Featuring an extensive and highly skilled R&D workforce, Hikvision manufactures a full suite of comprehensive products and solutions for a broad range of vertical markets. In addition to the security industry, Hikvision extends its reach to smart home tech, industrial automation, and automotive electronics industries to achieve its long-term vision. 

.

Password Reset

This page will guide you in resetting passwords on your Hikvision devices.

For end users: 

We highly recommend “4 Ways of Self-service Password Reset” (you can see the Tutorial video here). Please note that not all Hikvision devices support all these methods. Go to the “Forget Password” page to check the various methods supported by your product.

For installers: 

You can easily reset a password using the Hik-Partner Pro mobile app. 

Check out the tutorials below to discover the quickest way to reset a password. If you have any questions during the process, please contact Hikvision (Find the contact of Hikvision technical support team) or see Troubleshooting Tips of Password Reset Failed Issue here.

Note: Also try the Password Hints function to help you recall your original password. This function is only available for NVRs (76Q-series, K-series, K-series with AcuSense) with firmware V4.75.000 and later. Learn more here.

Self-service password reset

Via account verification

Prerequisite:

The device has been added to the Hik-Connect or Hik-Partner Pro account.

.

Prerequisite:

A reserved email address has been set up by the user.

Prerequisite:

Security questions have been set by the user.

Prerequisite:

The GUID file has been exported and saved by the user. 

.

Password reset via XML file

Prerequisite:

The Hikvision devices can be detected on the same LAN.

Hikvision How to & FAQ

Also Read : Hikvision How-To Tutorials Part1

.

How to Check Device Serial Number

.

How to Find Device Firmware Version

.

How to add IPC with POE function to NVR

Description

POE cameras could be added into NVR which supports POE function with both Manual mode and Plug-and-Play mode. When applying the Plug-and-Play mode, please kindly make sure the password of the camera is the same with the NVR, or you could set the password of the camera to 12345.

Note: Plug-and-Play mode could only be applied when the camera is added directly to the POE port of a NVR.

999

Download the FAQ

How to Enable Hik-Connect Service in Device

Summary

Hik-Connect is a new service introduced by Hikvision which integrates the dynamic domain name service along with alarm push notification service. It provides an easy way for devices to connect to the Internet.

This manual is a guide for users to show them how to enable Hik-Connect service in device.

Discretion

User interface may not be identical to the instructions shown below depending on the product, firmware version. However, the information and settings required to setup Hik-Connect services are similar across all supporting products.

Preparation

Users need to upgrade device to proper firmware that supports Hik-Connect Service.

999

Download the FAQ

.

How to Unbind Device from Hik-Connect Account

Description

One device can be added only by one Hik-Connect account, if the device was added by other account, you cannot add it again. You can follow steps below to unbind your device or check the video which can help you.

Youtube video link

How to Unbind Device via Hik-Connect APP

How to unbind device via SADP tool

999

Download the FAQ

.

How to Solve Hik-Connect Offline Issue

Description

When our customer adds a device to the Hik-Connect account and the APP returns device is offline, we can follow steps below to solve the problem or locate the causes. 

999

Download the FAQ

.

How to Configure Communication Mode of AX PRO

There are three types of Communication Mode via Communication > Cloud Service > Communication Mode:

Wired Network & Wi-Fi Priority

It means that Wired Network, Wi-Fi Network, Cellular Data are all supported, AX Pro will choose best network status and change connecting ways when network is not stable. It is recommended to use this mode when your device is with complex network environment, since it can help you select better way automatically. 

Wired & Wi-Fi 

It means that only Wired Network and Wi-Fi Network are supported, AX Pro can only connect with wired or Wi-Fi. It is recommended to use this mode when you want to save cellular data or do not want to use cellular at all.

Cellular Data Network 

It means that AX Pro only use cellular data network to connect. This mode is usually used in poor network environment, like wired and Wi-Fi network are hardly connected. Besides, it can help you save network detecting time.

Tips

When you set Communication Mode as Cellular Data Network, the followings can help you use cellular data successfully: 

1. Keep MTU as default 1400, Access number as default *99***1#

2. Test SIM in mobile, make sure that your SIM card can call, send message and connect to the internet

3. The AX PRO default dialing includes most SIM card APN but not all. If the network is not connected, you need to search the SIM card’s APN by Google or ask your mobile operator then set up the SIM card APN manually and then restart it.

999

Download the FAQ

.

How to Download Multiple Recordings

Hikvision device support download/export multiple recording at the same time. This file will introduce three methods of multiple download recordings: local GUI, web page and iVMS-4200 software.

Method 1: local GUI 

On local GUI, we need turn to the button of File > Video. In this page, we could select search condition, time and camera channel which you want to download. After select, click “Start Search”.

After search, it will show all the recordings of the channel 1 default, and if we want to check other cameras recording, we need to select the Channel to switch to other channel. 

Then we could select the recordings and Export.

Method 2: Web page

Web page Log in the device via IP address on IE browser, turn to Playback page, select the camera which you want to check, click the download button in the lower right corner. It will pop up the download configuration page, in this page, we could select the camera/ type/ time, after search we could select the recording files and download.

Method 3: iVMS-4200 software

999

Download the FAQ

.

How to Solve DVR Live View Noise Issue of Hik-Connect

If there is noise of DVR in Hik-Connect when remote live view or sliding channel (switch to next screen), you can try the following methods to solve the problem.

1. If you connect a coaxial audio camera to DVR, please turn on Noise Reduction function in Hik-Connect to solve it.

2. If it’s not a coaxial audio camera, please change to coaxial audio camera then connect to DVR.

3. If you don’t want to change camera, please change camera Stream Type from video & audio to video and set DVR audio resource as local to solve the problem.

999

Download the FAQ

How to Solve IP Camera No Link Issue on PoE NVR

IP cameras could be added into PoE NVR with both Manual mode and Plug- and- Play mode.

When applying the Plug- and- Play mode, please kindly make sure it is Hikvision brand camera, and the password of the camera is the same as the NVR. For “No Link” issue, please enter NVR.

Menu – Camera – IP Camera, click Status icon of camera to check the error message first.

Scenario 1:

The user name or the password is wrong.

Solution :

If the IP camera has hard reset button, please turn off the camera (cut off the power). Then keep holding the button for more than 30 seconds. Meanwhile, power on the camera while holding the button. The device would be back to the inactive status. PoE NVR will automatically active and connect the camera.

If the IP camera doesn’t have hard reset button, please use SADP tool to reset camera password first. You can operate according to below steps:

1. Download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable.

3. Running SADP tool to search camera.

4. Select the device, and click the “forgot password” button.

5. If it has an export button, you can click it to export a device’s xml file and send it to our regional support team to reset password. 

6. Get import file from support team, then import file to reset device password.

(Note: Please set the new password of camera to the same as NVR’s.)

7. PoE NVR will automatically connect the cameras with same password.

Scenario 2:

Network is Unreachable

Solution:

If the camera is connected to NVR PoE port. 

1. Please download and install the latest SADP tool on your computer. You can download from below link: https://www.hikvision.com/en/support/tools/hitools/TS20200826033/

2. Connect your computer to one of PoE ports of NVR with network cable .

3. Running SADP tool to search camera, check device IP address.

4. Please access camera via web browser as following picture.

5. Go to Configuration – Maintenance – Default, default camera to factory settings, PoE NVR will automatically active and connect camera.

If the camera is connected to the PoE switch, please connect switch to NVR LAN port. The IP address of the camera must be in the same network segment as the IPv4 address of NVR. Then enter NVR Menu- Camera- IP Camera, select camera and click Edit icon.

Select Adding mode to Manual, enter camera IP address and correct password, then click OK to add camera.

Scenario 3:

IP camera does not exist

Solution:

“IP camera does not exist” means NVR does not detect the camera input.

Please check whether the camera is properly connected to the POE port of the NVR. You can try to change a shorter cable, change a PoE port or connect a external power supply to IP camera to test.

999

Download the FAQ

How to Solve Live View Error on iVMS-4200

This document displays how to solve common Live View Error on iVMS-4200. In order to get high performance, please kindly download and install the latest version of iVMS-4200 via the link: https://www.hikvision.com/en/support/download/software/ivms4200-series/

Case 1: HCNetSDK.dll[2] 

Case 2: Playctrl.dll[2]

Case 3: HCNetSDK.dll[5] 

Case 4: HCNetSDK.dll[91] 

999

Download the FAQ

.

One Picture to Solve 6 Errors about Unbind

If the bound account can not login and you can not access the device via local GUI, you could try to unbind device from Hik-Connect App or SADP tool.

How to Unbind Device via Hik Connect APP 

How to Unbind Device via SADP tool 

When you unbind the device and meet errors, hope this picture could help you to solve it.

