• Layout templates: Double-click your desired layout template to load it
• Channels:

o Double-click or drag and drop the channels of your choice to fill the viewports

o First empty viewports are filled; then non-locked channels are replaced one by one)

o Each channel can be expanded to access recordings of its main or secondary stream.

o All footage having no associated active channels will be available under Orphan archive tracks.

The following viewport overlay controls are available in the playback mode, upon selection of a viewport:

• Upper left:

o X: close the stream and free the viewport

o Lock: unlocked/locked (Unlocked video in this viewport can be replaced by other cameras)

o Camera name: Name given the camera

• Lower-right: Controls

o DPTZ toggle: Toggle digital PTZ control

o Aspect ratio: Auto/stretch to fill viewport/original

o Motion grid: ON/OFF

Playback timeline

Right below the video stream, the Timeline is displayed:

• Time intervals: Show the timeline scale;

o Click and drag left/right to move the timeline

• The video footage outline is shown twice:

o Upper timeline: Contents of currently selected stream, with corresponding channel name

o Lower timeline: Content summary for all channels currently present in the viewport layout

• White line: Indicates recorded video data
• Cyan line: (A little bit wider than the white line) indicates recorded motion data
• Blue line: (A little bit wider than the cyan line) indicates recorded incoming audio data
• Yellow vertical line: Denotes current playback position

Playback Navigation controls

The playback navigation controls are located at the bottom of the window:

• Timestamps: Timeline start and stop
• Left/Right <> arrows: Adjust the loaded footage time boundaries (Default, last five minutes) o Drag right to go forward in time drag left to go backwards in time

Motion Search:

Left/Right <> arrows move forward or back to next recorded motion

Playback Navigation:

o Use the Play/Pause button to start playback

o Use the <> arrows near the Play button to go one frame back/forward

o -/+ steps: click to go back/forward with a step of 5 seconds, 1 minute, 1 hour or 24 hours o |< >| arrows: go to the very beginning/very end of the footage

• Playback speed:

o Drag the blob to adjust playback speed from +/-0.5x to +/-32x

o The Pause button duplicates the main pause control

• Clock icon: Specify time, date/hours/minutes
• Bookmark: Create bookmark for later retrieval, review
• Snapshot: Snapshot of current image, saved automatically
• Multi-Snapshot: Snapshot of all channels currently present in the viewport layout
• Archive: Export loaded footage displayed in timeline

o Option of multi-channel, or single channel archive export

Conventions

When using this guide, notice that:

• Features available in VIGI Security Manager may vary due to your region, device model, and firmware version. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.
• The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Users must take full responsibility for their application of any products.
• This guide uses the specific formats to highlight special messages. The following table lists the conventions that are used throughout this guide.

VIGI Security Manager Setup Guide

Read More :

• Gamut Surveillance Client Guide
• Comfast Long Range WiFi Access Point Setup
• How to Setup Email Notifications via Gmail

More Information

• For technical support, the latest version of the User Guide and other information, please visit https://www.tp-link.com/support.
• To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.

Get Started with VIGI Security Manager

This chapter guides you on how to install VIGI Security Manager and choose the network topology based on your needs. VIGI Security Manager offers easy and efficient management for security cameras and VIGI Network Video Recorder. This chapter includes the following sections:

Install VIGI Security Manager

Determine the Network Topology

Chapter 1

Get Started with VIGI Security Manager

With a reliable network management platform powered by VIGI Security Manager, you can watch the live view and playback, add devices, configure events, set recording and storage schedule for cameras, and export recordings to your computer.

V 1. 1 Install VIGI Security Manager

VIGI Security Manager is provided only for Windows operating systems. Make sure your PC’s system meet the following requirements, then properly install the VIGI Security Manager.

• System Requirement

Operating System: WinXP/Win7/Win8/Win8.1/Win10. (We recommend that you deploy VIGI Security Manager on a 64-bit operating system to guarantee the software stability.)

