.

What is DMSS APP?

DMSS is a mobile surveillance app with functions like video playback, remote monitoring, device initialization, push notifications, and remote configuration. Devices like IPC, NVR, XVR, VTO, doorbells, alarms and access controllers can be added. After logging into the account, you can use cloud services like cloud upgrade and so on. The app supports iOS 9.0 and Android 5.0 or later systems and can be used with 3G/4G/Wi-Fi.

 .

What are the benefits of DMSS Camera App?

Remote operations

Before talking about DMSS Camera application on Alexa, let’s see what is DMSS? DMSS app can work in an environment with various internet connections. It connects Dahua CCTV products through both Internet and Ethernet. P2P-enabled internet connection shows great simplicity, while IP or domain name-enabled Ethernet connection guarantees strong stability.

DMSS can be operated remotely to immediately and stably control specific devices all around the world through its global network coverage. many functions including PTZ controlling, video preview and playback, video image adjustment (such as White Balance, focus, etc.), alarm subscription, voice intercom and etc. can be done remotely.

 .

increased data security

DMSS adopts multiple layers of data encryption protection to supply better data security to users.

From a product to the platform and then to the mobile client, DMSS uses multiple layers of data encryption protection to provide better data security to users. DMSS camera has also been certified by TÜV Rheinland, meaning the product complies with the GDPR and meets the TÜV Rheinland 2PfG 2624/06.17 standards, offering state-of-the-art information security and privacy protection.

Featuring a more detailed interaction design, DMSS provides a smoother user experience.

 .

Supports thermal products

To prepare the best support for the global efforts in pandemic prevention and control, DMSS CCTV also supports thermal products (supported by CCTV Suppliers), including access control, thermal cameras, and temperature monitoring terminals. It lets the operators control thermal products remotely and perform their duty in a safer manner.

 .

Setup DMSS App on Alexa amazon

Amazon Alexa is a virtual assistant AI technology developed by Amazon. It is able to voice interaction, music playback, make to-do lists, stream podcasts, set alarms, play audiobooks, and provide weather, traffic, sports, and other real-time information, such as news. Using itself as a home automation system, Alexa can also control your home security camera and even we can set up DMSS application on Alexa. Users are able to increase the Alexa capabilities by installing “skills” (additional functionality developed by third-party vendors, in other settings more commonly called apps) like weather programs and audio features.

Most devices with Alexa let users activate the device using a wake-word (like Alexa or Amazon); other devices (like the Amazon mobile app on iOS or Android and Amazon Dash Wand) require the user to click a button to activate Alexa’s listening mode, although, some phones also let a user say a command, such as “Alexa” or “Alexa wake”.

In September 2019, Amazon launched many new devices achieving many records while competing with the world’s smart home industry. The new Echo Studio became the first smart speaker with 360 sound and Dolby sound. Other new devices included an Echo dot with a clock behind the fabric, a new third-generation Amazon Echo, Echo Show 8, a plug-in Echo device, Echo Flex, Alexa built-in wireless earphones, Echo buds, Alexa built-in spectacles, Echo frames, and Alexa built-in Ring, and Echo Loop.

How to use Alexa for your home security camera?

Using Alexa with a home security camera adds comfort. You can use a smart display screen in your house to immediately and easily review past footage and see who’s at the door right now. Just make sure you have compatible devices and you’ll be using Alexa to check in on your camera (or cameras) in no time. One of the utilities of Alexa is setting up the DMSS application on Alexa. Let’s we how we can do it.

 .

DMSS application on Alexa: How does Alexa work with DMSS?

To add your Dahua device using the Amazon Alexa app:

Let’s assume that you’ve installed and configured your Alexa-compatible home security camera already and you have an Alexa-enabled smart speaker.

Now you need to log in to your Alexa app or make an account if you don’t already have one. Simply download the Alexa app and follow the prompts to sign in/register a new account.

Open the Alexa app and choose “Skills & Games” in the menu. Type “Ring” in the search box, open the skill, and choose “Enable.”

You’ll be asked to enter your Ring account credentials to pair your Ring account to the Alexa app.

 .

How to Download the DMSS Application?

The prefix “g” or “i” differentiate the applications intended for Android and iPhone/iPad and thus we will find them in the official Google Play and App Store:

Before, DMSS Plus was paid while you could get the Lite version for free. There are some differences between DMSS Lite and Plus such as E-Map (visual and functional installation plans), alarm management, and push notifications. Currently, there is no need to choose since Dahua has released the Plus version for free. In addition, this publication is already adapted to the new GDPR (General Data Protection Regulation).

 .

 .

Download Dahua DMSS software

View DMSS APP User Manual

 .

What Functions Do These Apps Offer?

The aforementioned applications have undergone several updates that improve their operation and increase their capabilities so sometimes it is difficult to follow all the news. Therefore, let’s see a summary of what they offer us for the management of our video surveillance devices:

Integration of Other Security Devices

The main novelty is managing DMSS CCTV devices, access control devices, and alarm systems from the manufacturer Dahua in a single app.

 .

Device Management

Among other options, they can be located within a local network (WiFi or LAN), and add devices via IP/Domain, DDNS, and P2P (Easy4IP and Lechange). This last option allows you to add devices by scanning the QR code and even a complete list of devices, very useful for migrating from the Lite app to the Plus version in a single operation.

 .

Live View and Playback of Recordings and Stored Clips

Live, to access and capture live video from added devices, combining channels and cameras. Playback, to consult, capture, cut, and extract the recorded videos. In addition to that, clips and captures can be viewed from the smartphone’s memory.

 .

Channel Configuration

It allows you to modify the coding (image resolution and ratio), image adjustments, PTZ or motorized zoom camera movement control, two-way audio communication with the device, and quadrant display, as more interesting functions.

 .

Notifications and Events

Detection events generated by devices are listed and notified in the app through push notifications. These consist of instant and free alerts supported by the devices and to which we can easily subscribe, depending on the type of detection selected.

 .

Cloud Recording, Cloud Storage Services

Upcoming updates will enable cloud video recording under a subscription service, with per-channel rates for 3, 7, or 30-day recording, and only for cameras that support such functionality.

 .

You can also check:

Best CCTV Brands in the UK

 .

 .

How to See Your Dahua DMSS Security Cameras from the Cell Phone

DMSS is Dahua ‘s free software to connect to your equipment from smartphones. It is used to connect to all current Dahua manufacturer equipment: DVR recorders, HDCVI, NVRs, IP cameras, etc.

This App can be downloaded for free in both the Play Store and the App Store. The Android version is called gDMSS and the iPhone iOS version is called iDMSS.

To connect your Dahua device via P2P on your cell phone, you are going to need:

 .

How to Configure Your Dahua Security Cameras in DMSS

Enter the SN of the device and touch the “Next” button.

Once all the boxes are completed, tap the “Save” button that is located at the top right.

If you followed the steps correctly, it should start viewing your security cameras live. By tapping the back button at the top left, you can return to Start.

 .

How to View Your Dahua Cameras in DMSS

If you followed the steps correctly, you should start viewing your security cameras live.

 .

 .

 .

The red numbered buttons:

 .

The Yellow numbered buttons:

 .

 .

Conclusion

As we saw, you know about DMSS App & can set up Alexa on your camera easily, just you need to go to the menu and tap Skills. Find the relevant skill (some cameras have specific apps for the cameras, outside of their main smart home apps). Enable the skill and link the account with Alexa. It’s a simple thing to set up and it means that you can create a security monitor without ever firing up your smartphone or tablet. All you need is one of the three Amazon devices noted in the intro and a compatible DMSS camera.

editor’s note: The application supports many brands and models. The main models are included in the article. We explained our guide through the Amcrest system.

Blue Iris User Manual

To download a full user manual for Blue Iris 5, click on the link provided below.

Blue Iris 5 User Manual

How To Upgrade Blue Iris Demo Software With An Amcrest License Without Losing Settings

If you are currently using a demo version of the Amcrest Blue Iris software upgrading your account will not reset your settings. All settings will be retained on the software after the upgrade is complete. For more information on how to upgrade your demo version of Blue Iris to paid version, please follow the steps provided below.

Step 1: Open your Blue Iris software and click on the Settings option (  ) in the upper left corner of the interface and click on Settings/info.

Step 2: In the About tab, click on the Register now option.

Step 3: In the Activation screen, click Next

Step 4: Enter the Amcrest license number or key you have purchased into the activation box. Click Next to continue.

Step 5: Click Finish once the code has been activated.

Step 5: The new license key has now been applied to your Blue Iris software. The information can be viewed in the License Key section of the menu. Click OK to continue.

The “Evaluation Copy” overlay will be removed from the live view screen and your previous settings will be accessible throughout the software.

Blue Iris 5 Compatibility

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

For more information on how to install the Blue Iris 5 software, click here.

Blue Iris UI3 update Issue

If you are attempting to update to a new version of the Blue Iris software and receive an error such as:

this is not a result of a bug or issue with the software itself but is a result of an update made to Visual Studio C++ compiler which is the software used to build Blue Iris. To resolve the issue, a simple reinstall of the software will fix the problem, however, if you wish to resolve the issue without reinstalling the software, please refer to the information below.

A resolution will be based on the which version of Windows you are running. For instance, if you are operating on a 64-bit version of Windows you will need to search and run the VCREDIST_X64.exe to resolve the issue. If you have a 32 bit system you will run the VCREDIST_X32.exe.

If this file is not found on your computer you may run it from the following URL blueirissoftware.com/VCREDIST_X64.exe (or VCREDIST_X32.exe for 32 bit).

Step 1: Load the VCREDIST .exe file and click Run

Step 2: Click on Install.

Step 3: A restart of your computer will be required to complete the install. Click on Restart to restart your computer.

After your computer has finished restarting please load the Blue Iris software and run the update as normal. If this does not fix the issue a full re-install of the software may be required. To re-install the Blue Iris software on your computer, access the Control Panel and click on “Uninstall a program”.

Locate the Blue Iris Software from the Programs and Features list and click Uninstall. Select “Yes” to remove Blue Iris from your computer. For more information on how to install Blue Iris on your computer click

Note: It is recommended to not delete any registry entries or license activations during this process.

Click Finish, to restart your computer and complete the uninstall.

For more information on how to install the Blue Iris software on your computer, click here.

Blue Iris Not Automatically Starting up After a Crash?

If your Blue Iris software crashes or becomes unresponsive and the software does not restart automatically with its last settings displayed then the software may need to be ran as a Windows service. By default, Blue Iris 5 is not set to run as a Windows service so therefore would have to be implemented manually. For more information on how to set Blue Iris as a Windows service, refer to the information provided below.

Step 1: Open Blue Iris 5 and click on the settings menu located in the upper left corner of the screen.

Step 2: In the Settings menu, click on the Startup tab.

Inside the Startup tab, make sure the “Use last window position” option is selected in the Window field then click on the “Run as a Windows service (no UI, run again for console)” checkbox. This will enable your software to run as a Windows service. Click OK to continue.

Step 3: The service will install automatically. Click OK to reboot or restart the Blue Iris software.

The software is now running as a Windows service which allows the software to reboot with last settings in tact after a crash or service interruption.

How to Add a Camera Into Blue Iris

The camera and the computer you are using must be on the same network during setup. Please make sure you are running the most current version of Blue Iris during setup. The latest version of Blue Iris can be downloaded here.

There are 2 ways to add a camera into Blue Iris. You can right click on the main menu, or click on the settings menu (  )in the top-left corner of the interface.

Adding a Camera

To begin, right-click on the main interface or click on the settings menu () to access the “New camera” menu.

In the new camera menu, give your camera a name, a short name (for URLs and filenames), choose a type, which in this case will be a Network IP, and enable any options such as, enabling audio, motion detection, etc. Click OK to continue.

This will open two windows. The top window will be Network IP Camera Configuration. Enter the address of your camera (IP Domain or DDNS as well as RTSP address) and click on the Find/Inspect… button on the right to confirm. Enter the username and password, select the make as Amcrest, select the model of your device (ProHD and HDseries cameras as “ProHD 1080p RTSP/HTTP”), and specify the RTSP and ONVIF ports.