Scenario 1:

“102060” “102075” or “Unbinding failed. Not support by the device.” on App/SADP or “unlinking timeout” on local GUI

Solution:

1. We recommend you login the previous account to delete the device, then add it to the new account.

 2. If the previous account can not login, you could choose third party DDNS name to get remote live view. Please refer this guide: How to Use Third Party DDNS Services V3.0.pdf (hikvision.com)

3. If necessary, please kindly connect the local support team for better solve this issue. 

Scenario 2:

“Operation Failed 7” or “Error code: 99 Network Connection Failed” or “Hik-Connect service is offline”

Solution:

1. Enable Hik-Connect function in device and make device Hik-Connect status is online.

2. If device Hik-Connect status goes online and offline frequently, change to a stable network or upgrade firmware then try again.

3. If the problem persists, contact support to confirm connection status.

Scenario 3:

“Incorrect Device IP Address”

Solution:

1. Make sure your mobile/computer connect to the same LAN as device connect to.

2. Connect device and mobile/computer to primary routing network in topological map.

3. Enable UPNP function of the router, try to upgrade device firmware and reboot the device.

Scenario 4:

Only the device in the same area with the app can be unbound from its account.

Solution:

Please confirm the area which the bound account belongs first.

1. Via App: Use new account with the same registered area information to unbind.

2. Via SADP: Make sure the geographic location of the device is the same as the area to which the bound account belongs.

3. If you don’t know the area information of the bound account, please contact support team help you confirm or assign registered area information.

Scenario 5:

Operating failed: 153

This error caused by inputting wrong password too many times and the user was locked.

Solution:

1. Reboot the device.

2.  Modify the LAN IP of the PC or mobile phone and try again.

Scenario 6:

The device cannot unbound from any account for more times.

Solution:

1. This error means the device have been unbound too many times during one day, and you could try to unbind after 24h.

999

Download the FAQ

.

Two Steps to Solve No Result of VCA Playback Search

If do VCA search on playback page of Hikvision device and there is no event result, please do the following 2 steps.

Notes: Before searching playback video, make sure you have configured recording schedule on Hikvision device. 

Step 1: Enable Dual-VCA on Web

(a) Login to web page of device as the below picture.

(a) Login to iVMS-4200 and click Setting button – Basic settings

(b) Go to Configuration –Video/Audio– Display Info. on Stream to tick the checkbox of Enable Dual-VCA then Save.

Notes: After above settings, do VCA search via web browser of the camera. If the device is DVR/NVR/HVR, except for configuration on web, we also need to do step 2.

Step 2:

If the device is DVR/NVR/HVR, login local GUI, click Configuration Button – Advanced – enable Save Camera VCA Data.

After above settings, search VCA playback as below:

(a) via web browser

(b) via local GUI on DVR/NVR/HVR

Notes: If search motion detection VCA playback, Enable Dynamic Analysis for Motion is necessary.

999

Download the FAQ

What Can We do If NVR Cannot View via Chrome

It is recommended to download ivms-4200 on your computer instead of viewing via Chrome browser.

If you want to use Chrome browser to view, download Plug-In first, install it and restart the browser, then you can view via Chrome. 

If ‘Download Plug-In’ does not show, it usually means that your NVR does not support live view via Chrome, in this situation, there are mainly 5 ways to solve the issue:

1. Turn to Configuration > Local > Live View Parameters > Protocol. Switch protocol from TCP to UDP, or switch from UDP to TCP, save and view in chrome.

2 & 3. Some devices support to check network resource statistics. Turn to Configuration > Maintenance > Network Resource Statistics. If the previous value of Input Bandwidth is almost equals to the latter value, please reduce bitrate.

For those device which cannot check Network Resource Statistics, you can reduce bitrate and resolution directly for a try.

Turn to Configuration > Video/Audio > Video

Reduce Resolution and Max. Bitrate, save and view in Chrome. The reference value are as follows: 

Resolution —Max. Bitrate

1080P(2MP) — 4096 kbps

720P(1MP) — 2048 kbps

704*528（4CIF） —- 1024 kbps 

528*384 （2CIF） —- 512Kbps

Please set your NVR Video Encoding type as your camera supports, which means if your camera only support H.264 please switch NVR Video Encoding to H.264.

4. If your NVR supports multiple video output interfaces, it is recommended that 1 camera only set 1 output interface. Although the other interfaces you configured and didn’t use, NVR is decoding which will occupy the encoding ability and may cause the issue. 

5. Open Microsoft Edge on Windows 10.

Turn to Setting > Default browser > Internet Explorer compatibility Under the “Internet Explorer compatibility” section, turn on the “Allow sites to be reloaded in Internet Explorer mode” toggle switch.

Click the Restart button, then you can view via Edge browser.

If you have done all the above, the issue is still not solved, contact local support and provide the following information:

999

Download the FAQ

.

This guide explains the setup for each option so that you can determine which one is best suited for your needs and scene.
.

.

How to find the camera’s light settings in its web interface:​

Even if the camera is connected to an NVR, before anything, you will need to log into the camera directly to access the advanced image and light settings to enable the different light modes, as these are not accessible from an NVR.
.

By default, your camera will be set to remain in ‘ColourVu only’ mode during low-light, meaning the white light will be constantly on when it is dark and never use its IR. The below sections will show you on how to configure the new ‘Smart Hybrid’ mode, ‘IR only’ mode, and ‘ColorVu only’ mode.
.

.

How do I set my camera to Smart Hybrid mode:​

This mode is utilises both the IR and white LEDs built into your camera. It is useful as it allows you to keep your cameras to stay discreet in IR mode while there is no activity in your scene, and then switch to full colour when a person or vehicle is detected by putting white light on the scene, providing you with all of the additional information a colour image offers while also acting as a deterrent.

Here are the steps to enable this mode:
.

How to Configure the Light Settings on Hikvision Cameras

How to Configure the Light Settings on Hikvision CamerasHow to Configure the Light Settings on Hikvision CamerasHow to Configure the Light Settings on Hikvision Cameras.

How do I set my camera to ‘IR only’ mode:​

This mode is recommended if you would like the camera to be as discreet as possible and your scene is dark at night, as the camera will use its IR LEDs all the time at night and then switch back to colour during the day, meaning the white light is never used.
.

.

How do I set my camera to ‘ColorVu only’ mode:​

This is the opposite to IR mode, as the camera will turn on its white light at night and keep it constantly on, meaning that its IR is never used. This mode is ideal if you are not worried about the camera being discreet and prefer a colour picture 24/7.
.

How do I set up events and email or push notifications on my Hikvision camera?

Video Analytics, or “VCA events”, are some of the most useful features available on a Hikvision camera. Using these will mean that your footage is analysed in real-time for any activity or abnormalities with your system that you would like to receive an alert for. The different events that are available currently (which ones are available varies which each model of camera) include:

This guide will cover the setup of three of the most popular event options:

Motion Detection – This is one of the first AI options that was introduced and will analyse your footage for any moving object in a specified part of your scene and can alert you as soon as it is detected. As it detects motion in its most basic sense, it uses less of a camera or NVR’s processing power than the other event options, meaning it is always available regardless of your video compression settings.

If you are not using a device with AcuSense then this option will give you the most false-positive alerts, as it offers the fewest ways for filtering out moving objects that you are not interested in, such as object size and the direction or duration of the motion.

Intrusion Detection – This is similar to motion detection in that it will alert you when a moving object is detected within a predefined “intrusion zone”. However, this is better if you want more control over when you are alerted as it will only notify you when a moving object enters the zone, rather than whenever movement occurs within it. This event type also allows you to specify the size of trigger objects, as well as how much of an object enters the zone and for how long before you are alerted.

Line Crossing Detection – This option is particularly useful for various entrances, boundaries, and roads, etc., as it allows you to draw a line in your scene so that you are notified when an object moves across that line. Importantly, you can specify the direction(s) of movement across the line on which you are notified. Like intrusion detection, you also have more control over the size of the trigger object and how much of it must cross the line.
.

Note – Before starting, you will need to check that your Default Gateway and DNS Server are correctly set up in your device’s network parameters, as these need to be right in order for you to be sent email notifications. To check these, please see part 2.​

​

.

Section 1: Setting up motion detection​

​

Step 1:​

Connect to your device’s web browser interface by browsing for its IP address and log into it. If it is recording to an NVR, then connect to this, as this is where you should set your events from.​

.

