How to Upgrade the firmware on DVR/NVR System?

This FAQ is for DVR/NVR, not for the camera.

There are 2 methods to upgrade the firmware of DVR/NVR. We suggest you use method 1. Please contact technical support to get an upgrading file first.

Here you can check the system’s current firmware build date. After upgrading, you can check if the build date changed.

Method 1

1. Copy the firmware file to a USB disk.

2. Insert USB disk to the USB port of DVR.

3. Go to the menu to upgrade.

Method 2

1. Connect your DVR/NVR to a router with a network cable.

2. Use a computer which also connected to the same router as DVR/NVR is connected to install upgrading software.

software download link support.annke.com/document/XM/General/tool/device_manager.exe

3. Run the software to upgrade.

Latest XMEYE firmware

.

Client Downloading and Installation

Please visit https://xmeye.org/xmeye-for-pc/ to download and install the VMS Client following the setup wizard.

Add the DVR system to the Client

Option 1: Add the DVR system automatically

Please make sure the DVR system and your PC are connected with the same router.

Step 1:

Please log in to the client with the default User Name (admin) and Password (admin).

Step 2:

Click OK to add the DVR system automatically.

Step 3:

Tap YES on the pop-up window of “This operation may modify the device’s IP address, whether to continue?”

Step 4:

The DVR you added will be listed on the interface of Device Manager after 10s searching.

Invalid Password:

The VMS Client cannot load the password of the DVR system automatically, you need to modify it by clicking .

Connected:

The DVR system is ready to use.

Offline:

Please check if the DVR system and PC are connected to the same router.

Timeout:

Network may be disconnected, please click to refresh.

Option 2 : Add the DVR system manually

Step 1:

Click Manual Add at the lower left corner on the interface of Device Manager.

Step 2:

Change the Login Type from IP to CloudID and enter the required information on the interface of Add Device.

Device Name:

Set a name for the DVR.

CLOUD ID:

Also called Serial Number. You can get it from Startup Wizard or by accessing System > Version.

Password:

Enter the password you set for the DVR system.

Live Video

Please click Home > Live View to view the live videos from all channels.

Video Recording

You can go to Home > OPERATION > Record Settings to set the disk in which the video will be saved for VMS Client.

Please go to Home > ADVANCE > Record Plan to set the detailed record plan.

Notes:

Video Playback

Click Home > Playback to check all the videos recorded.

Check the box before the channel(s) you prefer, select Type of the video, select the Begin and End time, then click Search to list the filtered videos.

Double click on the selected video files to play the video or select one video file, then click button to play the video.

Video Downloading(Backup)

Stay on the interface of Video Playback, click to download the selected video, while click to download the video fragment by time period in this video file. The file you downloaded will be saved to the default path on the PC.

You can go to Home > SETTINGS > Systems Config to modify the path.

The format of the file you downloaded is H264 and the file is encrypted. It only can be played by the exclusive media player and you can download it from here

.

.

Note: The product firmware can be divided into two categories: DVR and IPC, among which the DVR firmware includes NVR, DVR, and ADVR programs How to find the corresponding firmware

.

DVR XVR Firmware

.

IP CAMERA FIRMWARE

.

JUFENG FIRMWARES

.

BOUTIQUE PROGRAM FIRMWARE

.

HZXM WIN10 STYLE FIRMWARES

.

WIFI NVR FIRMWARE

.

NEW SILVER STYLE FIRMWARE

.

JUFENG IP CAMERA NEW FIRMWARE

.

PC CLIENT DOWNLOAD

.

MOBILE CLIENT DOWNLOAD

.

UPGRADES PACKAGES MODIFY TOOLS

.

SDK DOWNLOAD

.

PLAYERS CONVERTERS

.

The IVSEC brand comprises Australian selected components and hardware, and software servers for local updates within Australia. IVSEC has grown quickly while expanding and maintaining excellent customer service. For any enquiries, please contact our friendly staff.

My smartphone is showing “offline” or “connect close” in the IVSEC X mobile app?