Note: If you choose the other option profile, “ProHD/IP2/3/4/4M Mainstream RTSP” features such as PTZ or other related features may not be accessible. Please use ProHD 1080P RTSP/HTTP in the Model field.

After filling in the information required, click OK. The second window will appear titled New Camera. Here you can make many adjustments to the way you want Blue Iris to configure your camera.

The page is defaulted to the Video tab. The options available for adjustment are Image Format and Frame Rate, PTZ Controls, Recording through Blue Iris, Alerts through Blue Iris, and other features. Once you have finished adjusting any necessary settings, click on OK to add the camera. The live view screen of your camera will show in the interface.

How to Renew a Key in Blue Iris 5

Any expired keys in the Blue Iris 5 software will cause the software not to work with any connected cameras and may cause them to be inaccessible. Keys in the Blue Iris software provide up to one year of service from the initial start date of your license and will need to be renewed before they expire.

Note: Please ensure you are using the most up to date version of Blue Iris. To download the most up to date version of Blue Iris, click here.

For more information on how to renew your Blue Iris key, please refer to the steps provided below.

Step 1: Click on the settings menu (  ) located in the top-left corner of the interface and select “Settings”.

Step 2: In the bottom left corner of the Blue Iris Settings menu, click on the Upgrade/renew button to renew the key for your license.

Note: The new expiration date will be displayed in the menu and will be good for one year of the initial start date.

When you have purchased or renewed your account you will receive a new code in your email. Once the new key provided is entered into the Activation menu, press the “OK” button.

How To Install Blue Iris 5

To install the Blue Iris 5 software onto your computer, go to the Blue Iris website and download the installation file .

Minimum Requirements

Recommendations When Using Many and/or HD Cameras

Compatible with the Following Brands:

Amcrest, 4XEM, ACTT, Airlink101, AIRLive, Allnet, Apexis, Arecont, Astak, AVTech, Avlosys, Axis, Bosch, Canon, Cisco, Coolcam, Dericam, Di4-Lan, DLink, EasyN, Edimax, Evocam, Foscam, Gadspot, Ganz, Gandstream, Hawking, HIKVision, HooToo, Intellinet, JVC, Linksys, Logitech, Lorex, Microseven, Mobotix, Panasonic, Pelco, Planet, Sanyo, Sharx, Siemens, Sony, Stardot, Swann, Toshiba, Tenvis, TO-LINK, Trendnet, Vivotel, Wansview, Y-Cam, Zavio, Zonet and many more.

Follow the on screen instructions to install the software. You can use the demo version or purchase a license. There is are options for a fill license (up to 64 cameras) for $69.95 or a Lite license for a single camera for $34.95.

Note:  Any Blue Iris keys that have expired support have to be renewed or upgraded for it to work in Blue Iris version 5. Additionally, if you are upgrading from version 4, please allow access and remove version 4 from your system. Please say NO to deleting any of your settings. Settings are automatically backed up to C:\Program Files\Blue Iris5\backup_upgrade_50.reg. Click OK to continue.

Now that you have your software installed, it’s time to start adding your cameras. Ensure that you have already installed your cameras and they are working correctly in a web browser. For more information on how to access your camera in a web browser (web UI), click here

If you have any PTZ cameras, go ahead and set the presets, if any, now through the web interface before adding them to Blue Iris. The Blue Iris interface is shown below:

For more information about adding a camera into the Blue Iris software click here

How to Enable Two Way Audio Using Blue Iris

If your camera supports two-way audio and you are using it in Blue Iris, two-way audio can be configured directly in the software. Please make sure a compatible microphone is set up and configured on your computer before enabling it in Blue Iris. For more information on how to enable two-way audio using Blue Iris please refer to the information provided below.

Step 1: Log into Blue Iris and access the device.

Step 2: Click on the Blue Iris software settings icon.

Step 3: Click on the Audio tab and enable the Enable audio capture hardware option.

Note: Make sure the proper microphone is selected in the Device dropdown menu.  Use the Gain slider to adjust and test the microphone audio.

Step 4: Select the proper output device for your computer in the Output (Device) dropdown menu and click OK.

Step 5: On the main interface click the speaker option to hear the audio from the device. Then click and hold the microphone icon and speak into the microphone.

.

.

EZCLOUD REGISTRATION

Uniview provides a web portal to sign up and register an account with EZCloud. http://en.ezcloud.uniview.com It is recommended that Internet Explorer 8 or higher be used to view the web portal.

.

There are a few aspects to note about the web portal:

.

.

An account can also be registered through the EZView smart phone application. See Adding A Device -> EZView

.

ACCOUNT SIGN UP

.

Signing up an account is very similar to most other online account registration as seen from the image above. Enter in the proper information requested such as the Username, Password and a valid Email

address. Click the Acquire button to receive a registration email which provides a Verification Code. Please note that the email may take several minutes to arrive.

.

Enter the Verification Code into the box provided and click the Sign-up button to register the new EZCloud account.

.

PRO TIP: Integrators and Installers can setup an account and then share device access to customer accounts for managing multiple devices and providing support later.

.

.

ACCOUNT LOGIN

.

.

Login either with the Username or registered Email address created previously for account management. If the password has been forgotten, there is a link provide for password retrieval.

.

EZCLOUD MANAGEMENT

Once the register code is located, there are three different ways to add and manage devices on an existing EZCloud account; through the EZCloud web portal, through the EZView smart phone application and through the EZStation CMS.

EZCloud Quick Install Guide v2

.

REGISTER CODE

The Register Code is a unique 26 digit & character string that is used to connect a device to the EZCloud service. This code also comes in a QR format for quick scanning. There are a few places you can find the Register Code:

.

Note the QR Code on the sticker for quick adding the device to an EZCloud account via the EZView smart phone application (more on the EZView app later in this guide).

.

The myCloud feature is toggled on by default. Please note that a new myCloud account cannot be registered from the recorder interface.

.

NOTE: On some device firmware versions Uniview uses the title myCloud rather than EZCloud. The URL containing myCloud will redirect to the proper EZCloud URL accordingly.

.

.

.

NOTE: Currently (as of December 2015), the web interface of Uniview devices will only work properly on Internet Explorer version 8 or higher.

.

EZCLOUD WEB

.

.

.

Once logged into the EZCloud web portal (as described in the EZCloud Registration guide section above), the backend will appear as the image shown above. To add a device, click the + Add Device button and a new webpage will display with entry boxes for both the Register Code and Device Name. The Register Code is the 26 digit and character string detailed in the section above. The Device Name is a title that represents the device being registered (e.g. Office B, 123 Elm St, ABC Company, etc.)

.

.

After clicking the Add button, the Device List will appear again with the newly registered device listed under My Cloud Devices. If the P2P service plug-in was not previously installed, the follow message will appear on the upper most portion of the web page:

Click the Download link and install the plug-in (the computer may have to be restarted to complete the install) After rebooting the Windows PC and accessing the EZCloud backend again, there may be a similar message on the lower portion of the web page as follows:

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

On the management page, there are three different sections: My Cloud Devices, Shared Cloud Devices and Sharing Records.

.

.

MY CLOUD DEVICES

The My Cloud Devices section of the EZCloud management page lists all added devices to the registered account. The devices can be navigated using a simple interface utilizing arrows to browse through the results (see toolbar at the bottom of each section).

.

As with the following sections, there are multiple columns that denote information that pertains to the recorder(s) registered to the account.

.

• Device Name – the name given to the device when it was first registered.

• Device Type – the model # of the registered device

• Device IP – the external IP address of the registered device

• Latest Online Time – the time the device was last detected to be online

• Status – indicates whether the device is Online, Offline or having a network error

• Share Device – a link that provides a menu to share the registered device:

NOTE: The ‘Share To’ input box receives the email or username of the account being shared to. A date and time can be set indicating how long the device will be shared. A specific user group can be selected defining the rights given to the shared device. Finally, a description can be entered to let the user know details that represent the device.

• Change Name – a link that allows the user to change the name of the device

• Retrieve Password – allows the user to generate an overriding password in the case of a forgotten password:

.

NOTE: All information will be entered automatically into the above form as it pulls it from the registered device. By clicking the Acquire button, the form will send an email with the verification code. Enter the verification code into the input box and click Retrieve to receive a password. The generated password will only work for the valid date and only if the device is properly set to the valid date. If the date is set incorrectly on the device, adjust accordingly on the Retrieve Password web page.

.

SHARED CLOUD DEVICES

The Shared Cloud Devices section displays a list of devices that were shared to the registered account. The columns of information in this section are very similar to My Cloud Devices, however there are some unique information displayed for shared devices.

.

.

All other columns such as Status, Change Name, Access Device and so forth, function exactly the same as in the My Cloud Devices section.

.

SHARING RECORDS

The Sharing Records section displays a list of devices that have been shared by the registered account. As with the previous sections, there are some columns of note.

.

EZVIEW

.

EZView is Uniview’s smart phone application for monitoring, configuring and managing multiple camera systems. Typically, a device will be added to an EZCloud account using the EZView app due to the ability to forgo using a computer for set up.

.

REGISTER (EZVIEW)

On the main screen, there is an icon in the upper left-hand corner that appears to be like three lines stacked. This is the main menu button. Click the main menu button and then click the P2P Account link at the top of the menu. This will bring up a Login screen that also has a few notable links. The first is the Sign-Up link that will allow for a new account to be registered through the app (similar to the web portal method detailed earlier in this guide). The second link, Forgot Password, gives a similar menu to allow for an email verification and password change.

.

Once logged in to the registered EZCloud account, the P2P Account menu will appear (referenced above). On the P2P Account menu there are a few minor options which include the ability to change the account’s username and password. The My Sharing Records menu lists all instances of when devices have been shared from the current account and sharing can be canceled on any of these instances.

.

My Devices links to the Devices menu which displays all devices added to EZView (includes MyCloud Devices). See the third image above; there are different icons that indicate what kind of device is being listed. The light blue recorder with a cloud symbol indicates a device added via EZCloud and the teal recorder with the share icon indicates devices that have been shared via EZCloud.

.

ADD A DEVICE (EZVIEW)

To add a new device to EZCloud, click the small + icon in the upper right-hand corner of the Devices menu. Below is an image of the Add Device menu.

.

The Add Device menu contains the following options:

.

.

The Save button in the upper right (looks like a floppy disk) will add the device to the logged in registered account. The Start Live Preview button will not only add the device, but it will also launch all cameras in Live View.

NOTE: A registered EZCloud account must be logged in before adding a new device via P2P.

.

EZSTATION

.

EZStation is Uniview’s CMS software that allows for monitoring, configuring and managing multiple camera systems on a Windows PC. NOTE: Currently (as of December 2015) there is no CMS software developed for Apple Mac computers.

.

REGISTER (EZSTATION)

Registration of a new EZCloud account is straight forward; on the Home Screen (shown above) click the Device Management tile and then click the Cloud Device on the left toolbar under the Device tab. By clicking the Register button, the EZStation software will launch an Internet Explorer browser window to register an account online. The process of registering on the EZCloud web portal is located in the EZCloud Registration section of this guide.

.

Once registered (or if already registered) click the Login button to enter in the login credentials for the EZCloud account of choice. Other options include Auto Login, applying for an account from the login menu and account password recovery.

.

DEVICE MANAGEMENT (EZSTATION)

.

There are two main sections of interest here: the My Cloud Device list and the Shared Cloud Device list. Above those two lists are a header with the currently logged in EZCloud account, a Refresh link to refresh the current lists, a Switch Account link which launches a new login menu for account switching and a Logout link.

.

MY CLOUD DEVICE (EZSTATION)

The My Cloud Device list is dedicated to managing devices that have been added to the registered EZCloud account. The toolbar has the following features:

.

.

SHARED CLOUD DEVICE (EZSTATION)

The Shared Cloud Device list displays the devices that have been shared to the currently logged in account. If the integrator opts to share cloud devices with the end user, then the end user will be utilizing this list to see the status and have access to those devices. The toolbar has the following features:

.