Step 2:​

Once you’re in, navigate to:​

​

Configuration → Event → Basic Event → Motion​

​

If you’re using an NVR, select your camera from the “Camera” dropdown.​

​

​

Note – To set one of the other VCA event options, you’ll need to go to “Smart Event” rather than “Basic Event”, where you will be shown a list of tabs with all the other available events on your camera. ​

​

Step 3:​

Tick the “Enable Motion Detection” box.​

​

​

Step 4:​

Decide if you want to enable “Dynamic Analysis for Motion”. When this is turned on, green squares will show on anything that triggers motion detection in the camera’s feed, which can help with identifying exactly what has triggered the event.​

​

​

Note – Cameras usually determine what is ‘motion’ in your scene by detecting pixel changes in the image, as a large amount of pixel change usually indicates movement. However, if there is lots of visible noise in your image due to gain control in low light, you will probably see a high number of false alerts on the camera. Using one of the more advanced event types, or the camera’s built-in LEDs to illuminate the scene, will help here. ​

​

Step 5:​

Once you’re happy with the view of your scene, click on the hexagon or “Draw Area” button in “Area Settings”, which will allow you to use your mouse to draw the area within which you would like motion detection to be active.​

​

On Easy IP 3.0 and earlier cameras, These areas will be indicated by a red grid or polygon that appears when you click on part of the scene.​

​

The newer cameras will get you to draw one solid shape for each of your detection areas by left-clicking to set each point of that shape. When you have set all the points that you need, right-clicking will complete the shape and allow you to draw any others that you need.​

​

To clear your zones, just click the cross or “Clear All” button.​

​

Note – If you are not using an AcuSense camera or NVR, then you should make sure that the edges of your detection zones are not on top of anywhere that is likely to see a lot of movement, shadows, or reflections (e.g. roads, foliage, windows or the sky), to mitigate the number of false triggers. ​

​

​

​

Step 6:​

If you’re using an EasyIP 4.0 camera, draw any more detection zones that you need by repeating step 5 above.​

​

​

​

Step 7:​

Adjust the “Sensitivity” bar if you need, which determines how sensitive the detection is to pixel changes. The higher the sensitivity, the more easily motion detection is triggered, meaning you will receive more alerts as a result.​

​

A good starting point for the sensitivity is 60, but you will likely need to tweak this yourself over time to identify the optimum setting for your scene.​

​

If there is lots of activity in your scene, then avoid setting the sensitivity too high so that you don’t receive lots of false-positive triggers.​

​

Note – In the case of Line Crossing and Intrusion Detection, the sensitivity setting refers to the amount of an object that is needed to cross the line, or enter the box that you’ve drawn, before the event is triggered. ​

​

​

.

Step 8:​

If you’re using AcuSense features, then use the “Detection Target” boxes to specify what you want to trigger the event. You can select both “Human” and “Vehicle” here if you are interested in both.​

​

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

.

Section 2: Setting up line crossing detection​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Line Crossing Detection​

​

If you’re using an NVR, select your camera from the dropdown at the top of the page.​

​

​

​

Step 2:​

Tick the “Enable Line Crossing Detection” box.​

​

​

​

Step 3:​

Click on the line button or “Draw Area” to draw your line on the video feed – you can move, rotate or resize however you like. ​

​

.

Step 4:​

Set your maximum and minimum target sizes by clicking the size filter buttons, and drawing these on the camera preview.​

​

Anything that crosses your line and is smaller than your minimum box, or larger than the maximum box, at the point of the line, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be slightly smaller than any car that’s near where I’ll draw my line, and the maximum to be slightly larger than a large HGV.​

.

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

​

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the box. There is no issue with ticking both “Human” and “Vehicle” here. ​

​

​

​

Step 6:​

Specify your “Direction”, which refers to the direction from which an object much cross your line to trigger the event. The different options available are explained beneath:​

​

A<->B – Any object crossing from either direction will trigger​

​

A->B – Any object crossing from side “A” to side “B” will trigger (In this case, from left to right)​

​

A<-B – Any object crossing from “B” to “A” will trigger (In this case, from right to left)​

​

​

​

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to cross your line before this is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend starting at 60 and then adjusting the bar over time until you find the best results. ​

​

​

​

Step 8:​

Use the “Line” dropdown to select and draw any more lines, repeating steps 2-8 above.​

​

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

​

.

Section 3: Setting up intrusion detection​

​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Intrusion Detection​

​

If connected to an NVR, select your camera from the dropdown at the top of the page.​

​

.

Step 2:​

Tick the “Enable Intrusion Detection” box.​

​

.

Step 3:​

Click on “Draw Area” to draw your intrusion zone (or “Detection Area”) on the video feed, which can be a 3 or 4 sided shape. Left-click on the camera preview to set each of these points. Once your zone is drawn, you can still move each of the points to change the shape to better fit your area of interest.​

​

Note – If the edges of your zone are very close to a road, foliage, or anywhere that is likely to see lots of movement, then you will likely see a number of false-positive alerts. This is because any movement on these lines can trigger the event. If you can, you should allow for a bit of a gap between these parts of the scene and your intrusion zone. ​

​

​

​

Step 4:​

Set your maximum and minimum target sizes by clicking the “Size Filter” buttons, and drawing these on the live camera feed above.​

​

Anything that enters your configured intrusion detection zone and is smaller than your “Min” box, or larger than the “Max” box, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be smaller than the smallest person I’d expect to see in that part of the scene, and the maximum to comfortably cover a very tall person.​

​

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

.

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the relevant box. There is no issue with ticking both “Human” and “Vehicle” here.​

​

.

Step 6:​

Now, adjust the “Threshold” bar as you need. This can be set between 1 and 10 seconds and refers to how long an object needs to be within your intrusion zone before triggering the event. For example, setting this to “0” will mean that the event is triggered as soon as a valid target enters your zone.​

​

.

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to enter your zone before the event is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend setting this to 60 and then adjusting the bar over time until you find the best results.​

​

​

​

Step 8:​

Use the “Region” dropdown to select and draw any more intrusion zones, repeating steps 2-6 above.​

​

​

Step 9:​

Click on the “Arming Schedule” tab and set this by filling in the hours you want the event to be enabled for in blue.​

​

Note – Please see section [1] step 9 above for a more detailed explanation on how to set your arming schedule. ​

​

​

Step 10:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

.

.

Section 4: Setting the Arming Schedule for your events​

Now that you have set your “Area Settings”, click on the “Arming Schedule” tab to set when the event will be active.

This will bring up a timeline with the week broken up into days and hours – depending on the device that you are using, it might look different to the grid below. If a period is filled in blue then the event will be active (or “armed”) for that hour; If the period is white, the event will be off.

Use your mouse to draw up the weekly Arming Schedule that suits. You can also use the popup box that appears when you click on any blue period to finely adjust the start arming times:
.

Clicking on the “Erase” button and then a blue period will allow you to clear the arming:
.

When you’re happy with this schedule, click “Save”.

.

.

Section 5: Setting up email & push notifications for your events​

.

Click on the Linkage Method tab on the event’s page (shown above), which is where you will set up your email notifications, as well as other alert types.​

​

The different options are explained below:​

​

Audible Warning: This will cause the NVR / browser to bleep when on event triggers.​

Send Email: This will set the NVR to email you on event triggers, with a screenshot of the camera’s view at the time.​

Notify Surveillance Centre: This refers to Hik-Connect and needs to be activated in order to receive push notifications in Hik-Connect.​

Full Screen Monitoring: This will get the NVR to automatically throw up a camera’s live feed in full screen during a trigger for an event set on that camera.​

​

​

.

.

To enable Hik-Connect push notifications:​

.

To set up push notifications, you need to make sure that Notify Surveillance Centre is ticked as a “Linkage Method”.​

​

You also need to make sure that push notifications are enabled for Hik-Connect in your phone’s settings. To enable them via the app, go to:​

​

More → Settings → Enable Push Notification​

​

​

……..

.

.

Camius offers tools, IP cameras, DVRs, and NVR software compatible with PC and Mac to expand the scope of your smart security camera system

Device Config Tool

Download Camius Device Config Tool

A lightweight Camius device scanner and configuration editor, use it to:

• Find and connect your Camius devices to your PC or Mac on your local network LAN
• Change your Camius devices network settings
• Upgrade Firmware on your Camius devices

Web client tutorials:

• How to configure an IP camera using a web browser
• How to configure NVR using a web client

Camius VMS Software compatible with PC and Mac

Download VMS Software for Windows and Mac

How to add a Camius device to the VMS software?

How to playback and download recordings on the Camius VMS (IP Camera, DVR, NVR software)

If you need support with Camius VMS software, please follow the steps:

• Step 1 – Register your Camius Device here
• Step 2 – Submit your support request here

This program, designed only for Camius IP cameras, DVR, and NVR recorders, turns your PC or Mac into a surveillance station; VMS stands for Video Management System; with it, you can:

• Group all of your Camius devices and view them, even from a remote location
• Access Device Configuration and change settings
• Record locally onto a disk attached to your computer
• Playback video and audio, locally and remotely.

Camius Security Software Tools

Read Also : Vivotek Shepherd setup and user guide

Video Player Software​

• This lightweight software is used for playing video/audio files backed up from your recorder on your PC or Mac.
• The user can back up footage from the recorder in MP4 or Camius proprietary format.
• Using Video Player, the user can take clear screenshots, trim the important parts of the video file and play multiple files simultaneously.

Download Video Player

Camius Smartphone App for iPhone, iPad, Android

• To add the Camius IP camera, DVR, or NVR to the Camius View app follow this How-to Guide
• If you can not access your Camius device in the app, we have ready troubleshooting steps

Download Camius View (iOS)​

Download Camius View (Android)​

Frequently Asked Questions

At Camius, we provide excellent technical support to Camius customers through useful FAQ pages, which contain how-to guides and troubleshooting recommendations. Our support team is knowledgeable, responsive, and always available to assist customers with any questions or concerns they may have. With detailed instructions and easy-to-follow steps, Camius’ FAQ pages offer valuable information to help customers get the most out of their products. Whether you’re a new or experienced user, Camius’ technical support is there to help you navigate any issues and ensure a smooth experience.