When adding your Recorder or cameras to the IVSEC X mobile app if a message says “Offline” or the device status is showing “Connect close” please check the following:

Example of Offline message

Example of Connect Close message

1) Check that the QR code, username and password details have been entered correctly into the IVSEC X app

A. Connect HDMI LCD and USB mouse to IVSEC Recorder

B. Click on the 4-square / arrow icon on the bottom left-hand corner of the screen

C. Check the name shown in Current user:

Note: The default user is admin but this may have been modified by the installer

D. Open the IVSEC X app on your phone

E. Press the “Human” icon of the top left-hand corner of the app

F. Press “Device List’

G. Press the square icon with a pencil mark

H. Check the IP Address/ID is the same as the QR code located on top of the IVSEC recorder

I. HTTP Port / Client Port

J. Check the username is the same name as per point C (this is case sensitive)

K. Enter the correct password

L. Press Save or Apply

2) Check for Network Connectivity

A. Check that an ethernet cable is connected to the LAN port of your modem

B. Check that the other end of the ethernet cable is connected to the LAN/WAN port of the IVSEC Recorder

C. Check that the Green and Yellow LEDs light up after connecting the cable.

NOTE: If the LEDS do not light up then the IVSEC X app will not work. Try replacing the ethernet cable, if still no LEDS light up contact your installer

D. Connect an LCD and USB mouse to the recorder and check the “connect status” icon that appears on the bottom right hand corner of the taskbar (when LCD is connected to recorder). Ensure that the icon has a green tick as shown in below image

Refer to explanation below of other connection status:

3) Ensure you have the latest version of IVSEC X app installed on your phone. Check that your Android or Apple device has the latest software/firmware and security updates installed. Try un-installing, re-installing the app and add the device again

4) Power your modem and IVSEC Recorder off for 30 seconds. Power back on and wait 5 minutes for the internet connection to come back online.

5) If you are running a VPN app on your smartphone disable the app and try the IVSEC X app again.

Examples of VPN providers include Surfshark, NordVPN, Norton’s VPN.

6) Check the IVSEC Recorder substream settings

A. Using LCD and mouse connected to NVR go to setup – Record – Encode Check your NVR substream settings- “Substream” tab

Recommended substream settings to minimise mobile app bandwidth issue

Resolution: 640 x 480

Bitrate: 512kbps

B. Click Apply on bottom right corner

Please refer to YouTube link: Adjusting stream settings via IVSEC X Mobile app

or

Please refer to YouTube link: Adjusting Camera stream settings via NVR (LCD & mouse required)

7) Some older Samsung phones running Android 11 on the Telstra network may be unable to stream live view or the cameras will show as offline while connected to mobile data (4G/5G). The issue has been identified on the Telstra network where an Android update causes the APN to select IPv6 only. Click here for APN re-configuration (Applies to Telstra mobile customers only running Android)

8) Some Telstra NBN modem / routers may restrict access to cameras (firmware issue on the router). The cameras may be slow to appear or show as offline. Check the model number listed on the bottom of your Telstra router. Click on the documentation below which details the steps to configure port forwarding as a workaround to access your cameras

9) Connect to your wifi and perform a speed test – https://www.speedtest.net/

Click the GO button. If your upload speed result is 3Mbps or less, you should contact your Internet Provider to test your connection

10) Email service@ivsecurity.com.au for additional support

iVSEC X Mobile App

1. How to set up the IVSEC X app on my Smartphone

The IVSEC X app allows you to access your IVSEC cameras live view remotely, playback recordings and other useful features
Please refer to YouTube link: https://youtu.be/71mvg5QdsfY

Scan the appropriate QR code below to download the IVSEC X app

Apple Store | Google Play

2. My smartphone is showing “connect close” in the IVSEC X mobile app?

Click here for troubleshooting details.

3. How to reduce camera buffering when accessing IVSEC cameras on the mobile app.

If you have limited or slow Internet connection (either at home or on your smartphone) reducing the substream settings can help the cameras to show up quicker on the app

Video guide – How to modify the settings via the IVSEC X mobile app

Video guide – How to modify the settings via the Recorder using an LCD and mouse

Recommended substream settings
Resolution: 640 x 480 | Bitrate: 256 kbps

Recommended mobile stream settings
Resolution: 640 x 480 | Bitrate: 128 kbps

4. What does “Max User Playback” mean?

If you see “Max User Playback” when trying to playback footage in the app it means someone else is currently accessing playback either via the NVR or through the app. Restarting the NVR will clear this message.

Access via Windows / Mac

5. How to install setup the VMS Pro application for Windows.

Video Guide

NOTE: VMS for Windows setup is similar for Mac

Application download links available from ivsecurity.com.au or via the YouTube description

6. How to login to an IVSEC NVR or camera using Internet Explorer or Chrome

Refer to “How to upgrade my NVR firmware” FAQs. Once your NVR is upgraded to the latest firmware you will be able to log in using any browser using the NVR IP address.

7. How can I search for IVSEC devices on a network or change an IP address

To search for X range cameras and recorders on a network use the Device Config Tool.