Viewing and configuring the cloud devices listed in the Cloud Device menu is the same as any of the other device types on the Device Management page. Please see Uniview’s help file by clicking the User Manual button the topmost toolbar in the upper right of the EZStation software, to learn about how to group devices to prepare them for live viewing.

.

ADDITIONAL INFORMATION

Cloud Update (firmware) will not function unless the device is registered to an EZCloud account.

.

EZView has a speed test function that allows the user to find the upload speed for a device registered to the currently logged in EZCloud account.

.

A device can only be registered to one EZCloud account. All other accounts need the device to be shared to them by the EZCloud account that the device was originally registered to unless the device is deleted from the original account’s device list.

.

EZCloud may be referred to as MyCloud on older firmware versions.

.

P2P refers to Peer-To-Peer. A “Cloud” device refers to, in the case of EZCloud, a device that has been registered to EZCloud for remote connection (not a remote storage medium). The way P2P works is that the device connects to the EZCloud server and then to the end user. The EZCloud acts as a go between, rather than having to open up ports (pinholes, virtual servers, etc.) to allow remote access to offsite clients. This is the preferred method of remote connection since open ports can pose a security risk and can be difficult to setup on complex networks (especially when a firewall is implemented).

Also, many satellite internet service providers and mobile hotspots will not allow ports to be opened unless a static IP is purchased (usually at a premium).

Featuring an extensive and highly skilled R&D workforce, Hikvision manufactures a full suite of comprehensive products and solutions for a broad range of vertical markets. In addition to the security industry, Hikvision extends its reach to smart home tech, industrial automation, and automotive electronics industries to achieve its long-term vision. 

.

Password Reset

This page will guide you in resetting passwords on your Hikvision devices.

For end users: 

We highly recommend “4 Ways of Self-service Password Reset” (you can see the Tutorial video here). Please note that not all Hikvision devices support all these methods. Go to the “Forget Password” page to check the various methods supported by your product.

For installers: 

You can easily reset a password using the Hik-Partner Pro mobile app. 

Check out the tutorials below to discover the quickest way to reset a password. If you have any questions during the process, please contact Hikvision (Find the contact of Hikvision technical support team) or see Troubleshooting Tips of Password Reset Failed Issue here.

Note: Also try the Password Hints function to help you recall your original password. This function is only available for NVRs (76Q-series, K-series, K-series with AcuSense) with firmware V4.75.000 and later. Learn more here.

Self-service password reset

Via account verification

Prerequisite:

The device has been added to the Hik-Connect or Hik-Partner Pro account.

.

Prerequisite:

A reserved email address has been set up by the user.

Prerequisite:

Security questions have been set by the user.

Prerequisite:

The GUID file has been exported and saved by the user. 

.

Password reset via XML file

Prerequisite:

The Hikvision devices can be detected on the same LAN.

Hikvision How to & FAQ

Also Read : Hikvision How-To Tutorials Part1

.

How to Check Device Serial Number

.

How to Find Device Firmware Version

.

How to add IPC with POE function to NVR

Description

POE cameras could be added into NVR which supports POE function with both Manual mode and Plug-and-Play mode. When applying the Plug-and-Play mode, please kindly make sure the password of the camera is the same with the NVR, or you could set the password of the camera to 12345.

Note: Plug-and-Play mode could only be applied when the camera is added directly to the POE port of a NVR.

999

Download the FAQ

How to Enable Hik-Connect Service in Device

Summary

Hik-Connect is a new service introduced by Hikvision which integrates the dynamic domain name service along with alarm push notification service. It provides an easy way for devices to connect to the Internet.

This manual is a guide for users to show them how to enable Hik-Connect service in device.

Discretion

User interface may not be identical to the instructions shown below depending on the product, firmware version. However, the information and settings required to setup Hik-Connect services are similar across all supporting products.

Preparation

Users need to upgrade device to proper firmware that supports Hik-Connect Service.

999

Download the FAQ

.

How to Unbind Device from Hik-Connect Account

Description

One device can be added only by one Hik-Connect account, if the device was added by other account, you cannot add it again. You can follow steps below to unbind your device or check the video which can help you.

Youtube video link

How to Unbind Device via Hik-Connect APP

How to unbind device via SADP tool

999

Download the FAQ

.

How to Solve Hik-Connect Offline Issue

Description

When our customer adds a device to the Hik-Connect account and the APP returns device is offline, we can follow steps below to solve the problem or locate the causes. 

999

Download the FAQ

.

How to Configure Communication Mode of AX PRO

There are three types of Communication Mode via Communication > Cloud Service > Communication Mode:

Wired Network & Wi-Fi Priority

It means that Wired Network, Wi-Fi Network, Cellular Data are all supported, AX Pro will choose best network status and change connecting ways when network is not stable. It is recommended to use this mode when your device is with complex network environment, since it can help you select better way automatically. 

Wired & Wi-Fi 

It means that only Wired Network and Wi-Fi Network are supported, AX Pro can only connect with wired or Wi-Fi. It is recommended to use this mode when you want to save cellular data or do not want to use cellular at all.

Cellular Data Network 

It means that AX Pro only use cellular data network to connect. This mode is usually used in poor network environment, like wired and Wi-Fi network are hardly connected. Besides, it can help you save network detecting time.

Tips

When you set Communication Mode as Cellular Data Network, the followings can help you use cellular data successfully: 

1. Keep MTU as default 1400, Access number as default *99***1#

2. Test SIM in mobile, make sure that your SIM card can call, send message and connect to the internet

3. The AX PRO default dialing includes most SIM card APN but not all. If the network is not connected, you need to search the SIM card’s APN by Google or ask your mobile operator then set up the SIM card APN manually and then restart it.

999

Download the FAQ

.

How to Download Multiple Recordings

Hikvision device support download/export multiple recording at the same time. This file will introduce three methods of multiple download recordings: local GUI, web page and iVMS-4200 software.

Method 1: local GUI 

On local GUI, we need turn to the button of File > Video. In this page, we could select search condition, time and camera channel which you want to download. After select, click “Start Search”.

After search, it will show all the recordings of the channel 1 default, and if we want to check other cameras recording, we need to select the Channel to switch to other channel. 

Then we could select the recordings and Export.

Method 2: Web page

Web page Log in the device via IP address on IE browser, turn to Playback page, select the camera which you want to check, click the download button in the lower right corner. It will pop up the download configuration page, in this page, we could select the camera/ type/ time, after search we could select the recording files and download.

Method 3: iVMS-4200 software

999

Download the FAQ

.

How to Solve DVR Live View Noise Issue of Hik-Connect

If there is noise of DVR in Hik-Connect when remote live view or sliding channel (switch to next screen), you can try the following methods to solve the problem.

1. If you connect a coaxial audio camera to DVR, please turn on Noise Reduction function in Hik-Connect to solve it.

2. If it’s not a coaxial audio camera, please change to coaxial audio camera then connect to DVR.

3. If you don’t want to change camera, please change camera Stream Type from video & audio to video and set DVR audio resource as local to solve the problem.

999

Download the FAQ

How to Solve IP Camera No Link Issue on PoE NVR

IP cameras could be added into PoE NVR with both Manual mode and Plug- and- Play mode.

When applying the Plug- and- Play mode, please kindly make sure it is Hikvision brand camera, and the password of the camera is the same as the NVR. For “No Link” issue, please enter NVR.

Menu – Camera – IP Camera, click Status icon of camera to check the error message first.

Scenario 1:

The user name or the password is wrong.

Solution :

If the IP camera has hard reset button, please turn off the camera (cut off the power). Then keep holding the button for more than 30 seconds. Meanwhile, power on the camera while holding the button. The device would be back to the inactive status. PoE NVR will automatically active and connect the camera.

If the IP camera doesn’t have hard reset button, please use SADP tool to reset camera password first. You can operate according to below steps:

1. Download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable.

3. Running SADP tool to search camera.

4. Select the device, and click the “forgot password” button.

5. If it has an export button, you can click it to export a device’s xml file and send it to our regional support team to reset password. 

6. Get import file from support team, then import file to reset device password.

(Note: Please set the new password of camera to the same as NVR’s.)

7. PoE NVR will automatically connect the cameras with same password.

Scenario 2:

Network is Unreachable

Solution:

If the camera is connected to NVR PoE port. 

1. Please download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable .

3. Running SADP tool to search camera, check device IP address.

4. Please access camera via web browser as following picture.

5. Go to Configuration – Maintenance – Default, default camera to factory settings, PoE NVR will automatically active and connect camera.

If the camera is connected to the PoE switch, please connect switch to NVR LAN port. The IP address of the camera must be in the same network segment as the IPv4 address of NVR. Then enter NVR Menu- Camera- IP Camera, select camera and click Edit icon.

Select Adding mode to Manual, enter camera IP address and correct password, then click OK to add camera.

Scenario 3:

IP camera does not exist

Solution:

“IP camera does not exist” means NVR does not detect the camera input.

Please check whether the camera is properly connected to the POE port of the NVR. You can try to change a shorter cable, change a PoE port or connect a external power supply to IP camera to test.

999

Download the FAQ

How to Solve Live View Error on iVMS-4200

This document displays how to solve common Live View Error on iVMS-4200. In order to get high performance, please kindly download and install the latest version of iVMS-4200 via the link: https://www.hikvision.com/en/support/download/software/ivms4200-series/

Case 1: HCNetSDK.dll[2] 

Case 2: Playctrl.dll[2]

Case 3: HCNetSDK.dll[5] 

Case 4: HCNetSDK.dll[91] 

999

Download the FAQ

.

One Picture to Solve 6 Errors about Unbind

If the bound account can not login and you can not access the device via local GUI, you could try to unbind device from Hik-Connect App or SADP tool.

How to Unbind Device via Hik Connect APP 

How to Unbind Device via SADP tool 

When you unbind the device and meet errors, hope this picture could help you to solve it.

Scenario 1:

“102060” “102075” or “Unbinding failed. Not support by the device.” on App/SADP or “unlinking timeout” on local GUI

Solution:

1. We recommend you login the previous account to delete the device, then add it to the new account.

 2. If the previous account can not login, you could choose third party DDNS name to get remote live view. Please refer this guide: How to Use Third Party DDNS Services V3.0.pdf (hikvision.com)

3. If necessary, please kindly connect the local support team for better solve this issue. 

Scenario 2:

“Operation Failed 7” or “Error code: 99 Network Connection Failed” or “Hik-Connect service is offline”

Solution:

1. Enable Hik-Connect function in device and make device Hik-Connect status is online.

2. If device Hik-Connect status goes online and offline frequently, change to a stable network or upgrade firmware then try again.

3. If the problem persists, contact support to confirm connection status.

Scenario 3:

“Incorrect Device IP Address”

Solution:

1. Make sure your mobile/computer connect to the same LAN as device connect to.

2. Connect device and mobile/computer to primary routing network in topological map.

3. Enable UPNP function of the router, try to upgrade device firmware and reboot the device.

Scenario 4:

Only the device in the same area with the app can be unbound from its account.

Solution:

Please confirm the area which the bound account belongs first.

1. Via App: Use new account with the same registered area information to unbind.

2. Via SADP: Make sure the geographic location of the device is the same as the area to which the bound account belongs.

3. If you don’t know the area information of the bound account, please contact support team help you confirm or assign registered area information.

Scenario 5:

Operating failed: 153

This error caused by inputting wrong password too many times and the user was locked.

Solution:

1. Reboot the device.

2.  Modify the LAN IP of the PC or mobile phone and try again.

Scenario 6:

The device cannot unbound from any account for more times.

Solution:

1. This error means the device have been unbound too many times during one day, and you could try to unbind after 24h.

999

Download the FAQ

.

Two Steps to Solve No Result of VCA Playback Search

If do VCA search on playback page of Hikvision device and there is no event result, please do the following 2 steps.

Notes: Before searching playback video, make sure you have configured recording schedule on Hikvision device. 

Step 1: Enable Dual-VCA on Web

(a) Login to web page of device as the below picture.

(a) Login to iVMS-4200 and click Setting button – Basic settings

(b) Go to Configuration –Video/Audio– Display Info. on Stream to tick the checkbox of Enable Dual-VCA then Save.