To submit a support ticket, please contact us at this link

How to add a Camius device to the VMS software?

After installing the VMS software, please click on the Home tab on the left and then on Home >> Device Management (Picture 1)

Picture 1

Option 1: If your device is in the same LAN (Local Area Network)

Click on the Auto Search tab and search for devices if you are in the same LAN (Local Area Network), as shown in Picture 2. Select the device, click Add, and insert the device’s username and password.

Navigate to the Home tab >> Main View, and expand ‘root’ on the left sidebar.

Click and drag your device into any blank rectangle, which should display all the available channels.

Option 2: If you are accessing the device remotely

If you are accessing the VMS / VMS Pro remotely (not in the same LAN), then navigate to the Home tab >> Device Management >> All Equipment. If devices were added successfully, they would be displayed here.

To add a new device remotely, click the icon + on the right top (Picture 3), which will open the ‘Add Device‘ dialog

Picture 3

Select the ID in the Login Type tab and enter P2P ID in the ID tab and click ‘Add‘ (picture 4)

Picture 4

You will see the added devices once you open the ‘Device Management’ tab (Picture 5). The green box under the ‘Status‘ column means your device is connected properly.

Picture 5

How to control your Camius device settings remotely

Once you have added the NVR to the VMS pro software, you can access it remotely from anywhere. Just make sure to add it using the P2P ID and not the local IP address, as shown in the following screenshots. Basically, you are accessing the NVR’s remote settings from the VMS software without a browser.

Once you are in Remote Setting, you can manage the NVR and control its settings.

Click the gear icon under Operation to access Remote Setting

You can access your Camius DVR, NVR or IP camera Remote Setting directly within the VMS Software on your Windows PC or Mac

High Tech 4K DVR and NVR software compatible with PC and Mac by Camius

Looking for reliable DVR or NVR software for PC and Mac computers?  Look no further than Camius VMS software which comes with Camius IP cameras. security NVR, DVR recorders!

At Camius, we know that security is a top priority for many people, whether you’re looking to protect your home or business. That’s why we’ve developed Camius VMS software to be the perfect solution for anyone who wants to manage and monitor their Camius security cameras easily.

With Camius VMS software, you can enjoy a wide range of features that make it easy to keep an eye on your property.

Some of the critical benefits of Camius DVR, NVR software for PC and Mac include the following:

1 – Easy Setup and Configuration:

Our software is designed to be easy to set up and configure, even for people without experience with video management software. Our user-friendly interface makes it easy to customize your settings, view live footage, and review recordings.

2 – Remote Monitoring:

With Camius VMS software, you can monitor your security cameras from anywhere worldwide, as long as you have an internet connection. This is a great option for people who want to monitor their property while away from home or the office.

3 – Advanced Search Capabilities & Remote Playback:

Our software includes advanced search capabilities that make it easy to find specific footage. Whether you’re looking for a specific time, date, or event, Camius VMS software can help you find what you’re looking for quickly and easily.

4 – Flexible Recording Options:

Our software offers a range of recording options, including continuous recording, scheduled recording, and motion detection recording. This means you can customize your recording settings to suit your needs and maximize your storage space.

5 – Multi-Device Support:

Camius VMS software is designed to work seamlessly with various Camius security NVR, DVR recorders, and IP cameras so you can easily integrate your existing devices into our system. The software is designed to work with a Windows PC and Apple Mac computers.

5 – Multi-Device Support:

Camius VMS software is designed to work seamlessly with various Camius security NVR, DVR recorders, and IP cameras so you can easily integrate your existing devices into our system. The software is designed to work with a Windows PC and Apple Mac computers.

Tailored Security Solutions

Homeowners

For homeowners, Camius offers security solutions that safeguard your family and property. Rest easy knowing you have eyes on your home at all times.

Business Owners

Businesses need robust security. Camius provides state-of-the-art solutions to protect your assets, employees, and customers.

Security Professionals

Security professionals trust Camius for its reliability and advanced features. Stay ahead of the game with cutting-edge technology and register as a Camius security systems installer

So, whether you’re looking to upgrade your existing security system or set up a new one from scratch, Camius VMS software is the perfect solution. Our software is reliable, user-friendly, and packed with features that make managing and monitoring your security cameras easy.

In addition to our software, we also offer a range of Camius security cameras and recorders designed to work seamlessly with our software. This means you can enjoy a complete security solution tailored to your needs and preferences.

At Camius, we are committed to providing our customers with the highest quality security products and services. Whether you’re a homeowner, business owner, or security professional, we have the expertise and experience to help you find the right security solution for your needs.

How to playback and download recordings on the Camius VMS (IP Camera, DVR, NVR software)

To play your DVR or NVR footage remotely on the VMS software, navigate to the Home tab >> Remote Playback (Picture 1).

Picture 1

See below the description of each function in the following picture and a table:

Then expand ‘root’ on the left sidebar (Picture 2), then click the checkboxes for cameras that captured the event (Pictures 3 and 4)

Picture 2

Picture 3

Picture 4

Next, on Calendar, you can choose which stream recording event type and click on the Calendar icon and the day of the event. Only days with recorded footage will have a red flag (Pictures 5 and 6).

Picture 5

Picture 6

Cameras will playback individually once you click the Play button and click on each camera’s timeline on the desired hour (Picture 7).

Picture 7

To download recordings follow the below steps:

Step 1: Select a video window that has enabled recording, and click  the download button in the playback control area. A dialog box is displayed, as shown in the following picture:

Step 2: Select the recording you want to download and specify the storage path.

Step 3: Click download.

How to configure Camius NVR using a web browser?

To quickly find the Camius DVR (digital video recorder) or NVR (network video recorder) IP address, visit camius.com/support to download and install the Camius Device Config Tool.

Web browser access

Click on the Camius NVR or DVR’s local IP or type it into your browser’s address bar. The latest Camius surveillance security camera recorders work with multiple web browsers, including Edge, Google Chrome, Mozilla Firefox, Edge, and Safari, and include the following models:

• TRIVAULT4K184R
• TRIVAULT4K184R2
• TRIVAULT4K2168R
• IPVAULT1128PR
• IPVAULT2256PR
• IPVAULT8256R

Use your admin username and DVR or NVR password to log in. Your recorder’s Configuration is under Remote Settings.

You can check the ‘Web Compatibility Mode‘ in the Camius NVR/DVR and even IP camera settings (this can be done from the Camius recorder’s local user interface (Via HDMI/VGA) and in the web browser viewer.

The below picture is based on the IPVAULT1128PR’s web browser view

Accessing web client through VMS software

For certain Camius DVRs, NVRs, and IP camera models, we recommend installing the VMS Software on your Windows or Mac computer to access the device’s remote settings since the VMS software has a built-in web client using the P2P ID. Here is the link to the guide on how to add the device to the VMS software. This applies to Camius IPVAULT2320P16N, SCOUT20PTZ, GUARDMA

Camius View is the smartphone app to view & control your DVR, NVR, and IP security cameras for home and business:

 .

The Smartphone Security Camera App Camius View offers complete access to your cameras from any location. The mobile app is available on iOS and Android App stores and is ready to link to your security cameras. You can use your smartphone security camera App to view and playback any Camius security camera. Download and install the Camius View iOS or Android app on your smartphone device:

How to add your PoE camera or Surveillance Recorder to the Camius NVR, DVR, or IP camera app

Download the Camius View app on the iOS or Android app store on your phone or tab.

On the first run, the app will require network access and other permissions; once authorized, the app will start a tutorial highlighting the add button.

To get to the add device button later, Tap on the top left menu icon and then on Devices to open the Device Manager page.

 Option 1: Search Online networks to add devices from your network on the device page, enter the password you set earlier, port 80 (for R-series recorders and IP cameras), and save. For the devices of non-R series, port 9000 is required.

Camius View Smartphone App 51

Option 2: While you have the QR code scanner active, point your smartphone’s camera to it and snap. To check if your NVR, DVR, or IP camera is online, disconnect your phone’s Wi-Fi briefly and let the app reload

You can also add your Camius device manually.

How to Use Camius View app

Read More : Hikvision How-To Tutorials Part1

DVR, NVR camera system Live View

Playback

Enabling Push Notifications

.

How to add a Camius IP camera, DVR, or NVR to the Camius View smartphone app?

Download and install the Camius View iOS or Android app on your smartphone or tablet.

On the first run, the app will require network access and other permissions; once authorized, the app will start a tutorial highlighting the add button.

To get to the add device button later, Tap on the top left menu icon and then on Devices to open the Device Manager page.

• Tap on the main menu icon

• Tap on the Devices iconto open the Device Manager page, and tap on the Plus icon ‘+’ to add a new device.

• Choose NVR/DVR/IPCAM and then select one of 3 ways to add a device to the app using a Search Local Network (option 1), QR Code Scan (option 2), or Add manually (option 3)

Option 1 – adding a Camius security device using Search Local Network

Ensure your iPhone, iPad, Android smartphone, or tablet is connected to the same local Wi-Fi network as the Camius NVR, DVR, or IP camera device.