8. How to setup the surveillance client on Windows

Please note surveillance client is no longer supported, refer to VMS Pro. For legacy installations please refer to YouTube links below:

Windows | Mac

9. My MAC is not letting me install any of the IVSEC applications

If your MAC blocks the app from opening click here for details

10. How to playback and export footage from surveillance client on a Mac

Watch Video Guide

11. How to get my old IVSEC app working (non X range NVR model)

Check the model number of your recorder (silver sticker either on the top or bottom of the recorder. If the model number does NOT have an X in the model number then click here for instructions on how to configure your non X range IVSEC NVR using port forwarding and DDNS.

Recorder

12. How to reset my NVR password?

Download IVSEC NVR Password Reset Procedure

13. How to perform NVR firmware update using a USB flash drive or online update

Watch Video Guide

14. How to setup motion detection on an IVSEC X-Range NVR

Watch Video Guide

15. How to export footage from an IVSEC X-Range NVR

Watch Video Guide

16. How to factory default an IVSEC X-Range NVR

Watch Video Guide

17. How to configure disk grouping for 16, 32 and 64 channel IVSEC recorders

The maximum number of channels (cameras) that can record to one hard drive is 16. If your recorder is compatible with disk grouping (e.g. NR316XB, NR316XC, NR532XA, NR564XA, NR564EXA and NR564EXB) you will need to configure disk grouping and ensure your cameras are recording. If you are using an NVR that is capable of 64 channels and have 64 cameras installed, you will need to install a minimum of 4 hard drives

16 cameras installed = 1 hard drive required (minimum)

32 cameras installed = 2 hard drives required (minimum)

64 cameras installed = 4 hard drive required (minimum)

Video – Disk grouping setup process

IP Camera

18. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

19. How to factory reset my IVSEC camera?

Download IVSEC Camera Reset Procedure (specific models)

20. How to Setup 3rd Party cameras onto an IVSEC X-Range NVR

Watch Video Guide
Download Device manager tool (for non X range IVSEC branded cameras)
Download IVSEC PTZ Search Tool (for non X range IVSEC branded cameras)
Hikvision camera setup using onvif
Dahua camera setup using onvif

21. How to add 2N IP Verso Intercom camera to an IVSEC NVR

Watch Video Guide

22. Camera image is randomly showing distortion on the bottom of the image

If you are experiencing distortion at the near the bottom of the camera image please click here for useful troubleshooting steps

23. Modifying White Light Settings

Some of the iVSEC camera range have inbuilt white lights (LEDs) that turn on at night as a deterrent to intruders and for colour recording at night. Please follow this guide to learn how to disable this function or have then turn on only when motion is detected.

Smart Home Integration

24. iVSEC – Alexa

Now it’s even easier to see what’s happening. Amazon Alexa can be used to stream live camera video to your Amazon Echo Spot or Echo Show device simply by speaking your commands. Follow this guide to learn how to connect to Amazon Alexa for voice control.

25. iVSEC – Google

Now it’s even easier to see what’s happening. You can ask your Google Assistant to show your Cameras on your TV with Chromecast. Read this guide to learn how to connect your cameras to your Google Assistant and enable voice control.

How to upgrade IVSEC NC323XD Camera Firmware For additional support go to https://ivsecurity.com.au/ or email service@ivsecurity.com.au Video will demonstrate how to upgrade IVSEC NC323XD camera firmware. NOTE: Firmware compatible with models NC323XD, NC531XB, NC512XC, NC512XD & NC528XC Download NC323XD firmware (link below) https://ivsecurity.com.au/support/fir… Copy the entire folder to USB flash drive Connect USB to NVR and watch video demonstrating how to perform the upgrade.

How to playback and export footage from surveillance client onto a MAC

How to playback and export footage from surveillance client onto a MAC To download Surveillance client and Device Config Tool (MAC) – https://www.dropbox.com/s/49enfbklip4… To download VLC for MAC – https://www.videolan.org/vlc/download… For more information visit https://ivsecurity.com.au/

.

The AXIS Camera Station service

The AXIS Camera Station service restarts often

The server can be overloaded which causes a long task queue and might also corrupt the databases.

Devices in AXIS Camera Station

Common issues

.

.

Device can’t be added

If the device was used in a different system before being added to AXIS Camera Station, a factory default of the device might be required

Can’t update device firmware through AXIS Camera Station

If it’s not possible to upgrade the camera from its webpage:

No devices found

AXIS Camera Station automatically searches the network for connected cameras and video encoders but can’t find any cameras.

Repeated message “Reconnecting to camera in 15 seconds”

This might indicate that:

Read Also : Senstar Thin Client User Guide 2024

Recordings

See Live view for more information about possible performance issues influencing recordings and playback.