Notes: After above settings, do VCA search via web browser of the camera. If the device is DVR/NVR/HVR, except for configuration on web, we also need to do step 2.

Step 2:

If the device is DVR/NVR/HVR, login local GUI, click Configuration Button – Advanced – enable Save Camera VCA Data.

After above settings, search VCA playback as below:

(a) via web browser

(b) via local GUI on DVR/NVR/HVR

Notes: If search motion detection VCA playback, Enable Dynamic Analysis for Motion is necessary.

999

Download the FAQ

What Can We do If NVR Cannot View via Chrome

It is recommended to download ivms-4200 on your computer instead of viewing via Chrome browser.

If you want to use Chrome browser to view, download Plug-In first, install it and restart the browser, then you can view via Chrome. 

If ‘Download Plug-In’ does not show, it usually means that your NVR does not support live view via Chrome, in this situation, there are mainly 5 ways to solve the issue:

1. Turn to Configuration > Local > Live View Parameters > Protocol. Switch protocol from TCP to UDP, or switch from UDP to TCP, save and view in chrome.

2 & 3. Some devices support to check network resource statistics. Turn to Configuration > Maintenance > Network Resource Statistics. If the previous value of Input Bandwidth is almost equals to the latter value, please reduce bitrate.

For those device which cannot check Network Resource Statistics, you can reduce bitrate and resolution directly for a try.

Turn to Configuration > Video/Audio > Video

Reduce Resolution and Max. Bitrate, save and view in Chrome. The reference value are as follows: 

Resolution —Max. Bitrate

1080P(2MP) — 4096 kbps

720P(1MP) — 2048 kbps

704*528（4CIF） —- 1024 kbps 

528*384 （2CIF） —- 512Kbps

Please set your NVR Video Encoding type as your camera supports, which means if your camera only support H.264 please switch NVR Video Encoding to H.264.

4. If your NVR supports multiple video output interfaces, it is recommended that 1 camera only set 1 output interface. Although the other interfaces you configured and didn’t use, NVR is decoding which will occupy the encoding ability and may cause the issue. 

5. Open Microsoft Edge on Windows 10.

Turn to Setting > Default browser > Internet Explorer compatibility Under the “Internet Explorer compatibility” section, turn on the “Allow sites to be reloaded in Internet Explorer mode” toggle switch.

Click the Restart button, then you can view via Edge browser.

If you have done all the above, the issue is still not solved, contact local support and provide the following information:

999

Download the FAQ

.

So… let’s see. There are 3G hotspots that have ethernet ports on them. You can contact the company that provides you with your 3G modem, and tell you that you need a 3G modem with both WiFi and Ethernet. In fact… they have a sales department trained just for this. You tell them how you want to set up your home… and they will provide you with the proper equipment. Cool, right?

Otherwise… you’d have to use a computer as a middleman. The computer would need to have both wireless and ethernet…. like many laptops. You’d connect the laptop to the modem via Wireless, and you’d connect the DVR to the laptop via the ethernet, and then you’d enable Internet Connection Sharing in Windows, and designate the Wireless as the Source. Then, while you have the laptop on, your DVR would connect to the internet.

You could also purchase a WiFi extender, as most have ethernet ports. Then, you follow the instructions to set up the WiFi extender to the 3G modem, and you connect the DVR to the ethernet port on the WiFi extender.

You could do some research on what WiFi routers can also be used as range extenders when you replace the firmware with DD-WRT… the list isn’t all that long, but it means it is *possible* to take an old Wireless Router and turn it into a range extender. If you just happened to have one of those models, I guess that would save you from spending money.

But…. you definitely need some intermediate device between the internet connection and the DVR.

.

To connect a DVR for CCTV to your PC sharing network, you can follow these general steps:

Keep in mind that the specific steps may vary depending on the make and model of your DVR and the software it uses. It’s always a good idea to refer to the DVR’s user manual or contact the manufacturer for detailed instructions.

.

Connecting a DVR for CCTV to your PC sharing network involves several steps. Here’s a general guide:

Remember to consult the user manual of your DVR and the software for specific instructions, as steps may vary based on the brand and model. If you encounter difficulties, seeking assistance from a knowledgeable CCTV Camera Dealer in Chandigarh can provide guidance and support for network setup.

.

.

How do I connect a CCTV DVR with a laptop using an HDMI cable?

.

To connect a CCTV DVR with a laptop using an HDMI cable, follow these steps:

Overall, connecting a CCTV DVR to a laptop using an HDMI cable is a straightforward process, but it’s important to ensure that both devices have the necessary ports and settings to enable the connection. If you have any issues or questions, consult the user manual for your CCTV DVR or laptop, or seek assistance from a technical expert.

.

.

How do I connect my Hikvision DVR to a laptop and share my WiFi network to it?

.

I think you want to connect your DVR from Hikvision’s free DDNS hostinf service.

You can make your user ID on hikonline Resources and Information. After that you have to go to network settings menu and follow this video

.

How Can I watch CCTV footage with my PC? I’m using Hikvision 8 channel DVR and had connected it with internet.

.

Yes you can, Download and Install ivms-4200 software on your PC if it’s not at the same location as the cameras, or just type in the DVR ip address to your browser address bar if you are on the same network as the DVR.

.

.

How do I connect a CCTV DVR with a laptop using an HDMI cable?

.

A CCTV DVR is an analogue device so it uses baseband composite video. 9PAL or NTSC) at standard definition. You will need to find a video to HDMI converter if you really want to just view CCTV images on your laptop. You will still need to control the DVR locally via its remote control.

I abandoned DVRs some years ago.

A better approach is to replace the unit with a Network Video Recorder (NVR) that can be connected to your home network and can accept legacy SD video inputs from your cameras. Or you can go the whole way and upgrade your cameras to IP and connect them to your network directly via WiFi or Ethernet cabling.

Then you can access the NVR via Ethernet or via your WiFi to check recordings etc. It is also useful to add a “cloud key” that will allow secure access remotely from any external location via the Internet.

I have my CCTV surveillance integrated with my high speed home network using equipment provided by Ubiquiti. I can remotely access cameras at two properties using a Firefox or Chrome browser on my laptop and on my smartphone via the Ubiquity iOS video app.

.

.

Can I connect CCTV cameras directly to a TV?

.

CCTV cameras (usually) do not have HDMI but they may have coaxial out. See below:

The coaxial-out can be connected directly to the TV via the TV antenna input.

But this will work for one camera only.

You have options such as:

.

Is it possible to connect the CCTV DVR, and watch on your laptop?

.

There are lot of ways you can achieve this but let me talk on the simplest one.

By connecting the Ethernet port of your CCTV DVR to a switch and and hook up your PC to the same switch using RJ45 patch cable. Then go to the DVR network setup and set a static IP address if it is already enabled to use DHCP (dynamic Host Cofiguration Protocol). Set up something like this:

Save this and and restart your DVR for it to take effect.

Now head over to your PC Ethernet network configuration through control panel, go to your IPv4 and select “Use the following IP address”

Now enter something like this:

With this setting, the PC can successfully establish a link with the DVR through the gateway address.

Second Step:

Navigate to your internet explorer and type the DVR IP 192.168.001.010

you will be prompted to download an Active X, then follow the prompt and go to internet option on your internet explorer and enable the necessary Active X control, without doing this, you are not going to have your DVR web interface displayed properly.

watch this to learn how to enable Active X control

Once you are done with it, you should be able to see the number of channels, use exact user account on the DVR to login on your PC if prompted.

You will see Main Stream and Sub Stream, click on your desire channel and select Main Stream since you are not on the internet.

How do I connect DVR for CCTV on my PC sharing network?

.

How do I connect a CCTV camera to a laptop?

.

Connecting a CCTV (Closed-Circuit Television) camera to a laptop can be accomplished through several methods. Please note that the exact steps might slightly vary depending on the brand and model of your camera.

Here’s a general guide on how to connect a CCTV camera to a laptop:

Using a USB Adapter:

Using an External Video Capture Card:

Via Network (IP cameras):

In all cases, you’ll want to consult the user manual or contact the manufacturer’s customer support for the most accurate and specific instructions for your particular camera and laptop setup. Remember, it’s important to secure your camera feed to prevent unauthorized access.

.

.

How can I transfer CCTV footage from a DVR to a PC or mobile device?

.

To transfer CCTV footage from a DVR (Digital Video Recorder) to a PC or mobile device, you can follow these general steps:

1. Determine the DVR output: Check the available output options on your DVR. Most DVRs offer different types of outputs, such as HDMI, VGA, or BNC. Identify the appropriate output that matches the input options on your PC or mobile device.

2. Connect the DVR to the PC or mobile device:

– For PC: Use the corresponding cable (HDMI, VGA, etc.) to connect the DVR output to the PC input port. If the PC does not have the required input port, you may need to use an adapter or a video capture card.

– For mobile device: Some DVR systems provide apps that allow remote access and viewing of CCTV footage on mobile devices. Check if your DVR offers such an app and install it on your mobile device. Follow the instructions provided by the app to connect to your DVR remotely.

3. Software or app setup: If you are using a PC, you may need to install software provided by the DVR manufacturer to facilitate the transfer of footage. This software often allows you to access, view, and export footage from the DVR. Follow the installation instructions and set up the software as needed. If you are using a mobile device, make sure you have the DVR app installed and configured properly.

4. Access and export footage: Once the connection is established between the DVR and your PC or mobile device, use the software or app to access the CCTV footage. You should be able to view the recorded footage and select specific clips or timeframes for export. The export options may vary depending on the software or app, but commonly, you can save the footage as video files on your PC or mobile device.

It’s important to note that the specific steps and options may differ depending on the brand and model of your DVR system. Therefore, it’s recommended to consult the user manual or documentation provided by the DVR manufacturer for detailed instructions tailored to your device.

.

.

How do I connect my security cameras to my TV without a DVR?

.

Digital video recorders are a popular option for this connection. If you don’t want to hook up your security camera to a DVR, you can bypass the component and connect directly to a TV or monitor for viewing the signal from the camera.

You can now monitor any area under camera surveillance without recording

For home application, I recommend use cloud storage instead, easy install and operate.

.

.

What is the DVR used in CCTV?

.

In CCTV systems, a DVR stands for Digital Video Recorder. It’s a central component that acts like a storage device for the video footage captured by your security cameras. Here are some of its functionality:

Function: DVRs take the analog video signal from CCTV cameras, convert it into a digital format, and store it on a hard drive. This allows you to review past recordings for security purposes or to monitor activity remotely.

Appearance: DVRs are typically standalone devices that look like small computers. They have ports for connecting CCTV cameras, a monitor output for viewing footage, and a network connection for remote access (depending on the model).

Here are some additional points to consider about DVRs in CCTV systems

Compatibility: DVRs are designed to work with analog CCTV cameras. If you have IP cameras (digital cameras that transmit video over a network), you’ll need a Network Video Recorder (NVR) instead.

Storage Capacity: DVRs come with varying storage capacities. The amount of storage you need depends on the number of cameras you have, the recording resolution, and how long you want to keep footage.

Features: Modern DVRs offer various features such as motion detection recording, scheduled recording, and remote access through a mobile app.

.

.

How do I connect a CCTV DVR with the Internet using a 3G/4G data SIM?

.

If your DVR support 3G connection then you are good to go.

Unfortunately I won’t be able to provide you with pictures as DVR systems vary and I do not know your DVR brand.

First and foremost, I suggest you use Huwaei E303 dongle because it is one of the best dongle out there.

Make sure your sim card had already been provisioned for Data service by your ISP and don’t forget to obtain the APN details for your internet service.

Ensure cloud is enabled on your DVR by going through the setting icon.

Then head over to Network and look for the wireless service or 3G depending on the brand of your DVR.

Insert the 3G dongle to the back of your DVR and wait for the dongle to start blinking.

Select 3G and fill up the necessary information such as the APN details you got from the ISP.

After the settings, click save and restart, whenever the DVR is ready, you should see the dongle with a solid blue or green LED light showing that it is connected.

You should now be able to view your DVR online after the necessary remote view app installation and right configuration.