• Install VIGI Security Manager

Download the installation file of VIGI Security Manager from the website. Then follow the instructions to properly install the VIGI Security Manager. After a successful installation, a shortcut icon of the VIGI Security Manager will be created on your desktop.

2

Chapter 1

Get Started with VIGI Security Manager

V 1.2 Determine the Network Topology

The network topology that you create for VIGI Security Manager varies depending on your requirements.

The following figures show two typical application scenarios.

■ Use VIGI Security Manager in Local Network

Internet

VIGI Network Video Recorder

CI-

VIĞI Security Manager

When the computer is in the same subnet as your cameras and VIGI Network Video Recorder, download and install VIGI Security Manager on your computer to watch the live view and playback, add devices from the discovered list, manage devices, set recording and storage schedule for cameras and export recordings to your computer.

3

Chapter 1

Get Started with VIGI Security Manager

■ Use VIGI Security Manager Remotely

VIGI Camera

VIGI Camera

Internet TP-Link Switch

VIGI Network Video Recorder

CI­

VIĞI Security Manager

If you want to monitor your home or office while away, you can download and install VIGI Security Manager on a computer connected to the internet, then log in to your TP-Link ID. With the cameras or the VIGI network video recorder bound to your TP-Link ID, you can watch the live view and playback.

4

(2)

Add Devices to VIGI Security Manager

This chapter guides you on how to add cameras and VIGI NVRs to VIGI Security Manager. You can add cameras and VIGI NVRs locally and remotely based on your needs. This chapter includes the following sections:

• Add Devices in Local Network
• Add Devices Remotely

Chapter 2

Add Devices to VIGI Security Manager

V 2. 1 Add Devices in Local Network

To add NVRs and cameras locally, ensure that your devices should be in the same subnet as your computer.

2. 1. 1 Add Devices to VIGI Security Manager When TP-Link ID isn’t Logged in

Choose one of the methods below (Add Devices Singly, Add Devices in Batches, Add Devices Manually) and follow the steps to add your devices.

■ Add Devices Singly

1. Go to Settings > Device List > Discovered Devices and click 4 in the list.

0 Configure Network

Set the IP address, gateway and subnet mask of your device.

Ö Refresh

Click Ö Refresh to refresh the device list.

6

Chapter 2

Add Devices to VIGI Security Manager

1. Enter the password of your device. VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click Verify.

Note:

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

7

Chapter 2

Add Devices to VIGI Security Manager

Username

Password

Displays the username of the camera.

Set the password of the camera.

Confirm Password Confirm the password of the camera.

Password Reset Set the email address for resetting the camera’s password.

Email

• For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

1. (Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click Confirm.

O Verify Device 0 Set Recordings O Complete

Enable Record on Computer to save the recordings to the computer.

Record on Computer O Enable

8

Chapter 2

Add Devices to VIGI Security Manager

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

9

Chapter 2

Add Devices to VIGI Security Manager

4.

Wait for the device to be added, then click OK.

■

1.

Add Devices in Batches

Go to Settings > Device List > Discovered Devices, select the devices you want and click

□ X

■îtp-link I VIGI

Device

Device List

Firmware Update

Storage

Storage Schedule

Storage Management

Export Recordings

File Settings

Export Format

o o

ISJ

Please log in.

Live View Playback Settings

10

Chapter 2

Add Devices to VIGI Security Manager

2.

Enter the password of your devices. Click Continue.

Note:

If you can’t add devices in batches, try adding your devices separately instead.

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

3.

Click Next after the devices are verified.

11

Chapter 2 Add Devices to VIGI Security Manager

1. (Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click Confirm.

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

Click ^Change to customize the recording schedule of the Schedule camera on computer. It determines the time period for camera

recording.

^{Storage Location} Click ^Browse to select the storage location of files.

12

Chapter 2

Add Devices to VIGI Security Manager

1. Wait for the device to be added, then click OK.

■ Add Devices Manually

1. Go to Settings > Device List > Discovered Devices and click ^{+ A<w Manua}“^y

1. Select the device type, and enter the IP address/Domain name and port number of your device. By

default, the port number is 80. Then click Add.