Common issues

.

.

Recording doesn’t start

Recordings don’t start or stop after a few seconds.

It could be that the disk is full or that there is too much intruding data.

Recording gaps during continuous recording

Along with gaps, AXIS Camera Station alarms show “Recording errors”.

The gaps can occur for several reasons, such as:

Can’t play exported recordings

If Windows Media Player doesn’t play your exported recordings, check the file format. Exported recordings can be played using Windows Media Player (.asf files) and AXIS File Player (.asf, .mp4, .mkv). For more information, see Play and verify exported recordings in the AXIS Camera Station user manual.

Note

The player will automatically open all recordings that are in the same folder as the player.

AXIS File Player is a free software for video and audio playback. You can select to include it with the exported recordings, no installation is required. To play recordings, open AXIS File Player and select the recordings to play.

Recordings disappear

Recordings are only saved for a specified number of days. To change the number of days, go to Configuration > Storage > Selection.

If the storage becomes full, recordings will be deleted before the designated number of days.
To avoid a full storage, try the following:

Failover recording issues

The failover recording is not recording on the server after the connection is restored.

Possible causes:

.

The device is ideal for space-constrained environments due to its compact design while its web-based interface makes it easy to configure and manage. The Senstar A10D Thin Client™ is a secure, reliable, and cost-effective PC alternative designed to display 720p or 1080p video from network video quickly and easily. The device can be controlled via the web, or through the convenience of your smartphone.

.

Supported Touch Screen Monitors for Thin Client 2.0.1

AG Neovo – http://ca.agneovo.com/

iiyama ProLite – http://www.iiyama.com/us_en/products/prolite-t1731sr-1/

For more information, see the Release Notes in the downloads page: https://xnet.senstar.com/Xnet/Downloads/ThinClientUpdate.aspx

Senstar A10D Thin Client Firmware Upgrade

The following article outlines how to check for firmware updates through Thin Client.

Optionally, you can manually download the firmware upgrade from here and then click Upgrade from the Maintenance section, as shown in step 2.

.

onnect to Thin Client using SSH

Enable SSH in Thin Client

SSH is disabled by default and any time a factory restore is performed.

1. Open a web browser and enter http://thinclientIP/EnableSSH. Recommended browsers include: Mirosoft® Internet Explorer, Mozilla®, Firefox®, and Google Chrome™.

2. The message “SSH Successfully enabled” appears.

3. If you are using Linux go to command–line and enter ssh <username>@<IP address>. For example, ssh root@10.234.1.10. When prompted enter the password.

4. If you are using Windows® ensure a version of PuTTY is downloaded.

When you are done, you should consider disabling SSH. The link to disable SSH is http://thinclientIP/DisableSSH.

Cannot connect to ONVIF-compliant camera because no ONVIF stream available

Issue

Network cameras/encoders supporting ONVIF do not offer a way to set up an ONVIF stream/profile necessary for making an ONVIF connection from the Thin Client to the ONVIF-compliant device.

Solution

If the camera manufacturer does not provide a method for setting up ONVIF streaming profiles, use a third-party tool to do so. One such open source tool is the ONVIF Device Manager: http://sourceforge.net/projects/onvifdm/

Senstar Thin Client User Guide 2024

Read Also : Verkada Viewing Station setup and user guide

Device cannot connect to Video Source

Issue

The Thin Client cannot connect to Mobile Bridge, and you see an Invalid Video Source error when setting up or re-configuring the device as follows: “Unable to connect to video source. Please verify server address and credentials and try again.”

Solutions

All Thin Client Articles

.

Camera views contain blank camera panels

Issue

Thin Client camera views contain one or more blank camera panels on the web interface and/or the HDMI output monitor.

Solution

The Thin Client can decode up to 1920×1080 at 30 FPS in H.264, MJPEG, or MPEG4. Ensure you have at least one (1) camera stream configured at this resolution or lower.

Note: Camera streams above 1920×1080 resolution cannot be decoded to the camera.

The Thin Client device automatically selects an appropriate video stream based on the resolution of the panel the video is being rendered in. Thin Client will select the stream with a resolution that most closely matches the panel’s resolution without exceeding it.

Therefore, it is recommended to have one (1) stream at 1920×1080 and another stream at 800×450 as the Thin Client will select the best stream automatically based on the camera view layout selected.

Cisco 2960-X and Catalyst SG300 switch with Thin Client

Issue

Thin Client is not connecting to cameras, not displaying cameras, not working properly on the network.