.

The IVSEC brand comprises Australian selected components and hardware, and software servers for local updates within Australia. IVSEC has grown quickly while expanding and maintaining excellent customer service. For any enquiries, please contact our friendly staff.

My smartphone is showing “offline” or “connect close” in the IVSEC X mobile app?

When adding your Recorder or cameras to the IVSEC X mobile app if a message says “Offline” or the device status is showing “Connect close” please check the following:

Example of Offline message

Example of Connect Close message

1) Check that the QR code, username and password details have been entered correctly into the IVSEC X app

A. Connect HDMI LCD and USB mouse to IVSEC Recorder

B. Click on the 4-square / arrow icon on the bottom left-hand corner of the screen

C. Check the name shown in Current user:

Note: The default user is admin but this may have been modified by the installer

D. Open the IVSEC X app on your phone

E. Press the “Human” icon of the top left-hand corner of the app

F. Press “Device List’

G. Press the square icon with a pencil mark

H. Check the IP Address/ID is the same as the QR code located on top of the IVSEC recorder

I. HTTP Port / Client Port

J. Check the username is the same name as per point C (this is case sensitive)

K. Enter the correct password

L. Press Save or Apply

2) Check for Network Connectivity

A. Check that an ethernet cable is connected to the LAN port of your modem

B. Check that the other end of the ethernet cable is connected to the LAN/WAN port of the IVSEC Recorder

C. Check that the Green and Yellow LEDs light up after connecting the cable.

NOTE: If the LEDS do not light up then the IVSEC X app will not work. Try replacing the ethernet cable, if still no LEDS light up contact your installer

D. Connect an LCD and USB mouse to the recorder and check the “connect status” icon that appears on the bottom right hand corner of the taskbar (when LCD is connected to recorder). Ensure that the icon has a green tick as shown in below image

Refer to explanation below of other connection status:

3) Ensure you have the latest version of IVSEC X app installed on your phone. Check that your Android or Apple device has the latest software/firmware and security updates installed. Try un-installing, re-installing the app and add the device again

4) Power your modem and IVSEC Recorder off for 30 seconds. Power back on and wait 5 minutes for the internet connection to come back online.

5) If you are running a VPN app on your smartphone disable the app and try the IVSEC X app again.

Examples of VPN providers include Surfshark, NordVPN, Norton’s VPN.

6) Check the IVSEC Recorder substream settings

A. Using LCD and mouse connected to NVR go to setup – Record – Encode Check your NVR substream settings- “Substream” tab

Recommended substream settings to minimise mobile app bandwidth issue

Resolution: 640 x 480

Bitrate: 512kbps

B. Click Apply on bottom right corner

Please refer to YouTube link: Adjusting stream settings via IVSEC X Mobile app

or

Please refer to YouTube link: Adjusting Camera stream settings via NVR (LCD & mouse required)

7) Some older Samsung phones running Android 11 on the Telstra network may be unable to stream live view or the cameras will show as offline while connected to mobile data (4G/5G). The issue has been identified on the Telstra network where an Android update causes the APN to select IPv6 only. Click here for APN re-configuration (Applies to Telstra mobile customers only running Android)

8) Some Telstra NBN modem / routers may restrict access to cameras (firmware issue on the router). The cameras may be slow to appear or show as offline. Check the model number listed on the bottom of your Telstra router. Click on the documentation below which details the steps to configure port forwarding as a workaround to access your cameras

9) Connect to your wifi and perform a speed test – https://www.speedtest.net/

Click the GO button. If your upload speed result is 3Mbps or less, you should contact your Internet Provider to test your connection

10) Email service@ivsecurity.com.au for additional support

iVSEC X Mobile App

1. How to set up the IVSEC X app on my Smartphone

The IVSEC X app allows you to access your IVSEC cameras live view remotely, playback recordings and other useful features
Please refer to YouTube link: https://youtu.be/71mvg5QdsfY

Scan the appropriate QR code below to download the IVSEC X app

Apple Store | Google Play

2. My smartphone is showing “connect close” in the IVSEC X mobile app?

Click here for troubleshooting details.

3. How to reduce camera buffering when accessing IVSEC cameras on the mobile app.

If you have limited or slow Internet connection (either at home or on your smartphone) reducing the substream settings can help the cameras to show up quicker on the app

Video guide – How to modify the settings via the IVSEC X mobile app

Video guide – How to modify the settings via the Recorder using an LCD and mouse

Recommended substream settings
Resolution: 640 x 480 | Bitrate: 256 kbps

Recommended mobile stream settings
Resolution: 640 x 480 | Bitrate: 128 kbps

4. What does “Max User Playback” mean?

If you see “Max User Playback” when trying to playback footage in the app it means someone else is currently accessing playback either via the NVR or through the app. Restarting the NVR will clear this message.

Access via Windows / Mac

5. How to install setup the VMS Pro application for Windows.

Video Guide

NOTE: VMS for Windows setup is similar for Mac

Application download links available from ivsecurity.com.au or via the YouTube description

6. How to login to an IVSEC NVR or camera using Internet Explorer or Chrome

Refer to “How to upgrade my NVR firmware” FAQs. Once your NVR is upgraded to the latest firmware you will be able to log in using any browser using the NVR IP address.

7. How can I search for IVSEC devices on a network or change an IP address

To search for X range cameras and recorders on a network use the Device Config Tool.

8. How to setup the surveillance client on Windows

Please note surveillance client is no longer supported, refer to VMS Pro. For legacy installations please refer to YouTube links below:

Windows | Mac

9. My MAC is not letting me install any of the IVSEC applications

If your MAC blocks the app from opening click here for details

10. How to playback and export footage from surveillance client on a Mac

Watch Video Guide

11. How to get my old IVSEC app working (non X range NVR model)

Check the model number of your recorder (silver sticker either on the top or bottom of the recorder. If the model number does NOT have an X in the model number then click here for instructions on how to configure your non X range IVSEC NVR using port forwarding and DDNS.

Recorder

12. How to reset my NVR password?

Download IVSEC NVR Password Reset Procedure

13. How to perform NVR firmware update using a USB flash drive or online update

Watch Video Guide

14. How to setup motion detection on an IVSEC X-Range NVR

Watch Video Guide

15. How to export footage from an IVSEC X-Range NVR

Watch Video Guide

16. How to factory default an IVSEC X-Range NVR

Watch Video Guide

17. How to configure disk grouping for 16, 32 and 64 channel IVSEC recorders

The maximum number of channels (cameras) that can record to one hard drive is 16. If your recorder is compatible with disk grouping (e.g. NR316XB, NR316XC, NR532XA, NR564XA, NR564EXA and NR564EXB) you will need to configure disk grouping and ensure your cameras are recording. If you are using an NVR that is capable of 64 channels and have 64 cameras installed, you will need to install a minimum of 4 hard drives

16 cameras installed = 1 hard drive required (minimum)

32 cameras installed = 2 hard drives required (minimum)

64 cameras installed = 4 hard drive required (minimum)

Video – Disk grouping setup process

IP Camera

18. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

19. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

20. How to Setup 3rd Party cameras onto an IVSEC X-Range NVR

Watch Video Guide
Download Device manager tool (for non X range IVSEC branded cameras)
Download IVSEC PTZ Search Tool (for non X range IVSEC branded cameras)
Hikvision camera setup using onvif
Dahua camera setup using onvif

21. How to add 2N IP Verso Intercom camera to an IVSEC NVR

Watch Video Guide

22. Camera image is randomly showing distortion on the bottom of the image

If you are experiencing distortion at the near the bottom of the camera image please click here for useful troubleshooting steps

23. Modifying White Light Settings

Some of the iVSEC camera range have inbuilt white lights (LEDs) that turn on at night as a deterrent to intruders and for colour recording at night. Please follow this guide to learn how to disable this function or have then turn on only when motion is detected.

Smart Home Integration

24. iVSEC – Alexa

Now it’s even easier to see what’s happening. Amazon Alexa can be used to stream live camera video to your Amazon Echo Spot or Echo Show device simply by speaking your commands. Follow this guide to learn how to connect to Amazon Alexa for voice control.

25. iVSEC – Google

Now it’s even easier to see what’s happening. You can ask your Google Assistant to show your Cameras on your TV with Chromecast. Read this guide to learn how to connect your cameras to your Google Assistant and enable voice control.

How to upgrade IVSEC NC323XD Camera Firmware For additional support go to https://ivsecurity.com.au/ or email service@ivsecurity.com.au Video will demonstrate how to upgrade IVSEC NC323XD camera firmware. NOTE: Firmware compatible with models NC323XD, NC531XB, NC512XC, NC512XD & NC528XC Download NC323XD firmware (link below) https://ivsecurity.com.au/support/fir… Copy the entire folder to USB flash drive Connect USB to NVR and watch video demonstrating how to perform the upgrade.

How to playback and export footage from surveillance client onto a MAC

How to playback and export footage from surveillance client onto a MAC To download Surveillance client and Device Config Tool (MAC) – https://www.dropbox.com/s/49enfbklip4… To download VLC for MAC – https://www.videolan.org/vlc/download… For more information visit https://ivsecurity.com.au/

This guide explains the setup for each option so that you can determine which one is best suited for your needs and scene.
.

.

How to find the camera’s light settings in its web interface:​

Even if the camera is connected to an NVR, before anything, you will need to log into the camera directly to access the advanced image and light settings to enable the different light modes, as these are not accessible from an NVR.
.

By default, your camera will be set to remain in ‘ColourVu only’ mode during low-light, meaning the white light will be constantly on when it is dark and never use its IR. The below sections will show you on how to configure the new ‘Smart Hybrid’ mode, ‘IR only’ mode, and ‘ColorVu only’ mode.
.

.

How do I set my camera to Smart Hybrid mode:​

This mode is utilises both the IR and white LEDs built into your camera. It is useful as it allows you to keep your cameras to stay discreet in IR mode while there is no activity in your scene, and then switch to full colour when a person or vehicle is detected by putting white light on the scene, providing you with all of the additional information a colour image offers while also acting as a deterrent.

Here are the steps to enable this mode:
.

How to Configure the Light Settings on Hikvision Cameras

How to Configure the Light Settings on Hikvision CamerasHow to Configure the Light Settings on Hikvision CamerasHow to Configure the Light Settings on Hikvision Cameras.

How do I set my camera to ‘IR only’ mode:​

This mode is recommended if you would like the camera to be as discreet as possible and your scene is dark at night, as the camera will use its IR LEDs all the time at night and then switch back to colour during the day, meaning the white light is never used.
.

.

How do I set my camera to ‘ColorVu only’ mode:​

This is the opposite to IR mode, as the camera will turn on its white light at night and keep it constantly on, meaning that its IR is never used. This mode is ideal if you are not worried about the camera being discreet and prefer a colour picture 24/7.
.

How do I set up events and email or push notifications on my Hikvision camera?

Video Analytics, or “VCA events”, are some of the most useful features available on a Hikvision camera. Using these will mean that your footage is analysed in real-time for any activity or abnormalities with your system that you would like to receive an alert for. The different events that are available currently (which ones are available varies which each model of camera) include:

This guide will cover the setup of three of the most popular event options:

Motion Detection – This is one of the first AI options that was introduced and will analyse your footage for any moving object in a specified part of your scene and can alert you as soon as it is detected. As it detects motion in its most basic sense, it uses less of a camera or NVR’s processing power than the other event options, meaning it is always available regardless of your video compression settings.

If you are not using a device with AcuSense then this option will give you the most false-positive alerts, as it offers the fewest ways for filtering out moving objects that you are not interested in, such as object size and the direction or duration of the motion.

Intrusion Detection – This is similar to motion detection in that it will alert you when a moving object is detected within a predefined “intrusion zone”. However, this is better if you want more control over when you are alerted as it will only notify you when a moving object enters the zone, rather than whenever movement occurs within it. This event type also allows you to specify the size of trigger objects, as well as how much of an object enters the zone and for how long before you are alerted.