13

Chapter 2

Add Devices to VIGI Security Manager

1. Enter the password of your device. VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click Verify.

Note:

• For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.
• For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

1. (Only for cameras) If you don’t want to save the recordings of your camera to your computer, directly click Confirm.

14

Chapter 2

Add Devices to VIGI Security Manager

If you want to save the recordings of your camera to your computer, you can click the checkbox of Enable Record on Computer. Configure the following parameters and click Confirm.

15

Chapter 2

Add Devices to VIGI Security Manager

1. Wait for the device to be added, then click OK.

2. 1.2 Add Devices to VIGI Security Manager When TP-Link ID is Logged in

Follow the steps below to add a device.

1. Go to Settings > Device List > Discovered Devices and click 4 in the list.

0 Configure Network

Set the IP address, gateway and subnet mask of your device.

Ö Refresh

Click & ^Refresh

to refresh the device list.

16

Chapter 2

Add Devices to VIGI Security Manager

1. Enter the password of your device. VIGI Security Manager can automatically detect the IP address and port number of the device, and you can keep them as default. Click Verify.

Note:

For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

17

Chapter 2

Add Devices to VIGI Security Manager

• For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

1. Wait for the device to be added, then click OK. The device is now bound to your TP-Link ID. Note that you need to add the device again if you log out of your TP-Link ID.

18

Chapter 2

Add Devices to VIGI Security Manager

V 2. 2 Add Devices Remotely

Every VIGI NVR and VIGI Security Camera has a device ID printed on its label. When your devices are not in the same subnet as your computer, you can add them remotely by verifying its device ID. Make sure your computer and devices all have access to the internet before adding your devices. Follow the steps below to finish the configuration.

1. Go to Settings > Device List > Discovered Devices and click ID Add by Device id . If you have not logged in to your TP-Link account, use your TP-Link ID and passwword to log in first.

tp link VIGI

Device

Device List

Firmware Update

Storage

Storage Schedule

Export Recordings

File Settings

Export Format

lijiani@tp-link. com. cn

LS * O ©

Live View Playback Settings

19

Chapter 2

Add Devices to VIGI Security Manager

2.

Find the device ID on the product label and enter it into the blank, then click Add.

3.

Enter the password of your device and click Verify.

Add Device x

O Verify Device O Complete

Please enter the password of the device for verification.

Verify

20

Chapter 2

Add Devices to VIGI Security Manager

Note:

• For the camera with no password, you need to set a password and a password reset email to enhance the security before adding it.

Username Displays the username of the camera.

Password Set the password of the camera.

Confirm Password Confirm the password of the camera.

Password Reset Set the email address for resetting the camera’s password.

Email

For the NVR that has not been used, create a login password on NVR itself and set it up first before adding it.

1. Click OK. The device is now bound to your TP-Link ID.

21

(3)

TP-Link ID Management

TP-Link ID can be used to view the Live View video and manage the devices remotely in multiple platforms. In VIGI Security Manager, you can log in with your TP-Link IDs and manage the devices bound to them. This chapter contains the following sections:

• Log In with Your TP-Link ID
• Manage Your TP-Link ID
• Change the Password
• Log Out the TP-Link ID

Chapter 3

TP-Link ID Management

V 3. 1 Log In with Your TP-Link ID

You can log in to VIGI Security Manager with multiple TP-Link IDs and switch the login account whenever you want. After you logging in, the NVR can manage the devices bound with the logged TP-Link ID only.

Note:

• If you have added local devices to the manager, a window will pop up after login. If you want to manage them via cloud services, click Bind to bind them with the logged TP-Link ID in batch; if not, click Cancel.
• After login, the recording, storage and playback are not available for the cameras managed by VIGI Security Manager.

Log In

When no account is logged in, follow the steps below.