Reason

The network port is ‘flapping’ that is, going up and down constantly and so the Thin Client cannot connect.

Source of Problem: Cisco Switches

The EEE (Energy-Efficient Ethernet) feature on the switch is the source of the issue. See Cisco bug report here:

https://quickview.cloudapps.cisco.com/quickview/bug/CSCus35889

Resolution

Disable the EEE feature on the switch. This resolves the issue with the Thin Client.

Edges of the Displayed Image are Cropped

Symptoms:

The edges of the displayed video images are cropped.

Probable Cause:

It is likely that overscan is enabled on the displays being used. Overscan is the term used to describe the situation when not all of an image is present on a viewing screen. By default most TVs and monitors are set to use overscan to compensate for potential artifacts at the edge of the screen from the incoming signal.

Solution:

Turn off overscan on all the displays being used. The procedure for this varies depending on the product; therefore, consult the documentation for your particular model for complete instructions.

Device does not power on

Issue

When you attempt to power on the Thin Client by plugging it in to a PoE switch, and one or more of the following occurs:

Solutions

HDMI output is not working or is cut off

Issue

The Thin Client is not displaying HDMI output on the monitor.

– or –

HDMI television output is partially cut off.

Solutions

Upgrading from a version older than 1.2.1.515

If you have a Thin Client version older than 1.2.1.515 do NOT update directly to Thin Client 2.01.

You MUST update to 1.2.1.515 first and then to 2.0.1.

The version number is displayed in the top left of the Web interface and in the About section at the top of the Settings page.

.

Connection Fails, Unable to Retrieve Live Video: Thin Client 2.1.0 – Mobile Bridge

Example Scenario:

When you connect a Thin Client to a PSA, the Mobile Bridge is installed with default values. The entered IP address is localhost or 127.0.0.1.

Issue:

Thin Client tries to retrieve live video and the connection fails.

Solution:

During Mobile Bridge setup, you must enter a unique IP address when Mobile Bridge is installed on the same machine as the Symphony Server. Do NOT enter 127.0.01 or localhost during the Mobile Bridge setup because the Thin Client will NOT be able to retrieve video via that Mobile Bridge.

Example:

.

Cannot Log into Thin Client Using Chinese Characters

Applies to Thin Client v2.0.0 and 2.0.1

Issue:

User tries but fails to log into Thin Client using Chinese characters in username or password.

Solution:

To set up your Thin Client so that users can log into the Thin Client using Chinese characters, you must modify Thin Client settings using the settings.sh script.

Note: To ensure settings are updated, it should print to screen, MBCodepage|936 or MBCodepage|950

If you run Mobile Bridge version 2.1.6 or newer, the code page is printed on start. Search for “Current encoding” in Mobile Bridge log:

Current encoding: xxxxx codepage: yyyyy

Thin Client 2.1.0 – Wrong time displayed in video decoration when connecting to cameras via Mobile Bridge

Issue:

When you connect to cameras via Mobile Bridge and you manually change the time in the Thin Client web interface, the time does NOT change on the video decoration. The time decoration in the video is always the time of the server to which the camera is connected.

Cause:

Thin Client converts the Symphony Server’s Coordinated Universal Time (UTC) to local time and displays it in the video decoration. The time decoration therefore is not affected by local system time.

Reason:

This is necessary because of historical video, which must show the converted time from the server.

Important: If the time is changed when connecting directly to the camera, the updated time is displayed in the video decoration.

.

2.2.0 Keyboard and Remote Control (CEC) Functions

* Mouse and touch control only.

Note: Consumer Electronics Control (CEC) has different trade names depending on the manufacturer. For example:

Touch Screen Monitor Not Working with Thin Client

Problem:

Touch screen monitor does not work with the Thin Client.

Issue:

The touch screen monitor must be on before powering on the Thin Client.

Resolution:

Ensure your monitor is on and restart the Thin Client.

Add Axis cameras with dewarped panoramic view to Thin Client devices

To see the video from an Axis fisheye camera in a dewarped panoramic view, you must manually add the camera using a direct connection with an RTSP URL.

Stream profile settings:

Thin Clients do not display video when connecting through Mobile Bridge

Symptoms

Thin Clients do not display video when connecting to Symphony using Mobile Bridge.

Probable cause

The Thin Clients are using TLS 1.0 and the Mobile Bridge is using TLS 1.2.

Solution

Configure the Thin Clients to use TLS 1.0.

SNMP settings for Thin Client devices

To connect to a Thin Client device using an SNMP browser, you must use the following settings in addition to the IP address of the Thin Client device.

.