Line Crossing Detection – This option is particularly useful for various entrances, boundaries, and roads, etc., as it allows you to draw a line in your scene so that you are notified when an object moves across that line. Importantly, you can specify the direction(s) of movement across the line on which you are notified. Like intrusion detection, you also have more control over the size of the trigger object and how much of it must cross the line.
.

Note – Before starting, you will need to check that your Default Gateway and DNS Server are correctly set up in your device’s network parameters, as these need to be right in order for you to be sent email notifications. To check these, please see part 2.​

​

.

Section 1: Setting up motion detection​

​

Step 1:​

Connect to your device’s web browser interface by browsing for its IP address and log into it. If it is recording to an NVR, then connect to this, as this is where you should set your events from.​

.

Step 2:​

Once you’re in, navigate to:​

​

Configuration → Event → Basic Event → Motion​

​

If you’re using an NVR, select your camera from the “Camera” dropdown.​

​

​

Note – To set one of the other VCA event options, you’ll need to go to “Smart Event” rather than “Basic Event”, where you will be shown a list of tabs with all the other available events on your camera. ​

​

Step 3:​

Tick the “Enable Motion Detection” box.​

​

​

Step 4:​

Decide if you want to enable “Dynamic Analysis for Motion”. When this is turned on, green squares will show on anything that triggers motion detection in the camera’s feed, which can help with identifying exactly what has triggered the event.​

​

​

Note – Cameras usually determine what is ‘motion’ in your scene by detecting pixel changes in the image, as a large amount of pixel change usually indicates movement. However, if there is lots of visible noise in your image due to gain control in low light, you will probably see a high number of false alerts on the camera. Using one of the more advanced event types, or the camera’s built-in LEDs to illuminate the scene, will help here. ​

​

Step 5:​

Once you’re happy with the view of your scene, click on the hexagon or “Draw Area” button in “Area Settings”, which will allow you to use your mouse to draw the area within which you would like motion detection to be active.​

​

On Easy IP 3.0 and earlier cameras, These areas will be indicated by a red grid or polygon that appears when you click on part of the scene.​

​

The newer cameras will get you to draw one solid shape for each of your detection areas by left-clicking to set each point of that shape. When you have set all the points that you need, right-clicking will complete the shape and allow you to draw any others that you need.​

​

To clear your zones, just click the cross or “Clear All” button.​

​

Note – If you are not using an AcuSense camera or NVR, then you should make sure that the edges of your detection zones are not on top of anywhere that is likely to see a lot of movement, shadows, or reflections (e.g. roads, foliage, windows or the sky), to mitigate the number of false triggers. ​

​

​

​

Step 6:​

If you’re using an EasyIP 4.0 camera, draw any more detection zones that you need by repeating step 5 above.​

​

​

​

Step 7:​

Adjust the “Sensitivity” bar if you need, which determines how sensitive the detection is to pixel changes. The higher the sensitivity, the more easily motion detection is triggered, meaning you will receive more alerts as a result.​

​

A good starting point for the sensitivity is 60, but you will likely need to tweak this yourself over time to identify the optimum setting for your scene.​

​

If there is lots of activity in your scene, then avoid setting the sensitivity too high so that you don’t receive lots of false-positive triggers.​

​

Note – In the case of Line Crossing and Intrusion Detection, the sensitivity setting refers to the amount of an object that is needed to cross the line, or enter the box that you’ve drawn, before the event is triggered. ​

​

​

.

Step 8:​

If you’re using AcuSense features, then use the “Detection Target” boxes to specify what you want to trigger the event. You can select both “Human” and “Vehicle” here if you are interested in both.​

​

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

.

Section 2: Setting up line crossing detection​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Line Crossing Detection​

​

If you’re using an NVR, select your camera from the dropdown at the top of the page.​

​

​

​

Step 2:​

Tick the “Enable Line Crossing Detection” box.​

​

​

​

Step 3:​

Click on the line button or “Draw Area” to draw your line on the video feed – you can move, rotate or resize however you like. ​

​

.

Step 4:​

Set your maximum and minimum target sizes by clicking the size filter buttons, and drawing these on the camera preview.​

​

Anything that crosses your line and is smaller than your minimum box, or larger than the maximum box, at the point of the line, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be slightly smaller than any car that’s near where I’ll draw my line, and the maximum to be slightly larger than a large HGV.​

.

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

​

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the box. There is no issue with ticking both “Human” and “Vehicle” here. ​

​

​

​

Step 6:​

Specify your “Direction”, which refers to the direction from which an object much cross your line to trigger the event. The different options available are explained beneath:​

​

A<->B – Any object crossing from either direction will trigger​

​

A->B – Any object crossing from side “A” to side “B” will trigger (In this case, from left to right)​

​

A<-B – Any object crossing from “B” to “A” will trigger (In this case, from right to left)​

​

​

​

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to cross your line before this is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend starting at 60 and then adjusting the bar over time until you find the best results. ​

​

​

​

Step 8:​

Use the “Line” dropdown to select and draw any more lines, repeating steps 2-8 above.​

​

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

​

.

Section 3: Setting up intrusion detection​

​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Intrusion Detection​

​

If connected to an NVR, select your camera from the dropdown at the top of the page.​

​

.

Step 2:​

Tick the “Enable Intrusion Detection” box.​

​

.

Step 3:​

Click on “Draw Area” to draw your intrusion zone (or “Detection Area”) on the video feed, which can be a 3 or 4 sided shape. Left-click on the camera preview to set each of these points. Once your zone is drawn, you can still move each of the points to change the shape to better fit your area of interest.​

​

Note – If the edges of your zone are very close to a road, foliage, or anywhere that is likely to see lots of movement, then you will likely see a number of false-positive alerts. This is because any movement on these lines can trigger the event. If you can, you should allow for a bit of a gap between these parts of the scene and your intrusion zone. ​

​

​

​

Step 4:​

Set your maximum and minimum target sizes by clicking the “Size Filter” buttons, and drawing these on the live camera feed above.​

​

Anything that enters your configured intrusion detection zone and is smaller than your “Min” box, or larger than the “Max” box, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be smaller than the smallest person I’d expect to see in that part of the scene, and the maximum to comfortably cover a very tall person.​

​

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

.

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the relevant box. There is no issue with ticking both “Human” and “Vehicle” here.​

​

.

Step 6:​

Now, adjust the “Threshold” bar as you need. This can be set between 1 and 10 seconds and refers to how long an object needs to be within your intrusion zone before triggering the event. For example, setting this to “0” will mean that the event is triggered as soon as a valid target enters your zone.​

​

.

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to enter your zone before the event is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend setting this to 60 and then adjusting the bar over time until you find the best results.​

​

​

​

Step 8:​

Use the “Region” dropdown to select and draw any more intrusion zones, repeating steps 2-6 above.​

​

​

Step 9:​

Click on the “Arming Schedule” tab and set this by filling in the hours you want the event to be enabled for in blue.​

​

Note – Please see section [1] step 9 above for a more detailed explanation on how to set your arming schedule. ​

​

​

Step 10:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

.

.

Section 4: Setting the Arming Schedule for your events​

Now that you have set your “Area Settings”, click on the “Arming Schedule” tab to set when the event will be active.

This will bring up a timeline with the week broken up into days and hours – depending on the device that you are using, it might look different to the grid below. If a period is filled in blue then the event will be active (or “armed”) for that hour; If the period is white, the event will be off.

Use your mouse to draw up the weekly Arming Schedule that suits. You can also use the popup box that appears when you click on any blue period to finely adjust the start arming times:
.

Clicking on the “Erase” button and then a blue period will allow you to clear the arming:
.

When you’re happy with this schedule, click “Save”.

.

.

Section 5: Setting up email & push notifications for your events​

.

Click on the Linkage Method tab on the event’s page (shown above), which is where you will set up your email notifications, as well as other alert types.​

​

The different options are explained below:​

​

Audible Warning: This will cause the NVR / browser to bleep when on event triggers.​

Send Email: This will set the NVR to email you on event triggers, with a screenshot of the camera’s view at the time.​

Notify Surveillance Centre: This refers to Hik-Connect and needs to be activated in order to receive push notifications in Hik-Connect.​

Full Screen Monitoring: This will get the NVR to automatically throw up a camera’s live feed in full screen during a trigger for an event set on that camera.​

​

​

.

.

To enable Hik-Connect push notifications:​

.

To set up push notifications, you need to make sure that Notify Surveillance Centre is ticked as a “Linkage Method”.​

​

You also need to make sure that push notifications are enabled for Hik-Connect in your phone’s settings. To enable them via the app, go to:​

​

More → Settings → Enable Push Notification​

​

​

……..

.

.

Annke Vision – Access the DVR/NVR/IP Camera via Guarding Vision Software on PC (Via IP Address)

This article shows you the steps to access the ANNKE system on a computer via the client software Guarding Vision.

Adding via IP address only allow local access (ANNKE system and computer must be in the same network/router). But you will get a better experience when watching camera live view/playback and download recordings, etc.

To access the system remotely on Guarding Vision, please add via P2P Cloud. See this instruction.

 Read Also : LongPlus Apps FAQ

Video Guide:

Step by Step:

1. Download and install the software Guarding Vision on your computer.

For Windows, click here to download.
For Mac, click here to download.

2. Plug the ANNKE system into your router via an Ethernet cable.

3. Make sure your computer has been connected to the same router as the ANNKE system/IP camera.

4. Run the software Guarding Vision. Register an administrator account.

Note: This account is only for logging in to Guarding Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login)

5. Run the software, and go to Device Management -> Device Type -> Device.
If the system and computer are in the same LAN network, you can see the device information under the Online Device list. Select your device, click on Add to Client.

6. On the pop-up page, set the details as the picture below shows, then click on ‘Add’.

Note:

7. The device information will then be shown on the tab page Device for Management. You can see the Net Status is online as the picture shows..

8. Go to the Main View tab page, click on the folder under the Camera list to expand the camera channels. Double-click on the channels to see the live streaming.

.

PS: If the camera list does not show any cameras, as shown below. Please go to the Device Management page and manually add the “Group” and name it. And then, please import the Group and select “import all”. Finally, we can go back to the Main View  tab page, and click on the folder under the Camera list to expand the camera channels. Double-click on the channels to see the live streaming.

Annke Vision – Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud)

This article shows you the steps to access the ANNKE system on a computer via the client software ANNKE Vision.

Adding via P2P Cloud allows remote access (ANNKE system and computer can be in the different network/router). While you may find the camera live view/playback and recordings download become laggy due to unstable network.

To access the system locally on ANNKE Vision, please add via IP address. See this instruction.

Steps:

1. Download and install the software Annke Vision on your computer.

Here is the download link:

https://download.annke.com/software/HK/Annke_Vision_V3.7.0.50_E.exe

2. Plug the ANNKE system into your router via an Ethernet cable.

3. Run the software ANNKE Vision. Register an administrator account and set up Password Protection.

Note: This account is only for logging in to ANNKE Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login”)

The username and password can be anything. 

4. Register an account (P2P account) on the mobile app Annke Vision.
Register an account on Annke Vision via your phone number or email address.

5. Come back to ANNKE Vision. Go to Device Management and click Add.  Choose Cloud P2P and select your country/area(the phone APP account area), and click Login.

7. Then log in with the user name and password of your Annke Vision APP account. 

Note: If your user name is the phone number, please input it in this format ‘+441234567890‘ (no space between the country code and the phone number).

If the user name and password are both correct, but the App keeps asking you entering a verification code, please log in again with email address that you used to register the Annke Vision App.

8. If the ANNKE system has been added to the Annke Vision account beforehand, you can see it on the list automatically.
Otherwise, add the system to ANNKE vision account first..

9. Go to the Main View tab page, and click on the folder(the name is your APP account username) under the device list to expand the camera channels. Click the play button on the channels to see the live streaming...

Annke Vision – Access the DVR/NVR System via ANNKE Vision Software on PC (Via IP Address)

This article shows you the steps to access the ANNKE system on a computer via the client software ANNKE Vision.

Adding via IP address only allow local access (ANNKE system and computer must be in the same network/router). But you will get a better experience when watching the camera live view/playback and download recordings, etc.

To access the system remotely on ANNKE Vision, please add via P2P Cloud. See this instruction.