Option 2 – adding a Camius security device using QR scan code (Recommended)

Live View

Playback

Push Notifications

Tap on theicon and then the Push Notifications icon, select the device and enable the desired per-channel motion detection alerts, disk error detection alerts, and more.

More about:

Why can’t I access my Camius IP cameras, DVR, and NVR on my Camius View app? 

If you can not access your Camius IP cameras, DVR (digital video recorder), or NVR (network video recorder) on the Camius View smartphone app, please check the below:

1 – Check if you are using the latest version of the Camius View app

On the App’s ‘Devices‘ page, make sure your recorder is added using P2P (ID) instead of IP (IP Address), and if in doubt, delete it and add it again. 

In the Media Port, make sure to enter the right port number:

2 – Make sure you’re connected to a reliable network on your phone 

3 – Check if your Camius IP camera or recorder is connected correctly to the LAN (Local network).

4 – Check for the IP address conflict

5 – Reset the Network settings of your Camius device

Navigate to Setup >> System >> Maintenance >> Load Default >> check the Network box and Apply

Camius Trivault DVR (local interface via HDMI)

Web browser view

6 – Check the Camius device network status 

Navigate to Setup >> System >> Information and check the Network Status if it shows ‘Connect success’.

If the above steps don’t help, submit a support request and include the device model number and the current ’Firmware/Software Version,’ which can be found using the Camius Device Config Tool

HDMI interface: DVR / NVR information is available under Setup >> System >> Information

Web browser view: information is available under Remote Setting >> System >> Information (web browser view)

7 – Wrong Password 

Before you add the Camius security device to the app, make sure to set a password  following the below setup guides:

We got you if you lost your IP camera or DVR NVR recorders password. Follow the below links on how to reset your device password:

You can not set a password on your Camius device using the Camius View app. 

Easy Steps for Password Reset – unlock your NVR, DVR

We got you if you forgot your Camius DVR or NVR recorder’s password. There are two ways to reset your Camius NVR or DVR password, which are described below.

OPTION 1 – applicable to Camius security NVR, DVR with a reset button

If your recorder has a reset button, press and hold it for 10 seconds; you will hear an audible confirmation. This will reset all settings, including the password, but not erase recorded footage on your hard drive. 

Picture 1 – Reset button of Camius 8 channel NVR [IPVAULT1128PR}

Picture 2 – Reset button of Camius 16 channel NVR [IPVAULT2256PR]

Picture 3 – Reset button of 32 channel NVR [IPVAULT8256R]

Picture 5 – Reset button of Camius 8 channel DVR [TRIVAULT4K184R, TRIVAULT4K184R2}

Picture 6 – Reset button of Camius 16 channel DVR TRIVAULT2168R, TRIVAULT4K2168R

OPTION 2 – applicable to Camius DVR or NVR recorders without a reset button

If your DVR digital video recorder or NVR network video recorder doesn’t have a reset button, please follow the below steps to receive a temporary password that is Mac ID and Date sensitive.

This applies to IPVAULT160P, IPVAULT1128P, IPVAULT2320P8N, IPVAULT2320P16N, IPVAULT82320-N, TRIVAULT184, TRIVAULT4K184, TRIVAULT4K2168

STEP 1 – Have your recorder connected to a monitor via HDMI or VGA output. 

Picture 7 – Mac ID and Date

STEP 2 – Once you have your device Mac ID and current date

Once you have your device Mac ID and current date, submit a support request here, select the subject as ‘Lost Password,’ and include the model number, Mac ID (xx-xx-xx-xx-xx-xx), and Date (MM/DD/YYYY) on your device. Make sure to use the correct email address.

IMPORTANT: Ensure to include the NVR/DVR recorder’s model number available on the recorder’s enclosure and box label or purchase details (order number and/or shipping address)
.

If you didn’t register your Camius device, we recommend you do it (click here); that will speed up the support request.

STEP 3 – Use the temporary reset password to Load the Default System settings, allowing you to set a new password for your Camius DVR or NVR.

IMPORTANT: Selecting all checkboxes in the Load Default menu will reset all your recorder settings.

Picture 8

Picture 9

Setting a New Password for your DVR or NVR

After your Camius DVR/NVR recorder restarts, you’ll need to set a new password.

Password requirements: 8–16 characters, a lowercase, an uppercase, a digit, and a special character.

The unlock pattern is optional for easy access.
Click on the tab ‘to Draw’ and set your unlock
pattern, then click ‘Apply’.

In addition, users can select or skip Password Recovery Questions & Answers.

.

.

How do I use a Hikvision NVR’s “Virtual Host” feature?

One of the most successful selling points of a Hikvision NVR to many small-setup customers is the “Plug and Play” functionality that simplifies the setup process of their surveillance system. However, plugging a camera directly into a port on the NVR, unfortunately, does not allow you to access the camera via its own internal LAN IP using a browser due to it being on the NVRs internal network, and this can significantly reduce the number of configuration options you have access to.

The NVR does allow you to configure many options for each connected camera, but some essential features are only accessible via connecting to the camera itself (such as audio codec options). This was of course a big problem previously.

With the advent of newer firmware and models of NVR, Hikvision has introduced a feature called Virtual Host. Activating this feature turns your NVR into a “host” for the cameras allowing you to connect to them via a browser. Essentially, the NVR forwards all traffic received from your browser to the appropriate camera you’re trying to connect to, eliminating the biggest problem of plug and play functionality.
.

Hikvision How-To Tutorials Part1

Read More : How to set up a Hikvision CCTV system.

Step 1:​

First of all, access your NVR via a web browser. If you do not know the LAN IP of your NVR, download Hikvision’s tool SADP tool, which scans your network for any Hikvision devices that are connected and allow you to see and change their network settings, including the IP address.​

​

Download SADP for Windows ​

Download SADP for MacOS​

.

Step 2:​

Once you’ve logged in, navigate to: ​

​

Configuration → System → Camera Management​

.

​

.

This screen displays all the connected cameras on your NVR. Notice that the final column labelled “Connect” is currently empty. We’ll be coming back here in a moment.​

.

Step 3: ​

Now, navigate to:​

​

Network → Advanced Settings → Other ​

​

Turn on the Enable Virtual Host option.​

​

Note – Your NVR will reboot when you click “Save”.​

.

.

​

Step 4:​

Now, navigate back to the Camera Management window from earlier. You’ll notice that the previously empty connect tab now features links for each camera currently connected to your NVR.​

.

​

Step 5:​

Click on any of these links to access the respective camera via your web browser:​

That’s it, you’re done!

This should be useful when you want to access options on your camera that your NVR doesn’t feature. If you have any further questions feel free to ask, we’re happy to help.

How Do I Configure the Camera’s Onscreen Display Text?

All Hikvision users will have seen that when you first log in to a camera the live view will have overlayed text stating the date & time and the default name of the camera “IPcamera 01″, depending on your requirements you may want to change some or all of this overlay text and below is the instruction for how to do that.

Method 1 – In a Web Browser

Log in to the camera and go to Configuration > Image > OSD Settings
.

Below we will take you through each of the above settings and what they do:

Character Set – This lets you select the characters/language the OSD settings use, by default all UK stock will come with this set as GBK for English characters but if you are a European customer and you want to enter special characters from your particular language (e.g. é, ü, ç, etc…) you can switch it to EUC-KR to access those characters (do this will require the camera to reboot).

Display Name / Date / Week – These tick boxes let you show/hide the camera name (Display Name), the current date (Display Date), and the day of the week (Display Week)

Camera Name – This box lets you set the displayed name of the camera, it will also change the name of the camera shown in the System menu and if added to an NVR it will change the name shown in the live view camera list and the Camera Management list.

Time Format – This dropdown lets you select how the time appears in your live view, either 24-hour format (00:00 – 23:00) or 12-hour format (00:00 – 12:00)

Date Format – This dropdown lets you select how the day, month, and year are displayed. Your options are DD/MM/YYYY (UK format), MM/DD/YYYY (US format), and YYYY/MM/DD (Chinese/International Standard format). You also have the option of separating the day, month, and year with either a “–” or a “/“.

Text OverLay – On most cameras, you should have the option to add up to 4 additional text overlays to the live view. You can use all of them or none of them depending on your requirements.

Display Mode – This dropdown lets you choose how the text behaves on screen, by default it will usually be set to Not Transparent & Not Flashing which means the text will obscure objects/people behind it and it will be onscreen all the time. You have the option to change it to one of the following – Transparent & Flashing / Transparent & Not Flashing / Not Transparent & Flashing – When set to transparent the text will become semi-transparent so that you can see objects/people behind the text and if set to flashing the text will flash on & off screen every few seconds (there are no controls for the flashing duration).

OSD Size – Technically this setting should adjust the size of the OSD text but we’ve found that when changing it there was little change to the text and so we would just stick to the default Auto option because this will allow the text size to adapt based on where you are viewing the live image (e.g. whether a small phone screen or a large TV).