1. Click Please log in. on the top-right corner and enter your TP-Link ID and password. You can enable Auto Login to allow the utility to remember your account and log in automatically when switching it as the logged account. Click Log In.

Log In

Note: You’ II need to add the local device(s) again after the login.

23

Chapter 3

TP-Link ID Management

1. (Optional) Specify the description for the account. Click Save.

To log in with a new TP-Link ID, click the TP-Link ID on the top-right corner, click Add TP-Link ID, and then repeat the above steps.

24

Chapter 3

TP-Link ID Management

Switch the Logged TP-Link Account

To switch the logged TP-Link account, click the TP-Link ID on the top-right corner and select an account from the drop-down list. If you have enabled Auto Login for this account, wait for switching. If not, enter the password to log in.

V 3. 2 Manage Your TP-Link ID

On the Account Management panel, you can update the account information, change the order displayed on the top-right corner, and delete the account.

Note: The account that you log in with right now cannot be deleted. To delete it, switch the logged account first.

Follow the steps to manage your TP-Link ID.

1. Click the TP-Link ID on the top-right corner and click Manage TP-Link ID.

25

Chapter 3

TP-Link ID Management

2. In the pop-up window, select an account, enter the new account information, and click Save. Use the icons to adjust the displayed order and delete the account.

26

Chapter 3

TP-Link ID Management

V 3. 3 Change the Password

To change the password of a TP-Link ID, log in with the TP-Link ID first. Click the TP-Link ID on the top­right corner and click Change Password. Enter the current password and specify a new password.

Click Save.

Change Password

V 3. 4 Log Out the TP-Link ID

To log out the current account, click the TP-Link ID on the top-right corner and click Log Out.

27

(4)

Live View

In Live View, you can monitor the channels in real time and respond to abnormal conditions with quick operations, such as starting recording and zooming in the image. This chapter contains the following sections:

Configure the Screen Layout

Configure Live View Settings

Add and Manage Groups

Chapter 4

Live View

V 4. 1 Configure the Screen Layout

1. 1. 1 Enable/Disable Live View

VIGI Security Manager displays the videos of each channel via several screens. Follow the steps below to flexibly enable or disable Live View function on channels to play the real-time video.

Enable/Disable Live View for a Channel

To enable Live View for a single channel, click a screen in Live View and click the channel on the right panel.

To disable Live View for a single channel, click a screen in Live View and click E3.

Enable/Disable Live View for Channels in Batch

For the cameras managed by the NVR or added to a group, you can enable or disable Live View for channels in batches. To create groups, refer to 4. 3 Add and Manage Groups.

29

Chapter 4

Live View

Right click an NVR or group on the right panel and click Enable Live View for All Channels. Then, Live View will be enabled on all channels that are managed by the NVR or added to the group.

To disable Live View in batches, right click an NVR or group on the right panel and click Disable Live View for All Channels.

30

Chapter 4

Live View

4. 1.2 Rearrange the Layout

The manager supports ten layout modes, and each mode displays different numbers of screens. Click

to select a layout mode and click

< 1/16 >

to change the page.

For the layout mode with multiple screens, you can change the location of a channel by clicking and dragging it to another location. To view a channel in the full screen, double click it. Double click it again to go back to multi-screen layout mode.

31

Chapter 4

Live View

V 4. 2 Configure Live View Settings

4. 2. 1 Configure Live View Settings via Toolbar

Click a screen in Live View and click the following icons to configure Live View settings, such as screenshot, digital zoom, and switching.

Click to switch between high quality (HQ) and low quality (LQ) for Live View.

(Only for certain cameras) Click to turn on or off the volume.

Click to take a screenshot. To show the screenshot in the folder, click E3 at the top right corner. To change the path where the screenshots are stored, refer to 6. 4 File Settings.

Click to start/end the recording manually. To show the recording in the folder, click B at the top right corner. To change the path where the recordings are stored, refer to 6. 4 File Settings.