Step by Step:

1. Download and install the software ANNKE Vision on your computer. Here is the download link:

https://download.annke.com/software/HK/Annke_Vision_V3.7.0.50_E.exe

2. Plug the ANNKE system into your router via an Ethernet cable.

3. Make sure your computer has been connected to the same router as the ANNKE system.

4. Run the software ANNKE Vision. Register an administrator account and set up Password Protection.

Note: This account is only for logging in to ANNKE Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login”)

The username and password can be anything. 

5. Run the software, and go to Device Management.

6. Click Online Device. If the system and computer are in the same LAN network, you can see the device information at the bottom. 

7. Select your device, and click on Add. Then please fill in the information in the popped window.

Note:

8. The device information will then be shown on the tab page Device for Management. You can see the Net Status is online as the picture shows..

9. Go to the Main View tab page, and click on the folder under the DVR list to expand the camera channels. Click the play button on the channels to see the live streaming..

.

Annke Vision – How to Live Stream Your ANNKE Device on YouTube by FFmpeg?

Using FFmpeg as an encoder for YouTube Live has fewer requirements on the hardware. While you may need some basic knowledge about FFmpeg.

Contents:

1. How it works?

2. How to achieve it?

3. Installing FFmpeg

4. Set a Static IP Address for your ANNKE device

5. Set up DDNS for your ANNKE device

6. Get the RTSP address

1. How it works?

With the RTSP address from your ANNKE device, and FFmpeg installed on your Windows computer, you can use the below command line in the CMD software to begin a live stream. The live stream will be uploaded to your YouTube channel automatically.

set USERNAME=device login username
set PASSWORD=device login password
set CAMERA=device IP
set STREAM_KEY=xxxx-xxxx-xxxx-xxxx from YouTube Live dashboard

Example：

ffmpeg -hide_banner -loglevel fatal -rtsp_transport tcp -i rtsp://%USERNAME%:%PASSWORD%@%CAMERA%:554/ Streaming/Channes/ID/?transportmode=unicast.sdp -f lavfi -i anullsrc -c:v copy -c:a aac -map 0:v -map 1 -f hls -hls_time 4 -hls_playlist_type event -method PUT “https://a.upload.youtube.com /http_upload_hls?cid=%STREAM_KEY%&copy=0&file=stream.m3u8”

2. How to achieve it?

To achieve the above, we will need to:
1). Install FFmpeg on your Windows computer.
2). Get the RTSP address. For a stable RTSP address, we will need to set a Static IP and set up DDNS for your ANNKE device.
3). Get the YouTube stream key: Once your YouTube account has access to YouTube Live, you can find the stream key as the below picture shows.
.

3. Installing FFmpeg

Here is the instruction: https://www.wikihow.com/Install-FFmpeg-on-Windows#

4. Set a Static IP Address for your ANNKE device

Propose: An ANNKE Device with a static IP address can still be accessed by the same IP after reboot.

Step:
1) Disable DHCP
2) Make sure the device is online

1) Disable DHCP
Log in to your ANNKE Device. Below is the Web interface of the ANNKE device:
Go to Configuration-Network-Basic Settings-TCP/IP, Uncheck DHCP, fill in the below box per your computer in the same network.
Note: You can check DHCP and click Save at first, this will fill in the below box automatically. Then uncheck DHCP and leave the below box as they are.

2) Make sure the device is online
After the above, go to Configuration-Network-Advance Settings-Platform Access, make sure the option Enable is checked and Register Status shows Online as below picture.

If it shows Offline, refer to this instruction to make it online at first: https://help.annke.com/hc/en-us/articles/360000648061

5. Set up DDNS for your ANNKE device

Propose: An ANNKE device with DDNS service will have a static IP/hostname on the Internet. This allow you to visit the ANNKE device by a static URL. To achieve this, Port Forwarding on your router is also required.

Steps:
1) Setup your DDNS account
2) Enable DDNS on your ANNKE device
3) Port Forwarding

1) Setup your DDNS account
There are some free DDNS service providers. In this article, we will take NO-IP for example.
After you created an account on the NO-IP website, Click your name at the top right corner, go to Account, then Dynamic DNS
Click Create Hostname

Create your hostname in the box. Leave other parameters as default, click Create Hostname

You will see the hostname in the list.

2) Enable DDNS on your ANNKE device
Log in to your device, go to Configuration-Network-Basic Settings-DDNS, tick on Enable DDNS, fill in the boxes as below:
DDNS Type: NO-IP
Server Address: dynupdate.no-ip.com
Domain: your hostname on no-ip.com
User Name: your user name on no-ip.com
Password & Confirm: your account password on no-ip.com
Then click Save to apply the change.
.

3) Port Forwarding

Purpose: Port forwarding allows other devices to visit a device in your local network.

Steps:
The steps may vary according to different routers. Below steps are based on the router Virgin Media Hub 3.0:

Click Create a new rule, then fill the boxes as below:
Local IP: your device’s IP.
Local start port: 554
Local end port: 554
External start port: 554
External end port: 554
After that, click Add rule to apply the change.

Now, you can go to canyouseeme.org, input your port number in the Port to Check box, and click Check Port. If you can see the message ‘Success, I can see your service on [your WAN IP] on port (554)’, then the port forwarding has finished.

6. Get the RTSP address

Steps:
1) RTSP address format
2) Test your RTSP address

1) RTSP address format
rtsp://IP:RTSPPort/Streaming/Channes/ID/?transportmode=unicast.sdp

Explanation
ID means mainstream or sub-stream and channel number. If the ID is 102, we will get
a sub-stream of the first channel. If the ID is 101, we will get mainstream.
RTSP URL supports to add username and password:
rtsp://admin:12345@IP:Port/Streaming/Channels/ID/?transportmode=unicast.sdp
The type of authorization supports BASIC and DIGEST.

Examples
Get sub-stream from IP camera on channel 1
rtsp://172.28.1.52:554/Streaming/Channels/102/?transportmode=unicast.sdp

2) Test your RTSP address
Once you finish getting the RSTP address, try it on the VLC player to make sure it’s working.
In VLC player, use the shortcut Ctrl+N or navigate to Media-Open Network Stream. Input your RTSP address in the box, click Play.
When the RTSP address is correct, you will see the live stream from your camera in about 5 seconds.

Annke Vision – Annke IP camera connect with Tinycam Pro

For the Tinycam can only working with IP cameras, It can not connect with NVR. So if you have already had a POE system( NVR+ IP camera), It can not directly get the steam from the POE port. Please connect the IP cameras directly to your router. Please do not forget to have an extended power ( 12V/1A ) for the cameras.
The APP Timycam can only support IP connection, so If you would like to have the image everywhere, Please do the port forwarding for the cameras, you need to contact the router manufactory or network provider to have the correct operation.

If you find the image is not smooth. That is caused by that the app will auto-adjust the stream for the image. so you can change the APP decode method or you can directly change the cameras’ video stream, you can adjust lower the resolution and bitrate from cameras’ setting page.

Step:

1.Adding the cameras. Please select “Add IP camera, NVR/DVR” and edit it.

2. Edit the camera name and select the correct Protocol type by the camera brand.

Please notice that the Tinycam Pro can not directly get Annke Brand, So you need to select the camera brand “Hikvision” and choose a model number( everyone is ok). Don’t worry, our connection protocol is the same as Hikvision.

3. Please input the correct IP and port information. 

“Hostname/IP address“: It would be LAN IP. WAN IP or DDNS. But please notice that If you connect with WAN IP or DDNS, Please do not forget the port forwarding.
“Web port number“: Default is 80. It follows with your camera setting.
“RTSP port number“: Default is 554. It follows with your camera setting.

3. Input the correct account information. the account information is your cameras’ account and password.

4. When you finished the parameter setting, you need to back to the top line to check the connection status.

“OK” means the camera is correct to connect to your system.

Click the “camera status“, you can get the detail stream information and image.

5. When you finish the camera setting, you can directly go to the live view to have the camera image.

Annke Vision – How to Activate ANNKE IP Camera via Web Browser (Without DVR/NVR)?

You may find the camera’s IP address and access/activate it on the local network via the web browser.

Video Guide:

 https://youtu.be/Z5jRKJ5UNQw

Text Guide:

1. Power on the camera by using the power adapter or POE switch for the POE cameras.

2. Connect the camera to the router/POE switch by ethernet cable.

3. Get a computer that is connected to the same router. In other words, computers and cameras are in the same network area.

4. Download software SADPTool and install it on the computer. Here is the software download link.

For Windows: https://download.annke.com/CMS/SADP_v3.0.2.4.zip
For Mac: https://download.annke.com/CMS/sadptool.pkg_.zip

5. Run the software SADP tool and click refresh. It will find the camera’s IP, and its status is Inactive.
Note: If the status is Active and the camera was connected to the ANNKE NVR before, the password of the camera is the same as the NVR.

6. Select the device on the tool and create a new password to activate it.
The new password should contain 8-16 characters with at least two combinations of numbers, lowercase, uppercase, and special characters, no ‘admin’ included.

7. Access the camera by inputting the IP address of the camera on the IE web browser. 
Then, input the user name admin and password you created.
Note: The cameras could be viewed on the IE web browser only because there is no web plug-in for any other web browser now.

8. Click the link to download the web plug-in to view the camera:

9. Once the web plug-in is installed successfully, the camera could be viewed on the web browser:

.

Annke Vision – How to Access DVR/NVR System on The Web Browser from PC(in the Same Local Network)?

Safari browser is not supported.

The following browsers are supported:
IE 10, IE 11, Chrome 57.0+, Firefox 52.0+ and Edge 89+

Our device plugin is most compatible with IE 10 and IE 11 browsers. In IE browser we can view the device and modify the relevant settings more smoothly.

For Chrome 57.0+, Firefox 52.0+ and Edge 89+ browsers, we can view the device without the plugin. But please note that we still need to download the plugin if we want to change the relevant device settings from them.

(Here is an image for your reference to download the plugin)

General steps:

1. Plug the DVR/NVR into a router with a network cable.

2. Find DVR/NVR’s IP address.  There are two ways to find the IP address:
.

Method #1

1) Find the IP address on the TV/monitor.

Please go to Menu–Configuration–Network–General.

.

Method #2

Find the IP address on a computer.

Annke Vision — How to Access the Web interface of ANNKE PoE Cameras via Browser? (Without NVR)

Purpose: Some features of the ANNKE PoE camera need to be configured on the camera’s Web interface (it’s individual setting page).

Note:

Safari browser is not supported.

The following browsers are supported:
IE 10, IE 11, Chrome 57.0+, Firefox 52.0+ and Edge 89+

Our device plugin is most compatible with IE 10 and IE 11 browsers. In IE browser we can view the device and modify the relevant settings more smoothly.

For Chrome 57.0+, Firefox 52.0+ and Edge 89+ browsers, we can view the device without the plugin. But please note that we still need to download the plugin if we want to change the relevant device settings from them.

(Here is an image for your reference to download the plugin)

1) For all the mentioned camera models, their live stream will work on the IE browser after installing the plugin.
2) For model I91BM/I91BN/I91BL/I91BK/I81HB, their live stream can also work on Chrome and Firefox after installing the plugin.

Steps:

1. Connect the camera to a 12V DC power supply (must be 12 Volt, can be 1 Amp or above) and to a broadband router by ethernet cable.

2. Run the SADP software on a computer in the local network.

For Windows system:

https://download.annke.com/CMS/SADP_v3.0.2.4.zip

For Mac OS:

https://download.annke.com/document/Computer_Software/SADPTool.pkg.zip

The SADP will detect the camera’s IP address. Follow the below picture to enable DHCP for the camera.

Input the IP address in a Web browser ( IE browser is recommended).

3. Input the user name and password of the camera to log in. (Generally, the username is “admin” with all letters in lowercase)
If you use the camera for the first time, you need to activate the camera at first and set an admin password for it;
If the camera has been activated on the ANNKE NVR, the camera’s password is the same as your NVR’s admin password.