Font Color – This dropdown lets you select the colour used by the OSD text, by default the camera will use Black&White Self-adaptive which means the text colour will automatically switch between black & white based on what is behind the text (e.g. if a person walks through the text) and for high-security sites, this can be an important feature for using the footage in court because the adaptive text shows that the image/text has not been manipulated in post. If the scenario requires it you can select Custom which will allow you to pick the text colour from a standard colour table.

Alignment – Again like OSD size this setting doesn’t appear to have a huge impact so we would just leave it as the default Custom and you can adjust the positioning/alignment of the OSD text by dragging the red boxes around the live view window above (these red boxes are only for adjusting the text position and will not appear on the actual live view image).

Method 2 – Via the NVRs GUI

You can access similar OSD settings from the NVR by going to Camera > Display and selecting the camera you want to configure.
.

Although, as you can see from the above screenshot you won’t get all the settings that can be found by logging into the cameras directly.

How do I stop my Hikvision NVR from beeping?

If a Hikvision NVR notices what it deems to be a critical error, or “exception”, it will make a constant beeping sound to draw your attention to this.

These exceptions can occur when:
.

Of course, ignoring these exceptions are not recommended. However, you can disable the beeping while you address whatever the issue is by following the steps below.
.

.

​

Step 1:​

Connect to your NVR in a web browser by using its IP address and logging in.​

​

Step 2:​

Check what the exception that is causing the beeping is in the NVR’s logs. To find these, go to:​

​

Configuration → System → Maintenance → Log​

​

Set the log search so that the “Major Type” is “Exception”, with the start and end time covering a period when the beeping has occurred.​

​

For example, you can see that it is an IP address conflict causing it in this case.​

​

Note – Camera disconnections will not cause the NVR to beep. ​

​

​

.

Step 3:​

Go to:​

​

Configuration → Event → Basic Event → Exception​

​

Find the “exception type” identified in step 2 in the dropdown on this page.​

​

.

Step 4:​

Select the exception shown in your logs from the dropdown.​

​

You will see that “Buzzer” is ticked as a “Normal Linkage” action, which is what is causing the NVR to beep.​

​

.

Step 5:​

Untick this, click “Save”, and the beeping should stop.​

​

.

..

.

2.After the Swann Security app is installed on your phone, the Swann Security app icon appears on the Home or Apps screen. Simply tap the app icon to launch the Swann Security app.

.

....

.

.

.

.

.

.

.

.

Once done, tap the Next button to proceed.

.

.

.

.

email, try checking the Junk/Spam folder. After that, tap the Done button to return to the Sign In screen.

If your phone’s GPS setting is turned off or the location is not accurate, tap to enter your address manually.

Providing your device location helps us personalize your experience on the Swann Security app and other Swann services. Once done, tap the Next button to proceed.

.

.

.

The Remember Me option allows you to save your login credentials so you don’t

have to sign in every time you open the app.

.

To pair your first Swann device, tap on the screen, as shown on the right. Then follow the in-app instructions to connect your device to your home Wi-Fi network and link it to your Swann Security account. Once the pairing process is complete, your device will be displayed on the Live View tab.

...

Note:

Swann Security Android App Manual

Read More : SwannView Plus app download and access

.

.

.

.

.

After you have paired your first Swann device,

....

you can add subsequent Swann devices via:

•the Pair Device menu option in the app menu, or

•the button in the Devices tab.

.

.

.

.

.

.

.

.

.

.

App Menu  Devices tab

.

During the pairing process, you’ll need to scan the device’s QR code which can be generally found on the top, bottom, or

back of the device. See the figures below for examples of where the QR code can be located.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

ID:990a1af6da5a

If your phone can’t scan the QR code

.

ID:990a1af6da5a

.

.

S/N:89052081900001

.

.

  .

At some point, you’ll see a prompt to rate

the app, just follow the prompt, if you want to rate and review the Swann Security App via the Google Play Store.

..

6

5

4

3

2

1

.

App Menu: Tap to open the menu where you can edit your account profile, pair a new device, download the app manual,

1

contact technical support, and more. See “App Menu” on page 10.

Activities Tab: Tap to obtain a detailed report of the current day and past week’s device activities. You can also turn on or off the Do Not Disturb feature, which is helpful when you want to stop receiving push notifications from the app at certain times, such as when you’re sleeping or in a meeting. For more information, see “Activities Tab” on page 23.

2

Playback Tab: Tap to access and playback the event recordings from your devices. For more information, see

3

“Playback Tab” on page 15.

Live View Tab: Tap to view live video feed from all your connected devices in multi-view screen as well as in single-view

4

where you can operate specific camera functions. For more information, see “Live View Tab” on page 11.

Modes Tab: Displays the icon of the currently active mode. Tap to manage modes and configure the behavior of your devices for the Home, Night, and Away modes. You can also set up schedules to automate mode changes. For more information, see “Modes Tab” on page 17.

5

Devices Tab: Tap to view and manage settings for your devices, check device status, perform general maintenance,

6

including firmware updates and device reset. For more information, see “Device Management” on page 24.

.

.

.

.

.

.

.

.

1

.

2

.

3

4

.

5

6

7

.

8

.

9

10

.

Add and manage the Secure+ plan subscriptions for your Swann Security devices.

1

Update your Swann Security account profile name, password, and address. See “Updating your Swann Security

2

Account Profile” on page 36.

3

Pair a new Swann device to your Swann Security account or re-pair an existing Swann device (for example, after the device has been factory reset).

View and manage camera event clips that were downloaded to your phone. See “Viewing Saved Recordings” on page 42.

4

(Selected DVR/NVR only) Link your Dropbox account to your Swann Security account which will enable you to save recordings using Dropbox as an external cloud storage. Refer to your DVR/NVR’s instruction manual for more information on activating the Dropbox feature.

5

Download the latest Swann Security app user manual (PDF file) to your phone. For best viewing experience, open the file using Acrobat Reader (available on Google Play).

6

Display the application version information, your phone model number and the Android OS version. You can also access the terms of service and privacy policy relating to the Swann Security app.

7

Open the Swann.com website where you can find and purchase the latest products to integrate with your current

8

Swann Security system.

9

Obtain technical support for your Swann Security devices. See “Additional Support” on page 48. Sign out of the Swann Security app.

10

.

.

.

1

2

3

4

5

6

.

.

.

.

.

7

.

.

.

.

.

.

.

8

.

Tap to configure settings for the Live View tab. You can hide, resize, or reorder device tiles to suit your preferences.

1

For more information, see “Live View Tab Settings” on page 14.

2

You can change the device tile layout on the screen between list, grid and hybrid (customizable small/large tiles) views.

The device name. You can rename the device via the Devices tab > Select the device > Name. Tap to refresh the live video feed if the streaming has stopped.

Check out other pages for More.

Applicable to: Cameras with YI IoT APP or any other brand cameras using YI IoT. YI IoT Light bulb camera is also applicable to this guide

YI IoT and YI Home are different apps, if you are looking for a guide to YI Home, check out: How To SetUp YI Home or Kami Camera

YI IoT Camera APP download

YI IoT supports Android and iPhone, you can download it from google play or app store.

Register your account and login

YI IoT only supports email registration, or you can sign in with Facebook.

Connect YI IOT Camera

Connect power

Before add YI IoT camera, please connect YI IoT camera to the power supply first.

After the device is successfully started, wait for about 20s, and you can start scanning when you hear a beeping sound.

Add camera

There are 3 ways to add a YI IoT camera, we recommend using ‘WiFi connection’ to add a YI IoT camera.

Click the ‘+’ icon, then click ‘Scan code binbing’, scan the QR code on YI IoT camera, the APP will show the recommended way to add.

Follow the instructions on the APP to add a YI IoT camera.

Can’t find the QR code on the YI IoT camera? You don’t need to scan the QR code, you can add the camera manually.

Add camera: WiFi connection

1. Select WiFi connection, make sure YI IoT camera is beeping, click ‘l heard the beep‘ > Next.

Drop drop sound

Note: Only when YI IoT camera beeps ‘drop-drop’, you can add YI IoT camera, no beep please reset YI IoT camera.

2. Enter your WiFi password, then click next.

If the app does not show your wifi, please make sure your phone is connected to wifi.

3. The app shows the QR code to YI IoT camera to scan, phone is 4-8 inches away from the camera, camera will issue a voice prompt for a successful scan.

After the camera issued voice prompts click “I heard Waiting to connect“, then enter the next step

YI IoT camera scan to QR code

You can turn on ‘try sonic binding’, to improve the connection success rate.

4. Wait for YI IoT camera to connect to wifi, set the camera name after successful connection.
The new YI IoT camera comes with free cloud storage, or click ‘<‘ to cancel.

Add camera: Hotspot config to wifi

1. Select ‘Hotspot config to wifi‘,make sure YI IoT camera is beeping, click ‘l heard the beep‘ > Next.

.

See also  YI IoT Light Bulb Camera Review and SetUp

.

Drop drop sound

Note: Only when YI IoT camera beeps ‘drop-drop’, you can add the camera, no beep please reset the camera.

2. Enter your wifi password, then connect the phone WiFi to the network with”CAM_ “the default password is: 12345678 and return to the APP

3.Back to YI IoT APP, wait for YI IoT camera to connect to wifi, set the camera name after successful connection.