(Only for the camera with Pan&Tilt) Click to enter the Preview of Pan&Tilt. You can adjust the camera location and call the presets.

32

Chapter 4

Live View

(Only for cameras with microphone) Click the icon and then hold d to talk. With this function, your can talk to people in the monitor area in real time.

SI

Click the icon to turn your cursor into a magnifying glass. To zoom in, scroll up the mouse wheel or left click on the screen. To zoom out, scroll down the mouse wheel or right click on the screen.

Click SI to start Switching, whereby the manager turns pages in Live View regularly if the channels are displayed in more than one page.

Click E3 to end Switching.

If you want to change the switching interval, click the triangle and then enter the value or drag the pointer.

Click to view the video in full screen,

4. 2. 2 Configure Live View Settings for a Single Camera

Right click a single camera on the right panel to configure the aspect ratio, delivery, stream and quality of its channel.

Ratio

Click to adjust aspect ratio. If you select 100%, the screen will automatically adjust the
ratio to fit the size of VIGI NVR Manager.

33

Chapter 4

Live View

V 4. 3 Add and Manage Groups

4. 3. 1 Add Groups

Main groups and subgroups are used to classify the channels for easier management. You can enable or disable Live View for channels in the group simultaneously.

Note: When enabling or disabling Live View based on groups, this operation is not applied to the subgroups.

Follow the steps below to add groups.

Add a Main Group

To add a group, click Group and then click E9 on the right panel. Enter the group name, select channels listed in Available Channels, and click Add. Click Up or Down to adjust the display order, or click Remove to remove the channel from the group. Click Confirm to add the main group.

34

Chapter 4

Live View

Add a Subgroup

To add a subgroup, click Group and right click a group on the right panel. Click Add Subgroup and enter the name. Then, you can drag the channel in the main group to the subgroup.

4. 3. 2 Manage Groups

Manage Channels in the Group

To move a single channel to other groups or change its order in the list, drag the channel and move it.

35

Chapter 4

Live View

To manage the channels, click Group and right click a group on the right panel. Click Manage Group Channels. Select the channels to add, remove or reorder them in the group. Click Confirm.

36

Chapter 4

Live View

Rename the Group

To rename a group, click Group and right click the group on the right panel. Click Rename and enter the name.

Delete the Group

To delete a group, click Group and right click the group on the right panel. Click Delete.

37

Playback

This function allows you to play the history recordings and edit them, such as taking schreenshots and exporting clips. You can easily find the recordings based on the channel, date, and recording types. This chapter contains the following sections:

Playback the Recordings

Playback Operations

Chapter 5

Playback

V 5. 1 Playback the Recordings

Follow the steps below to start playback.

1. Click Playback on the top, and then click an NVR to select the channels from the right panel. Click Apply.

Note: All the cameras managed by VIGI Security Manager directly are listed under the virtual NVR, and you can play the recordings of them only when the host manages them locally.

39

Chapter 5

Playback

1. Select the date from the calendar. The blue points on the calendar mean that the channels have recordings on that day.

1. (Optional) Select the recording types by clicking the checkboxes of Continuous Recording and Motion Detection Recordings.

V 5. 2 Playback Operations

In Playback, you can use the toolbar and time bar at the bottom to adjust the display, edit and export the recordings.

40

Chapter 5

Playback

5. 2. 1 Basic Playback Operations

n Click to rewind the recording. Click again to stop.

02 Click to fast forward the recordings. Click again to stop.

Jump forward by 30 seconds.

Select from the drop-down list to change the playing speed.

a

Click the icon to turn your cursor into a magnifying glass. Scroll up/down the
mouse wheel on the screen to zoom in/out.

Click to turn on or off the volume.

0

Click to take a screenshot. To open the saved path, click E3 at the top right
corner. To change the saved path, refer to 6. 4 File Settings.

Click to start/end the recording manually. To open the saved path, click E3
at the top right corner. To change the saved path, refer to 6. 4 File Settings.

41

Chapter 5

Playback

□