4. Now you can see the camera’s Web interface. Explore and have fun 🙂

Note:
If you find the camera live view fail to load when clicking the button “Start Live View “on the webpage, please try the below solutions:
1. Click the “Download Plug-in” button to download and install the webpage plugin.
2. Copy the webpage address then visit it via IE browser, or via Microsoft Edge browser (requires reloading the page into IE mode).

.

Annke Vision – How to Access the Annke IP Camera’s Setting Page via Web Browsers?

Some of the cameras’ functions can only be configured in their individual setting page. Below is the instruction to enter Annke’s IP cameras’ individual setting page.

Step 1:

Connect your IP camera and your computer to the same network/router. The connection can be either via ethernet cable or WiFi.

Step 2:

Find the IP address of your IP camera. The procedures depend on your computer.

  a). If your computer is NOT a Windows computer: Please access your router to find the camera’s IP address (You may need to contact your router’s seller for further information).

b). If your computer is a Windows computer: You can use the software called SADP TOOL to find the IP address. Below are the steps:
b-1). Please download and install the software SADPTOOL.exe to your computer: 
https://download.annke.com/CMS/SADP_v3.0.2.4.zip
b-2). Run the software and you will find the camera’s IP address on the device list.


b-3). Double-click on the IP address (or input it into your web browser manually) then you will see the camera’s login page. Input the user name ‘admin’ and the camera’s password to proceed.


b-4). Click on the Configuration tab to enter the camera’s settings page.

Note: The web page layout may be a little different according to different camera models.

Annke Vision – Modify Output Resolution of ANNKE Systems on the Web Interface

Purpose: This instruction introduces the method to change the output resolution of the ANNKE system. It is effective when the ANNKE system doesn’t show any display on the TV/monitor due to a mismatch of output resolution between them.

Steps:

1.Connect your ANNKE system to your home router via an ethernet cable.

2.Connect your computer to the same router with the DVR wired or wirelessly.

3.Download the SADP software on your computer to search the IP of your DVR/NVR. 
For Windows: https://download.annke.com/CMS/SADP_v3.0.2.4.zip
For MacBook: https://download.annke.com/document/Computer_Software/SADPTool.pkg.zip 

4.Run SADP and it will show the IP address of your DVR/NVR automatically.

5.Input this IP address into the IE browser. The user name is ‘admin’ and the password is your system‘s login password.

6.When you log in, navigate to Configuration–System–System Settings–Menu Output. Change the VGA/HDMI resolution. It’s recommended to match this resolution to your TV/monitor resolution.
If you are not sure, just select the lowest resolution for the ANNKE system.

If this article is helpful to you, please click the “helpful” button after you review it. Any comments would be appreciated.

.

Annke Vision – How to Restore the DVR/NVR on Computer Browser with Its IP Address Locally?

Steps:

1. Enter the DVR/NVR on the computer browser with its IP locally. Please refer to the below link:
https://help.annke.com/hc/en-us/articles/360000252182

2. After you enter the DVR/NVR on the computer browser, please go to Configuration>Maintenance>Upgrade&Maintenance>Restore.

3. Click ‘Restore’ to start. The system will be rebooted automatically when the restore is finished.

If this article is helpful to you, please click the “helpful” button after you review it. Any comments would be appreciated.

.

Annke Vision – How to Get a Capture/Screenshot of the Camera’s Image on the Computer/Phone APP?

First of all, please add the cameras system to computer software and the phone APP.

For computer software: https://help.annke.com/hc/en-us/articles/360000252441

For phone APP: https://help.annke.com/hc/en-us/articles/360000252581

Secondly, please follow the below steps to get the capture/screenshot of the camera’s image:

On Guarding Vision, please select the camera and right-click the mouse, and then click Capture:

After that, the capture will be saved on the computer, and you could click the link on the right corner to check the capture directly:

On the phone APP, please preview the cameras, and then select the camera button to take a screenshot for the camera:

After that, you could check the screenshot of the camera’s image on the More–>Pictures and Videos:

If you view the cameras on the monitor and the computer, please select the camera and double-check it. Or please view the camera in one screen mode. After that, the camera will be displayed in the mainstream and the picture will be clearer so that you could get a clearer capture from the computer.

If you view the cameras on the phone APP, you could switch the mode from Basic to HD so that you could get a clearer screenshot from the mobile phone.

.

Annke Vision – How to Stop Audible Alarming Via the Browser?

Purpose: If you want to stop audible alarming for the system, please refer to this instruction to change the setting.

Steps:

1. Please get a windows computer which is in the same network area as the camera is. In other words, the camera and computer must be connected to the same router, by cable or by wifi.

2 Install the software on the computer. Here is the download link.
support.annke.com/document/HK/general/tool/SADPtool.exe

3. Run the software to detect the system’s IP.

4. Please copy the IP address to Internet Explorer and access the system’s page by its IP. 

6. Please log in to the system and go to the Configuration-Basic event.
On this page, you could disable the audible warning for every event.
Here are the images of each interface. You could go to the interface of these setting to turn off the audible warning according to your needs.

For example, if you don’t want to have an audible warning when there is a motion detected, please go to the Motion Detection page to disable the audible warning. See the first picture below:

You could also go to smart event to disable the audible warning. Please note that this option is not available on all models and systems.

.

Note

Network traffic charges may be produced during the use of the Mobile Client. For details, refer to the local ISP.

.

.

.

.

System Requirement

Android 4.4 or later versions.

Conventions

In the following chapters, we simplify LTS Connect mobile client (Android) as “Mobile Client”, devices such as DVR, NVR, encoder, and network camera as “device”, and devices which support being added to PT Cloud service as “PT Cloud Device”.

Chapter 2 Visitor Mode

.

Visitor mode allows you to manage devices on the Mobile Client without registration. When you log in as a visitor, a visitor account will be created for you automatically, and the account will not change on the same phone or tablet.

.

.

Caution

For information security, please use visitor mode cautiously, which is NOT password-protected.

.

.

.

Note

In visitor mode, you can only manage your devices on a same phone or tablet. To avoid this inconvenience, you can register an account. For details about registering account in visitor mode, see Register an Account in Visitor Mode.

LTS Connect Android User Manual

Read More : LTS Sapphire Password Reset Guide

.

.

.

Most of the functions supported in a registered account are supported in visitor mode. Tap Visitor Mode on the Home page or the Login page to enter visitor mode.

The followings are the functions supported in visitor mode.

Device Management

Add devices to the Mobile Client and configure device settings. See Add Device for Management

and Configure Your Device for details.

Sharing Device

Tap → Scan QR Code to scan the QR code of another visitor account to share device(s) to the account. For details about sharing device, see Device Sharing.

.

Note

To get the QR code of a visitor account, go to More → Account Management.

.

.

Live View and Playback

View live video of the added devices and play back the videos. See Live View and Playback for details.

Access Control

Control door status and check access control events. See Manage Access Control Devices for details.

.

.

Note

Make sure you have added access control devices to the Mobile Client.

.

.

Alarm Configuration

Configure the alarm notifications on Alarm Notification page. See Notification for details.

.

Though the visitor mode allows you to manage devices without registration, you can only manage your devices on one phone or tablet. With a registered account, you can manage devices on different phones or tablets.

Steps

.

See Register by Email Address and Register by Mobile Phone Number for details.

.

Chapter 3 Registration

.

You can register an account by your mobile phone number or your email address. With a registered account, you can log in to the Mobile Clients running on different mobile phones or tablets, which provides convenience for managing your devices.

.

Note

You can use visitor mode to manage your devices without registration. See Visitor Mode for details.

.

.

.

You can register an account by your email address.

Steps

.

We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

.

.

.

You can register an account by your mobile phone number.

Steps

.

We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

.

.

Chapter 4 Device Management

.

You need to add devices to the Mobile Client before you can do further remote operations such as live view and playback.

The devices added to the Mobile Client will be displayed in the device list.

In the device list, the video resources are displayed as the thumbnails of their video channel images; the security control resources, doorbells, and access control resources are displayed as device pictures.

.

You need to add devices to the Mobile Client first so that subsequent operations such as live view and playback can be available. If you want to receive alarm event information from a device, you should add it by scanning QR code or LTS connect domain.

.

Note

For details about managing alarm event information, see Notification.

.

.

The Mobile Client can detect the online devices in the same local area network with your phone or tablet, and you can add the detected online devices to the Mobile Client.

Before You Start

Make sure the devices are connected to the same local area network with the phone or tablet.

Steps

1.On the device list page, tap → Online Device to enter the Online Device page. All detected online devices will be in the list.

2.Select a device for adding.

.

Figure 4-1 Online Device

.

Note

.

3.Optional: Edit the network information.

1)Tap .

2)Change the device IP address to the same LAN as your phone’s by either editing the IP address manually or enabling the device DHCP function.

3)Tap and input the admin password of the device to save the settings.

4.Tap Add.

5.Enter the required information, including device alias, user name and the password.

6.Tap .

7.Optional:  Tap the device name or tap , and then tap Delete Device.

.

You can add the device by scanning the device’s QR code. You can also add device(s) by scanning the QR code obtained via the web page of the device.

Steps

1.On the device list page, tap → Scan QR Code to enter the Scan QR Code page.

2.Scan the QR code.

–Scan the QR code by aligning the QR Code with the scanning frame.

Note

.

.

.

to enable the flashlight if the scanning environment is too dark.

–If there are QR codes in photo album of the phone or tablet, tap to extract QR code from local album.

3.Optional: Perform the following operations if the following situations occur.

–If the system fails to recognize the QR code, tap to add the device manually.

–If the device has been added to another account, you should unbind the device from the account first. See Unbind Device from Its Original Account for details.

–If the device is offline, you should connect a network for the device. For details, see Connect Offline Device to Network for details.

–If the device is not activated, the Activate Device page will pop up (excluding the access control device). You should activate the device. For details, see Set a Password to Activate a Device for details.

–If the PT cloud service is disabled for the device, you should enable the function (excluding the access control device). For details, see Enable PT Cloud Service When Adding Device on Mobile Client for details.

4.Tap Add on the Result page.

5.Enter the device verification code. The device will be added successfully.

Note

.

.

.

.

.

7.Tap Finish.

8.Optional: Tap the device name or tap , and then tap Delete Device.

.

You can add the device by fixed IP address or domain name. The streaming speed of devices added by IP/domain is faster than those added by LTS Connect domain.

Before You Start

If you want to add the access control device, activate it before adding. See the user manual of the access control device for details.

Steps

1.Tap and select Manual Adding.

2.Select IP/Domain as the adding type.

3.Enter the required information, such as alias, address, user name, camera No. and device password.

Address

Device IP address or domain name.

Camera No.

The number of the camera(s) under the device can be obtained after the device is successfully added.

4.Tap to add the device.

Note

.

.

.

.

Star Live View  Tap Start Live View to view the live view of the device.

.

Delete a Device  Tap and then tap Delete to delete the device.

.

.

Remote Controller  Tap and then tap Remote Controller to remotely control the device.

.

.

For devices which support PT Cloud service (a cloud service), you can add them manually by LTS Connect domain.

Before You Start

Make sure the device is powered on.

Steps

1.On the device list page, tap → Manual Adding to enter the Add Device page.

2.Select LTS Connect Domain as the adding type.

3.Enter the device serial No. manually.

Note

.

.

4.Tap to search the device.

Note

.

.

.

.

.

.

.

8.Tap Finish.

9.Optional: Tap the device name or tap , and then tap Delete Device.

.

When adding a device, if the device is not activated, a window will pop up to ask you to activate the device.

Before You Start

The device to be activated and the phone running the Mobile Client should be on the same LAN.

Steps

.

If you forget the password in the future, you might need to reset the device.

.

.

.

When adding a device to the Mobile Client, if the device is offline, you should connect the device to a network first. The Mobile Client provides the following four methods for connecting offline devices to networks.

Connect to Wired Network

Use this method if a router is available for the device to connect to.

.

Note

Make sure the device is powered on.

.

.

Connect to Wireless Network

Use this method if a wireless network is available for the device to connect to. “Device” here excludes wireless doorbell, wireless security control panel, and Mini Trooper (a kind of battery camera).

.

Note

.