How to use YI IoT Camera without Internet？

If you don’t have wifi, or use YI IoT camera without internet, you can use Hotspot direct connect.

But you can’t watch YI IoT camera remotely, you can’t receive alarm notifications, you can only use the simplest functions.

1. Select Hotspot direct connect, then connect the phone WiFi to the network with”CAM_ “the default password is: 12345678 and return to the APP

2. Go back to the app, click on to connect, and now you can use the camera.

Note: This mode can only be used if you connect to the camera’s hotspot wifi.

YI IoT Important Function Settings

Share the camera

Sharing the camera allows multiple phones to use the camera.

1. Click on the share icon > Share cameras with your family,You can choose QR Code or YI loT account to share.

Note: The other party needs to have a YI IoT account to add a camera.

QR Code Share

1. Select QR Code, Select the permissions available to share, and then tap Share.

2. Ask invitee to open the app and press the account icon in the lower right corner of the page.

Press the QR Code icon in the upper right corner and have your friend scan.

YI loT account Share

1. Select YI IoT account, select shareable permissions, enter the invitee’s YI IoT email address, and click Share.

2. YI IoT APP will send a notification to your invitee. Your invitee needs to confirm invitation in the App.

Recording Settings

The camera will only be displayed when the SD card is inserted SD card recording settings, inserting the SD card will, the camera will restart.

By default, the camera is activated with Event recordi, after activating motion detection, the camera will automatically record when it detects motion.

You can set the recording mode in SD card recording.

All time recording: The camera will record all the time and will not stop.
Event recording: Only record when an alarm event is detected

All-day Recording: 24-hour operation
Custom: You can set the time to start recording, (up to 3)

View Camera Recording

Click on the Activity to enter the interface, ‘‘ is the cloud storage video, ‘‘ is the SD card video.

The blue time indicates the time when there is video recording.

Motion Detection Settings

After turning on motion detection, the camera detects motion and the app will push an alarm notification.
The motion detection recording is set in the SD card recording.

You can set the detection sensitivity and notification frequency in Smart Detection, and you can also activate the alarm sound.

Motion Detection: Motion detection switch
Sensitivity Level – High：The camera will generate an alert and video when detecting the object slightly shaking.

Sensitivity Level – Medium：The camera will generate an alert and video when detecting the object moving at an moderate.

Sensitivity Level – LOW：The camera will generate an alert and video when detecting the object moving significantly.

Alert Frequency: Low – 10 minute，Medium – 5 minute， High – 1 minute
Schedule: Set alarm notification working time

Camera alarm sound: When activated, the camera will sound an alarm when it detects motion.

Motion tracking Settings

Motion tracking is activated in Camera Settings.
Motion tracking allows you to track moving objects, and the camera will follow the movement of the object.

.

See also  : Ubox 4G LTE Cellular Security Camera Guide

.

YI IoT Light bulb camera Setup

YI IoT Light bulb camera has the same function as a normal camera, the main feature is that it can be mounted on a light stand.
If your YI IoT camera supports Light, you can see the ‘‘ icon in the live screen. By clicking the ‘‘ icon, you can select the Light working mode.

Auto: When in night vision mode, the camera detects the movement of objects, the camera will start Light.

Manual switch: You can choose Open or Close to switch the Light manually.

YI IoT APP Interface Description

1. Watch 4 cameras at the same time 2. Add cameras

3. switch camera display 4. Share cameras

5. Cloud storage 6. Camera settings 7. alarm information

8. alarm information 9. cloud storage

10. personal information 11.Cloud Storage

12. Flip video screen 13. camera settings

14. save the video on the phone 15. voice intercom

16. sound switch 17. Screenshot

18. Full screen zoom 19. alarm message

20. view camera video 22. Control camera movement

Video Tutorials

YI IoT For PC

YI IoT supports Windows computers, and you can download the software here.

How To Add YI IoT Camera To Your Computer?

If you have added a camera to the YI IoT APP, you can use the camera on your computer by simply logging into your account.

1. Login to software, no account please register first.

2. Click ‘+’ , make sure your camera is beeping, click ‘I heard “Waiting to connect”‘.

Note: Only when the camera beeps ‘drop-drop’, you can add the camera, no beep please reset the camera.

3. Enter your wifi name and password, then click Please choose Wi-Fi

Note: The name and password are case-sensitive

4. Let the camera scan the QR code, If you hear “QR Code scan is successful”, please click Next.

5. Wait for the camera to connect to the wifi, click Save after successful connection.

7. Double-click the camera to watch the video.

YI IoT For PC Interface Description

Why add YI IoT camera failed？

Please check the following issues, then reset the camera and add it again.

I heard “wifi connection failed” or “wifi password error”

Weak WiFi signal, please move device or cell phone closer to WiFi router, or try rebooting WiFi router.
Make sure the wifi password is correct

I heard “Pairing has timed out”

Reset the camera and then re-add it.

What to do if I did not hear “QR Code scan is successful”?

How to reset YI IoT camera？

The camera can be reset only after the camera is started, Press and hold the reset button for 5 seconds.

Reset the sound of the YI IoT camera

Can YI IoT Camera connect to YI Home or Kami Home APP?

No, YI IoT can only connect to YI IoT camera.

.

See also : Security Camera Installation Guides

.

Why some YI IoT camera features I don’t have?

.

YI IOT CAMERA FAQ

Why do YI IoT cameras offline?

YI IoT camera keeps going offline, usually because it can’t connect to wifi.

1. wifi signal is weak, put the YI IoT camera close to the router
2. restart YI IoT camera, the camera will reconnect to wifi
3. Reset the camera and reconnect the YI IoT camera
4. Still keep offline, maybe the wifi module of YI IoT camera is faulty, we suggest contacting your camera seller

.

Why are YI IoT cameras often offline?

YI IoT cameras are often offline, usually for the following reasons

1. The wifi signal of the location where you put the YI IoT camera is too weak, you can strengthen your wifi signal or put the camera close to the router.
2. Memory card problems cause YI IoT camera offline, you can take out the memory card, and then see if the camera can work properly.
3. The above attempts are not working properly, it is possible that the wifi module of YI IoT camera is faulty, we suggest contacting your camera seller

.

Why can’t I control the YI IoT camera pan and tilt?

Please make sure your YI IoT camera supports pan and tilt
If you can’t respond to the control button, or can only control part of the pan and tilt, it means the camera is malfunctioning internally, please contact your camera seller

.

Why do YI IoT cameras often restart automatically?

The automatic reboot may be a problem with the power supply, power cable and memory card.
You can replace them in order to troubleshoot the problem, if it cannot be solved, then it may be a YI IoT camera hardware problem, please contact your camera seller.

.

I can’t find YI IoT APP in app store and google play?

YI IoT APP was deleted from app store and google play, you need to wait for YI IoT APP to be re-listed.

.

How can I connect the camera when the QR code on the YI IoT camera is damaged?

The two-dimensional code is not required, you can manually select the mode to connect the YI IoT camera.

.

Why does the YI IoT camera move in the opposite direction when tracking?

You need to contact your YI IoT camera seller in order to resolve this issue.

1. Ask for a replacement camera
2. You can solve the problem by upgrading the camera firmware, contact your camera seller to push the firmware.

.

How to solve the glass will reflect the night vision?

YI IoT camera can’t turn off the night vision light manually, so it can’t be solved, please keep the camera away from windows, glass, etc.

.

Forgot the PIN password of YI IoT camera

PIN password is set by the user,there is no way to retrieve PIN password.
If you forget the password, you can only reset the camera and reconnect the YI IoT camera.
Note: After resetting the camera, you can’t view the previous VIDEO.

.

What sd card does YI IoT camera support?

YI IoT camera supports Micro SD Card, minimum 8GB, class10 memory card.
We recommend using a SanDisk or Samsung Micro SD Card.

.

How do I return it?

Please contact your camera seller, camapp365.com does not sell cameras and is not a YI IoT person

.

Can camapp365.com solve my problem?

There are too many comments for me to reply to every question, but I will check and update the FAQ uniformly.

.

Every smart product from Wyze has a home in the Wyze app. From Wyze Cams to Wyze Thermostat, if it’s connected, you can manage it in the Wyze app. 

To get started with the Wyze app:

1.Download the Wyze app from the Apple App Store or the Google Play Store.
 

2.Once downloaded, tap the Wyze icon to open the app.

3.Create a Wyze account, and/or sign in to your Wyze account.

◦ To create a Wyze account:

1.Tap Sign up on the app screen.

2.Enter your email address, then set a password for your account.

3.Tap Continue.

4.Follow the on-screen instructions to finish setting up your account.

4.Connect your phone/tablet to your 2.4 GHz Wi-Fi network. 

◦ Note: You must be connected to a 2.4 GHz Wi-Fi network to set up a Wyze device.

5.Once you’re all set, tap on the + plus sign in the top left corner of the Wyze app then Add Device to set up your very first Wyze device!

• 

◦ 

·  

Additional Notes

Important: Update your Wyze app ASAP – 6/7/23

Update your Wyze app to 2.38 or newer to continue using your devices!

Here at Wyze, we take your security to heart and as technology advances, we need to ensure that our offerings are staying up with the times. In order to keep our commitment to protecting our users’ security, we wanted to inform you of some changes to the Wyze app.

As of 6/7/23, you will have 30 days before you will no longer be able to utilize your Wyze app if it is not updated beyond 2.38 for both Android and iOS devices. 

Once this change goes into effect, any installed Wyze apps that are versions lower than 2.38 will not be available for use. Please note that the latest Wyze app requires a minimum OS version to operate – Android 7.0+ or iOS 14.0+.

If you are using Home Bridge or other third-party apps (aside from Google, Alexa, or IFTTT), we have developed a portal for you to generate an API key and provided steps to update your script. You can find more info on this here.

Once we make this change 30 days from 6/7/23, your automations will not work if you do not update the script.

Wyze App Setup Guide

Read More : Uniview NVR Remote Access

Frequently Asked Questions:

What happens if I don’t update my Wyze app?

If you are not on the 2.38+ Wyze app version when the change occurs, then the app will stop working after a one-month grace period. If your Wyze app is on version 2.38 or above, no action is required. 

How do I know what app version I’m using?

To confirm the Wyze app is up to date: 

What happens if I can’t update my Wyze app?

We suggest switching to a newer device as soon as you can.

How will this impact Two-Factor Authentication?

Two-Factor Authentication should function as normal after updating to the 2.38+ Wyze app. If your Wyze app is not updated to this version or above after this change takes effect, you will be unable to sign into your Wyze account unless you’ve updated your Wyze app.

What will happen to my Wyze Service?

Your Wyze Service (Cam Plus, Cam Protect, etc.) should be all set after updating your Wyze app to version 2.38 or above.

How will this impact shared users?

Shared users will also need to update their Wyze app if they’re not already on version 2.38 or above. Once they’ve updated their Wyze app they should be all set!

.

Creating an API Key

If you are using Home Bridge or other third-party apps (aside from Google, Alexa, or IFTTT), we have developed a portal for you to generate an API key.

To create an API key:

To delete an API key:

Notes:

Log in using your API key:

Endpoint: https://auth-prod.api.wyze.com/api/user/login

POST Request

POST /api/user/login HTTP/2

Host: auth-prod.api.wyze.com

Keyid: <insert-keyid-here>

Apikey: <insert-apikey-here>

Content-Type: application/json

Content-Length: 100

{

 “email”:”<insert-email-here>”,

 “password”: “md5(md5(md5(password)))”

}

Response

HTTP/2 200 OK

Content-Type: application/json

{

 “access_token”:”lvtx.xxxxxx“,

 “refresh_token”:”lvtx.yyyyyy“,

 “user_id”:””,

 “mfa_options”:null,

 “mfa_details”:null,

 “sms_session_id”:null,

 “email_session_id”:null

}

To get a new access token:

Endpoint: https://api.wyzecam.com/app/user/refresh_token

POST Request

POST /app/user/refresh_token HTTP/1.1

Host: api.wyzecam.com

Content-Type: application/json

Content-Length: 100

{

 “app_ver”:”wyze_developer_api”,

 “app_version”:”wyze_developer_api”,

 “phone_id”:”wyze_developer_api”,

 “refresh_token”:””,

 “sc”:”wyze_developer_api”,

 “sv”:”wyze_developer_api”,

 “ts”:4070908800000

}

Response

HTTP/2 200 OK

Content-Type: application/json

{

 “ts”:””,

 “code”:””,

 “msg”:””,

 “data“:

 {

 “access_token”:””,

 “refresh_token”:””

 }

}

Notes:

Snooze Notifications

Quickly turn off notifications for as long as you need to with the snooze notification feature!

To snooze notifications, open your Wyze app and tap the bell icon in the upper right-hand corner. You can snooze notifications for 30 minutes, for 1 hour, until tomorrow, or a custom time frame.

To turn notifications back on, simply tap the bell icon again. You should get a Push notifications turned ON pop-up message to confirm the change.

Note: These options are only available for Wyze app 2.43 and above. Not sure what app version you’re on? You can find this in your Wyze app by going to the Account tab > About. You can compare your app version to the latest app version listed on our Release Notes & Firmware page.

.

How do I opt-in to Two-Factor Authentication?

New Wyze accounts now have Two-Factor Authentication (2FA) enabled by default, for better security and to help provide you with more control over who can access your account. But if you’re already a Wyze user, you can opt-in to 2FA with just a few taps.

There are three methods available for Two-Factor Authentication: 

To opt-in to Two-Factor Authentication:

Additional Notes:

2FA Updates and FAQs

On Thursday, September 1, 2022, we announced a new security update: Two-Factor Authentication will be enabled by default to sign in to the Wyze app. Related article: Two-Factor Authentication

This update is a big change, but also a big plus for better security. Below are a few answers to the most popular questions we’ve received regarding this 2FA update.

2FA Frequently Asked Questions

What is Two-Factor Authentication (2FA)?

Two-factor authentication is a method of securing your account with a secondary authentication token. This secondary token is generated after you enter your email and password and is sent to your mobile phone either by SMS or 3rd party Authenticator app (Duo, Google Authenticator, etc.).

What do I have to do right now for 2FA?

Nothing at all! As long as you know and have access to the email address on your Wyze account, you’re all set and no further action is needed at this time. 

How do I enable Two-Factor Authentication?

Follow the steps in this article to set up 2FA via SMS, email, or Authenticator app: Two Factor Authentication.

Is there an email option, not just SMS or app?

Yes! You can now set up email 2FA. You can see how here: Two-Factor Authentication

Is 2FA required, or can I opt-out?

Yes, you can opt out of 2FA, but it will be required to set up a new account. However, we strongly recommend enabling 2FA.

Will I have to go through 2FA every time I open the Wyze app?

Absolutely not. You will only have to go through 2FA when setting it up and whenever you fully sign out of the Wyze app, like by going to the Account tab and tapping Sign Out at the bottom. If you don’t sign out and attempt to sign back in, you will not have to repeat the 2FA process.

Want to just open the app to check your cameras and Wyze Services like usual? This hasn’t changed at all. No 2FA required if you aren’t logging into the app.

I live outside the US and cannot receive SMS. How do I enable 2FA?

No worries! You can set up 2FA with your Authenticator app instead, like Duo Security or Google Authenticator. Or, your email address will be used as usual with no action needed from you.

Can I use an Authenticator app instead of SMS?

Yes, you do not need to use SMS. Some popular (and free) Authenticator apps are Duo Security, Google Authenticator, Microsoft Authenticator, and LastPass. 

Will setting up 2FA impact my 3rd-party accounts like Alexa or Google Home?

We’re investigating how this will impact 3rd-party accounts. At most, you’ll have to re-link your Wyze account to Alexa or Google Home once more.

I share my Wyze account with other people. How will this impact us? Will we all have to set up and go through 2FA when signing in?

What if I set up 2FA and lose my phone? Will I lose all access to my Wyze devices?

Not necessarily! When setting up 2FA, you have the option to add a Backup Number. You will also be able to use the email 2FA option to regain access to your account when you get a new phone.

Worst case scenario: However, if you only set up 2FA with an Authenticator app, haven’t saved any backup codes from that app, do not have a Backup Number added, and you have also lost access to your email address, you will lose access to your Wyze account and devices.

What if I don’t have access to or can’t remember my email address?

If you’ve lost access to the email address linked to your Wyze account, you will lose access to your Wyze account when this change fully rolls out. Even if you don’t set up 2FA with SMS or an Authenticator app, you will be required to use the default email 2FA verification method whenever you sign in to your account (not when simply opening the Wyze app). 

Please recover your email address and regain access ASAP so you do not lose access to your Wyze account.

I want to change my email address. How will this impact 2FA?

Feel free to change your email address. 2FA hasn’t rolled out yet, and other verification methods like SMS and the Authenticator app will be optional. Just be aware than once you change your email address, you will be signed out of all devices. You must sign in to the app again and reach out to Wyze Support to restore access to any Wyze Services you’re subscribed to. 

However, if you set up 2FA then change your email address, you will be signed out of all devices. You will have to sign in again using your 2FA verification method on all devices.

Tutorials for Using the Wyze App

Welcome to the Wyze app!

We’re so glad you got your hands on a new Wyze product, and we’re here to help you get started with the Wyze app. Our app is your personal command center that lets you view your devices, manage their settings, and enjoy all the cool features you get with your Wyze subscriptions. Your phone or tablet can, dare we say it, rule [your own personal] world!

>> Ahead of the game? If you don’t have the Wyze app yet, download it on iOS or Android.

To get started with the Wyze app:

Home (the Home Screen)

The Home screen is what you first see when you open the Wyze app.

How to turn on Do Not Disturb for the Wyze app:

Tap the notification bell to turn on Do Not Disturb. No matter your other Notifications settings, you will not receive any notifications from the Wyze app.

Exception: Critical Alerts for Services like Wyze Home Monitoring will push through no matter your app settings.